Ford 2014 Flex v.2- Manuals

Symbol Description Symbol Description Symbol Description Heated rearwindow Interiorluggagecompartmentrelease Jack Lightingcontrol Low tirepressurewarning Maintaincorrect fluidlevel Panic alarm Parking aidsystem Parkingbrake system Powersteering fluid Powerwindowsfront andrear Powerwindowlockout Serv...

Note: Including to the extent that any law pertaining to EventData Recorders applies to SYNC® or its features, please note thefollowing: Once 911 Assist (if equipped) is enabled (set ON),911 Assist may, through any paired and connected cell phone,disclose to emergency services that the vehicle has b...

FORD CREDIT (U.S. ONLY) Ford Credit offers a full range of financing and lease plans to help youacquire your vehicle. If you have financed or leased your vehicle throughFord Credit, thank you for your business. For your convenience, we offer a number of ways to contact us, as wellas help manage your...

SPECIAL NOTICES New Vehicle Limited Warranty For a detailed description of what is covered and what is not coveredby your vehicle’s New Vehicle Limited Warranty, see the warrantyinformation that is provided to you along with your owner’s manual. Special Instructions For your added safety, your vehic...

GENERAL INFORMATION See the following sections for directions on how to properly use safetyrestraints for children. WARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be bought separately from your v...

Recommendations for Safety Restraints for Children Child size, height, weight, or age Recommendedrestraint type Smallchildren Children who have outgrown or nolonger properly fit in a child safety seat(generally children who are less than4 ft. 9 in. (1.45 m) tall, are greater thanage four (4) and les...

CHILD SEAT POSITIONING WARNING: Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move thevehicle seat upon which the child seat is installed all the way back.When poss...

WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the riskof injury or death in a crash. WARNING: To avoid risk of injury, do not leave children or pets unattende...

BOOSTER SEATS WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the riskof injury or death in a crash. Use a belt-positioning booster seat for children who have o...

Types of Booster Seats • Backless booster seats If your backless booster seat has a removable shield, remove the shield.If a vehicle seating position has a low seat back or no head restraint, abackless booster seat may place your child’s head (as measured at thetops of the ears) above the top of the...

Using Lower Anchors and Tethers for CHildren (LATCH) WARNING: Never attach two child safety seats to the same anchor. In a crash, one anchor may not be strong enough to hold two child safety seat attachments and may break, causing serious injuryor death. WARNING: Depending on where you secure a chil...

Each time you use the safety seat, check that the seat is properlyattached to the lower anchors and tether anchor, if applicable. Tug thechild seat from side to side and forward and back where it is secured tothe vehicle. The seat should move less than one inch when you do thisfor a proper installat...

2. Locate the correct anchor for the selected rear seating position. • Second-row bucket (40/40) • Second-row bench (60/40) • Third-row seat Note: The cargo tie-downs at the rear edge of the floor are not tether anchors. 34 Child Safety 2014 Flex (471) Owners Guide gf, 2nd Printing, November 2013USA...

CHILD SAFETY LOCKS The childproof locks are located on the rear edge of each rear door andmust be set separately for each door. Setting the lock for one door willnot automatically set the lock for both doors. • Insert the key and turn to thelock position (key horizontal) toengage the childproof lock...

PRINCIPLES OF OPERATION WARNING: Always drive and ride with your seat back upright and the lap belt snug and low across the hips. WARNING: To reduce the risk of injury, make sure children sit where they can be properly restrained. WARNING: Never let a passenger hold a child on his or her lap while t...

FASTENING THE SAFETY BELTS The front outboard and rear safety restraints in your vehicle arecombination lap and shoulder belts. 1. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) until you hear a snap and feelit latch. Make sure the tongue i...

Pregnant women should alwayswear their safety belts. The lap beltportion of a combination lap andshoulder belt should be positionedlow across the hips below the bellyand worn as tight as comfort willallow. The shoulder belt should bepositioned to cross the middle ofthe shoulder and the center of the...

Automatic Locking Mode In this mode, the shoulder belt or lap belt is automatically pre-locked.The belt will still retract to remove any slack in the shoulder or lap belt.The automatic locking mode is not available on the driver safety belt. When to Use the Automatic Locking Mode This mode should be...

Conditions of Operation If... Then... The driver’s safety belt is notbuckled before the ignitionswitch is turned to the onposition... The safety belt warning lightilluminates 1-2 minutes and thewarning chime sounds 4-8 seconds. The driver’s safety belt isbuckled while the indicatorlight is illuminat...

Note: The driver and front passenger Belt-Minder are deactivated and activated independently. When deactivating or activating one seatingposition, do not buckle the other position as this will terminate theprocess. Read Steps 1 - 5 thoroughly before proceeding with the programmingprocedure. Note: If...

REAR INFLATABLE SAFETY BELT (IF EQUIPPED) WARNING: Do not attempt to service, repair, or modify the rear inflatable safety belt as you could be seriously injured or killed. Note: The rear inflatable safety belts are compatible with most infant and child safety car seats and belt positioning booster ...

• During a crash of sufficient force, the inflatablebelt will inflate from inside the webbing. • The fully inflated belt’s increased diameter moreeffectively holds the occupant in the appropriateseating position, and spreads crash forces overmore area of the body than regular safety belts.This helps...

CHILD RESTRAINT AND SAFETY BELT MAINTENANCE Inspect the vehicle safety belts and child safety seat systems periodicallyto make sure they work properly and are not damaged. Inspect thevehicle and child seat safety belts to make sure there are no nicks, tearsor cuts. Replace if necessary. All vehicle ...

PERSONAL SAFETY SYSTEM™ The Personal Safety System provides an improved overall level of frontalcrash protection to front seat occupants and is designed to help furtherreduce the risk of airbag-related injuries. The system is able to analyzedifferent occupant conditions and crash severity before act...

WARNING: If the airbag has deployed, the airbag will not function again and must be replaced immediately. If the airbag is not replaced, the unrepaired area will increase the risk of injury in acrash. The airbags are a supplemental restraint system and are designed towork with the safety belts to he...

The horn and lamps will turn off when: • You press the hazard control button. • You press the panic button (if equipped) on the remote entrytransmitter. • Your vehicle runs out of power. DRIVER AND PASSENGER AIRBAGS WARNING: Never place your arm or any objects over an airbag module. Placing your arm...

Proper Driver and Front Passenger Seating Adjustment WARNING: The National Highway Traffic Safety Administration recommends a minimum distance of at least 10 inches (25 centimeters) between an occupant’s chest and the driver airbagmodule. Failure to follow this could seriously increase the risk of i...

FRONT PASSENGER SENSING SYSTEM WARNING: Even with Advanced Restraints Systems, children 12 and under should be properly restrained in a rear seating position. Failure to follow this could seriously increase the risk of injuryor death. WARNING: Sitting improperly out of position or with the seat back...

The front passenger sensing systemuses a passenger airbag statusindicator which will illuminateindicating that the front passengerfrontal airbag is either ON(enabled) or OFF (disabled).The indicator lamp is located in thecenter stack of the instrumentpanel. Note: When the ignition is first turned on...

The conditions listed above may cause the weight of a properly seatedoccupant to be incorrectly interpreted by the front passenger sensingsystem. The person in the front passenger seat may appear heavier orlighter due to the conditions described in the previous list. Make sure the front passenger se...

Note: The passenger sensing system will deactivate the passenger seat-mounted side airbag if it detects an empty passenger seat.The design and development of the side airbag system includedrecommended testing procedures that were developed by a group ofautomotive safety experts known as the Side Air...

CRASH SENSORS AND AIRBAG INDICATOR WARNING: Modifying or adding equipment to the front end of your vehicle (including frame, bumper, front end body structure and tow hooks) may affect the performance of the airbag system,increasing the risk of injury. Do not modify the front end of yourvehicle. Your...

• The design of the front airbags is to activate only in frontal andnear-frontal crashes (not rollovers, side impacts or rear impacts)unless the crash causes sufficient frontal deceleration. • The design of the safety belt pretensioners and rear inflatable safetybelts is to activate in frontal, near...

GENERAL INFORMATION ON RADIO FREQUENCIES This device complies with part 15 of the FCC Rules and with IndustryCanada license-exempt RSS standard(s). Operation is subject to thefollowing two conditions: (1) This device may not cause harmfulinterference, and (2) This device must accept any interference...

REMOTE CONTROL Integrated Keyhead Transmitters (IKTs) (If Equipped) Use the key blade to start yourvehicle and unlock or lock the driverdoor from outside your vehicle. Thetransmitter portion functions as theremote control. Note: Your vehicle’s keys came with a security label that providesimportant k...

Note: Your vehicle’s back-up keys came with a security tag thatprovides important key cutinformation. Keep the tag in a safeplace for future reference. Replacing the Battery Note: Refer to local regulations when disposing of transmitter batteries. Note: Do not wipe off any grease on the battery term...

Programming memory to the transmitter To activate this feature: 1. Move the memory features to the desired positions using theassociated controls. 2. Press and hold button 1 for five seconds. A tone will soundconfirming memory position hasbeen set. Continue to hold until asecond tone is heard after ...

Turning the Vehicle Off After Remote Starting Press the button once. The parking lamps will turn off. You may have to be closer to your vehicle than when starting due toground reflection and the added noise of the running vehicle. You can disable or enable the remote start system through theinformat...

PRINCIPLES OF OPERATION MyKey allows you to program keys with restricted driving modes topromote good driving habits. All but one of the keys programmed to thevehicle can be activated with these restricted modes. Any keys that have not been programmed are referred to asadministrator keys or admin ke...

• Vehicle speed minders of 45, 55 or 65 mph (75, 90 or 105 km/h).Once you select a speed, it will be shown in the display, followed byan audible tone when the preselected vehicle speed is exceeded. • Audio system maximum volume of 45%. A message will be shown inthe display when you attempt to exceed...

LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lockand unlock your vehicle. Power Door Locks The power door lock control is located on the driver and front passengerdoor panels. A. Unlock B. Lock Remote Control You can use the remote control anytime your vehic...

