Gefen CAT-5 4000 - Manuals

Gefen CAT-5 4000 – Manual in PDF format online.

Manuals:

Manual

Manual Gefen CAT-5 4000

Summary

Page 2 - Technical Support; Fax; Technical Support Hours:; any accompanying doc u men ta tion without prior written notice.; ASKING FOR ASSISTANCE

Technical Support : Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday. Write To: Gefen Inc.c/o Customer Service20600 Nordhoff St Chatsworth, CA 91311 [email protected] Notice Gefen Inc. reserves the right to make ch...

Page 3 - CONTENTS

CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Panel Layout 5 Sender Panel Descriptions 6 Sender Panel Descriptions 7 Notes (Intensionally Left Blank) 8 Receiver Panel Layout 9 Receiver Panel Descriptions 10 Connecting The CAT5•4000 Extender Analog (VGA) 11 Connecting/Adjusting The CA...

Page 4 - INTRODUCTION

1 Congratulations on your purchase of the CAT5•4000 Extender. Your complete satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies. Gefen’s reliable, pl...

Page 5 - READ THESE NOTES BEFORE INSTALLING OR; Maximum distance ratings:; OPERATION NOTES

READ THESE NOTES BEFORE INSTALLING OR OPERATING THE CAT5•4000 EXTENDER • Maximum distance ratings: • VGA 1920x1200 60Hz is 330 feet. • DVI 1920x1200 60Hz is 130 feet. • DVI 1280x1024 60Hz is 300 feet. • VGA Supported resolutions: 640 x 480 through 1920 x 1200 • DVI Supported resolutions: 640 x 480 t...

Page 6 - Features; DVI video is transmitted digitally for zero signal loss; Package Includes; FEATURES

3 Features • Both analog and digital video signals are supported through the use of DVI-I inputs. • DVI video is transmitted digitally for zero signal loss • Supports resolutions up to 1080p, 2K, and 1920 x 1200 • Supports DDWG standard for DVI compliant monitors • Analog audio extension (For channe...

Page 7 - SENDER PANEL LAYOUT

4 Front Panel Back Panel 2 1 5 6 8 11 10 3 4 7 9 SENDER PANEL LAYOUT

Page 8 - SENDER PANEL DESCRIPTIONS

5 1 Power LED Indicator This LED will become active once the included 5V DC power supply is properly connected between the unit and an open wall power socket. 2 RS-232 Serial Communication Input 1-4 These inputs will support RS-232 serial communications devices. Only pins 2 (RX), 3 (TX), and ground ...

Page 9 - 0 Channel 3 DVI Input

6 SENDER PANEL DESCRIPTIONS 9 Channel 3 VGA/RS-232 and DVI/DDC RJ-45 Ports These RJ-45 ports connect the CAT5•4000 sender to a CAT5•4000 receiver unit using CAT-5, CAT-5e or CAT-6 cabling. When the input source is analog, the VGA/RS-232 port is used. When the input source is digital, the DVI/DDC por...

Page 11 - RECEIVER PANEL LAYOUT

8 Front Panel Back Panel 1 2 3 4 5 6 9 7 8 RECEIVER PANEL LAYOUT

Page 12 - RECEIVER PANEL DESCRIPTIONS

9 1 Brightness Trim Pot When using an analog input video source, use this Trim Pot to brighten/darken the output video. Please see page 11 for detailed instructions on the usage. 2 Focus Trim Pot When using an analog input video source, use this Trim Pot to blur/sharpen the output video. Please see ...

Page 13 - Channels 2 and 3; CONNECTING THE CAT5•4000 EXTENDER ANALOG (VGA)

10 How to Connect the CAT5•4000 Extender Using an Analog (VGA) Source 1. Connect up to three analog (VGA) sources to the DVI-I inputs on the CAT5•4000 sender unit. VGA to DVI-A cables/adapters will be necessary to make these connections. 3 VGA to DVI-A cables are supplied. 2. Connect an analog stere...

Page 14 - Remove the adjustment tool from the Trim Pot receptacle.

11 CONNECTING/ADJUSTING THE CAT5•4000 ANALOG (VGA) How to Connect the CAT5•4000 Extender Using an Analog (VGA) Source (Continued from the previous page) 6. For receivers connected to channel 1, connect a amplifi ed stereo output device to the RCA analog stereo audio outputs on the receiver unit. Cha...

Page 15 - CONNECTING THE CAT5•4000 EXTENDER DIGITAL (DVI); How to Connect the CAT5•4000 Extender Using an Digital (DVI) Source; port on the CAT5•4000 sender unit.; • Channel; Connect the port labeled DVI/RS-232 on the sender unit to the port; Connect the port labeled DVI/DDC on the sender unit to the port

12 CONNECTING THE CAT5•4000 EXTENDER DIGITAL (DVI) How to Connect the CAT5•4000 Extender Using an Digital (DVI) Source 1. Connect up to three digital (DVI) sources to the DVI-I inputs on the CAT5•4000 sender unit. DVI-D cables should be used to ensure that digital video is being transmitted. 2. Conn...

Page 16 - Insert a small fl at-head tool into the Equalization dial.

13 CONNECTING/ADJUSTING THE CAT5•4000 DIGITAL (DVI) How to Connect the CAT5•4000 Extender Using an Analog (VGA) Source (Continued from the previous page) 6. For receivers connected to channel 1, connect a amplifi ed stereo output device to the RCA analog stereo audio outputs on the receiver unit. Ch...

Page 17 - RS-232 SERIAL COMMUNICATION CONFIGURATION; RS-232 Serial Control

14 RS-232 SERIAL COMMUNICATION CONFIGURATION RS-232 Serial Control The RS-232 transmission from the CAT5 • 4000 receiver units must be confi gured for use on either channel 1 or on channels 2 and 3. By default, the CAT5 • 4000 units are confi gured to work on channels 2 and 3. To enable the RS-232 t...

Page 18 - SPECIFICATIONS

15 Analog Video Amplifi er Bandwidth ........................................................... 350 MHz Digital Video Amplifi er Bandwidth ............................................................ 165 MHz VGA Video Input / Output Connectors .................................... DVI-I 29-pin femal...