GarrettCom PS14P - Manuals - manualsarea.com

Page 2 - www GarrettCom com; Magnum; Trademarks; and; Converter; are trademarks and; Personal Hub; is a registered trademark of GarrettCom, Inc.

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) i www GarrettCom com . . Magnum ™ S14 & PS14P (PoE) Convenient Switches Installation and User Guide Part #: 84-00100 Rev. B (01/06) Trademarks GarrettCom, Magnum, Link-Loss-Learn, S-Ring, Convenient Switch and Converte...

Page 3 - ii; Federal Communications Commission; measures may be required to correct the interference.

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) ii www GarrettCom com . . Federal Communications Commission Radio Frequency Interference Statement This equipment generates, uses and can radiate frequency energy and if not installed and used properly, that is in strict a...

Page 4 - iii; Contacting GarrettCom, Inc

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) iii www GarrettCom com . . Contacting GarrettCom, Inc Please use the mailing address, phone and fax numbers and email address listed below: GarrettCom, Inc. 47823 Westinghouse Dr. Fremont, CA 94539 Phone (510) 438-9071 Fax...

Page 5 - iv; TABLE OF CONTENTS; Power Requirements, Power Supply Types for S14-Series Switches 48

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) iv www GarrettCom com . . TABLE OF CONTENTS Page 1.0 SPECIFICATIONS ............................................................................... 1 1.1 Technical Specifications ..............................................

Page 6 - Return Material Authorization (RMA) Procedure; Error! Bookmark not defined; Updated the PS14P(POE) Power Source Switch

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) v www GarrettCom com . . 3.7 S14H & S14P, DC-powered, Installation ......................................... 52 3.7.1 Power Requirement for PS14P(PoE) Power Source Switch .......... 54 3.8 Connecting Twisted Pair (RJ-4...

Page 7 - vi; Small edit and updates on power supply option.

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) vi www GarrettCom com . . 10/04: Small edit and updates on power supply option. 09/04: Small edit and updates on UL. 06/04: Small revision of the Agency Approvals Rev A 03/04: Initial release of this user manual for the S1...

Page 8 - Technical Specifications; Ports Performance; When a port is operating at 100Mbps:; Network Standards

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 1 www GarrettCom com . . 1.0 SPECIFICATIONS 1.1 Technical Specifications Ports Performance When a port is operating at 100Mbps: Data Rate: 100Mbps When a port is operating at 10 Mbps: Data Rate: 10 Mbps Network Standards 1...

Page 9 - Packet-Processing Between Domains; Filter / Forwarding Rate from 100Mbps ports: 148,800 pps max; Path Delay Value

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 2 www GarrettCom com . . Packet-Processing Between Domains Filter / Forwarding Rate from 100Mbps ports: 148,800 pps max Filtering and Forwarding Rate from 10 Mbps ports: 14,880 pps max. Processing type: Store and Forward, ...

Page 10 - Operating Environment

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 3 www GarrettCom com . . Operating Environment Ambient Temperature (S14): 32 º F to 104 º F (0 º C to 40 º C) (S14H): -13 º F to 140 º F (-25 º C to 60 º C) Long term per independent agency tests (UL) -40 º F to 167 º F (-...

Page 11 - Weight; Convection on regular model, plus the case is used as a heat sink on

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 4 www GarrettCom com . . Note: H and P models are designed for NEBS compliance, including, vibration, shock and altitude. Packaging: Enclosure: Robust sheet metal (Steel). Dimensions, Switch unit: Height x Width x Depth S1...

Page 12 - models that have IEC320; Hi”; models that have IEC320 power connector built-in the PS unit.

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 5 www GarrettCom com . . POWER SUPPLY (S14 Model only) These products are intended to be supplied by a Listed, Direct Plug-In power unit, marked “Class 2”, or a Listed ITE Power Supply, marked “LPS”, which has suitably rat...

Page 13 - Power Consumption; -15V DC can be used for dual source DC input

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 6 www GarrettCom com . . DC to unit : 12V DC, 2.5mm jack, center +ve, 6ft. cord Power Supply ( Direct DC ): built-in screw terminal block for +, -, ground. The 12V DC jack is also present. 12V DC internal (range of 8.0 to ...

Page 15 - ON for -48V power applied to the PS14P unit; Mounting option for S14 Family of Switches:

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 8 www GarrettCom com . . LED Indicators (Dual- front and end, port #4 has front only) POWER: Steady ON when power applied (S14 model) ON for -48V power applied to the PS14P unit PoE, ports 1,2,3,4: ON when delivering power...

