Ford 2015 Taurus- Manuals

be accessed electronically by Ford Motor Company and Ford authorizedservice facilities, and that the diagnostic information may be used for anypurpose. See the SYNC® chapter for more information. Event Data Recording This vehicle is equipped with an event data recorder (EDR). Themain purpose of an E...

authorities or other third parties acting with lawful authority.Other parties may seek to access the information independentlyof Ford Motor Company and Ford of Canada. Note: Including to the extent that any law pertaining to EventData Recorders applies to SYNC® or its features, please note thefollow...

FORD CREDIT (U.S. ONLY) Ford Credit offers a full range of financing and lease plans to help youacquire your vehicle. If you have financed or leased your vehicle throughFord Credit, thank you for your business. For your convenience, we offer a number of ways to contact us, as wellas help manage your...

SPECIAL NOTICES New Vehicle Limited Warranty For a detailed description of what is covered and what is not covered byyour vehicle’s New Vehicle Limited Warranty, see the warrantyinformation that is provided to you along with your owner’s manual. Special Instructions For your added safety, your vehic...

GENERAL INFORMATION See the following sections for directions on how to properly use safetyrestraints for children. WARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be bought separately from your v...

Recommendations for Safety Restraints for Children Child size, height, weight, or age Recommendedrestraint type Infantsortoddlers Children weighing 40 lb (18 kg) or less(generally age four or younger). Use a child safety seat(sometimes called aninfant carrier,convertible seat, ortoddler seat). Small...

CHILD SEAT POSITIONING WARNING: Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move thevehicle seat upon which the child seat is installed all the way back.When poss...

WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the riskof injury or death in a crash. WARNING: To avoid risk of injury, do not leave children or pets unattende...

BOOSTER SEATS WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the riskof injury or death in a crash. Use a belt-positioning booster seat for children who have o...

Types of Booster Seats • Backless booster seats If your backless booster seat has a removable shield, remove the shield.If a vehicle seating position has a low seatback or no head restraint, abackless booster seat may place your child’s head (as measured at thetops of the ears) above the top of the ...

• Keep the buckle release button pointing up and away from the safetyseat, with the tongue between the child seat and the release button,to prevent accidental unbuckling. • Place the vehicle seat upon which the child seat will be installed inthe upright position. • Put the safety belt in the automat...

3. While holding the shoulder andlap belt portions together, route thetongue through the child seataccording to the child seatmanufacturer’s instructions. Be surethe belt webbing is not twisted. 4. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingf...

Using Lower Anchors and Tethers for CHildren (LATCH) WARNING: Never attach two child safety seats to the same anchor. In a crash, one anchor may not be strong enough to hold two child safety seat attachments and may break, causing serious injuryor death. WARNING: Depending on where you secure a chil...

Using Tether Straps Many forward-facing child safety seats include a tether strapwhich extends from the back of the child safety seat and hooksto an anchoring point called the top tether anchor. Tether straps are available as an accessory for many older safety seats. Contact the manufacturer of your...

CHILD SAFETY LOCKS The childproof locks are located on the rear edge of each rear door andmust be set separately for each door. When these locks are set, the reardoors cannot be opened from theinside. • Insert the key and turn to thelock position (key horizontal) toengage the childproof locks. • Ins...

PRINCIPLES OF OPERATION WARNING: Never let a passenger hold a child on his or her lap while your vehicle is moving. The passenger cannot protect the child from injury in a crash, which may result in serious injury or death. WARNING: Do not allow people to travel in any area of your vehicle that does...

FASTENING THE SAFETY BELTS The front outboard and rear safety restraints in your vehicle arecombination lap and shoulder belts. 1. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) until you hear a snap and feelit latch. Make sure the tongue i...

Pregnant women should alwayswear their safety belts. The lap beltportion of a combination lap andshoulder belt should be positionedlow across the hips below the bellyand worn as tight as comfort willallow. The shoulder belt should bepositioned to cross the middle ofthe shoulder and the center of the...

Automatic Locking Mode In this mode, the shoulder belt is automatically pre-locked. The belt willstill retract to remove any slack in the shoulder belt. The automaticlocking mode is not available on the driver safety belt. When to Use the Automatic Locking Mode This mode should be used any time a ch...

SAFETY BELT HEIGHT ADJUSTMENT WARNING: Position the safety belt height adjusters so that the belt rests across the middle of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness of the safety beltand increase the risk of injury in a crash. Adjust the height of the...

CHILD RESTRAINT AND SAFETY BELT MAINTENANCE Inspect the vehicle safety belts and child safety seat systems periodicallyto make sure they work properly and are not damaged. Inspect thevehicle and child seat safety belts to make sure there are no nicks, tearsor cuts. Replace if necessary. All vehicle ...

PERSONAL SAFETY SYSTEM™ The Personal Safety System provides an improved overall level of frontalcrash protection to front seat occupants and is designed to help furtherreduce the risk of airbag-related injuries. The system is able to analyzedifferent occupant conditions and crash severity before act...

The airbags are a supplemental restraint system and are designed towork with the safety belts to help protect the driver and right frontpassenger from certain upper body injuries. Airbags do not inflate slowly;there is a risk of injury from a deploying airbag. Note: You will hear a loud bang and see...

DRIVER AND PASSENGER AIRBAGS WARNING: Never place your arm or any objects over an airbag module. Placing your arm over a deploying airbag can result in serious arm fractures or other injuries. Objects placed on or over theairbag inflation area may cause those objects to be propelled by theairbag int...

Proper Driver and Front Passenger Seating Adjustment WARNING: The National Highway Traffic Safety Administration recommends a minimum distance of at least 10 inches (25 centimeters) between an occupant’s chest and the driver airbagmodule. To properly position yourself away from the airbag: • Move yo...

FRONT PASSENGER SENSING SYSTEM WARNING: Even with Advanced Restraints Systems, children 12 and under should be properly restrained in a rear seating position. Failure to follow this could seriously increase the risk of injury or death. WARNING: Sitting improperly out of position or with the seat bac...

Note: When the ignition is first turned on, the passenger airbag status indicator OFF and ON lamps will illuminate for a short period of time toconfirm it is functional. The front passenger sensing system is designed to disable (will notinflate) the front passenger’s frontal airbag when the front pa...

Make sure the front passenger sensing system is operatingproperly. See Crash Sensors and Airbag Indicator later in this chapter. If the airbag readiness light is lit, do the following: The driver and adult passengers should check for objects lodgedunderneath the front passenger seat, or cargo interf...

SAFETY CANOPY™ CURTAIN AIRBAGS WARNING: Do not place objects or mount equipment on or near the headliner at the siderail that may come into contact with a deploying curtain airbag. Failure to follow these instructions mayincrease the risk of personal injury in the event of a crash. WARNING: Do not l...

CRASH SENSORS AND AIRBAG INDICATOR WARNING: Modifying or adding equipment to the front end of your vehicle (including frame, bumper, front end body structure and tow hooks) may affect the performance of the airbag system,increasing the risk of injury. Do not modify the front end of yourvehicle. Your...

The fact that the safety belt pretensioners or airbags did not activate forboth front seat occupants in a crash does not mean that something iswrong with the system. Rather, it means the restraints control moduledetermined the accident conditions (such as crash severity, belt usage)were not appropri...

GENERAL INFORMATION ON RADIO FREQUENCIES This device complies with part 15 of the FCC Rules and with IndustryCanada license-exempt RSS standard(s). Operation is subject to thefollowing two conditions: (1) This device may not cause harmfulinterference, and (2) This device must accept any interference...

REMOTE CONTROL Integrated Keyhead Transmitters (IKTs) (If Equipped) Use the key blade to start yourvehicle and unlock or lock thedriver door from outside yourvehicle. The transmitter portionfunctions as the remote control. Note: Your vehicle’s keys came with a security label that providesimportant k...

Note: Your vehicle’s back-up keys came with a security tag thatprovides important key cutinformation. Keep the tag in a safeplace for future reference. Replacing the Battery Note: Refer to local regulations when disposing of transmitter batteries. Note: Do not wipe off any grease on the battery term...

Programming Memory to the Remote Control A. Type 1 B. Type 2 1. Turn the ignition on. 2. Move the memory features to the desired positions using theassociated controls, located on the side seat panels. 3. Press and hold button 1 for five seconds. A tone will sound in about two seconds. Continue to h...

Sounding a Panic Alarm Press the button to activate the alarm. Press the button againor switch the ignition on to deactivate. Note: The panic alarm will only operate when the ignition is off. Remote Start (If Equipped) WARNING: To avoid exhaust fumes, do not use remote start if your vehicle is parke...

Turning the Vehicle Off After Remote Starting Press the button once. The parking lamps will turn off. You may have to be closer to your vehicle than when starting due toground reflection and the added noise of the running vehicle. You can disable or enable the remote start system through theinformat...

PRINCIPLES OF OPERATION MyKey allows you to program keys with restricted driving modes topromote good driving habits. All but one of the keys programmed to thevehicle can be activated with these restricted modes. Any keys that have not been programmed are referred to asadministrator keys or admin ke...

• Vehicle speed minders of 45, 55 or 65 mph (75, 90 or 105 km/h). Onceyou select a speed, it will be shown in the display, followed by anaudible tone when the preselected vehicle speed is exceeded. • Audio system maximum volume of 45%. A message will be shown in thedisplay when you attempt to exceed...

LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lockand unlock your vehicle. Power Door Locks The power door lock control is located on the driver and front passengerdoor panels. A. Unlock B. Lock Remote Control You can use the remote control anytime your vehic...

Locking the Doors Press the button to lock all the doors. The turn signals willilluminate. Press the button again within three seconds to confirm that all the doorsare closed. The doors will lock again, the horn will sound and the turnsignals will illuminate if all the doors and the luggage compartm...

Smart Unlocks for Integrated Keyhead Transmitter This feature helps to prevent you from locking yourself out of yourvehicle if your key is still in the ignition. When you open one of the front doors and lock your vehicle with thepower door lock control, all the doors will lock then unlock if your ke...

Autolock Feature (If Enabled) The autolock feature will lock all the doors when: • all the doors are closed, • the ignition is on, • you shift into any gear putting your vehicle in motion, and • your vehicle reaches a speed greater than 12 mph (20 km/h). The autolock feature repeats when: • you open...

You may also program a personal entry code through the MyFord Touchor MyLincoln Touch system. Refer to the MyFord Touch or MyLincoln Touch chapter. Tips: • Do not set a code that uses five of the same number. • Do not use five numbers in sequential order. • The factory-set code will work even if you...

