Gefen EXT-FW-1394BP - Manuals

Page 3 - Technical Support; Fax; Technical Support Hours:; any accompanying doc u men ta tion without prior written notice.; Firewire 800 Extender Plus; is a trademark of Gefen Inc.; ASKING FOR ASSISTANCE

Technical Support : Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday. Write To: Gefen Inc.c/o Customer Service20600 Nordhoff St Chatsworth, CA 91311 [email protected] Notice Gefen Inc. reserves the right to make ch...

Page 4 - CONTENTS

CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Panel Layout 5 Sender Panel Descriptions 6 Receiver Panel Layout 7 Receiver Panel Descriptions 8 Connecting And Operating The Firewire 800 Extender Plus 9 Wiring Diagram 10 Specifi cations 11 Warranty

Page 5 - INTRODUCTION

1 Congratulations on your purchase of the Firewire 800 Extender Plus. Your com-plete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies. Gefen’s rel...

Page 6 - • The; OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING OR OPERATING THE FIREWIRE 800 EXTENDER PLUS • The fi ber optics cable must be treated carefully when connectors are exposed. They are susceptible to dust which can contribute to loss of pixels. • The Firewire 800 Extender Plus is housed in a metal box for better RF...

Page 7 - Features; Extends Firewire devices up to 1640 (500 meters) feet; Package Includes; FEATURES

3 Features • Extends Firewire devices up to 1640 (500 meters) feet • Transfer Rates of 100/200/400/800 Mbps • Compliant with IEEE 1394a and 1394b • Allows remote devices to operate in real-time, connected to the source • Works with Apple and PC computers • Uses fi ber optics to ensure long distance ...

Page 8 - SENDER PANEL LAYOUT

4 Front Panel Back Panel 4 5 6 1 2 3 SENDER PANEL LAYOUT

Page 9 - SENDER PANEL DESCRIPTIONS

5 1 Status LED This LED will become active once a stable link has been established between the sending and receiving units. 2 Power LED This LED will become active once the included power adapter has been connected. 3 Fiber Optic TX and RX Inputs Connect a LC terminated fi ber optic cable for both t...

Page 10 - RECEIVER PANEL LAYOUT

6 Front Panel Back Panel 3 4 1 5 6 2 RECEIVER PANEL LAYOUT

Page 11 - RECEIVER PANEL DESCRIPTIONS

7 1 Fiber Optic TX and RX Ports 1 Connect a LC terminated fi ber optic cable for both the transmit (TX) and receive (RX) signals between the Firewire 800 sending and receiving units. Optionally, this port can be used for extension to another Receiving unit to extend the signal. 2 Fiber Optic TX and ...

Page 12 - How to Connect the Firewire 800 Extender Plus; unit at the remote location.; CONNECTING AND OPERATING THE FIREWIRE 800 EXTENDER PLUS

8 How to Connect the Firewire 800 Extender Plus 1. Connect the supplied Firewire cable from the computer’s Firewire port into one of the fi rewire ports on the Firewire 800 Extender Plus Sending unit. The other port can be used for a local Firewire device. 2. Connect one pair of LC terminated fi ber...

Page 13 - WIRING DIAGRAM

9 CPU Firewire Extender Sender Firewire Extender Receiver Digital V ideo Camrecorder Fiber Optics Cable WIRING DIAGRAM

Page 14 - SPECIFICATIONS

10 Input Connector Type ................................................................................... 1394b Output Connector Type .................................................................................1394b Power Consumption Each Side ....................................................