Page 16 - Agency Approvals and Standard Compliance:

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 9 www GarrettCom com . . Agency Approvals and Standard Compliance: UL Listed (UL 60950), cUL, CE, Emissions meet FCC Part 15, Class A. NEBS L3 and ETSI compliant H & P models: IEEE P1613 Env. Std for Electric Power Sub...

Page 17 - Summary of models and descriptions:; Ext. AC Hardened power supply included .

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 10 www GarrettCom com . . 1.2 Summary of models and descriptions: S14-d,i = four 10/100 RJ-45 ports Switch, for office and wiring closet env., ext. AC Pwr Supply S14H-Hd, Hi = Hardened, four 10/100 RJ-45 ports Switch, Fact...

Page 18 - typical applications.

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 11 www GarrettCom com . . Magnum PS14P (PoE) Power Source Switch (model and descriptions) PS14P = ,Premium rated, four 10/100 RJ-45 ports Switch in a compact package, rated for un-controlled(outdoor) env. All four RJ-45 Et...

Page 19 - Inspecting the Package and the Product; This package should contain:

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 12 www GarrettCom com . . 2.1 Inspecting the Package and the Product Examine the shipping container for obvious damage prior to installing this product; notify the carrier immediately of any damage which you believe occurr...

Page 20 - Product Description

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 13 www GarrettCom com . . Remove the Magnum S14-Series Switch from the shipping container. Be sure to keep the shipping container should you need to ship the unit at a later date. In the event there are items missing or da...

Page 21 - side of the unit, as shown in Fig; GarrettCom S14; GarrettCom; Convenient Switch

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 14 www GarrettCom com . . Fig2.2a. Magnum S14, Front view (three RJ-45 ports on Front side of the unit, as shown in Fig Fig2.2b. Magnum S14, Rear view (one RJ-45 port on rear side) 8 – 15V DC GarrettCom S14 Left Side View ...

Page 22 - The orange-label Magnum S14H as shown above in Fig 2.2c is a

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 15 www GarrettCom com . . The Yellow label S14 shown above are for office and wiring closet environments and use an external AC power supply. A metal case with convection cooling is featured. Operation may be in 0° to 50°C...

Page 25 - Magnum PS14P : 4-port PoE Power Source Switch

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 18 www GarrettCom com . . 2.2.1: Magnum PS14P : 4-port PoE Power Source Switch GarrettCom’s continuous efforts of designing reliable and premium-rated Industrial Ethernet products with the latest technology while being a c...

Page 26 - transmit voice, data and power from the attached devices.; PoE is managed by a multi-stage

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 19 www GarrettCom com . . PS14P’s Ethernet ports can provide Power as well as 10/100 Mb data transmission over the inter-connecting Ethernet cables. So a single Ethernet twisted pair cable will be able to transmit voice, d...

Page 28 - - Wireless LAN access points and WLAN Mobility system

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 21 www GarrettCom com . . These are applications where the Magnum PS14P can be used to provide the power and data for these PoE Powered Devices, which require 12-13watts maximum. - Wireless LAN access points and WLAN Mobil...

Page 29 - meet all PoE requirements with a multi-choice of options.

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 22 www GarrettCom com . . Because of the approval of 802.3af PoE standard, the RJ-45 Ethernet jack will become the first worldwide standard power plug. The futuristic applications of PoE look promising as a convenient poin...

Page 30 - mounted in a rack mount tray.

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 23 www GarrettCom com . . Source Convenient Switch models come with two (2) sets of LED indicators. One set is mounted in the end adjacent to three of the RJ-4 ports for easy viewing when the unit is mounted in a rack moun...

Page 32 - Frame Buffering and Latency

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 25 www GarrettCom com . . and Activity (LK/ACT) LEDs indicating traffic that are mounted on the top of the unit as well as the end. LEDs mounted next to each port indicate (LK/ACT as LA1, LA2, LA3, LA4), 10/100 (ON for 100...

Page 34 - to stop incoming traffic.

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 27 www GarrettCom com . . buffering and processing resumes. This flow-control sequence occurs in a small fraction of a second and is transparent to an observer. See Section 4.6 for additional details. Another feature imple...

Page 35 - PS14P, Sleek 4-port 10/100 Power Source Switch for PoE devices

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 28 www GarrettCom com . . 2.5 Features and Benefits Small 4-port 10/100 Switch unit for edge-of-network applications Expansion of Ethernet connectivity is needed to connect edge devices into the LAN, the Magnum S14-Series ...

Page 36 - Two sets of LEDs for viewing status from any angle.

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 29 www GarrettCom com . . Installation is “Plug and Play”, operation is transparent to software The Magnum S14-Series & PS14P Switches operate as LAN switches only forwarding those packets from each domain that are nee...