Note: If any door or the luggage compartment is open, or if the hood is open on vehicles with an anti-theft alarm or remote start, the hornsounds twice and the lamps will not flash. Activating Intelligent Access (If Equipped) You must have the intelligent access key within 3 feet (1 meter) of yourve...

Smart Unlocks for Intelligent Access Keys (If Equipped) This feature helps to prevent you from unintentionally locking yourintelligent access key inside your vehicle’s passenger compartment orrear cargo area. When you lock your vehicle using the driver or passenger power doorlock control (with the d...

Autounlock Feature (If Enabled) The autounlock feature will unlock all the doors when: • the ignition is on, all the doors are closed, and your vehicle has beenin motion at a speed greater than 12 mph (20 km/h); • your vehicle has then come to a stop and the ignition is switched offor to accessory; ...

The liftgate area is only intended for cargo, not passengers. To open the liftgate: Press the button located in the top of theliftgate pull cup handle to unlatch theliftgate, then pull on the outsidehandle. Power Liftgate (If Equipped) WARNING: Make sure all persons are clear of the power liftgate a...

Obstacle Detection When closing: The liftgate will reverse to full open when it detects an obstacle. A chime will sound three times as the liftgate begins to reopen.Remove the obstacle to close the liftgate. Note: Entering your vehicle while the liftgate is closing can cause your vehicle to bounce a...

You can use the keypad to: • lock or unlock the doors • recall memory features • enable or disable the autolockand autounlock • arm and disarm the anti-theftalarm You can operate the keypad with the factory-set 5-digit entry code.This code is located on the owner’s wallet card in the glove box and i...

Tips: • Do not set a code that uses five of the same number. • Do not use five numbers in sequential order. • The factory-set code will work even if you have set your own personalcode. Erasing a Personal Code 1. Enter the factory-set 5-digit code. 2. Press and release 1 • 2 on the keypad within five...

• Press the panic button on the remote control. The alarm system willstill be armed, but this shuts off the horn and turn lamps when thealarm is sounding. Note: If the driver door is unlocked with a key, a tone will sound when you open the door and a message will appear in the information display.Yo...

ADJUSTING THE STEERING WHEEL WARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position in the Seats chapter. 1. Unlock the steering column. 2. Adjust the steering wheel to thedesired positi...

AUDIO CONTROL SEEK: Press to select the next or previous stored preset or track.Press and hold to select the next orprevious frequency or seek througha track. MEDIA: Press repeatedly to scroll through available audio modes. MUTE: Press to silence the radio. VOL (Volume): Press to increase or decreas...

CRUISE CONTROL Type 1 Type 2 See the Cruise Control chapter for information on this feature. SET RES CNCL ON OFF GAP 94 Steering Wheel 2014 Flex (471) Owners Guide gf, 2nd Printing, November 2013USA (fus)

INFORMATION DISPLAY CONTROL See the Information Displays chapter for more information. Cluster Display Control Features If equipped with: MyFord system: This control functions the same as the centercontrol on the faceplate. See MyFord system in the Audio Systems chapter. MyFord Touch: Use this contr...

ADJUSTABLE PEDALS (IF EQUIPPED) WARNING: Never adjust the accelerator and brake pedal with feet on the pedals while the vehicle is moving. The control is located on the left side of the steering column. Press andhold the appropriate control to move the pedals. A. Farther B. Closer The pedal position...

WINDSHIELD WIPERS Note: Fully defrost the windshield before switching on the windshield wipers. Note: Make sure you switch off the windshield wipers before entering a car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears. If that does not resolve the issue, i...

LIGHTING CONTROL A. Off B. Parking lamps, instrument panellamps, license plate lamps and taillamps C. Headlamps High Beams • Push the lever toward theinstrument panel to activate. • Push the lever toward theinstrument panel again or pullthe lever towards you todeactivate. Headlamp Flasher • Pull tow...

AUTOLAMPS (If equipped) WARNING: In severe weather conditions, it may be necessary to switch your headlamps on manually. Note: If the vehicle is equipped with autolamps, it will have the windshield wiper rainlamp feature. When the windshield wipers are turned to low- or high-speed wiping during dayl...

FRONT FOG LAMPS The fog lamps can be turned onwhen the lighting control is pulledtoward you and in the headlamps,parking lamps or autolampspositions. The fog lamps will not operatewhen the high beams are active. DIRECTION INDICATORS • Push down to activate the leftturn signal. • Push up to activate ...

POWER WINDOWS WARNING: Do not leave children unattended in your vehicle and do not let children play with the power windows. They may seriously injure themselves. WARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in ...

Pull up the window switch and hold within two seconds of the windowreaching the bounce-back position. The window will travel up with nobounce-back protection. The window will stop if you release the switchbefore the window is fully closed. Window Lock A. Unlock B. Lock Press the control to lock or u...

Power-Folding Mirrors (If Equipped) Note: Using the mirrors 10 or more times within one minute, or repeated folding and unfolding of the mirrors while holding the controldown during full travel, may disable the system to protect motors fromoverheating. Wait approximately three minutes with your vehi...

The image of the approachingvehicle is small and near the inboardedge of the main mirror when it is ata distance. The image becomeslarger and begins to move outboardacross the main mirror as the vehicleapproaches (A). The image willtransition from the main mirror andbegin to appear in the blind spot...

Auto-Dimming Mirror Note: Do not block the sensors on the front and back of the mirror. Mirror performance may be affected. A rear center passenger or raisedrear center head restraint may also block light from reaching the sensor. The mirror will dim automatically to reduce glare when bright lights ...

GAUGES Type 1 Cluster shown in standard measure – metric clusters similar. A. Tachometer B. Information display. See Information displays for more information. C. Speedometer D. Fuel gauge Fuel gauge Indicates approximately how much fuel is left in the fuel tank (when theignition is on). The fuel ga...

Type 2 Cluster shown in standard measure – metric clusters similar. A. Information display. See Information displays for more information. B. Speedometer C. Infotainment display. See MyFord Touch™ for more information. WARNING LAMPS AND INDICATORS There indicators can alert you to a vehicle conditio...

• Engaged (green light): Illuminates when the adaptive cruise controlsystem is engaged. Turns off when the speed control system isdisengaged. Stability Control System Displays when the AdvanceTrac®/Traction control is active.If the light remains on, have the system serviced immediately. Stability Co...

Grade assist and overdrive cancel (if equipped) (RTT) Illuminates when grade assist is turned on. Heads up display (if equipped) A red beam of lights will illuminate on the windshield in certaininstances when using adaptive cruise control and/or thecollision warning system. It will also illuminate m...

Park lamps Illuminates when the park lamps are on. Powertrain malfunction/reduced power (RTT) Illuminates when a powertrain or an AWD fault has beendetected. Contact your authorized dealer as soon as possible. Safety belt Reminds you to fasten your safety belt. A Belt-Minder® chimewill also sound to...

GENERAL INFORMATION WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We recommend...

Fuel Economy Distance to E Inst Fuel Econ Average Fuel †See Trip and fuel economy computer later in this section for more information. Information MyKey® Distance (if key is programmed) — Distance traveled when aprogrammed key is in use. MyKey® Information — Number of MyKeys and admin keysprogrammed...

Settings Display Language Select your applicable language Units Distance Miles and Gallons or km/Lor L/100km Temperature Fahrenheit (°F) or Celsius (°C) Convenience AutolampDelay Off or number of seconds Compass Display Calibrate (ifequipped) Hold OK to Calibrate Zone (1–15) DTECalculation Normal or...

Settings MyKey CreateMyKey Hold OK to Create MyKey 911 Assist Always On or User Selectable AdvanceTrac Always On or User Selectable Max Speed Choose desired speed or Off Speed Minder Choose desired speed or Off Volume Limiter Clear MyKeys Hold OK to Clear MyKeys TRIP AND FUEL ECONOMY COMPUTER Resett...

Information Display Controls (Type 2) • Press the up and down arrowbuttons to scroll through andhighlight the options within amenu. • Press the right arrow button toenter a sub-menu. • Press the left arrow button toexit a menu. • Press the OK button to chooseand confirm a setting/messages. Main menu...

Driver Assist In this mode, you can configure different driver setting choices. Note: Some items are optional and may not appear. Driver Assist Traction Control — check enabled (default) / uncheck disabled Blindspot — check enabled (default) / uncheck disabled Collision Warning Sensitivity High / No...

Settings (cont’d) *MyKey MyKey Status MyKeys / Admin Keys CreateMyKey Hold OK to Create MyKey 911 Assist Always On / User Selectable TractionControl Always On / User Selectable Max Speed Choose desired speed or off Speed Minder Choose desired speed or off VolumeLimiter On / Off Do NotDisturb Always ...

Press the OK button toacknowledge and remove somemessages from the informationdisplay. Other messages will beremoved automatically after a shorttime. When a warning messageappears, you must wait two secondsbefore being able to clear it. Certain messages need to be confirmed before you can access the...

Alarm/Security Messages Action / Description Vehicle Alarm To StopAlarm, Start Vehicle. Displayed when the perimeter alarm system isarmed and the vehicle is entered using the keyon the driver’s side door. In order to preventthe perimeter alarm system from triggering,the ignition must be turned to st...

Battery and Charging System Messages Action / Description Check ChargingSystem Displayed when the charging system needsservicing. If the warning stays on or continuesto come on, contact your authorized dealer assoon as possible. Turn Power Off toSave Battery Displayed when the battery managementsyst...

BLIS® Messages Action / Description Cross Traffic SystemFault Displayed when a fault with the cross trafficalert system has occurred. Contact yourauthorized dealer as soon as possible. Vehicle ComingFrom X Displayed when the blind spot informationsystem with cross traffic alert (CTA) system isoperat...

Keys and Intelligent Access Messages Action / Description Max Number of KeysLearned Displayed during spare key programming whenthe maximum number of keys have beenprogrammed. Press Brake to Start Displayed when the start/stop button ispressed without the brake pedal being applied.This is a reminder ...

Passenger Sensing System Message Action / Description Occupant SensorBLOCKED RemoveObjects NearPassenger Seat Displayed when objects are by the passengerseat. After the objects are moved away fromthe seat, if the warning stays on or continuesto come on contact your authorized dealer assoon as possib...

