Page 3 - Pilot’s Guide for the Bell 407GX
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX Copyright © 2011 Garmin Ltd. or its subsidiaries. All rights reserved. This manual reflects the operation of System Software version 1237.03 or later for the Bell 407GX Helicopter. Some differences in operation may be observed when...
Page 4 - ii; LIMITED WARRANTY
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B ii LIMITED WARRANTY LIMITED WARRANTY Within the warranty period, Garmin will, at its sole discretion, repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer f...
Page 5 - iii
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX iii WARNINGS, CAUTIONS, AND NOTES WARNING: Navigation and terrain separation must NOT be predicated upon the use of the terrain avoidance feature. The terrain avoidance feature is NOT intended to be used as a primary reference for ...
Page 6 - iv; Aeronautical; Information
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B iv WARNINGS, CAUTIONS, AND NOTES WARNING: The United States government operates the Global Positioning System and is solely responsible for its accuracy and maintenance. The GPS system is subject to changes which could affect the a...
Page 7 - NOTE
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX v WARNINGS, CAUTIONS, AND NOTES NOTE: All visual depictions contained within this document, including screen images of the panel and displays, are subject to change and may not reflect the most current system and databases. Depicti...
Page 8 - REVISION INFORMATION; All
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B vi REVISION INFORMATION Record of Revisions Part Number Revision Date Page Range Description 190-01255-00 A B February, 2011 September, 2011 All All Initial release Added 3D Audio and Voice RecognitionVarious clerical changes
Page 9 - vii; TABLE OF CONTENTS; SECTION 1 SYSTEM OVERVIEW
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX vii TABLE OF CONTENTS SECTION 1 SYSTEM OVERVIEW 1.1 System Description ................................................. 1 1.2 Line Replaceable Units (LRU) ................................. 2 1.3 G1000H Controls ......................
Page 10 - viii; SECTION 5 FLIGHT MANAGEMENT
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B viii TABLE OF CONTENTS Mono/Stereo Headsets .............................................. 123 Intercom .................................................................. 123 Clearance Recorder and Player (Optional) ..................
Page 11 - ix; SECTION 7 AUTOMATIC FLIGHT CONTROL SYSTEM
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX ix TABLE OF CONTENTS SECTION 7 AUTOMATIC FLIGHT CONTROL SYSTEM SECTION 8 ADDITIONAL FEATURES 8.1 Synthetic Vision System (SVS) ........................... 376 SVS Operation .............................................................
Page 13 - SYSTEM OVERVIEW; SYSTEM DESCRIPTION
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 1 SYSTEM OVERVIEW SECTION 1 SYSTEM OVERVIEW 1.1 SYSTEM DESCRIPTION This section provides an overview of the G1000H Integrated Flight Deck as installed in the Bell 407GX. The G1000H system is an integrated flight control system that...
Page 14 - with both GIA 63Hs using an RS-485 digital interface.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 2 SYSTEM OVERVIEW 1.2 LINE REPLACEABLE UNITS (LRU) • GDU 1040H (2) – One unit is configured as a PFD, the other as an MFD, each featuring a 10.4-inch LCD with 1024 x 768 resolution. The unit installed on the right/pilot side is des...
Page 15 - a digital format for use by the GEA 71H.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 3 SYSTEM OVERVIEW • GSC 46 (1) – The GSC 46 is a signal conditioner which converts tachometer and engine torque information to a digital format for use by the GEA 71H. • GRS 77H (1) – Provides aircraft attitude and heading informat...
Page 16 - 6 for the Iridium telephone feature is through the RS-232 bus.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 4 SYSTEM OVERVIEW • GDL 69AH (1) – A satellite radio receiver that provides real-time weather information to the G1000H MFD (and, indirectly, to the inset map of the PFD) as well as digital audio entertainment. The GDL 69AH communi...
Page 18 - PFD CONTROLS; Press to toggle Morse code identifier audio ON/OFF; NAV Knob; Press to toggle light blue tuning box between NAV1 and NAV2; Heading Knob; Turn to manually select a heading
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 6 SYSTEM OVERVIEW 1.3 G1000H CONTROLS NOTE: The Audio Panel (GMA 350) are described in the CNS & Audio Panel. The G1000H system controls are located on the PFD and MFD bezels and audio panel. The controls for the PFD and MFD ar...
Page 19 - Page Selection
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 7 SYSTEM OVERVIEW 5 Joystick Turn to change map range Press to activate Map Pointer for map panning 6 CRS/BARO Knob Turn large knob for altimeter barometric pressure setting Turn small knob to adjust course (only when HSI is in VOR...
Page 20 - The; Knob; Figure 1-3 Dual Concentric Knob; AUDIO PANEL CONTROLS; Figure 1-4 GMA 350H Audio Panel Controls; When a key is selected, an annunciator in the key is illuminated.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 8 SYSTEM OVERVIEW The NAV , CRS/BARO , COM , FMS , and ALT knobs are concentric dual knobs, each having small (inner) and large (outer) control portion. When a portion of the knob is not specified in the text, either may be used. L...
Page 22 - SECURE DIGITAL CARDS; Ins; all an SD card; Rem; ve an SD card; Figure 1-5 Display Bezel SD Card Slots
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 10 SYSTEM OVERVIEW 1.4 SECURE DIGITAL CARDS NOTE: Refer to the Appendices for instructions on updating the aviation database. NOTE: Ensure that the G1000H system is powered off before inserting the SD card. The PFD and MFD data car...
Page 23 - power application and emergency power supply operation.; ENT; Key; Figure 1-7 PFD Initialization
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 11 SYSTEM OVERVIEW 1.5 SYSTEM POWER-UP NOTE: Refer to the Appendices for AHRS initialization bank angle limitations. NOTE: See the Appendices for additional information regarding system-specific annunciations and alerts. NOTE: See ...
Page 24 - SYSTEM OPERATION; can be adjusted from the remaining display.; NORMAL DISPLAY OPERATION; Both displays offer control for COM and NAV frequency selection.; Figure 1-8 Normal Mode
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 12 SYSTEM OVERVIEW 1.6 SYSTEM OPERATION NOTE: In normal operating mode, backlighting can only be adjusted from the PFD. In reversionary mode, it can be adjusted from the remaining display. The displays are connected together via a ...
Page 25 - REVERSIONARY DISPLAY OPERATION; A for further information regarding system-specific alerts.; Figure 1-9 Reversionary Mode; red DU; BACKUP
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 13 SYSTEM OVERVIEW REVERSIONARY DISPLAY OPERATION NOTE: The G1000H System alerts the pilot when backup paths are utilized by the LRUs. Refer to Appendix A for further information regarding system-specific alerts. In the event of a ...
Page 26 - AHRS OPERATION; Refer to the Appendices for specific AHRS alert information.; Air Data; Figure 1-10 AHRS Operation; GPS INPUT FAILURE
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 14 SYSTEM OVERVIEW AHRS OPERATION NOTE: Refer to the Appendices for specific AHRS alert information. NOTE: Aggressive maneuvering while the AHRS is not operating normally can degrade AHRS accuracy. In addition to using internal sen...
Page 27 - G1000H SYSTEM ANNUNCIATIONS; Figure 1-11 G1000H System Failure Annunciations
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 15 SYSTEM OVERVIEW AIR DATA INPUT FAILURE A failure of the air data input has no effect on AHRS output while AHRS is operating in normal mode. A failure of the air data input while the AHRS is operating in reversionary No-GPS mode ...
Page 28 - SOFTKEY FUNCTION; Softkey Names; PFD SOFTKEYS; CDI; Level 1; TRFC-2: Traffic Map Page is displayed in the inset map window
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 16 SYSTEM OVERVIEW SOFTKEY FUNCTION The softkeys are located along the bottoms of the displays. The softkeys shown depend on the softkey level or page being displayed. The bezel keys below the softkeys can be used to select the app...
Page 30 - Figure 1-13 Top Level PFD Softkeys; Figure 1-14 INSET Softkeys
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 18 SYSTEM OVERVIEW Level 1 Level 2 Level 3 Description CDI Cycles through GPS, VOR1, and VOR2 navigation modes on the CDI DME Displays the DME Tuning Window, allowing selection of the DME XPDR Displays transponder mode selection so...
Page 31 - Figure 1-15 PFD Configuration Softkeys
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 19 SYSTEM OVERVIEW Figure 1-15 PFD Configuration Softkeys Press the BACK Softkey to return to the top-level softkeys ALT UNIT METERS IN HPA HSI FRMT 360 HSI ARC HSI (optional) SYN VIS SYN TERR HRZN HDG PATHWAY APTSIGNS MSG MSG MSG ...
Page 32 - Displays the EIS-Engine Page
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 20 SYSTEM OVERVIEW MFD SOFTKEYS Level 1 Level 2 Level 3 Description ENGINE Displays the EIS-Engine Page CAS ↑ Scroll up (Displayed only when a sufficient number of items are displayed in the Crew Alerting System Display to warrant ...
Page 33 - visible; SHW CHRT; Figure 1-17 MFD Softkeys; GPS RECEIVER OPERATION
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 21 SYSTEM OVERVIEW Level 1 Level 2 Level 3 Description DCLTR Selects desired amount of map detail; cycles through declutter levels: DCLTR (No Declutter): All map features visible DCLTR-1: Declutters land dataDCLTR-2: Declutters lan...
Page 34 - Or
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 22 SYSTEM OVERVIEW Viewing GPS receiver status information 1) Use the large FMS Knob on the MFD to select the Auxiliary Page Group (see Section 1.7 for information on navigating MFD page groups). 2) Use the small FMS Knob to select...
Page 35 - RAIM
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 23 SYSTEM OVERVIEW The GPS Status Page provides the following information: • Satellite constellation diagram Satellites currently in view are shown at their respective positions on a sky view diagram. The sky view is always in a no...
Page 36 - SBAS
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 24 SYSTEM OVERVIEW Because of the tighter protection limit on approaches, there may be times when RAIM is not available. The G1000H automatically monitors RAIM and warns with an alert message when it is not available. If RAIM is no...
Page 37 - • GPS Satellite Signal Strengths
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 25 SYSTEM OVERVIEW Disabling WAAS, EGNOS or MSAS 1) Select the GPS Status Page. 2) If necessary, select the SBAS Softkey. 3) Press the FMS Knob, and turn the large FMS Knob to hightlight the desired SBAS system. 4) Press the ENT Ke...
Page 38 - MENUS; MENU; Figure 1-19 Page Menu Examples
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 26 SYSTEM OVERVIEW 1.7 ACCESSING G1000H FUNCTIONALITY MENUS The G1000H has a MENU Key that, when pressed, displays a context-sensitive list of options. This options list allows the user to access additional features or make setting...
Page 39 - MFD PAGE GROUPS; Figure 1-20 Page Title and Page Groups; Selecting a page using the; Turn either; Knob one click to display the pop-up page selection window.; large; FMS; Turn; the; small; FMS; Knob until the desired page is selected.; FMS
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 27 SYSTEM OVERVIEW MFD PAGE GROUPS NOTE: Refer to the Flight Management, Hazard Avoidance, and Additional Features sections for details on specific pages. Information on the MFD is presented on pages which are grouped according to ...
Page 40 - Figure 1-21 Map Pages; service; Figure 1-22 Waypoint Pages; Airport; DP
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 28 SYSTEM OVERVIEW Figure 1-21 Map Pages Map Pages (MAP) Navigation MapTraffic MapWeather Data Link ( service optional ) HTAWS Figure 1-22 Waypoint Pages Airport Information Pages Waypoint Pages (WPT) Airport Information pages- Air...
Page 41 - Figure 1-23 Auxiliary Pages; Active Flight Plan
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 29 SYSTEM OVERVIEW Auxiliary Pages (AUX) Weights, Fuel, ExceedancesTrip PlanningUtilityGPS StatusSystem Setup- System Setup 1 ( SETUP 1 Softkey) - System Setup 2 ( SETUP 2 Softkey) XM Radio- XM Information ( INFO Softkey) - XM Radi...
Page 42 - Figure 1-25 Nearest Pages
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 30 SYSTEM OVERVIEW The Flight Plan Pages may also be accessed using the FPL Key. Main pages within this group are selected by turning the small FMS Knob. The Checklist Page may be accessed from the page group tab or the CHKLIST Sof...
Page 43 - MFD SYSTEM PAGES; SYSTEM SETUP PAGES; • Baro Transition Alert (see Flight Instruments; Figure 1-27 System Setup 1 Page
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 31 SYSTEM OVERVIEW MFD SYSTEM PAGES In the Auxiliary (AUX) Page Group, there are two system pages: System Setup and System Status. The System Setup Page allows management of various system parameters, while the System Status Page d...
Page 44 - Figure 1-28 System Setup 2 Page
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 32 SYSTEM OVERVIEW Figure 1-28 System Setup 2 Page D ate /t ime The Date/Time Box on the System Setup 1 Page displays the current date and time and allows the pilot to set the time format (local 12-hr, local 24-hr, or UTC) and offs...
Page 45 - Category; Altitude and Vertical; * Default setting
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 33 SYSTEM OVERVIEW D isPlay U nits Units in which various quantities are displayed on the G1000H screens are listed on the System Setup 1 Page. The Navigation Angle reference and the Position units are pilot selectable. Category Se...
Page 46 - • Class D
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 34 SYSTEM OVERVIEW BaRO t RansitiOn a leRt See the Flight Instruments section for a discussion on setting the Baro Transition Alert. a iRsPace a leRts The Airspace Alerts Box allows the pilot to turn the controlled/special-use airs...
Page 48 - The GPS CDI Box on the System Setup 1 Page displays the following:; cOm c; COM frequency channel spacing.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 36 SYSTEM OVERVIEW The following data may be selected for display in each of the four fields of the Navigation Status Box. • Bearing (BRG) • Distance (DIS) • Desired Track (DTK) • En Route Safe Altitude (ESA) • Estimated Time of Ar...
Page 52 - Figure 1-30 Example System Status Page; Display Database; LRU
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 40 SYSTEM OVERVIEW Enabling HTAWS voice callouts: 1) Turn the large FMS Knob to select the AUX Page group. 2) Turn the small FMS Knob to select System Setup. 3) If necessary, press the SETUP 2 Softkey to select the System Setup 2 P...
Page 53 - Figure 1-31 Utility Page
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 41 SYSTEM OVERVIEW UTILITY PAGE For flight planning purposes, timers, trip statistics, and a scheduler feature are provided on the AUX - Utility Page. The timers available include a stopwatch-like generic timer, a total time in fli...
Page 54 - aircraft lifts off the timer can also be reset to zero at any time.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 42 SYSTEM OVERVIEW 6) To stop the timer, press the ENT Key with ‘STOP?’ highlighted. The field changes to ‘RESET?’. 7) To reset the timer, press the ENT Key with ‘RESET?’ highlighted. The field changes back to ‘START?’ and the digi...
Page 55 - Resetting trip statistics readouts; Use the; Knob to highlight; the desired reset option and; pr; ess the; Key. The selected parameters are reset
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 43 SYSTEM OVERVIEW t RiP s tatistics The odometer and trip odometer record the total mileage traveled from the last reset; these odometers can be reset independently. Resetting the trip odometer also resets the average trip grounds...
Page 56 - DISPLAY BACKLIGHTING; AUTOMATIC ADJUSTMENT; be adjusted from the MFD.; Adjust display backlighting manually:; Figure 1-32 Manual Display Backlighting Adjustment
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 44 SYSTEM OVERVIEW 1.8 DISPLAY BACKLIGHTING The G1000H display and control backlighting can be adjusted either automatically or manually. AUTOMATIC ADJUSTMENT The existing instrument panel dimmer bus normally controls the PFD and M...
Page 57 - Adjust key backlighting manually:; Figure 1-33 Manual Key Lighting Adjustment
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 45 SYSTEM OVERVIEW Adjust key backlighting manually: 1) Press the MENU Key on the PFD to display the PFD Setup Menu Window. ‘AUTO’ becomes highlighted to the right of ‘PFD DSPL’. Figure 1-33 Manual Key Lighting Adjustment 2) Turn t...
Page 59 - FLIGHT INSTRUMENTS; SECTION 2 FLIGHT INSTRUMENTS
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 47 FLIGHT INSTRUMENTS SECTION 2 FLIGHT INSTRUMENTS WARNING: In the event that the airspeed, altitude, or heading indications become unusable, refer to the backup instruments. Increased situational awareness is provided by replacing...
Page 61 - Figure 2-2 Additional PFD Information
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 49 FLIGHT INSTRUMENTS 6 8 7 2 4 3 1 5 9 10 1 Traffic Annunciation 2 Radar Altimeter 3 Selected Heading 4 Wind Data 5 DME Information Window 6 Bearing Information Windows 7 Barometric Minimum Descent Altitude 8 Flight Plan Window 9 ...
Page 62 - FLIGHT INSTRUMENTS; AIRSPEED INDICATOR; Refer to the Rotorcraft Flight Manual (RFM) for speed criteria.; Figure 2-5 Red Pointer at V; displayed until reaching 20 knots.
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev B 50 FLIGHT INSTRUMENTS 2.1 FLIGHT INSTRUMENTS AIRSPEED INDICATOR NOTE: Refer to the Rotorcraft Flight Manual (RFM) for speed criteria. The Airspeed Indicator displays airspeed on a moving tape rolling number gauge. The groundspeed is...
Page 63 - ATTITUDE INDICATOR; Figure 2-6 Attitude Indicator; of the pointer on the roll scale.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 51 FLIGHT INSTRUMENTS ATTITUDE INDICATOR Attitude information is displayed over a virtual blue sky and brown ground with a white horizon line. The Attitude Indicator displays the pitch, roll, and slip/skid information. 1 Roll Point...
Page 64 - ALTIMETER; Figure 2-8 Altimeter
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev B 52 FLIGHT INSTRUMENTS ALTIMETER The Altimeter displays 600 feet of barometric altitude values at a time on a moving tape rolling number gauge. Numeric labels and major tick marks are shown at intervals of 100 feet. Minor tick marks ...
Page 65 - Figure 2-10 Standard Barometric Altimeter Setting
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 53 FLIGHT INSTRUMENTS The barometric pressure setting is displayed below the Altimeter in inches of mercury (in Hg) or hectopascals (hPa) when metric units are selected. Adjusting the altimeter barometric setting creates discontinu...
Page 66 - Figure 2-11 Baro Transition Alert
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev B 54 FLIGHT INSTRUMENTS A Baro Transition Alert is provided to alert the pilot to change the barometric pressure setting when crossing the transition altitude in either direction. This is displayed by the flashing light blue barometri...
Page 67 - VERTICAL DEVIATION; Figure 2-13 Glideslope Indicator
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 55 FLIGHT INSTRUMENTS VERTICAL DEVIATION NOTE: The Glidepath Indicator is only shown for aircraft with GIA 63W Integrated Avionics Units when SBAS is available. The Vertical Deviation Indicator (VDI) is a magenta chevron indicating...
Page 68 - Changing the HSI display format:; PFD; Select the; HSI FRMT; Select the; ARC HSI
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev B 56 FLIGHT INSTRUMENTS HORIZONTAL SITUATION INDICATOR (HSI) The Horizontal Situation Indicator (HSI) displays a rotating compass card in a heading-up orientation. Letters indicate the cardinal points and numeric labels occur every 30...
Page 70 - Figure 2-20 Navigation Angle Settings
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev B 58 FLIGHT INSTRUMENTS Navigation angles (track, heading, course, bearing) are set on the AUX - System Setup Page and are either corrected to the computed magnetic variation (‘Mag Var’), referenced to true north (denoted ‘T’), or cor...
Page 71 - Figure 2-21 Turn Rate Indicator and Trend Vector; BEARING POINTERS AND INFORMATION WINDOWS; Two; Softkey then a; BRG; or; DME; bearing pointers are light blue and are; Figure 2-22 HSI with Bearing and Distance Information
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 59 FLIGHT INSTRUMENTS TURN RATE INDICATOR The Turn Rate Indicator is located directly above the rotating compass card. Tick marks to the left and right of the lubber line denote half-standard and standard turn rates. A magenta Turn...
Page 72 - • GPS-derived great circle distance to; DME INFORMATION WINDOW
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev B 60 FLIGHT INSTRUMENTS When a bearing pointer is displayed, its associated information window is also displayed. The Bearing Information windows (Figure 2-22) are displayed to the lower sides of the HSI and display the following info...
Page 73 - Activating Heading Preset Mode:; SET HDG; To change the heading value, press the; HDG; Figure 2-23 Heading Preset Mode; Heading Preset Mode may be deactivated at any time by pushing the; HPM OFF; Softkey, or the mode will; Figure 2-24 Heading Alignment
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 61 FLIGHT INSTRUMENTS HEADING PRESET MODE Heading Preset Mode allows AHRS to compute heading data without using the magnetic sensing device. If a magnet anomaly occurs (either due to interference or magnetometer failure), and Headi...
Page 74 - navigation; Figure 2-26 Navigation Sources
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev B 62 FLIGHT INSTRUMENTS COURSE DEVIATION INDICATOR (CDI) NOTE : During a heading change of greater than 105˚ with respect to the course, the CDI on the Arc HSI switches to the opposite side of the deviation scale and displays reverse ...
Page 75 - Changing navigation sources:; when all of the following occur:
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 63 FLIGHT INSTRUMENTS Changing navigation sources: 1) Select the CDI Softkey to change from GPS to VOR1 or LOC1. This places the light blue tuning box over the NAV1 standby frequency in the upper left corner of the PFD. 2) Select t...
Page 76 - Figure 2-28 GPS CDI Settings
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev B 64 FLIGHT INSTRUMENTS GPS CDI SCALING When GPS is the selected navigation source, the flight plan legs are sequenced automatically and annunciations appear on the HSI for the flight phase. Flight phase annunciations are normally sho...
