Fujifilm EX3.1 - Manuals

9 8 Drag1. Position the mouse pointer over the file or folder icon you want to drag. 2. With the mouse button held down, move the mouse to another location. DropWhen you reach the desired location,release the mouse button. ■ Drag & drop An operation used to move, copy or store files and folders....

11 1 2 3 4 5 6 7 8 5 6 7 8 Installation on a Windows PC 10 This chapter describes how to install and set up the software on a WindowsPC. Disconnect the camera in DSC mode. Connect the camera in PC CAMERA mode. • Check that the USB PC Camera Driver is operating normally.• The first time you connect, ...

12 13 1 2 1. Switch on your PC and start up Windows. ✽ If you have already switched on your PC, restart your PC at this point. Users of Windows 2000 or Windows XP should log in using a system administratoraccount (e.g. “Administrator”). 2. Quit all other active applications until no applications are...

14 15 2 3 From FinePixViewer installation to restart 4. Pre-installation checking begins. If any warning messages appear, follow the instructions given on the screen. ✽ The “Add New Hardware Wizard” may be hidden behind the “Note” message.Check the taskbar, move the message window and then click the...

19 4 18 4 Proceed to “Disconnecting the Camera (DSC Connection)”on page 20. 1 The “Found New Hardware” help message appears in the bottom-right corner of yourscreen. This message will close when the settings are completed. No action isrequired. ✽ This step is not required for subsequent connections....

21 5 20 5 q 2 Click the Eject icon in the taskbar. When the “Safe To Remove Hardware” dialog boxappears, click the [OK] button. Click the Eject icon in the taskbar. When the “Safe To Remove Hardware”dialog box appears, click the [OK] button. Click the eject icon in the taskbar and click the Close bu...

23 6 22 6 The USB PC Camera Driver is installed automatically. When the followingscreen appears, click the [Continue] button. 5. FinePixViewer starts up automatically and the live image is displayed. If the live image does not appear, refer to “Troubleshooting” ( / P.94) The Exif Launcher installed ...

25 8 24 7 q q 1. Exit any applications that are using the camera (FinePixViewer, etc.). Failure to carry out this step could cause your computer tomalfunction. 2. Check that the camera and PC are not communicating. If communication is inprogress, wait until it ends. 3. Switch the camera off. 4. Unpl...

27 1 2 3 4 5 6 1 2 3 4 5 6 Installing the Software on Mac OS 8.6 to 9.2 The CD-ROM includes software for Mac OS 8.6 to 9.2 and for Mac OS X. Thischapter describes the installation and setup procedures for Mac OS 8.6 to 9.2. Check this before you start the installation. Ensure that your Macintosh har...

29 2 3 28 1 ■ Hardware and software requirements To run this software, you must have the hardware and software describedbelow. Check your system before you begin the installation. Pre-installation Checklist ■ Enable File Exchange Check whether File Exchange is active.To use a SmartMedia that is supp...

33 5 1. Exit any applications that are using the camera (FinePixViewer, etc.). 2. Check that the camera and Macintosh are not communicating. 3. Drag the removable disk icon to the Trash. 4. Switch the camera off. 5. Unplug the special USB cable from the camera. • Always close all the files in the ca...

35 1 2 3 4 34 6 Acrobat Reader installation 6 2 3 4 Check this before you start the installation. Ensure that your Macintosh hardware and software meet the systemrequirements for the software to be installed. Install FinePixViewer and restart your Macintosh. Connect the camera in DSC mode. Disconnec...

Only FinePixViewer is installed on Mac OS X. AVI movies cannot be played back on version 10.0.4. 1. Switch your Macintosh on and start up Mac OS X. Do not launch any other applications. 2. Load the enclosed CD-ROM into the CD-ROM drive. The “FinePix” window opens. If the “FinePix” window does not op...

1. Exit any applications that are using the camera (FinePixViewer, etc.). 2. Check that the camera and Macintosh are not communicating. 3. Drag the removable disk icon to the Trash. 4. Switch the camera off. 5. Unplug the special USB cable from the camera. • Always close all the files in the camera ...

42 43 1 indicates the folder in whichFinePixViewer is installed. 123 6. You can use functions such as “Rotate” and “Type Tool” to modify your image. For details, see “MasteringFinePixViewer” on page 82. 7. Click the [Save As...] button. 8. Enter a file name and click the [Save] button. If you repeat...

45 44 Deleting Images 1. Select the images to be deleted. 2. Click “Delete” in the File menu. 3. Click the [OK] button in the confirmation window to delete the selected images. 1. Double-click a still-image thumbnail to open an image window. 2. Click the [Print] button. 3. Tick the checkboxes for th...

47 46 The figure below gives a general overview of the procedure. Using the FinePixViewer Advanced Features 1 Launch FinePixViewer 2 Select a folder or thumbnail 3 Operations • Double-clicking• Drag & drop• Clicking buttons• Using menus• Using the Internet menu Select a folder Select a thumbnail...

49 48 In the “Start” menu, click “Programs” / “FinePixViewer” / “FinePixViewer”. Double-click “FinePixViewer” in the installation folder. ■ Changing the Automatic Launch Settings Macintosh Windows Launching FinePixViewer Launch automatically Do not launch automatically Windows 98/98 SE/Me/2000 You c...

51 50 Switching between Windows ■ Showing or hiding the Playback pane or folder tree. ■ Selecting the thumbnail display mode ■ Resizing areas You can list the photography dates and times andthe image sizes by selecting “Details”. You can resize an area by dragging its frame. FinePixViewer Components...

53 52 Selecting Folders When you select a folder, the folder name is highlighted and the images inthat folder are displayed in the thumbnail display area. If there are subfolders inside thefolder, a plus or minus symbol appears to the left of the folder.Clicking on the plus or minus symbolopens or c...