MANUAL HEATING AND AIR CONDITIONING SYSTEM A. Power: Press to turn the system off and on. When the system is off, outside air cannot enter the vehicle. B. Air distribution control: Press to set the air distribution to a position listed below: Distributes air through the windshield defroster vents, d...

D. Recirculated air: Press to switch between outside air and recirculated air. When the LED on the button is lit, the air currently inthe passenger compartment is being recirculated. Using recirculated aircan reduce the time needed to cool the interior and reduce unwantedodors from entering your veh...

H. DUAL: Allows the passenger to set their temperature independent of the driver temperature.Press + or - to increase or decrease the air temperature on thepassenger side of the vehicle when in dual zone mode. I. Fan speed control: Press + or - to increase or decrease the volume of air circulated in...

GENERAL OPERATING TIPS Manual Climate Control • To reduce fog build-up on the windshield during humid weather, selectDefrost. You can also improve clearing by increasing the temperatureand fan speed. • To reduce humidity build-up inside the vehicle, do not drive with thesystem off or with recirculat...

Automatic Climate Control • To reduce fog build-up on the windshield during humid weather, selectDefrost. You can also improve clearing by increasing the temperatureand fan speed. • To reduce humidity build-up inside the vehicle, do not drive with thesystem off or with recirculated air engaged. • Do...

Do not use razor blades or other sharp objects to clean the insideof the rear window or to remove decals from the inside of therear window. This may cause damage to the heated grid lines.Your warranty does not cover this damage. Heated Exterior Mirror (If Equipped) Note: Do not remove ice from the m...

REMOTE START CLIMATE OPERATION (IF EQUIPPED) The climate control system adjusts the cabin temperature during remotestart. You cannot adjust the system during remote start operation. In addition,the SYNC display and other displays remain blank during remote startoperation. Turn the ignition on to ret...

SITTING IN THE CORRECT POSITION WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system, resulting inserious injury or death in a crash. Always sit upright against your seatba...

Second row center seat headrestraint (if equipped) The head restraints consist of:A. Energy absorbing head restraint B. Steel stemsC. Guide sleeve adjust and release button D. Guide sleeve unlock and remove button • Raise: Pull up on the head restraint (A). • Lower: Press and hold the guide sleeve a...

To reinstall the non-adjustable head restraint, do the following: • Remove: Pull up the head restraint until it reaches the highestadjustment position and then press and hold the guide sleeve unlockand remove buttons, then pull up on the head restraint. • Reinstall: Align the steel stems into the gu...

MANUAL SEATS Moving the Seats Backward andForward WARNING: Do not adjust the driver’s seat or seatback while the vehicle is moving. WARNING: Rock the seat backward and forward after releasing the lever to make sure that it is fully engaged. Recline Adjustment WARNING: Before returning the seatback t...

MEMORY FUNCTION (IF EQUIPPED) This memory control, located on thedriver’s door, allows automaticpositioning of the driver seat andpower mirrors to two programmablepositions. You may also have thisfeature for the steering column andpower adjustable foot pedals. Programming a memory position Note: You...

Ventilated Seats The ventilated seats will only function when the engine is running. To operate the ventilated seats: Press the ventilated seat symbol to cycle through thevarious cooling settings and off. Cooler settings areindicated by more indicator lights. If the engine falls below 350 RPM while ...

Third Row Seats Accessing the Seat WARNING: Before returning the seat back to its original position, make sure that cargo or any objects are not trapped behind the seat back. After returning the seat back to its originalposition, pull on the seat back to make sure that it has fully latched. Anunlatc...

Unstowing the Third Row Seat WARNING: Make sure the seat is latched to vehicle floor by pushing and pulling on the seat. If not latched, the seat may cause injury during a sudden stop. Note: Make sure that there are no objects such as books, purses or brief cases on the load floor before unstowing t...

Note: In order to allow the seat to complete the stowed position, do not place objects under the seat before stowing. Remove all objects from theseat and stowage tub. Sharp objects may result in damage to the seatupholstery and improper seat function. Note: In the unlikely event that the third row p...

HOMELINK® WIRELESS CONTROL SYSTEM (IF EQUIPPED) WARNING: Make sure that the garage door and security device are free from obstruction when you are programming. Do not program the system with the vehicle in the garage. WARNING: Do not use the system with any garage door opener that does not have the ...

Programming Note: Put a new battery in the hand-held transmitter. This will ensure quicker training and accurate transmission of the radio-frequency signal. 1. With your vehicle parked outside of the garage and your key in theignition, turn the key so that the ignition is in the on position. 2. Hold...

Note: You may need a ladder to reach the unit and you may need to remove the cover orlamp lens on your garage door opener. 5. Press the learn button on the garage dooropener motor, and then you have 30 secondsto complete the next step. 6. Return to your car. 7. Press and hold the function button you...

Programming HomeLink to the Genie Intellicode garage dooropener motor Note: You may need a ladder to access the garage door opener motor. To program HomeLink to the garagedoor opener motor: 1. Press and hold the PROGRAMbutton on the garage door openermotor until both blue LED’s turn on. 2. Release t...

AUXILIARY POWER POINTS WARNING: Do not plug optional electrical accessories into the cigarette lighter socket (if equipped). Improper use of the lighter can cause damage not covered by your warranty, and can result in fireor serious injury. Note: If used when the engine is not running, the battery w...

CENTER CONSOLE Stow items in the cupholder carefully as items may become loose duringhard braking, acceleration or collisions, including hot drinks which mayspill. Available console features include: A. Cupholders B. Utility compartment with audioinput jack, USB port, powerpointand SD card reader C....

Flip the console lid forward, thenlift off the cover to open the coolingcompartment. Make sure to replacethe cover after you using it. Thishelps maintain a more consistentcooling temperature. Refrigerator: Briefly press and hold COOL . The indicator light on the cool side of the switch will illumina...

OVERHEAD CONSOLE The appearance of the overhead console will vary according to youroption package. Press near the rear edge of the doorto open it. Storage Compartments 177 2014 Flex (471) Owners Guide gf, 2nd Printing, November 2013USA (fus)

GENERAL INFORMATION WARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. WARNING: Do not park, idle, or drive your vehicle on dry grass or other dry ground cover. The emission system heats up th...

Ignition Modes Off: Turns the ignition off. • Without applying the brake pedal, press and release the button oncewhen the ignition is in the on mode, or when the engine is runningbut the vehicle is not in motion. Accessory: Allows some electrical accessories to operate while the engine is not runnin...

Fast Restart (Vehicles with Keyless Start) The fast restart feature allows you to restart the engine within20 seconds of switching it off, even if a valid key is not present. Within 20 seconds of switching the engine off, press the brake pedal andpress the button. After 20 seconds have expired, you ...

• During the countdown before engine shutdown, you are prompted topress OK or RESET (depending on your type of information display) to temporarily switch the feature off (for the current ignition cycleonly). Stopping the Engine When Your Vehicle Is Stationary 1. Move the transmission selector lever ...

Guarding Against Exhaust Fumes WARNING: If you smell exhaust fumes inside your vehicle, have this checked immediately. Do not drive your vehicle if you smell exhaust fumes. Carbon monoxide is present in exhaust fumes. Takeprecautions to avoid its dangerous effects. Important Ventilating Information ...

• Make sure that when in operation, the extension cord plug and theheater cord plug connections are free and clear of water. This couldcause an electric shock or fire. • Make sure your vehicle is parked in a clean area, clear ofcombustibles. • Make sure the heater, heater cord and extension cord are...

SAFETY PRECAUTIONS WARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops. Otherwise, fue...

• Avoid getting fuel liquid in your eyes. If fuel is splashed in the eyes,remove contact lenses (if worn), flush with water for 15 minutes andseek medical attention. Failure to seek proper medical attention couldlead to permanent injury. • Fuels can also be harmful if absorbed through the skin. If f...

Octane Recommendations 3.5L/3.7L V6 engines “Regular” unleaded gasoline with a pump (R+M)/2 octane rating of 87 isrecommended. Some stations offer fuels posted as “Regular” with anoctane rating below 87, particularly in high altitude areas. Fuels withoctane levels below 87 are not recommended. 3.5L ...

WARNING: Do not try to pry open or push open the capless fuel system with foreign objects. This could damage the fuel system and its seal and cause injury to you or others. Note: Do not use aftermarket funnels; they will not work with the capless fuel system and can damage it. The included funnel ha...

• Keep the fuel pump nozzle in contact with the fuel container whilefilling. • DO NOT use a device that would hold the fuel pump handle in the fillposition. Easy Fuel® “No Cap” Fuel System WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler door, do not r...

5. Calculate fuel economy as follows: Standard: Divide miles traveled by gallons used. Metric: Multiply liters used by 100, then divide by kilometers traveled. Keep a record for at least one month and record the type of driving (cityor highway). This provides an accurate estimate of the vehicle’s fu...

AUTOMATIC TRANSMISSION WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn the ignition to the off position and remove the key whenever you leave your vehicle. Your vehicle has been designed to improve fuel economy by reducingfuel usage while coasting...

S (Sport) Moving the gearshift lever to S (Sport): • Provides additional grade (engine) braking and extends lower gearoperation to enhance performance for uphill climbs, hilly terrain ormountainous areas. This will increase engine RPM during enginebraking. • Provides additional lower gear operation ...

If your vehicle is equipped with paddles on the steering wheel: • Pull the left paddle (–) todownshift the transmission. • Pull the right paddle (+) to upshiftthe transmission. Upshift to the recommended shift speeds according to the followingchart: Upshifts when accelerating (recommended for best f...

Brake-shift interlock WARNING: Do not drive your vehicle until you verify that the brakelamps are working. WARNING: When doing this procedure, you will be taking the vehicle out of park which means the vehicle can roll freely. To avoid unwanted vehicle movement, always fully set the parking brakepri...

2. Remove the cup holderinsert. 3. Using a screwdriver(or similar tool), releasethe tab to the access doorand remove. 4. Locate the brake shiftinterlock lever on thepassenger side of theshifter assembly. 5. Apply the brake pedal.Using a screwdriver(or similar tool), pressdown and hold the brakeshift...

GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may beworn out. Have them inspected by an authorized dealer. If your vehiclehas continuous vibration or shudder in the steering wheel while br...

PRINCIPLES OF OPERATION The traction control system helps avoid drive wheel spin and loss oftraction. If your vehicle begins to slide, the system applies the brakes to individualwheels and, when needed, reduces engine power at the same time. If thewheels spin when accelerating on slippery or loose s...

PRINCIPLES OF OPERATION WARNING: Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction and wheel or tire size may change the handlingcharacteristics of your vehicle and may adversely affect theperformance of the AdvanceTrac® system. In...

A Vehicle without AdvanceTrac® skidding off its intended route. B Vehicle with AdvanceTrac® maintaining control on a slipperysurface. USING ADVANCETRAC® WITH RSC® The system automatically activates when you start your engine. TheAdvanceTrac® with RSC® system cannot be completely turned off, butthe e...

SENSING SYSTEM (IF EQUIPPED) WARNING: To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed)objects when moving in reverse on a flat surface at parking speeds.Traffic control sy...

If a fault is present in the system, a warning message appears in theinformation display and does not allow the driver to switch the faultedsystem on. Note: If your vehicle is equipped with MyKey®, it is possible to prevent turning the sensing system off. Refer to the MyKey® chapter. Using the Rear ...

The system detects an available parallel parking space and automaticallysteers the vehicle into the space (hands-free) while you control theaccelerator, gearshift and brakes. The system visually and/or audiblyinstructs the driver to park the vehicle. The system may not function correctly if somethin...

When a suitable space is found, the touch screen displays a message anda chime sounds. Slow down and stop at approximately position (A), thenfollow the instructions on the touch screen. Note: You must observe that the selected space remains clear of obstructions at all times in the maneuver. Note: V...

WARNING: Use caution when using the rear video camera and the trunk is ajar. If the trunk is ajar, the camera will be out of position and the video image may be incorrect. All guidelines (if enabled)have been removed when the trunk is ajar. WARNING: Use caution when turning camera features on or off...

Note: When towing, the camera only sees what is being towed behind the vehicle. This might not provide adequate coverage as it usuallyprovides in normal operation and some objects might not be seen.In some vehicles, the guidelines may disappear once the trailer towconnector is engaged. Note: The cam...

Allows the driver to get a closer view of an object behind the vehicle.The zoomed image keeps the bumper in the image to provide areference. The zoom is only active while the transmission is in R(Reverse), When the transmission is shifted out of R (Reverse), thefeature automatically turns off and mu...

PRINCIPLES OF OPERATION Cruise control lets you maintain a set speed without keeping your footon the accelerator pedal. USING CRUISE CONTROL WARNING: Do not use cruise control in heavy traffic, on winding roads or when the road surface is slippery. This could result in loss of vehicle control, serio...

WARNING: Do not use the adaptive cruise control when entering or leaving a highway, in heavy traffic or on roads that are winding, slippery or unpaved. WARNING: Do not use in poor visibility, specifically fog, rain, spray or snow. Note: It is your responsibility to stay alert, drive safely and be in...

Hilly Condition Usage Note: An audible alarm sounds and the system shuts down if it is applying brakes for an extended period of time. This allows the brakes tocool down. The system will function normally again when the brakeshave cooled down. You should select a lower gear position when the system ...

Detection issues can occur: A. When driving on a different linethan the vehicle in front. B. With vehicles that edge into yourlane. The system can only detectthese vehicles once they move fullyinto your lane. C. There may be issues with thedetection of vehicles in front whendriving into and coming o...

Blocked Sensor WARNING: Do not use ACC when towing a trailer with brake controls. Aftermarket trailer brakes will not function properly when ACC is activated because the brakes are electronically controlled.Failing to do so may result in loss of vehicle control, which could resultin serious injury. ...

Cause Action You are in a desert or remote areawith no other vehicles and noroadside objects. Wait a short time or switch tonormal cruise control. Due to the nature of radar technology, it is possible to get a blockagewarning and not be blocked. This can happen, for example, when drivingin sparse ru...

BLIND SPOT INFORMATION SYSTEM (BLIS®) WITH CROSSTRAFFIC ALERT (CTA) (IF EQUIPPED) WARNING: To help avoid injuries, NEVER use the BLIS® as a replacement for using the interior and exterior mirrors and looking over your shoulder before changing lanes. BLIS® is not areplacement for careful driving and ...

Using the Systems BLIS® turns on when the engine is started and the vehicle is drivenforward above 3 mph (5 km/h); it remains on while the transmission is inD (Drive) and N (Neutral). If shifted out of D (Drive) or N (Neutral),the system enters CTA mode. Once shifted back into D (Drive), BLIS®turns ...

Zone coverage also decreases when parking at shallow angles. Here, theleft sensor is mostly obstructed; zone coverage on that side is severelylimited. System Lights and Messages The BLIS® and CTA systemsilluminate a yellow alert indicator inthe outside mirror on the side ofthe vehicle the approachin...

System Sensors WARNING: Just prior to the system recognizing a blocked condition and alerting the driver, the number of missed objects will increase. To help avoid injuries, NEVER use the BLIS® as areplacement for using the side and rear view mirrors and looking overyour shoulder before changing lan...

Switching the Systems Off and On One or both systems can be switched off temporarily by using theinformation display control; refer to the Information Display chapter. When the BLIS® is switched off, the driver does not receive alerts andthe information display shows BLIND SPOT SYS OFF and/or CTASYS...

If it is, a red warning lightilluminates and an audible warningchime sounds. The brake support system assists the driver in reducing the collisionspeed by charging the brakes. If the risk of collision further increasesafter the warning light illuminates, the brake support prepares the brakesystem fo...

WARNING: The electric power steering system has diagnostic checks that continuously monitor the system to ensure proper operation of the electronic system. When an electronic error isdetected, a message will be displayed in the information display.If this happens, stop the vehicle in a safe place, a...

CARGO NET (IF EQUIPPED) WARNING: The cargo net is not designed to restrain objects during a collision or heavy braking. The cargo net secures lightweightobjects in the cargo area. Attach thenet to the anchors provided. Do notput more than 50 pounds(22 kilograms) in the net. ROOF RACKS AND LOAD CARRI...

For correct roof rack system function, you must place loads directly oncrossbars affixed to the roof rack side rails. We recommend you use FordGenuine Accessory crossbars designed specifically for your vehicle. Make sure that you securely fasten the load. Check the tightness of theload before drivin...

Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Label on the B-Pillar or the edge of the driver’s door(vehicles exported outside the US and Canada may not have a TireLabel). Look for “THE COMBINED WEI...

Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue loadweight is also part of cargo weight. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all pa...

GVWR (Gross Vehicle Weight Rating) – is the maximum allowable weight of the fully loaded vehicle (including all options, equipment,passengers and cargo). The GVWR is shown on the Safety Compliance Certification Label. The label shall be affixed toeither the door hinge pillar, door-latch post, or the...

WARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structuraldamage, serious damage to the vehicle, loss of control and personalinjury. GCW (Gross Combined Weight) – is the...

WARNING: Exceeding any vehicle weight rating limitation could result in serious damage to the vehicle and/or personal injury. Steps for determining the correct load limit: 1. Locate the statement “The combined weight of occupants and cargoshould never exceed XXX kg or XXX lbs.” on your vehicle’s pla...

TOWING A TRAILER WARNING: Do not exceed the GVWR or the GAWR specified on the certification label. WARNING: Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of your vehicle and could result in engine damage, transmission damage, structural damage, lossof vehicle ...

TRAILER SWAY CONTROL (IF EQUIPPED) WARNING: Turning off trailer sway control increases the risk of loss of vehicle control, serious injury or death. Ford does not recommend disabling this feature except in situations where speedreduction may be detrimental (such as hill climbing), the driver hassign...

Powertrain and towing class Maximum GCWR Maximum trailer weight 3.5L TiVCT front-wheeldrive, Class I 6900 lb (3131 kg) 2000 lb (907 kg) 3.5L TiVCT all-wheeldrive, Class I 7050 lb (3199 kg) 2000 lb (907 kg) 3.5L GTDI all-wheeldrive, Class I 7072 lb (3209 kg) 2000 lb (907 kg) 3.5L TiVCT front-wheeldri...

Remember to account for the trailer tongue weight as part of yourvehicle load when calculating the total vehicle weight. Trailer Towing Connector (Vehicles with a Trailer Towing Packageand 7–Pin Connector) When attaching the trailer wiring connector toyour vehicle, only use a proper fitting connecto...

When hooking-up a trailer using a weight-distributing hitch, always usethe following procedure:1. Park your vehicle, without the trailer, on a level surface.2. Measure the height of the top of your vehicle’s front wheel opening on the fender. This is H1. 3. Attach the trailer to your vehicle without...

Trailer Brake Controller Connector (If Equipped) The connector is located under theinstrument panel above the brakepedal. Trailer Lamps WARNING: Never connect any trailer lamp wiring to the vehicle’s tail lamp wiring; this may damage the electrical system resulting in a fire. Contact an authorized d...

TRANSPORTING THE VEHICLE If you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, yourroadside assistance service provider. We recommend the use of a wheel lift and dollies or flatbed equipmentto tow your vehicle. Do not t...

Towing an all-wheel drive vehicle requires that all wheels be off theground, such as using a wheel lift and dollies or flatbed equipment. Thisprevents damage to the transmission, all-wheel drive system and vehicle. TOWING THE VEHICLE ON FOUR WHEELS Emergency Towing If your vehicle becomes inoperable...

BREAKING-IN You need to break in new tires for approximately 300 miles(480 kilometers). During this time, your vehicle may exhibit some uniquedriving characteristics. Avoid driving too fast during the first 1000 miles(1600 kilometers). Vary your speed frequently and change up throughthe gears early....

• Add particular accessories to your vehicle (e.g.; bug deflectors,rollbars or light bars, running boards, ski racks). • Drive with the wheels out of alignment. DRIVING THROUGH WATER WARNING: Drive through water in an emergency only, and not as part of normal driving. WARNING: Engine damage can occu...

