Garmin 906-1090-05 - Manuals

5 Step Four: Pop the ring off the ball on the drive arm of the throttle actuator that’s located just below the carburetor, as seen in Figure 4. Figure 6 Step Five: Remove the Hex Cap Screw from the actuator as seen in Figures 5 & 6. Remove the Drive arm. Figure 4 Figure 5

Figure 9 6 Figure 7 Modified Part Figure 8 Step Six: Modify drive arm Use a hack saw or similar to remove the left "ear" of the throttle drive arm. See Figure 7. (You can smooth the edges with a file or a piece of sand paper if needed. NOTE: The throttle lever must be free to advance with ou...

Step Nine: Remove the head bolt, as indicated in Figure 11 & 11-A. 7 Figure 10 Figure 11-A Figure 11 Step Eight: Push the ring back over the ball on the drive arm, per Figure 10.