Page 77 - Figure 2-29 Automatic CDI Scaling; Glossary for leg type definitions)
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 65 FLIGHT INSTRUMENTS Figure 2-29 Automatic CDI Scaling 2.0 nm Enroute (Oceanic if >200 nm from nearest airport) 0.3 nm Missed Approach 1.0 nm Approach 1.0 nm Terminal 1.0 nm Terminal 0.3 nm Departure CDI Full-scale Deflection R...
Page 78 - Figure 2-30 Typical LNAV and LNAV+V Approach CDI Scaling; Figure 2-31 Typical LNAV/VNAV and LPV Approach CDI Scaling; • When a; Table 2-1 Automatic GPS CDI Scaling
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev B 66 FLIGHT INSTRUMENTS Figure 2-30 Typical LNAV and LNAV+V Approach CDI Scaling 1.0 nm 2 nm 350 ft angle set by system 0.3 nm FAF CDI Full-scale Deflection CDI scale is set to the smaller of 0.3 nm or an angle set by the system CDI s...
Page 79 - OBS
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 67 FLIGHT INSTRUMENTS OBS MODE NOTE: VNV is inhibited while automatic waypoint sequencing has been suspended. Enabling Omni-bearing Selector (OBS) Mode suspends the automatic sequencing of waypoints in a GPS flight plan (GPS must b...
Page 80 - Softkey label; SUSP; Softkey, deactivates; Figure 2-33 Suspending Automatic Waypoint Sequencing; Softkey
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev B 68 FLIGHT INSTRUMENTS As the aircraft crosses the missed approach point (MAP), automatic approach waypoint sequencing is suspended. ‘SUSP’ appears on the HSI at the lower right of the aircraft symbol. The OBS Softkey label changes t...
Page 81 - SUPPLEMENTAL FLIGHT DATA; Selecting the; DFLTS; TEMPERATURE DISPLAYS; normal display conditions and in reversionary display mode.; Figure 2-34 Outside Air Temperature; Normal Display
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 69 FLIGHT INSTRUMENTS 2.2 SUPPLEMENTAL FLIGHT DATA NOTE: Selecting the DFLTS Softkey turns off metric Altimeter display, the Inset Map, and wind data display. In addition to the flight instruments, the PFD also displays various sup...
Page 82 - WIND DATA; Figure 2-35 Wind Data; No Data
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev B 70 FLIGHT INSTRUMENTS WIND DATA Wind direction and speed (relative to the aircraft) in knots can be displayed in a window to the upper left of the HSI. When the window is selected for display, but wind information is invalid or unav...
Page 83 - Aircraft > 1 min before the next TOD due to flight plan change; Table 2-2 VNV Indication Removal Criteria
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 71 FLIGHT INSTRUMENTS VERTICAL NAVIGATION (VNV) INDICATIONS When a VNV flight plan has been activated, VNV indications (VNV Target Altitude, RSVI, VDI) appear on the PFD in conjunction with the “TOD within 1 minute” message and “Ve...
Page 84 - PFD ANNUNCIATIONS AND ALERTING FUNCTIONS; SYSTEM ALERTING; System. When a new message is issued, the; Softkey flashes to alert the flight crew. It continues to flash; Softkey to begin; Softkey is flashing.; Figure 2-37 Alerting System; MARKER BEACON ANNUNCIATIONS; Figure 2-38 Marker Beacon Annunciations
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev B 72 FLIGHT INSTRUMENTS 2.3 PFD ANNUNCIATIONS AND ALERTING FUNCTIONS The following annunciations and alerting functions are displayed on the PFD. Refer to the Engine Indication and Crew Alerting System (EICAS) Section for information ...
Page 85 - TRAFFIC ANNUNCIATION; Figure 2-39 Traffic Annunciation; Traffic; HTAWS ANNUNCIATIONS; Figure 2-41 Traffic and Example HTAWS Annunciations
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 73 FLIGHT INSTRUMENTS TRAFFIC ANNUNCIATION Traffic is displayed symbolically on the PFD Inset Map, the MFD Navigation Map Page, and various other MFD page maps. Refer to the Hazard Avoidance Section and the Appendix for more detail...
Page 86 - ALTITUDE ALERTING; The following occur when approaching the Selected Altitude:; Figure 2-42 Altitude Alerting Visual Annunciations; Deviation of ±200 feet; LOW ALTITUDE ANNUNCIATION; shown for unless HTAWS alerting is inhibited.; Figure 2-43 Low Altitude on GPS SBAS Approach; Altimeter
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev B 74 FLIGHT INSTRUMENTS ALTITUDE ALERTING The Altitude Alerting function provides visual and audio alerts when approaching the Selected Altitude. Whenever the Selected Altitude is changed, Altitude Alerting is reset. Altitude Alerting...
Page 87 - MINIMUM DESCENT ALTITUDE/DECISION HEIGHT ALERTING; altitude or; Figure 2-44 Barometric MDA/DH Alerting Visual Annunciations; Altitude Reached
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 75 FLIGHT INSTRUMENTS MINIMUM DESCENT ALTITUDE/DECISION HEIGHT ALERTING For altitude awareness, a Minimum Descent Altitude (MDA) or Decision Height (DH), based on barometric altitude or radar altitude, can be set. When active, the ...
Page 88 - RADAR ALTIMETER; Figure 2-46 Current Radar Height; Radar Altimeter; Radar Height Range; Table 2-3 Radar Altimeter Sensitivity
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev B 76 FLIGHT INSTRUMENTS RADAR ALTIMETER When the radar height (the aircraft altitude above ground level detected by the radar altimeter) is between zero and 2500 feet, the current value is displayed in green above the selected course ...
Page 89 - Figure 2-50 Radar Altimeter Invalid Data
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 77 FLIGHT INSTRUMENTS A ground line (Figure 2-49) is shown on the Altimeter to display the aircraft’s height relative to the ground. If the data becomes invalid, the message “RA FAIL” is displayed in yellow in place of the current ...
Page 90 - ABNORMAL OPERATIONS; ABNORMAL GPS CONDITIONS; Annunciation; LOI; Table 2-4 Abnormal GPS Conditions Annunciated on HSI; items on the PFD are then shown in yellow:
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev B 78 FLIGHT INSTRUMENTS 2.4 ABNORMAL OPERATIONS ABNORMAL GPS CONDITIONS The annunciations listed in Table 2-3 can appear on the HSI when abnormal GPS conditions occur. Refer to the Flight Management Section for more information on Dea...
Page 91 - UNUSUAL ATTITUDES; Figure 2-52 Pitch Attitude Warnings; Nose Low; experiences unusual attitudes:
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 79 FLIGHT INSTRUMENTS UNUSUAL ATTITUDES When the aircraft enters an unusual pitch attitude, red chevrons pointing toward the horizon warn of extreme pitch. The chevrons are displayed on the Attitude Indicator, starting at 50˚ above...
Page 93 - ENGINE INDICATION & CREW ALERTING SYSTEM; SECTION 3 ENGINE AND CREW ALERTING SYSTEMS; • The; Power Situation Indicator (PSI; display engine information on the Primary; Engine Indication System (EIS; ) strip displays engine, electrical and fuel information on the MFD.; Crew Alerting System; the crew of aberrant flight conditions.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 81 ENGINE INDICATION & CREW ALERTING SYSTEM SECTION 3 ENGINE AND CREW ALERTING SYSTEMS NOTE: Refer to the Rotorcraft Flight Manual (RFM) for limitations. The G1000H Integrated Flight Deck offers improved flight operations and r...
Page 94 - EIS
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 82 ENGINE INDICATION & CREW ALERTING SYSTEM In a display fails, the other display may be configured to present Primary Flight Display (PFD) symbology together with condensed EIS information (refer to the System Overview for mor...
Page 95 - the actual aircraft configuration.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 83 ENGINE INDICATION & CREW ALERTING SYSTEM 3.1 ENGINE INDICATION SYSTEM (EIS) STRIP NOTE: Depictions of equipment may differ from the installed equipment. Examples shown may differ from the actual aircraft configuration. EIS i...
Page 97 - ENGINE POWER AND SPEED INDICATIONS; and on the EIS - Engine Page of the MFD in a larger format.; POWER SITUATION INDICATOR
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 85 ENGINE INDICATION & CREW ALERTING SYSTEM 3.2 ENGINE POWER AND SPEED INDICATIONS NOTE : Refer to the Rotorcraft Flight Manual (RFM) for engine operating limitations and corrective actions. The Power Situation Indicator (PSI) ...
Page 98 - DUAL TACHOMETER; gauge scale will display power-off limitations.; ALTERNATE ENGINE DATA SOURCE ANNUNCIATIONS; Figure 3-6 Alternate Engine Data Source Annunciations; be removed from the gauges.
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 86 ENGINE INDICATION & CREW ALERTING SYSTEM TAKEOFF TIMER After the engine has been started, if Q or MGT are within the takeoff limitation ranges, the G1000H displays a 5-minute countdown timer inside the PSI gauge. The timer f...
Page 99 - • ENGINE
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 87 ENGINE INDICATION & CREW ALERTING SYSTEM 3.3 ENGINE PAGE NOTE : Refer to the Rotorcraft Flight Manual (RFM) for engine operating limitations and corrective actions. Pressing the ENGINE Softkey on the MFD accesses the EIS - E...
Page 100 - POWER ASSURANCE CHECK; power can be achieved.
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 88 ENGINE INDICATION & CREW ALERTING SYSTEM POWER ASSURANCE CHECK The G1000H can assist the pilot in performing a power assurance check to determine if installed specification power can be achieved. NOTE: Follow the procedures ...
Page 101 - PFD CAS; CAS; Scrolling Softkey
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 89 ENGINE INDICATION & CREW ALERTING SYSTEM 3.4 CREW ALERTING SYSTEM (CAS) NOTE: Aural alerts associated with abnormal conditions and advisories are managed through the audio panels. Refer to the Audio Panel and CNS Section for...
Page 102 - CAS MESSAGE PRIORITIZATION; for recommended pilot actions.; Warning; steady ‘CAUTION’ PBA light is illuminated above the PFD.; Advisory
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 90 ENGINE INDICATION & CREW ALERTING SYSTEM MFD Alerts window containing CAS messages CAS Scrolling Softkeys (Disabled Until More Than 19 Messages are Displayed) Figure 3-10 Engine Page CAS Display (MFD) CAS MESSAGE PRIORITIZAT...
Page 103 - Table 3-1 Warning CAS Messages
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 91 ENGINE INDICATION & CREW ALERTING SYSTEM NOTE: See the Rotorcraft Flight Manual (RFM) for recommended pilot actions. Annunciation Text Description Audio Alert BATTERY HOT Battery overheat detected. Single Chime ENGINE FIRE F...
Page 104 - Q MISCOMP; Table 3-2 Caution CAS Messages
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 92 ENGINE INDICATION & CREW ALERTING SYSTEM Annunciation Text Description Audio Alert Q MISCOMP Q miscompare event. Single Ping R/FUEL BOOST Right fuel boost pump has failed. R/FUEL XFR Right fuel transfer pump has failed. T/R ...
Page 105 - AUDIO PANEL AND CNS; SECTION 4 AUDIO PANEL AND CNS; • Audio Panel; Knob located on the Primary Flight Display
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 93 AUDIO PANEL AND CNS SECTION 4 AUDIO PANEL AND CNS 4.1 OVERVIEW The Communication/Navigation/Surveillance (CNS) system includes the Audio Panel, communication radios, navigation radios, and Mode S transponder. The System Overview...
Page 106 - MFD/PFD CONTROLS AND FREQUENCY DISPLAY
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 94 AUDIO PANEL AND CNS MFD/PFD CONTROLS AND FREQUENCY DISPLAY Figure 4-1 MFD/PFD Controls, NAV/COM Frequency Tuning Boxes, and DME Tuning Window 12 3 4 5 9 10 11 7 8 6 1 2
Page 107 - – Transfers the standby and active NAV frequencies.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 95 AUDIO PANEL AND CNS 1 NAV VOL/ID Knob – Controls NAV audio volume level. Press to turn the Morse code identifier audio on and off. Volume level is shown in the NAV frequency field as a percentage. 2 NAV Frequency Transfer Key – ...
Page 108 - Figure 4-2 GMA 350H Audio Panel Controls; – When selected, audio from the #1 NAV receiver can be heard.; AUX; – When selected, audio from the AUX inputs can be heard.; MUSIC; – Indicates volume/squelch setting relative to full scale.; Front Panel Jack
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 96 AUDIO PANEL AND CNS AUDIO PANEL CONTROLS Figure 4-2 GMA 350H Audio Panel Controls 21 14 15 17 12 13 11 19 20 18 16 10 8 6 4 2 3 5 7 9 1 NOTE: When a key is selected, a triangular annunciator above the key is illuminated. 1 MKR/M...
Page 109 - Key. Selection of a second MIC button initiates Split-COM mode; PILOT
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 97 AUDIO PANEL AND CNS 12 MIC1 – Selects the #1 transmitter for transmitting. COM1 receive is simultaneously selected when this key is pressed allowing received audio from the #1 COM receiver to be heard. COM2 or COM3 receive can b...
Page 110 - COM TRANSCEIVER SELECTION AND ACTIVATION; COM transceiver state prior to shutdown.; MIC; the other COM radio is muted.; Figure 4-3 Selecting a COM Radio for Transmit
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 98 AUDIO PANEL AND CNS 4.2 COM OPERATION COM TRANSCEIVER SELECTION AND ACTIVATION NOTE: When turning on the system for use, the system remembers the last frequencies used and the active COM transceiver state prior to shutdown. The ...
Page 111 - Key Annunciator; Figure 4-4 COM Radio Transmit and Receive Indications; COM TRANSCEIVER MANUAL TUNING; Manually tuning a COM frequency:; Frequency Transfer; Figure 4-5 COM Frequency Tuning
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 99 AUDIO PANEL AND CNS TRANSMIT/RECEIVE INDICATIONS During COM transmission, a white TX appears by the active COM frequency replacing the Frequency Transfer Arrow. On the Audio Panel, when PTT is pressed, the active transceiver MIC...
Page 112 - Press the small; upper and lower radio frequency fields.; Figure 4-6 Switching COM Tuning Boxes; COM; Knob to; Pressing and holding the COM; Key for two seconds automatically loads the emergency; Press for Two Seconds to
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 100 AUDIO PANEL AND CNS SELECTING THE RADIO TO BE TUNED Press the small COM Knob to transfer the frequency tuning box and Frequency Transfer Arrow between the upper and lower radio frequency fields. Figure 4-6 Switching COM Tuning ...
Page 113 - AUTO-TUNING THE COM FREQUENCY; COM frequencies can be automatically tuned from the following:; AUTO-TUNING FROM THE PFD; the PFD. When the desired frequency is entered, it becomes a; Frequency; Key places this frequency into the COM Active Frequency Field.; NRST; Softkey to Open
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 101 AUDIO PANEL AND CNS AUTO-TUNING THE COM FREQUENCY COM frequencies can be automatically tuned from the following: • Nearest Airports Window (PFD) • WPT – Airport Information Page • NRST – Nearest Airports Page • NRST – Nearest F...
Page 114 - page group by highlighting the frequency and pressing the; Figure 4-9 Frequency Auto-Tuning from the MFD; Figure 4-10 Nearest Pages Menus
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 102 AUDIO PANEL AND CNS AUTO-TUNING FROM THE MFD Frequencies can be automatically loaded into the COM Frequency Box from pages in the NRST or WPT page group by highlighting the frequency and pressing the ENT Key (Figures 4-9, 4-10,...
Page 115 - Figure 4-11 WPT – Airport Information Page
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 103 AUDIO PANEL AND CNS On the WPT - Airport Information Page, the cursor can be placed on the frequency field by pressing the FMS Knob and scrolling through the list. The frequency is transferred to the COM Standby Field with the ...
Page 117 - FREQUENCY SPACING; Figure 4-13 COM Channel Spacing; Spacing; Figure 4-14 AUX – System Setup Page; COM Frequency
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 105 AUDIO PANEL AND CNS FREQUENCY SPACING The COM radios can tune either 25-kHz spacing (118.000 to 136.975 MHz) or 8.33-kHz spacing (118.000 to 136.990 MHz) for 760-channel or 3040-channel configuration. When 8.33-kHz channel spac...
Page 118 - AUTOMATIC SQUELCH; Knob again enables Automatic COM Squelch.; SQ; COM VOLUME; COM radio volume level can be adjusted from 0 to 100% using the; Figure 4-16 COM Volume Level
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 106 AUDIO PANEL AND CNS AUTOMATIC SQUELCH Automatic COM Squelch quiets unwanted static noise when no audio signal is received, while still providing good sensitivity to weak COM signals. To disable Automatic COM Squelch, press the ...
Page 119 - NAV RADIO SELECTION AND ACTIVATION; Figure 4-17 Selecting a NAV Radio for Navigation
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 107 AUDIO PANEL AND CNS 4.3 NAV OPERATION NAV RADIO SELECTION AND ACTIVATION The NAV Frequency Box is composed of four fields; two standby fields and two active fields. The active frequencies are on the right side and the standby f...
Page 120 - Figure 4-18 Selecting a NAV Radio Receiver; NAV RECEIVER MANUAL TUNING; Manually tuning a NAV frequency:; Figure 4-19 NAV Frequency Tuning; NAV
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 108 AUDIO PANEL AND CNS NAV radios are selected for listening by pressing the corresponding keys on the Audio Panel. Pressing the NAV1 ,or NAV2 Key selects and deselects the navigation radio source. Selected audio can be heard over...
Page 121 - Figure 4-20 Switching NAV Tuning Boxes; Figure 4-21 NAV Radio ID Indication; NAV VOLUME; Radio volume level can be adjusted from 0 to 100% using the; Figure 4-22 NAV Volume Levels
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 109 AUDIO PANEL AND CNS SELECTING THE RADIO TO BE TUNED Press the small NAV Knob to transfer the frequency tuning box and Frequency Transfer Arrow between the upper and lower radio frequency fields. Figure 4-20 Switching NAV Tuning...
Page 122 - AUTO-TUNING A NAV FREQUENCY FROM THE MFD; • WPT – Airport Information; Figure 4-23 NAV Frequency Auto-Tuning from the MFD
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 110 AUDIO PANEL AND CNS AUTO-TUNING A NAV FREQUENCY FROM THE MFD NAV frequencies can be selected and loaded from the following MFD pages: • WPT – Airport Information • WPT – VOR Information • NRST – Nearest Airports • NRST – Neares...
Page 123 - Figure 4-24 Nearest Pages Menus; Nearest Airspaces Menu
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 111 AUDIO PANEL AND CNS Or : 1) When on the Nearest VOR, Nearest Airspaces, and Nearest Airports pages, press the MENU Key to display the page menu. 2) Turn the large FMS Knob to scroll through the menu options. 3) Press the ENT Ke...
Page 124 - In the example shown, the VOR list is selected with the; VOR; Softkey or from the page menu. The; Softkey and; FREQ
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 112 AUDIO PANEL AND CNS In the example shown, the VOR list is selected with the VOR Softkey or from the page menu. The FMS Knob or ENT Key is used to scroll through the list. The cursor is placed on the frequency with the FREQ Soft...
Page 125 - a similar manner using the appropriate softkeys or; NRST – Nearest Airports Pages
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 113 AUDIO PANEL AND CNS While enroute, NAV frequencies can also be auto-tuned from the NRST – Nearest Airports, WPT – Airport Information, WPT – VOR Information, and NRST – Nearest Frequencies Pages on the MFD in a similar manner u...
Page 126 - to a NAV frequency field as follows:
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 114 AUDIO PANEL AND CNS AUTO-TUNING NAV FREQUENCIES ON APPROACH ACTIVATION NOTE: The primary NAV frequency is auto-tuned upon loading a VOR or ILS/Localizer approach. NOTE: When an ILS/LOC approach has been activated while navigati...
Page 127 - annunciations located to the left of the Altimeter on the PFD.; Figure 4-27 Marker Beacon Annunciations on the PFD; Pressing the; Turning Marker Beacon Audio On; With the MKR/MUTE annunciator off, press the; Muting Marker Beacon Audio; During marker beacon audio reception, press the; Deselecting Marker Beacon Audio; To deselect marker beacon audio, press the
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 115 AUDIO PANEL AND CNS MARKER BEACON RECEIVER (OPTIONAL) NOTE: The marker beacon indicators operate independently of marker beacon audio and cannot be turned off. The marker beacon receiver is used as part of the ILS. The marker b...
Page 128 - and the NAV1; Figure 4-29 DME Tuning Window; The following; Selecting DME transceiver pairing:; CLR; Key or; Knob activates/deactivates the cursor in
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 116 AUDIO PANEL AND CNS DME TUNING (OPTIONAL) NOTE: When another auxiliary window is turned on, the DME Tuning Window is replaced on the PFD. NOTE: When turning on the system for use, the system remembers the last frequency used fo...
Page 129 - GTX 33 MODE S TRANSPONDER; TRANSPONDER CONTROLS
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 117 AUDIO PANEL AND CNS 4.4 GTX 33 MODE S TRANSPONDER The GTX 33 Mode S Transponder provides Mode A, Mode C, and Mode S interrogation and reply capabilities. Selective addressing or Mode Select (Mode S) capability includes the foll...
Page 130 - TRANSPONDER MODE SELECTION; STBY; Softkeys can be accessed by pressing the; XPDR; Softkey to display the Transponder Mode Selection Softkeys.; GROUND MODE; by pressing the; GND; Figure 4-31 Ground Mode
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 118 AUDIO PANEL AND CNS Figure 4-30 Transponder Softkeys (PFD) Pressing the BACK Softkey returns to the top-level softkeys. ALERTS ALERTS BACK BKSP IDENT 7 6 5 4 3 2 1 0 STBY ON ALT VFR CODE IDENT BACK XPDR IDENT Pressing the BACK ...
Page 131 - In Standby Mode, the IDENT function is inoperative.; Softkey. In Standby, the transponder does; Code Number and; Figure 4-32 Standby Mode; MANUAL ON MODE; ON Mode can be selected at any time by pressing the; ON; Softkey. ON Mode generates Mode A and Mode S; ON Mode
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 119 AUDIO PANEL AND CNS STANDBY MODE (MANUAL) NOTE: In Standby Mode, the IDENT function is inoperative. Standby Mode can be selected at any time by pressing the STBY Softkey. In Standby, the transponder does not reply to interrogat...
