Garland MPOE5L - Manuals - manualsarea.com

Page 3 - TABLE OF CONTENTS

Part # 4518084 Rev. 1 (09/04) Page 3 TABLE OF CONTENTS DIMENSIONS AND SPECIFICATIONS ........................................................................4INSTALLATION ..............................................................................................................5Electrical Connect...

Page 4 - DIMENSIONS AND SPECIFICATIONS

Part # 4518084 Rev. 1 (09/04) Page 4 DIMENSIONS AND SPECIFICATIONS Clearances Shipping Weight Entry Installation Service Crated Uncrated Sides Rear Right Side Rear 36" (914mm) 31" (787mm) 1" (25mm) 1" (25mm) 20" (508mm) 20" (508mm) 380lbs. (173kg) Total kW Total kW Per Line N...

Page 5 - INSTALLATION; Electrical Connection; WATER CONNECTION; Water Quality

Part # 4518084 Rev. 1 (09/04) Page 5 INSTALLATION Proper placement of the oven will ensure operator convenience and satisfactory performance. Adequate clearance must be provided for cleaning, servicing, and proper operation. (Refer to chart on page 4. for minimum clearances.) Electrical Connection B...

Page 6 - OPER ATING INSTRUCTIONS; Upper Right Blank/Temp Button

Part # 4518084 Rev. 1 (09/04) Page 6 OPER ATING INSTRUCTIONS Description of ControlsDisplay Th e display shows information about the control and its current operation mode i.e.: product name, time, program mode, etc. On/Oﬀ Button Th e On/Oﬀ Button is used to toggle the oven on/oﬀ . Upper Right Blank...

Page 8 - Control Operation; Startup and Normal Operation

Part # 4518084 Rev. 1 (09/04) Page 8 OPER ATING INSTRUCTIONS continued... Control Operation Startup and Normal Operation • Pressing the On/Oﬀ button will power up the control and the oven will begin heating to Preheat The user can select Preheat Bakery 350 or Preheat Bread 425 to heat the oven to th...

Page 9 - Control Programming; Recipe Programming

Part # 4518084 Rev. 1 (09/04) Page 9 OPER ATING INSTRUCTIONS continued... Control Programming Recipe Programming • NOTE : In programming product buttons (1-17), each button can have diﬀerent steps called Proﬁles. Each proﬁle can change the fan speed, cook temperature, cook time, alarm, time mode, an...

Page 11 - Diagnostics Mode

Part # 4518084 Rev. 1 (09/04) Page 11 OPER ATING INSTRUCTIONS continued... Diagnostics Mode • To enter Diagnostics Mode, press and hold the Program (lower right blank) button for three, (3), seconds. When prompted, enter the code: 3-4-2- 4 using the buttons 1 – 0. Press “ENTER” (lower right blank). ...

Page 13 - Control Safety Features; power to the heaters will; Installing a New Pecipe Program; Using the CARD Reader

Part # 4518084 Rev. 1 (09/04) Page 13 Temperature does not correspond to the pyrometer, enter the value on the pyrometer using buttons 1 – 0. The value will be input as Set Temp. 3. Press “ENTER” (lower right blank) to accept the changes. The Actual Temperature will change to equal the value input f...

Page 14 - CLEANING AND MAINTENANCE; Check Calibration; Break in Period; Oven Cleaning

Part # 4518084 Rev. 1 (09/04) Page 14 CLEANING AND MAINTENANCE Check Calibration Tools: Digital thermometer with probe; oven mitt. See also, Temperature Calibration on page 12.1. Clamp the probe in the center of the middle rack. 2. Pass the probe wire out of the oven between the door and the door se...

Page 15 - • NOTE; Motor Care

Part # 4518084 Rev. 1 (09/04) Page 15 CLEANING AND MAINTENANCE Oven Cleaning Interior • NOTE : Disconnect the oven from the power supply before cleaning or servicing. • Establish a regular cleaning schedule. Any spills should be wiped oﬀ immediately. Tools: Supplied spray hose; brush; cloth • NOTE :...