Displaying the Factory-Set Code With Integrated Keyhead Transmitters Note: You will need to have two programmed passive anti-theft keys for this procedure. To display the factory-set code in the information display: 1. Place the first programmed key into the ignition and switch on theignition. 2. Sw...

INTERIOR LUGGAGE COMPARTMENT RELEASE WARNING: Keep vehicle doors and luggage compartment locked and keep keys and remote transmitters out of a child’s reach. Unsupervised children could lock themselves in the trunk and riskinjury. Children should be taught not to play in vehicles. WARNING: Do not le...

ADJUSTING THE STEERING WHEEL WARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position in the Seats chapter. 1. Unlock the steering column. 2. Adjust the steering wheel to thedesired positi...

AUDIO CONTROL SEEK: Press to select the next or previous stored preset or track.Press and hold to select the next orprevious frequency or seek througha track. MEDIA: Press repeatedly to scroll through available audio modes. MUTE: Press to silence the radio. VOL (Volume): Press to increase or decreas...

CRUISE CONTROL Type 1 Type 2 See the Cruise Control chapter for information on this feature. INFORMATION DISPLAY CONTROL See the Information Displays chapter for more information. SET RES CNCL ON OFF GAP 84 Steering Wheel 2015 TaurusOwners Guide gf, 1st Printing, April 2014USA (fus)

Cluster Display Control Features If equipped with: MyFord system: This control functions the same as the centercontrol on the faceplate. See MyFord system in the Audio Systems chapter. MyFord Touch: Use this control to adjust the right side of the cluster display. Navigate through the screen and pre...

ADJUSTABLE PEDALS (IF EQUIPPED) WARNING: Never adjust the accelerator and brake pedal with feet on the pedals while the vehicle is moving. The control is located on the left side of the steering column. Press andhold the appropriate control to move the pedals. A. Farther B. Closer The pedal position...

WINDSHIELD WIPERS Note: Fully defrost the windshield before switching on the windshield wipers. Note: Make sure you switch off the windshield wipers before entering a car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears. If that does not resolve the issue, i...

WINDSHIELD WASHERS Note: Do not operate the wipers on a dry windshield. This may scratch the glass, damage the wiper blades or cause the wiper motor to burn out.Always use the windshield washer before wiping a dry windshield. Note: Do not operate the washer when the washer reservoir is empty. This m...

LIGHTING CONTROL A. Off B. Parking lamps, instrument panellamps, license plate lamps and taillamps C. Headlamps High Beams • Push the lever toward theinstrument panel to activate. • Push the lever toward theinstrument panel again or pullthe lever towards you todeactivate. Headlamp Flasher • Pull tow...

AUTOLAMPS WARNING: The daytime running lamps system does not activate the tail lamps and may not provide adequate lighting during low visibility driving conditions. Also, the autolamps switch position may notactivate the headlamps in all low visibility conditions, such as daytimefog. Always ensure t...

INSTRUMENT LIGHTING DIMMER • Tap the top or bottom of thecontrol to brighten or dim allinterior lit componentsincrementally. • Press and hold the top of thecontrol to activate the “dome on”feature. This will turn on theinterior courtesy lights. Fully press and hold the bottom of the control to turn ...

DAYTIME RUNNING LAMPS (IF EQUIPPED) WARNING: Always remember to turn on your headlamps at dusk or during inclement weather. The Daytime Running Lamp (DRL) system does not activate the tail lamps and generally may notprovide adequate lighting during these conditions. Failure to activateyour headlamps...

A camera sensor is centrally mounted behind the windshield of thevehicle, and monitors the conditions to decide when to switch the highbeams off and on. Once the system is active the high beams will switch on if: • The ambient light level is low enough that high beams are needed. • There is no traff...

Manually overriding the system When the automatic control hasactivated high beams, pushing orpulling the stalk will provide atemporary override to low beam. To permanently deactivate the system use the information display menuor turn the lighting control switch from autolamps to headlamps. DIRECTION...

INTERIOR LAMPS Front row map lamps The map lamps are located on theoverhead console. Press the outeredge of the clear lens to turn on thelamps. The map lamps also lightwhen: • any door is opened. • the instrument panel dimmer button is pressed until the courtesy lamp comes on. • the remote entry con...

POWER WINDOWS WARNING: Do not leave children unattended in your vehicle and do not let children play with the power windows. They may seriously injure themselves. WARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in ...

Bounce-Back (One-Touch Up or Down Windows Only) The window stops automatically while closing and reverse some distanceif there is an obstacle in the way. Overriding the Bounce-Back Feature WARNING: When you override the bounce-back feature the window will not reverse if it detects an obstacle. Take ...

EXTERIOR MIRRORS Power Exterior Mirrors WARNING: Do not adjust the mirror while your vehicle is in motion. A. Left mirror B. Adjustment control C. Right mirror To adjust your mirrors: 1. Press the button to select the mirror you want to adjust. An indicatorlight on the button will illuminate. 2. Use...

Integrated Blind Spot Mirrors (If Equipped) WARNING: Objects in the blind spot mirror are closer than they appear. Blind spot mirrors have an integrated convex mirror built into the upperoutboard corner of the exterior mirrors. They are designed to assist youby increasing visibility along the side o...

INTERIOR MIRROR WARNING: Do not adjust the mirror when your vehicle is moving. Note: Do not clean the housing or glass of any mirror with harsh abrasives, fuel or other petroleum or ammonia based cleaning products. You can adjust the interior mirror to your preference. Some mirrors alsohave a second...

Illuminated Visor Vanity Mirror Lift the cover to switch on thelamp. SUNSHADE (IF EQUIPPED) The power rear sunshade covers the rear window of the vehicle. The control is located in the centerconsole access bin. Press the control to move the sunshade up or down. Note: Do not try to manually move the ...

GAUGES Type 1 Cluster shown in standard measure – metric clusters similar. A. Tachometer B. Information display. See Information displays for more information. C. Speedometer D. Fuel gauge Fuel Gauge Note: The fuel gauge may vary slightly when your vehicle is moving or on a gradient. Switch the igni...

• The fuel amount dispensed into the tank is a little less or more thanthe gauge indicated. This is normal and depends upon the slope ofpavement at the gas station. • If the gas station nozzle shuts off before the tank is full, try a differentgas pump nozzle. Low Fuel Reminder A low fuel reminder tr...

WARNING LAMPS AND INDICATORS These indicators can alert you to a vehicle condition that may becomeserious enough to cause expensive repairs. Many lights will illuminatewhen you start your vehicle to make sure they work. If any light remainson after starting the vehicle, refer to the respective syste...

Brake system warning light To confirm the brake system warning light is functional, it willmomentarily illuminate when the ignition is turned to the onposition when the engine is not running, or in a position between on and start, or by applying the parking brake when the ignitionis turned to the on...

Grade assist (if equipped) (RTT) Illuminates when grade assist is turned on. Heads up display (if equipped) A red beam of lights will illuminate on the windshield in certaininstances when using adaptive cruise control and/or thecollision warning system. It will also illuminate momentarily when you s...

Safety belt Reminds you to fasten your safety belt. A Belt-Minder® chimewill also sound to remind you to fasten your safety belt. Service engine soon The service engine soon indicator light illuminates when the ignition is first turned to the on position to check the bulb andto indicate whether the ...

GENERAL INFORMATION WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We recommend...

Menu You can access the menus using the information display control. Note: Some options may appear slightly different or not at all if the items are optional. †Trip 1 & 2 Trip Odometer Hold OK to Reset Trip Timer Average Fuel Compass (located in lower line of display). Note: this will also displ...

Settings Driver Assist Traction Control — check enabled (default) /uncheck disabled Blind Spot — check enabled (default) / uncheckdisabled Collision Warning Sensitivity High, Normal orLow Chimes (not selectable if using aMyKey) Warning (not selectable if using aMyKey) Cross Traffic — check enabled (...

Settings MyKey Create MyKey Hold OK to Create MyKey 911 Assist Always On or User Selectable Traction Control Always On or User Selectable Max Speed 80 MPH (130 km/h) or Off Speed Minder 45 mph (75 km/h), 55 mph(90 km/h), 65 mph (105 km/h) orOff Volume Limiter Clear MyKeys Hold OK to Clear MyKeys TRI...

Information Display Controls (Type 2) • Press the up and down arrowbuttons to scroll through andhighlight the options within amenu. • Press the right arrow button toenter a sub-menu. • Press the left arrow button toexit a menu. • Press the OK button to choose and confirm a setting/messages. Main men...

Driver Assist In this mode, you can configure different driver setting choices. Note: Some items are optional and may not appear. Driver Assist Traction Ctrl — check enabled (default) / uncheck disabled Blindspot — check enabled (default) / uncheck disabled Collision Warn Sensitivity High / Normal /...

INFORMATION MESSAGES Note: Depending on the vehicle options equipped with your vehicle, not all of the messages will display or be available. Certain messages may beabbreviated or shortened depending upon which cluster type you have. Press the OK button toacknowledge and remove somemessages from the...

Alarm/Security Messages Action / Description Vehicle Alarm To StopAlarm, Start Vehicle Displayed when the perimeter alarm system isarmed and the vehicle is entered using the keyon the driver’s side door. In order to preventthe perimeter alarm system from triggering,the ignition must be turned to sta...

AWD Messages Action / Description Change AWD PowerTransfer Unit Lube Displayed when the AWD system needs itspower transfer unit lubrication changed. Thismessage may be set if a vehicle hasexperienced extended periods ofextreme/severe duty cycle driving. See yourauthorized dealer for service. (Taurus...

BLIS® Messages Action / Description Blindspot NotAvailable SensorBlocked See Manual Displayed when the blind spot informationsystem/cross traffic alert system sensors areblocked. Driver can typically clean the sensorto resolve. Blindspot System Fault Displayed when a fault with the blind spot inform...

Collision Warning System Messages Action / Description Collision Warning NotAvailable Displayed when there is a system malfunctionwith the collision warning system. The systemwill be disabled. Contact your authorizeddealer as soon as possible. Collision Warning NotAvailable SensorBlocked See Manual ...

Lane Keeping System Messages Action / Description Lane keeping Sys.Malfunction Servicerequired The system has malfunctioned. Contact yourauthorized dealer as soon as possible. Front CameraTemporarily NotAvailable The system has detected a condition that hascaused the system to be temporarilyunavaila...

Passenger Sensing System Message Action / Description Occupant SensorBLOCKED RemoveObjects NearPassenger Seat Displayed when objects are by the passengerseat. After the objects are moved away fromthe seat, if the warning stays on or continuesto come on contact your authorized dealer assoon as possib...

