Gefen EXT-DVI-444DL - Manuals

Page 2 - Technical Support; Fax; Technical Support Hours:; any accompanying doc u men ta tion without prior written notice.; x4 DVI DL Matrix; is a trademark of Gefen Inc.; ASKING FOR ASSISTANCE

Technical Support : Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday. Write To: Gefen Inc.c/o Customer Service20600 Nordhoff St Chatsworth, CA 91311 [email protected] Notice Gefen Inc. reserves the right to make ch...

Page 3 - CONTENTS

CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Panel Layout 5 Panel Descriptions 6 Connecting And Operating The 4x4 DVI DL Matrix 7 Confi guring The 4x4 DVI DL Matrix 9 RS-232 Serial Control Interface 10 Rack Mount Installation 11 Specifi cations 12 Warranty

Page 4 - INTRODUCTION

1 Congratulations on your purchase of the 4x4 DVI DL Matrix. Your complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies. Gefen’s reliable, plu...

Page 5 - OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING OR OPERATING THE 4X4 DVI DL MATRIX 4x4 DVI DL Matrix does not have any scaling functionality. All of the attached • monitors must be able to display the attached sources’ resolution. For maximum compatibility it is recommended that only one compatible/common resolu...

Page 6 - Features; sources on any four Dual Link DVI displays; Package Includes; FEATURES

3 Features Increases your productivity by letting you view any four Dual Link DVI video • sources on any four Dual Link DVI displays Maintains highest resolution digital video with no loss of quality • Discrete IR Remote (included) • Supports video resolutions up to 3840x2400 • Supports DDWG standar...

Page 7 - PANEL LAYOUT

4 Front Panel Back Panel PANEL LAYOUT 1 2 3 4 5 9 10 11 12 13 14 15 16 8 17 6 7

Page 8 - PANEL DESCRIPTIONS

5 PANEL DESCRIPTIONS Display 1 Selected Source LED 1 The array of 4 LED’s correspond to the 4 source inputs on the back panel of the 4x4 DVI DL Matrix. The currently selected source being displayed on DVI Output 1 will be indicated by an active LED. Display 2 Selected Source LED 2 The array of 4 LED...

Page 9 - How to Connect the 4x4 DVI DL Matrix; the supplied DVI DL cables.; CONNECTING AND OPERATING THE 4X4 DVI DL MATRIX

6 How to Connect the 4x4 DVI DL Matrix Connect up to 4 DVI DL sources to the 4x4 DVI DL Matrix input ports using 1. the supplied DVI DL cables. Connect up to 4 displays to the 4x4 DVI DL Matrix output ports using user 2. supplied DVI DL cables. Connect the supplied 5V DC power supply to the 4x4 DVI ...

Page 10 - OFF; The 4x4 DVI DL Matrix has a bank of 8 confi guration; CONFIGURING THE 4X4 DVI DL MATRIX

7 Remote Channel 1:Default 1 2 Remote Channel 2: 1 2 Remote Channel 3: 1 2 Remote Channel 4: 1 2 Remote Channel 1:Default 1 2 Remote Channel 2: 1 2 Remote Channel 3: 1 2 Remote Channel 4: 1 2 RMT-16-IR REMOTE CONTROL 4x4 DVI DL Matrix 1 2 3 4 5 6 7 8 OFF ON The 4x4 DVI DL Matrix has a bank of 8 conf...

Page 11 - AUTOMATIC LINK SELECTION / DUAL LINK ONLY MODE

8 AUTOMATIC LINK SELECTION / DUAL LINK ONLY MODE The 4x4 DVI DL Matrix has the ability to run both Single Link and Dual Link DVI sources. There is a feature that will either automatically select the link mode, or lock the unit in Dual Link mode. By default, Dip Switch 3 is in the OFF position (Autom...

Page 12 - RS-232 SERIAL CONTROL INTERFACE; Binary Table

9 RS-232 SERIAL CONTROL INTERFACE Binary Table ASCII Corresponding RMT16-IR Button Binary ASCII Corresponding RMT16-IR Button Binary 1 1 0011 0001 9 9 0011 1001 2 2 0011 0010 a 10 0110 0001 3 3 0011 0011 b 11 0110 0010 4 4 0011 0100 c 12 0110 0011 5 5 0011 0101 d 13 0110 0100 6 6 0011 0110 e 14 0110...

Page 13 - RACK MOUNT INSTALLATION

10 Rear of unit Front of unit Rack mount ears are provided for installation of this unit into a 1U rack mount space. Locate the side screws on the unit. 1. Remove the front 2 screws that are located closest to the front of the unit. 2. Using the removed screws, screw the rack mounting bracket into t...

Page 14 - SPECIFICATIONS

11 Video Amplifi er Bandwidth ................................................................. 2 x 165 MHz Input Video Signal .............................................................................. 1.2 Volts p-p Input DDC Signal ..................................................................