Page 132 - selected manually by pressing the; ALT; altitude information.; ALT Mode; Figure 4-34 Altitude Mode; REPLY STATUS; reply status field of the Transponder Data Box.; Reply to; Figure 4-35 Reply Indication
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 120 AUDIO PANEL AND CNS ALTITUDE MODE (AUTOMATIC OR MANUAL) Altitude Mode is automatically selected when the aircraft becomes airborne. Altitude Mode may also be selected manually by pressing the ALT Softkey. If Altitude Mode is se...
Page 133 - ENTERING A TRANSPONDER CODE; Figure 4-36 Entering a Code; Key or small; Figure 4-37 Entering a Code with the FMS Knob
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 121 AUDIO PANEL AND CNS ENTERING A TRANSPONDER CODE Entering a transponder code with softkeys: 1) Press the XPDR Softkey to display the Transponder Mode Selection Softkeys. 2) Press the CODE Softkey to display the Transponder Code ...
Page 134 - Figure 4-38 VFR Code; IDENT FUNCTION; In Standby Mode, the; Softkey is inoperative.; IDENT
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 122 AUDIO PANEL AND CNS VFR CODE The VFR code can be entered either manually or by pressing the XPDR Softkey, then the VFR Softkey. When the VFR Softkey is pressed, the pre-programmed VFR code is automatically displayed in the code...
Page 135 - ADDITIONAL AUDIO PANEL FUNCTIONS; INTERCOM; Figure 4-40 Intercom Controls; Keys to distribute as required. If the annunciators are lit, those; COPILOT CONFIGURED AS CREW OR PASSENGER; When the copilot position is configured as a passenger, the; COPLT; Key is disabled and the copilot
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 123 AUDIO PANEL AND CNS 4.5 ADDITIONAL AUDIO PANEL FUNCTIONS POWER-UP The Audio Panel performs a self-test during power-up. During the self-test all Audio Panel annunciator lights illuminate for approximately two seconds. Once the ...
Page 136 - In the following modes the copilot position is configured as crew.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 124 AUDIO PANEL AND CNS INTERCOM MODES NOTE: In the following modes the copilot position is configured as crew. NOTE: In the default ICS configuration, only the pilot and copilot positions can hear aircraft alerts. NOTE: When in Sp...
Page 137 - Passengers hear each other.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 125 AUDIO PANEL AND CNS P assengeR /c Rew i sOlate m ODe In ‘Passenger/Crew Isolate’ mode the Pilot and Copilot hear the aircraft audio and each other. The Passengers hear each other. ICS Keys Mode Operation Aircraft Audio COPLT PI...
Page 138 - hear each other. The Copilot has the option to use Split-COM mode.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 126 AUDIO PANEL AND CNS P ilOt & c OPilOt i sOlate m ODe In ‘Pilot & Copilot Isolate’ mode the Pilot, Copilot, and Passengers hear the aircraft audio. The Passengers hear each other. The Copilot has the option to use Split-...
Page 139 - Key. Pressing the small
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 127 AUDIO PANEL AND CNS INTERCOM VOLUME AND SQUELCH The VOL/CRSR Knob controls selection and volume or manual intercom squelch adjustment for audio sources that may not be adjustable anywhere else in the system. The small knob cont...
Page 140 - volume level that must be exceeded to be heard over the intercom).; mUsic v; , or MUSIC, the Volume Control Knob adjusts the individual; SPEAKER; Figure 4-43 Speaker Key
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 128 AUDIO PANEL AND CNS Selecting any button other than PILOT , COPLT , PASS , MUSIC or will cancel Blue-Select Mode. Pressing the small knob will also cancel Blue-Select Mode. After approximately ten seconds with no input, the Blu...
Page 141 - recorded memory block.; Figure 4-44 Marker Mute Key; Key Stops Play
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 129 AUDIO PANEL AND CNS CLEARANCE RECORDER AND PLAYER (OPTIONAL) The Audio Panel contains a digital clearance recorder that records up to 2.5 minutes of the selected COM radio signal. Recorded COM audio is stored in separate memory...
Page 142 - SPLIT COM; During; Annunciator flashes when the copilot’s microphone PTT is pressed.; COM2 Radio is Used; Figure 4-45 Split COM Operation; COM1 Radio is Used
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 130 AUDIO PANEL AND CNS SPLIT COM NOTE: Split COM performance is affected by the distance between the COM antennas and the separation of the tuned frequencies. If the selected COM frequencies are too close together, interference ma...
Page 143 - D AUDIO; sources however, there is no benefit from location separation.; Press and hold the
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 131 AUDIO PANEL AND CNS 3D AUDIO 3D Audio is useful when multiple audio sources are present. By using different responses in each ear, 3D audio processing creates the illusion that each audio source is coming from a unique location...
Page 144 - D Audio Troubleshooting
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 132 AUDIO PANEL AND CNS Symptom(s) Cause(s) Solution(s) “3D audio left” message heard in both ears.“3D audio right” message not heard 1) Mono headset in use 1) Use a stereo headset 2) Stereo headset in use with mono/stereo switch s...
Page 145 - VOICE RECOGNITION; response if applicable:
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 133 AUDIO PANEL AND CNS VOICE RECOGNITION Voice Recognition allows the pilot (and optionally copilot) to control the GMA 350H using spoken commands. To activate Voice Recognition, push and hold the Push-To-Command (PTC) button whil...
Page 148 - ENTERTAINMENT INPUTS; of the audio panel or to the Front Panel Jack.; Key controls the XM Radio XM Radio audio input.; TELEPHONE/ENTERTAINMENT INPUT; distribution configured.; XM RADIO AUDIO INPUT; Features section for more details on the Data Link Receiver.; INPUT MUTING
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 136 AUDIO PANEL AND CNS Control Spoken Command Action Confirmation of Action Cursor “Cursor off” or “Cursor cancel” or “Cancel cursor” Cancels cursor when cursor is flashing Cursor is removed 3D Audio “Three-D audio” Enables 3D aud...
Page 149 - AUDIO PANEL PREFLIGHT PROCEDURE; When the; MAN SQ; Figure 4-46 Audio Panel Controls; Setting the Audio Panel during preflight:; Verify that the PILOT , COPLT and PASS annunciators are lit.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 137 AUDIO PANEL AND CNS 4.6 AUDIO PANEL PREFLIGHT PROCEDURE NOTE: If the pilot and/or copilot are using headsets that have a high/low switch or volume control knob, verify that the switch is in the high position and the volume cont...
Page 150 - ABNORMAL OPERATION; associated equipment, including switches and external devices.; STUCK MICROPHONE; Figure 4-47 Stuck Microphone Alert; COM TUNING FAILURE; Figure 4-48 COM Tuning Failure; Emergency Channel; AUDIO PANEL FAIL-SAFE OPERATION
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 138 AUDIO PANEL AND CNS 4.7 ABNORMAL OPERATION Abnormal operation of the system includes equipment failures of the system components and failure of associated equipment, including switches and external devices. STUCK MICROPHONE If ...
Page 151 - FLIGHT MANAGEMENT; of the Pilot’s Guide explains flight management using the G1000H.; Softkey. Selecting the; INSET; Softkey again, then selecting the; OFF; Softkey removes the Inset Map.; DCLTR
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 139 FLIGHT MANAGEMENT SECTION 5 FLIGHT MANAGEMENT 5.1 INTRODUCTION The G1000H is an integrated flight, engine, communication, navigation and surveillance system. This section of the Pilot’s Guide explains flight management using th...
Page 152 - Figure 5-1 GPS Navigation Information on the PFD; NAVIGATION STATUS BOX; PFD Navigation Status Box
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 140 FLIGHT MANAGEMENT Figure 5-1 GPS Navigation Information on the PFD Location of: - Inset Map - Direct To Window - Flight Plan Window - Procedures Window - Nearest Airports Window Navigation Status Box Navigation Mode Figure 5-2 ...
Page 153 - right to 021 ̊ in 8 seconds’); The symbols used in the PFD status bar are:; MFD Navigation Status Box
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 141 FLIGHT MANAGEMENT • Active flight plan leg (e.g., ‘D-> KICT’ or ‘KIXD -> KCOS’) or flight plan annunciations (e.g., ‘Turn right to 021˚ in 8 seconds’) • Distance (DIS) and Bearing (BRG) to the next waypoint or flight plan...
Page 154 - USING MAP DISPLAYS; can display the following information:; MAP ORIENTATION; Figure 5-3 Map Orientation
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 142 FLIGHT MANAGEMENT 5.2 USING MAP DISPLAYS Map displays are used extensively in the system to provide situational awareness in flight. Most system maps can display the following information: • Airports, NAVAIDs, airspaces, airway...
Page 155 - show the map orientation nor the wind direction and speed.; Figure 5-4 Navigation Map Page Menu Window; Map Setup; Figure 5-5 Map Setup Menu Window - Map Group; Orientation Field
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 143 FLIGHT MANAGEMENT NOTE: When panning or reviewing active flight plan legs in a non-North Up orientation, the map does not show the map orientation nor the wind direction and speed. NOTE: Map orientation can only be changed on t...
Page 156 - MAP RANGE; Joystick; Figure 5-6 Map Range; AUTO ZOOM
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 144 FLIGHT MANAGEMENT MAP RANGE There are 28 different map ranges available, from 500 feet to 2000 nm. The current range is indicated in the lower right corner of the map and represents the top-to-bottom distance covered by the map...
Page 157 - Manual Range Override
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 145 FLIGHT MANAGEMENT • The ‘time out’ time (configurable on the Map Setup Page for the Map Group) determines how long auto zoom is overridden by a manual adjustment of the range knob. At the expiration of this time, the auto zoom ...
Page 158 - MAP PANNING; Map panning allows the pilot to:; , the Map Pointer flashes on the map display.; Figure 5-8 Navigation Map - Map Pointer Activated; Map Pointer
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 146 FLIGHT MANAGEMENT MAP PANNING Map panning allows the pilot to: • View parts of the map outside the displayed range without adjusting the map range • Highlight and select locations on the map • Review information for a selected ...
Page 159 - Figure 5-9 Navigation Map - Map Pointer on Point of Interest; Map Pointer on
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 147 FLIGHT MANAGEMENT When the Map Pointer is placed on an object, the name of the object is highlighted (even if the name was not originally displayed on the map). When any map feature or object is selected on the map display, per...
Page 160 - Figure 5-10 Navigation Map - Map Pointer on Airspace; to display the Map Pointer.; to move the Map Pointer around the map.
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 148 FLIGHT MANAGEMENT When the Map Pointer crosses an airspace boundary, the boundary is highlighted and airspace information is shown at the top of the display. The information includes the name and class of airspace, the ceiling ...
Page 161 - Place the Map Pointer on a waypoint.; NAVAID
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 149 FLIGHT MANAGEMENT Reviewing information for an airport, NAVAID, or user waypoint: 1) Place the Map Pointer on a waypoint. 2) Press the ENT Key to display the Waypoint Information Page for the selected waypoint. 3) Press the GO ...
Page 162 - Airspace
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 150 FLIGHT MANAGEMENT Viewing airspace information for a special-use or controlled airspace: 1) Place the Map Pointer on an open area within the boundaries of an airspace. 2) Press the ENT Key to display an options menu. 3) ‘Review...
Page 163 - MEASURING BEARING AND DISTANCE; Figure 5-13 Navigation Map - Measuring Bearing and Distance; Measurement
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 151 FLIGHT MANAGEMENT MEASURING BEARING AND DISTANCE Distance and bearing from the aircraft’s present position to any point on the viewable navigation map may be calculated using the ‘Measure Bearing and Distance’ selection from Na...
Page 164 - TOPOGRAPHY; TOPO Off; TOPO On; TOPO
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 152 FLIGHT MANAGEMENT TOPOGRAPHY All navigation maps can display various shades of topography colors representing land elevation, similar to aviation sectional charts. Topographic data can be displayed or removed as described in th...
Page 165 - Figure 5-15 Navigation Map Setup Menu - TOPO DATA Setup; TOPO DATA
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 153 FLIGHT MANAGEMENT Figure 5-15 Navigation Map Setup Menu - TOPO DATA Setup TOPO DATA On/Off TOPO DATA Range The topographic data range is the maximum map range on which topographic data is displayed. NOTE: Since the PFD Inset Ma...
Page 166 - Figure 5-17 Navigation Map Setup Menu - TOPO SCALE Setup
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 154 FLIGHT MANAGEMENT Figure 5-16 Navigation Map - TOPO SCALE Maximum Displayed ElevationMinimum Displayed Elevation Aircraft Altitude (MSL) Ground Elevation at Map Pointer Location (only visible when Map Pointer is displayed) Rang...
Page 167 - MAP SYMBOLS; Softkey is also discussed.; LAND SYMBOLS; The following items are configured on the land menu:; Off; Table 5-1 Land Symbol Information
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 155 FLIGHT MANAGEMENT MAP SYMBOLS This section discusses the types of land and aviation symbols that can be displayed. Each listed type of symbol can be turned on or off, and the maximum range to display each symbol can be set. The...
Page 168 - The following items are configured on the aviation menu:; Active Flight Plan Waypoint (ACTIVE FPL WPT); Table 5-2 Aviation Symbol Information
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 156 FLIGHT MANAGEMENT AVIATION SYMBOLS The following items are configured on the aviation menu: Aviation Symbols (Text label size can be None, Small, Medium (Med), or Large (Lrg)) Symbol Default Range (nm) Maximum Range (nm) Active...
Page 169 - Figure 5-18 Navigation Map Setup Menu - LAND DATA Setup; LAND DATA
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 157 FLIGHT MANAGEMENT SYMBOL SETUP All pages with maps can display land symbols (roads, lakes, borders, etc). Land symbols can be removed totally (turned off). Displaying/removing all land symbols: 1) Press the MENU Key with the Na...
Page 170 - Knob to return to the Navigation Map Page.; Figure 5-19 Navigation Map Setup Menu - LAND GROUP Setup; Figure 5-20 Navigation Map Setup Menu - AVIATION GROUP Setup; Maximum Display Range
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 158 FLIGHT MANAGEMENT 10) Press the FMS Knob to return to the Navigation Map Page. Figure 5-19 Navigation Map Setup Menu - LAND GROUP Setup Maximum Display Range Text Label Size (None, Small, Med, or Lrg) Figure 5-20 Navigation Map...
Page 171 - The declutter level is displayed in the; Softkey and next to the Declutter Menu Option.; Figure 5-21 Navigation Map - Declutter Level Indications; Declutter Level; Navigation Map Page Menu
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 159 FLIGHT MANAGEMENT MAP DECLUTTER The declutter feature allows the pilot to progressively step through four levels of removing map information. The declutter level is displayed in the DCLTR Softkey and next to the Declutter Menu ...
Page 172 - various levels of declutter.; Table 5-3 Navigation Map Items Displayed by Declutter Level
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 160 FLIGHT MANAGEMENT Table 5-3 lists the items displayed at each declutter level. The ‘X’ represents map items displayed for the various levels of declutter. Item No Declutter Declutter-1 Declutter-2 Declutter-3 Flight Plan Route ...
Page 173 - AIRWAYS; Figure 5-22 Airways on MFD Navigation Page; Low Altitude
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 161 FLIGHT MANAGEMENT AIRWAYS This airways discussion is based upon the North American airway structure. The airway structure in places other than North America vary by location, etc. and are not discussed in this book. Low Altitud...
Page 174 - Key from the Navigation Map Page. The Airway range can also be; Figure 5-23 Navigation Map Setup Menu - AIRWAYS Setup; Airway Display Selection
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 162 FLIGHT MANAGEMENT Airways may be displayed on the map at the pilot’s discretion using either a combination of AIRWAYS Softkey presses, or menu selections using the MENU Key from the Navigation Map Page. The Airway range can als...
Page 175 - The following range items are configurable on the airways menu:; Table 5-4 Airway Range Information; TRACK VECTOR; Figure 5-24 Navigation Map -Track Vector; Track Vector
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 163 FLIGHT MANAGEMENT The following range items are configurable on the airways menu: Airway Type Symbol Default Range (nm) Maximum Range (nm) Low Altitude Airway (LOW ALT AIRWAY) 200 500 High Altitude Airway (HI ALT AIRWAY) 300 50...
Page 176 - WIND VECTOR; Figure 5-26 Navigation Map - Wind Vector; Wind Direction
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 164 FLIGHT MANAGEMENT Figure 5-25 Navigation Map Setup Menu -TRACK VECTOR, WIND VECTOR, NAV RANGE RING, FUEL RANGE RING Setup Track Vector - On/Off - Look Ahead Time Fuel Range - On/Off - Fuel Reserve Time Wind Vector On/Off Nav Ra...
Page 177 - NAV RANGE RING; Figure 5-27 Navigation Map - Nav Range Ring; Nav Range Ring
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 165 FLIGHT MANAGEMENT NAV RANGE RING The Nav Range Ring shows the direction of travel (ground track) on a rotating compass card. The range is determined by the map range. The range is 1/4 of the map range (e.g., 37.5 nm on a 150 nm...
Page 178 - FUEL RANGE RING; which to solely base decisions on maximum flight range.; Figure 5-28 Navigation Map - Fuel Range Ring; Range to Reserve Fuel
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 166 FLIGHT MANAGEMENT FUEL RANGE RING The map can display a fuel range ring which shows the remaining flight distance. A dashed green circle indicates the selected range to reserve fuel. A solid green circle indicates the total end...
Page 179 - Figure 5-29 Navigation Map - Field of View; Lateral Field
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 167 FLIGHT MANAGEMENT FIELD OF VIEW (SVS) The map can display the boundaries of the PFD Synthetic Vision System (SVS) lateral field of view. The field of view is shown as two dashed lines forming a V shape in front of the aircraft ...
Page 180 - SELECTED ALTITUDE INTERCEPT ARC; Figure 5-30 Navigation Map - Range to Altitude Arc; Range to; Displaying/removing the selected altitude intercept arc:; Press the FMS Knob to return to the Navigation Map Page.
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 168 FLIGHT MANAGEMENT SELECTED ALTITUDE INTERCEPT ARC The map can display the location along the current track where the aircraft will intercept the selected altitude. The location will be shown as a light blue arc when the aircraf...
Page 181 - used for all phases of flight planning and navigation.; Figure 5-31 Waypoint Information Window; to turn the small; Waypoints Window is displayed when the
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 169 FLIGHT MANAGEMENT 5.3 WAYPOINTS Waypoints are predetermined geographical positions (internal database) or pilot-entered positions, and are used for all phases of flight planning and navigation. Communication and navigation freq...
Page 182 - Figure 5-32 Waypoint Information Window - Duplicate Identifier; Duplicate Message; AIRPORTS
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 170 FLIGHT MANAGEMENT Figure 5-32 Waypoint Information Window - Duplicate Identifier Duplicate Message Identifier with Duplicates Duplicate Waypoints AIRPORTS NOTE: ‘North Up’ orientation on the Airport Information Page cannot be c...
Page 183 - Figure 5-33 Airport Information Page
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 171 FLIGHT MANAGEMENT Figure 5-33 Airport Information Page Airport/Runway Diagram Navigation Map Showing Selected Airport Runway Information - Designation - Length/Width/Surface - Lighting Available Airport Information - ID/Facilit...
Page 184 - Figure 5-34 Airport Directory Page Example; Airport Information; Frequency, Phone Number
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 172 FLIGHT MANAGEMENT Figure 5-34 Airport Directory Page Example Airport Information - ID/Facility/City - Usage Type/Region Airport Directory Information Softkeys The AOPA directory information is viewed on the Airport Directory Pa...
Page 185 - Communication Frequencies; * May include Additional Information; Table 5-5 Airport Frequency Abbreviations; The system provides a; Softkey on the PFD, which gives the pilot quick access to
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 173 FLIGHT MANAGEMENT Selecting an airport for review by identifier, facility name, or location: 1) From the Airport Information Page, press the FMS Knob. 2) Use the FMS Knobs and enter an identifier, facility name, or location. 3)...
Page 186 - Figure 5-35 Nearest Airports Window on PFD; presses of the; Figure 5-36 Airport Information Window on PFD
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 174 FLIGHT MANAGEMENT Figure 5-35 Nearest Airports Window on PFD COM Freq. Info. - Identification - Frequency Airport Identifier/ Type Length of Longest Runway Approach Available Additional Airports (within 200 nm) NRST Softkey Bea...
Page 187 - Figure 5-37 Nearest Airport Page; LD APR
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 175 FLIGHT MANAGEMENT If there are no items for display in a boxed area, text indicating that fact is displayed. The currently selected airport remains in the list until it is unselected. Figure 5-37 Nearest Airport Page Nearest Ai...
Page 188 - Figure 5-38 System Setup Page - Nearest Airport Selection Criteria; Nearest Airport Criteria
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 176 FLIGHT MANAGEMENT Viewing runway information for a specific airport: 1) With the Nearest Airports Page displayed, press the RNWY Softkey; or press the MENU Key, highlight ‘Select Runway Window’; and press the ENT Key. The curso...
Page 189 - INTERSECTIONS; used to define the intersection.; Figure 5-39 Intersection Information Page
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 177 FLIGHT MANAGEMENT INTERSECTIONS NOTE: The VOR displayed on the Intersection Information Page is the nearest VOR, not necessarily the VOR used to define the intersection. The Intersection Information Page is used to view informa...
Page 190 - The list only includes waypoints that are within 200 nm.; Figure 5-40 Nearest Intersections Page
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 178 FLIGHT MANAGEMENT NOTE: The list only includes waypoints that are within 200 nm. Figure 5-40 Nearest Intersections Page Nearest Intersection Navigation Map Showing Nearest Intersection Intersection Information - Identifier/Symb...