FLOOR MATS WARNING: Always use floor mats that are designed to fit the foot well of your vehicle, leaving the pedal area unobstructed, and which can be firmly secured to retention posts so that they cannotslip out of position and interfere with the pedals or impair safeoperation of your vehicle in o...

ROADSIDE ASSISTANCE Vehicles Sold in the United States: Getting Roadside Assistance To fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary Roadside Assistance program. Thisprogram is separate from the New Vehicle Limited Warranty. • 24 hours a day, seven days...

If you need to arrange roadside assistance for yourself, Ford MotorCompany will reimburse a reasonable amount for towing to the nearestdealership within 35 miles (56.3 kilometers). To obtain reimbursementinformation, U.S. Ford vehicle customers call 1-800-241-3673. Customerswill be asked to submit t...

Connecting the Jumper Cables WARNING: Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery. Note: Do not attach the negative (-) cable to fuel lines, engine rocker covers, the intake...

Removing the Jumper Cables Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. Remove the jumper cables in the reverse order that they wereconnected. 1. Remove the jumper cable fromthe ground metal surface. 2. Remove the jumper cable on thenega...

GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorizeddealer. While any authorized dealer handling your vehicle line willprovide warranty service, we recommend you return to your sellingauthorized dealer who wants to ensure your continued satisfaction. Plea...

• Ford Genuine Accessories • Service specials and promotions. In Canada: Mailing address Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6K 1C8 Telephone 1-800-565-3673 (FORD) Online www.ford.ca Additional Assistance If you have questions or concerns,...

UTILIZING THE MEDIATION or ARBITRATION PROGRAM(CANADA ONLY) This pertains to vehicles delivered to authorized Canadian dealers. Inthose cases, where you continue to feel that the efforts by Ford ofCanada and the authorized dealer to resolve a factory-related vehicleservice concern have been unsatisf...

If your vehicle must be serviced while you are traveling or livingin the Middle East, contact the nearest authorized dealer. If theauthorized dealer cannot help you, contact: Ford Middle EastCustomer Relationship Center P.O. Box 21470Dubai, United Arab EmiratesTelephone: +971 4 3326084Toll-Free Numb...

Obtaining a French Owner’s Manual A French owner’s manual can be obtained from your authorized dealer orby contacting Helm, Incorporated using the contact information listedpreviously in this section. REPORTING SAFETY DEFECTS (U.S. ONLY) If you believe that your vehicle hasa defect which could cause...

CHANGING A FUSE Fuses WARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. If electrical components in yourvehicle are not working, a fuse mayhave blown. Blown fuses areidentifi...

FUSE SPECIFICATION CHART Power Distribution Box WARNING: Always disconnect the battery before servicing high current fuses. WARNING: To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs. The power dis...

Passenger Compartment Fuse Panel The fuse panel is located under the instrument panel to the left of thesteering wheel. You may need to remove a trim panel to access it. The fuses are coded as follows: Fuse or relay number Fuse amp rating Protected components 1 30A Driver side front window 2 15A Mem...

Fuse or relay number Fuse amp rating Protected components 28 15A Not used (spare) 29 20A Radio, Global positioning systemmodule 30 15A Front park lamps, Trailer towrelay for park lamps, Front sidemarkers 31 5A Trailer tow controller 32 15A Driver window switch and motor,Power lock switches, Moonroof...

Fuse or relay number Fuse amp rating Protected components 48 30A Circuit Breaker Front passenger power window,Rear power windows 49 Delayed accessory relay Body control module 288 Fuses 2014 Flex (471) Owners Guide gf, 2nd Printing, November 2013USA (fus)

GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthinessand resale value. There is a large network of Ford authorized dealerswho are there to help you with their professional servicing expertise. Webelieve that their specially trained technicians are best qualifie...

OPENING AND CLOSING THE HOOD 1. Inside the vehicle, pull the hoodrelease handle located under thebottom of the instrument panel nearthe steering column. 2. Go to the front of the vehicle andrelease the auxiliary latch that islocated under the front center ofthe hood. 3. Lift the hood. PUSH ON OFF 29...

UNDER HOOD OVERVIEW 3.5L V6 engine A. Engine coolant reservoir B. Windshield washer fluid reservoir C. Brake fluid reservoir D. Battery E. Power distribution box F. Air filter assembly G. Automatic transmission fluid dipstick H. Engine oil dipstick I. Engine oil filler cap A I H G F B C D E Maintena...

3.5L V6 EcoBoost® Engine A. Engine coolant reservoir B. Brake fluid reservoir C. Battery D. Power distribution box E. Air filter assembly F. Automatic transmission fluid dipstick (out of view) G. Engine oil dipstick H. Engine oil filler cap I. Windshield washer fluid reservoir A B C D E F G H I 292 ...

Engine shield Some vehicles may be equipped with an aero-shield under the engine.This shield needs to be removed for service, including oil and filterchanges. It is secured with four quick release fasteners. ENGINE OIL DIPSTICK 3.5L and 3.5L EcoBoost A. MIN B. MAX ENGINE OIL CHECK Note: Check the le...

Adding Engine Oil Note: Do not remove the filler cap when the engine is running. Note: Do not add engine oil further than the MAX mark. Oil levels above the MAX mark may cause engine damage. Only use oils certified for gasoline engines by theAmerican Petroleum Institute (API). An oil with thistradem...

Adding Engine Coolant WARNING: Do not add engine coolant when the engine is hot. Steam and scalding liquids released from a hot cooling system can burn you badly. Also, you can be burned if you spill coolant on hotengine parts. WARNING: Do not put engine coolant in the windshield washer fluid contai...

• Do not use alcohol, methanol, brine or any engine coolants mixed withalcohol or methanol antifreeze (coolant). Alcohol and other liquids cancause engine damage from overheating or freezing. • Do not add extra inhibitors or additives to the coolant. These can beharmful and compromise the corrosion ...

Vehicles driven year-round in non-extreme climates should useprediluted engine coolant for optimum cooling system and engineprotection. Engine fluid temperature management (EcoBoost engine only) WARNING: To reduce the risk of collision and injury, be prepared that the vehicle speed may reduce and th...

3. Turn the engine off and wait for it to cool before checking the coolantlevel. WARNING: Never remove the coolant reservoir cap while the engine is running or hot. 4. If the coolant level is normal, you may restart your engine andcontinue on. 5. If the coolant is low, add coolant, restart the engin...

When Fail-Safe Mode is Activated WARNING: Fail-safe mode is for use during emergencies only. Operate the vehicle in fail-safe mode only as long as necessary to bring the vehicle to rest in a safe location and seek immediate repairs.When in fail-safe mode, the vehicle will have limited power, will no...

8. Rotate the air filter assembly90 degrees counterclockwise andreinstall into the rubber hose. 9. Tighten the clamp (1). 10. The transmission fluid level indicator can now be accessed. Low fluid level If the fluid level is below the MINrange of the dipstick, add fluid toreach the hash mark level. N...

4. Seat the air filter assembly back into the grommets by pushing downon the air filter assembly. 5. Tighten the clamp. 6. Install and tighten two bolts that attach air filter assembly to the frontof the vehicle. 7. Install the bolt cover (if equipped). 8. Reinstall the harness retaining clip into t...

Washer fluids containing non-methanol antifreeze agents should be usedonly if they provide cold weather protection without damaging thevehicle’s paint finish, wiper blades or washer system. CHANGING THE VEHICLE BATTERY WARNING: Batteries normally produce explosive gases which can cause personal inju...

If you see any corrosion on the battery or terminals, remove the cablesfrom the terminals and clean with a wire brush. You can neutralize theacid with a solution of baking soda and water. It is recommended that the negative battery cable terminal bedisconnected from the battery if you plan to store ...

CHECKING THE WIPER BLADES Run the tip of your fingers over the edge of the bladeto check for roughness. Clean the wiper blades with washer fluid or waterapplied with a soft sponge or cloth. CHANGING THE WIPER BLADES 1. Pull the wiper arm away from thevehicle. Turn the blade at an anglefrom the wiper...

3. The wiper arm has a snapretention feature to receive a crosspin from the wiper blade structure.Grip tightly and press on thearm/blade joint from beneath andseparate the blade from the arm. Avoid rotating the wiper blade structure and trapping your left handbetween the arm and blade. 4. Attach the...

Changing the air filter element 3.5L V6 engine 3.5L V6 EcoBoost engine 1. On the passenger’s side of the air filter housing, release the twoclamps from the air filter housing cover. 2. Lift the passenger’s side of the cover and pushthe cover toward the passenger’s side. Release thethree tabs on the ...

On the wall or screen you willobserve a flat zone of high intensitylight located at the top of the righthand portion of the beam pattern.If the top edge of the high intensitylight zone is not at the horizontalreference line, the headlamp willneed to be adjusted. 4. Locate the vertical adjuster oneac...

These are examples of unacceptable moisture (usually caused by a lampwater leak): • Water puddle inside the lamp. • Large water droplets, drip marks or streaks present on the interior ofthe lens. Take your vehicle to a dealer for service if any of the above conditions ofunacceptable moisture are pre...

Replacing rear stop/tail/turn/backup and side marker lamp bulbs The stop/tail/turn/backup and side marker lamp bulbs are located in thetail lamp assembly. Note: Your vehicle may be equipped with a stop/tail/turn and side marker lamp assemblies containing integral multiple light emitting diodes(LED)....

• Spray Motorcraft Engine Shampoo and Degreaser on all parts thatrequire cleaning and pressure rinse clean. In Canada, use MotorcraftEngine Shampoo. • Never wash or rinse the engine while it is hot or running; water in therunning engine may cause internal damage. • Never wash or rinse any ignition c...

CLEANING THE INTERIOR WARNING: Do not use cleaning solvents, bleach or dye on the vehicle’s safety belts, as these actions may weaken the belt webbing. WARNING: On vehicles equipped with seat-mounted airbags, do not use chemical solvents or strong detergents. Such products could contaminate the side...

• Do not use household cleaning products, alcohol solutions,oil/petroleum-based leather conditioners, or solvents or cleanersintended specifically for rubber, vinyl and plastics. These productsmay cause premature wearing or damage to the leather. CLEANING THE ALLOY WHEELS Note: Do not use chrome cle...

