Page 3 - Indicator light and function; Function; Buttons; Hardware
AG-168V SIP GATEWAY User Manual (V1.42) 3 Indicator light and function Indicator light Function Indicator light Function Power Power on ,indicating power Status Registered off, not registered flash Tel communicaing flash, Buttons Function voice indicating “local ip ” , refer to “GATEWAY Keypad set” ...
Page 4 - Standard and Protocol; Gateway supports following standard and protocol:; Operating requirements:
AG-168V SIP GATEWAY User Manual (V1.42) 4 Dynamic voice jitter buffer G.168/165 compliant 16ms echo cancellation Tone generation and Local DTMF re-generation according with ITU-T E.164 dial plan and customized dial rules 100 entries for quick dial Voice prompt Hotline Standard and Protocol Gateway s...
Page 5 - Network interface:1 RJ-45 Ethernet Connectors; Size; the other side to PBX or HUB or ADSL and Cable Modem’s lan port..
AG-168V SIP GATEWAY User Manual (V1.42) 5 Network interface:1 RJ-45 Ethernet Connectors FXS:1 RJ-11 For Tel Line:1 RJ-11 For PSTN Size 150 x 110 x 28 mm (L x W x H) Installation: 1 Connecting to network: connecting one side of the cable to the lan port of AG-168V, the other side to PBX or HUB or ADS...
Page 6 - Configuration; Two different ways can be used to configure AG-168V H323 phone:; Phone Keypad setup; Using the keyboard of the normal phone connecting to AG-168V FXS; Operation
AG-168V SIP GATEWAY User Manual (V1.42) 6 Configuration Two different ways can be used to configure AG-168V H323 phone: phone web browser, Telnet commands on computer. Phone Keypad setup Using the keyboard of the normal phone connecting to AG-168V FXS port and the “IP key” , which can preset and ent...
Page 7 - Configured by WEB; Double click
AG-168V SIP GATEWAY User Manual (V1.42) 7 x + IP input the ip address xxx.xxxx.xxx.xxx, press “ip ” button . Using the button of * for , Configured by WEB Double click icon to open the IE browser. Input the IP address of the GATEWAY into address bar ( ), and then input password of the GATEWAY into...
Page 8 - Default IP address of the AG-168V; pppoe
AG-168V SIP GATEWAY User Manual (V1.42) 8 Fig 3.1 Http Setting Network Setting Fig 3.2 Network Setting iptype : Set how IP GATEWAY gets relevant network parameters by selecting corresponding item from drop down list. static ip : Select this item to authorize users set IP address, subnet mask and rou...
Page 11 - when user service
AG-168V SIP GATEWAY User Manual (V1.42) 11 kaimen use kaimen’s system mediaring : use mediaring’s system italkbb : use italkbb’s system stanaphone : use stanaphone’s system net2phone : use net2phone’s system fwd : use fwd(freeworlddialup) system ipphonex : use ipphonex’s system sipphone : use siphon...
Page 12 - register port
AG-168V SIP GATEWAY User Manual (V1.42) 12 every “ nat ttl ” seconds to keep the port mapping on the NAT device alive. “ nat ttl ” is an integer between 10 and 65535 .default value is 20. phone number: set local ID . account: set aaa@bbb format account register . pin: set password . register port : ...
Page 13 - dtmf; control string; no check
AG-168V SIP GATEWAY User Manual (V1.42) 13 recommended way with SIP protocol used . dtmf : Set DTMF signal sending way by selecting control string , inband audio , signal keypad or rfc 2833 ,sip info from list box . dtmf payload: set use RTP send DTMF’s RTP the value range is 96-101 register ttl : I...
Page 14 - phone
AG-168V SIP GATEWAY User Manual (V1.42) 14 Fig 3.4 phone Setting use dialplan: Set whether use dial plan or use dial number by selecting the corresponding item in drop down list. disable: Do not use dial plan or dial number by selecting this item. enable: Use dial plan by selecting this item. dialnu...