Page 191 - NDB; Figure 5-41 NDB Information Page
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 179 FLIGHT MANAGEMENT NDB S The NDB Information Page is used to view information about NDBs. In addition to displaying a map of the currently selected NDB and surrounding area, the page displays NDB information in four boxes labele...
Page 192 - Figure 5-42 Nearest NDB Page
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 180 FLIGHT MANAGEMENT The Nearest NDB Page can be used to quickly find a NDB close to the flight path. In addition to displaying a map of the surrounding area, the page displays information for up to 25 nearest NDBs in three boxes ...
Page 193 - Figure 5-43 VOR Information Page
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 181 FLIGHT MANAGEMENT VOR S The VOR Information Page can be used to view information about VOR and ILS signals (since ILS signals can be received on a NAV receiver), or to quickly auto-tune a VOR or ILS frequency. Localizer informa...
Page 194 - Figure 5-44 Nearest VOR Page
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 182 FLIGHT MANAGEMENT 2) Highlight ‘Select VOR Window’, and press the ENT Key. 3) Press the ENT Key or turn either FMS Knob to select an identifier in the Nearest VOR Box. 4) Press the FMS Knob to remove the flashing cursor. The Ne...
Page 195 - USER WAYPOINTS; map using the; Figure 5-45 User Waypoint Information Page
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 183 FLIGHT MANAGEMENT USER WAYPOINTS The system can create and store up to 1,000 user-defined waypoints. User waypoints can be created from any map page (except PFD Inset Map, AUX-Trip Planning Page, or Procedure Pages) by selectin...
Page 196 - Figure 5-46 Nearest User Waypoint Page; CREATING USER WAYPOINTS
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 184 FLIGHT MANAGEMENT Figure 5-46 Nearest User Waypoint Page Selected User Waypoint Navigation Map Showing Selected User Waypoint Nearest User Wpt List - Identifier - Bearing/Distance from aircraft position User Waypoint Info - Com...
Page 197 - Figure 5-47 User Waypoint Information Page Menu
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 185 FLIGHT MANAGEMENT 1) Press the FMS Knob to activate the cursor. 2) Enter a user waypoint name (up to six characters). 3) Press the ENT Key. The message ‘Are you sure you want to create the new User Waypoint AAAAAA?’ is displaye...
Page 198 - EDITING USER WAYPOINTS
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 186 FLIGHT MANAGEMENT 3) Enter a user waypoint name (up to six characters). 4) Press the ENT Key to accept the selected name. The first reference waypoint box is highlighted. 5) If desired, define the type and location of the waypo...
Page 201 - Figure 5-48 Airspaces; Restricted Area
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 189 FLIGHT MANAGEMENT 5.4 AIRSPACES The system can display the following types of airspaces: Class B/TMA, Class C/TCA, Class D, Restricted, MOA (Military), Other Airspace, Air Defense Interdiction Zone (ADIZ), and Temporary Flight ...
Page 202 - Figure 5-49 System Setup Page - Airspace Alerts
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 190 FLIGHT MANAGEMENT The Airspace Alerts Box allows the pilot to turn the controlled/special-use airspace message alerts on or off. This does not affect the alerts listed on the Nearest Airspaces Page or the airspace boundaries de...
Page 203 - Figure 5-50 Nearest Airspaces Page; ALERTS; and; softkeys place the cursor in the respective list. The; Softkey is enabled only if one or
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 191 FLIGHT MANAGEMENT Map ranges for the airspace boundaries are selected from the Aviation Group in the Map Setup Menu. See Table 5-2 for the default and maximum ranges for each type of airspace and the symbol used to define the a...
Page 204 - Pressing the PFD; displayed in the message window:; Table 5-6 PFD Airspace Alert Messages
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 192 FLIGHT MANAGEMENT Pressing the PFD ALERTS Softkey displays the message window on the PFD. The following airspace alerts are displayed in the message window: Message Comments INSIDE ARSPC – Inside airspace. The aircraft is insid...
Page 205 - The Direct-to method of navigation, initiated by pressing the; Location of Destination
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 193 FLIGHT MANAGEMENT 5.5 DIRECT-TO-NAVIGATION The Direct-to method of navigation, initiated by pressing the Direct-to Key on either the MFD or PFD, is quicker to use than a flight plan when the desire is to navigate to a single po...
Page 206 - Activation Command; Figure 5-53 Waypoint Submenu; Waypoint Submenu
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 194 FLIGHT MANAGEMENT Figure 5-52 Direct-to Window - PFD Direct-to Point Info - Identifier/Symbol/City - Facility Name Activation Command Direct-to Point Info - Bearing/Distance - Desired Course VNV Constraints - Altitude at Arriva...
Page 208 - created at the location of the map arrow.; Page Menu
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 196 FLIGHT MANAGEMENT 4) Press the ENT Key. The cursor is now displayed on ‘ACTIVATE?’. 5) Press the ENT Key again to activate the direct-to. Direct-to destinations may also be selected by using the pointer on the navigation map pa...
Page 210 - Removing a VNV altitude constraint:; With ‘Clear Vertical Constraints’ highlighted, press the; Figure 5-55 Direct-to Window - Clearing Vertical Constraints
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 198 FLIGHT MANAGEMENT Removing a VNV altitude constraint: 1) Press the Direct-to Key to display the Direct-to Window. 2) Press the MENU Key. 3) With ‘Clear Vertical Constraints’ highlighted, press the ENT Key. Figure 5-55 Direct-to...
Page 211 - Flight Plan Leg Type; Table 5-7 Flight Plan Leg Symbols
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 199 FLIGHT MANAGEMENT 5.6 FLIGHT PLANNING Flight planning on the system consists of building a flight plan by entering waypoints one at a time, adding waypoints along airways, and inserting departures, airways, arrivals, or approac...
Page 212 - The following could cause the airway update to fail:; FLIGHT PLAN CREATION; There are three methods to create or modify a flight plan:; Figure 5-56 Active Flight Plan Page
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 200 FLIGHT MANAGEMENT The following could cause the airway update to fail: • Airway identifier, entry waypoint or exit waypoint not found in the new database. • Airway entry/exit waypoint is not an acceptable waypoint for the airwa...
Page 213 - Figure 5-57 Active Flight Plan Window on PFD; Creating an active flight plan:; FPL; Turn the small
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 201 FLIGHT MANAGEMENT Active Flight Plan Comment Figure 5-57 Active Flight Plan Window on PFD Active Flight Plan Leg Active Flight Plan Waypoint List - Waypoint ID - Desired Track to Waypoint - Distance to Waypoint - Airway Identif...
Page 215 - Figure 5-59 Flight Plan Import
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 203 FLIGHT MANAGEMENT Flight plans can be imported from an SD Card or exported to an SD Card from the Stored Flight Plan Page. Importing a Flight Plan from an SD Card 1) Insert the SD card containing the flight plan in the top card...
Page 216 - Figure 5-60 Flight Plan Export
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 204 FLIGHT MANAGEMENT NOTE: If the imported flight plan contains a waypoint with a name that duplicates the name of a waypoint already stored on the system, the system compares the coordinates of the imported waypoint with those of...
Page 217 - ADDING WAYPOINTS TO AN EXISTING FLIGHT PLAN; Figure 5-61 Stored Flight Plan Page; Stored Flight Plan Selected; Softkeys; Figure 5-62 Active Flight Plan Page - FPL Full; Flight Plan Full Message; Adding a waypoint to a stored flight plan:; On the Flight Plan Catalog Page, press the; Knob to activate the cursor.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 205 FLIGHT MANAGEMENT ADDING WAYPOINTS TO AN EXISTING FLIGHT PLAN Waypoints can be added to the active flight plan or any stored flight plan. Choose the flight plan, select the desired point of insertion, enter the waypoint, and it...
Page 218 - Figure 5-63 Duplicate Waypoints Window
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 206 FLIGHT MANAGEMENT 3) Press the EDIT Softkey; or press the ENT Key, turn the large FMS Knob clockwise to select “EDIT” and press the ENT Key. The Stored Flight Plan Page is displayed. 4) Select the point in the flight plan to ad...
Page 219 - ADDING AIRWAYS TO A FLIGHT PLAN; Figure 5-64 Select Airway Page - Selecting Airway
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 207 FLIGHT MANAGEMENT Creating and adding user waypoints to the active flight plan: 1) Press the Joystick to activate the panning function on the Active Flight Plan Page and pan to the map location of the desired user waypoint. 2) ...
Page 220 - Turn the; Figure 5-65 Select Airway Page - Selecting Exit Point
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 208 FLIGHT MANAGEMENT 5) Turn the FMS Knob to select the desired airway from the list, and press the ENT Key. Low altitude airways are shown first in the list, followed by “all” altitude airways, and then high altitude airways. 6) ...
Page 221 - • Starting from AMANO, the airway can be flown only to LIBRO.; ADDING PROCEDURES TO A STORED FLIGHT PLAN; Figure 5-67 Stored Flight Plan Page; Flight Plan Name
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 209 FLIGHT MANAGEMENT RESTRICTIONS ON ADDING AIRWAYS Some airways have directional restrictions on all or part of the route. Airway “A2” in Europe has a directional restriction over the whole route such that it can be flown only in...
Page 222 - Figure 5-68 Departure Loading Page - Selecting the Departure
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 210 FLIGHT MANAGEMENT DEPARTURE (DP) A Departure Procedure (DP) is loaded at the departure airport in the flight plan. Only one departure can be loaded at a time in a flight plan. The route is defined by selection of a departure, t...
Page 223 - Figure 5-69 Departure Loading Page - Selecting Transition
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 211 FLIGHT MANAGEMENT Figure 5-69 Departure Loading Page - Selecting Transition Departure Airport Selected Departure Departure Transition Points Available Selected Runway Selected Departure End Point Preview of Selected Departure S...
Page 224 - Figure 5-71 Arrival Loading Page - Selecting the Arrival
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 212 FLIGHT MANAGEMENT ARRIVAL (STAR) A Standard Terminal Arrival (STAR) is loaded at the destination airport in the flight plan. Only one arrival can be loaded at a time in a flight plan. The route is defined by selection of an arr...
Page 225 - Figure 5-72 Arrival Loading Page - Selecting the Transition
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 213 FLIGHT MANAGEMENT Figure 5-72 Arrival Loading Page - Selecting the Transition Destination Airport Selected Arrival Transitions Available with DBRY1Arrival Waypoint Sequence Preview of Selected Arrival Selected Transition Figure...
Page 226 - Figure 5-74 Approach Loading Page - Selecting the Approach
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 214 FLIGHT MANAGEMENT APPROACH (APPR) An Approach Procedure (APPR) can be loaded at any airport that has an approach available. Only one approach can be loaded at a time in a flight plan. The route for a selected approach is define...
Page 227 - Figure 5-75 Approach Loading Page - Selecting the Transition
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 215 FLIGHT MANAGEMENT Figure 5-75 Approach Loading Page - Selecting the Transition Destination Airport Selected Approach Transitions Available with Selected Approach Approach Waypoint Sequence Preview of Selected Approach Load Appr...
Page 228 - FLIGHT PLAN STORAGE; Figure 5-77 Stored Flight Plan Information
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 216 FLIGHT MANAGEMENT FLIGHT PLAN STORAGE The system can store up to 99 flight plans, numbered 1 through 99. The active flight plan is erased when the system is powered off or when another flight plan is activated. Details about ea...
Page 230 - FLIGHT PLAN EDITING; navigation as soon as they are entered.; DELETING THE ACTIVE FLIGHT PLAN
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 218 FLIGHT MANAGEMENT 3) Select the DELETE Softkey; press the CLR Key; or press the MENU Key, highlight ‘Delete Flight Plan’, and press the ENT Key. The ‘Delete Flight Plan XX?’ window is displayed. 4) With ‘OK’ highlighted, press ...
Page 233 - ALONG TRACK OFFSETS
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 221 FLIGHT MANAGEMENT 7) With ‘OK’ highlighted, press the ENT Key. To cancel the request, press the CLR Key, or highlight ‘CANCEL’ and press the ENT Key. 8) Press the FMS Knob to remove the flashing cursor. CHANGING FLIGHT PLAN COM...
Page 234 - Figure 5-78 Along Track Offset
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 222 FLIGHT MANAGEMENT An along track offset distance cannot be modified once entered. If the along track offset distance must be changed, the existing along track offset waypoint must be deleted and a new one created with the new o...
Page 235 - PARALLEL TRACK; Figure 5-79 Active Flight Plan Window - Selecting Parallel Track; Selecting Parallel
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 223 FLIGHT MANAGEMENT PARALLEL TRACK The Parallel Track (PTK) feature allows creation of a parallel course offset of 1 to 50 nm left or right of the current flight plan. When Parallel Track is activated, the course line drawn on th...
Page 236 - Figure 5-80 Parallel Track Window
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 224 FLIGHT MANAGEMENT Figure 5-80 Parallel Track Window Offset Direction Offset Distance Activation Prompt Figure 5-81 Parallel Track Active Parallel Track Waypoints - TIFTO-p - TOP-p - SLN-p - HYS-p - LAA-p Activating Parallel Tra...
Page 237 - Figure 5-82 Parallel Track Unavailable; Subdued Prompt; Figure 5-83 Cancelling Parallel Track; Cancel Prompt
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 225 FLIGHT MANAGEMENT If the parallel track proposed by the offset direction and distance is not allowed by the system, the activation prompt is displayed, but disabled. Parallel Track cannot be activated if a course is set using d...
Page 238 - ACTIVATING A FLIGHT PLAN LEG; Current
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 226 FLIGHT MANAGEMENT ACTIVATING A FLIGHT PLAN LEG The system allows selection of a highlighted leg as the “active leg” (the flight plan leg which is currently used for navigation guidance). Activating a flight plan leg: 1) Press t...
Page 239 - Figure 5-85 Active Flight Plan Page - New Active Leg; New Active; Confirmation Window; INVERTING A FLIGHT PLAN
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 227 FLIGHT MANAGEMENT Figure 5-85 Active Flight Plan Page - New Active Leg New Active Flight Plan Leg Confirmation Window INVERTING A FLIGHT PLAN Any flight plan may be inverted (reversed) for navigation back to the original depart...
Page 240 - FLIGHT PLAN VIEWS; Figure 5-86 Active Flight Plan - Leg to Leg vs. Cumulative Distance; Active Flight Plan Leg to Leg Distance; WIDE
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 228 FLIGHT MANAGEMENT FLIGHT PLAN VIEWS Information about flight plans can be viewed in more than one way. The active flight plan can be configured to show cumulative distance over the length of the flight plan or the distance for ...
Page 241 - COLLAPSING AIRWAYS
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 229 FLIGHT MANAGEMENT Figure 5-87 Active Flight Plan - Wide vs. Narrow View WIDE Softkey, NARROW Softkey, LEG-LEG Softkey, CUM Softkey Active Flight Plan Narrow View Active Flight Plan Wide View COLLAPSING AIRWAYS The system allows...
Page 242 - CLOSEST POINT OF FPL
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 230 FLIGHT MANAGEMENT Figure 5-88 Expanded/Collapsed Airways Q3.FEPOT Airway Collapsed View Expanded View Collapsing/expanding the airways in the active flight plan: 1) Press the FPL Key to display the Active Flight Plan Page (MFD)...
Page 243 - VERTICAL NAVIGATION; Figure 5-89 Enabling/Disabling Vertical Navigation; ENBL VNV
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 231 FLIGHT MANAGEMENT 5.7 VERTICAL NAVIGATION NOTE: The system supports vertical navigation for all lateral leg types except for CA, CI, FA, FM, HA, HM, PI, VA, VD, VI, VR, and VM. Vertical constraints are not retained in stored fl...
Page 244 - constraint “designated” for vertical guidance. Selecting the; Figure 5-90 Vertical Navigation Direct-To; Current Vertical Navigation Profile; VNV PROF
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 232 FLIGHT MANAGEMENT Canceling vertical navigation results in vertical deviation (V DEV), vertical speed required (VS REQ), and time to top of descent/bottom of descent (TIME TO TOD/BOD) going invalid. The Vertical Deviation Indic...
Page 245 - ALTITUDE CONSTRAINTS; Figure 5-91 Waypoint Altitude Constraints
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 233 FLIGHT MANAGEMENT 4) Press the ENT Key. Vertical guidance begins to the altitude constraint for the selected waypoint. 5) Press the FMS Knob to remove the flashing cursor. The vertical navigation profile can be modified by dire...
Page 246 - Table 5-8 Altitude Constraint Size and Color Coding
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 234 FLIGHT MANAGEMENT White Text Light Blue Text Light Blue Subdued Text Large Text Altitude calculated by the system estimating the altitude of the aircraft as it passes over the navigation point. This altitude is provided as a re...
Page 247 - An altitude constraint is invalid if:
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 235 FLIGHT MANAGEMENT An altitude constraint is invalid if: • Meeting the constraint requires the aircraft to climb • Meeting the constraint requires the maximum flight path angle or maximum vertical speed to be exceeded • The alti...
Page 249 - DEPARTURES; LOADING A DEPARTURE INTO THE ACTIVE FLIGHT PLAN; PROC
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 237 FLIGHT MANAGEMENT 5.8 PROCEDURES The system can access the whole range of instrument procedures available. Departures (DPs), arrivals (STARs), and non-precision and precision approaches (APPRs) are stored within the database an...
Page 250 - Figure 5-92 Departure Selection
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 238 FLIGHT MANAGEMENT Figure 5-92 Departure Selection Departure Airport Departure Preview Available Procedure Actions Departure Choices Loaded Procedures Procedure Loading Page Selection Softkeys Figure 5-93 Departure Loading Loade...
Page 252 - ARRIVALS; LOADING AN ARRIVAL INTO THE ACTIVE FLIGHT PLAN; Figure 5-94 Arrival Selection; Destination Airport
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 240 FLIGHT MANAGEMENT ARRIVALS A Standard Terminal Arrival (STAR) can be loaded at any airport that has one available. Only one arrival can be loaded at a time in a flight plan. If an arrival is loaded when another arrival is alrea...
Page 253 - Figure 5-95 Arrival Loading; Loaded Arrival
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 241 FLIGHT MANAGEMENT Figure 5-95 Arrival Loading Loaded Arrival Selected Arrival Procedure Loading Page Selection Softkeys Viewing available arrivals at an airport: 1) From the Airport Information Page (first page in the WPT group...
Page 254 - APPROACHES; the proper frequency and selecting that NAV receiver on the
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 242 FLIGHT MANAGEMENT REMOVING AN ARRIVAL FROM THE ACTIVE FLIGHT PLAN When plans change while flying IFR, arrivals can be easily removed from the Active Flight Plan. Removing an arrival from the active flight plan: 1) Press the FPL...
Page 255 - HSI Annunciation; LNAV; Approach Type; LPV; Table 5-9 Approach Types; LOADING AN APPROACH INTO THE ACTIVE FLIGHT PLAN
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 243 FLIGHT MANAGEMENT The system WAAS GPS allows for flying LNAV, LNAV/VNAV, and LPV approaches according to the published chart. LNAV+V is a standard LNAV approach with advisory vertical guidance provided for assistance in maintai...
Page 256 - Figure 5-96 Approach Selection
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 244 FLIGHT MANAGEMENT Figure 5-96 Approach Selection Destination Airport Approach Preview Available Procedure Actions Approach Choices Loaded Procedures Figure 5-97 Approach Loading Loaded Approach Selected Approach LOAD or ACTIVAT...
Page 258 - makes the inbound course to the FAF waypoint active.; REMOVING AN APPROACH FROM THE ACTIVE FLIGHT PLAN
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 246 FLIGHT MANAGEMENT ACTIVATING AN APPROACH A previously loaded approach can be activated from the Procedures Window. Activating a previously loaded approach: 1) Press the PROC Key. The Procedures Window is displayed with ‘Activat...
Page 259 - Activating a missed approach in the active flight plan:; COURSE TO ALTITUDE; Figure 5-98 Course to Altitude; Course to Altitude Leg
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 247 FLIGHT MANAGEMENT MISSED APPROACH Activating a missed approach in the active flight plan: Press the Go Around Button. Or : Fly past the MAP, and press the SUSP Softkey on the PFD. Or : 1) Press the PROC Key. 2) Turn the FMS Kno...
Page 260 - TRIP PLANNING; located in the AUX Page Group.; Figure 5-99 Trip Planning Page
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 248 FLIGHT MANAGEMENT 5.9 TRIP PLANNING The system allows the pilot to view trip planning information, fuel information, and other information for a specified flight plan or flight plan leg based on automatic data, or based on manu...
Page 261 - waypoints are the endpoints of the selected leg.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 249 FLIGHT MANAGEMENT TRIP STATISTICS The trip statistics are calculated based on the selected starting and ending waypoints and the trip planning inputs. In flight plan mode (FPL) with a stored flight plan selected (NN), and the e...
Page 262 - • Time of; OTHER STATISTICS; Figure 5-100 Trip Planning Page - Flight Plan Mode; Starting and Ending Waypoint of; Figure 5-101 Trip Planning Page - Waypoint Mode; Selected Starting and Ending Waypoints
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 250 FLIGHT MANAGEMENT FUEL STATISTICS The fuel statistics are calculated based on the selected starting and ending waypoints and the trip planning inputs. Some of the calculated trip statistics are dashed when the selected leg of t...
Page 263 - plan and leg selection.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 251 FLIGHT MANAGEMENT Selecting automatic or manual page mode: Select the AUTO Softkey or the MANUAL Softkey; or press the MENU Key, highlight ‘Auto Mode’ or ‘Manual Mode’, and press the ENT Key. Selecting flight plan or waypoint m...
Page 264 - RAIM PREDICTION; Figure 5-102 RAIM Prediction; Predicting RAIM availability at a selected waypoint:; Knob. The RAIM Prediction ‘WAYPOINT’ field is highlighted.; Key to accept the waypoint entry.
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 252 FLIGHT MANAGEMENT 5.10 RAIM PREDICTION RAIM (Receiver Autonomous Integrity Monitoring) is a GPS receiver function that performs a consistency check on all tracked satellites. RAIM ensures that the available satellite geometry a...