Battery • Check and recharge as necessary. Keep connections clean. • If storing your vehicle for more than 30 days without recharging thebattery, it may be advisable to disconnect the battery cables to ensurebattery charge is maintained for quick starting. Note: If battery cables are disconnected, i...

GENERAL INFORMATION Notice to Crossover Vehicle Owners Crossover vehicles handle differentlythan passenger cars in the variousdriving conditions that areencountered on streets, highways andoff-road. Crossover vehicles are notdesigned for cornering at speeds ashigh as passenger cars any more thanlow-...

TIRE CARE Information About Uniform Tire Quality Grading Tire Quality Grades apply to newpneumatic passenger car tires. The TireQuality Grades can be found whereapplicable on the tire sidewall betweentread shoulder and maximum sectionwidth. For example: • Treadwear 200 Traction AA Temperature A Thes...

Traction AA A B C WARNING: The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning or peak traction characteristics. The traction grades, from highest to lowest are AA, A, B, and C. Thegrades represent the...

Information on P Type Tires P215/65R15 95H is an example of atire size, load index and speedrating. The definitions of theseitems are listed below. (Note thatthe tire size, load index and speedrating for your vehicle may bedifferent from this example.) A. P: Indicates a tire, designated by the Tire ...

time under a standard condition of load and inflation pressure. The tireson your vehicle may operate at different conditions for load and inflationpressure. These speed ratings may need to be adjusted for the differencein conditions. The ratings range from 81 mph (130 km/h) to 186 mph(299 km/h). The...

Additional Information Contained on the Tire Sidewall for LT TypeTires LT type tires have some additionalinformation beyond those of P typetires. These differences aredescribed below. Note: Tire Quality Grades do not apply to this type of tire. A. LT: Indicates a tire, designated by the Tire and Rim...

Information on T Type Tires T type tires have some additionalinformation beyond those of P typetires. These differences aredescribed below. T145/80D16 is an example of a tiresize. Note: The temporary tire size for your vehicle may be different fromthis example. Tire Quality Gradesdo not apply to thi...

INFLATING YOUR TIRES Safe operation of your vehicle requires that your tires are properlyinflated. Remember that a tire can lose up to half of its air pressurewithout appearing flat. Every day before you drive, check your tires. If one looks lower than theothers, use a tire gauge to check pressure o...

WARNING: Age Tires degrade over time depending on many factors such as weather, storage conditions, and conditions of use (such as load, speed,inflation pressure) the tires experience throughout their lives.In general, tires should be replaced after six years regardless of treadwear. However, heat c...

Tire Replacement Requirements WARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus LT-metric or all-season versus all-terrain) as those originallyprovided by Ford. The recommended tire and wheel size may be foundon either t...

Safety Practices WARNING: If your vehicle is stuck in snow, mud, or sand, do not rapidly spin the tires. Spinning the tires can tear the tire and cause an explosion. A tire can explode in as little as three to fiveseconds. WARNING: Do not spin the wheels at over 35 mph (56 km/h). The tires may fail ...

The tires should also be balanced periodically. An unbalanced tire andwheel assembly may result in irregular tire wear. Tire Rotation Note: If your tires show uneven wear ask an authorized dealer to check for and correct any wheel misalignment, tire imbalance or mechanicalproblem involved before tir...

Note: The suspension insulation and bumpers will help prevent vehicle damage. Do not remove these components from your vehicle when usingsnow tires and chains. The tires on your vehicle have all-weather treads to provide traction inrain and snow. However, in some climates, you may need to use snowti...

Changing Tires with a Tire Pressure Monitoring System Note: Each road tire is equipped with a tire pressure sensor locatedinside the tire and wheel assemblycavity. The pressure sensor isattached to the valve stem. Thepressure sensor is covered by thetire and is not visible unless thetire is removed....

When You Believe Your System Is Not Operating Properly The main function of the tire pressure monitoring system is to warn youwhen your tires need air. It can also warn you in the event the system isno longer capable of functioning as intended. See the following chart forinformation concerning your ...

Low tirepressurewarning light Possible cause Customer action required Flashingwarning light Spare tire in use Repair the damaged road wheel and tire assembly and reinstall it onthe vehicle to restore systemfunction. For a description on howthe system functions, see When Your Temporary Spare Tire isI...

CHANGING A ROAD WHEEL WARNING: The use of tire sealants may damage your tire pressure monitoring system and should not be used. However, if you must use a sealant, have an authorized dealer install a new tirepressure monitoring system sensor and valve stem. WARNING: See Tire Pressure Monitoring Syst...

• Winter weather driving capability • Wet weather driving capability • All-Wheel driving capability • Load leveling adjustment When driving with the full-size dissimilar spare tire and wheel assembly,additional caution should be given to: • towing a trailer. • driving vehicles equipped with a camper...

Stowing the tire and jack 1. Fully collapse the jack, fold thelug wrench socket into the handleand place the jack and wrench intothe felt bag as shown. Place theextension bolt or L-shaped bolt intothe external pocket of the felt bag.Take care to position the jack asshown to make sure that thelocatin...

If you are stowing the flat tire,remove the L-shaped bolt from theexternal pocket of the felt bag.With the third row seat in the raisedposition, stand the flat tire in therear of the vehicle with the tire’svalve stem facing the rear of thevehicle. Fasten the flat tire to thevehicle by inserting the ...

Note: Inspect the wheel pilot hole and mounting surface prior toinstallation. Remove any visiblecorrosion or loose particles. Wheels and Tires 355 2014 Flex (471) Owners Guide gf, 2nd Printing, November 2013USA (fus)

ENGINE SPECIFICATIONS Engine 3.5L V6 engine 3.5L V6 EcoBoost engine Cubic inches 214 214 Fuel See Octane recommendations in the Fuel and Refueling chapter. See Octane recommendations in the Fuel and Refueling chapter. Firing order 1–4–2–5–3–6 1–4–2–5–3–6 Spark plug gap 0.049-0.053 inch (1.25-1.35 mm...

MOTORCRAFT™ PART NUMBERS Component 3.5L V6 Engine 3.5L V6 EcoBoostEngine Engine air filterelement FA-1884 FA-1884 Battery BXT-65-650 BXT-65-750 Oil filter FL-500-S FL-500-S Spark Plugs 1 SP-520 SP-528 Cabin air filter FP68 FP68 Seat air filter FS-104 FS-104 Windshield wiperblade WW-2401-PF (driver s...

The Vehicle Identification Number (VIN) contains the followinginformation: A. World manufacturer identifier B. Brake system / Gross VehicleWeight Rating (GVWR) / RestraintDevices and their location C. Make, vehicle line, series, bodytype D. Engine type E. Check digit F. Model year G. Assembly plant ...

ACCESSORIES For a complete listing of the accessories that are available for yourvehicle, please contact an authorized dealer or visit our online store at www.Accessories.Ford.com (United States only). Ford Motor Company will repair or replace any properly authorizeddealer-installed Ford Genuine Acc...

Peace of mind • Remote start • Wheel locks • Locking fuel plug for capless fuel systems • Vehicle security • Full vehicle covers* • Bumper and hitch mounted parking sensors* *The accessory manufacturer designs, develops and therefore warrantsFord Licensed Accessories, and does not design or test the...

FORD ESP EXTENDED SERVICE PLANS PROTECT YOURSELF FROM THE RISING COST OF VEHICLE REPAIRSWITH A FORD EXTENDED SERVICE PLAN. SERVICE PLANS (U.S. only) More than 32 Million Ford and Lincoln owners have discovered thepowerful protection Ford ESP. It is the only extended service planbacked by Ford Motor ...

GENERAL INFORMATION Radio Frequencies and Reception Factors AM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Canadian Radio and TelecommunicationsCommission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.9–107.7, 107.9 MHz Radio reception...

MP3 Track and Folder Structure Audio systems capable of recognizing and playing MP3 individual tracksand folder structures work as follows: • There are two different modes for MP3 disc playback: MP3 trackmode (system default) and MP3 folder mode. • MP3 track mode ignores any folder structure on the ...

MyFord® SYSTEM WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We recommend agai...

C. Memory presets: • In radio mode, store your favorite radio stations. To store a radiostation, tune to the station, then press and hold a preset button untilsound returns. • In CD mode, press one of these buttons to select a track. D. Function buttons: Select different functions of the audio syste...

M. PHONE: Press this button to access the phone features of the SYNC system. See the SYNC chapter for more information. N. AUX: Press this button to access your auxiliary input jack or switch between devices you plug into the input jack or USB port. See Auxiliary input jack later in this chapter. O....

SIRIUS Channel Guide Select to view available satellite radiochannels. Press OK to open a list of the following options for this channel: TuneChannel, Skip Channel or Lock Channel. Onceyou skip or lock a channel, you can only accessit by pressing Direct and entering the channelnumber. Locking or unl...

When HD Radio broadcasts are active, you can access the followingfunctions: When you select: You can: Scan Hear a brief sampling of all available stations.This feature still works when HD Radioreception is on, although it does not scan forHD2-HD7 channels. You may see the HD logoappear if the statio...

HD Radio Reception and Station Troubleshooting Potential reception issues Reception area If you are listening to a multicast station andyou are on the fringe of the reception area,the station may mute due to weak signalstrength.If you are listening to HD1, the systemswitches back to the analog broad...

SATELLITE RADIO INFORMATION (IF EQUIPPED) Satellite Radio Channels Sirius broadcasts a variety of music, news, sports, weather, traffic andentertainment satellite radio channels. For more information and acomplete list of Sirius satellite radio channels, visit www.siriusxm.com inthe United States, w...

Sirius satellite radio is asubscription-based satellite radioservice that broadcasts a variety ofmusic, sports, news, weather, trafficand entertainment programming.Your factory-installed Sirius satelliteradio system includes hardware and a limited subscription term which begins on the date of sale o...

When using SYNC: • Do not operate playing devices if the power cords or cables arebroken, split or damaged. Place cords and cables out of the way, sothey do not interfere with the operation of pedals, seats,compartments or safe driving abilities. • Do not leave playing devices in your vehicle during...

