Gefen EXT-COMPAUD-CAT5-444 - Manuals

Gefen EXT-COMPAUD-CAT5-444 – Manual in PDF format online.

Manuals:

Manual

Manual Gefen EXT-COMPAUD-CAT5-444

Summary

Page 2 - Technical Support; Fax; Technical Support Hours:; any accompanying doc u men ta tion without prior written notice.; x4 Component Matrix Over CAT-5; is a trademark of Gefen Inc.; ASKING FOR ASSISTANCE

Technical Support : Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday. Write To: Gefen Inc.c/o Customer Service20600 Nordhoff St Chatsworth, CA 91311 [email protected] Notice Gefen Inc. reserves the right to make ch...

Page 3 - CONTENTS

CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 4x4 Component Matrix Over CAT-5 Front Panel Layout 5 4x4 Component Matrix Over CAT-5 Front Panel Descriptions 6 4x4 Component Matrix Over CAT-5 Back Panel Layout 7 4x4 Component Matrix Over CAT-5 Back Panel Descriptions 8 4x4 Component Audio Ove...

Page 4 - INTRODUCTION

1 Congratulations on your purchase of the 4x4 Component Matrix Over CAT-5. Your complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies. Gefen’s...

Page 5 - OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING OR OPERATING THE 4X4 COMPONENT MATRIX OVER CAT-5 The extender functionality of the 4x4 Component Matrix Over CAT-5 requires • the use of the supplied 1 foot component video and audio jumper cables. These cables must be used to connect the component video and audio ...

Page 6 - Features; Switches easily between any four component/audio sources; Package Includes; FEATURES

3 Features Switches easily between any four component/audio sources • Sends up to four video inputs to any four remote displays • Maintains 1920 x 1200, 1080p, and 2k resolution video • Extends video up to 1000 feet over CAT-5 cable • Discrete IR remote (included) • Serial RS-232 remote port • Rack ...

Page 10 - Connect the included 24V DC power supply to this input.; X4 COMPONENT MATRIX OVER CAT-5 BACK

7 Component With Audio Extension Input 1 Connect the included jumper cables between the Component With Audio Outputs (Item 5 on this page) and these inputs. Inputs include component video, analog audio, and digital audio connectors. There are 4 inputs that are used in conjunction with the CAT-5 outp...

Page 11 - X4 COMPONENT AUDIO OVER CAT-5 RECEIVER

8 Front Panel Back Panel Top Panel 5 2 11 3 7 4 1 8 9 10 6 4X4 COMPONENT AUDIO OVER CAT-5 RECEIVER PANEL LAYOUT

Page 13 - LED Indicator; RMT-16IR REMOTE DESCRIPTION

10 The RMT-16IR remote control will allow the user to select which source each of the 4 connected displays will be viewing at the source location. Each of the 4 displays are assigned a group of 4 buttons that correspond to the 4 source inputs. Please use the information below when selecting the desi...

Page 14 - RMT-4IR REMOTE DESCRIPTION

11 Each extended location with a 4x4 Component Matrix Over CAT-5 Receiver can use an RMT-4IR remote control to choose which source will be viewed by the attached display. Pressing the numbered buttons will switch to the source connected to the same numbered input on the 4x4 Component Matrix Over CAT...

Page 15 - How to Connect the 4x4 Component Matrix Over CAT-5; Connect up to 4 component video/audio source devices to the 4x4; CONNECTING AND OPERATING THE 4X4 COMPONENT MATRIX OVER CAT-5

12 How to Connect the 4x4 Component Matrix Over CAT-5 Connect up to 4 component video/audio source devices to the 4x4 1. Component Matrix Over CAT-5 sending unit using the included 5 RCA component video/audio cables. Optionally, connect up to 4 digital coaxial audio source devices to the 4x4 2. Comp...

Page 16 - OPERATING THE 4X4 COMPONENT MATRIX OVER CAT-5 RECEIVER

13 The 4x4 Component Matrix Over CAT-5 Receiver can be placed at each remote location. Each receiver can switch between the four sources connected to the 4x4 Component Over CAT-5 Matrix sender. The unit has two methods of switching using either the direct selection buttons or the RMT-4IR remote cont...

Page 17 - ADJUSTING THE 4X4 COMPONENT MATRIX OVER CAT-5 RECEIVER; Brightness

14 ADJUSTING THE 4X4 COMPONENT MATRIX OVER CAT-5 RECEIVER Each 4x4 Component Matrix Over CAT-5 Receiver has two trim pots used to adjust the brightness and focus of the video output. These adjustment trim pots are located on the front panel of each unit. Please use the guidelines below for adjusting...

Page 18 - RMT-4IR REMOTE IR CODE CONFIGURATION; How to Resolve IR Code Confl icts; *DIP SWITCHES 3 and 4 are not used on the 4x4 Component Matrix

15 RMT-4IR REMOTE IR CODE CONFIGURATION 4x4 Component Matrix Over CAT-5 receiver Remote Channel 1:Default Remote Channel 4: Remote Remote Channel 1:Default 1 2 Remote Channel 2: 1 2 Remote Channel 3: 1 2 Remote Channel 4: 1 2 How to Resolve IR Code Confl icts In the event that IR commands from other...

Page 19 - Binary Table; RS-232 SERIAL CONTROL INTERFACE

16 Binary Table ASCII Corresponding RMT16-IR Button Binary ASCII Corresponding RMT16-IR Button Binary 1 1 0011 0001 9 9 0011 1001 2 2 0011 0010 a 10 0110 0001 3 3 0011 0011 b 11 0110 0010 4 4 0011 0100 c 12 0110 0011 5 5 0011 0101 d 13 0110 0100 6 6 0011 0110 e 14 0110 0101 7 7 0011 0111 f 15 0110 0...

Page 20 - Orange; NETWORK CABLE WIRING DIAGRAM

1 2 3 4 5 6 7 8 Gefen has specifi cally engineered their products to work with the TIA/EIA-568-B specifi cation. Please adhere to the table below when fi eld terminating cable for use with Gefen products. Failure to do so may produce unexpected results and reduced performance. CAT-5, CAT-5e, and CAT...

Page 21 - RACK MOUNT INSTALLATION

18 Rear of unit Front of unit Rack mount ears are provided for installation of this unit into a 1U rack mount space. Locate the side screws on the unit. 1. Remove the front 2 screws that are located closest to the front of the unit. 2. Using the removed screws, screw the rack mounting bracket into t...

Page 22 - SPECIFICATIONS

19 Video Amplifi er Bandwidth ....................................................................... 350 MHz Input Video Signal .............................................................................. 1.2 volts p-p Video Resolutions ...............................................................