MANUAL CLIMATE CONTROL A. Fan speed control: Controls the volume of air circulated in your vehicle. Adjust to select the desired fan speed. B. Defrost: Press the button to distribute air to the windshield vents and de-mister. Air distribution to instrument panel and footwell ventsturn off. You can u...

G. MAX A/C: Press the button to maximize cooling. Recirculated air flows through the instrument panel vents, air conditioning automaticallyturns on, and the fan automatically adjusts to the highest speed. H. Air distribution control: Press these buttons to turn airflow from the windshield, instrumen...

desired temperature. You can also use the AUTO button to turn off dual zone operation by pressing and holding the button for more than twoseconds. C. Air distribution control: Press these buttons to turn airflow from the windshield, instrument panel, or footwell vents on or off. The systemcan distri...

AUTOMATIC CLIMATE CONTROL (WITH SONY® AUDIO SYSTEM) Note: You can switch temperature units between Fahrenheit and Celsius. See Menu features in the MyFord Touch or MyLincoln Touch chapter. A. Defrost: Press the button to distribute air to the windshield vents and de-mister. Air distribution to instr...

E. A/C: Press the button to turn air conditioning compressor on or off. Use air conditioning with recirculated air to improve cooling performanceand efficiency. F. MAX A/C: Press the button to maximize cooling. Recirculated air flows through the instrument panel vents, air conditioning automatically...

AUTOMATIC CLIMATE CONTROL (WITH MyTemp) Note: You can switch temperature units between Fahrenheit and Celsius. See Settings in the MyFord Touch or MyLincoln Touch chapter. A. MyTemp: Allows you to quickly adjust to a frequently used setting with a single touch.Press + or - to increase and decrease t...

E. MAX A/C: Press the button to maximize cooling. Recirculated air flows through the instrument panel vents, air conditioning automaticallyturns on, and the fan automatically adjusts to the highest speed. F. A/C: Press the button to turn air conditioning compressor on or off. Use air conditioning wi...

Recommended Settings for Heating Vehicles with manual climate control Vehicles with automatic climate control 1 Adjust the fan speed to thecenter setting. Press the AUTO button. 2 Adjust the temperature controlto the midway point of the hotsettings. Adjust the temperature controlto the desired setti...

Side Window Defogging in Cold Weather Vehicles with manual climate control Vehicles with automatic climate control 1 Select the instrument panel andfootwell air vents positionsthrough the air distributioncontrol. Press the defrost button. 2 Press the A/C button. Adjust the temperature controlto the ...

Heated Exterior Mirrors (If Equipped) Note: Do not remove ice from the mirrors with a scraper or attempt to readjust the mirror glass that has frozen in place. These actions couldcause damage to the glass and mirrors. Note: Do not clean the housing or glass of any mirror with harsh abrasives, fuel o...

REMOTE START (IF EQUIPPED) The remote start feature allows you to pre-condition the interior of yourvehicle. The climate control system works to achieve comfort accordingto your previous settings. Note: You cannot adjust the system during remote start operation. Turn the ignition on to return the sy...

SITTING IN THE CORRECT POSITION WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system, resulting inserious injury or death in a crash. Always sit upright against your seatba...

• Keep sufficient distance between yourself and the steering wheel. Werecommend a minimum of 10 inches (25 centimeters) between yourbreastbone and the airbag cover. • Hold the steering wheel with your arms slightly bent. • Bend your legs slightly so that you can press the pedals fully. • Position th...

Note: Before adjusting any head restraint, adjust the seat back to an upright driving or riding position. Properly adjust the head restraint sothat the top of the head restraint is even with the top of your head andpositioned as close as possible to the back of your head. For occupantsof extremely t...

MEMORY FUNCTION (if equipped) The memory control is located on the side seat panel. This feature will automatically recall the position of the following: • Driver seat. • Power mirrors. • Optional adjustable pedals. • Optional power tilt and telescopic steering column. A. Type 1 B. Type 2 Programmin...

Recalling a memory position with the remote control The memory positions are also recalled when you press unlock on yourremote control (if the transmitter is programmed to a memory position)or, when you enter a valid personal entry code that is programmed to amemory position. To program the memory f...

CLIMATE CONTROLLED SEATS (IF EQUIPPED) Heated Seats WARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions,must exercise care when using the seat heater. The se...

Cooled Seats The cooled seats will only function when the engine is running. To operate the cooled seats: Press the cooled seat symbol to cycle through the variouscooling settings and off. Cooler settings are indicated bymore indicator lights. If the engine falls below 350 RPM while the cooled seats...

HOMELINK® WIRELESS CONTROL SYSTEM (IF EQUIPPED) WARNING: Make sure that the garage door and security device are free from obstruction when you are programming. Do not program the system with the vehicle in the garage. WARNING: Do not use the system with any garage door opener that does not have the ...

Programming Note: Put a new battery in the hand-held transmitter. This will ensure quicker training and accurate transmission of the radio-frequency signal. 1. With your vehicle parked outside of the garage and your key in theignition, turn the key so that the ignition is in the on position. 2. Hold...

After programming the HomeLink button, follow Steps 5 – 7 as listedbelow to program your garage door opener. Note: You may need a ladder to reach the unit and you may need to remove the cover orlamp lens on your garage door opener. 5. Press the learn button on the garage dooropener motor, and then y...

Programming HomeLink to a Genie Intellicode 2 garage door opener Note: The Genie Intellicode 2 transmitter must already be programmed to operate with the garage door opener. Programing the transmitters To program HomeLink to the transmitter you must first put thetransmitter into programming mode. To...

Programming HomeLink to the Genie Intellicode garage dooropener motor Note: You may need a ladder to access the garage door opener motor. To program HomeLink to the garagedoor opener motor: 1. Press and hold the PROGRAMbutton on the garage door openermotor until both blue LED’s turn on. 2. Release t...

AUXILIARY POWER POINTS WARNING: Do not plug optional electrical accessories into the cigarette lighter socket (if equipped). Improper use of the lighter can cause damage not covered by your warranty, and can result in fireor serious injury. Note: If used when the engine is not running, the battery w...

CENTER CONSOLE Stow items in the cupholder carefully as items may become loose duringhard braking, acceleration or collisions, including hot drinks which mayspill. Note: The appearance and features of the center console may be different than shown based on your vehicle’s option level. Available cons...

OVERHEAD CONSOLE The appearance of the overhead console will vary according to youroption package. Press near the rear edge of the doorto open it. Storage Compartments 163 2015 TaurusOwners Guide gf, 1st Printing, April 2014USA (fus)

GENERAL INFORMATION WARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. WARNING: Do not park, idle, or drive your vehicle on dry grass or other dry ground cover. The emission system heats up th...

Ignition Modes Off: Turns the ignition off. • Without applying the brake pedal, press and release the button oncewhen the ignition is in the on mode, or when the engine is runningbut the vehicle is not in motion. Accessory: Allows some electrical accessories to operate while the engine is not runnin...

Fast Restart (Vehicles with Keyless Start) The fast restart feature allows you to restart the engine within20 seconds of switching it off, even if a valid key is not present. Within 20 seconds of switching the engine off, press the brake pedal andpress the button. After 20 seconds have expired, you ...

• During the countdown before engine shutdown, you are prompted topress OK or RESET (depending on your type of information display) to temporarily switch the feature off (for the current ignition cycleonly). Stopping the Engine When Your Vehicle is Stationary 1. Move the transmission selector lever ...

Guarding Against Exhaust Fumes WARNING: If you smell exhaust fumes inside your vehicle, have this checked immediately. Do not drive your vehicle if you smell exhaust fumes. Carbon monoxide is present in exhaust fumes. Takeprecautions to avoid its dangerous effects. Important Ventilating Information ...

• Make sure that when in operation, the extension cord plug and theheater cord plug connections are free and clear of water. This couldcause an electric shock or fire. • Make sure your vehicle is parked in a clean area, clear ofcombustibles. • Make sure the heater, heater cord and extension cord are...

SAFETY PRECAUTIONS WARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops. Otherwise, fue...

• Avoid getting fuel liquid in your eyes. If fuel is splashed in the eyes,remove contact lenses (if worn), flush with water for 15 minutes andseek medical attention. Failure to seek proper medical attention couldlead to permanent injury. • Fuels can also be harmful if absorbed through the skin. If f...

Choosing the Right Fuel With a Flex Fuel Vehicle (If Equipped) Use only UNLEADED gasoline or UNLEADED gasoline blended with amaximum of 85% ethanol (E-85) in your Flex Fuel Vehicle (FFV). Ifyour vehicle is flex fuel capable, it will have a yellow bezel placed overthe fuel fill inlet. Do not use: • F...

RUNNING OUT OF FUEL Avoid running out of fuel because this situation may have an adverseeffect on powertrain components. If you have run out of fuel: • You may need to cycle the ignition from off to on several times afterrefueling to allow the fuel system to pump the fuel from the tank tothe engine....

2. To open the fuel filler door, pressthe center of the rear edge and thenrelease. 3. Slowly insert the funnel into the capless fuelsystem. 4. Fill the vehicle with fuel from the portable fuelcontainer. 5. When done, clean the funnel or properly disposeof it. Extra funnels can be purchased from your...

• Keep the fuel pump nozzle in contact with the fuel container whilefilling. • DO NOT use a device that would hold the fuel pump handle in the fillposition. Easy Fuel® No Cap Fuel System WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler door, do not ref...

4. After you are done pumping fuel,slowly remove the fuel fillernozzle—allow about five to tenseconds after pumping fuel beforeremoving the fuel filler nozzle. Thisallows residual fuel to drain backinto the fuel tank and not spill ontothe vehicle. Note: A fuel spillage concern may occur if overfilli...

Note: The amount of usable fuel in the empty reserve varies and should not be relied upon to increase driving range. When refueling your vehicleafter the fuel gauge indicates empty, you might not be able to refuel thefull amount of the advertised capacity of the fuel tank due to the emptyreserve sti...

EMISSION CONTROL SYSTEM WARNING: Do not park, idle, or drive your vehicle in dry grass or other dry ground cover. The emission system heats up the engine compartment and exhaust system, which can start a fire. WARNING: Exhaust leaks may result in entry of harmful and potentially lethal fumes into th...

AUTOMATIC TRANSMISSION WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn the ignition to the off position and remove the key whenever you leave your vehicle. Your vehicle has been designed to improve fuel economy by reducingfuel usage while coasting...

S (Sport) Moving the gearshift lever to S (Sport): • Provides additional grade (engine) braking and extends lower gearoperation to enhance performance for uphill climbs, hilly terrain ormountainous areas. This will increase engine RPM during enginebraking. • Provides additional lower gear operation ...

