Gefen 4x4 HDTV KVM Matrix - Manuals

Page 2 - Technical Support; Telephone; Technical Support Hours:; accompanying doc u men ta tion without prior written notice.; The 4x4 HDTV KVM Matrix; is a trademark of Gefen Inc.; ASKING FOR ASSISTANCE

Technical Support : Telephone (818) 884-6294 (800) 545-6900 Fax (818) 884-3108 Technical Support Hours: 8:00 AM to 5:00 PM Monday through Friday. Write To: Gefen Inc.C/O Customer Service6265 Variel Ave.Woodland Hills, CA 91367-9897 Notice Gefen Inc. reserves the right to make changes in the hard war...

Page 3 - TABLE OF CONTENTS

TABLE OF CONTENTS Introduction / Operation Notes Features Panel Layout Using the 4x4 HDTV KVM Matrix RMT16-IR Installation Dip Switch Guidelines IR Codes RS-232 Interface 4x4 HDTV KVM Matrix Rack Mount Diagram Specifi cations Terminology Warranty 1 2 3 4 5 6 7 8 9 10 11 12

Page 4 - INTRODUCTION; Thank you for purchasing the 4x4 HDTV KVM Matrix.; OPERATION NOTES; READ THESE NOTES BEFORE IN STALL ING; • The 4x4 HDTV KVM Matrix works with all DVI and HDMI displays.

INTRODUCTION Thank you for purchasing the 4x4 HDTV KVM Matrix. The 4x4 HDTV KVM Matrix switches four DVI sources to any four DVI displays. Now you can easily switch four cross-platform computers to four digital displays. Our 4x4 HDTV KVM Matrix provides a simple, reliable and highly effective method...

Page 5 - FEATURES; Features

2 FEATURES Features • Increases your productivity by providing you with access to four computers from four workstations • Maintains highest resolution digital video with no loss of quality • Supports either PC or Mac USB keyboards/mice • USB 2.0 Matrix Switching capabilities • Supports analog audio ...

Page 6 - PANEL LAYOUT; Front Panel; Connects to 24VDC

PANEL LAYOUT 3 Display 1 LED Indicator Front Panel RS232 Controller Port Display 2 LED Indicator Display 3 LED Indicator Display 4 LED Indicator IR Sensor IR Extender Eye Port Power Indicator Back Panel Connects to 24VDC Power Sup ply DVI Inputs DVI Outputs USB & Audio Inputs USB & Audio Out...

Page 7 - *Note for computers connected to the 4x4 HDTV KVM Matrix -; When your; USING THE 4X4 HDTV KVM MATRIX

Connect all the sources to the DVI inputs on the 4x4 HDTV KVM Matrix, using the supplied cables. Connect the HDMI/DVI displays to the outputs on the 4x4 HDTV KVM Matrix. Connect the 24VDC powersupply to the 4x4 HDTV KVM Matrix. Controlling the 4x4 HDTV KVM Matrix using the RMT16-IR: Pressing Buttons...

Page 8 - RMT16-IR INSTALLATION; Remove battery cover from the back of the RMT16-IR remote.

5 RMT16-IR INSTALLATION 1. Remove battery cover from the back of the RMT16-IR remote. 2. Verify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery, hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down. 4. Tes...

Page 9 - DIP SWITCH GUIDELINES; How to open the 4x4 HDTV KVM Matrix:

6 DIP SWITCH GUIDELINES Inside the 4x4 HDTV KVM Matrix is a bank of Dip Switches. Below is a table describing their functions. By default, all switches are set to the Off position. Dip Switch # Name Description 1 Switching Delay Adds a 3 second delay to switching 2 On Board EDID Feeds a Generic HDMI...

Page 10 - IR CODES; In the event of IR confl icts, please do the following:

7 IR CODES In the event of IR confl icts, please do the following: 1. Remove the battery cover from the back of the RMT16-IR remote. 2. Locate the Dip Switches above the batteries 3. Switch the Dip Switches on the RMT16-IR to any of the combinations pictured below. 4. Dip Switches 1 and 2 in the RMT...

Page 11 - Binary Table

RS-232 INTERFACE 8 Binary Table ASCII Corresponding RMT16-IR Button Hex ASCII Corresponding RMT16-IR Button Hex 1 1 0011 0001 9 9 0011 1001 2 2 0011 0010 a 10 0110 0001 3 3 0011 0011 b 11 0110 0010 4 4 0011 0100 c 12 0110 0011 5 5 0011 0101 d 13 0110 0100 6 6 0011 0110 e 14 0110 0101 7 7 0011 0111 f...

Page 12 - X4 HDTV KVM MATRIX RACK MOUNT DIAGRAM

Page 13 - SPECIFICATIONS

Video Amplifi er Bandwidth..................................................................................1.65 Gbps Input Video Signal...........................................................................................1.2 volts p-p Input DDC Signal..............................................

Page 14 - TERMINOLOGY

DDC Short form for Display Data Channel. It is a VESA standard for communication between a monitor and a video adapter. Using DDC, a monitor can inform the video card about its properties, such as maximum resolution and color depth. The video card can then use this information to ensure that the use...

Page 15 - Proof of sale may be required in order to claim warranty.; WARRANTY

Gefen Inc. warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen Inc. is notifi ed within two (2) year from the date of shipment, Gefen Inc. will, at its option, repair or replace the equipment, provided that ...