GE UVW8364SPSS - Manuals

GE UVW8364SPSS Range Hood – User Manual in PDF format online.

Manuals:

User Manual

User Manual GE UVW8364SPSS

Summary

Page 2 - THANK YOU FOR MAKING GE APPLIANCES A PART OF YOUR HOME.; card included in the packing material.

2 49-2000708 REV. 0 THANK YOU FOR MAKING GE APPLIANCES A PART OF YOUR HOME. Whether you grew up with GE Appliances, or this is your first, we’re happy to have you in the family. We take pride in the craftsmanship, innovation and design that goes into every GE Appliances product, and we think you wil...

Page 3 - WARNING

49-2000708 REV. 0 3 SAFETY INFORMATION IMPORTANT SAFETY INFORMATION READ ALL INSTRUCTIONS BEFORE USING READ AND SAVE THESE INSTRUCTIONS WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: A. Use this unit only in the manner intended by the manufacturer. If...

Page 4 - How to Remove Protective Shipping Film and Packaging Tape

4 49-2000708 REV. 0 SAFETY INFORMATION IMPORTANT SAFETY INFORMATION READ ALL INSTRUCTIONS BEFORE USING READ AND SAVE THESE INSTRUCTIONS WARNING TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE: A. Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that ...

Page 5 - Controls; Chef Connect Operation Bluetooth; Chef Connect; Off

49-2000708 REV. 0 5 Controls USING THE HOOD: Controls Chef Connect Operation Bluetooth ® Connection To pair with another device: To start the pairing process on the hood, press and hold the Light button for 3 seconds. The backlight for all the icons will flash until the hood is paired with the range...

Page 7 - Grease Filter; Filters; Charcoal Filter (for recirculation installation only)

49-2000708 REV. 0 7 Be sure the circuit breaker is off and all surfaces are cool before cleaning or servicing any part of the vent hood. Grease Filter The filter traps grease released by foods from cooking.The filters must ALWAYS be in place when the hood is in use. The grease filters are dishwasher...

Page 8 - Stainless Steel Surfaces (on some models); Surfaces

8 49-2000708 REV. 0 Stainless Steel Surfaces (on some models) Do not use a steel wool pad; it will scratch the surface. To clean the stainless steel surface, use warm sudsy water or a stainless steel cleaner or polish. Always wipe the surface in the direction of the brush line. Follow the cleaner in...

Page 9 - INST; BEFORE YOU BEGIN; IMPORTANT; FOR YOUR SAFETY; Range Hoods

49-2000708 REV. 0 9 Installation Instructions “If you have questions, call GE Appliances at 800.GE.CARES (800.432.2737) or visit our website at: GEAppliances.com” INST ALLA TION INSTRUCTIONS BEFORE YOU BEGIN Read these instructions completely and carefully. ■ IMPORTANT — Save these instructions for ...

Page 10 - PRODUCT DIMENSIONS; Strain Relief I; Wire Nuts; REMOVE THE PACKAGING; CAUTION

10 49-2000708 REV. 0 Installation Preparation INSTALLATION PREPARATION PRODUCT DIMENSIONS 30” Models Requires a 30” opening. 36” Models Requires a 36” opening. TOOLS AND MATERIALS REQUIRED (NOT SUPPLIED) Wire cutter/stripper Level Aluminized duct tape Safety glasses Phillips screwdriver with at leas...

Page 11 - PLAN THE INSTALLATION; PARTS PROVIDED

49-2000708 REV. 0 11 INST ALLA TION PREP ARATION Installation Preparation PLAN THE INSTALLATION CAUTION To reduce risk of fire and to properly exhaust air, be sure to duct the air outside. Do not vent exhaust air into spaces within walls or ceilings or into attics, crawl spaces, or garages. PARTS SU...

Page 12 - INSTALLATION DIMENSIONS; Installation Preparation; DUCT COVER REQUIREMENTS

12 49-2000708 REV. 0 INSTALLATION DIMENSIONS The hood duct covers can be adjusted for different ceiling heights depending on the distance between the bottom of the hood and the cooktop (distance X). See Installation Height Table on the next page. Installation Preparation INSTALLATION PREPARATION DUC...