If your vehicle is equipped with paddles on the steering wheel: • Pull the left paddle (–) todownshift the transmission. • Pull the right paddle (+) to upshiftthe transmission. Upshift to the recommended shift speeds according to the followingchart: Upshifts when accelerating (recommended for best f...

Brake-Shift Interlock WARNING: Do not drive your vehicle until you verify that the brake lamps are working. WARNING: When doing this procedure, you will be taking the vehicle out of park which means the vehicle can roll freely. To avoid unwanted vehicle movement, always fully set the parking brakepr...

2. Insert the screwdriver (or similartool) into the hole and press the leverforward while pulling the gearshiftlever out of position P and into theposition N. 3. Remove the tool and reinstall theinsert. 4. Start the vehicle and release theparking brake. Automatic Transmission Adaptive Learning This ...

GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may beworn out. Have them inspected by an authorized dealer. If your vehiclehas continuous vibration or shudder in the steering wheel while br...

PRINCIPLES OF OPERATION The traction control system helps avoid drive wheel spin and loss oftraction. If your vehicle begins to slide, the system applies the brakes to individualwheels and, when needed, reduces engine power at the same time. If thewheels spin when accelerating on slippery or loose s...

PRINCIPLES OF OPERATION WARNING: Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction and wheel or tire size may change the handlingcharacteristics of your vehicle and may adversely affect theperformance of the AdvanceTrac® system. In...

A Vehicle without AdvanceTrac skidding off its intended route. B Vehicle with AdvanceTrac maintaining control on a slipperysurface. USING ADVANCETRAC® The system automatically activates when you start your engine. Theelectronic stability control portion of the system is disabled when thetransmission...

SENSING SYSTEM (IF EQUIPPED) WARNING: To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed)objects when moving in reverse on a flat surface at parking speeds.Traffic control sy...

If a fault is present in the system, a warning message appears in theinformation display and does not allow the driver to switch the faultedsystem on. Note: If your vehicle is equipped with MyKey®, it is possible to prevent turning the sensing system off. Refer to the MyKey® chapter. Using the Rear ...

Using Active Park Assist Press the button; the touch screendisplays a message and acorresponding graphic to indicateit’s searching for a parking space.Use the turn signal to indicatewhich side of the vehicle you wantthe system to search on. Note: If the turn signal is not on, the system automaticall...

Note: The system always offers the last detected parking space (i.e. if the vehicle detects multiple spaces while you are driving, it offers thelast one). Note: If driven above approximately 20 mph (35 km/h), the touch screen shows a message to alert the driver to reduce vehicle speed. Automatic Ste...

When you think your vehicle has enough space in front and behind it, oryou hear a solid tone from the parking aid (accompanied by atouchscreen display message and a chime), bring your vehicle to acomplete stop. When automatic steering is finished, the touch screen displays a messageindicating that t...

Troubleshooting the System The system does not look for a space The traction control system may be off Any door (except the driver’s) may not be completely closed The system does not offer a particular space Something may be contacting the front bumper or side sensors There is not enough room on bot...

REAR VIEW CAMERA SYSTEM WARNING: The rear view camera system is a reverse aid supplement device that still requires the driver to use it in conjunction with the interior and exterior mirrors for maximumcoverage. WARNING: Objects that are close to either corner of the bumper or under the bumper, migh...

Using the Rear View Camera System The rear view camera system displays what is behind your vehicle whenyou place the transmission in R . The system uses fixed guidelines which show the actual path the vehicle is moving in while reversing in astraight line. This can be helpful when backing into a par...

Guidelines and the Centerline Note: Fixed guidelines and active guidelines (if equipped) are only available when the transmission is in R (Reverse). A. Active guidelines (if equipped) B. Centerline C. Fixed guideline: Green zone D. Fixed guideline: Yellow zone E. Fixed guideline: Red zone F. Rear bu...

PRINCIPLES OF OPERATION Cruise control lets you maintain a set speed without keeping your footon the accelerator pedal. USING CRUISE CONTROL WARNING: Do not use cruise control in heavy traffic, on winding roads or when the road surface is slippery. This could result in loss of vehicle control, serio...

WARNING: Do not use in poor visibility, specifically fog, rain, spray or snow. Note: It is your responsibility to stay alert, drive safely and be in control of your vehicle at all times. The system adjusts your speed to maintain a proper distance betweenyou and the vehicle in front of you in the sam...

4. Take your foot off the accelerator pedal. 5. A lead vehicle graphic willilluminate if there is a vehicledetected in front of you. Note: When adaptive cruise control is active, the speedometer may vary slightly from the set speed displayed in the information display. Following a Vehicle WARNING: W...

The vehicle brakes will be automatically applied to slow your vehicle tomaintain a safe distance from the vehicle in front. The maximum brakingwhich is applied by the system is limited and can be overridden by thedriver applying the brakes. If the system predicts that its maximum braking level will ...

Detection Issues The radar sensor has a limited field of vision. It may not detect vehiclesat all or detect a vehicle later than expected in some situations. The leadvehicle graphic will not illuminate if the system does not detect a vehiclein front of you. Detection issues can occur: A. When drivin...

Blocked Sensor WARNING: Do not use ACC when towing a trailer with brake controls. Aftermarket trailer brakes will not function properly when ACC is activated because the brakes are electronically controlled.Failing to do so may result in loss of vehicle control, which could resultin serious injury. ...

Cause Action Swirling water, or snow or ice onthe surface of the road mayinterfere with the radar signals. Do not use system in theseconditions because it may notdetect any vehicle ahead. You are in a desert or remote areawith no other vehicles and noroadside objects. Wait a short time or switch ton...

DRIVER ALERT (IF EQUIPPED) WARNING: The driver alert system is designed to aid you. It is not intended to replace your attention and judgment. You are still responsible to drive with due care and attention. Note: The system will store the on/off setting in the information display menu through igniti...

System Display When active the system will run automatically in the background andonly issue a warning if required. You can view the status at any timeusing the information display. Refer to the Information Displays chapter. The alertness level is shown by six steps in a colored bar. The current ass...

System Display When you switch the system on, an overhead graphic of avehicle with lane markings will be displayed in the leftinstrument cluster display. If the aid mode is selected after you switch the system on,arrows will be displayed with the lane markings. When you switch the system off, the la...

Using the Systems BLIS® turns on when the engine is started and the vehicle is drivenforward above 3 mph (5 km/h); it remains on while the transmission is inD (Drive) or N (Neutral). If shifted out of D (Drive) or N (Neutral), thesystem enters CTA mode. Once shifted back into D (Drive), BLIS® turnsb...

Zone coverage also decreases when parking at shallow angles. Here, theleft sensor is mostly obstructed; zone coverage on that side is severelylimited. System Lights and Messages The BLIS® and CTA systemsilluminate a yellow alert indicator inthe outside mirror on the side ofthe vehicle the approachin...

System Sensors WARNING: Just prior to the system recognizing a blocked condition and alerting the driver, the number of missed objects will increase. To help avoid injuries, NEVER use the BLIS® as areplacement for using the side and rear view mirrors and looking overyour shoulder before changing lan...

Switching the Systems Off and On One or both systems can be switched off temporarily by using theinformation display control; refer to the Information Display chapter. When the BLIS® is switched off, the driver does not receive alerts andthe information display shows BLIND SPOT SYS OFF and/or CTASYS...

If it is, a red warning lightilluminates and an audible warningchime sounds. The brake support system assists the driver in reducing the collisionspeed by charging the brakes. If the risk of collision further increasesafter the warning light illuminates, the brake support prepares the brakesystem fo...

System Limitations WARNING: The collision warning system’s brake support can only help reduce the speed at which a collision occurs if the driver applies the vehicle’s brakes. The brake pedal must be pressedjust like any typical braking situation. Due to the nature of radar technology, there may be ...

Steering Tips If the steering wanders or pulls, check for: • an improperly inflated tire • uneven tire wear • loose or worn suspension components • loose or worn steering components • improper vehicle alignment A high crown in the road or high crosswinds may also make the steeringseem to wander/pull...

CARGO NET (IF EQUIPPED) WARNING: The cargo net is not designed to restrain objects during a collision or heavy braking. The cargo net secures lightweightobjects in the cargo area. Attach thenet to the anchors provided. Do notput more than 50 pounds(22 kilograms) in the net. LOAD LIMIT Vehicle Loadin...

Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Label on the B-Pillar or the edge of the driver’s door(vehicles exported outside the US and Canada may not have a TireLabel). Look for “THE COMBINED WEI...

Example only: Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue loadweight is also part of cargo weight. Load Carrying 241 2015 TaurusOwners Guide gf, 1st Printing, April 2014USA (fus)

GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all payload. GAWR (Gross Axle Weight Rating) – is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Safety Compliance...

• Example only: WARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structuraldamage, serious damage to the vehicle, loss of control and personalinjury. Load Carrying 243 20...

GCW (Gross Combined Weight) – is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer. GCWR (Gross Combined Weight Rating) – is the maximum allowable weight of the vehicle and the loaded trailer – including all cargo andpassengers – that the vehicle can handle without r...

Steps for determining the correct load limit: 1. Locate the statement “The combined weight of occupants and cargoshould never exceed XXX kg or XXX lbs.” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that willbe riding in your vehicle. 3. Subtract the combin...

TOWING A TRAILER WARNING: Do not exceed the GVWR or the GAWR specified on the certification label. WARNING: Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of your vehicle and could result in engine damage, transmission damage, structural damage, lossof vehicle ...

Hitches Do not use a hitch that either clamps onto the bumper or attaches to theaxle. Distribute the trailer load so 10-15% of the total trailer weight is on thetongue. Safety Chains Note: Never attach safety chains to the bumper. Always connect the safety chains to the hook retainers of your vehicl...

Exceeding these limits may allow water to enter vehicle components: • Causing internal damage to the components. • Affecting driveability, emissions, and reliability. Replace the rear axle lubricant anytime the rear axle submerges inwater. Water may have contaminated the rear axle lubricant, which d...

It is acceptable to have your front-wheel drive vehicle towed from thefront if using proper wheel lift equipment to raise the front wheels offthe ground. When towing in this manner, the rear wheels can remain onthe ground. Front-wheel drive vehicles must have the front wheels placed on a towdolly wh...

BREAKING-IN You need to break in new tires for approximately 300 miles(480 kilometers). During this time, your vehicle may exhibit some uniquedriving characteristics. Avoid driving too fast during the first 1000 miles(1600 kilometers). Vary your speed frequently and change up throughthe gears early....

