Frigidaire Coin- Operated Commercial Tumble Action Washer- Manuals

Page 2 - Product Record; be ready to give the model number, serial; Model number; property damage, personal injury or loss of life.; WASHER SAFETY; DANGER; TABLE OF CONTENTS; The instructions appearing in this; START

2 Before beginning installation, carefully readthese instructions. This will simplify thei n s t a l l a t i o n a n d e n s u r e t h e w a s h e r i sinstalled correctly and safely. Leave thesei n s t r u c t i o n s n e a r t h e w a s h e r a f t e rinstallation for future reference. NOTE: The e...

Page 3 - Read all instructions before using this washer.; Important Safety Instructions; SAVE THESE INSTRUCTIONS

3 Grounding typewall receptacle Power supply cord with 3-prong grounding plug Do not underany circumstancescut, remove,or bypassthe grounding prongfrom this plug. Do not use or mix liquid chlorine bleach withother household chemicalssuch as toilet cleaners, rustremovers, acid or productscontaining a...

Page 4 - GROUNDING REQUIREMENTS; WATER SUPPLY REQUIREMENTS

4 GROUNDING REQUIREMENTS Improper connection of the equipment grounding conductor can result in a risk of electrical shock. Check with alicensed electrician if you are in doubt as to whether the applianceis properly grounded. 1. The washer MUST be grounded. In the event of malfunction or breakdown, ...

Page 6 - UNPACKING; BOLT; INSTALLATION; Do not

6 UNPACKING 1. Cut the shipping carton along the dotted line along the baseof the unit. 2. While in the carton carefully lay the washer on its backside. 3. Removethe styrofoam base. 4. Carefully return the washer to an upright position and removethe carton. 5. Carefully move the washer to within 4 f...

Page 7 - COIN BOX ADJUSTMENT

7 Cable Tie FIGURE 2 5. On machines equipped with drain pump, forma U shape on the end of the drain hose, withthe hose pointed toward the drain. NOTE: If the drain hose is placed in a standpipe without forming a U shape, a siphoning actioncould occur. There must be an air gap aroundthe drain hose. A...

Page 8 - Be sure block-out keys and /or dime inserts are

8 8 (2) Slide Stop Screws FIGURE 3 (1) Receiver Block Screw Spare Parts Compartment and Screw Coin Receiver Block FIGURE 4 FIGURE 5 FIGURE 6 NOTE: Blackcoloredslots areclosed offby block-out key. • Pull coin slide out of coin chute (see FIGURE 4). STEP 4 Turn coin slide upside down and remove screw ...

Page 9 - Meter Case Instructions; NSTRUCTIONS TO CHANGE THE NUMBER OF COIN SLIDE

9 Anti-Cheat Gate (2) Upper Coin Chute Cover Screws FIGURE 9 9 (2) Coin Sizing Block Screws Coin Sizing Block FIGURE 10 Change coin sizing block: • Remove two screws that hold upper coin chute cover. Remove cover (see FIGURE 9). • Remove two screws that hold coin sizing block to upper coin chute cov...

Page 10 - Parts List for series 7682 “Quick-Change” Start Mechanism; EPLACEMENT PARTS; MUST

10 ITEM REQ’D PART NO DESCRIPTION 1 2 00-7185 #4-40 SELF-TAPPING SC. 2 1 76-6009-* TIMER MOTOR ASS’Y 3 1 76-1037 SWITCH & BRACKET SUB-ASS’Y 4 1 76-5014 DRIVE SELEEVE 5 1 76-2033 SLEEVE 6 1 00-8149 TORSION SPRING 7 3 00-7070 RETAINING RING 8 2 76-5013 DRIVE BUSHING 9 1 00-8003 SPRING 10 1 76-1036...

Page 11 - V8 Coin Chute Parts List

11 20-3020 20-3000 11 V8 Parts List DESCRIPTION REQ . 20-3020 20-3000 ————————————————————————————1 SCREW (METRIC) 2 00-9724 00-7924————————————————————————————2 SCREW (METRIC) 2 00-7938 00-7938————————————————————————————3 TOP HOUSING 1 20-3019 20-3002————————————————————————————4 SHIM 2 20-2042 --...

Page 12 - To change vend price, detach and mail the lower portion to:; Customer Service Department; The coin chute has been pre-set at the factory.; COMMERCIAL APPLIANCE WARANTY INFORMATION

12 NEW VEND PRICE ____________________________________________________________ Order Form To change vend price, detach and mail the lower portion to: Customer Service Department Greenwald Industries Inc. 212 Middlesex Ave. Chester, CT 06412 ____________________________________________________ The co...