To access:1. Press MENU during an active call.2. When Active Call Menu is selected, press OK.3. Scroll to cycle through the following options: When you select: You can: Mute Call? Mute the call. Privacy Switch a call from an active hands-freeenvironment to your cellular phone for a moreprivate conve...

When you select: You can: Call History Access your call history log.1. Press OK to select, then scroll throughyour call history options (incoming, outgoingor missed).2. Press OK when the desired selectionappears in the display.3. Press the phone button to call theselection. Return Exit the current m...

Text Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages.The system can also read incoming text messages to you so that you donot have to take your eyes off the road. Receiving a Text Message Note: This is a phone-dependent feature. ...

Download Unread Msgs allows you to download your unread messages (only) to SYNC. To download the messages, press OK to select. Thedisplay indicates your messages are being downloaded. When complete,SYNC takes you to your inbox. Delete All Messages? allows you to delete current text messages from SYN...

Pre-defined text message options I need more directions I love you Too funny Can’t wait to see you I’m stuck in traffic Accessing Your Phone Settings These are phone-dependent features. Your phone settings allow you toaccess and adjust features such as your ring tone, text messagenotification, modif...

When you select: You can: Modify Phonebook Modify the contents of your phone book(such as add, delete, download). Press OK toselect and scroll between: Add Contacts: Press OK to add more contactsfrom your phone book. Push the desiredcontact(s) on your phone. See your phone’suser guide on how to push...

The Advanced menu allows you to access and set prompts, languages,defaults, perform a master reset, install an application and view systeminformation. Bluetooth Devices Menu Options This menu allows you to add, connect, delete, set a phone as primary,and turn Bluetooth on or off.1. Press the phone b...

If you select: You can: Delete Device Delete a paired phone.Press OK and scroll to select the device.Press OK to confirm. Delete All Devices Delete all previously paired phones (and allinformation originally saved with thosephones).Press OK to select. Return Exit the current menu. * This is a speed-...

If you select: You can: Factory Defaults Return to the factory default settings. Thisselection does not erase your indexedinformation (phonebook, call history, textmessages and paired devices).1. Press OK to select and then press OK againwhen Restore Defaults? appears in the display.2. Press OK to c...

If the call is not cancelled and a successful call is made, a pre-recordedmessage is played for the 911 operator, then the occupant(s) in thevehicle is able to talk with the operator. Be prepared to provide yourname, phone number and location immediately, because not all 911systems are capable of re...

Note: In order to allow a break-in period for your vehicle, you may not be able to create a Vehicle Health Report until your vehicle odometer hasreached 200 miles. Register for Vehicle Health Report and set your report preferences atwww.SYNCMyRide.com. After registering, you can request a VehicleHea...

Vehicle Health Report options Run Report? Press OK for SYNC to run a health report ofyour vehicle’s diagnostic systems and send theresults to Ford where it is combined withscheduled maintenance information, openrecalls and other field service actions andunserviced vehicle inspection items from youra...

Disconnecting from SYNC Services 1. Press and hold the phone button on the steering wheel.2. Say “Good-bye” from the SYNC Services main menu. SYNC Services quick tips Personalizing You can personalize your Services feature toprovide quicker access to your most used orfavorite information. You can sa...

Connecting Your Digital Media Player via the USB Port Note: If your digital media player has a power switch, ensure that the device is turned on. To connect using voice commands:1. Plug the device into the vehicle’s USB port.2. Press the voice icon and when prompted, say “USB”.3. You can now play mu...

“USB” “Shuffle on” “Similar music” “What’s playing?” 1 “<name>” is a dynamic listing, meaning that it could be the name of any desired group, artist, etc. 2 Voice commands which are only available in folder mode. 3 Voice commands which are not available until indexing is complete. Voice comman...

Press the voice icon and when prompted say “Bluetooth Audio” and thenany of the following: “BLUETOOTH AUDIO” “(Phone) (Media) (Bluetooth) Connections” “Pause” “Play” “Play next track ” “Play previous track ” Media Menu Features The media menu allows you to select your media source, how to playyour m...

When you select: You can: Select Source SYNC USB: Press OK to access music plugged into your USB port. You can also plugin devices to charge them (if supported byyour device). Once connected, the systemindexes any readable media files. (The timerequired to complete this depends on the sizeof the med...

When you select: You can: Media Settings Choose to shuffle or repeat your music andselect your Autoplay settings. Once theseselections are turned on, they remain on untilturned off. Press SEEK to play the previousor next track. Note: Some digital media players require both USB and line in ports to s...

When you select: You can: Similar Music Play music similar to what is currently playingfrom the USB port. The system uses themetadata information of each song to compilea playlist for you.Press OK to select. The system creates a newlist of similar songs and begins playing. Themetadata tags must be p...

Vehicle Health Report and SYNC Services (Traffic, Directions and Information) issues Issue Possible cause(s) Possible solution(s) I received a textthat the VehicleHealth Report isnot activated. • Your account may not beactivated on thewebsite, OR • You may have the wrong VIN(vehicleidentificationnum...

INTRODUCTION WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We recommend agains...

SETTINGS Press to select any of the following: • Clock • Display • Sound • Vehicle • Settings • Help HOME Press to access your home screen. Depending on your vehicle’s optionpackage and software, your screens may vary in appearance from thedescriptions in this section. Your features may also be limi...

Support The SYNC support team is available to help you with any questions youaren’t able to answer on your own. Monday-Saturday, 8:30 am-8pm EST In the United States, call: 1–888–270–1055 In Canada, call: 1–800–565–3673 Times are subject to change due to holidays. Safety information WARNING: Driving...

Privacy information When a cellular phone is connected to SYNC®, SYNC® creates a profilewithin your vehicle that is linked to that cellular phone. This profile iscreated in order to offer you more cellular features and to operate moreefficiently. Among other things, this profile may contain data abo...

ACCESSING AND ADJUSTING MODES THROUGH YOUR RIGHTVEHICLE INFORMATION DISPLAY (IF EQUIPPED) The display is located on the right side of your instrument cluster. Youcan use your steering wheel controls to view and make minoradjustments to active modes without taking your hands off the wheel.For example...

These commands can be said at any time. “Cancel” “Exit” “Go back” “List of commands” “Main menu” “Next page” “Previous page” “What can I say?” “Help” What Can I Say? To access the available voice commands for the current session, do oneof the following: • During a voice session, press the Help icon ...

Press the voice icon on the steering wheel. When prompted,you can say: “BROWSE” within devices “Browse” * “Browse <league> games” ** “Browse <Sirius category> channels” ** “Browse Sirius channel guide” ** “Browse SD card” “Browse USB” “Help” * If you have said “Browse”, you can then say ...

satellite radio). Note: This is only available when your MyFord Touch system language is set to North American English. “AM <530 - 1710>” “FM <87.9 – 107.9>” “<530 - 1710>” “<87.9 – 107.9>” “Sirius <0-223>” * “<Channel name>” * “Play [genre] <name>” ** “Play...

Radio Voice Commands If you are listening to the radio, press the voice button on thesteering wheel control. When prompted, say any of thecommands in the following chart. If you are not listening to the radio, press the voice button and, after thetone, say “Radio”, then any of the commands in the fo...

“TUNE” “<87.9–107.9>” “FM autoset” “<87.9-107.9> HD <#>” * “FM autoset preset <#>” “<530–1710>” “FM preset <#>” “AM” “FM1” “AM <530–1710>” “FM 1 preset <#>” “AM autoset” “FM2” “AM autoset preset <#>” “FM 2 preset <#>” “AM preset <#>” ...

“TUNE” “Sirius <0–223>” “<Channel name>” “Preset <#>” “SAT” “SAT 1” “SAT 1 preset <#>” “SAT 2” “SAT 2 preset <#>” “SAT 3” “SAT 3 preset <#>” “Help” Sirius Satellite Radio Information Note: Sirius reserves the unrestricted right to change, rearrange, add or delete ...

Sirius troubleshooting tips Radio display Condition Possible action Unsubscribed Channel. Your subscription does not include thischannel. Contact Sirius at1–888–539–7474 tosubscribe to thechannel, or tune toanother channel. No Signal. The signal is lost fromthe Sirius satellite orSirius tower to you...

“CD” “Pause” “Repeat off” “Play” “Repeat track” “Play next track” “Shuffle” “Play previous track” “Shuffle CD” * “Play track <1–512>” “Shuffle folder” * “Repeat” “Shuffle off” “Repeat folder” * “Help” * This applies to WMA or MP3 files only. SD Card Slot and USB Port SD Card Slot Note: Your SD...

• Media Player Settings allows you to select more settings, which is under Media Player. See Settings. • Device Information displays software and firmware information about the currently connected media device. • Update Media Index indexes your device each time you connect it to make sure you have t...

Supported Media Players, Formats and Metadata Information SYNC is capable of hosting nearly any digital media player, includingiPod®, Zune™, plays from device players, and most USB drives.Supported audio formats include MP3, WMA, WAV and AAC.It is also able to organize your indexed media from your p...

6. Press the lower left corner on the touchscreen. Select the A/V In tab. (You should hear audio from your portable music player although itmay be low.) 7. Adjust the sound on your portable music player until it reaches the level of the FM station or CD by switching back and forth betweenthe control...

PHONE A. Phone B. Quick Dial C. Phonebook D. History E. Messaging F. Settings Hands-free calling is one of the main features of SYNC. Once you pairyour phone, you can access many options using the touchscreen or voicecommands. While the system supports a variety of features, many aredependent on you...

3. If you are prompted to enter a PIN on your device, it does not support Secure Simple Pairing. To pair, enter the PIN displayed onthe touchscreen. Skip the next step. 4. When prompted on your phone’s display, confirm that the PIN provided by SYNC matches the PIN displayed on your cellular phone. 5...

Roaming Warning Touch this button to have the system alert you when your phone is inroaming mode. Phone Voice Commands Press the voice button on the steering wheel control. After thetone, say any of the following commands: “PHONE” “Call” “Join calls” * “Call <name>” “Listen to text message <...