• Carry unnecessary weight (approximately 1 mpg [0.4 km/L] is lost forevery 400 pounds [180 kilograms] of weight carried). • Add particular accessories to your vehicle (e.g.; bug deflectors,rollbars or light bars, running boards, ski racks). • Drive with the wheels out of alignment. DRIVING THROUGH ...

FLOOR MATS WARNING: Always use floor mats that are designed to fit the foot well of your vehicle, leaving the pedal area unobstructed, and which can be firmly secured to retention posts so that they cannotslip out of position and interfere with the pedals or impair safeoperation of your vehicle in o...

ROADSIDE ASSISTANCE Vehicles Sold in the United States: Getting Roadside Assistance To fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary Roadside Assistance program. Thisprogram is separate from the New Vehicle Limited Warranty. The serviceis available: • 2...

Vehicles Sold in the United States: Using Roadside Assistance Complete the roadside assistance identification card and place it in yourwallet for quick reference. This card is found in the owner’s manualportfolio in the glove compartment. U.S. Ford vehicle customers who require Roadside Assistance, ...

FUEL SHUTOFF WARNING: Failure to inspect and if necessary repair fuel leaks after a collision may increase the risk of fire and serious injury. Ford Motor Company recommends that the fuel system be inspected byan authorized dealer after any collision. In the event of a moderate to severe collision, ...

Connecting the Jumper Cables WARNING: Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery. Note: Do not attach the negative (-) cable to fuel lines, engine rocker covers, the intake...

Jump Starting 1. Start the engine of the booster vehicle and run the engine at amoderately increased speed. 2. Start the engine of the disabled vehicle. 3. Once the disabled vehicle has been started, run both engines for anadditional three minutes before disconnecting the jumper cables. Removing the...

GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorizeddealer. While any authorized dealer handling your vehicle line willprovide warranty service, we recommend you return to your sellingauthorized dealer who wants to ensure your continued satisfaction. Plea...

In Canada: Mailing address Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6K 1C8 Telephone 1-800-565-3673 (FORD) Online www.ford.ca Twitter @FordServiceCA (English Canada)@FordServiceQC (Quebec) Additional Assistance If you have questions or concerns...

UTILIZING THE MEDIATION or ARBITRATION PROGRAM(CANADA ONLY) This pertains to vehicles delivered to authorized Canadian dealers. Inthose cases, where you continue to feel that the efforts by Ford ofCanada and the authorized dealer to resolve a factory-related vehicleservice concern have been unsatisf...

Obtaining a French Owner’s Manual A French owner’s manual can be obtained from your authorized dealer orby contacting Helm, Incorporated using the contact information listedpreviously in this section. REPORTING SAFETY DEFECTS (U.S. ONLY) If you believe that your vehicle hasa defect which could cause...

CHANGING A FUSE Fuses WARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. If electrical components in yourvehicle are not working, a fuse mayhave blown. Blown fuses are identif...

Fuse or relay number Fuse amp rating Protected components 90 10A* Powertrain control modulerun/start 91 10A* Adaptive cruise control module 92 10A* Anti-lock brake system module,Adaptive headlamp module 93 5A* Rear window defroster relay 94 30A** Passenger compartment fusepanel run/start 95 — Not us...

Passenger Compartment Fuse Panel The fuse panel is located under the instrument panel to the left of thesteering wheel. You may need to remove a trim panel to access it. The fuses are coded as follows. Fuse or relay number Fuse amp rating Protected components 1 30A Left front and right rear smartwin...

GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthinessand resale value. There is a large network of Ford authorized dealerswho are there to help you with their professional servicing expertise. Webelieve that their specially trained technicians are best qualifie...

OPENING AND CLOSING THE HOOD 1. Inside the vehicle, pull the hoodrelease handle located under thebottom of the instrument panel nearthe steering column. 2. Go to the front of the vehicle andrelease the auxiliary latch that islocated under the front center ofthe hood. 3. Lift the hood. Maintenance 28...

UNDER HOOD OVERVIEW 3.5L V6 engine A. Engine coolant reservoir B. Windshield washer fluid reservoir C. Brake fluid reservoir D. Battery E. Power distribution box F. Air filter assembly G. Automatic transmission fluid dipstick H. Engine oil dipstick I. Engine oil filler cap A I H G F B C D E 282 Main...

Engine shield Some vehicles may be equipped with an aero-shield under the engine.This shield needs to be removed for service, including oil and filterchanges. It is secured with four quick release fasteners. 284 Maintenance 2015 TaurusOwners Guide gf, 1st Printing, April 2014USA (fus)

2.0L EcoBoost® Engine A. Engine coolant reservoir B. Brake fluid reservoir C. Battery D. Power distribution box E. Air filter assembly F. Engine oil filler cap G. Engine oil dipstick H. Windshield washer fluid reservoir A H G F E B C D Maintenance 285 2015 TaurusOwners Guide gf, 1st Printing, April ...

Only use oils certified for gasoline engines by theAmerican Petroleum Institute (API). An oil with thistrademark symbol conforms to the current engine andemission system protection standards and fueleconomy requirements of the International LubricantsSpecification Advisory Council (ILSAC), comprised...

Adding Engine Coolant WARNING: Do not add engine coolant when the engine is hot. Steam and scalding liquids released from a hot cooling system can burn you badly. Also, you can be burned if you spill coolant on hotengine parts. WARNING: Do not put engine coolant in the windshield washer fluid contai...

• Do not use alcohol, methanol, brine or any engine coolants mixed withalcohol or methanol antifreeze (coolant). Alcohol and other liquids cancause engine damage from overheating or freezing. • Do not add extra inhibitors or additives to the coolant. These can beharmful and compromise the corrosion ...

Engine fluid temperature management (EcoBoost engine only) WARNING: To reduce the risk of collision and injury, be prepared that the vehicle speed may reduce and the vehicle may not be able to accelerate with full power until the fluid temperaturesreduce. Your vehicle has been designed to pull a tra...

WARNING: Never remove the coolant reservoir cap while the engine is running or hot. 4. If the coolant level is normal, you may restart your engine andcontinue on. 5. If the coolant is low, add coolant, restart the engine and take yourvehicle to an authorized dealer. See Adding engine coolant in this...

When Fail-Safe Mode is Activated You have limited engine power when in the fail-safe mode, so drive thevehicle with caution. The vehicle will not be able to maintain high-speedoperation and the engine will run rough. Remember that the engine iscapable of completely shutting down automatically to pre...

7. Without disconnecting the sensor (4), pull the air filter assembly up todisconnect the air filter assembly from the seated grommets locatedunderneath the air filter assembly. 8. Rotate the air filter assembly 90degrees counterclockwise andreinstall into the rubber hose. 9. Tighten the clamp (1). ...

4. Seat the air filter assembly back into the grommets by pushing downon the air filter assembly. 5. Tighten the clamp. 6. Install and tighten two bolts that attach air filter assembly to the frontof the vehicle. 7. Install the bolt cover (if equipped). 8. Reinstall the harness retaining clip into t...

CHANGING THE VEHICLE BATTERY WARNING: Batteries normally produce explosive gases which can cause personal injury. Therefore, do not allow flames, sparks or lighted substances to come near the battery. When working near thebattery, always shield your face and protect your eyes. Always provideproper v...

instrument cluster or center stack display to alert the driver that batteryprotection actions are active. See the Information displays in the Instrument Cluster and Entertainment Systems chapters for more information. These messages are only for notification that an action istaking place, and do not...

CHANGING THE WIPER BLADES 1. Pull the wiper blade and arm awayfrom the glass. 2. Squeeze the locking tabs to releasethe blade from the arm and pull theblade away from the arm to remove it. 3. Attach the new blade to the armand snap it into place. Replace wiper blades at least once peryear for optimu...

Changing the Air Filter Element 3.5L V6 engine 2.0L EcoBoost® engine 3.5L V6 SHO engine 1. Release the clamps that secure the air filter housing cover. 2. Carefully separate the two halves of the air filter housing. 3. Remove the air filter element from the air filter housing. 4. Wipe the air filter...

On the wall or screen you willobserve a flat zone of high intensitylight located at the top of the righthand portion of the beam pattern. Ifthe top edge of the high intensitylight zone is not at the horizontalreference line, the headlamp willneed to be adjusted. 4. Locate the vertical adjuster oneac...

These are examples of unacceptable moisture (usually caused by a lampwater leak): • Water puddle inside the lamp. • Large water droplets, drip marks or streaks present on the interior ofthe lens. Take your vehicle to a dealer for service if any of the above conditions ofunacceptable moisture are pre...

Front parking lamp/turnsignal/sidemarker bulbs: 1. Make sure headlamp switch is inthe off position, then open thehood. 2. Reach in behind the headlampassembly to access the bulb socketsand connectors. 3. Rotate the bulb socket counterclockwise and remove from the lampassembly. 4. Carefully pull the ...

Replacing supplemental park lamp bulbs Your vehicle is equipped with an LED supplemental park lamp. It isdesigned to last the life of the vehicle. If replacement is required, it isrecommended that you see your authorized dealer. BULB SPECIFICATION CHART Replacement bulbs are specified in the chart b...

• Spray Motorcraft Engine Shampoo and Degreaser on all parts thatrequire cleaning and pressure rinse clean. In Canada, use MotorcraftEngine Shampoo. • Never wash or rinse the engine while it is hot or running; water in therunning engine may cause internal damage. • Never wash or rinse any ignition c...

CLEANING THE INTERIOR WARNING: Do not use cleaning solvents, bleach or dye on the vehicle’s safety belts, as these actions may weaken the belt webbing. WARNING: On vehicles equipped with seat-mounted airbags, do not use chemical solvents or strong detergents. Such products could contaminate the side...

Do not use the following products as these may damage the leather: • Oil and petroleum or silicone-based leather conditioners. • Household cleaners. • Alcohol solutions. • Solvents or cleaners intended specifically for rubber, vinyl and plastics. CLEANING THE ALLOY WHEELS Note: Do not use chrome cle...

• If storing your vehicle for more than 30 days without recharging thebattery, it may be advisable to disconnect the battery cables to ensurebattery charge is maintained for quick starting. Note: If battery cables are disconnected, it will be necessary to reset memory features. Brakes • Make sure br...

TIRE CARE Information About Uniform Tire Quality Grading Tire Quality Grades apply to newpneumatic passenger car tires. The TireQuality Grades can be found whereapplicable on the tire sidewall betweentread shoulder and maximum sectionwidth. For example: • Treadwear 200 Traction AA Temperature A Thes...

Traction AA A B C WARNING: The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning or peak traction characteristics. The traction grades, from highest to lowest are AA, A, B, and C. Thegrades represent the...