Page 17 - Other settings; check hard type upgrade.
AG-168V SIP GATEWAY User Manual (V1.42) 17 g729 g7231 g711u g711a and gsm . codec3: Set the priority 3of the audio compression algorithm. The options are g729 g7231 g711u g711a and gsm . codec4: Set the priority 4of the audio compression algorithm. The options are g729 g7231 g711u g711a and gsm . co...
Page 18 - check phonenumber auto upgrade.; will pop up after clicking; Note; After entering set page, if; button is not clicked within 5 seconds, then; Update
AG-168V SIP GATEWAY User Manual (V1.42) 18 Phonenumber: check phonenumber auto upgrade. upgrade addr: Put IP address or domain name obtained by ISP of FTP server supplying upgrade program into this field. nts ip: Fill IP address of time server here. use daylight: Enable/disable daylight . timezone: ...
Page 19 - button to confirm the modification.; Name; Please refer to; Configured by PalmTool
AG-168V SIP GATEWAY User Manual (V1.42) 19 button to confirm the modification. phone Book: Click this button to open the speed dial settings page. Please refer to Fig 3.7. In this page, you can set and save the speed dial number by typing the name into the Name field and then entering the correspond...
Page 20 - Local IP; Telnet Configuration; Run; AG-168V Telnet Commands Explanation; AG-168V Telnet Commands; Comman
AG-168V SIP GATEWAY User Manual (V1.42) 20 connecting with the GATEWAY or at the same segment of the GATEWAY, double click icon to open the PalmTool. The index page of PalmTool will popup. a) Input the IP address of the GATEWAY into Local IP field (such as 192.168.1.100), and then click “GATEWAY Set...
Page 21 - get
AG-168V SIP GATEWAY User Manual (V1.42) 21 get Display basic parameters of the AG-168V IP GATEWAY set Set parameters of the AG-168V IP GATEWAY store Save current settings to designated position load Load designated settings to current position exit Exit from the setting mode without saving the confi...
Page 22 - Detailed description:; Display basic running parameters of the AG-168V IP GATEWAY.
AG-168V SIP GATEWAY User Manual (V1.42) 22 Syntax description: No optional parameter of keywords Usage: Display basic parameters of the AG-168V IP GATEWAY Relevant usage: None Detailed description: get Display basic running parameters of the AG-168V IP GATEWAY. Input ordinary password without debug ...
Page 23 - Command; set; Syntax description: set keywords value; IP GATEWAY
AG-168V SIP GATEWAY User Manual (V1.42) 23 password 1234 superpassword 19750407 debug 1[output] upgradeaddr [empty] sntpip 0.0.0.0 daylight 0[disable] timezone 55[(GMT+08:00)Beijing,Hong Kong,Urumqi] Input ordinary password with debug set as 0[disable], following information will be seen: AG-168V V1...
Page 24 - set pppid XXX; set ppppin XXX; iptype
AG-168V SIP GATEWAY User Manual (V1.42) 24 address of IP GATEWAY manually; 1: use DHCP mode. With this system, your LAN or router automatically assigns all the required network parameters to any device connected to it when the device log on. AG-168V IP GATEWAY is shipped from the factory with DHCP o...
Page 25 - set service X; provider. Parameter x ranged from 0 through 29:
AG-168V SIP GATEWAY User Manual (V1.42) 25 With iptype set as 0 , use this command to set subnet mask of AG-168V IP GATEWAY. set router XXX.XXX.XXX.XXX With iptype set as 0 , use this command to set router IP of network with AG-168V IP GATEWAY. set dns XXX.XXX.XXX.XXX With iptype set as 0 , use this...
Page 26 - NOTE; The free service list of Internet
AG-168V SIP GATEWAY User Manual (V1.42) 26 17: use Lucent system; 19: use IPN system; 20: use yayuang system; 21: use thinker system; 22: use suntek system; 28: use txtc system. set serviceaddr XXXX Set IP address or domain name of gatekeeper . set serviceid XXXXX Set service ID according to require...
