Frigidaire FFPH1222U1- Manuals

Unit Description & Accessories Included + Unit Description Accessories Included Remote Control Battery Drain hose ( ) ( ) Air Outlet Grill Control Panel RemoteControl Carrying Handle Air Exhaust Castor PARTS: PARTS NAME: QUANTITY: Window Kit Connector A Exhaust hose connector B Window Kit Exhaus...

Installation Instructions Installation Instructions EXHAUSTING HOT AIR In the Cool Mode the appliance must be placed close to a window or opening so that the warm exhaust air can be ducted outside. 7KHKRVHFDQEHH[WHQGHGIURPLWVRULJLQDOOHQJWKRIƎ u SWRƎ ,but it is the best to keep the length to minimum ...

Installation Instructions Installation Instructions(continued) 1.Cut the foam seals A(adhesive type) to the proper lengths and attach them to the window and stool.(Fig.6)2.Open the window sash and place the window slider kit on the window stool (Fig.7). Attach the window slider kit to the window sto...

Display Temperature/Timer Air Conditioner Features & Operating Instructions Control Panel Timer Swing Sleep Mode Selection* Adjust Temperature or Timer Fan Speed Filter Reset Power RQÂRII Cool mode Press the “mode” button until the Cool mode indicator lights. Press the "fan speed" button...

Fan mode Press the “mode” button until the Fan mode indicator lights.In this mode, you can select fan speed “hi”, “med” or “low”.The screen displays room temperature.Note: In this mode, the air exhaust hose does not need to be connected. Dry mode Press the “mode” button until the Dry mode indicator ...

Timer mode How to delay startup Plug in the unit, so the unit turns to standby.Press the “timer” button, then the Timer indicator and number of hours on the screen will light.Tap or hold the UP arrow ( ) or the DOWN arrow ( ) to change delay start timer at 0.5 hour increments up to 10 hours, then at...

Filter reset This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation. The filter indicator will illuminate after 250 hours of fan operation. Press the “filter reset” button, to reset after cleaning the filter. Operating Instructions °C °F Sleep mode Wh...

Remote Control Battery Installation and Important Instructions Cool Only models Heat and Cool models Remote Control screen Timer button Sleep button Mode button Remove the cover at the back of the remote control. Insert the provided batteries correctly(see the instructions inside the battery compart...

Plug in the unit, then press the “on  off” button (when turned on, the unit will operate as the last setting before shutdown. 7RVZLWFKWKHXQLWRIISUHVV³RQÂRII´EXWWRQDJDLQWKHQUHPRYHWKHSOXJ Do NOT switch the unit off by removing the plug. $OZD\VVZLWFKWKHXQLWRIIE\SUHVVLQJWKH³RQÂRII´EXWWRQDQGZDLWIRUIHZPL...

Press the “mode” button until the left side of LCD screen displays “heat”. Press the “ ” and “ ” button to choose the temperature you want. At the same time, the “low” fan indicator lights. Note: In this mode, fan speed will remain in “low” no matter what speed you choose in the remote control. Pres...

You can delay shutdown when the unit is on. Press the “timer” button, when the unit is on. The screen will display “timer”and “h”, and the “off ” will flashing. Tap or hold the UP arrow “ ” or the DOWN arrow “ ” to change delay shutdown timer at 0.5 hour increments up to 10 hours, then at 1 hour inc...

During the Dry mode, you will need a garden hose (sold separately) to drain the condensate from the unit. Follow the steps below: Unscrew the drain cap of continuous drain outlet(Fig.20).Connect one end of the garden hose (sold separately) to the drain outlet then lead the other end into a drain tha...

Clean your air conditioner occasionally to keep it looking new. Be sure to unplug the unit before cleaning to prevent shock or fire hazards. To keep your air conditioner working efficiently, you should clean the filters every week of operation. This unit has two filters, they are filter A and B. Gra...

Major Appliance Limited Warranty failures. factory. 10200 David Taylor Drive