Gefen GEF-3GSDI-FO-141 - Manuals

Page 2 - ASKING FOR ASSISTANCE

Technical Support : Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday through Friday, Paci fi c Time For 24 / 7 support, see the back of the product for the support number Write To: Gefen LLCc/o Customer Service20600 Nordhoff St Chatsworth,...

Page 3 - CONTENTS

CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Connector Layout 5 Connector Descriptions 6 Connecting and Operating The 3GSDI Fiber Optic Extender 7 Troubleshooting 8 Speci fi cations 9 Warranty

Page 4 - INTRODUCTION; GefenPRO; fl; The GefenPRO 3GSDI Fiber Optic Extender; ber optic cable supporting 1080p for 3G-SDI and HD-; How It Works; ber cable and converts it to an SDI signal.

1 INTRODUCTION Congratulations on your purchase of the 3GSDI Fiber Optic Extender. Your com-plete satisfaction is very important to us. GefenPRO In the realm of video distribution, certain features are invaluable in a commercial or broadcast environment. Accommodations such as a build-in power suppl...

Page 5 - OPERATION NOTES; READ THESE NOTES BEFORE INSTALLING OR; ber cable to a distance of up to 12 miles

2 OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE 3GSDI FIBER OPTIC EXTENDER • The GefenPRO 3GSDI Fiber Optic Extender will connect two 3G-SDI devices using an ST-terminated fi ber cable to a distance of up to 12 miles (20 kilometers.). HD-SDI can be extended up to 19 miles (30 k...

Page 6 - FEATURES; Features

3 FEATURES Features • Extends 3G-SDI up to 12 miles (20 kilometers) using single-mode fi ber. • Transports Multi-rate HD-SDI Digital Video over one fi ber optic cable. • Supports SMPTE-424M (3G-SDI), SMPTE-292M (HD-SDI), or SMPTE-259M (SDI) speci fi cations. • Automatic Input Equalization • Output C...

Page 7 - CONNECTOR LAYOUT; Receiver

4 CONNECTOR LAYOUT (shown with protective cover) 1 4 5 6 2 3 Receiver Sender 6 4 5 1 2 3

Page 8 - CONNECTOR DESCRIPTIONS; BNC Output Connector

5 CONNECTOR DESCRIPTIONS 1 BNC Output Connector Connect the Receiver to the input of the SDI display. 2 ST Fiber Connector Input Connect the ST-terminated fi ber cable to this connector. 3 5 V DC Power Supply Connector (Receiver) Connect this cable to the included 5 V DC power supply. 4 BNC Input Co...

Page 9 - CONNECTING THE 3GSDI FIBER OPTIC EXTENDER; How to Connect the 3GSDI Fiber Optic Extender

6 CONNECTING THE 3GSDI FIBER OPTIC EXTENDER How to Connect the 3GSDI Fiber Optic Extender 1. Connect the Sender of the GefenPRO 3GSDI Fiber Optic Extender to the 3G-SDI source equipment via the BNC connector. 2. Remove the locking protective cover from the fi ber connector of the Sender and connect ...

Page 10 - TROUBLESHOOTING; No picture / display shows a blank screen

7 TROUBLESHOOTING No picture / display shows a blank screen • Ensure that all jacks that are used by the 5 V DC power supplies are fi rmly connected. • Ensure that the SDI connector is fi rmly plugged in to the SDI source and SDI display. Ensure that the Sender and Receiver module parts are connecte...

Page 11 - SPECIFICATIONS

8 SPECIFICATIONS Signal Formats.....................SMPTE-424M 3G HD-SDI, SMPTE-292M HD-SDI, SMPTE-259M SDI Input Impedance...............................................................................................75 Ω Data Rate.......................................................................

Page 13 - Pb

*ma-GEF-3GSDI-FO-141* Rev A3 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.gefenpro.com [email protected] Pb This product uses UL listed power supplies.