INFORMATION If your vehicle is equipped with Navigation, touch the i(Information) button to access these features. If your vehicle isnot equipped with Navigation, touch the corner of the touchscreen with the green tab. Under the Information menu, you can access features, such as: A. SYNC Services B....

Connecting to SYNC Services Using the Touchscreen If your vehicle is equipped with Navigation, touch the i(Information) button to access these features. If your vehicle isnot equipped with Navigation, touch the corner of the touchscreen with the green tab. Press Services. 1. Select Connect to Servic...

If your vehicle is equipped with Navigation, SYNC Services downloadsyour requested destination to the navigation system. The navigationsystem then calculates the route and provides driving instructions. Seethe Navigation system section for more information. Disconnecting from SYNC Services 1. Press ...

“SERVICES” “Route status” “Route summary” “Services” “Update route” “Help” Sirius Travel Link (If Equipped and If Activated) WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may ta...

Note: The SYNC 911 Assist feature must be set on prior to the incident. Note: Before setting this feature on, make sure that you read the 911 Assist privacy notice later in this section for important information. Note: If any user turns 911 Assist on or off, that setting applies for all paired phone...

Vehicle Health Report (If Equipped, United States Only) WARNING: Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. Vehicle Health Report supplements, but cannotreplace, normal maintenance and vehicle inspection. V...

SETTINGS A. Clock B. Display C. Sound D. Vehicle E. Settings F. Help Under this menu, you can set your clock, access and adjust thedisplay, sound and vehicle settings as well as access settings forspecific modes or the help feature. Clock Note: You cannot manually set the date. Your vehicle’s GPS do...

You can also turn the outside air temperature display on and off. Itappears at the top center of the touchscreen, next to the time and date. The system automatically saves any updates you make to the settings. Display You can adjust the touchscreen display through the touchscreen or bypressing the v...

• Each file must be 1.5 MB or less. • Recommended dimensions: 800 x 384. Sound Press the Settings icon > Sound, then select from the following: Sound Settings Bass DSP * Midrange Occupancy Mode * Treble Speed Compensated Volume Set Balance and Fade * If equipped. Vehicle Press the Settings icon &...

Door Keypad Code To change the keypad code for your keyless entry keypad system:1. Press the Settings icon > Vehicle > Door Keypad Code. 2. Enter your current factory code, then, when prompted, enter your new code. Rear View Camera This menu allows you to access settings for your rear view cam...

Navigation Press the Settings icon > Settings > Navigation, then select from the following: Navigation Map Preferences Turn breadcrumbs on and off. Have the system display your turn list top tobottom or bottom to top. Turn the Parking POI notification on and off. Route Preferences Preferred Ro...

Phone Phone Ringer Select the type of notification for phone calls- ring tone, beep, text to speech, or have it besilent. Text MessageNotification Select the type of notification for textmessages - alert tone, beep, text to speech, orhave it be silent. Internet DataConnection If compatible with your...

Wireless & Internet Wi-Fi Settings Wi-Fi Network (Client) Mode turns the Wi-Fi feature on and off in your vehicle. Makesure you turn it on for connectivity purposes. Choose a Wireless Network allows you to use a previously stored wireless network. Youcan categorize by alphabetical listing, prior...

Wireless & Internet USB MobileBroadband Instead of using Wi-Fi, your system can alsouse a USB mobile broadband connection toaccess the internet. (You must turn on yourmobile broadband device on your personalcomputer before connecting it to the system.)This screen allows you to set up what is you...

K. Manual controls: Select any of the following airflow distribution modes: • Floor and Defrost: Distributes air through the windshield defroster vents, demister vents, floor vents and rear seat floor vents, andprovides outside air to reduce window fogging. • Panel: Distributes air through the instr...

NAVIGATION SYSTEM (IF EQUIPPED) Note: The navigation SD card must be in the SD card slot to operate the navigation system. If you need a replacement SD card, see yourauthorized dealer. Note: The SD card slot is spring-loaded. To remove the SD card, just push the card in and release it. Do not attemp...

This screen displays either a facility photo (if available) or point ofinterest icons, such as: Hotel Coffeehouse Food & Drink Nightlife Attraction This icon appears when your selection exists in multiplecategories within the system. When you are viewing more information for hotels, cityseekr al...

For hotels, cityseekr can provide information, such as star rating, pricecategory, review, check-in and check-out times, hotel service icons andwebsite address. Setting Your Navigation Preferences Select settings for the system to take into account when planning yourroute. Press the Settings icon &g...

Navigation Preferences Guidance Prompts allows you to choose to have the system use Voice & Tones or Tone Only on your programmed route. Auto - Fill State/Province allows you have the system automatically fill in the state and province based on the information already entered intothe system. Tur...

Destination symbol indicates the ending point of a planned route. Next maneuver point indicates the location of the next turn on the planned route. No GPS symbol indicates that insufficient GPS satellite signals are available for accurate map positioning. This icon may displayunder normal operation ...

One-shot Destination Street Address When you say either “Navigation destination street address” or“Destination street address”, the system asks you to say the full address.The system displays an example on-screen. You can then speak theaddress naturally, such as “One two three four Main Street, Anyt...

GENERAL INFORMATION SYNC® End User License Agreement (EULA) • You have acquired a device (“DEVICE”) that includes software licensed by FORD MOTOR COMPANY from an affiliate of MicrosoftCorporation (“MS”). Those installed software products of MS origin, aswell as associated media, printed materials, a...

SOFTWARE’s ability to use WMDRM to play or copy protectedcontent. This action does not affect unprotected content. When yourDEVICE downloads licenses for protected content, you agree thatMicrosoft may include a revocation list with the licenses. Contentowners may require you to upgrade the SOFTWARE ...

suppliers. The SOFTWARE is licensed, not sold. You may not copy theprinted materials accompanying the SOFTWARE. All title and intellectualproperty rights in and to the content which may be accessed through useof the SOFTWARE is the property of the respective content owner andmay be protected by appl...

• THERE ARE NO WARRANTIES OTHER THAN THOSE THAT MAY EXPRESSLY BE PROVIDED FOR YOUR NEW VEHICLE. End user notice Microsoft® Windows® Mobile for Automotive Important SafetyInformation This system Ford SYNC™ contains software that is licensed toManufacturer FORD MOTOR COMPANY by an affiliate of Microso...

code, audio library or structure of the Telenav Software without the priorexpress written consent of Telenav; (c) remove from the TelenavSoftware, or alter, any of Telenav’s or its suppliers’ trademarks, tradenames, logos, patent or copyright notices, or other notices or markings;(d) distribute, sub...

TERMS AND CONDITIONS License Limitations on Use: You agree that your license to use this Data is limited to and conditioned on use for solely personal,noncommercial purposes, and not for service bureau, timesharing orother similar purposes. Except as otherwise set forth herein, you agreenot to other...

Disclaimer of Warranty: HERE AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) DISCLAIM ANY WARRANTIES,EXPRESS OR IMPLIED, OF QUALITY, PERFORMANCE,MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE ORNON-INFRINGEMENT. Some States, Territories and Countries do notallow certain warranty exclu...

Gracenote® Copyright CD and music — related data from Gracenote, Inc., copyright 娀 2000–2007 Gracenote. Gracenote Software, copyright 娀 2000–2007 Gracenote. This product and service may practice one or more of thefollowing U.S. Patents #5,987,525; #6,061,680; #6,154,773, #6,161,132,#6,230,192, #6,23...

Vehicle with SYNC only FCC ID: KMHSG1G1 IC: 1422A-SG1G1 Vehicle with SYNC and MyFord Touch or MyLincoln Touch FCC ID: KMHSYNCG2 IC: 1422A-SYNCG2 This device complies with Part 15 of the FCC Rules and with RSS-210 ofIndustry Canada. Operation is subject to the following two conditions:(1) This device...

GENERAL MAINTENANCE INFORMATION Why Maintain Your Vehicle? Carefully following the maintenance schedule helps protect against majorrepair expenses resulting from neglect or inadequate maintenance andmay help to increase the value of your vehicle when you sell or trade it.Keep all receipts for comple...

Note: Not all dealers have extended hours or body shops. Please contact your dealer for details. Protecting Your Investment Maintenance is an investment that will pay dividends in the form ofimproved reliability, durability and resale value. To maintain the properperformance of your vehicle and its ...

chemicals or additives not approved by Ford Motor Company are notrecommended as part of normal maintenance. Please consult yourwarranty information. Oils, Fluids and Flushing In many cases, fluid discoloration is a normal operating characteristicand, by itself, does not necessarily indicate a concer...

Normal scheduled maintenance * At every oil changeinterval as indicated bythe information display Change engine oil and filter. ** Rotate tires, inspect tire wear and measuretread depth. Perform multi-point inspection(recommended). Inspect automatic transmission fluid level(if equipped with dipstick...

Other maintenance items 1 Every 20000 miles(32000 km) Replace cabin air filter (if equipped). Every 30000 miles(48000 km) Replace climate-controlled (heated andcooled) seat filter (if equipped). Replace engine air filter. At 100000 miles(160000 km) Change engine coolant. 2 Every 100000 miles(160000 ...

Maintenance Schedule Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ...

Extensive idling or low-speed driving for long distances as in heavy commercial use (such as delivery, taxi, patrol car or livery) Every 30000 miles(48000 km) Change automatic transmission fluid. Every 60000 miles(96000 km) Replace spark plugs. Operating in dusty or sandy conditions such as unpaved ...

Special Operating Condition Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D A...

EXCEPTIONS There are several exceptions to the Normal Schedule. They are listedbelow: Normal vehicle axle maintenance: Rear axles and power take-off units with synthetic fluid and light-duty trucks equipped withFord-design axles are lubricated for life; do not check or change fluidunless a leak is s...

Engine air filter & cabin air filter replacement: Engine air filter and cabin air filter life is dependent on exposure to dusty and dirtyconditions. Vehicles operated in these conditions require frequentinspection and replacement of the engine air filter and cabin air filter. ENGINE COOLANT CHAN...

911 Assist™ ......................405, 478 A ABS (see Brakes) .....................208 Accessing and using yourUSB port ....................................457 Accessing call history/phonebook during active call .............394 Accessing your calendar ..........478 Accessing your media menufeatures...