55 1. Click (to select 1 image only). 2. Click while holding down the [Ctrl] key (Windows) or [shift] key (Macintosh) (to select another image). 3. Click in the background (to deselect all the selected images). 4. Click “Select All” in the “Edit” menu (to select all the images). Before After 54 Sele...

Deletes the file in the save destination and saves the data as a new file. Cancels batch processing. Leaves the file in the save destination and proceeds to the next step. Allows you to rename the file. 57 56 If you tick this checkbox, a folder is created in which all the images are saved.If there i...

59 58 3. The “FinePix CD Album Maker” window opens and the folders selected in step 2 are registered. • A warning message appears if the amount of registered data exceeds 650 MB.• You cannot register thumbnails displayed in FinePixViewer. Move the thumbnails to a new folder and then register the new...

61 60 8. Use the formats below to record images onto the CD. Recording mode: DiscAtOnceFormat: ISO 9660 level 1 About DiscAtOnce• DiscAtOnce is a method for writing data to a CD-R disk in which all the data is written in a single operation. This method does not allow further data to be written to th...

63 62 1. Click “Control Panels” / “Internet” and then click the“E-mail” tab. 2. Check that “Outlook Express” is shown in“Default E-mail Application”. 1. Click “ System Preferences... ” in the Apple menu. 2. Click “ Internet ” and then click “ Mail ” . 3. Check that “ Mail ” is selected as the “ Defa...

To use the FinePix Internet services, users must first register. ✽ Follow the steps below to register. Users can be registered for free. 1. Launch FinePixViewer. 2. Click the [Register Now] button. 3. The “User’s Registration for Internet Services” dialog box opens. As shown below, select [Register ...

71 70 6. After your computer restarts, download the Internet menu again. Launch FinePixViewer and click the [Register Now]button. 7. Select “Already Registered” and then click the [OK] button. 8. Enter your user ID and password. The update is completed when the Internet menu appears. Obtaining the L...

73 72 User Registration Using the FinePix Internet Service (Mac OS X) If you use the FinePixViewer, you can also access the FinePix InternetService via the Internet. When you register, you will be able to use the variousservices provided in the country where you are registered.• The services provide...

75 74 Videoconferencing with PictureHello ■ What is videoconferencing? Videoconferencing is a form of communication in which you can see a liveimage of the person you are calling as you converse in realtime. Thisexplanation describes the use of the FinePixViewer PictureHello software, inwhich specif...

77 76 ■ Picture Descriptions Other party’s image Pop-up menu Your image 9 ✽ Portrait images are inset composite images. Name Explanation q Connection icon Indicates whether you are logged in to the server. w Login button Logs in to the server. e Logout button Logs out from the server. r Start Call b...

81 80 You can use the address book to check the status of other parties and to storeaddresses. To view the address book, click the [Address Book] button. ■ Checking the status Click the [Update Status] button to check the latest status details. [Update Status] button Click the [Capture] button to st...

Mastering FinePixViewer 83 82 You can use VideoImpression to make your own movies.For more information on VideoImpression, refer to the contact informationprovided on the back cover of this manual. ● Allows you to create and save movies that include both still and movingimages and sound. ● Allows yo...

85 84 ■ Add text 1. Click the [edit movie] button to switch to the editing window. 2. Click the [text] button and enter the text. ☞ You can use the drag handle to adjust the position. 3. Use the buttons below the image to specify settings such as the typeface and the time for which the text appears....

91 Uninstalling the Software q <To remove the driver software> Only perform this operation when you no longer require the installed software. 1. Switch on your PC. 2. Disconnect the camera. 3. Quit all currently running applications. 4. Close all files. 5. Open the “My Computer” window and dou...

93 92 When you have a problem My computer doesn’t recognize the camera. • I can’t see the files on the SmartMedia.• I can’t see the removable disk icon.• I can’t shoot live images. Was installation completed normally? Is the camera switched on?Are the batteries dead?Are the cables connected securely...

95 94 OS Type Name of Folder ✽ When using CD-ROM Drive D Windows 98 D:\win98 Windows Me D:\win9x Windows 2000 Professional D:\i386 Windows XP D:\i386 If no Windows CD-ROM was supplied with your PC, contact your PC manufacturer. NOTE ■ I was asked for the disk labeled “Windows” the first time I conne...

99 98 Possible cause Solution ■ I clicked the [Login] button in PictureHello (videoconferencing), but Ican’t log in. Are you able to connect to theInternet? Is the FinePix Internet Serviceundergoing maintenance? Have you completed the userregistration process? Check your PC hardware and softwaresetu...

101 100 Possible cause Solution ■ Live images do not appear in the VideoImpression Capture window. Do you have Windows Media Playerinstalled? Is “PC CAM” selected as the USBsetting on the camera? Is the special USB cable connected tothe camera and your PC? Are you using a compatible operatingsystem?...

103 102 ■ When I connected the camera to my Macintosh, the “Requiredsoftware not found” message or “Required driver cannot be used”message appears. Possible cause Solution Is the software installed? Install the software on your Macintosh. Other If the software does not operate correctly but the prob...

105 104 Possible cause Solution ■ I can’t sign on as a “FinePix Internet Service” user. Have you already signed on under thesame e-mail address? You cannot sign on twice with the sameuser ID or e-mail address. Possible cause Solution ■ I can’t log in to the “FinePix Internet Service”. Are you able t...

107 106 Solution ■ I want to stop the FinePixViewer from launching automatically. You can use either of the two methods below to prevent FinePixViewer from launchingautomatically. • Change the Exif Launcher settings 1 Select “Exif Launcher Settings” in the FinePixViewer “Settings” menu and click“Do ...