Page 265 - RAIM PREDICTION Box as follows:
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 253 FLIGHT MANAGEMENT 5) Turn the FMS Knobs to enter an arrival time and press the ENT Key. 6) Turn the FMS Knobs to enter an arrival date and press the ENT Key. 7) Press the ENT Key with ‘COMPUTE RAIM?’ highlighted to begin the co...
Page 267 - NAVIGATING A FLIGHT PLAN; should be considered not current.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 255 FLIGHT MANAGEMENT 5.11 NAVIGATING A FLIGHT PLAN The following discussion is an example of navigating a flight plan with the WAAS capable GPS system while the system provides vertical guidance through descents. A lateral flight ...
Page 268 - Enter V4 into the flight plan.
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 256 FLIGHT MANAGEMENT 3) ATC now assigns routing to join V4. A heading of 290º is assigned to intercept V4. The aircraft turns to heading 290° as seen in Figure 5-106. Figure 5-106 Assigned Heading of 290º 4) Enter V4 into the flig...
Page 269 - The desired entry point for V4 (TOP) must be entered. Turn the large; Knob to highlight the desired flight; Figure 5-107 Begin Adding V4 to the Flight Plan; Figure 5-108 Entering V4 Entry Point
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 257 FLIGHT MANAGEMENT b) The desired entry point for V4 (TOP) must be entered. Turn the large FMS Knob to highlight the desired flight plan insertion point (SLN) as shown in Figure 5-107. When the V4 entry point (TOP) is inserted, ...
Page 270 - Figure 5-109 TOP Inserted into the Flight Plan
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 258 FLIGHT MANAGEMENT d) Press the ENT Key. TOP is inserted into the flight plan as in Figure 5-109. Figure 5-109 TOP Inserted into the Flight Plan e) With SLN still highlighted as in Figure 5-109, turn the small FMS Knob clockwise...
Page 271 - Figure 5-111 List of Available Exits for V4; If necessary, turn either
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 259 FLIGHT MANAGEMENT h) Press the ENT Key. The list of available exits for V4 is now displayed as in Figure 5-111. Figure 5-111 List of Available Exits for V4 i) If necessary, turn either FMS Knob to select the desired exit. In th...
Page 272 - Figure 5-113 V4 is Loaded in the Flight Plan; Figure 5-114 Comfirm Active Leg
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 260 FLIGHT MANAGEMENT l) V4 is now loaded into the flight plan as shown in Figure 5-113. Figure 5-113 V4 is Loaded in the Flight Plan 5) Making V4 the active leg of the flight plan. a) Press the FMS Knob to activate the cursor. b) ...
Page 273 - Verify the displayed leg is the desired leg and press the
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 261 FLIGHT MANAGEMENT d) Verify the displayed leg is the desired leg and press the ENT Key. Note in Figure 5-115, the magenta arrow in the flight plan window and magenta line on the map indicating V4 is now the active flight plan l...
Page 274 - Figure 5-116 Turn on to Active Leg
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 262 FLIGHT MANAGEMENT 7) As the CDI approaches center, the aircraft turns onto the active leg as seen in Figure 5-116. Figure 5-116 Turn on to Active Leg 8) At SLN, Victor Airway 244 (V244) is intercepted. Turn prompts are displaye...
Page 275 - As seen in Figure 5-118, V244 is now the active flight plan leg.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 263 FLIGHT MANAGEMENT 9) As seen in Figure 5-118, V244 is now the active flight plan leg. Figure 5-118 V244 Now Active Leg
Page 276 - Figure 5-119 HYS to LAA Leg Active; Figure 5-120 Direct To OPSHN
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 264 FLIGHT MANAGEMENT 10) At Lamar VOR (LAA) V263 is intercepted. See Figure 5-119. Figure 5-119 HYS to LAA Leg Active 11) ATC grants clearance to proceed direct to the OPSHN intersection to begin the arrival procedure. ATC advises...
Page 277 - Turn the large; Figure 5-121 Enter VNV Altitude; An altitude of 10,000 feet is entered as requested by ATC.; Figure 5-122 Enter VNV Offset Distance
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 265 FLIGHT MANAGEMENT d) Turn the large FMS Knob to place the cursor in the VNV altitude field as shown in Figure 5-121. Figure 5-121 Enter VNV Altitude e) An altitude of 10,000 feet is entered as requested by ATC. f) Press the ENT...
Page 279 - ‘SELECT APPROACH’ should be highlighted as shown in Figure 5-124.; Figure 5-124 Procedures Window; Figure 5-125 List of Available Approaches
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 267 FLIGHT MANAGEMENT b) ‘SELECT APPROACH’ should be highlighted as shown in Figure 5-124. Figure 5-124 Procedures Window c) Press the ENT Key. A list of available approaches for the destination airport is displayed as in Figure 5-...
Page 280 - Figure 5-126 List of Available Transitions
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 268 FLIGHT MANAGEMENT e) Press the ENT Key. A list of available transitions for the selected approach is displayed as in Figure 5-126. Figure 5-126 List of Available Transitions f) Turn either FMS Knob to select the desired transit...
Page 281 - Figure 5-127 Barometric Minimums Set; With ‘LOAD?’ highlighted, again press the; Key. The selected approach is added to the flight plan as seen; Figure 5-128 Loaded Approach
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 269 FLIGHT MANAGEMENT Figure 5-127 Barometric Minimums Set i) With ‘LOAD?’ highlighted, again press the ENT Key. The selected approach is added to the flight plan as seen in Figure 5-128. Figure 5-128 Loaded Approach
Page 282 - Knob to highlight the desired altitude.; Knob to deactivate the cursor.; Figure 5-129 Vertical Guidance is Active to the FAF
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 270 FLIGHT MANAGEMENT 13) Note the altitude constraints associated with each of the approach waypoints as seen in Figure 5-129. These altitudes are loaded from the database and are displayed as light blue text, indicating these val...
Page 283 - Knob to enter the desired value.; Figure 5-130 Adjusting the Descent
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 271 FLIGHT MANAGEMENT 14) As the aircraft approaches OPSHN, it may be desirable to adjust the speed, or steepness of the upcoming descent. The default Flight Path Angle (FPA) is -3.0 degrees and a required vertical speed is compute...
Page 284 - Required Vertical
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 272 FLIGHT MANAGEMENT 15) As seen in Figure 5-131, the aircraft is approaching TOD. Note the target vertical speed required to reach the selected altitude. The Vertical Deviation Indicator (VDI) and the Required Vertical Speed Indi...
Page 285 - Figure 5-133 VDI & RVSI Showing Correctly Established Descent; Align Actual Vertical Speed
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 273 FLIGHT MANAGEMENT 16) Upon reaching TOD, a descent vertical speed is established by placing the VSI pointer in line with the RVSI as shown in Figure 5-133. Figure 5-133 VDI & RVSI Showing Correctly Established Descent Align...
Page 286 - Figure 5-135 Turn to intercept OPSHN to FSHER Leg
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 274 FLIGHT MANAGEMENT 18) The aircraft is approaching OPSHN. The upcoming turn and next heading are annunciated at the top left of the PFD as seen in Figure 5-135. Initiate the turn and maneuver the aircraft on a track through the ...
Page 287 - Figure 5-136 Tracking the OPSHN to FSHER Leg
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 275 FLIGHT MANAGEMENT 19) After passing OPSHN, the next leg of the arrival turns magenta as shown in Figure 5-136. The magenta arrow in the flight plan list now indicates the OPSHN to FSHER leg of the arrival procedure is now activ...
Page 288 - Figure 5-137 Approaching PYNON
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 276 FLIGHT MANAGEMENT Figure 5-137 Approaching PYNON
Page 289 - Figure 5-138 Approach is Now Active; Figure 5-139 Manually Activate Approach
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 277 FLIGHT MANAGEMENT 21) Upon passing PYNON the approach procedure automatically becomes active. The approach may be activated at any point to proceed directly to the IAF. In this example, the aircraft has progressed through the f...
Page 290 - The aircraft altitude is 9,000 feet upon reaching HABUK.; Figure 5-140 Descending Turn to the Initial Approach Fix (IAF)
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 278 FLIGHT MANAGEMENT 22) The IAF is the next waypoint. At the TOD, establish a descent vertical speed as previously discussed in Step 16. The aircraft altitude is 9,000 feet upon reaching HABUK. Figure 5-140 Descending Turn to the...
Page 291 - Figure 5-141 Descending to the FAF
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 279 FLIGHT MANAGEMENT 23) After crossing FALUR the next waypoint is the FAF. The flight phase changes to LPV on the HSI indicating the current phase of flight is in Approach Mode and the approach type is LPV. CDI scaling changes ac...
Page 292 - Figure 5-142 Descending to the Missed Approach Point
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 280 FLIGHT MANAGEMENT 24) After crossing CEGIX, the aircraft continues following the glidepath to maintain the descent to “AT or ABOVE” 6,370 feet at the Missed Approach Point (MAP) (RW35R) as seen in Figure 5-142. Figure 5-142 Des...
Page 293 - suspended past the MAP. Press the Go Around Button, or press the; Figure 5-143 Missed Approach Active
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 281 FLIGHT MANAGEMENT 25) Upon reaching the MAP, it is decided to execute a missed approach. Automatic waypoint sequencing is suspended past the MAP. Press the Go Around Button, or press the SUSP Softkey on the PFD, to resume autom...
Page 294 - Figure 5-144 Establishing the Holding Pattern
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 282 FLIGHT MANAGEMENT 26) The aircraft continues climbing to “AT or ABOVE” 10,000 feet at MOGAL. A holding pattern is established at the MAHP (MOGAL) as shown in Figure 5-144. Figure 5-144 Establishing the Holding Pattern 27) The a...
Page 295 - ABNORMAL OPERATION; awareness until GPS-derived position data is restored.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 283 FLIGHT MANAGEMENT 5.12 ABNORMAL OPERATION This section discusses the Dead Reckoning mode of operation and the subsequent indications. NOTE: Dead Reckoning Mode only functions in Enroute (ENR) or Oceanic (OCN) phase of flight. I...
Page 296 - Figure 5-146 Dead Reckoning Mode - GPS Derived Data Shown in Yellow; or when a 65° bank angle is reached.
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 284 FLIGHT MANAGEMENT Distance & Bearing GPS Navigation Lost Message Dead Reckoning Annunciaion Figure 5-146 Dead Reckoning Mode - GPS Derived Data Shown in Yellow Dead Reckoning Annunciation Subdued Rotorcraft Symbol Nav Data ...
Page 297 - HAZARD AVOIDANCE; SECTION 6 HAZARD AVOIDANCE; flight safety associated with weather, terrain, and air traffic.; Weather; • GSR 56H GFDS Worldwide Weather (Optional); Terrain Avoidance; • Helicopter Terrain Awareness Warning System (HTAWS); XM WX SATELLITE WEATHER; for use to penetrate hazardous weather.; ACTIVATING SERVICES; • The label on the back of the Data Link Receiver
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 285 HAZARD AVOIDANCE SECTION 6 HAZARD AVOIDANCE The G1000H hazard avoidance features are designed to provide advisory information of potential hazards to flight safety associated with weather, terrain, and air traffic. This section...
Page 298 - or entertainment programming provided through the GDL 69AH.; Figure 6-1 XM Information Page; USING XM WX SATELLITE WEATHER PRODUCTS
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 286 HAZARD AVOIDANCE SiriusXM uses the coded IDs to send an activation signal that allows the system to display weather data and/ or entertainment programming provided through the GDL 69AH. Activating XM WX Satellite Weather and Si...
Page 299 - If for any reason, a weather product is not refreshed within the; Expiration Time
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 287 HAZARD AVOIDANCE 4) Press the MENU Key. 5) Turn the FMS Knob to highlight ‘Display XM Weather’ and press the ENT Key. Page title displays ‘MAP - WEATHER DATA LINK (XM)’ to indicate XM WX is the selected weather datalink source....
Page 300 - Weather Product; no product image; Table 6-1 Weather Product Symbols and Data Timing
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 288 HAZARD AVOIDANCE Weather Product Symbol Expiration Time (Minutes) Refresh Rate (Minutes) Next-generation Radar (NEXRAD) 30 5 (U.S.) 10 (Canada) Cloud Top (CLD TOP) 60 15 Echo Top (ECHO TOP) 30 7.5 XM Lightning (LTNG) 30 5 Cell ...
Page 301 - Table 6-2 Weather Product Display Maps
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 289 HAZARD AVOIDANCE Table 6-2 shows which XM WX products can be displayed (indicated with a ‘+’ symbol) on specific maps. Weather Product PFD Inset Map Navigation Map P age W eather Data Link (XM) P age W eather Information Page A...
Page 302 - Figure 6-3 Weather Data Link Weather Product Softkeys
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 290 HAZARD AVOIDANCE Softkeys control the display of weather information on most MFD pages and the PFD Inset Map (Figure 6-3 shows the weather product softkeys for the Weather Data Link (XM) Page). When a weather product is selecte...
Page 304 - Figure 6-7 Navigation Map Page Setup Menu
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 292 HAZARD AVOIDANCE Maps besides the Weather Data Link (XM) Page use settings based on those selected for the Navigation Map Page. Setting up and customizing weather data for the Navigation Map Page: 1) Select the Navigation Map P...
Page 306 - departure and enroute evaluation.
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 294 HAZARD AVOIDANCE NEXRAD NOTE: NEXRAD data cannot be displayed at the same time as turbulence, icing, or terrain. WSR-88D, or NEXRAD (NEXt-generation RADar), is a network of 158 high-resolution Doppler radar systems that are ope...
Page 307 - No Radar Coverage; Figure 6-11 NEXRAD Data with Legend; are indicated in gray shade of purple.; measures the radar reflectivity ratio, or the energy reflected; back to; the radar receiver (designated by the
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 295 HAZARD AVOIDANCE Displaying NEXRAD weather information: 1) Select the MAP Softkey (for the PFD Inset Map, select the INSET Softkey). This step is not necessary on the Weather Data Link (XM) Page. 2) Select the NEXRAD Softkey. C...
Page 308 - NEXRAD radar images may have certain limitations:; highest; level of NEXRAD data; Block Area is 4 km; • Ground clutter
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 296 HAZARD AVOIDANCE neXRaD l imitatiOns NEXRAD radar images may have certain limitations: • NEXRAD base reflectivity does not provide sufficient information to determine cloud layers or precipitation characteristics (wet hail vs. ...
Page 309 - • Radar coverage extends to 55oN.; No Coverage Above 55
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 297 HAZARD AVOIDANCE neXRaD l imitatiOns (c anaDa ) • Radar coverage extends to 55ºN. • Any precipitation displayed between 52ºN and 55ºN is displayed as mixed because it is unknown. Figure 6-13 NEXRAD Data - Canada No Coverage Abo...
Page 310 - Figure 6-14 Echo Tops Data; Displaying Echo Tops information:; ECHO TOP; Softkey when Echo Tops is selected for; Figure 6-15 Echo Tops Legend
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 298 HAZARD AVOIDANCE ECHO TOPS NOTE: Display of Echo Tops cannot be displayed at the same time as Cloud Tops and NEXRAD. Echo Tops data (Figure 6-14) shows the location, elevation, and direction of the highest radar echo. The highe...
Page 311 - CLOUD TOPS; Cloud Tops and Echo Tops cannot be displayed at the same time.; Figure 6-16 Cloud Tops Data; Displaying Cloud Tops information:; CLD TOP; Softkey when Cloud Tops is selected for; Figure 6-17 Cloud Tops Legend
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 299 HAZARD AVOIDANCE The display of radar coverage is always active when either NEXRAD or ECHO TOPS is selected. Areas where NEXRAD radar coverage and Echo Tops information is not currently available or is not being collected are i...
Page 312 - Figure 6-18 Lightning Data; Lightning; Figure 6-19 Lightning Legend
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 300 HAZARD AVOIDANCE XM LIGHTNING Lightning data (Figure 6-18) shows the approximate location of cloud-to-ground lightning strikes. A strike icon represents a strike that has occurred within a two-kilometer region. The exact locati...
Page 313 - Figure 6-20 Cell Movement Data; Storm Cells; displayed on the following maps:; Figure 6-21 Cell Movement Legend
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 301 HAZARD AVOIDANCE CELL MOVEMENT Cell Movement data (Figure 6-20) shows the location and movement of storm cells as identified by the ground-based system. Cells are represented by yellow squares, with direction of movement indica...
Page 314 - SIGMET (SIGnificant METeorological Information); AIRMET Mountain; Displaying SIGMETs and AIRMETs:; RANGE; Knob and move the Map Pointer over the; Softkey when SIGMETs and; Figure 6-23 Sample SIGMET Text
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 302 HAZARD AVOIDANCE SIGMETS AND AIRMETS SIGMET (SIGnificant METeorological Information) and AIRMET (AIRmen’s METeorological Information) are issued for potentially hazardous weather. A Convective SIGMET is issued for hazardous con...
Page 315 - Instructions for; Displaying METAR and TAF text:; Knob and pan to the desired airport.; Key. The Weather Information Page is shown with METAR and TAF text.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 303 HAZARD AVOIDANCE METARS AND TAFS NOTE: Atmospheric pressure as reported for METARs is given in hectopascals (hPa), except for in the United States, where it is reported in inches of mercury (in Hg). Temperatures are reported in...
Page 316 - Figure 6-26 METAR and TAF Text on the Weather Information Page; METAR Text for the
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 304 HAZARD AVOIDANCE 4) Turn the FMS Knob or the ENT Key to scroll through the METAR and TAF text. METAR text must be completely scrolled through before scrolling through the TAF text. 5) Press the FMS Knob or the CLR Key to return...
Page 317 - Softkey when METARs are selected for display.; Figure 6-27 METAR Legend
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 305 HAZARD AVOIDANCE Displaying raw METAR text on the Active Flight Plan Page: 1) Select the Active Flight Plan Page on the MFD. 2) Press the FMS Knob to activate the cursor. 3) Turn the large FMS Knob to highlight a waypoint with ...
Page 318 - Figure 6-28 24-Hour Surface Analysis and City Forecast Data; Figure 6-29 Surface Analysis Legend
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 306 HAZARD AVOIDANCE SURFACE ANALYSIS AND CITY FORECAST NOTE: Surface Analysis and City Forecast data are displayed only within the installed navigation database service area. Surface Analysis and City Forecast information is avail...
Page 319 - Figure 6-30 Freezing Level Data; Displaying Freezing Level information:; MORE WX; FRZ LVL; Softkey when Freezing Level data is; Figure 6-31 Freezing Level Legend
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 307 HAZARD AVOIDANCE FREEZING LEVELS Freezing Level data shows the color-coded contour lines for the altitude and location at which the first isotherm is found (Figure 6-30). When no data is displayed for a given altitude, the data...
Page 320 - Softkey when Winds Aloft is selected; Figure 6-33 Winds Aloft Data with Legend
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 308 HAZARD AVOIDANCE WINDS ALOFT Winds Aloft data (Figure 6-32) shows the forecasted wind speed and direction at the surface and at selected altitudes. Altitude can be displayed in 3,000-foot increments from the surface up to 42,00...
Page 321 - from the; Figure 6-34 County Flood Warning; Displaying County Warning information:; COUNTY; Softkey when County Warnings; Figure 6-35 County Warnings Legend
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 309 HAZARD AVOIDANCE COUNTY WARNINGS County data (Figure 6-34) provides specific public awareness and protection weather warnings from the National Weather Service (NWS). This can include information on fires, tornadoes, severe thu...
Page 322 - Figure 6-36 Cyclone Data Selected for Display; Cyclone; CYCLONE; Softkey when Cyclones are selected to be; Figure 6-37 Cyclone Legend
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 310 HAZARD AVOIDANCE CYCLONE The Cyclone weather product (Figure 6-36) shows the current location of cyclones (hurricanes), tropical storms, and their projected tracks. Figure 6-36 Cyclone Data Selected for Display Cyclone Displayi...
Page 323 - Icing data cannot be displayed at the same time as NEXRAD data.; SLD; Softkey when Icing is selected for; Figure 6-39 Icing Potential Legend
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 311 HAZARD AVOIDANCE ICING (CIP & SLD) NOTE: Icing data cannot be displayed at the same time as NEXRAD data. Current Icing Product (CIP) data shows a graphical view of the current icing environment (Figure 6-38). Icing severity...
Page 324 - Moderate; Softkey when Turbulence is selected for; Figure 6-41 Turbulence Legend
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 312 HAZARD AVOIDANCE TURBULENCE NOTE: Turbulence data cannot be displayed at the same time as NEXRAD data. Turbulence data (Figure 6-40) identifies the potential for erratic movement of high-altitude air mass associated winds. Turb...
Page 325 - Figure 6-42 AIREPs and PIREPs on the Weather Data Link (XM) Page
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 313 HAZARD AVOIDANCE PIREPS AND AIREPS Pilot Weather Reports (PIREPs) describe in-flight weather encountered by pilots. When significant weather conditions are reported or forecast, Air Traffic Control (ATC) facilities are required...
Page 326 - Decoded PIREP Text; are selected for display.
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 314 HAZARD AVOIDANCE Figure 6-43 PIREP Text on the Weather Data Link (XM) Page Decoded PIREP Text Raw PIREP Text Selected PIREP Age of report in HH:MM To display the PIREP or AIREP legend (Figure 6-44), press the LEGEND Softkey whe...
Page 327 - GFDS WORLDWIDE WEATHER; ACCESSING GFDS WORLDWIDE WEATHER PRODUCTS; Knob to select the Map Page Group.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 315 HAZARD AVOIDANCE 6.2 GFDS WORLDWIDE WEATHER NOTE: Garmin Flight Data Services Worldwide Weather provides information for avoiding hazardous weather. Do not utilize Worldwide Weather information to penetrate hazardous weather. N...
Page 328 - Refresh Rate
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 316 HAZARD AVOIDANCE Figure 6-45 GFDS Weather Data Link (GFDS) Page (After GFDS Weather Request) Weather product age information Precip Weather Product Display Enabled icon Precip Weather Product Selected for Display When a weather...
