Gefen GTV-HDMI-CAT5LR - Manuals

READ THESE NOTES BEFORE INSTALLING OR OPERATING THE EXTENDER FOR HDMI LONG RANGE • The Extender for HDMI Long Range uses 2 CAT-5, CAT-5e or CAT-6 cables for extension. If fi eld terminating cables, please adhere to the TIA/EIA-568-B specifi cation. • Maximum extension is 820 feet (250 meters) at a r...

3 Features • Extends high defi nition displays up to 820 feet (250 meters) from the source at 1080p • Supports resolutions up to 1080p, 2K, and 1920 x 1200 • Audio and video are transmitted over the CAT-5 cables with zero signal loss • Eliminates equipment noise in the viewing environment • Equalize...

4 Front Panel Back Panel 1 2 3 4 5 SENDER UNIT PANEL LAYOUT

5 1 HDMI Input Connect the HDMI source device to this input port. 2 RJ-45 Port (Video) This port accepts an CAT-5, CAT-5e or CAT-6 cable for transmission of the video and audio signals to the receiver. 3 RJ-45 Port (DDC) This port accepts an CAT-5, CAT-5e or CAT-6 cable for connection to the receive...

6 Front Panel Back Panel 1 2 3 4 5 6 7 8 RECEIVER UNIT PANEL LAYOUT

7 1 HDMI Output Connect the HDMI capable device to this output port. 2 Distance Control Dip Switches These 2 Dip Switches are used to adjust the video/audio signal for specifi c CAT-5 cable lengths. Please use the table on page 9 for more information on this setting. 3 Equalization Trim Pot This Tri...

8 How to Connect the Extender for HDMI Long Range 1. Connect the HDMI source device to the Extender for HDMI Long Range sender unit using the supplied HDMI cable. 2. Connect one pair of CAT-5, CAT-5e or CAT-6 cables between the sender and receiver unit’s RJ-45 Video and DDC ports. NOTE: If the sourc...

9 CONFIGURING THE EXTENDER FOR HDMI LONG RANGE The Extender for HDMI Long Range receiver has adjustment settings that may need to be made before an optimal video quality is achieved. The available adjustment options are listed below. Distance Control The Dip Switches related to distance control will...

1 2 3 4 5 6 7 8 Gefen has specifi cally engineered their products to work with the TIA/EIA-568-B specifi cation. Please adhere to the table below when fi eld terminating cable for use with Gefen products. Failure to do so may produce unexpected results and reduced performance. CAT-5, CAT-5e, and CAT...

11 1 2 3 Remove the rubber feet covering the screws off the bottom of the unit. Remove the screws. Line up the mounting plates and screw it on to the unit. Mounting Plate Installation MOUNTING PLATE INSTALLATION

12 Video Amplifi er Bandwidth ....................................................................... 165 MHz Single Link Range/Max. Resolution ........................................ 1080p/1920 x 1200 Input Video Signal .................................................................................