Furuno FA-30 - Manuals

Furuno FA-30 – Manual in PDF format online.

Manuals:

Manual

Manual Furuno FA-30

Summary

Page 3 - IMPORTANT NOTICES

i IMPORTANT NOTICES • The descriptions in this manual are intended for readers with a solid knowledge of English. • No part of this manual may be copied or reproduced without written permission. • If this manual is lost or worn, contact your dealer about replacement. • The contents of this manual an...

Page 4 - ii; CAUTION; Prohibitive Action; SAFETY INSTRUCTIONS; WARNING; WARNING; WARNING; Safety instructions for the operator

ii WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION Indicates a potentially hazardous situation which, if not avoided, can result in minor or moderate injury. Warning, Caution Mandatory Action Prohibitive Action SAFETY INSTRU...

Page 5 - iii; Safety instructions for the installer

iii CAUTION Observe the following compass safedistances to prevent interference to amagnetic compass: Turn off the power at the switchboardbefore beginning the installation. Fire or electrical shock can result if thepower is left on. Do not install the equipment where itmay get wet from rain or wate...

Page 6 - iv; TABLE OF CONTENTS

iv TABLE OF CONTENTS FOREWORD ......................................................................................................... v SYSTEM CONFIGURATION ................................................................................ vi 1. INSTALLATION ............................................

Page 7 - FOREWORD; A Word to the Owner of the FA-30; Features

v FOREWORD A Word to the Owner of the FA-30 Congratulations on your choice of the FURUNO FA-30 AIS Receiver. We are confi-dent you will see why the FURUNO name has become synonymous with quality and reliability. For over 50 years FURUNO Electric Company has enjoyed an enviable reputation for quality...

Page 8 - SYSTEM CONFIGURATION

vi SYSTEM CONFIGURATION AIS RECEIVER FA-30 HUB WHIP ANTENNA SENSOR OR 12-24 VDC IF-1500AIS OR FR-8xx2 SERIES GPSSPEED LOGGYROCOMPASSSATELLITE COMPASS NAVNETRADARCHART PLOTTERECDISPILOT PLUG PC w/FAISPC MX EXTERNAL DISPLAY : Standard supply: Optional supply: Local supply NAVNET EXTERNAL DISPLAY

Page 9 - INSTALLATION; Equipment Lists

1 1. INSTALLATION 1.1 Equipment Lists Standard supply Optional supply Name Type Code No. Qty Remarks AIS Receiver FA-30 - 1 Installation Materials CP05-11101 001-014-160 1 set Tapping screw (4x20, 4 pcs.) AIS Viewer FP05-05910 000-010-938 1 set FAISPC-MX for PC Spare Parts SP05-05701 001-014-150 1 s...

Page 11 - Whip Antenna

3 1.3 Whip Antenna Location The location of the AIS VHF-antenna should be carefully considered. Digital commu-nication is more sensitive than analog/voice communication to interference created by reflections in obstructions like masts and booms. It may be necessary to relocate the VHF radiotelephone...

Page 12 - Wiring

4 1.4 Wiring Connect power source, LAN cable, VHF antenna and ground wire as shownbelow. *1 Supply from breaker on switchboard. *2 If COM lines (connection for NavNet, sensor) are not used, tape them to prevent short circuit. VHF WHIPANTENNA(option) RED BLACK PC, HUB,NAVNET GROUND COAXIAL CABLE 5D-2...

Page 15 - COM Port Setup, Network Setup

7 2.2 COM Port Setup, Network Setup The FA-30 is set up from the PC or external display. The procedure below shows how to set up the COM/POWER and NETWORK ports from a PC. NOTICE: Only one FA-30 may be connected to the network. Start up 1. Start up the PC and enter IP address and subnet mask. 1) Rig...

Page 18 - Own Vessel Data Display, Channel Selection

10 2.3 Own Vessel Data Display, Channel Selection The Own Vessel Data display shows your ship’s MMSI no., RX channel nos., and channel selection method. 1. Show the main menu, referring to section 2.2.2. Click Own Vessel Data. Description of own vessel data MMSI: MMSI number (nine-digit number). RX1...

Page 20 - Sensor Status

12 2.4 Sensor Status The sensor status display provides information about sensors connected to the FA-30. 1. Show the main menu, referring to section 2.2.2. Click Sensor Status. The illustration below shows typical sensor status indications. * 1 Whichever navigator is in use. * 2 Displayed for 30 se...

Page 21 - Maintenance

13 3. MAINTENANCE,TROUBLESHOOTING 3.1 Maintenance Regular maintenance helps maintain good performance. Check the items listed below at least monthly to help keep your equipment in good working order. Maintenance table Item Check point, remedy Wiring Check that each cable and wire are securely fasten...

Page 23 - Diagnostics

15 3.4 Diagnostics The built-in diagnostic facility displays program version no. and checks RAM, ROM and RX channels for proper operation. 1. Open Internet Explorer and show the main menu. 2. Click Test to show the Test display. The program version number appears on the first line. The CPU1 RAM and ...

Page 24 - VHF CHANNEL LIST

AP-1 VHF CHANNEL LIST Ch No. Frequency Ch No. Frequency Ch No. Frequency Ch No. Frequency 1001 156.05 1088 157.425 277 156.8875 2079 161.575 1002 156.1 1201 156.0625 1278 156.9375 2080 161.625 1003 156.15 1202 156.1125 1279 156.9875 2081 161.675 1004 156.2 1203 156.1625 1280 157.0375 2082 161.725 10...

Page 25 - FURUNO; SPECIFICATIONS OF AIS RECEIVER

FURUNO FA-30 SP-1 E4443S01A SPECIFICATIONS OF AIS RECEIVER FA-30 1. GENERAL 1.1 Rx Capacity 2250 reports/minute, 1 channel 4500 reports/minute, 2 channels 1.2 Rx System TDMA dual wave simultaneous reception 1.3 Frequency Switching Automatic (external device) 1.4 Complying Regulations IEC 60945 Ed. 4...

Page 30 - Declaration of Conformity

FURUNO ELECTRIC CO., LTD. 9-52 Ashihara-Cho, Nishinomiya City, 662-8580, Hyogo, Japan Tel: +81 798-65-2111 Fax: +81 798-65-4200 Pub NO. DOC-929 Declaration of Conformity We FURUNO ELECTRIC CO., LTD. -----------------------------------------------------------------------------------------------------...