Page 329 - between 3 and 10 minutes to provide new data.; Table 6-3 GFDS Weather Product Symbols and Data Timing
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 317 HAZARD AVOIDANCE Weather Product Symbol Expiration Time (Minutes) Refresh Rate (Minutes) Radar Precipitation (PRECIP) 30 U.S.: 3* Canada: 3* † Europe: 15 Australia: 15ˆ Infrared Satellite (IR SAT) 60 30 Datalink Lightning (DL L...
Page 330 - GFDS Weather Product; METARs; Table 6-4 GFDS Weather Product Display Maps
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 318 HAZARD AVOIDANCE Table 6-4 shows which GFDS Weather products can be displayed (indicated with a ‘+’ symbol) on specific G1000H maps. GFDS Weather Product PFD Inset Map Navigation Map P age W eather Data Link (GFDS) P age W eath...
Page 333 - XM Weather Product; Table 6-5 Corresponding XM and GFDS Weather Products
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 321 HAZARD AVOIDANCE If both GFDS and XM weather services are installed, customizing the display settings for the corresponding weather products shown in Table 6-5 will result in identical settings for both services. XM Weather Pro...
Page 334 - Figure 6-50 Navigation Map Page Setup Menu
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 322 HAZARD AVOIDANCE Figure 6-50 Navigation Map Page Setup Menu Figure 6-49 Navigation Map Page Menu Figure 6-51 Navigation Map Page Setup Menu, Weather Group Each active weather product has an associated legend which can be displa...
Page 335 - Figure 6-52 Panning on the GFDS Data Link Page; GFDS WEATHER DATA REQUESTS; plan or waypoint is provided, respectively.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 323 HAZARD AVOIDANCE Figure 6-52 Panning on the GFDS Data Link Page Additional In- formation on TFR Selected with Map Pointer TFR Selected with Map Pointer GFDS WEATHER DATA REQUESTS The GFDS Data Request window provides the flight...
Page 336 - Figure 6-54 GFDS Data Request Window
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 324 HAZARD AVOIDANCE • DESTINATION – Requests data based on the active flight plan destination (Direct-To destinations excluded). See the Flight Management section for more information about entering and activating flight plans. • ...
Page 337 - Knob the data request will continue to process
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 325 HAZARD AVOIDANCE Figure 6-55 GFDS Weather Data Request Results with Precipitation and Infrared Satellite Displayed Present Position Selected, 200 nm Diameter Requested Destination Selected, 200 nm Diameter Requested Next 80 nm ...
Page 339 - WORLDWIDE WEATHER PRODUCTS; PRECIPITATION; Figure 6-56 Precipitation Data on the Weather Data Link (GFDS) Page
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 327 HAZARD AVOIDANCE WORLDWIDE WEATHER PRODUCTS PRECIPITATION Precipitation (PRECIP) data is not real-time. The lapsed time between collection, processing, and dissemination of radar images can be significant and may not reflect th...
Page 340 - Figure 6-57 Precipitation Data Legend; radars measure the reflectivity ratio, or the energy reflected; Radar images may have certain limitations:
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 328 HAZARD AVOIDANCE No Radar Coverage Figure 6-57 Precipitation Data Legend Boundary of GFDS weather data request The display of radar coverage is enabled when Precipitation is selected for display. Areas where precipitation radar...
Page 341 - Figure 6-58 Precipitation Data - Zoomed; Block represents; The following may cause abnormalities in displayed radar images:
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 329 HAZARD AVOIDANCE Figure 6-58 Precipitation Data - Zoomed Block represents 4 km 2 The following may cause abnormalities in displayed radar images: • Ground clutter • Strobes and spurious radar data • Sun strobes (when the radar ...
Page 342 - IR SAT; Softkey when Infrared Satellite data; Figure 6-60 Infrared Satellite Legend
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 330 HAZARD AVOIDANCE INFRARED SATELLITE Infrared Satellite (IR SAT) data (Figure 6-59) depicts cloud top temperatures from satellite imagery. Brighter cloud top colors indicate cooler temperatures occurring at higher altitudes. Fig...
Page 343 - Figure 6-61 Datalink Lightning; Lightning Strikes; Figure 6-62 Datalink Lightning Legend
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 331 HAZARD AVOIDANCE DATALINK LIGHTNING Datalink Lightning (DL LTNG) data (Figure 6-61) shows the approximate location of cloud-to-ground lightning strikes. A strike icon represents a strike that has occurred within a two-kilometer...
Page 344 - SIGMETs (SIGnificant METeorological Information); SIGMET; Knob and move the Map Pointer over the icon.; Figure 6-64 Sample SIGMET Text
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 332 HAZARD AVOIDANCE SIGMETS AND AIRMETS SIGMETs (SIGnificant METeorological Information) and AIRMETs (AIRmen’s METeorological Information) are issued for potentially hazardous weather. A Convective SIGMET is issued for hazardous c...
Page 345 - METARs are shown as colored flags at airports that provide them.; Figure 6-66 METAR Flags on the Weather Data Link (GFDS) Page; raw form when it is available.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 333 HAZARD AVOIDANCE METARS AND TAFS NOTE: METAR information is only displayed within the installed navigation database service area. METARs (METeorological Aerodrome Reports) typically contain information about the temperature, de...
Page 346 - Figure 6-67 METAR and TAF Text on the Weather Information Page
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 334 HAZARD AVOIDANCE 1) Select the Weather Information Page. a) Turn the large FMS Knob to select the Waypoint Page Group. b) Select the WX Softkey to select the Weather Information Page. 2) Press the FMS Knob to display the cursor...
Page 347 - when the METAR text does not contain adequate information.; Figure 6-68 METAR Legend; WINDS ALOFT; Softkey when Winds Aloft is; Figure 6-70 Winds Aloft Data with Legend
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 335 HAZARD AVOIDANCE The METAR flag color is determined by the information in the METAR text. A gray METAR flag is displayed when the METAR text does not contain adequate information. Figure 6-68 METAR Legend WINDS ALOFT Winds Alof...
Page 349 - Softkey when PIREPs or AIREPs
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 337 HAZARD AVOIDANCE Figure 6-72 PIREP Text on the Weather Data Link (GFDS) Page Decoded PIREP Text Raw PIREP Text To display the PIREP or AIREP legend (Figure 6-73) , select the LEGEND Softkey when PIREPs or AIREPs are selected fo...
Page 350 - ABNORMAL OPERATIONS; request status window.; Table 6-6 Abnormal GFDS Request Status Messages
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 338 HAZARD AVOIDANCE ABNORMAL OPERATIONS If the G1000H cannot complete a GFDS weather data request, one or more messages will appear in the request status window. Weather Request Status Message Desciption Auto requests inhibitedSen...
Page 351 - refer to Appendix A for more information.; GFDS WEATHER IN REVERSIONARY MODE
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 339 HAZARD AVOIDANCE The G1000H also displays message advisories on the PFD which may indicate a problem with the GDL 59H; refer to Appendix A for more information. GFDS WEATHER IN REVERSIONARY MODE When the G1000H is operating in ...
Page 352 - enhance situational awareness.
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 340 HAZARD AVOIDANCE 6.3 HTAWS WARNING: Do not use HTAWS information for primary terrain avoidance. HTAWS is intended only to enhance situational awareness. NOTE: The data contained in the HTAWS databases comes from government agen...
Page 353 - DISPLAYING HTAWS DATA; Figure 6-74 Terrain Altitude/Color Correlation for HTAWS; Table 6-8 HTAWS Potential Impact Point Symbols with Alert Types
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 341 HAZARD AVOIDANCE from the altimeter) to differ from the GSL altitude. This variation results in the aircraft’s GSL altitude differing from the baro-corrected altitude. DISPLAYING HTAWS DATA HTAWS uses yellow (caution) and red (...
Page 354 - HTAWS PAGE
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 342 HAZARD AVOIDANCE HTAWS PAGE The MAP - HTAWS Page is specialized to show terrain, obstacle, and potential impact point data in relation to the aircraft’s current altitude, without clutter from the basemap. It is the principal pa...
Page 356 - HTAWS ALERTS; • Press the; Figure 6-77 HTAWS Alert Annunciations
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 344 HAZARD AVOIDANCE HTAWS ALERTS Alerts are issued when flight conditions meet parameters that are set within HTAWS software algorithms. HTAWS alerts typically employ a CAUTION or a WARNING alert severity level, or both. When an a...
Page 357 - Alert Type; Table 6-9 HTAWS Alerts Summary; Reduced Required Obstacle Clearance (ROC)
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 345 HAZARD AVOIDANCE Alert Type PFD/HTAWS Page Alert Annunciation MFD Pop-Up Alert (except HTAWS Page) Aural Message Reduced Required Terrain Clearance Warning (RTC) “Warning; Terrain, Terrain” Imminent Terrain Impact Warning (ITI)...
Page 358 - Required; feet at less than 60 knots.; Figure 6-80 Reduced Protection Mode Enabled
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 346 HAZARD AVOIDANCE Imminent Terrain Impact (ITI) and Imminent Obstacle Impact (IOI) alerts are issued when the aircraft is below the elevation of a terrain or obstacle cell in the aircraft’s projected path. ITI and IOI alerts are...
Page 359 - Figure 6-81 HTAWS Alerting Disabled
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 347 HAZARD AVOIDANCE Enabling/Disabling RP Mode: 1) Turn the large FMS Knob to select the HTAWS Page. 2) Press the RP MODE Softkey to inhibit or enable RP Mode (choice dependent on current state). Or : 1) Press the MENU Key. 2) Tur...
Page 360 - A VCO alert consists of a aural message such as; Figure 6-82 Voice Callout Settings
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 348 HAZARD AVOIDANCE ALTITUDE VOICE CALLOUT (VCO) AURAL ALERTS HTAWS provides aural altitude advisory alerts as the aircraft descends. VCO alerts are based on either radar altitude (if a radar altimeter is installed and available) ...
Page 361 - SYSTEM STATUS; HTAWS TEST; * Aural message not issued if HTAWS is inhibited.; Table 6-10 HTAWS System Status Annunciations; Manually testing the HTAWS System:; Select the HTAWS Page.; Select ‘Test HTAWS System’ and press the; Key to confirm the selection.; Figure 6-83 HTAWS Page Menu; “HTAWS Failure”
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 349 HAZARD AVOIDANCE SYSTEM STATUS During system power-up, HTAWS conducts a system-test of its aural and visual annunciations. The system test can also be manually initiated. An aural alert is issued at test completion. HTAWS Syste...
Page 362 - “HTAWS; Table 6-11 HTAWS Abnormal Conditions
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 350 HAZARD AVOIDANCE ‘HTAWS N/A’ is generated in the annunciation window and on the HTAWS Page. The aural message “HTAWS Not Available” is also generated. When sufficient GPS signal is received and the aircraft is within the databa...
Page 363 - WARNING; TIS is disabled if a Traffic Advisory System (TAS) is installed.; Traffic Advisory Off Scale; Table 6-12 TIS Traffic Symbols
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 351 HAZARD AVOIDANCE 6.4 TRAFFIC INFORMATION SERVICE (TIS) WARNING : The Traffic Information Service (TIS) is intended for advisory use only. TIS is intended to help the pilot locate traffic visually. It is the responsibility of th...
Page 364 - DISPLAYING TRAFFIC DATA; MAP; Figure 6-84 TIS Traffic on the Navigation Map Page
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 352 HAZARD AVOIDANCE DISPLAYING TRAFFIC DATA Traffic information can be displayed on the following maps (when TIS is operating): • PFD Inset Map • Navigation Map Page • Traffic Map Page • Trip Planning Page • Nearest Pages • Active...
Page 365 - Figure 6-86 Navigation Map Page Setup Menu
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 353 HAZARD AVOIDANCE Customizing traffic display on the Navigation Map Page: 1) Select the Navigation Map Page. 2) Press the MENU Key. 3) With ‘Map Setup’ highlighted, press the ENT Key (Figure 6-85). 4) Turn the small FMS Knob to ...
Page 366 - TRAFFIC MAP PAGE; with the; Figure 6-88 Traffic Map Page
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 354 HAZARD AVOIDANCE The Navigation Map Page Setup Menu provides a means in addition to the softkey for enabling/disabling display of traffic. The setup menu also controls the map range settings above which traffic data (symbols an...
Page 367 - TIS ALERTS; “Traffic”; Inset Map; “TIS Not Available”; Muting the “TIS Not Available” voice alert:; Select the Traffic Map Page.; TNA MUTE
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 355 HAZARD AVOIDANCE TIS ALERTS When the number of TAs on the Traffic Map Page increases from one scan to the next, the following occur: • A single “Traffic” voice alert is generated. • A ‘TRAFFIC’ Annunciation appears to the top l...
Page 368 - Traffic Map Page; Data is not being received from the transponder*; DATA FAILED; The transponder has failed*; UNAVAILABLE; TIS is unavailable or out of range; * Contact a service center or Garmin dealer for corrective action; Table 6-13 TIS Failure Annunciations; Data Not Received
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 356 HAZARD AVOIDANCE Or : a) Press the MENU Key. b) Select ‘‘’Not Available” Mute On’ (shown if TNA muting is currently off) and press the ENT Key. SYSTEM STATUS The G1000H performs an automatic test of TIS during power-up. If TIS ...
Page 369 - TIS Operating; OPERATING; TIS Standby; STANDBY; * See Table 6-15 for additional failure annunciations; Table 6-14 TIS Modes; Traffic data has failed; *Shown as symbol on Traffic Map Page; Table 6-15 TIS Traffic Status Annunciations
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 357 HAZARD AVOIDANCE Mode Traffic Mode Annunciation (Traffic Map Page) Traffic Display Enabled Icon (Other Maps) TIS Operating OPERATING TIS Standby STANDBY (also shown in white in center of page) TIS Failed* FAIL * See Table 6-15 ...
Page 370 - GARMIN GTS TRAFFIC; TIS is disabled when TAS is installed.; THEORY OF OPERATION; TAS SURVEILLANCE VOLUME
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 358 HAZARD AVOIDANCE 6.5 GARMIN GTS TRAFFIC WARNING: The Garmin GTS 800 Traffic Advisory System (TAS) is intended for advisory use only to aid the pilot in visually acquiring traffic. No avoidance maneuvers should be based solely u...
Page 371 - Symbol; Traffic Advisory without ADS-B directional information.; that is neither a TA or PA.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 359 HAZARD AVOIDANCE When paired with a 1090 MHz extended squitter transponder, the GTS 800 uses Automatic Dependent Surveillance - Broadcast (ADS-B) data from participating airborne aircraft transponders to enhance the positional ...
Page 372 - traffic with an upward or downward-pointing arrow respectively.; Relative Altitude; Figure 6-91 Intruder Altitude and Vertical Trend Arrow; Vector Line indicates; Figure 6-92 Intruder Traffic with ADS-B Directional; either of the following conditions:; TA ALERTING CONDITIONS
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 360 HAZARD AVOIDANCE A vertical trend arrow to the right of the intruder symbol (Figure 6-91) indicates climbing or descending traffic with an upward or downward-pointing arrow respectively. Relative Altitude Vertical trend arrow F...
Page 373 - Sensitivity; Yes; Table 6-17 TA Sensitivity Level and TA Alerting Criteria; TAS ALERTS; When the traffic system detects a new TA, the following occur:
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 361 HAZARD AVOIDANCE Sensitivity Level Intruder Altitude Available TA Alerting Conditions A Yes Intruder closing rate provides less than 20 seconds of vertical and horizontal separation.Or:Intruder closing rate provides less than 2...
Page 374 - Bearing; Table 6-18 TA Descriptive Voice Announcements; TA MUTE; button on the; SYSTEM TEST; “TAS System Test Passed”; Testing the traffic system:; Knob to select the Traffic Map Page.
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 362 HAZARD AVOIDANCE A TA will be displayed for at least eight seconds, even if the condition(s) that initially triggered the TA are no longer present. Figure 6-93 Traffic Annunciation (PFD) Inset Map Displays When TA is Detected B...
Page 375 - Figure 6-94 System Test in Progress with Test Pattern; OPERATION; be displayed and for TAs to be issued.; OPERATE; necessary. Selecting the; Softkey forces the unit into Standby Mode.; knob
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 363 HAZARD AVOIDANCE 3) Turn the Range knob to set the range to 2/6 nm to allow for the full test pattern to be displayed. 4) Select the TEST Softkey. Or:1) Press the MENU Key and turn the small FMS knob to select ‘Test Mode’. 2) P...
Page 376 - as indicated by the map range rings.; Figure 6-95 Traffic Map Page
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 364 HAZARD AVOIDANCE Switching from standby mode to operating mode: O n the Traffic Page, select the OPERATE Softkey Or:1) Press the MENU Key and turn the small FMS knob to select ‘Operate Mode’. 2) Press the ENT Key. The system sw...
Page 377 - occurring outside of these limits will always be shown.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 365 HAZARD AVOIDANCE a ltitUDe D isPlay The pilot can select the volume of airspace in which non-threat and proximity traffic is displayed. TAs occurring outside of these limits will always be shown. Changing the altitude range: 1)...
Page 378 - iD D; Figure 6-96 Traffic Map Page with Flight IDs Enabled; Flight ID
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 366 HAZARD AVOIDANCE F light iD D isPlay The Flight IDs of other aircraft (when available) can be enabled for display on the Traffic Map Page (Figure 6-96). When a flight ID is received, it will appear above or below the correspond...
Page 379 - On; Figure 6-97 Traffic Map Page Menu; from 2 to 12 nm, as indicated by the map range rings.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 367 HAZARD AVOIDANCE Enabling/Disabling Flight ID Display: On the Traffic Map Page, select the FLT ID Softkey. Or : 1) Press the MENU Key. 2) Turn the small FMS Knob to select ‘Show Flight IDs’ or ‘Hide Flight IDs’ (choice dependen...
Page 380 - Figure 6-98 TAS Traffic on Navigation Map
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 368 HAZARD AVOIDANCE ADDITIONAL TRAFFIC DISPLAYS Traffic information can be displayed on the following maps on the MFD when the unit is operating: • Navigation Map Page • Traffic Map Page • Trip Planning Page • Nearest Pages • Acti...
Page 381 - Figure 6-100 Navigation Map Page Setup Menu
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 369 HAZARD AVOIDANCE Customizing the traffic display on the Navigation Map Page: 1) Select the Navigation Map Page. 2) Press the MENU Key. 3) With Map Setup highlighted, press the ENT Key (Figure 6-99). 4) Turn the small FMS Knob t...
Page 382 - Softkey. A traffic map; TRAFFIC; Select the softkey again to remove traffic data.; TEST; Operating; Standby; Traffic System Failed*; FAIL; * See Table 6-20 for additional failure annunciations; Table 6-19 Traffic Modes; NO DATA; Data is not being received from the traffic unit; Table 6-20 Traffic Failure Annunciations
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 370 HAZARD AVOIDANCE The Navigation Map Page Setup Menu also controls the display of traffic. The setup menu controls the map range settings. Traffic data symbols and labels can be decluttered from the display. If a map range large...
Page 383 - maps on which traffic can be displayed.; Table 6-21 Traffic Status Annunciations
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 371 HAZARD AVOIDANCE The annunciations to indicate the status of traffic information appear in a banner at the lower left corner of maps on which traffic can be displayed. Traffic Status Banner Annunciation Description TA OFF SCALE...
Page 385 - AUTOMATIC FLIGHT CONTROL SYSTEM
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 373 AUTOMATIC FLIGHT CONTROL SYSTEM SECTION 7 AUTOMATIC FLIGHT CONTROL SYSTEM Not available.
Page 387 - ADDITIONAL FEATURES; SECTION 8 ADDITIONAL FEATURES; carry another source of charts on board the aircraft.; system; • ChartView and FliteCharts
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 375 ADDITIONAL FEATURES SECTION 8 ADDITIONAL FEATURES NOTE: With the availability of SafeTaxi, ChartView, or FliteCharts in electronic form, it is still advisable to carry another source of charts on board the aircraft. Additional ...
Page 389 - Figure 8-1 Synthetic Vision Imagery; SVS OPERATION
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 377 ADDITIONAL FEATURES Figure 8-1 Synthetic Vision Imagery SVS OPERATION SVS is activated from the PFD using the softkeys located along the bottom edge of the display. Pressing the softkeys turns the related function on or off. Wh...
Page 390 - Figure 8-2 SVS Softkeys
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 378 ADDITIONAL FEATURES Figure 8-2 SVS Softkeys Pressing the BACK Softkey returns to the top-level softkeys. BACK BACK PFD Pressing the BACK Softkey returns to the previous level of softkeys. SYN VIS PATHWAY SYN TERR HRZN HDG APTSI...
Page 391 - SVS FEATURES; Figure 8-3 SVS on the Primary Flight Display; PATHWAYS
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 379 ADDITIONAL FEATURES SVS FEATURES Figure 8-3 SVS on the Primary Flight Display SVS Softkeys Synthetic Terrain Pathways Flight Path Marker Airport Runway Zero Pitch Line (ZPL) with Compass Heading Marks Airplane Symbol Selected A...
Page 392 - Figure 8-4 Programmed and Selected Altitude; Selected; PATHWAY
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 380 ADDITIONAL FEATURES Figure 8-4 Programmed and Selected Altitude Selected Altitude Programmed Altitudes Pathways provide supplemental glidepath/glideslope information on an active ILS, LPV, LNAV/VNAV, and some LNAV approaches. P...
Page 393 - Figure 8-5 SVS Pathways, Enroute and Descent
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 381 ADDITIONAL FEATURES D escent anD a PPROach Pathways are shown descending only for a programmed descent (Figures 8-5, 8-6). When the flight plan includes programmed descent segments, pathways are displayed along the descent path...
Page 395 - Flight Path; Figure 8-7 Flight Path Marker and Pathways; ZERO PITCH LINE
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 383 ADDITIONAL FEATURES FLIGHT PATH MARKER NOTE: The Flight Path Marker is not available when the cross-pointer (X-Pointer) flight director format is selected. The Flight Path Marker (FPM), also known as a Velocity Vector, is displ...