Page 28 - account XXX
AG-168V SIP GATEWAY User Manual (V1.42) 28 set registerttl X Set register TTL. X is range from 10 through 65535 Sec. default value is 60 Sec. set rtptos X Set TOS segment of IP head package in RTP digital follow. set rtpport XXXX RTP port is the port transferring and receiving voice flow using UDP p...
Page 30 - the calls. X is ranged from 0 through 60.
AG-168V SIP GATEWAY User Manual (V1.42) 30 set iddprefix XX Set IDD service prefix number when set dialplan value set as 1 or 2 . For example, IDD service prefix number of china is 00; IDD service prefix number of USA is 1, etc. Parameter xxx must be an Arabic numeral and no longer than 3 characters...
Page 34 - store; store 1; load; load 1; exit; None; write
AG-168V SIP GATEWAY User Manual (V1.42) 34 set upgradeaddr XXX.XXX.XXX.XXX Set IP address or domain name of FTP server supplying upgraded program of AG-168V IP GATEWAY. set ntsip XXX.XXX.XXX.XXX Set IP address of time server. set daylight X Set use daylight or not. X ranged from 0 through 1: 0: do n...
Page 35 - result is not displayed in 5 seconds, ping command is fail.
AG-168V SIP GATEWAY User Manual (V1.42) 35 Syntax description: No keyword and parameter Usage: Save the configuration and restart the AG-168V IP GATEWAY. Command ping Syntax description : ping IP address Usage : ping IP address of other NAT device Relevant usage: In telnet window, input ping xx.xxx....
Page 36 - and the password is case sensitive.; The usage of AG-168V FXS; Receving calls; of the normal phone.; Call when Dual mode disabled; Dial with handset: pickup the handset, dial after dial tone; Call with ip address:; If registered in Gatekeeper
AG-168V SIP GATEWAY User Manual (V1.42) 36 Note All the Telnet commands of AG-168V IP GATEWAY should be written in low case and the password is case sensitive. The usage of AG-168V FXS Receving calls No matter what calls from IP or PSTN , the phone connecting to AG-168V FXS port will ring . Mention ...
Page 37 - and then press; Call when PSTN first Dual mode enabled; state from pstn first mode. Dial after the dial tone. Refer to “; Call when IP first Dual mode enabled; When ip first was setted , pick up the phone and dial as “; Emergency Call; PSTN LINE, work as the “LIFELINE” and call emergency number.
AG-168V SIP GATEWAY User Manual (V1.42) 37 and then press . Call when PSTN first Dual mode enabled Call PSTN number When PSTN first setted, the way of dial is the same as normal PSTN phone. Call voip number Press the cradle or the flash key of the normal phone, enable AG-168 to be in voip state from...
Page 38 - Upgrade AG-168V IP GATEWAY; Telnet command to updating; ftp X; Using HTTP
AG-168V SIP GATEWAY User Manual (V1.42) 38 Upgrade AG-168V IP GATEWAY Telnet command to updating Using telnet , connecting AG-168V FXS, input SuperPassword when registered. Input ftp X command to update, the value range is 0-2 . detailed meaning is : x-0 connecting to FTP server, getting the file to...
Page 40 - “Handfree” key to confirm it.
AG-168V SIP GATEWAY User Manual (V1.42) 40 parameter is "disable", "all", "mac", "pppid", "account", "phonenumber". When select as "disable" the terminal will NOT do the auto upgrade when select as "all" then the terminal will do the up...
Page 41 - HardwareTag; Reserves the right to make changes in technical and product; GATEWAY User Manual
AG-168V SIP GATEWAY User Manual (V1.42) 41 and there are no new features of use to them in our 1.35 and 1.36 versions, then they don’t need to put these files on FTP server. The customers will continue to use version 1.34. However if we have some useful features in 1.37, then by uploading the new fi...