Page 14 - ADVANCE PLANNING; POWER SUPPLY

14 49-2000708 REV. 0 Installation Preparation INSTALLATION PREPARATION ADVANCE PLANNING Duct Install Planning ■ This hood is designed to be vented vertically through the ceiling with a 8” round duct or backwall using an 90º elbow and 8” round duct. ■ Use metal ductwork only. ■ Plan the route for ven...

Page 15 - DETERMINE HOOD, DUCTWORK AND WIRING LOCATIONS

49-2000708 REV. 0 15 INST ALLA TION PREP ARATION Installation Preparation NEW CONSTRUCTION, PRE-PLANNING, OR REMODELING NOTE: For existing construction, skip to the section below. ■ For ducted installation through the top, the 8" diameter hole for the duct in the ceiling must be centered 6-1/4&#...

Page 17 - INSTALL HOOD SUPPORT; INSTALL DAMPER

49-2000708 REV. 0 17 1 INSTALL HOOD SUPPORT IMPORTANT: Framing must be capable of supporting 100 lbs.• Locate at least 2 vertical studs for the installation bar by tapping drywall with a hammer or use a stud finder. • Level the installation bar and center left to right above the marked line. Hold ba...

Page 18 - (Alternate Mounting Method) INSTALL HOOD TO SOFFIT OR CABINET

18 49-2000708 REV. 0 INST ALLA TION INSTRUCTIONS Installation Instructions 4 (Alternate Mounting Method) INSTALL HOOD TO SOFFIT OR CABINET SKIP THIS STEP IF USING WALL MOUNTING METHODIMPORTANT: Soffit or cabinet framing must be capable of supporting 100 lbs.When necessary the hood may be installed s...

Page 19 - Installation Instructions; INSTALL MOTOR

49-2000708 REV. 0 19 Installation Instructions 5 INSTALL MOTOR 1. Align the motor exhaust with the top damper as shown in figure below. 2. Secure the motor to motor mounting plate using screws (D). 3. Plug the motor connector into the mating connector on top of the control housing. 6 CONNECT ELECTRI...

Page 20 - CONNECT DUCTWORK

20 49-2000708 REV. 0 INST ALLA TION INSTRUCTIONS Installation Instructions 7 CONNECT DUCTWORK A. Vented Installation • Connect the house ducting to the top damper as shown in image below. • Seal all connections with duct tape. CAUTION Do not use sheet metal screws at the transition to ductwork conne...

Page 21 - INSTALL DUCT COVERS

49-2000708 REV. 0 21 Installation Instructions 8 INSTALL DUCT COVERS • Duct Cover Accessories are available at GEApplianceparts.com or by calling 877.959.8688. See Accessories on page 27. • Follow instructions included with the duct cover accessory to install duct covers. 9 I NSTALL FILTERS • Follow...

Page 22 - MAKE UP AIR TECHNOLOGY

22 49-2000708 REV. 0 Installation Instructions MAKE UP AIR TECHNOLOGY This operation must be performed by a qualified technician or installer. Note to Installers and Inspectors : This product comes equipped with a simple installation feature that limits maximum CFM levels in order to comply with cer...

Page 23 - Notes

Page 25 - Before you call for service; TROUBLESHOOTING TIPS; Problem

49-2000708 REV. 0 25 Troubleshooting Tips ... Before you call for service Save time and money! Review the charts on the following pages first and you may not need to call for service. TROUBLESHOOTING TIPS Problem Possible Cause What To Do Fan/Light does not operate when button is turned ON A house f...

Page 26 - What GE Appliances will not cover:; LIMITED W; GE Appliances Vented Range Hood Warranty; EXCLUSION OF IMPLIED WARRANTIES; company

26 49-2000708 REV. 0 Staple your receipt here. Proof of the original purchase date is needed to obtain service under the warranty . GEAppliances.com All warranty service is provided by our Factory Service Centers, or an authorized Customer Care ® technician. To schedule service online, visit us at w...

Page 27 - ACCESSORIES; Looking For Something More?; Accessories; Parts

49-2000708 REV. 0 27 ACCESSORIES Looking For Something More? GE Appliances offers a variety of accessories to improve your cooking and maintenance experiences! Refer to the Consumer Support page for phone numbers and website information.The following products and more are available: Accessories Part...