Page 37 - AC and DC Power Supplies with extended temperature ratings; Dual-source power may increase availability, or be

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 30 www GarrettCom com . . AC and DC Power Supplies with extended temperature ratings S14-Series power input may be a variety of types, external AC and internal DC at 12V, 24V, or -48VDC. AC may be at extreme temperatures. ...

Page 38 - Efficient Compact design, for all-purpose convenient mounting

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 31 www GarrettCom com . . Efficient Compact design, for all-purpose convenient mounting Featuring a compact metal case, Magnum S14-Series & PS14P(POE) can be installed in minimal space in a rack-mount MC14-TRAY, on DIN...

Page 39 - into port #1 with twisted pair cabling to add 3 more ports.

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 32 www GarrettCom com . . of 10 Mbps and 100Mbps users. The switching full / half duplex capability on all four ports provide bandwidth for high performance. Port #1 (on the back end) is typically used for an up-stream con...

Page 40 - speed requirements. The users

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 33 www GarrettCom com . . speed requirements. The users operate at 100Mb as well as at 10 Mb, and utility devices (such as print servers) run at 10 and Workstations 100Mb Servers 100 1 2 3 4 5 6 7 8 Tx Rx UP LINK F H = X 2...

Page 41 - a very effective solution for this requirement.

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 34 www GarrettCom com . . Mbps. High performance users need a high bandwidth up-link for access to a central LAN and central file servers. Any attached node can change speed at any time without affecting network operation ...

Page 43 - power supplies, the cost-effective Magnum

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 36 www GarrettCom com . . Built with high-grade components, efficient thermal techniques of cooling, and equipped with a wide variety of options of AC and DC power supplies, the cost-effective Magnum S14Hs Convenient Switc...

Page 44 - In this; S14P Convenient Switches provided a secure dependable,

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 37 www GarrettCom com . . In this example, the extended temperature rated S14Ps take care of the LAN connectivity requirement in a harsh temperature environment Laptop computer Magnum 6K25 W W W . G a r r e t t C o m . C o...

Page 45 - This example is an Industrial application, where the

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 38 www GarrettCom com . . mounted above the ceiling in the building. The steel enclosure and wide selections of DC power inputs qualifies the Magnum S14Ps to provide a dependable, reliable and economical solution for any t...

Page 46 - Example 4b. Magnum PS14P (Power Source Switch) for PoE device only

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 39 www GarrettCom com . . Example 4b. Magnum PS14P (Power Source Switch) for PoE device only In another application for the Industrial floor, the requirement is to provide the complete floor with wireless to avoid more cab...

Page 49 - Secure attachment of mounting; Locating the Convenient Switch Unit

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 42 www GarrettCom com . . Secure attachment of mounting clips for Panel- 3.0 INSTALLATION This section describes the installation of the Magnum S14-Series & PS14P(PoE) Convenient Switches, including location, mountings...

Page 51 - common universal AC power supplies rated at 55 watts at 50

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 44 www GarrettCom com . . the front. Any mix of the Convenient Switches, Media Converters may be placed on a tray, up to a maximum of 16 units. (The mounting spaces of the MC14-TRAY are specific to the “S14”-series, and do...

Page 52 - (The MC mounting spaces of

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 45 www GarrettCom com . . and supporting up to 10 Switches for MC14-TR+PS9 and 16 units S14-Series for MC14- TR+PS9X2. The MC14-TR+PS9X2 Model has two groups of eight units per power supply. These models are equipped with ...

Page 54 - A Magnum

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 47 www GarrettCom com . . 3.4 DIN-Rail mounting option The Magnum PS14P, S14HR & S14PR Convenient Switches, designed for use in “Factory Floor” Industrial Ethernet environments, are also available for DIN-Rail mounting...

Page 55 - bracket; The Magnum S14 Models with “HR” have 24VDC power, and have the DIN-

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 48 www GarrettCom com . . bracket The Magnum S14 Models with “HR” have 24VDC power, and have the DIN- Rail-MC2 bracket included and assembled with the MC unit at the factory. 3.5 Power Requirements, Power Supply Types for ...

Page 56 - uncontrolled temperature environments.

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 49 www GarrettCom com . . The S14-Series are designed to provide reliable operation, withstand higher temperature environments, and provide the Direct DC power choices to the user to deploy in uncontrolled temperature envi...

Page 58 - “dual source” power input.; DC Power Terminals; : Terminal for “earth” or ground wire connection to the S14H chassis; Input Voltage

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 51 www GarrettCom com . . present and optionally can be used with an external P-rated AC power supply to provide “dual source” power input. DC Power Terminals : “+”, “-”, floating GND : Terminal for “earth” or ground wire ...

