Page 2 - Frigidare; PRODUCT RECORD AND REGISTRATION; Serial plate locations; Visit the Frigidaire web site at www.frigidaire.com; Product Registration; Record model & serial numbers here
2 Thank you for choosing Frigidare . This Use & Care Guide is part of our commitment to customer satisfaction and product quality throughout the service life of your new appliance.We view your purchase as the beginning of a relationship. To ensure our ability to continue serving you, please use ...
Page 3 - Definitions; WARNING; IMPORTANT; Tip Over Hazard
3 Read all instructions before using this appliance. Do not attempt to install or operate your appliance until you have read the safety precautions in this manual. Safety items throughout this manual are labeled with a WARNING or CAUTION statement based on the risk type. Save these instructions for ...
Page 4 - IMPORTANT SAFETY INSTRUCTIONS; CAUTION; IMPORTANT INSTRUCTIONS FOR USING
4 IMPORTANT SAFETY INSTRUCTIONS CAUTION • Do not store items of interest to children in the cabinets above a range or on the backguard of the range. Children climbing on the range to reach items could be seriously injured. • Do not touch surface heating units or surface cooking elements, areas near ...
Page 6 - BEFORE SETTING OVEN CONTROLS
6 BEFORE SETTING OVEN CONTROLS Oven vent location The oven vent is located under the left rear surface element (See Fig. 1). When the oven is on, warm air passes through the vent. This venting is necessary for proper air circulation in the oven and good baking results. Do not block the oven vent. Fi...
Page 7 - Use proper cookware; BEFORE SETTING SURFACE CONTROLS; Surface indicator light; surface; Home Canning; Cookware material types
7 Use proper cookware Fig. 2 BEFORE SETTING SURFACE CONTROLS • Flat bottom and straight sides. • Tight fitting lids. • Weight of handle does not tilt cookware. Cookware is well balanced. • Cookware size matches the amount of food to be prepared and the size of the surface element. • Made of material...
Page 8 - SETTING SURFACE CONTROLS; Operating surface elements; NOTES; Suggested surface element settings
8 SETTING SURFACE CONTROLS Operating surface elements To operate surface elements: 1. Place correctly sized cooking utensil on surface element. 2. Push in and turn the surface control knob (See Fig. 1). in either direction to the desired setting. Start most surface cooking on a higher setting and th...
Page 9 - SETTING CLOCK & MINUTE TIMER; To set time of day; NOTE; will not; To set minute timer; clock
9 To cancel the minute timer before the minute timer isfinished Press timer on-off once. SETTING CLOCK & MINUTE TIMER To set time of day (some models) When the range is first plugged in, or when the power supply to the range has been interrupted, "12:00" will flash in the display window ...
Page 10 - Broil
10 SETTING OVEN CONTROLS Fig. 3 Fig. 4 NOTE Always pull the oven rack out to the stop position before turning or removing the food. Dark or dull pans absorb more heat than shiny bakeware resulting in dark or overbrowning of foods. It may be necessary to reduce the oven temperature or cook time to pr...
Page 11 - Cleaning recommendation table
11 • Surface elements and drip bowls CARE & CLEANING • Control panel • Decorative trim (some models) Surface type Recommendation • Oven interior & door liner • Porcelain enamel broiler pan and broiler pan insert (some models) For general cleaning, use hot, soapy water and a cloth. For more d...
Page 12 - Surface elements and drip bowls; Caution for aluminum use on the cooktop
12 CARE & CLEANING Terminal plug Terminal end Hold down clip (if equipped) Element support Allow element support to rest on drip pan inside rim. Surface elements and drip bowls To remove the surface elements and drip bowls 1. Lift the edge of the drip bowl across from the terminal end. Lift the ...
Page 13 - Replacing the oven light; Cleaning under lower element; Cleaning under cooktop
13 Replacing the oven light (some models) Be sure the range is unplugged and all parts are COOL before replacing oven light. Wear a leather-faced glove for protection against possible broken glass. CAUTION The interior oven light bulb is located at the upper left rear of the oven cavity. To replace ...
Page 14 - Removing and replacing the lift-off oven door; To remove oven door
14 CARE & CLEANING The oven door is heavy. For safe, temporary storage, lay the oven door flat with the inside of the door facing down. Removing and replacing the lift-off oven door CAUTION To remove oven door 1. Open oven door completely (horizontal with floor-Fig. 1). 2. Remove 2 screws locate...
Page 15 - Problem; • Solutions to common problems; BEFORE YOU CALL
15 Oven smokes excessively during broiling. • Incorrect setting. Follow broil instructions in Setting Oven Controls . • Make sure oven door is opened to broil stop position. • Meat too close to the broil element. Reposition the oven rack to provide proper clearance between the meat & the element...
Page 16 - MAJOR APPLIANCE WARRANTY; accordance with the provided instructions.
16 MAJOR APPLIANCE WARRANTY Your appliance is co vered by a one year limi ted warranty. For one year from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is...