Gefen EXT-HDMI1.3-1410-SIL - Manuals

Page 2 - ASKING FOR ASSISTANCE; Technical Support; Fax; Technical Support Hours:; any accompanying doc u men ta tion without prior written notice.; HDMI; are

ASKING FOR ASSISTANCE Rev A2 Technical Support : Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday, Pacifi c Time Write To: Gefen, LLC.c/o Customer Service20600 Nordhoff St Chatsworth, CA 91311 [email protected] Not...

Page 3 - CONTENTS

CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Panel Layout 5 Panel Descriptions 6 Connecting And Operating The 1:10 Splitter For HDMI 1.3 7 EDID Management 9 Specifi cations 10 Warranty

Page 4 - INTRODUCTION

1 Congratulations on your purchase of the 1:10 Splitter For HDMI 1.3. Your complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies. Gefen’s reli...

Page 5 - OPERATION NOTES; READ THESE NOTES BEFORE INSTALLING OR

2 OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE 1:10 SPLITTER FOR HDMI 1.3 • By default, display information from the display connected to HDMI output port 1 is sent back to the source. Therefore, the other displays connected to the 1:10 Splitter For HDMI 1.3 must be capable of...

Page 6 - FEATURES; • Deep; Maintains sharp HDTV resolutions up to 1080p Full HD and 2K; • 3DTV; Mono-LOKTM Locking HDMI Connectors; Package Includes

3 FEATURES HDMI 1.3 Features • 225 MHz (up to 12 bit YUV 444 supported @ 1080p) • Deep Color • Color Space Conversion • Dolby TrueHD and DTS-HD Master Audio • Lip-Sync Features • Simultaneously displays a single Hi-Def source on up to ten (10) HDTV displays without signal loss • Maintains sharp HDTV...

Page 7 - PANEL LAYOUT

4 Front Panel Back Panel 1 5 7 2 3 4 6 PANEL LAYOUT

Page 8 - Connect the included 24V DC power supply to this port.; PANEL DESCRIPTIONS

5 1 Reset Button This button will cycle power on the 1:10 Splitter For HDMI 1.3. If the EDID mode has been changed it will not take effect until the unit has been reset. 2 Activity Indicator This LED indicator will turn bright blue when an input signal is detected. 3 Power Indicator This LED indicat...

Page 9 - How to Connect the 1:10 Splitter For HDMI 1.3; Connect the HDMI or DVI (with a DVI to HDMI adapter or cable) source; Wiring Diagram for the Gefen 1:10 Splitter for HDMI 1.3; CONNECTING AND OPERATING THE 1:10 SPLITTER FOR HDMI 1.3

6 How to Connect the 1:10 Splitter For HDMI 1.3 1. Connect the HDMI or DVI (with a DVI to HDMI adapter or cable) source device to the 1:10 Splitter For HDMI 1.3 HDMI input port using the supplied HDMI cable. 2. Connect up to ten HDMI or DVI (with a HDMI to DVI adapter or cable) displays to the 1:10 ...

Page 10 - EDID MANAGEMENT; must

7 EDID MANAGEMENT EDID Mode Selection 1. EXTERNAL MODE : To use this mode, move the EDID switch to the Ext position. See page 8 for details on using the External EDID. 2. INTERNAL MODE : To use this mode, move the EDID switch to the Int position. This mode will use a preset EDID, from the factory, t...

Page 11 - External EDID Management; enabled

8 EDID MANAGEMENT External EDID Management The 1:10 Splitter For HDMI 1.3 features EDID Management. Before the source can send video or audio signals, the source device reads the EDID (Extended Display Identifi cation Data) from the output devices connected to the Splitter. The EDID contains informa...

Page 12 - SPECIFICATIONS

9 Video Amplifi er Bandwidth ....................................................................... 225 MHz Input Video Signal .............................................................................. 1.2 Volts p-p Input DDC Signal .................................................................

Page 13 - Proof of sale may be required in order to claim warranty.; PRODUCT REGISTRATION; under the Support section of the Gefen Web site.; WARRANTY

WARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notifi ed within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the e...

Page 15 - Pb

20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 fax: 818-772-9120 www.gefen.com [email protected] Pb Rev A2 This product uses UL listed power supplies.