Gefen DL - Manuals - manualsarea.com

Page 2 - Technical Support; Telephone; Technical Support Hours:; accompanying doc u men ta tion without prior written notice.; x1 DVI DL Switcher; is a trademark of Gefen Inc.; ASKING FOR ASSISTANCE

Technical Support : Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday through Friday. Write To: Gefen Inc.C/O Customer Service20600 Nordhoff St Chatsworth, CA 91311 Notice Gefen Inc. reserves the right to make changes in the hard ware, pack...

Page 3 - TABLE OF CONTENTS

TABLE OF CONTENTS Introduction Features Panel Desciptions Connecting and Operating the DL Switcher Operation Notes RMT2-IR Installation IR Code Confl icts / IR Extender Installation Specifi cations Warranty 1 2 3 4 5 6 7 8 9

Page 4 - Our Commitment; INTRODUCTION

Congratulations on your purchase of the Gefen 2x1 DVI DL Switcher. Your complete satisfaction is very important to us. Gefen’s line of KVM (Keyboard Video & Mouse), DVI, USB, switches, extenders, con-verters and hubs is designed to make computer use more comfortable, more productive and less exp...

Page 5 - FEATURES; Features

FEATURES Features • Saves money on hardware costs • Saves space on your desktop • Save time and increase your productivity • Maintains highest 3840 x 2400 x 60Hz resolution video • No loss of quality • Use either PC or Mac with USB keyboard/mouse • Switches easily between any two dual link DVI compu...

Page 6 - PANEL DESCRIPTIONS; DVI Out

PANEL DESCRIPTIONS 3 Power Indicator Infrared Eyes Selecter Indicates which input is selected Audio In 1 Audio In 2 Audio Out Contact Closure Interface - Connects to optional wired RMT-2 remote control 5VDC Input DVI In 1 DVI In 2 DVI Out USB Output USB In 1 USB In 2

Page 7 - CONNECTING AND OPERATING THE 2x1 DVI DL SWITCHER; How to Connect the DL Switcher to your devices

CONNECTING AND OPERATING THE 2x1 DVI DL SWITCHER How to Connect the DL Switcher to your devices 1- Connect the supplied cables from your fi rst computer into the DVI In 1, USB In 1, and Audio In 1 connection in the back of the DVI Switcher. 2- Connect the supplied cables from your second computer in...

Page 8 - x1 DVI DL OPERATION NOTES; Operation Notes

2x1 DVI DL OPERATION NOTES 5 Operation Notes When turning on or rebooting your computers, the DVI DL Switcher must be selected to the computer that is booting until the computer completes the boot cycle. This step can be eliminated using the Gefen DVI Detective, which stores the displays EDID. If yo...

Page 9 - Optional RMT-2 wired remote control

RMT2-IR INSTALLATION 6 1. Remove battery cover from the back of the RMT2-IR remote. 2. Verify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery, hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down. 4. Test ...

Page 10 - IR CODE CONFLICTS; In the event of IR confl icts, please do the following:; IR EXTENDER INSTALLATION; How to Connect the IR Extender; You should now be able to switch using the IR Extender.

IR CODE CONFLICTS In the event of IR confl icts, please do the following: 1. Remove the battery cover from the back of the RMT 2-IR remote. 2. Locate the Dip Switches above the batteries 3. Switch the Dip Switches on the RMT 2-IR to any of the combinations pictured below. 4. Dip Switches 1 and 2 in ...

Page 11 - SPECIFICATIONS

SPECIFICATIONS 8 Video Amplifi er Bandwidth .......................................................................... 2x 1.65 Gbps Input Video Signal ........................................................................................ 1.2 volts p-p Input DDC Signal ................................

Page 12 - Proof of sale may be required in order to claim warranty.; WARRANTY

Gefen Inc. warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen Inc. is notifi ed within two (2) year from the date of shipment, Gefen Inc. will, at its option, repair or replace the equipment, provided that ...