Frigidaire 316495063- Manuals

Frigidaire 316495063– Manual in PDF format online.

Manuals:

Manual

Manual Frigidaire 316495063

Summary

Page 2 - Before You Use Your Microwave; CONTENTS; General information; Installation Instructions

2 Before You Use Your Microwave CONTENTS General information Important Safety Instructions .................................. 3 Electrical Requirements .......................................... 3 Damage – Shipment/Installation.............................. 4 Parts Included.............................

Page 4 - If the unit is damaged in shipment,; If the unit is damaged by the customer,; If the unit is damaged by the installer; HARDWARE PACKET; PARTS INCLUDED; ADDITIONAL PARTS

PART QUANTITY Wood Screws 2 ( 1 ⁄ 4 “ x 2“) Toggle Bolts (and 4 wing nuts) ( 3 ⁄ 16 “ x 3“) Self-Aligning Machine 3 Screws ( 1 ⁄ 4 “-28 x 3 1 ⁄ 4 “) Nylon Grommet 2 (for metal cabinets) Power Cord Strap 1 (plastic) • If the unit is damaged in shipment, return the unit to the store in which it was bo...

Page 5 - TOOLS YOU WILL NEED; MOUNTING SPACE

TOOLS YOU WILL NEED # 1 Phillips screwdriver Pencil Ruler or tape measure andstraight edge Carpenter square(optional) Tin snips (for cuttingdamper, if required) Electric drill with 3 ⁄ 16 “ , 1 ⁄ 2 “ and 5 ⁄ 8 “ drill bits Hammer (optional) Stud finder or Filler blocks or scrapwood pieces, if needed...

Page 6 - OR; FINDING THE WALL STUDS; PLACEMENT OF THE MOUNTING PLATE; the Styrofoam protecting the front of the oven.

Find the studs, using one of the following methods:A. Stud finder – a magnetic device which locates nails. OR B. Use a hammer to tap lightly across the mounting surface to find a solid sound. This will indicate a stud location. After locating the stud(s), find the center by probing the wall with a s...

Page 7 - DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET

DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET C. Your cabinets may have decorative trim that interferes with the microwave installation. Remove the decorative trim to install the microwave properlyand to make it level. THE MICROWAVE MUST BE LEVEL.Use a level to make sure the cabinet bottom is l...

Page 8 - ALIGNING THE WALL PLATE; mounted firmly in a stud to support the weight; Set the mounting plate aside.

ALIGNING THE WALL PLATE Draw a vertical line on the wall at the center of the 30 ″ (76.2 cm) wide space. Use the mounting plate as the template for the rearwall. Place the mounting plate on the wall, making sure that the tabs are touching the bottom of the cabinet or the level line drawn in Step C f...

Page 9 - INSTALLATION TYPES

A INSTALLATION TYPES This microwave oven is designed for adaptation to the following three types of ventilation: A. Outside Top Exhaust (Vertical Duct)B. Outside Back Exhaust (Horizontal Duct)C. Recirculating (Non-Vented Ductless) proceed to that section. OUTSIDE TOP EXHAUST(VERTICAL DUCT) OUTSIDE B...

Page 10 - HOOD EXHAUST; Total Length

EQUIVALENT NUMBER EQUIVALENT DUCT PIECES LENGTH x USED = LENGTH Roof Cap 24 Ft. (7.3 m) x (1) = 24 Ft. (7.3 m) 12 Ft. (3.6 m) Straight Duct 12 Ft. (3.6 m) x (1) = 12 Ft. (3.6 m) (6”/15.2 cm Round) Rectangular-to-Round 5 Ft. (1.5 m) x (1) = 5 Ft. (1.5 m) Transition Adaptor* Equivalent lengths of duct...

Page 11 - Total Ductwork; Maximum duct length:

EQUIVALENT NUMBER EQUIVALENT DUCT PIECES LENGTH x USED = LENGTH Rectangular-to-Round 5 Ft. (1.5 m) x ( ) = Ft. or m Transition Adaptor* Wall Cap 40 Ft. (12.2 m) x ( ) = Ft. or m 90° Elbow 10 Ft. (3 m) x ( ) = Ft. or m 45° Elbow 5 Ft. (1.5 m) x ( ) = Ft. or m 90° Elbow 25 Ft. (7.6 m) x ( ) = Ft. or m...