Page 396 - HRZN HDG; APTSIGNS; Figure 8-8 Airport Signs
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 384 ADDITIONAL FEATURES HORIZON HEADING The Horizon Heading is synchronized with the HSI and shows approximately 60 degrees of compass heading in 30-degree increments on the Zero Pitch Line. Horizon heading tick marks and digits ap...
Page 397 - Figure 8-9 Airport Runways
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 385 ADDITIONAL FEATURES RUNWAYS WARNING: Do not use SVS runway depiction as the sole means for determining the proximity of the aircraft to the runway or for maintaining the proper approach path angle during landing. NOTE: Not all ...
Page 398 - Figure 8-10 Terrain Alert; Terrain
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 386 ADDITIONAL FEATURES HTAWS ALERTING Terrain alerting on the synthetic terrain display is triggered by Forward-looking Terrain Avoidance (FLTA). When an obstacle becomes a potential impact point the color of the obstacle matches ...
Page 399 - Figure 8-11 Obstacle; Obstacle
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 387 ADDITIONAL FEATURES Obstacles are represented on the synthetic terrain display by standard two-dimensional tower symbols as found on MFD HTAWS Page and charts. Obstacle symbols appear in the perspective view with relative heigh...
Page 400 - FIELD OF VIEW; Figure 8-12 Option Menus; Navigation Map Page OPTIONS Menu
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 388 ADDITIONAL FEATURES FIELD OF VIEW The PFD field of view can be represented on the MFD Navigation Map Page. Two dashed lines forming a V-shape in front of the aircraft symbol on the map, represent the forward viewing area shown ...
Page 401 - Figure 8-13 PFD and MFD Field of View Comparison
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 389 ADDITIONAL FEATURES The following figure compares the PFD forward looking depiction with the MFD plan view and FIELD OF VIEW turned on. Figure 8-13 PFD and MFD Field of View Comparison Lines Depict PFD Field of View SVS View on...
Page 403 - Figure 8-14 SafeTaxi Depiction on the Navigation Map Page
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 391 ADDITIONAL FEATURES Figure 8-14 SafeTaxi Depiction on the Navigation Map Page DCLTR Softkey Removes Taxiway Markings Airport Features Aircraft Position Taxiway Identification Airport Hot Spot Outline The DCLTR Softkey (declutte...
Page 404 - Figure 8-15 Navigation Map PAGE MENU, Map Setup Option; SAFETAXI; Figure 8-16 MAP SETUP Menu, Aviation Group, SAFETAXI Range Options; SafeTaxi
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 392 ADDITIONAL FEATURES Configuring SafeTaxi range: 1) While viewing the Navigation Map Page, press the MENU Key to display the PAGE MENU. 2) Turn the large FMS Knob to highlight the Map Setup Menu Option and press the ENT Key. Fig...
Page 405 - SafeTaxi Database; Power-up Page Display; SafeTaxi database has expired.; Table 8-1 SafeTaxi Annunciation Definitions; on the; MFD1 DB; information by turning the; Knob or pressing the; Key until the SafeTaxi database information is
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 393 ADDITIONAL FEATURES SafeTaxi database is revised every 56 days. SafeTaxi is always available for use after the expiration date. When turning on the system, the Power-up Page indicates whether the databases are current, out of d...
Page 406 - S – Indicates the data is for SafeTaxi; Figure 8-18 AUX – System Status Page, SafeTaxi Current Information; SafeTaxi Data; Softkey a second time. The softkey label will change to; PFD1 DB; Knob or pressing the; Key until the SafeTaxi database information is shown.
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 394 ADDITIONAL FEATURES The SafeTaxi database cycle number shown in the figure, 10S5, is deciphered as follows: 10 – Indicates the year 2010 S – Indicates the data is for SafeTaxi 5 – Indicates the fifth issue of the SafeTaxi datab...
Page 407 - Current Date is before Effective Date
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 395 ADDITIONAL FEATURES Figure 8-19 illustrates possible SafeTaxi database conditions that may appear on the AUX - System Status Page. The EFFECTIVE date is the beginning date for this database cycle. If the present date is before ...
Page 408 - CHARTVIEW SOFTKEYS
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 396 ADDITIONAL FEATURES 8.3 CHARTVIEW ChartView is an optional feature resembling the paper version of Jeppesen terminal procedures charts. The charts are displayed in full color with high-resolution. The MFD depiction shows the ai...
Page 409 - TERMINAL PROCEDURES CHARTS; Figure 8-21 Option Menus; UNABLE TO DISPLAY CHART is then displayed.; Figure 8-23 Unable To Display Chart Banner
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 397 ADDITIONAL FEATURES TERMINAL PROCEDURES CHARTS Selecting Terminal Procedures Charts: While viewing the Navigation Map Page, Nearest Airport Page, or Flight Plan Page, select the SHW CHRT Softkey. Or : 1) Press the MENU Key to d...
Page 410 - When a chart is not available by selecting the; Softkey or selecting a Page Menu Option, charts; Softkey displays the chart for the nearest airport, if available.; Figure 8-24 Approach Information Page, Chart Selection
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 398 ADDITIONAL FEATURES When a chart is not available by selecting the SHW CHRT Softkey or selecting a Page Menu Option, charts may be obtained for other airports from the WPT Pages or Flight Plan Pages. If a chart is available for...
Page 411 - While the APPROACH Box is selected using the; Knob, the G1000H softkeys are blank. Once the; centers the chart on the screen.; Softkey switches between the DeKalb Peachtree (KPDK) Airport; Figure 8-25 CHRT Softkey, Airport Information Page; Select; CHRT
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 399 ADDITIONAL FEATURES While the APPROACH Box is selected using the FMS Knob, the G1000H softkeys are blank. Once the desired chart is selected, the chart scale can be changed and the chart page can be scrolled using the Joystick ...
Page 412 - Aircraft; Figure 8-26 Airport Information Page, INFO View, Full Screen Width
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 400 ADDITIONAL FEATURES Selecting the INFO-1 or INFO-2 Softkey returns to the airport diagram chart when the view is on a terminal procedure chart. If the displayed chart is the airport diagram chart, selecting the INFO-1 or INFO-2...
Page 413 - Key displays the; Softkey displays the Departure Procedure Chart if available.; Figure 8-28 Departure Information Page; Chart Not
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 401 ADDITIONAL FEATURES In the example shown in Figure 8-26, the Class B Chart is selected. Pressing the ENT Key displays the Charlotte Class B Airspace Chart (Figure 8-27). Figure 8-27 Airport Information Page, Class B Chart Selec...
Page 414 - STAR; APR; Softkey displays the approach chart for the airport if available.; Figure 8-30 Approach Information Page
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 402 ADDITIONAL FEATURES Selecting the STAR Softkey displays the Standard Terminal Arrival Chart if available. Change Range and Scroll Through the Chart With the Joystick Figure 8-29 Arrival Information Page Chart Not To Scale Aircr...
Page 415 - WX; Figure 8-31 Weather Information Page; A subdued softkey label indicates the function is disabled.; are not available, the; NOTAM
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 403 ADDITIONAL FEATURES Selecting the WX Softkey shows the airport weather frequency information, and includes weather data such as METAR and TAF from the XM Data Link Receiver, when available. Weather information is available only...
Page 416 - Figure 8-32 NOTAM Softkey Highlighted; Softkey again removes the NOTAMS information.
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 404 ADDITIONAL FEATURES Figure 8-32 NOTAM Softkey Highlighted NOTAM Softkey Appears for Selected Airports Figure 8-33 Airport Information Page, Local NOTAMs Local NOTAM on This Airport NOTAM Softkey Selected Selecting the NOTAM Sof...
Page 417 - CHART OPTIONS; CHRT OPT; ALL; Softkey shows the complete approach chart on the screen.; Figure 8-34 Approach Information Page, ALL View; Complete
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 405 ADDITIONAL FEATURES CHART OPTIONS Selecting the CHRT OPT Softkey displays the next level of softkeys, the chart options level (Figure 8-20). Selecting the ALL Softkey shows the complete approach chart on the screen. Figure 8-34...
Page 418 - HEADER; Figure 8-35 Approach Information Page, Header View; PLAN; Softkey shows the approach chart two dimensional plan view.; Figure 8-36 Approach Information Page, Plan View
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 406 ADDITIONAL FEATURES Selecting the HEADER Softkey shows the header view (approach chart briefing strip) on the screen. Approach Chart Briefing Strip Figure 8-35 Approach Information Page, Header View Selecting the PLAN Softkey s...
Page 419 - PROFILE; Softkey displays the approach chart descent profile strip.; MINIMUMS
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 407 ADDITIONAL FEATURES Selecting the PROFILE Softkey displays the approach chart descent profile strip. Approach Chart Descent Profile Strip Figure 8-37 Approach Information Page, Profile View, Full Screen Width Selecting the MINI...
Page 420 - FIT WIDTH; FIT WDTH; Softkey to Show; Figure 8-39 Airport Information Page, FIT WDTH Softkey Selected
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 408 ADDITIONAL FEATURES If the chart scale has been adjusted to view a small area of the chart, selecting the FIT WIDTH Softkey changes the chart size to fit the available screen width. Select FIT WDTH Softkey to Show Full Chart Wi...
Page 421 - FULL SCN; Figure 8-40 Airport Information Page, Full Screen and Info Window
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 409 ADDITIONAL FEATURES Selecting the FULL SCN Softkey alternates between removing and replacing the data window to the right. Selecting Additional Information: 1) While viewing the Airport Taxi Diagram, select the FULL SCN Softkey...
Page 422 - Figure 8-41 Page Menus; Full Screen On/Off Selection
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 410 ADDITIONAL FEATURES The full screen view can also be selected by using the page menu option. Selecting full screen On or Off: 1) While viewing a terminal chart press the MENU Key to display the Page Menu OPTIONS. 2) Turn the la...
Page 423 - Figure 8-42 Waypoint Information Page, OPTIONS Menu
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 411 ADDITIONAL FEATURES DAY/NIGHT VIEW ChartView can be displayed on a white or black background for day or night viewing. The Day View offers a better presentation in a bright environment. The Night View gives a better presentatio...
Page 424 - Figure 8-43 Arrival Information Page, Day View
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 412 ADDITIONAL FEATURES Figure 8-43 Arrival Information Page, Day View Figure 8-44 Arrival Information Page, Night View
Page 425 - CHARTVIEW CYCLE NUMBER AND EXPIRATION DATE; ChartView Database; Table 8-2 ChartView Power-up Page Annunciations and Definitions
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 413 ADDITIONAL FEATURES CHARTVIEW CYCLE NUMBER AND EXPIRATION DATE ChartView database is revised every 14 days. Charts are still viewable during a period that extends from the cycle expiration date to the disables date. ChartView i...
Page 426 - information by turning the; Key until the ChartView database information is; ChartView; Appendix B for instructions on revising the ChartView database.
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 414 ADDITIONAL FEATURES The ChartView time critical information can also be found on the AUX - System Status page. The database CYCLE number, EXPIRES, and DISABLES dates of the ChartView subscription appear in either blue or yellow...
Page 427 - ChartView Database is Disabled
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 415 ADDITIONAL FEATURES Other possible AUX - System Status page conditions are shown in Figure 8-47. The EXPIRES date is the revision date for the next database cycle. The DISABLES date is the date that this database cycle is no lo...
Page 428 - FLITECHARTS SOFTKEYS
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 416 ADDITIONAL FEATURES 8.4 FLITECHARTS FliteCharts is an optional feature resembling the paper version of AeroNav Services terminal procedures charts. The charts are displayed with high-resolution and in color for applicable chart...
Page 429 - Figure 8-49 Option Menus; Figure 8-50 Chart Not Available Banner; Figure 8-51 Unable To Display Chart Banner
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 417 ADDITIONAL FEATURES TERMINAL PROCEDURES CHARTS Selecting Terminal Procedures Charts: While viewing the Navigation Map Page, Nearest Airport Page, or Flight Plan Page, select the SHW CHRT Softkey. Or : 1) Press the MENU Key to d...
Page 431 - Figure 8-53 CHRT Softkey, Airport Information Page
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 419 ADDITIONAL FEATURES While the APPROACH Box is selected using the FMS Knob, the G1000H softkeys are blank. Once the desired chart is selected, the chart scale can be changed and the chart can be panned using the Joystick . Press...
Page 432 - Info Box
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 420 ADDITIONAL FEATURES Selecting the INFO-1 or INFO-2 Softkey returns to the airport diagram chart when the view is on a terminal procedure chart. If the displayed chart is the airport diagram chart, selecting the INFO-1 or INFO-2...
Page 433 - Key displays the; Figure 8-56 Departure Information Page
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 421 ADDITIONAL FEATURES In the example shown in Figure 8-54, TAKE OFF MINIMUMS is selected. Pressing the ENT Key displays the Take-off Minimums and Departure Procedures Chart (Figure 8-55). Figure 8-55 Airport Information Page, TAK...
Page 434 - Figure 8-57 Arrival Information Page; Figure 8-58 Approach Information Page
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 422 ADDITIONAL FEATURES Selecting the STAR Softkey displays the Standard Terminal Arrival Chart if available. Figure 8-57 Arrival Information Page Selecting the APR Softkey displays the approach chart for the airport if available. ...
Page 435 - Figure 8-59 Weather Information Page, WX Softkey Selected
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 423 ADDITIONAL FEATURES Selecting the WX Softkey shows the airport weather frequency information, when available, and includes weather data such as METAR and TAF from the XM Data Link Receiver. Weather information is available only...
Page 436 - Softkey shows the complete chart on the screen.; Figure 8-60 Airport Information Page, ALL View Selected
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 424 ADDITIONAL FEATURES CHART OPTIONS Selecting the CHRT OPT Softkey displays the next level of softkeys, the chart options level (Figure 8-48). Selecting the ALL Softkey shows the complete chart on the screen. Complete Chart Shown...
Page 437 - Figure 8-61 Approach Information Page, FIT WDTH Softkey Selected
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 425 ADDITIONAL FEATURES Selecting the FIT WIDTH Softkey fits the width of the chart in the display viewing area. In the example shown, the chart at close range is replaced with the full width chart. Figure 8-61 Approach Information...
Page 438 - Softkey to Switch; Figure 8-62 Airport Information Page, Full Screen and Info Window
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 426 ADDITIONAL FEATURES Selecting the FULL SCN Softkey alternates between removing and replacing the data window to the right. Select FULL SCN Softkey to Switch Between Chart on Full Screen and Chart with Info Window Figure 8-62 Ai...
Page 439 - Figure 8-63 Page Menus
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 427 ADDITIONAL FEATURES The full screen view can also be selected by using the page menu option. Selecting full screen On or Off: 1) While viewing a terminal chart press the MENU Key to display the Page Menu OPTIONS. 2) Turn the la...
Page 440 - Figure 8-64 Waypoint Information Page, OPTIONS Menu
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 428 ADDITIONAL FEATURES DAY/NIGHT VIEW FliteCharts can be displayed on a white or black background for day or night viewing. The Day View offers a better presentation in a bright environment. The Night View gives a better presentat...
Page 441 - Figure 8-65 Approach Information Page, Day View
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 429 ADDITIONAL FEATURES Figure 8-65 Approach Information Page, Day View Figure 8-66 Approach Information Page, Night View
Page 442 - FLITECHARTS CYCLE NUMBER AND EXPIRATION DATE; FliteCharts Database
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 430 ADDITIONAL FEATURES FLITECHARTS CYCLE NUMBER AND EXPIRATION DATE FliteCharts data is revised every 28 days. Charts are still viewable during a period that extends from the cycle expiration date to the disables date. FliteCharts...
Page 443 - Key until the FliteCharts database information is; FliteCharts
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 431 ADDITIONAL FEATURES When the 180 day grace period has expired, ‘Chart data is disabled.’ in yellow indicates that the FliteCharts database has expired and is no longer viewable. ‘Chart Data: N/A’ appears in white if no FliteCha...
Page 444 - instructions on revising the FliteCharts database.; FliteCharts Expired, but is not Disabled
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 432 ADDITIONAL FEATURES The FliteCharts database is provided from Garmin. Refer to Updating Garmin Databases in Appendix B for instructions on revising the FliteCharts database. The other three possible AUX - System Status page con...
Page 445 - AOPA AIRPORT DIRECTORY; Selecting the Airport Directory Page:; Figure 8-70 AOPA Information on the Airport Information Page
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 433 ADDITIONAL FEATURES 8.5 AOPA AIRPORT DIRECTORY The Aircraft Owners and Pilots Association (AOPA) Airport Directory database offers detailed information regarding services, hours of operation, lodging options, and more. This inf...
Page 446 - AOPA DATABASE CYCLE NUMBER AND REVISION; AOPA Database; Database card contains no AOPA Airport Directory data.; Table 8-4 Airport Directory Annunciation Definitions
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 434 ADDITIONAL FEATURES AOPA DATABASE CYCLE NUMBER AND REVISION The AOPA Airport Directory database is revised four times per year. Check fly.garmin.com for the current database. The Airport Directory is always available for use af...
Page 447 - Airport Directory database information; Airport Directory
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 435 ADDITIONAL FEATURES The Airport Directory Region, Version, Cycle, Effective date and Expires date of the database cycle can also be found on the AUX - System Status page, as seen in Figure 8-72. Select the MFD1 DB Softkey to pl...
Page 448 - SATELLITE TELEPHONE AND DATA LINK SERVICES; REGISTERING WITH GARMIN FLIGHT DATA SERVICES; Satellite System for telephone,
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 436 ADDITIONAL FEATURES 8.6 SATELLITE TELEPHONE AND DATA LINK SERVICES NOTE : Separate accounts must be established to access the Iridium satellite network for voice and Garmin Flight Data Services for data transmission of maintena...
Page 449 - Key. The Page Menu window is now displayed as seen in Figure 8-74.; Figure 8-74 Select Register With GFDS
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 437 ADDITIONAL FEATURES Figure 8-73 Report Status Page Selected Prior to System Registration 5) Press the MENU Key. The Page Menu window is now displayed as seen in Figure 8-74. 6) Select ‘Register With GFDS’ in the menu list. Figu...
Page 450 - Figure 8-75 Enter Access Code; Enter the Access Code provided by Garmin Flight Data Services.
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 438 ADDITIONAL FEATURES 7) Press the ENT Key. The Garmin Flight Data Service Registration window is now displayed as shown in Figure 8-75. Figure 8-75 Enter Access Code 8) Enter the Access Code provided by Garmin Flight Data Servic...
Page 451 - DISABLE/ENABLE IRIDIUM TRANSCEIVER; Figure 8-76 Report Status Page
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 439 ADDITIONAL FEATURES DISABLE/ENABLE IRIDIUM TRANSCEIVER Iridium telephone and data communications may be turned on or off by performing these simple steps. Disabling/enabling telephone and low speed data services: 1) Turn the la...
Page 452 - TELEPHONE COMMUNICATION; To view the Telephone Page:; Knob on the MFD to select the AUX page group.; Figure 8-78 Phone Status Display
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 440 ADDITIONAL FEATURES TELEPHONE COMMUNICATION The pilot or copilot can place and answer calls on the Iridium satellite network. Control and monitoring of telephone functions are accomplished through the AUX-TELEPHONE Page. To vie...
Page 453 - Internal; Table 8-5 Telephone Symbols
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 441 ADDITIONAL FEATURES Internal Phone External Phone Description Phone is Idle Phone is ringing Phone has a dial tone (off hook) or connected to another phone Phone dialed is busy Phone is dialing another phone Phone has failed Ph...
Page 454 - Iridium Telephone System.; Figure 8-79 Incoming Call; Incoming Call Symbol on MFD Page; selecting the; IGNORE; IGNRE ALL; calls and leave the current call unanswered. Selecting the; TEL; Softkey will display the AUX-TELEPHONE
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 442 ADDITIONAL FEATURES INCOMING CALLS NOTE: Outside callers should dial 00 + 8816 or 8817 + aircraft phone number when calling the aircraft Iridium Telephone System. When viewing MFD pages other than the AUX-TELEPHONE Page, a pop-...
Page 455 - Figure 8-80 Initiating an External Call
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 443 ADDITIONAL FEATURES Disabling incoming call alerts: 1) With the AUX-TELEPHONE Page displayed, press the MENU Key on the MFD to display the Page Menu. 2) Turn either FMS Knob to place the cursor on ‘Disable Incoming Call Alerts’...
Page 456 - Figure 8-82 Make the Call; Figure 8-83 System is Making the Connection
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 444 ADDITIONAL FEATURES 4) Press the ENT Key. ‘OK’ is highlighted as in Figure 8-82. Figure 8-82 Make the Call 5) Press the ENT Key. The system will begin calling the number, as in Figure 8-83. Figure 8-83 System is Making the Conn...
Page 457 - HANGUP; Figure 8-84 Phone is Answered, Connection Complete
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 445 ADDITIONAL FEATURES When the phone is answered, the connection is established as shown in Figure 8-84. To exit the call, select the HANGUP Softkey. Figure 8-84 Phone is Answered, Connection Complete
Page 458 - HOLD; Softkey again to resume; Figure 8-85 Cockpit Phone on Hold
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 446 ADDITIONAL FEATURES PLACING THE CALL ON HOLD To place a call on hold: Select the HOLD Softkey on the MFD. Or : 1) Press the MENU Key to display the Page Menu. 2) Turn either FMS Knob to place the cursor on ‘Put Current Call On ...
Page 459 - The pilot or copilot can send and receive; Viewing the Text Messaging Page:; Knob to select the SATELLITE PHONE.; SMS; Figure 8-86 Text Messaging Page
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 447 ADDITIONAL FEATURES TEXT MESSAGING (SMS) The pilot or copilot can send and receive text messages on the Iridium satellite network. Messages may be sent to an email address or text message capable cellular telephone. Message len...
