GarrettCom Magnum 700X - Manuals

GarrettCom Magnum 700X – Manual in PDF format online.

Manuals:

Manual

Manual GarrettCom Magnum 700X

Summary

Page 2 - Magnum 700X Mini-Concentrators; GARRETT; Magnum; Trademarks

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT i Magnum     700X Mini-Concentrator Installation and User Guide Part #: 84-00017 (R5/98) Trademarks UL is a registered trademark of Underwriters Laboratories Ethernet is a trademark of Xerox Corporation Velcro is a tradem...

Page 3 - ii; Garrett Communications; Federal Communications Commission; measures may be required to correct the interference.

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT ii Contacting Garrett Communications Please use the mailing address and phone and fax numbers listed below: Garrett Communications 478 23 Westinghouse Driv e Fremont, CA 94539 Phone (510) 438-9071 Fax (510) 438-9072 WWW: http...

Page 4 - iii; PPENDIX; CHANGES MADE IN THIS REVISION

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT iii Table of Contents 1.0 SPECIFICATIONS ........................................................................................ 1 1.1 Technical Specifications ...................................................................

Page 5 - Magnum 700X Mini-Concentrators Installation and User Guide (05/98); MAGNUM; ETHERNET CONNECTIVITY PRODUCTS; Overview; 0Mb series and 100Mb series, both with optional port modules; May. ‘98

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT i MAGNUM     ETHERNET CONNECTIVITY PRODUCTS "DESIGNED AND MANUFACTURED IN THE USA" Overview Garrett Communications offers the Magnum line of Ethernet LAN physical layerconnectivity products with industry-standard ...

Page 7 - BNC; or by trained technicians.; Suitable for wiring closet shelf, wall or desktop mounting.

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 2 (1.1 Technical Specifications, continued)Connectors Seven Magnum PM ports on the front. BPMs are available with BNC, AUI, FST, and STP connectors. The following are available as RPM configurations. RJ-45: Shielded, 8-Pin Fe...

Page 9 - Ordering Information

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 4 1.4 Ordering Information Magnum 700X Mini-Concentrator Magnum 700X Base chassis with 7 slots for RPMs and BPMs, power supply Magnum 700X-Br Multi-Bridge chassis with one RJ-45 RPM for the common port, and 6 slots for BPMs a...

Page 10 - INTRODUCTION

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 5 2.0 INTRODUCTION This chapter describes the functionality of the Magnum 700X and its Port Modules. 2.1 Inspecting the Package and Product Examine the shipping container for obvious damage prior to installing this product; n...

Page 12 - cooled for silent operation.

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 7 The internal power supply is auto-ranging to handle any AC power type worldwide. Power input may range from 90 to 260 vac, with a frequency rating of 47 to 63 Hz. The unit is equipped with a rear mounted IEC-type recessed m...

Page 14 - Pin Function

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 9 to provide connectivity to any media type. The RPM-AUI card is equipped with Partition (PART) and Receive (RX) LEDs which function the same as the identical LEDs on the RPM-BNC (Section 2.3.1 above). The Magnum RPM-AUI card...

Page 15 - Partition LED

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 10 2.3.3 RPM-DTE The Magnum RPM-DTE is a module equipped with a 15-pin male DTE connector with lock posts. (The RPM-DTE is a mating connector for the RPM-AUI which has a 15-pin female connector and slide locks. The pin assign...

Page 16 - JUMPER ACROSS DISTANCES SUPPORTED; When fiber cable distances of more than 2 km are; Magnum RPM-FSC

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 11 JUMPER ACROSS DISTANCES SUPPORTED 1 - 2 0 - 2 km 3 - 4 0.5 - 3 km* 5 - 6 1.5 - 4 km* When fiber cable distances of 2 km or less are needed, thejumper should be placed across pins 1 and 2. * When fiber cable distances of mo...

Page 17 - Be sure to use single-mode fiber optic cable with this module.

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 12 Note: Be sure to use single-mode fiber optic cable with this module. Single-mode fiber has a smaller diameter than multi-mode fiber (2/15 - 8/60 microns for single-mode, 50/125 or 62.5/125 microns for multi-mode, where xx/...

Page 21 - module is designed with internal

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 16 2.4.4 BPM-TP The Magnum BPM-TP card is equipped with a single RJ-45 connector and supports Ethernet twisted pair segments of any standard length. The RJ-45 connector is shielded to minimize emissions and will allow both un...

