Page 4 - MOUNTING THE BUILT-IN COOKTOP
21 MOUNTING THE BUILT-IN COOKTOP Caution ! • To avoid any possible hazard, the appliance may be installed by qualified personnel only. • Panels and furniture lining of the kitchen cabinet receiving the hob must be treated with temperature resistant adhesives 100°C (otherwise they might be discoloure...
Page 6 - TECNICAL INFORMATION; Electronic sensors; P= extra powerful setting
23 TECNICAL INFORMATION Type 7372241 Width 590 mm Electrical connection 230-240 V~ or 400-415 V 2N~, 50/60 Hz Working voltage 230-240 V~, 50/60 Hz Type of switch Electronic sensors Cooking zones ( Ø, mm/W ) Forward left Rear left Rear right Forward right 210 , 1500 (P=2000) 145 , 1200 (P=1600) 210 ,...
Page 7 - Hotplate may be damaged if:; Power regulation; Purpose
24 you place smaller dish upon the hotplate and it is recognized, the hotplate will only use the amount of energy required to heat the dish according to its size. Hotplate may be damaged if: • it is turned on and left empty, or an empty dish is placed on it; • you use clay dishes which leave scratch...
Page 8 - INDUCTION COOKTOP; Hob control elements
25 INDUCTION COOKTOP 1.Induction hotplate front left 2.Induction hotplate rear left 3.Induction hotplate rear right 4.Induction hotplate front right 5.Hob control panel Hob control elements A. Keys (+ e -) to increase/decrease power level of cooking zone 1 B. Keys (+ e -) to increase/decrease power ...
Page 9 - Booster function; Activating the Booster function; minutes and then returns to level; Cancelling the Booster function; Key lock; Initial default setting of the timer
26 Pan sensor Each burner is complete with its own sensor for detecting the presence of a pan. The system is fine-adjusted to recognize the presence of a pan that, according to the scale of the EN standards, is one size smaller than the nominal diameter of the burner. If the hotplate fails to detect...
Page 10 - seconds to select the heater, the timer will switch off.; Automatic safety off; Level
27 timer can only operate on one heater each time. The heater must always be selected (the display must be viewed “0”) before the time is set; otherwise, the timer will switch off. If we take longer than 10 seconds to select the heater, the timer will switch off. If, after selecting the heater, the ...
Page 11 - Protection against overheating; General off
28 change the level, the safety mechanism will switch the hotplate off after 10 hours. Protection against overheating Induction cooktop is also fitted with safety device against overheating which protects electronic parts from damages. This device operates on several levels. When cooking zone’s temp...
Page 12 - The sequence to set a new Cooktop Power Limit is:; During the first 30 seconds after plugging the appliance; For selecting a new Power Limit:; If during
29 Power management for a Limited Power Cooktop (ECO) The sequence to set a new Cooktop Power Limit is: ▪ During the first 30 seconds after plugging the appliance ▪ The Touch has to be unlocked and all Heaters Off ▪ Push at the same time (A+,A-,D-,D+) keys ▪ Once this is done, a beep sounds and “Po”...
Page 13 - Safety functions and error display.
30 Safety functions and error display. ERROR CODE ERROR DESCRIPTION INSTRUCTION MANUAL FA Anomaly of infrared signal, of on/off key - all cooking zones are deactivated CONTACT AUTHORIZED CENTER FOR TECHNICAL ASSISTANCE - SPECIFYING THE ERROR CODE FC Receiver infrared anomaly of button on/off - all c...
Page 14 - CLEANING AND MAINTENANCE OF COOKTOP
31 zones are deactivated an error is visualised on all displays FOR TECHNICAL ASSISTANCE - SPECIFYING THE ERROR CODE F4 Opening of NTC - all cooking zones are deactivated an error is visualised on all displays CONTACT AUTHORIZED CENTER FOR TECHNICAL ASSISTANCE - SPECIFYING THE ERROR CODE F6 Tension ...
Page 15 - Foster; spa
Foster spa 42041 Brescello (RE) - Italy tel. +39.0522.687425 - tel. Servizio Assistenza +39.0522.684450 fax +39.0522.686019 - fax Servizio Ricambi +39.0522.962166 e-mail: [email protected] www.fosterspa.com .