Page 460 - Message Symbol; Table 8-6 Text Message Symbols; VIEWING A TEXT MESSAGE WHEN RECEIVED; -87 will be displayed when a new text message is received.; Figure 8-87 New Text Message Received; New Text Message Pop-up; VIEW; IGNR ALL; Softkey will extinguish; Softkey will display the
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 448 ADDITIONAL FEATURES Message Symbol Description Received text message that has not been opened Received text message that has been opened Saved text message, draft not sent System is sending text message Text message has been se...
Page 461 - Figure 8-88 Text Message Displayed from Pop-Up Alert; The pop-up alerts may be enabled or disabled through the Page Menu.; Key on the MFD to display the Page Menu.; Figure 8-89 Disabling New Text Message Pop-Ups
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 449 ADDITIONAL FEATURES Figure 8-88 Text Message Displayed from Pop-Up Alert The pop-up alerts may be enabled or disabled through the Page Menu. Enabling/disabling incoming text message pop-up alerts: 1) With the AUX-TEXT MESSAGING...
Page 462 - After reading a text message, a reply may be sent.; SENDING A TEXT MESSAGE; Text messages may be sent from the AUX-TEXT MESSAGING Page.; Figure 8-90 Composing a New Text Message
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 450 ADDITIONAL FEATURES REPLY TO A TEXT MESSAGE After reading a text message, a reply may be sent. Replying to a text message: While viewing the text message, select the REPLY Softkey. Or : 1) Press the MENU Key to display the Page...
Page 463 - Figure 8-91 Creating/Editing Predefined Messages
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 451 ADDITIONAL FEATURES 2) The TEXT MESSAGE DRAFT Window is now displayed with the cursor in the ‘TO’ field. Enter 00 + country code + area code + phone number when sending to a text capable telephone. An email address may also be ...
Page 464 - Figure 8-92 Composing a Predefined Message
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 452 ADDITIONAL FEATURES Or : a) Press the MENU Key to display the Page Menu. b) Turn either FMS Knob to place the cursor on ‘Draft New Predefined Message’. c) Press the ENT Key. The PREDEFINED SMS TEXT MESSAGE Window is now display...
Page 465 - Figure 8-93 Composing a New Text Message
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 453 ADDITIONAL FEATURES Sending a predefined text message: 1) While viewing the AUX-TEXT MESSAGING Page, select the NEW Softkey. 2) The TEXT MESSAGE DRAFT Window is now displayed with the cursor in the ‘TO’ field. Enter the desired...
Page 466 - Figure 8-94 Predefined Message List; TEXT MESSAGE BOXES
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 454 ADDITIONAL FEATURES 4) Select the PREDEFD Softkey. The PREDEFINED MESSAGE MENU Window is displayed as seen in Figure 8-94. Figure 8-94 Predefined Message List 5) Turn either FMS Knob to select the desired predefined message. 6)...
Page 467 - Figure 8-95 Text Message Inbox
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 455 ADDITIONAL FEATURES Figure 8-95 Text Message Inbox Show Outbox messages: While viewing the AUX-TEXT MESSAGING Page, select the ARRANGE Softkey, then select the OUTBOX Softkey. Or : 1) Press the MENU Key to display the Page Menu...
Page 469 - Figure 8-96 Viewing Message Content
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 457 ADDITIONAL FEATURES a) Press the MENU Key to display the Page Menu. b) Turn either FMS Knob to place the cursor on ‘View Selected Message’. c) Press the ENT Key. Message content is displayed as shown in Figure 8-96. Figure 8-96...
Page 472 - Figure 8-98 Desired Network Selected; Figure 8-99 Enter Security Code
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 460 ADDITIONAL FEATURES 4) Turn either FMS Knob to select the desired network. See Figure 8-98. Figure 8-98 Desired Network Selected 5) Select the CONNECT Softkey. Or : a) Press the MENU Key to display the Page Menu. b) Turn either...
Page 473 - Figure 8-101 Save Connection
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 461 ADDITIONAL FEATURES 7) Press the ENT Key. ‘OK’ will be highlighted. 8) Press the ENT Key again. 9) The SAVE SETTINGS window is now displayed with the cursor highlighting ‘SAVE CONNECTION’. Figure 8-100 Save Option 10) The selec...
Page 474 - To edit a saved network:; While viewing list of saved networks, press the; Knob to activate the cursor as seen in Figure 8-102.; Knob to highlight the network to be edited.; Figure 8-102 Select Network to be Edited
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 462 ADDITIONAL FEATURES To edit a saved network: 1) While viewing list of saved networks, press the FMS Knob to activate the cursor as seen in Figure 8-102. 2) Turn either FMS Knob to highlight the network to be edited. 3) Pressing...
Page 475 - Figure 8-103 Select Attributes to Edit
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 463 ADDITIONAL FEATURES 4) Select the EDIT Softkey. The cursor now appears in the CONNECTION SETTINGS window as shown in Figure 8-103. Figure 8-103 Select Attributes to Edit 5) Turn the large FMS Knob to select the network attribut...
Page 476 - SYSTEM DATA LOGGING; using any of three data transmission methods (; To view the Report Status Page:; Figure 8-104 Report Status Page
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 464 ADDITIONAL FEATURES SYSTEM DATA LOGGING NOTE : An account must be established with Garmin Flight Data Services to make full use of the System Data Logging feature. The system provides recording of CAS and CMC messages that occu...
Page 477 - Figure 8-105 Select Transmission Method
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 465 ADDITIONAL FEATURES To change transmission method: 1) While viewing the Report Status Page, press the FMS Knob to activate the cursor. 2) Turn the large FMS Knob to move the cursor to the 1st or 2nd transmit method for the desi...
Page 479 - XM RADIO ENTERTAINMENT; passengers’ enjoyment. The GDL 69A can receive XM Satellite Radio; ACTIVATING XM SATELLITE RADIO SERVICES; These IDs are located:
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 467 ADDITIONAL FEATURES 8.7 XM RADIO ENTERTAINMENT NOTE: Refer to the Hazard Avoidance Section for information about XM Weather products. The optional XM Radio entertainment feature of the GDL 69A Data Link Receiver is available fo...
Page 480 - RADIO; USING XM RADIO; MFD controls. See the GRC 10 User’s Guide for details.
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 468 ADDITIONAL FEATURES 6) Select the LOCK Softkey. 7) Turn the large FMS Knob to highlight YES. 8) To complete activation, press the ENT Key. RADIO and INFO Softkeys Figure 8-108 XM Information Page Audio Radio ID Weather Products...
Page 481 - Figure 8-109 XM Radio Page; ACTIVE CHANNEL AND CHANNEL LIST
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 469 ADDITIONAL FEATURES Figure 8-109 XM Radio Page Volume Field Categories Field Channel List Active Channel ACTIVE CHANNEL AND CHANNEL LIST The Active Channel Box on the XM Radio Page displays the currently selected channel that t...
Page 482 - Figure 8-110 Categories List
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 470 ADDITIONAL FEATURES CATEGORY The Category Box of the XM Radio Page displays the currently selected category of audio. Categories of channels such as jazz, rock, or news can be selected to list the available channels for a type ...
Page 483 - PRESETS; MORE; the channel list for the Presets category.; Figure 8-111 Accessing and Selecting XM Preset Channels; VOLUME; VOL; Softkey, which brings up the; MUTE; Softkey and the volume increase and decrease softkeys.; Figure 8-112 Volume Control
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 471 ADDITIONAL FEATURES PRESETS Up to 15 channels from any category can be assigned a preset number. The preset channels are selected by selecting the PRESETS and MORE Softkeys. Then the preset channel can be selected directly and ...
Page 484 - highlight the first empty scheduler message naming field.; • Event—Message issued at the specified date/time
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 472 ADDITIONAL FEATURES 8.8 SCHEDULER The Scheduler feature can be used to enter and display reminder messages (e.g., Phase 1 Inspection, Switch fuel tanks, or Altimeter-Transponder Check) in the Alerts Window on the PFD. Messages ...
Page 485 - highlight the name field of the scheduler message to be deleted.; Softkey label changes to ADVISORY. Pressing the; ADVISORY; Softkey opens the Alerts Window; from the message queue.; Figure 8-114 PFD Alerts Window
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 473 ADDITIONAL FEATURES 9) For event-based messages: a) Use the FMS Knob to enter the desired date (DD-MM-YY) and press the ENT Key. b) Press the ENT Key again or use the large FMS Knob to move the cursor to the next field. c) Use ...
Page 486 - system can display video for up to two inputs.; Displaying auxiliary video:; Knob to select the AUX page group.; Knob to select VIDEO and display the AUX-VIDEO Page.; Figure 8-115 Video Display Softkeys
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 474 ADDITIONAL FEATURES 8.9 AUXILIARY VIDEO The G1000H system provides an optional control and display interface to an auxiliary video system. The system can display video for up to two inputs. There are four modes of operation of ...
Page 487 - VIDEO SETUP; RESET
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 475 ADDITIONAL FEATURES Selecting video menu options: 1) While viewing the AUX - VIDEO Page press the MENU Key to display the Page Menu OPTIONS. 2) Turn the large FMS Knob to highlight the desired video adjustment option and press ...
Page 488 - DISPLAY SELECTION; changes to grey with black characters. Pressing the; HIDE MAP; Softkey again restores the map view and the; Figure 8-118 Full Screen Video Display
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 476 ADDITIONAL FEATURES DISPLAY SELECTION Pressing the HIDE MAP Softkey removes the map and displays video on the full screen. The softkey label changes to grey with black characters. Pressing the HIDE MAP Softkey again restores th...
Page 489 - INPUT SELECTION
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 477 ADDITIONAL FEATURES INPUT SELECTION While on the AUX - VIDEO Page, press the INPUT Softkey to select Input 1 or Input 2. The selected input is displayed in the upper left of the video display. ZOOM/RANGE Pressing the VID ZM + o...
Page 490 - ABNORMAL OPERATION; SVS TROUBLESHOOTING; Figure 8-120 SVS Reversionary Mode
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 478 ADDITIONAL FEATURES 8.9 ABNORMAL OPERATION SVS TROUBLESHOOTING SVS is intended to be used with traditional attitude, heading, obstacle, terrain, and traffic inputs. SVS is disabled when valid attitude or heading data is not ava...
Page 491 - Figure 8-121 Unusual Attitude Display; Blue Band; Figure 8-122 Blue Sky Bar with Full Display Terrain
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 479 ADDITIONAL FEATURES UNUSUAL ATTITUDES Unusual attitudes are displayed with red chevrons overlaid on the display indicating the direction to fly to correct the unusual attitude condition. The display shows either a brown or blue...
Page 492 - GDL 69H/69AH DATA LINK RECEIVER TROUBLESHOOTING; • Ensure the XM subscription has been activated; Selecting the System Status Page:; Knob to select the AUX Page Group.; Figure 8-123 LRU Information Window on System Status Page
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 480 ADDITIONAL FEATURES GDL 69H/69AH DATA LINK RECEIVER TROUBLESHOOTING Some quick troubleshooting steps listed below can be performed to find the possible cause of a failure. • Ensure the owner/operator of the aircraft in which th...
Page 493 - Message; Table 8-7 GDL 69/69A Data Link Receiver Error Messages
Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 190-01255-00 Rev. B 481 ADDITIONAL FEATURES If a failure still exists, the following messages may provide insight as to the possible problem: Message Message Location Description CHECK ANTENNA XM Radio Page - active channel field Data Link Receiver an...
Page 495 - APPENDIX A; ANNUNCIATIONS AND ALERTS; CAS MESSAGES; WARNING MESSAGES
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 483 APPENDIX A ANNUNCIATIONS AND ALERTS CAS MESSAGES WARNING MESSAGES See the Rotorcraft Flight Manual (RFM) for recommended pilot actions. Annunciation Text Description Audio Alert BATTERY HOT Battery overheat detected. Single Chi...
Page 496 - FLOAT TEST
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 484 APPENDIX A Annunciation Text Description Audio Alert MGT MISCOMP MGT miscompare event. Single Ping NG EXCEED Engine Ng is in exceedance. NG MISCOMP Ng miscompare event. NP EXCEED Engine NP is in exceedance. NP MISCOMP NP miscom...
Page 497 - When a new message is issued, the
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 485 APPENDIX A G1000H SYSTEM ANNUNCIATIONS When a new message is issued, the MSG Softkey will flash to alert the flight crew of a new message. It will continue to flash until acknowledged by pressing the softkey. Active messages ar...
Page 498 - Figure A-2 G1000H System Failure Annunciations; System Annunciation; Attitude and Heading Reference System is aligning.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 486 APPENDIX A Figure A-2 G1000H System Failure Annunciations GDC 74B Air Data Computer GTX 33/D Transponder Or GIA 63W Integrated Avionics Units GDC 74B Air Data Computer GEA 71 Engine Airframe Unit Or GIA 63W Integrated Avionics ...
Page 499 - Display system is not receiving valid heading input from AHRS.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 487 APPENDIX A System Annunciation Comment Display system is not receiving airspeed input from air data computer. Display system is not receiving valid heading input from AHRS. Display system is not receiving altitude input from th...
Page 500 - HTAWS Alerts Summary; HTAWS SYSTEM STATUS ANNUNCIATIONS; TERRAIN DATABASE FAILURE
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 488 APPENDIX A HTAWS ALERTS Alert Type PFD/HTAWS Page Alert Annunciation MFD Pop-Up Alert (except HTAWS Page) Aural Message Reduced Required Terrain Clearance Warning (RTC) “Warning; Terrain, Terrain” Imminent Terrain Impact Warnin...
Page 501 - HTAWS FAIL; VOICE ALERTS; Voice Alert
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 489 APPENDIX A Alert Type PFD/HTAWS Page Status Annunciation HTAWS Page Center Banner Annunciation Aural Message Terrain or Obstacle database unavailable or invalid on all displays, invalid software configuration, HTAWS audio fault...
Page 502 - G1000H SYSTEM MESSAGE ADVISORIES; MFD & PFD MESSAGE ADVISORIES
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 490 APPENDIX A G1000H SYSTEM MESSAGE ADVISORIES NOTE: This Section provides information regarding G1000H message advisories that may be displayed by the system. Knowledge of the aircraft, systems, flight conditions, and other exist...
Page 511 - FLIGHT PLAN IMPORT/EXPORT MESSAGES
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 499 APPENDIX A MISCELLANEOUS MESSAGE ADVISORIES (CONT.) Message Comments MAG VAR WARN – Large magnetic variance. Verify all course angles. The GDU’s internal model cannot determine the exact magnetic variance for geographic locatio...
Page 512 - Flight Plan Import/Export Results
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 500 APPENDIX A Flight Plan Import/Export Results Description ‘Some waypoints not loaded. Waypoints locked.’ The flight plan on the SD card contains one or more waypoints that the system cannot find in the navigation database. The f...
Page 513 - APPENDIX B; DATABASE MANAGEMENT; JEPPESEN DATABASES; this database had been referred to as the ‘aviation database’.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 501 APPENDIX B DATABASE MANAGEMENT CAUTION: Never disconnect power to the system when loading a database. Power interuption during the database loading process could result in maintenance being required to reboot the system. The sy...
Page 514 - Figure B-1 Standby Navigation Database Prompt
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 502 APPENDIX B Updating the active Jeppesen navigation database (not using the Dual Navigation Database or Automatic Database Synchronization Features): 1) With the system OFF, insert the SD card containing the new navigation datab...
Page 515 - Loading a standby navigation database:; Turn the system ON. A prompt similar to the following is displayed.; Figure B-3 Standby Navigation Database Prompt; YES
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 503 APPENDIX B DUAL NAVIGATION DATABASE FEATURE The dual navigation database feature allows each display to store an upcoming navigation database on the bottom SD card so that the system can automatically load it to replace the act...
Page 516 - Figure B-4 Standby Navigation Database Update Complete
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 504 APPENDIX B 5) After the navigation database files are copied to the bottom SD card, the display will appear as shown in Figure B-4. Figure B-4 Standby Navigation Database Update Complete 6) As instructed on the display, press a...
Page 517 - GARMIN DATABASES; Figure B-7 Correct Database Locations
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 505 APPENDIX B 13) Turn system power OFF. 14) Remove the SD card from the top card slot of the MFD. 15) Turn system power ON. 16) Press the ENT Key to acknowledge the startup screen. 17) Turn the large FMS Knob to select the AUX Pa...
Page 518 - database versions must be kept in each display unit.; AUTOMATIC DATABASE SYNCHRONIZATION FEATURE
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 506 APPENDIX B Since these databases are not stored internally in the displays, a Supplemental Data Card containing identical database versions must be kept in each display unit. The basemap database contains data for the topograph...
Page 519 - Figure B-9 Synchronization Error Message; ‘Card Full’ Message
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 507 APPENDIX B The synchronization progress may be monitored on the AUX-System Status Page in the Sync Status section of the Database Window (Figure B-8). This section shows the synchronization status of each applicable database, i...
Page 520 - Error Message; Table B-1 Database Synchronization Error Messages; UPDATING GARMIN DATABASES; • Updated database obtained from the Garmin website
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 508 APPENDIX B Error Message Description Canceled Database synchronization has been canceled by removing the bottom SD card in display being updated Card Full SD card does not contain sufficient memory Err Displayed for all other e...
Page 521 - Figure B-10 Database Information on the Power-up Screen; Unselected
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 509 APPENDIX B Figure B-10 Database Information on the Power-up Screen 5) Acknowledge the Power-up Page agreement by pressing the ENT Key or the right most softkey. 6) Turn the large FMS Knob to select the AUX Page group on the MFD...
Page 522 - Figure B-12 GRS Magnetic Field Variation Database Update Prompt; Loading the magnetic field variation database update:; Key on the MFD. A progress monitor is displayed; Figure B-13 Uploading Database to GRS; When the upload is complete, the system is ready for use.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 510 APPENDIX B MAGNETIC FIELD VARIATION DATABASE UPDATE A copy of the current magnetic field variation database (MV DB) is included with the navigation database. At startup, the system compares this version of the MV DB with that p...
Page 523 - APPENDIX C; GLOSSARY
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 511 APPENDIX C ACC accuracyACT, ACTV active, activate ADC air data computer ADF Automatic Direction Finder ADI Attitude Direction Indicator AF Arc to fix AFCS Automatic Flight Control System AFRM airframeAGL Above Ground Level AHRS...
Page 529 - APPENDIX D; FREQUENTLY ASKED QUESTIONS; on GPS for all phases of flight.; sBas; performs the following functions:
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 517 APPENDIX D FREQUENTLY ASKED QUESTIONS If a particular aspect of G1000H operational capability is not addressed by these commonly asked questions or in the index, contact Garmin (see the copyright page or back cover for contact ...
Page 532 - after; ACTIVATE APPROACH
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 520 APPENDIX D w hen DOes the cDi scale change ? Once a departure is activated, the Course Deviation Indicator (CDI) full scale deflection is set to 0.3 nm. The CDI scale changes to 1.0 nm (terminal mode) then ramps up to 2.0 nm (e...
Page 533 - APPENDIX E; GENERAL TIS INFORMATION; INTRODUCTION; Aircraft without an operating transponder are invisible to TIS.; TIS LIMITATIONS; comprehensive explanation.
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 521 APPENDIX E GENERAL TIS INFORMATION INTRODUCTION NOTE : Aircraft without an operating transponder are invisible to TIS. The Traffic Information Service (TIS) provides traffic advisory information to non-TAS/TCAS-equipped aircraf...
Page 534 - The following errors are common examples:
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 522 APPENDIX E WARNING : Garmin is not responsible for Mode S geographical coverage. Operation of the ground stations is the responsibility of the FAA. Refer to the AIM for a Terminal Mode S radar site map. NOTE : TIS is unavailabl...
Page 535 - APPENDIX F; Item; DISPLAY SYMBOLS
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 523 APPENDIX F AIRPORT Item Symbol Unknown Airport Non-towered, Non-serviced Airport Towered, Non-serviced Airport Non-towered, Serviced Airport Towered, Serviced Airport Restricted (Private) Airport Heliport NAVAIDS Item Symbol In...
Page 536 - Mode C Tower Area
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 524 APPENDIX F LINE SYMBOLS Item Symbol ICAO Control AreaClass B Airspace Mode C Tower Area Warning AreaAlert AreaCaution AreaDanger AreaProhibited AreaRestricted AreaTraining AreaUnknown AreaClass CTerminal Radar Service AreaMode ...
Page 537 - HTAWS Obstacle Colors and Symbology; HTAWS Potential Impact Point Symbols with Alert Types; TERRAIN COLOR CHART; Terrain Altitude/Color Correlation for HTAWS
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 525 APPENDIX F OBSTACLE DATABASE Unlighted Obstacle Lighted Obstacle Obstacle Location < 1000’ AGL > 1000’ AGL < 1000’ AGL > 1000’ AGL Red obstacle is at or above current aircraft altitude Yellow obstacle is between 0’ ...
Page 538 - HAZARD AVOIDANCE FEATURES; Feature
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX 526 APPENDIX F MISCELLANEOUS Item Symbol ARTCC Frequency or FSS Frequency Default Map Pointer Elevation Pointer Wind Vector Measuring Pointer Overzoom Indicator Terrain Proximity or TAWS Enabled Traffic Enabled User Waypoint Vertic...
Page 541 - INDEX
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX I-1 INDEX A Access code ------------------------------------------------- 438 Activate a Flight Plan -------------------------------------- 217 Active channel ---------------------------------------------- 469 Active database -----...
Page 543 - Intersection
190-01255-00 Rev. B Garmin G1000H ™ Pilot’s Guide for the Bell 407GX I-3 INDEX Indicated Altitude ------------------------------------------ 248 Initialization (system) --------------------------------------- 11 Intersection Information --------------------------------------- 177–178 Inverting a fli...
Garmin 0734.7A
User Manual
Garmin 010-11099-10
User Manual
Garmin 100
User Manual
Garmin 100/100i
Quick Guide
Garmin 100 BLUE
User Manual
Garmin 10v
Installation Manual
Garmin 110
User Manual
Garmin 120
User Manual
Garmin 160
User Manual
Garmin 160 BLUE
User Manual
Garmin 130
User Manual
Garmin 1633.A7
User Manual