INFORMATION CONTAINED ON THE TIRE SIDEWALL Both U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the sidewall of all tires. Thisinformation identifies and describes the fundamental characteristics ofthe tire and also provides a U.S. DOT Tire Identifi...

F. 95: Indicates the tire’s load index. It is an index that relates to how much weight a tire can carry. You may find this information in yourowner’s manual. If not, contact a local tire dealer. Note: You may not find this information on all tires because it is not required by federal law. G. H: Ind...

Additional Information Contained on the Tire Sidewall for LT TypeTires LT type tires have some additionalinformation beyond those of P typetires. These differences aredescribed below. Note: Tire Quality Grades do not apply to this type of tire. A. LT: Indicates a tire, designated by the Tire and Rim...

Information on T Type Tires T type tires have some additionalinformation beyond those of P typetires. These differences aredescribed below. T145/80D16 is an example of a tiresize. Note: The temporary tire size for your vehicle may be different fromthis example. Tire Quality Gradesdo not apply to thi...

INFLATING YOUR TIRES Safe operation of your vehicle requires that your tires are properlyinflated. Remember that a tire can lose up to half of its air pressurewithout appearing flat. Every day before you drive, check your tires. If one looks lower than theothers, use a tire gauge to check pressure o...

Damage Periodically inspect the tire treads and sidewalls for damage (such asbulges in the tread or sidewalls, cracks in the tread groove andseparation in the tread or sidewall). If damage is observed or suspected,have the tire inspected by a tire professional. Tires can be damagedduring off-road us...

Tire Replacement Requirements WARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus LT-metric or all-season versus all-terrain) as those originallyprovided by Ford. The recommended tire and wheel size may be foundon either t...

Safety Practices WARNING: If your vehicle is stuck in snow, mud, or sand, do not rapidly spin the tires. Spinning the tires can tear the tire and cause an explosion. A tire can explode in as little as three to five seconds. WARNING: Do not spin the wheels at over 35 mph (56 km/h). The tires may fail...

Tire Rotation Note: If your tires show uneven wear ask an authorized dealer to check for and correct any wheel misalignment, tire imbalance or mechanicalproblem involved before tire rotation. Note: Your vehicle may be equipped with a dissimilar spare tire and wheel assembly. A dissimilar spare tire ...

USING SNOW CHAINS WARNING: Snow tires must be the same size, load index, speed rating as those originally provided by Ford. Use of any tire or wheel not recommended by Ford can affect the safety and performanceof your vehicle, which could result in an increased risk of loss of vehiclecontrol, vehicl...

TIRE PRESSURE MONITORING SYSTEM WARNING: The tire pressure monitoring system is NOT a substitute for manually checking tire pressure. The tire pressure should be checked periodically (at least monthly) using a tire gauge.See Inflating Your Tires in this chapter. Failure to properly maintain your tir...

telltale after replacing one or more tires or wheels on your vehicle toensure that the replacement or alternate tires and wheels allow theTPMS to continue to function properly. The tire pressure monitoring system complies with part 15 of the FCCrules and with RSS-210 of Industry Canada. Operation is...

When You Believe Your System Is Not Operating Properly The main function of the tire pressure monitoring system is to warn youwhen your tires need air. It can also warn you in the event the system isno longer capable of functioning as intended. See the following chart forinformation concerning your ...

Low tirepressurewarning light Possible cause Customer action required Flashingwarning light Spare tire in use Repair the damaged road wheel and tire assembly and reinstall it onthe vehicle to restore systemfunction. For a description on howthe system functions, see When Your Temporary Spare Tire isI...

CHANGING A ROAD WHEEL WARNING: The use of tire sealant may damage your tire pressure monitoring system and should only be used in roadside emergencies. If you must use a sealant, the Ford Tire Mobility Kit sealant should beused. The tire pressure monitoring system sensor and valve stem on thewheel m...

• Ground clearance and parking at curbs • Winter weather driving capability • Wet weather driving capability • All-wheel driving capability (if applicable) • Load leveling adjustment (if applicable) When driving with the full-size dissimilar spare tire and wheel assembly,additional caution should be...

WARNING: Always use the jack provided as original equipment with your vehicle. If using a jack other than the one provided as original equipment with your vehicle, make sure the jack capacity isadequate for the vehicle weight, including any vehicle cargo ormodifications. Note: Passengers should not ...

TEMPORARY MOBILITY KIT (IF EQUIPPED) Note: The temporary mobility kit sealant compound in the canister is to be used for one tire only. See your Ford authorized dealer for additionalreplacement sealant canisters. Your vehicle may be equipped with a temporary mobility kit (located inthe spare tire we...

Loss of air pressure may adversely affect tire performance. For this reason: • Note: Do not drive the vehicle above 50 mph (80 km/h). • Note: Do not drive further than 120 miles (200 kilometers). Drive only to your closest authorized dealer or tire repair shop to have yourtire inspected. • Drive car...

• Do not store the temporary mobility kit unsecured inside thepassenger compartment of the vehicle as it may cause injury during asudden stop or crash. Always store the kit in its original location. • After sealant use, an authorized Ford dealer must replace the tirepressure monitoring system sensor...

8. Inflate the tire to the pressurelisted on the Tire Label located onthe driver’s door or the door jambarea. Note: When the sealing compound is first added into the tire, the air pressure gauge reading on the compressor unit may indicate a highervalue; this is normal and should be no reason for con...

WARNING: If you are proceeding from the First stage: Reinflating the tire with sealing compound and air section and have injected sealant in the tire and the pressure is below 20 psi(1.4 bar), stop and call roadside assistance. If tire pressure is above20 psi (1.4 bar), continue to the next step. 3....

Type 1 Removal of the sealant canister from the temporary mobility kit 1. Unwrap the clear tube from thecompressor housing. 2. Press the button located on thetemporary mobility kit compressorhousing below the canister whilepulling up on the sealant canister. Installation of the sealant canister to t...

6. Remove the bottle. Installation of the sealant canister to the temporary mobility kit 1. Install the new bottle. Re-assemble by following the steps in reverseorder. 2. Tighten the hex connector. Note: If you experience any difficulties with the removal or installation of the sealant canister, con...

TECHNICAL SPECIFICATIONS Wheel Lug Nut Torque Specifications WARNING: When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum orbrake disc that contacts the wheel. Make sure that any f...

ENGINE SPECIFICATIONS Engine 3.5L V6 engine 3.5L V6 SHO engine 2.0L EcoBoost engine Cubic inches 214 214 122 Required fuel See Octane recommendations in the Fuel and Refueling chapter. Firing order 1–4–2–5–3–6 1–4–2–5–3–6 1-3-4-2 Ignitionsystem Coil on plug Coil on plug Coil on plug Spark pluggap 0....

VEHICLE IDENTIFICATION NUMBER The vehicle identification number islocated on the driver’s sideinstrument panel. Please note that in the graphic,XXXX is representative of yourvehicle identification number. The Vehicle Identification Number (VIN) contains the followinginformation: A. World manufacture...

ACCESSORIES For a complete listing of the accessories that are available for yourvehicle, please contact an authorized dealer or visit our online store atwww.Accessories.Ford.com (United States only). Ford Motor Company will repair or replace any properly authorizeddealer-installed Ford Genuine Acce...

Peace of mind • Remote start • Wheel locks • Locking fuel plug for capless fuel system • Bumper mounted parking sensors* • Vehicle security system *The accessory manufacturer designs, develops and therefore warrantsFord Licensed Accessories, and does not design or test these accessoriesto Ford Motor...

Extended Service Plan PROTECT YOURSELF FROM THE RISING COST OF VEHICLE REPAIRSWITH A FORD EXTENDED SERVICE PLAN. SERVICE PLANS (U.S. Only) More than 32 million Ford owners have discovered the powerfulprotection of Ford Extended Service Plan. It is the only extended serviceplan backed by Ford Motor C...

Interest Free Finance Options Available Take advantage of our interest free installment payment plan. Just a 10%down payment will provide you with an affordable, no interest, no feepayment program allowing you all the security and benefits Ford ESPhas to offer while paying over time. You are pre-app...

GENERAL INFORMATION Radio Frequencies and Reception Factors AM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Canadian Radio and TelecommunicationsCommission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.9–107.7, 107.9 MHz Radio reception...

MP3 Track and Folder Structure Audio systems capable of recognizing and playing MP3 individual tracksand folder structures work as follows: • There are two different modes for MP3 disc playback: MP3 trackmode (system default) and MP3 folder mode. • MP3 track mode ignores any folder structure on the ...

MyFord® SYSTEM WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We recommend agai...

C. Memory presets: • In radio mode, store your favorite radio stations. To store a radiostation, tune to the station, then press and hold a preset button untilsound returns. • In CD mode, press one of these buttons to select a track. D. Function buttons: Select different functions of the audio syste...

M. PHONE: Press this button to access the phone features of the SYNC system. See the SYNC chapter for more information. N. AUX: Press this button to access your auxiliary input jack or switch between devices you plug into the input jack or USB port. See Auxiliary input jack later in this chapter. O....

SIRIUS Channel Guide Select to view available satellite radiochannels. Press OK to open a list of the following options for this channel: TuneChannel, Skip Channel or Lock Channel. Onceyou skip or lock a channel, you can only accessit by pressing Direct and entering the channelnumber. Locking or unl...

Potential station issues Issue Cause Action Cannot access HD2 orHD3 multicast channelwhen recalling apreset or from a directtune. The previously storedmulticast preset ordirect tune is notavailable in yourcurrent reception area. No action required.The station is notavailable in yourcurrent location....

SYNC is an in-vehicle communications system that works with yourBluetooth-enabled cellular phone and portable media player. This allowsyou to: • Make and receive calls. • Access and play music from your portable music player. • Use 911 Assist, Vehicle Health Report and SYNC Services (Traffic,Directi...

• Do not leave playing devices in your vehicle during extreme conditionsas it could cause them damage. See your device’s manual for furtherinformation. • Do not attempt to service or repair the system. See your authorizeddealer. For your safety, some SYNC functions are speed-dependent. Their use isl...

Phone Options during an Active Call During an active call, you have additional menu features which becomeavailable such as putting a call on hold, joining calls, etc. Use the arrowbuttons to scroll through the menu options. To access:1. Press MENU during an active call.2. When Active Call Menu is se...

When you select: You can: Call History Access your call history log.1. Press OK to select, then scroll through yourcall history options (incoming, outgoing ormissed).2. Press OK when the desired selection appearsin the display.3. Press the phone button to call the selection. Return Exit the current ...

