Gefen 4x4 HDTV Matrix - Manuals

Page 2 - Technical Support; Telephone; Technical Support Hours:; accompanying doc u men ta tion without prior written notice.; The 4x4 HDTV Matrix; is a trademark of Gefen Inc.; ASKING FOR ASSISTANCE

Technical Support : Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday through Friday. Write To: Gefen Inc.C/O Customer Service20600 Nordhoff St.Chatsworth, CA 91311 Notice Gefen Inc. reserves the right to make changes in the hard ware, pack...

Page 3 - TABLE OF CONTENTS

TABLE OF CONTENTS Introduction / Operation Notes Features Panel Layout Using the 4x4 HDTV Matrix RMT16-IR Installation Dip Switch Guidelines IR Codes RS-232 Interface 4x4 HDTV Matrix Rack Mount Diagram Specifi cations Terminology Warranty 1 2 3 4 5 6 7 8 9 10 11 12

Page 4 - INTRODUCTION; Thank you for purchasing the 4x4 HDTV Matrix.; OPERATION NOTES; READ THESE NOTES BEFORE IN STALL ING; • The 4x4 HDTV Matrix is housed in a metal box for better RF shielding.

INTRODUCTION Thank you for purchasing the 4x4 HDTV Matrix. The 4x4 HDTV Matrix switches four HDTV sources to any four DVI displays. The 4x4 HDTV Matrix switcher has four DVI inputs and four DVI outputs. Matrix input #1 and the DVI port of HDTV source #1 connects using a male to male DVI cable. The D...

Page 5 - FEATURES; Features; • Allows any HDTV display to view any source at any time

2 FEATURES Features • Allows any HDTV display to view any source at any time • Allows any source to be displayed on multiple displays at the same time • Maintains resolutions up to 1080p, 2K, and 1920x1200 • Maintains highest HDTV single link video resolution • Maintains highest HDTV digital audio s...

Page 6 - PANEL LAYOUT; Front Panel

PANEL LAYOUT 3 Display 1 LED Indicator Front Panel RS232 Contr oller Port Display 2 LED Indicator Display 3 LED Indicator Display 4 LED Indicator IR Sensor IR Extender Eye Port Power Indicator Back Panel Connects to 24VDC Power Supply DVI Inputs DVI Outputs

Page 7 - *Note for computers connected to the HDTV Matrix -; When your computer; USING THE 4X4 HDTV MATRIX

Connect all the sources to the DVI inputs on the 4x4 HDTV Matrix, using the supplied cables. Connect the HDMI/DVI displays to the outputs on the 4x4 HDTV Matrix. Connect the 24VDC powersupply to the 4x4 HDTV Matrix Controlling the 4x4 HDTV Matrix using the RMT16-IR: Pressing Buttons... Switches... 1...

Page 8 - RMT16-IR INSTALLATION; Remove battery cover from the back of the RMT16-IR remote.

5 RMT16-IR INSTALLATION 1. Remove battery cover from the back of the RMT16-IR remote. 2. Verify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery, hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down. 4. Tes...

Page 9 - DIP SWITCH GUIDELINES; How to open the 4x4 HDTV Matrix:

6 DIP SWITCH GUIDELINES Inside the 4x4 HDTV Matrix is a bank of Dip Switches. Below is a table describing their functions. By default, all switches are set to the Off position. Dip Switch # Name Description 1 Switching Delay Adds a 3 second delay to switching 2 On Board EDID Feeds a Generic HDMI EDI...

Page 10 - IR CODES; In the event of IR confl icts, please do the following:

7 IR CODES In the event of IR confl icts, please do the following: 1. Remove the battery cover from the back of the RMT16-IR remote. 2. Locate the Dip Switches above the batteries 3. Switch the Dip Switches on the RMT16-IR to any of the combinations pictured below. 4. Dip Switches 1 and 2 in the RMT...

Page 11 - Binary Table

RS-232 INTERFACE 8 Binary Table ASCII Corresponding RMT16-IR Button Binary ASCII Corresponding RMT16-IR Button Binary 1 1 0011 0001 9 9 0011 1001 2 2 0011 0010 a 10 0110 0001 3 3 0011 0011 b 11 0110 0010 4 4 0011 0100 c 12 0110 0011 5 5 0011 0101 d 13 0110 0100 6 6 0011 0110 e 14 0110 0101 7 7 0011 ...

Page 12 - x4 HDTV MATRIX RACK MOUNT DIAGRAM

Page 13 - SPECIFICATIONS

Video Amplifi er Bandwidth ................................................................................ 1.65 Gbps Input Video Signal ......................................................................................... 1.2 volts p-p Input DDC Signal .............................................

Page 14 - TERMINOLOGY

DDC Short form for Display Data Channel. It is a VESA standard for communication between a monitor and a video adapter. Using DDC, a monitor can inform the video card about its properties, such as maximum resolution and color depth. The video card can then use this information to ensure that the use...

Page 15 - Proof of sale may be required in order to claim warranty.; WARRANTY

Gefen Inc. warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen Inc. is notifi ed within two (2) year from the date of shipment, Gefen Inc. will, at its option, repair or replace the equipment, provided that ...