Fujifilm 100F - Manual
This document primarily serves as a technical specification guide for Fujifilm’s Fujichrome Provia 100F Professional (RDP III) color reversal film, covering its core attributes such as exposure performance under varied lighting conditions, handling and storage requirements, processing instructions, and structural details. The content highlights essential aspects like recommended exposure adjustments for daylight, fluorescent, tungsten, or mixed light sources, including filter and flash usage guidelines. It also addresses practical considerations such as proper film handling, storage conditions (both raw and processed), and processing protocols to ensure optimal results. Additionally, it includes technical specifications on film composition, emulsion layers, and performance metrics like resolving power and spectral sensitivity curves.
Table of Contents:
- Page 1 – Film Specifications and Exposure Guide
- Page 2 – Exposure and Color Balance Guidelines
- Page 3 – Film Handling and Processing Instructions
- Page 4 – Retouching Methods and Film Markings
- Page 5 – Film Structure and Physical Measurements
- Page 6 – Technical Performance Metrics
1
AF3-036E
COLOR REVERSAL FILMS
1.
FEATURES AND USES
FUJICHROME PROVIA 100F Professional [RDP
III
] is an
ultra-high-quality, daylight-type ISO 100-color reversal
film. With the finest grain (an RMS granularity value of 8)
among ISO 100 color reversal films and an extremely
high sharpness, it captures details with unprecedented
clarity, while providing rich gradation, vivid and faithful
color reproduction, and well-controlled gradation bal-
ance. These characteristics make it an ideal choice for a
wide range of subject matter, from product and outdoor
photography to fashion work and portraiture.
Features
Results
FUJICHROME PROVIA 100F Professional [
RDP
III
]
Use a meter for exposure determination. If a meter is
not available refer to the following table.
Emulsion
Number
#
001
Super-fine Grain
Vivid and Faithful
Color
Reproduction
Rich Tone
Reproduction
Improved
Reciprocity
Characteristics
Excellent Push/
pull-processing
E-6/CR-56*/C6R**
Processing
Finely detailed image forma-
tion for large-size enlarge-
ments and other work requir-
ing high-magnification as a
result of the finest grain
among ISO 100 color rever-
sal film.
Extremely satisfying color
depiction, providing the
most brilliant primaries with-
out sacrificing the delicate
pastels, for wide-ranging ap-
plication.
Smooth gradation reproduc-
tion with superb depth,
thanks to bias-free, brilliant
highlights and excellent
highlight-to-shadow grada-
tion linearity.
Increased resistance to loss
in film speed and color bal-
ance during long exposures,
as well as consistently accu-
rate multiple-exposure per-
formance.
Outstanding tolerance to ex-
posure and density compen-
sation during processing,
within 1/2 stop to +2 stops,
resulting in minimal varia-
tions color balance and gra-
dation.
As with other FUJICHROME
film, world-wide processing
available using E-6/CR-56/
C6R chemicals.
* CR-56 is Fujifilm processing system equivalent to E-6 processing.
** C6R is Fuji/ Hunt processing system equivalent to E-6 processing.
Rolls*
Sheets*
2.
SPEEDS
Light Source
Daylight
Tungsten Lamps
(3200K)
Speed
ISO 100/21°
ISO 32/16°*
Filter
None
No.80A**
(LBB-12***)
* Indicates the effective speed resulting from designated filter
use.
** Kodak Filter
*** Fuji Light Balancing Filter (not available in certain markets.)
Speed and color compensating filter values are in-
cluded in each of the sheet film boxes. Use these
values in exposure determination.
3. FILM SIZES, EMULSION NUMBER, BASE
MATERIAL AND THICKNESS
135 ... 36-exp.
... 36-exp. (5-roll and 20-roll packs)
35mm × 30.5m (100ft)
120 ... 12-exp.
... 12-exp. (5-roll packs)
220 ... 24-exp. (5-roll packs)
4 × 5 in (10.2 × 12.7 cm)
..... 10 sheets and 50 sheets
8 × 10 in (20.3 × 25.4 cm)
..... 10 sheets and 50 sheets
11 × 14 in (27.9 × 35.6 cm)
.............................. 10 sheets
QuickLoad 4 × 5 in. ........... 20 sheets
Sizes
* Some sizes are not available in certain markets.
Base Material ......... Cellulose Triacetate
Base Thickness ..... Rolls
135 : 127µm
120 : 98µm
220 : 98µm
Sheets
: 205µm
4. EXPOSURE GUIDE AND EXPOSURE
UNDER VARIOUS LIGHT CONDITIONS
Light
Conditions
Lens
Aperture
Seashore or
Snow Scenes
Under Bright
Sun
Bright
Sunlight
Hazy
Sunlight
Cloudy
Bright
Cloudy
Day or
Open
Shade
f/ 16
f/ 11
f/ 8
f/ 5.6
f/ 4
(Exposure Time 1/250th Sec.)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Fujifilm
- Model
- 100F
- Document type
- Manual
- Language(s)
- English
- Pages
- 6
- File size
- 182.5 KB
- Format
Summary
Details on film features, speed ratings across different light sources, available sizes, emulsion numbers, base material, thickness, and exposure guidance for various lighting conditions.
Guidelines for exposure and color balance based on daylight, fluorescent, tungsten, and mixed light situations, including recommendations for filters, exposure corrections, electronic flash usage, and long exposure compensation.
Detailed procedures for handling, storing, and processing the film, covering exposure precautions, handling methods, storage conditions for unprocessed and processed film, processing requirements, viewing light standards, and printing options.