Fujitsu ASTG22KMTC - Manuals

Page 2 - CAUTION; Indoor unit accessories; WARNING

En-2 OPERATING MANUAL WARNING • Do not install the unit in area fi lled with mineral oil such as a factory or area containing a large amount of splashed oil or steam such as a kitchen. • Do not start or stop the operation of this product by inserting or pulling out the power plug, or by turning on o...

Page 3 - AIR CONDITIONER Wall Mounted Type; Indoor Unit Overview and Operations

En-3 AIR CONDITIONER Wall Mounted Type OPERATING MANUAL 1 Intake grille Before starting operation, make sure that the intake grille has been shut completely. Incomplete closing may have an effect on the proper function or performance of the product. 2 MANUAL AUTO button Use when the remote controlle...

Page 4 - Remote Controller Overview and Operations; You can quickly start operation with the following 3 steps:

En-4 OPERATING MANUAL CAUTION • To prevent malfunction or damage of the remote controller: - Place remote controller at where will not be exposed to direct sunlight or excessive heat. - Remove batteries if the product is not going to be used for an extended period. - Exhausted batteries must be remo...

Page 5 - Remote Controller Overview and Operations (continued); RESET

En-5 AIR CONDITIONER Wall Mounted Type OPERATING MANUAL Remote Controller Overview and Operations (continued) 7 Signal transmitter Aim at the signal receiver of the indoor unit properly.• Signal transmit indicator on the remote controller display shows that the signal from the remote controller is b...

Page 6 - OPERATING MANUAL; Timer Operation; ON timer or OFF timer; Program timer (combined use of the ON timer and the OFF timer); Remote controller custom code setting; Remote Controller Overview and

OPERATING MANUAL En-6 Timer Operation NOTES for timer settings: Any interruption of the power supply, such as a blackout or cutting off of a circuit breaker, makes the set internal clock go wrong.In such a case, the TIMER indicator on the indoor unit blinks, and you need to readjust the setting. ON ...

Page 7 - To set the WEEKLY timer,

En-7 AIR CONDITIONER Wall Mounted Type OPERATING MANUAL Timer Operation (continued) WEEKLY timer ON and OFF timer can be combined, and up to 4 reservations (program ) per day and 28 reservations per week. Before setting the program, please set the week and time of the air conditioner fi rst. If the ...

Page 8 - Demand Response and Indoor Unit Operation; About the ENERGY SAVING Operation; About the HUMAN SENSOR

En-8 OPERATING MANUAL Demand Response and Indoor Unit Operation Human Sensor (Energy Saving) To prevent waste of electricity, this function controls the temperature setting when no one is occupying the room. Energy Saving program is on at the time of purchase. 1 To activate the Energy Saving program...

Page 9 - General Information on Operation; Automatic defrosting operation; Auto-restart function; Heating performance; Temperature and Humidity Range

En-9 AIR CONDITIONER Wall Mounted Type OPERATING MANUAL General Information on Operation Automatic defrosting operation When outdoor temperature is very low with high humidity, frost may form on the outdoor unit during the heating operation, and it could reduce the operating performance of the produ...

Page 10 - Care and Cleaning

En-10 OPERATING MANUAL Care and Cleaning CAUTION • Before cleaning this product, be sure to turn it off and disconnect all the power supply.• Before starting operation, make sure that the intake grille has been shut completely. Incomplete closing of the intake grille might have an effect on the prop...

Page 11 - After extended non-use of the unit

En-11 AIR CONDITIONER Wall Mounted Type OPERATING MANUAL Care and Cleaning (continued) Replacing the air cleaning fi lters 1 Remove the air fi lter. (Refer to step 1 and 2 in “Cleaning the air fi lters”.) 2 Release 2 latches a of the fi lter holder, and turn over the holder in direction of arrow b ....

Page 12 - Troubleshooting

En-12 OPERATING MANUAL WARNING In following events, immediately stop operation of the air conditioner, and disconnect all the power supply by turning off the electrical breaker or disconnecting the power plug. Then consult your dealer or authorized service personnel.As long as the unit is connected ...