Page 12 - INSTALLATION OVERVIEW

Place the mounting plate against the wall andinsert the toggle wings into the holes in the wall to mount the plate. NOTE: Before tightening toggle bolts and wood screw, make sure the tabs on the mounting platetouch the bottom of the cabinet when pushed flush against the wall and that the plate is pr...

Page 13 - EXHAUST

13 USE TOP CABINET TEMPLATEFOR PREPARATION OF TOPCABINET You need to drill holes for the top support screws, ahole large enough for the power cord to fit through,and a cutout large enough for the exhaust adaptor. A2. • Read the instructions on the TOP CABINET TEMPLATE. • Tape it underneath the top c...

Page 15 - CONNECTING DUCTWORK; for high temperature applications.

4 Attach the microwave oven to the top cabinet. 8 7 6 Cabinet Front Cabinet Bottom Shelf Tighten the outer two screws to the top of themicrowave oven. (While tightening screws, holdthe microwave oven in place against the wall andthe top cabinet.) Filler Block Microwave Oven Top Equivalent to Depth o...

Page 16 - REMOVE BLOWER PLATE

INSTALLATION OVERVIEW B1. Prepare Rear Wall B3. Attach Mounting Plate to Wall B4. Prepare Top Cabinet B5. Adjust Blower B6. Mount the Microwave Oven IMPORTANT NOTES: • Make sure the screws for the blower motor and blower plate are securely tightened when they are reinstalled. This will help to preve...

Page 17 - USE TOP CABINET TEMPLATE

ATTACH THE MOUNTINGPLATE TO THE WALL B3. USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET B4. • Read the instructions on the TOP CABINETTEMPLATE. • Tape it underneath the top cabinet. • Drill the holes, following the instructions on theTOP CABINET TEMPLATE. CAUTION: Wear safety goggles when d...

Page 19 - IMPORTANT: If filler blocks are not

Attach the microwave oven to the top cabinet. Installation Instructions 3 MOUNT THE MICROWAVEOVEN B6. FOR EASIER INSTALLATION AND PERSONALSAFETY, WE RECOMMEND THAT TWO PEOPLEINSTALL THIS MICROWAVE OVEN. IMPORTANT: Do not grip or use handleduring installation. NOTE: If your cabinet is metal, use the ...

Page 20 - RECIRCULATING

USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET C2. INSTALLATION OVERVIEW C1. Attach Mounting Plate to Wall C2. Prepare Top Cabinet C4.C5. Mount the Microwave Oven IMPORTANT NOTES: • Make sure the screws for the blower motor and blowerplate are securely tightened when they are reinstalled.Th...

Page 21 - IMPORTANT: If filler blocks are not used,; CHECK BLOWER PLATE

Attach the microwave oven to the top cabinet. Cabinet Front Cabinet Bottom Shelf Filler Block Microwave Oven Top Equivalent to Depthof Cabinet Recess Installation Instructions 3 MOUNT THE MICROWAVEOVEN FOR EASIER INSTALLATION AND PERSONALSAFETY, WE RECOMMEND THAT TWO PEOPLEINSTALL THIS MICROWAVE OVE...

Page 22 - C5. INSTALLING OR CHANGE

5 MOUNT THE MICROWAVEOVEN (cont.) Installation Instructions 8 7 6 Tighten the outer two screws to the top of themicrowave oven. (While tightening screws, holdthe microwave oven in place against the wall andthe top cabinet.) Insert 2 self-aligning screwsthrough outer top cabinetholes. Turn two full t...

Page 23 - BEFORE YOU USE YOUR MICROWAVE; DDDDDDD; REGIS

KEEP INSTALLATION INSTRUCTIONSFOR THE LOCAL INSPECTOR’SUSE. Plug power cord into a dedicated 15- to 20-ampelectrical outlet. 7. 6. Replace house fuse or turn breaker back on. 4. Remove all packing material from the microwave oven. 2. Make sure the microwave oven has beeninstalled according to instru...