Page 60 - will connect to the post labeled “+ve” and the rest to the “-ve”.

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 53 www GarrettCom com . . The connection procedure is straightforward. Simply insert the DC leads to the S14H’s power terminals, positive (+) and negative (-) screws. The use of Ground (GND) is optional; it connects to the...

Page 61 - Power Requirement for Magnum PS14P(PoE) Power Source Switch

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 54 www GarrettCom com . . 3.7.1 Power Requirement for Magnum PS14P(PoE) Power Source Switch POWER INPUT: Total Power Consumption: 66 watts max. (1.4A @48VDC) Terminal block for -48v DC input (range of 46 to 60V dc), built ...

Page 62 - Media; 00BASE-TX RJ-45

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 55 www GarrettCom com . . 3.8 Connecting Twisted Pair (RJ-45 ports) The Magnum S14-Series & PS14P(POE) Convenient Switches can be connected to only one media type with two different speed i.e. 100BASE-TX and 10BASE-T. ...

Page 63 - shielded twisted pair cables.

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 56 www GarrettCom com . . 3.8.1 Connecting Twisted Pair (RJ-45, CAT 3 or CAT 5, Unshielded or Shielded) The following procedure describes how to connect a 10BASE-T or 100BASE-TX twisted pair segment to the RJ-45 port. The ...

Page 64 - Connections to NICs which support Auto-Negotiation, RJ-45 ports; steady ON and is OFF, if 10 Mbps traffic.

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 57 www GarrettCom com . . 3.8.2 Connections to NICs which support Auto-Negotiation, RJ-45 ports The copper ports of Magnum S14-Series Convenient Switches will function properly with NICs (Network Interface Cards) which sup...

Page 65 - both are described below.

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 58 www GarrettCom com . . 4.0 OPERATION 4.1 Dual-Speed Functionality, and Switching The Magnum S14-Series & PS14P(PoE) Convenient Switches provide four switched ports(three ports in the front and one on the rear). The ...

Page 66 - Switching, Filtering and Forwarding

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 59 www GarrettCom com . . Switching, Filtering and Forwarding Each time a packet arrives on one of the switched ports, the decision is taken to either filter or to forward the packet. Packets whose source and destination a...

Page 67 - Switching, Address Learning

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 60 www GarrettCom com . . Switching, Address Learning The Magnum S14-Series & PS14P(PoE) units have address table capacity of 2K node addresses, and are suitable for use in large networks. They are self-learning, so th...

Page 68 - When an RJ-45 cable connection is made, and each time LINK is enabled,

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 61 www GarrettCom com . . switches where the switch manager fixes the port settings via software, and the result of the auto-negotiation is changed in the managed switch by the manager commands. In such cases, the 10/100 s...

Page 69 - LED Description; Illuminates GREEN to indicate power applied.; Steady ON for 100Mb speed, OFF for 10Mb speed per port

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 62 www GarrettCom com . . 4.3: Dual LEDs, Front-panel and side-panel (Magnum S14-Series & PS14P(PoE)) LED Description PWR Illuminates GREEN to indicate power applied. LK/ ACT Steady ON for LINK w/no traffic, blinking f...

Page 71 - Before Calling for Assistance

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 64 www GarrettCom com . . 5.1 Before Calling for Assistance 1. If difficulty is encountered when installing or operating the unit, refer back to the Installation Section of the applicable chapter of this manual. Also check...

Page 72 - When Calling for Assistance; Please be prepared to provide the following information.

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 65 www GarrettCom com . . the Magnum S14-Series & PS14P(PoE) Switch and its associated cables are functioning properly. 5. If the problem continues after completing Step 4 above, contact your supplier of the Magnum S14...

Page 74 - Packing List Number (or Sales Order Number); Shipping and Packaging Information

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 67 www GarrettCom com . . Packing List Number (or Sales Order Number) Date of installation Failure symptoms, including a full description of the problem. GarrettCom will carefully test and evaluate all returned products, w...

Page 75 - outside of the shipping container.; Westinghouse

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 68 www GarrettCom com . . 1. Package the unit carefully. It is recommended that you use the original container if available. Units should be wrapped in a "bubble-wrap" plastic sheet or bag for shipping protection. ...

Page 76 - it to GarrettCom within two weeks of your purchase.

S14 & PS14P (PoE) Convenient Switches Installation and User Guide (01/06) 69 www GarrettCom com . . APPENDIX A: WARRANTY INFORMATION GarrettCom, Inc. warrants its products to be free from defects in materials and workmanship for a period of three (3) years from the date of shipment by GarrettCom...