Page 3 - SAFETY INSTRUCTIONS; CAUTION
i SAFETY INSTRUCTIONS Confirm that the power supply voltage is compatible with the voltage ratingof the equipment. Connection to the wrong power supply can cause fire or damage the equipment. CAUTION NOTICE No one navigation device should ever be solely relied upon for the navigation of a vessel. Al...
Page 4 - ii; TABLE OF CONTENTS
ii TABLE OF CONTENTS SYSTEM OVERVIEW........................................................................................... iii EQUIPMENT LISTS .............................................................................................. v 1. MOUNTING ..............................................
Page 5 - iii; SYSTEM OVERVIEW
iii SYSTEM OVERVIEW The GP-320B is a GPS receiver with WAAS (Wide Area Augmentation System) capability. WAAS, available in North America, is a provider in the worldwide SBAS (Satellite Based Augmentation System) navigation system. An SBAS provider furnishes GPS signal corrections to SBAS users, for ...
Page 6 - iv
iv Other Equipment* JUNCTION BOX GD-XXXX GR-80 Ship's Mains (12-24 VDC) Multi Display RD-30*Echo Sounder LS-6100 NavNet Series Model 1722C Model 1833C Model 1722 Model 1933C Model 1732C Model 1943C Model 1732 Model 1833 Model 1742C Model 1933 Model 1742 Model 1943 Model 1752C Model 1953C Model 1752 ...
Page 7 - EQUIPMENT LISTS; Standard supply; GPS Receiver; Optional equipment; Cable Assembly
v EQUIPMENT LISTS Standard supply Name Type Code No. Qty Remarks GPS Receiver GP-320B 1 With 10 m cable Optional equipment Name Type Code No. Qty Remarks Cable Assembly MJ-A7SPF/SRMD-100 000-144-534 1 7P-7P, straight, 10 m Mast Mounting Kit CP20-01111 004-365-780 1 Right Angle Antenna Base NO.13-Q...
Page 8 - vi
Page 9 - Mounting considerations; harmonic wave of a VHF antenna.; Mounting procedure
1 1. MOUNTING Mounting considerations Follow the guidelines below to choose a suitable mounting location for the antenna unit. • The antenna may be mounted three ways: screwed into a pipe (local supply), fixed to a post with the optional mast mounting kit, or screwed into an optional mounting base. ...
Page 10 - Connecting to FURUNO NavNet equipment; Connect the antenna cable to the DATA1 port on NavNet equipment.; Waterproofing connectors
2 2. WIRING This unit outputs position and speed to external equipment. NavNet equipment, Multi Display RD-30 and Echo Sounder LS-6100 can be connected directly. For connection to other equipment, use a junction box (local supply) which has seven terminals. The antenna cable is 10 meters long. If th...
Page 11 - Connecting to Multi Display RD-30; WAAS is not operative in this installation.; Connecting to Echo Sounder LS-6100
3 Connecting to Multi Display RD-30 WAAS is not operative in this installation. Antenna Cable10 m MULTI DISPLAY RD-30 AUX port IN/OUT port 12-24 VDC AUX IN/OUT 12-24 VDC Rear Panel Connecting to Echo Sounder LS-6100 Antenna Cable10 m ECHO SOUNDER LS-6100 REAR NMEA XDR POWER 12VDC POWER 12 VDC NMEA
Page 12 - Connecting to other equipment; WAAS function is inoperative when wiring as shown above.
4 Connecting to other equipment Remove the connector from the antenna cable and attach crimp-on lugs or similar terminals to the cable’s cores. Connect the cores to the junction box as below. Antenna Cable10 m non-NavNet equipment RS-422* input for radar/plotter Correction data from GR-80output in R...
Page 13 - Output/Input data sentences; Priority
5 Output/Input data sentences Priority Input Data Output Data Settable Output Cycle Default Output GPDTM Geometric datum Yes Yes XXGGA GPS position status (time of fix, latitude, longitude, receive status, satellite used) GPGGA GPS fix data Yes Yes XXZDA UTC date (time in minutes and seconds, day, m...
Page 15 - Troubleshooting; ) Check that the antenna cable is firmly fastened.; Battery
7 4. TROUBLESHOOTING, BATTERY Troubleshooting If the message “No position data” appears on the display of NavNet equipment, there may be a problem with the GPS receiver. Turn off the power and then check the following points: 1) Check for objects around the antenna which may interfere with reception...
Page 16 - SPECIFICATIONS OF THE GPS RECEIVER
SP - 1 E4422S01A SPECIFICATIONS OF THE GPS RECEIVER GP-320B 1. GENERAL 1.1 Receiving Channels GPS 12 channels parallel, 12 satellites tracking WAAS 1 channel 1.2 Rx Frequency 1575.42 MHz 1.3 Rx Code C/A code, WAAS 1.4 Position Fixing System All in view, 8-state Kalman filter 1.5 Position Accuracy GP...