Gefen EXT-DVI-2-RGBSS - Manuals

Page 2 - Technical Support; Fax; Technical Support Hours:; any accompanying doc u men ta tion without prior written notice.; DVI to RGBS with Scaler; is a trademark of Gefen Inc.; ASKING FOR ASSISTANCE

Technical Support : Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday. Write To: Gefen Inc.c/o Customer Service20600 Nordhoff St Chatsworth, CA 91311 [email protected] Notice Gefen Inc. reserves the right to make ch...

Page 3 - CONTENTS

1 Introduction 2 Operation Notes 3 Features / Package Includes 4 Panel Layout 5 Panel Descriptions 6 Connecting and Operating the DVI to RGBS with Scaler 7 Operating the DVI to RGBS with Scaler 10 Output Signal Con fi guration 11 Speci fi cations 12 Warranty CONTENTS

Page 4 - INTRODUCTION; The Gefen DVI to RGBS with Scaler

1 INTRODUCTION Congratulations on your purchase of the DVI to RGBS with Scaler. Your complete satisfaction is very important to us. The Gefen DVI to RGBS with Scaler The DVI to RGBS with Scaler takes your DVI-I computer video card/HDTV video signal and converts it to analog RGBS formats. Now you can...

Page 5 - This device will not pass a DVI signal that contains HDCP.; OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING OR OPERATING THE DVI TO RGBS WITH SCALER • Output signal types are not confi gured through the on-screen GUI. To confi gure the output signal type of the DVI to RGBS with Scaler use the DIP switches located on the underside of the unit. Please see page 10 for outpu...

Page 6 - FEATURES; Features; Less then one frame delay allowing for gaming; Package Includes

3 FEATURES Features • Connects computers with DVI-D/DVI-I connectors to analog RGBS monitors or projectors • The output is either in the form of RGB, RGBS at sync 0.3V, RGBS at sync 5V, or YPbPr Component Video • Operates by infrared remote control and friendly On-Screen Display (OSD) menu • The inp...

Page 7 - PANEL LAYOUT; Front Panel

4 PANEL LAYOUT Front Panel Back Panel 1 5 7 6 8 2 3 4

Page 8 - PANEL DESCRIPTIONS

5 PANEL DESCRIPTIONS 1 IR Receiver This receiver will receive commands from an optional RMT-SR-IR remote control. This receiver requires line-of-sight to the IR remote control for successful operation. 2 DVI-I Input This receptacle will accept digital and analog signals. When using a analog VGA sour...

Page 10 - OPERATING THE DVI TO RGBS WITH SCALER; MAIN MENU; There are no options in this menu; COLOR; RED; Use this option to adjust the amount or RED in the video signal.; GREEN; Use this option to adjust the amount or GREEN in the video signal.; BLUE; Use this option to adjust the amount or BLUE in the video signal.; EXIT

7 OPERATING THE DVI TO RGBS WITH SCALER MAIN MENU This portion of the manual will be described using the front panel operation buttons. The following are the main menu options. Use the - and + buttons to choose your desired subcategory and press Menu to enter it. CONTRASTBRIGHTNESSFINE TUNECOLORSIZE...

Page 11 - SIZE; OUTPUT; TIMER

8 OPERATING THE DVI TO RGBS WITH SCALER SIZE Press the - and + buttons to select the SIZE option and press the MENU button to select it.. There are several sub-categories that are available for adjustment. Select the desired option using the - and + buttons and press the MENU button to begin adjustm...

Page 12 - OSD CONTINUED

9 OPERATING THE DVI TO RGBS WITH SCALER OSD CONTINUED BACKGROUND Use this options to adjust the opacity of the on-screen display’s background. EXIT Pressing the MENU button when this option is selected will return you to the MAIN MENU. FACTORY RESET This option will reset the entire unit to factory ...

Page 13 - OUTPUT SIGNAL CONFIGURATION; Dip Switches; HOW TO CONFIGURE THE DVI TO RGBS WITH SCALER OUTPUT SIGNAL

10 OUTPUT SIGNAL CONFIGURATION Dip Switches HOW TO CONFIGURE THE DVI TO RGBS WITH SCALER OUTPUT SIGNAL There is a bank of 2 dip switches on the underside of the DVI to RGBS with Scaler unit that controls which type of signal is output. Please remove the metallic tape on the underside of the unit to ...

Page 14 - SPECIFICATIONS

11 SPECIFICATIONS Video Amplifi er Bandwidth ........................................................................165 MHz Input Video Signal ...............................................................................1.2 volts p-p Input DDC Signal .................................................