Text Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages.The system can also read incoming text messages to you so that you donot have to take your eyes off the road. Receiving a Text Message Note: This is a phone-dependent feature. ...

Download Unread Msgs allows you to download your unread messages (only) to SYNC. To download the messages, press OK to select. Thedisplay indicates your messages are being downloaded. When complete,SYNC takes you to your inbox. Delete All Messages? allows you to delete current text messages from SYN...

Pre-defined text message options I need more directions I love you Too funny Can’t wait to see you I’m stuck in traffic Accessing Your Phone Settings These are phone-dependent features. Your phone settings allow you toaccess and adjust features such as your ring tone, text messagenotification, modif...

When you select: You can: Modify Phonebook Modify the contents of your phone book(such as add, delete, download). Press OK toselect and scroll between: Add Contacts: Press OK to add more contactsfrom your phone book. Push the desiredcontact(s) on your phone. See your phone’suser guide on how to push...

System Settings System Settings provide access to your Bluetooth Devices andAdvanced menu features. Use the arrow buttons to scroll through themenu options. The Bluetooth Devices menu allows you to add, connect, delete and set aphone as primary as well as turn your Bluetooth feature on and off. The ...

If you select: You can: Set Bluetooth On/Off Turn the Bluetooth feature on and off.Press OK and scroll to toggle between On andOff. When the desired selection is chosen,press OK. Note: Turning Bluetooth off disconnects all Bluetooth devices and deactivates allBluetooth features. Delete Device Delete...

SYNC APPLICATIONS AND SERVICES (IF EQUIPPED) Note: In order for the following features to work, your cellular phone must be compatible with SYNC. To check your phone’s compatibility, visitwww.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca. • SYNC Services (if equipped, United States only): ...

Vehicle Health Report WARNING: Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. Vehicle Health Report supplements, but cannotreplace normal maintenance and vehicle inspection. Vehicle HealthReport only monitors c...

To run a report using the phone button:1. Press the phone button to enter Phone Menu.2. Scroll until Vehicle Health is selected and press OK.3. Scroll to select from the following options: Vehicle Health Report options User Preferences:Press OK to selectand enter the menu.Scroll to select from: Auto...

3. While on an active route, you can select or say “Route summary” or “Route status” to view the Route Summary turn list or the RouteStatus ETA. You can also turn voice guidance on or off, cancel theroute or update the route. If you miss a turn, SYNC automatically asks if you want the routeupdated. ...

“USB” “Search song <name>” 1,3 “Search track <name>” 1,3 “Shuffle off” “Shuffle on” “Similar music” “What’s playing?” 1 “<name>” is a dynamic listing, meaning that it could be the name of any desired group, artist, etc. 2 Voice commands which are only available in folder mode. 3 Vo...

Voice command guide “Refine” This allows you to make your previouscommand more specific. For example, if youasked to search and play all music by acertain artist, you could then say “refinealbum” and choose a specific album from thelist to view. If you then select Play, the systemonly plays music fr...

When you select: You can: Select Source SYNC USB: Press OK to access music plugged into your USB port. You can also plugin devices to charge them (if supported byyour device). Once connected, the systemindexes any readable media files. (The timerequired to complete this depends on the sizeof the med...

When you select: You can: Media Settings Choose to shuffle or repeat your music andselect your Autoplay settings. Once theseselections are turned on, they remain on untilturned off. Press SEEK to play the previousor next track. Note: Some digital media players require both USB and line in ports to s...

When you select: You can: Playlists Access your playlists (from formats such as ASX,.M3U, .WPL, .MTP.). The system lists yourplaylists alphabetically in flat file mode. If thereare more than 255, they are organized intoalphabetical categories.Press OK to select. Then scroll to select thedesired play...

When you select: You can: Factory Defaults Return to the factory default settings. Thisselection does not erase your indexedinformation (phonebook, call history, textmessages and paired devices).1. Press OK to select and then press OK againwhen Restore Defaults? appears in the display.2. Press OK to...

Vehicle Health Report and SYNC Services (Traffic, Directions and Information) issues Issue Possible cause(s) Possible solution(s) I received a textthat the VehicleHealth Report isnot activated. • Your account may not beactivated on thewebsite, OR • You may have the wrong VIN(vehicleidentificationnum...

SETTINGS Press to select any of the following: • Clock • Display • Sound • Vehicle • Settings • Help HOME Press to access your home screen. Depending on your vehicle’soption package and software, your screens may vary in appearance from the descriptions in this section. Your features may alsobe limi...

Using the Touch-sensitive Controls on Your System To turn a feature on and off, just touch the graphic with your finger. Toget the best performance from the touch-sensitive controls: • Do not press hard on the controls. They are sensitive to light touch. • Use your bare finger to touch the center of...

Cleaning the Touchscreen Display Use a clean, soft cloth such as one used for cleaning glasses. If dirt orfingerprints are still visible, apply a small amount of alcohol to the cloth.Do not pour or spray alcohol onto the display. Do not use detergent orany type of solvent to clean the display. Suppo...

ACCESSING AND ADJUSTING MODES THROUGH YOUR RIGHTVEHICLE INFORMATION DISPLAY (IF EQUIPPED) The display is located on the right side of your instrument cluster. Youcan use your steering wheel controls to view and make minoradjustments to active modes without taking your hands off the wheel.For example...

These commands can be said at any time. “Next page” “Previous page” “What can I say?” “Help” What Can I Say? To access the available voice commands for the current session, do oneof the following: • During a voice session, press the Help icon ( ? ) in the lower left status bar of the screen. • Say, ...

Browsing Device Content When listening to audio on a device, you can browse through otherdevices without having to change sources. For example, if you arecurrently listening to audio on an SD card, you can browse all the artiststhat are stored on your USB device. Press the voice icon on the steering...

Your voice system allows you to change audio sources with a simplevoice command. For example, if you are listening to music on a USBdevice, then want to switch to a satellite radio channel, simply press thevoice button on the steering wheel controls and say the name of theSirius station (such as, “t...

HD Radio Reception and Station Troubleshooting Potential Reception Issues Reception area If you are listening to a multicast station andyou are on the fringe of the reception area,the station may mute due to weak signalstrength. If you are listening to HD1, the systemswitches back to the analog broa...

Radio Voice Commands If you are listening to the radio, press the voice button on thesteering wheel control. When prompted, say any of thecommands in the following chart. If you are not listening to the radio, press the voice button and, after thetone, say “Radio”, then any of the commands in the fo...

“TUNE” “FM <87.9–107.9>” “Help” “FM <87.9-107.9> HD <#>” * * If available. Sirius Satellite Radio (If Activated) Press the lower left corner of the touchscreen, then select the SIRIUS tab. Presets Save a channel by pressing and holding one of the memory preset areas.There is a brie...

Satellite Radio Voice Commands If you are listening to Sirius satellite radio, press the voicebutton on the steering wheel control. When prompted, say anyof the commands in the following chart. If you are not listening to Sirius satellite radio, press the voice buttonand, after the tone, say “Sirius...

“TUNE” “SAT 3” “SAT 3 preset <#>” “Help” Sirius Satellite Radio Information Note: Sirius reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particularchannels, and its prices, at any time, with or without notice to you. FordMot...

Potential satellite radio reception issues Station overload When you pass a ground-basedbroadcast-repeating tower, a stronger signalmay overtake a weaker one and the audiosystem may mute. Satellite radio signalinterference Your display may show ACQUIRING . . . toindicate the interference and the aud...

Sirius troubleshooting tips Radio display Condition Possible action Updating. Update of channelprogramming inprogress. No action required.The process may takeup to three minutes. Call SIRIUS1–888–539–7474. Your satellite service isno longer available. Contact Sirius at1-888-539-7474 toresolve subscr...

Options Sound Settings allows you to adjust settings for: • Bass • Midrange • Treble • Balance and Fade • DSP (Digital Signal Processing) • Occupancy Mode • Speed Compensated Volume. Note: Your vehicle may not have all these sound settings. Compression allows you to turn the compression feature on a...

SD Card Slot and USB Port SD Card Slot Note: Your SD card slot is spring-loaded. To remove the SD card, press the card in and the system ejects it. Do not attempt to pull the card toremove it as this could cause damage. Note: The navigation system also uses this card slot. See Navigation system late...

Playing Music from Your Device Note: The system is capable of indexing up to 30,000 songs. Insert your device and select the SD Card or USB tab once the system recognizes it. You can then select from the following options: Repeat replays the currently playing song or album. Shuffle plays music on th...

SD Card and USB Voice Commands If you are listening to a USB device or an SD card, press thevoice button on the steering wheel control. When prompted, sayany of the commands in the following chart. If you are not listening to a USB device or an SD card, press the voicebutton and, after the tone, say...

Bluetooth Audio Your system allows you to stream audio over your vehicle’s speakers fromyour connected, Bluetooth-enabled cellular phone. To access, press the lower left corner on the touchscreen, thenselect the BT Stereo tab. Bluetooth Audio Voice Commands If you are listening to a Bluetooth audio ...

Troubleshooting • Do not connect the audio input jack to a line level output. The jackonly works correctly with devices that have a headphone output witha volume control. • Do not set the portable music player’s volume level higher than isnecessary to match the volume of the CD or FM radio as this c...

Receiving Calls During an incoming call, an audible tone sounds. Call informationappears in the display if it is available. Accept the call by pressing Accept on the touchscreen or by pressing this phone button on your steering wheel controls. Reject the call by pressing Reject on the touchscreen or...

Messaging Send text messages using your touchscreen. See Text messaging later in this section. Settings Touch this button to access various phone settings, such as turningBluetooth on and off, managing your phonebook and more. See Phone settings later in this section. Text Messaging Note: Downloadin...

You can then preview the message, verify the recipient as well as updatethe message list. Pre-defined text message options I’ll call you back in a few minutes. I just left, I’ll be there soon. Can you give me a call? I’m on my way. I’m running a few minutes late. I’m ahead of schedule, so I’ll be th...

INFORMATION If your vehicle is equipped with Navigation, touch the i(Information) button to access these features. If your vehicle isnot equipped with Navigation, touch the corner of the touchscreen with the green tab. Under the Information menu, you can access features, such as: A. SYNC Services B....

Connecting to SYNC Services Using the Touchscreen If your vehicle is equipped with Navigation, touch the i(Information) button to access these features. If your vehicle isnot equipped with Navigation, touch the corner of the touchscreen with the green tab. Press Services. 1. Select Connect to Servic...

