Gefen EXT-AVSCALER-PRO - Manuals

Gefen EXT-AVSCALER-PRO – Manual in PDF format online.

Manuals:

Manual

Manual Gefen EXT-AVSCALER-PRO

Summary

Page 2 - Technical Support; Fax; Technical Support Hours:; any accompanying doc u men ta tion without prior written notice.; Audio/Video Scaler Pro with Amplifi er; is a trademark of Gefen Inc.; ASKING FOR ASSISTANCE

Technical Support : Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday. Write To: Gefen Inc.c/o Customer Service20600 Nordhoff St Chatsworth, CA 91311 [email protected] Notice Gefen Inc. reserves the right to make ch...

Page 3 - CONTENTS

CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Unit Panel Layout 5 Unit Panel Descriptions 6 Unit Panel Descriptions 7 Connecting The Audio/Video Scaler Pro with Amplifi er 8 RMT-SR-IR Remote Description 9 Operating The Audio/Video Scaler Pro with Amplifi er 15 RMT-SR-IR Remote Installation ...

Page 4 - INTRODUCTION

1 Congratulations on your purchase of the Audio/Video Scaler Pro with Ampli fi er. Your complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies....

Page 5 - OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING OR OPERATING THE AUDIO/VIDEO SCALER PRO WITH AMPLIFIER When initially powering on HDMI or DVI-D sources, it is important to have • the A/V Scaler Pro with Ampli fi er’s input selected to that source to ensure that the EDID (display information) is relayed properly....

Page 6 - FEATURES

3 Features Both digital and analog inputs are format converted and pixel re-scaled • through the Home Audio/Video Scaler Pro with Ampli fi er. It outputs a large range of formats and resolutions that will easily match the native resolution/ format of your display to ensure highest picture quality. D...

Page 7 - UNIT PANEL LAYOUT

4 Front Panel Back Panel 1 8 10 12 14 16 17 18 4 6 20 23 9 11 13 15 19 5 7 21 UNIT PANEL LAYOUT

Page 8 - UNIT PANEL DESCRIPTIONS

5 IR Receiver 1 This receivers will accept commands from the included RMT-SR-IR remote control. There must be line-of-sight between this receiver and the remote control for successful operation to occur. Power Indicator LED 2 This LED indicator will become active once the included 5V DC power adapte...

Page 9 - This button will reset the unit and cycle power off and on again.

6 UNIT PANEL DESCRIPTIONS Reset Button 10 This button will reset the unit and cycle power off and on again. Digital Audio Output Ports 11 There are two digital audio output types, S/PDIF (coaxial) and TOSLINK (optical). Both digital outputs are always active. HDMI Output Port 12 Connect the HDMI cap...

Page 10 - How to Connect the Audio/Video Scaler Pro with Amplifi er; CONNECTING THE AUDIO/VIDEO SCALER PRO WITH AMPLIFIER

7 How to Connect the Audio/Video Scaler Pro with Amplifi er Connect source devices to the Audio/Video Scaler Pro with Ampli fi er using 1. user supplied cables. The following input options are available. Composite - Single RCA video cable. S-Video - Single s-video cable. Component - 3 RCA video cabl...

Page 12 - OPERATING THE AUDIO/VIDEO SCALER PRO WITH AMPLIFIER; Entering the Menu System; Picture Mode; Only the USER option will allow customized video; fl

9 OPERATING THE AUDIO/VIDEO SCALER PRO WITH AMPLIFIER Entering the Menu System Pressing the Menu button on the included RMT-SR-IR remote control will display the GUI (graphical user interface) for adjustment options. The GUI is overlaid onto the outgoing video to the display. Therefore, the selected...

Page 13 - VIDEO CONTINUED

10 OPERATING THE AUDIO/VIDEO SCALER PRO WITH AMPLIFIER VIDEO CONTINUED Press OK to begin adjusting settings. Use the LEFT and RIGHT buttons to change settings. Press the OK button once the desired settings are made. Contrast Adjusts the contrast in increments of 1 on a scale of 1 to 100 (default 50)...

Page 14 - Adjusts the image’s horizontal position on the screen.; OUTPUT; Native

11 OPERATING THE AUDIO/VIDEO SCALER PRO WITH AMPLIFIER VIDEO CONTINUED H-Pos (Horizontal Position) Adjusts the image’s horizontal position on the screen. Adjusts in increments of 1 on a scale of 1 to 100 (default is 50) • V-Pos (Vertical Position) Adjusts the image’s vertical position on the screen....

Page 15 - COLOR

12 OPERATING THE AUDIO/VIDEO SCALER PRO WITH AMPLIFIER COLOR Press OK to begin adjusting settings. Use the LEFT and RIGHT buttons to change settings. Press the OK button once the desired settings are made. Color Tone Sets the color for the appearance of white. Only the USER option will allow customi...

Page 16 - Remote Channel; AUDIO; Source; Coaxial is also know as SPDIF

13 OPERATING THE AUDIO/VIDEO SCALER PRO WITH AMPLIFIER OSD (ON SCREEN DISPLAY) CONTINUED Remote Channel Sets the remote channel for use with the RMT-SR-IR remote control. If the selected channel in this menu and does not match the channel set in the RMT-SR-IR remote, the unit will cease to respond t...

Page 17 - AUDIO CONTINUED; Volume; INFORMATION

14 OPERATING THE AUDIO/VIDEO SCALER PRO WITH AMPLIFIER AUDIO CONTINUED Volume Adjusts the ampli fi ed speaker output volume. The volume can also be accessed by using the UP (volume up) and DOWN (volume down) buttons on the included RMT-SR-IR remote control when not in the GUI. Adjusts in increments ...

Page 19 - How to Resolve IR Code Confl icts

16 Remote Remote Channel 1:Default 1 2 Remote Channel 2: 1 2 Remote Channel 3: 1 2 Remote Channel 4: 1 2 How to Resolve IR Code Confl icts In the event that IR commands from other remote controls con fl ict with the supplied RMT-SR-IR remote control, changing the remote channel will alleviate this i...

Page 20 - Binary Table; RS-232 SERIAL CONTROL INTERFACE

17 Binary Table ASCII Corresponding RMT16-IR Button Binary Corresponds to Input 1 1 0011 0001 Input Cycle 2 2 0011 0010 Composite 5 5 0011 0101 Component 6 6 0011 0110 HDMI 1 g 16 0110 0111 HDMI 2 RS232 Settings Bits per second ...........................................................................

Page 21 - RACK MOUNT INSTALLATION

18 Rear of unit Front of unit Rack mount ears are provided for installation of this unit into a 1U rack mount space. Locate the side screws on the unit. 1. Remove the front 2 screws that are located closest to the front of the unit. 2. Using the removed screws, screw the rack mounting bracket into t...

Page 22 - SPECIFICATIONS

19 Digital Video Ampli fi er Bandwidth ............................................................ 165 MHz Component Video Bandwidth ................................................................... 350 MHz Input DDC Signal ............................................................................