Page 22 - network installation.

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 17 2.5 Features and Benefits ! ! ! ! Seven Ethernet Segments in a Single Unit The Magnum 700X allows any mix of standard Ethernet media to reside in one unit, up to seven different segments, to expand and reconfigure any Ethe...

Page 23 - Applications; AUI/DTE drop cable segment to an attached server.; Figure 2.6: Magnum 700X brings together mixed Ethernet media; corresponding Magnum PM is presented here:; IEEE Standard Reference

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 18 2.6 Applications The Magnum 700X provides connectivity between multiple and various Ethernet media types from a single chassis device, and includes support for the following IEEE 802.3 10 Mbps standards: 10BASE5, 10BASE2, ...

Page 24 - ST

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 19 3.0 INSTALLATION This chapter provides instructions for installing the Magnum 700X mixed-media concentrator and each of the available Port Modules (PMs). 3.1 Locating Magnum 700X Mini-Concentrators The location of the Magn...

Page 25 - directly to the AUI connector on the RPM-AUI or BPM-AUI port.

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 20 3.2.1 Connecting ThinNet 10BASE2 (BNC) Connect the ThinNet coax cable to the BNC connector on the Magnum RPM-BNC or BPM-BNC card in the same manner as is done for any standard BNC connection. The PM-BNC port is specially e...

Page 27 - and shielded twisted pair segments.; Removing the PM Face Plate; Removing Chassis Cover; Be sure the power cord is unplugged

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 22 3.2.7 Connecting Twisted Pair (RJ-45, Unshielded or Shielded) The following procedure describes how to connect a 10BASE-T twisted pair segment to the RJ-45 port on the RPM-TP or BPM-TP. The procedure is the same for both u...

Page 28 - Figure 3.3a: Removing Magnum 700X Chassis Cover; Power Supply

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 23 Figure 3.3a: Removing Magnum 700X Chassis Cover There are three screws located on the left and right side of the unit. Remove all screws. Once removed the chassis cover is easily lifted off the chassis base, and the interi...

Page 29 - Installing PM Cards

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 24 2. Remove PM Retaining Screws On the front of the unit there are two retaining screws for each PM card slot. These screws are used to secure the face plate in position. These screws are also used to secure individual PM mo...

Page 30 - Removing PM Cards; Magnum 700X Mini-Concentrator; PM Card

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 25 Slowly and firmly push the PM into position. Once inserted, secure the PM card using the two screws on the front panel of the unit. Once all PM cards needed have been installed (including face plates for empty slots), repl...

Page 31 - OPERATION; Each RPM port operates in conjunction with the controller; BPM Local Bridge Functionality

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 26 4.0 OPERATION This chapter describes the function and operation of the Magnum 700X mixed-media concentrator and its various Port Modules (PMs). 4.1 Repeater Functionality The Magnum 700X operates as an Ethernet mini-concen...

Page 34 - The BPMs are transparent to both the user and the; Powering the Magnum 700X Mini-Concentrator; Canada will not include a 115 vac power cord.)

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 29 Figure 3.12.2e: Local Isolation with Bridge Port Module 3. Bridge Transparency: The BPMs are transparent to both the user and the application software. 4. LINK and Traffic Status: The Magnum BPM-TP and BPM-FST indicate lin...

Page 36 - TROUBLESHOOTING

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 31 5.0 TROUBLESHOOTING All Magnum Ethernet products are designed to provide reliability and consistently high performance in all network environments. The installation of Magnum 700X Mini- Concentrators is a simple procedure ...

Page 37 - When Calling for Assistance

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 32 5.2 When Calling for Assistance Please be prepared to provide the following information. 1. A complete description of the problem, including the following points: a. The nature and duration of the problem; b. Situations wh...

Page 38 - Shipping and Packaging Information; CAUTION; may cause electro-static shock damage to the unit.; outside of the shipping container.

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 33 Garrett Communications will carefully test and evaluate all returned products, will repair products that are under warranty at no charge, and will return the warranty-repaired units to the sender with shipping charges prep...

Page 39 - Appendix A: Warranty Information; modification other than by Garrett Communications.

Magnum 700X Mini-Concentrators Installation and User Guide (05/98) GARRETT 34 Appendix A: Warranty Information Garrett Communications warrants its products to be free from defects in materials and workmanship for a period of three (3) years from the date of shipment by Garrett Communications. During...