SYNC Services Voice Commands When a route has been downloaded (non-navigation systems),press the voice button on the steering wheel control. Whenprompted, say any of the following commands: “SERVICES” “Cancel route” “Navigation voice off” “Navigation voice on” “Next turn” “Route status” “Route summa...

Note: Neither Sirius nor Ford is responsible for any errors or inaccuracies in the Sirius Travel Link services or its use in vehicles. When you subscribe to Sirius Travel Link, it can help you locate the bestgas prices, find movie listings, get current traffic alerts, view the currentweather map, ge...

Sirius Travel Link Voice Commands Note: In order to use Sirius Travel Link, your vehicle must be equipped with navigation and your navigation SD card must be in the SD card slot. Press the voice button on the steering wheel controls and, whenprompted, say any of the following: Travel Link voice comm...

Setting 911 Assist On If your vehicle is equipped with Navigation, touch the i(Information) button to access these features. If your vehicle isnot equipped with Navigation, touch the corner of the touchscreen with the green tab. Press Apps > 911 Assist, > On. You can also access 911 Assist by:...

Note: Cellular phone and SMS charges may apply when making a report. Register for Vehicle Health Report and set your report preferences atwww.SYNCMyRide.com. After registering, you can request a VehicleHealth Report (inside your vehicle). Return to your account atwww.SYNCMyRide.com to view your repo...

SETTINGS A. Clock B. Display C. Sound D. Vehicle E. Settings F. Help Under this menu, you can set your clock, access and adjust thedisplay, sound and vehicle settings as well as access settings forspecific modes or the help feature. Clock Note: You cannot manually set the date. Your vehicle’s GPS do...

You can also turn the outside air temperature display on and off. Itappears at the top center of the touchscreen, next to the time and date. The system automatically saves any updates you make to the settings. Display You can adjust the touchscreen display through the touchscreen or bypressing the v...

Only the photograph(s), which meets the following conditions, display: • Compatible file formats are as follows: .jpg, .gif, .png, .bmp. • Each file must be 1.5 MB or less. • Recommended dimensions: 800 x 384. Sound Press the Settings icon > Sound, then select from the following: Sound Settings B...

Door Keypad Code To change the keypad code for your keyless entry keypad system:1. Press the Settings icon > Vehicle > Door Keypad Code. 2. Enter your current factory code, then, when prompted, enter your new code. Camera Settings This menu allows you to access settings for your rear view came...

Media Player Press the Settings icon > Settings > Media Player, then select from the following: Media player Autoplay When this feature is on, the systemautomatically switches to the media sourceupon initial connection. This allows you tolisten to music during the indexing process.When this fe...

Navigation Press the Settings icon > Settings > Navigation, then select from the following: Navigation Map Preferences Turn breadcrumbs on and off. Have the system display your turn list top tobottom or bottom to top. Turn the Parking POI notification on and off. Route Preferences Preferred Ro...

Phone Phone Ringer Select the type of notification for phone calls- ring tone, beep, text to speech, or have it besilent. Text MessageNotification Select the type of notification for textmessages - alert tone, beep, text to speech, orhave it be silent. Internet DataConnection If compatible with your...

Wireless & Internet USB MobileBroadband Instead of using Wi-Fi, your system can alsouse a USB mobile broadband connection toaccess the internet. (You must turn on yourmobile broadband device on your personalcomputer before connecting it to the system.)This screen allows you to set up what is you...

CLIMATE Touch the lower right corner on the touchscreen to access your climatecontrol features. Depending on your vehicle line and option package,your climate screen may look different from this screen. Note: You can switch temperature units between Fahrenheit and Celsius. See Settings in this chapt...

Additional climate control voice commands “Dual off” “Temperature” * “Fan decrease” “Temperature <15.5–29.5> degrees” “Fan increase” “Temperature <60–85> degrees” “Floor on” “Temperature decrease” “Max A/C off” “Temperature high” “Max A/C on” “Temperature increase” “My temp” “Temperature...

Setting a Destination Press the green corner of your touchscreen, then Dest when it appears. Choose any of the following: Destination selections My Home Street Address Favorites Intersection Previous Destinations City Center Point of Interest Map Emergency Edit Route Cancel Route 1. Enter the necess...

cityseekr (If Available) Note: cityseekr point of interest information is limited to approximately 912 cities (881 in the United States, 20 in Canada and 11 in Mexico). cityseekr, when available, is a service thatprovides more information about certainpoints of interest such as restaurants,hotels an...

This icon appears when your selection exists in multiplecategories within the system. When you are viewing more information for hotels, cityseekr also tellsyou if the hotel has certain services and facilities using icons. Hotel services and facilities Restaurant 24 Hr Room Service Business Center Fi...

Avoid Areas Avoid Areas allows you to choose areas which you want the system to avoid when calculating a route for you. Press Add to program an entry. Once you make a selection, the system tries to avoid the area(s) if possible for all routes. To delete a selection,choose the listing on the screen. ...

3D map mode provides an elevated perspective of the map. This viewing angle can be adjusted and the map can be rotated 180degrees by touching the map twice, and then dragging your fingeralong the shaded bar with arrows at the bottom of the map. View switches between full map, street list and exit vi...

Map Icons Vehicle mark shows the current location of your vehicle. It stays in the center of the map display, except when in scrollmode. Scroll cursor allows you to scroll the map; the fixed icon is in the center of the screen. The map position closest to the cursoris in a window on the top center p...

Quick-touch Buttons When in map mode, touch anywhere on the map display to access morefeatures. Set as Dest Touch this button to select a scrolled location on the map as yourdestination. You may scroll the map by pressing your index finger on themap display. When you reach the desired location, simp...

“DESTINATION” “Intersection” “Nearest <POI category>” “Nearest POI” “Play nametags” “POI category” “Previous destination” “Street address” “Help” “NAVIGATION” “Destination” * “Zoom city” “Zoom country” “Zoom in minimum” “Zoom out maximum” “Zoom province” “Zoom state” “Zoom street” “Zoom to <...

GENERAL INFORMATION SYNC® End User License Agreement (EULA) • You have acquired a device (“DEVICE”) that includes software licensed by Ford Motor Company and its affiliates (“FORD MOTORCOMPANY”) from an affiliate of Microsoft Corporation (“MS”). Thoseinstalled software products of MS origin, as well...

SOFTWARE’s ability to use WMDRM to play or copy protectedcontent. This action does not affect unprotected content. When yourDEVICE downloads licenses for protected content, you agree thatMicrosoft may include a revocation list with the licenses. Contentowners may require you to upgrade the SOFTWARE ...

property rights in and to the content which may be accessed through useof the SOFTWARE is the property of the respective content owner andmay be protected by applicable copyright or other intellectual propertylaws and treaties. This EULA grants you no rights to use such content.All rights not specif...

Adobe Contains Adobe® [Flash® Player] or [AIR®] technology by AdobeSystems Incorporated. This [Licensee Product] contains [Adobe® Flash®Player] [Adobe® AIR®] software under license from Adobe SystemsIncorporated, Copyright 娀 1995-2009 Adobe Macromedia Software LLC. All rights reserved. Adobe, Flash ...

General operation Voice Command Control Functions within the Windows Automotive-based system may beaccomplished using only voice commands. Using voice commands whiledriving allows you to operate the system without removing your handsfrom the wheel. Prolonged Views of Screen Do not access any functio...

code, audio library or structure of the Telenav Software without the priorexpress written consent of Telenav; (c) remove from the TelenavSoftware, or alter, any of Telenav’s or its suppliers’ trademarks, tradenames, logos, patent or copyright notices, or other notices or markings;(d) distribute, sub...

TERMS AND CONDITIONS License Limitations on Use: You agree that your license to use this Data is limited to and conditioned on use for solely personal,noncommercial purposes, and not for service bureau, timesharing orother similar purposes. Except as otherwise set forth herein, you agreenot to other...

Disclaimer of Warranty: HERE AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) DISCLAIM ANY WARRANTIES,EXPRESS OR IMPLIED, OF QUALITY, PERFORMANCE,MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE ORNON-INFRINGEMENT. Some States, Territories and Countries do notallow certain warranty exclu...

Gracenote® Copyright CD and music — related data from Gracenote, Inc., copyright 娀 2000–2007 Gracenote. Gracenote Software, copyright 娀 2000–2007 Gracenote. This product and service may practice one or more of thefollowing U.S. Patents #5,987,525; #6,061,680; #6,154,773, #6,161,132,#6,230,192, #6,23...

Vehicle with SYNC only FCC ID: KMHSG1G1 IC: 1422A-SG1G1 Vehicle with SYNC and MyFord Touch or MyLincoln Touch FCC ID: KMHSYNCG2 IC: 1422A-SYNCG2 This device complies with Part 15 of the FCC Rules and with RSS-210 ofIndustry Canada. Operation is subject to the following two conditions:(1) This device...

GENERAL MAINTENANCE INFORMATION Why Maintain Your Vehicle? Carefully following the maintenance schedule helps protect against majorrepair expenses resulting from neglect or inadequate maintenance andmay help to increase the value of your vehicle when you sell or trade it.Keep all receipts for comple...

Protecting Your Investment Maintenance is an investment that will pay dividends in the form ofimproved reliability, durability and resale value. To maintain the properperformance of your vehicle and its emission control systems, it isimperative that scheduled maintenance be completed at the designat...

Oils, Fluids and Flushing In many cases, fluid discoloration is a normal operating characteristicand, by itself, does not necessarily indicate a concern or that the fluidneeds to be changed. However, discolored fluids that also show signs ofoverheating and foreign material contamination should be in...

Normal scheduled maintenance * At every oil changeinterval as indicated bythe information display Change engine oil and filter. ** Rotate tires, inspect tire wear and measuretread depth. Perform multi-point inspection(recommended). Inspect automatic transmission fluid level (ifequipped with dipstick...

Other maintenance items 1 Every 20000 miles(32000 km) Replace cabin air filter (if equipped). Every 30000 miles(48000 km) Replace climate-controlled (heated andcooled) seat filter 2 . Replace engine air filter. At 100000 miles(160000 km) Change engine coolant. 3 Every 100000 miles(160000 km) Replace...

Maintenance Schedule Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ...

Extensive idling or low-speed driving for long distances as in heavy commercial use (such as delivery, taxi, patrol car or livery) As required Change engine oil and filter as indicated bythe information display and perform serviceslisted in the Normal Scheduled Maintenancechart. Inspect frequently,s...

Special Operating Condition Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D A...

Engine Coolant Change Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M...

911 Assist™ ......................408, 483 A ABS (see Brakes) .....................196 Accessing and using yourUSB port ....................................461 Accessing call history/phonebook during active call .............398 Accessing your calendar ..........482 Accessing your media menufeatures...