Ford 2013 Mustang v.2- Manuals

Symbol Description Symbol Description Symbol Description Powersteering fluid Powerwindowsfront andrear Powerwindowlockout Serviceengine soon Side airbag Stabilitycontrol Windshielddefrost anddemist Windshieldwasher andwiper DATA RECORDING Service Data Recording Service data recorders in your vehicle...

Additionally, when you connect to Traffic, Directions andInformation (if equipped, U.S. only), the service uses GPStechnology and advanced vehicle sensors to collect the vehicle’scurrent location, travel direction, and speed (“vehicle travelinformation”), only to help provide you with the directions...

REPLACEMENT PARTS RECOMMENDATION Your vehicle has been built to the highest standards using quality parts. Werecommend that you demand the use of genuine Ford and Motorcraft partswhenever your vehicle requires scheduled maintenance or repair. You canclearly identify genuine Ford and Motorcraft parts...

WARNING: Please read the Supplementary Restraints System chapter. Failure to follow the specific warnings and instructions could result in personal injury. WARNING: Front seat mounted rear-facing child or infant seats should NEVER be placed in front of an active passenger airbag. MOBILE COMMUNICATIO...

GENERAL INFORMATION See the following sections for directions on how to properly use safetyrestraints for children. WARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be purchased separately from the...

WARNING: Never use pillows, books, or towels to boost a child. They can slide around and increase the likelihood of injury or death in a collision. WARNING: Always restrain an unoccupied child seat or booster seat. These objects may become projectiles in a collision or sudden stop, which may increas...

BOOSTER SEATS WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the riskof injury or death in a collision. Use a belt-positioning booster seat for children who ha...

Types of Booster Seats • Backless booster seats If your backless booster seat has a removable shield, remove the shield.If a vehicle seating position has a low seat back or no head restraint, abackless booster seat may place your child’s head (as measured at thetops of the ears) above the top of the...

If the booster seat slides on the vehicle seat, placing a rubberized meshsold as shelf or carpet liner under the booster seat may improve thiscondition. Do not introduce any item thicker than this under the boosterseat. Check with the booster seat manufacturer’s instructions. INSTALLING CHILD SAFETY...

10. Before placing the child in theseat, forcibly move the seat forwardand back to make sure the seat issecurely held in place. To check this, grab the seat at the belt path and attempt to move it sideto side and forward and back. There should be no more than 1 inch(2.5 cm) of movement for proper in...

Combining Safety Belt and LATCH Lower Anchors for AttachingChild Safety Seats When used in combination, either the safety belt or the LATCH loweranchors may be attached first, provided a proper installation is achieved.Attach the tether strap afterward, if included with the child seat. Using Tether ...

PRINCIPLES OF OPERATION WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. WARNING: To reduce the risk of injury, make sure children sit where they can be properly restrained. WARNING: Never let a passenger hold a child on his or her lap while th...

FASTENING THE SAFETY BELTS The front outboard and rear safety restraints in the vehicle arecombination lap and shoulder belts. The presenter arm (available on the coupe only) is intended to improveaccess to the safety belt and to allow access to the rear seat. Rotate the presenter arm towardthe fron...

How to disengage the automatic locking mode Disconnect the combination lap/shoulder belt and allow it to retractcompletely to disengage the automatic locking mode and activate thevehicle sensitive (emergency) locking mode. Safety Belt Extension Assembly WARNING: Do not use extensions to change the f...

4. Within approximately seven seconds of the light turning off, bucklethen unbuckle the safety belt. • This will disable the Belt-Minder 威 feature for that seating position if it is currently enabled. • This will enable the Belt-Minder 威 feature for that seating position if it is currently disabled....

PERSONAL SAFETY SYSTEM™ The Personal Safety System provides an improved overall level of frontalcrash protection to front seat occupants and is designed to help furtherreduce the risk of airbag-related injuries. The system is able to analyzedifferent occupant conditions and crash severity before act...

The airbags are a supplemental restraint system and are designed towork with the safety belts to help protect the driver and right frontpassenger from certain upper body injuries. Airbags DO NOT inflateslowly; there is a risk of injury from a deploying airbag. Note: You will hear a loud bang and see...

DRIVER AND PASSENGER AIRBAGS WARNING: Never place your arm or any objects over an airbag module. Placing your arm over a deploying airbag can result in serious arm fractures or other injuries. Objects placed on or over theairbag inflation area may cause those objects to be propelled by theairbag int...

WARNING: To reduce the risk of possible serious injury: Do not stow objects in seat back map pocket (if equipped) or hang objects off seat back if a child is in the front passenger seat.Do not place objects underneath the front passenger seat or betweenthe seat and the center console (if equipped).C...

If you think that the status of the passenger airbag off indicator lamp isincorrect, check for the following: • Objects lodged underneath the seat • Objects between the seat cushion and the center console (ifequipped) • Objects hanging off the seat back • Objects stowed in the seatback map pocket (i...

If it is necessary to modify an advanced front airbag system toaccommodate a person with disabilities, contact the Ford CustomerRelationship Center at the phone number shown in the Customer Assistance section of this owner’s manual. SIDE AIRBAGS WARNING: Do not place objects or mount equipment on or...

The system consists of the following: • A label or embossed side panel indicatingthat side airbags are fitted to your vehicle. • Side airbags located inside the seatback ofthe driver and front passenger seats. • Crash sensors and monitoring system with readinessindicator. Refer to Crash sensors and ...

The restraints control module also monitors the readiness of the abovesafety devices plus the crash and occupant sensors. The readiness of thesafety system is indicated by a warning indicator light in the instrumentcluster or by a backup tone if the warning light is not working. Refer to Warning lam...

PRINCIPLE OF OPERATION The remote control allows you to: • remotely lock or unlock the vehicle doors • remotely open the trunk • arm and disarm the anti-theft system (if equipped) • activate the panic alarm GENERAL INFORMATION ON RADIO FREQUENCIES The remote control complies with part 15 of the FCC ...

Integrated Keyhead Transmitter 1. Twist a thin coin in the slot near the keyring to remove the battery cover (1). 2. Carefully peel up the rubber gasket (2)from the transmitter if it does not come offwith battery cover. 3. Remove the old battery (3). 4. Insert the new battery. Refer to the instructi...

PRINCIPLES OF OPERATION MyKey 威 allows you to program keys with restricted driving modes to promote good driving habits. All but one of the keys programmed to thevehicle can be activated with these restricted modes. Any keys that havenot been programmed are referred to as an “administrator key” or“a...

CREATING A MYKEY Use the information display control to create a MyKey.1. Insert the key you want to program into the ignition or, if the vehicle is equipped with push button start, put the intelligent access key inthe backup slot; refer to Starting and Stopping the Engine chapter for backup slot lo...

CHECKING MYKEY SYSTEM STATUS The information display control displays information about keysprogrammed to the vehicle: • MYKEY MILES: Tracks mileage when a MyKey is used. If mileage does not accumulate as expected, then the MyKey is not being usedby the intended user. The only way to reset this to z...

Vehicles Equipped with Intelligent Access Key (Push Button Start) Note: It is not possible to program the remote start system as a MyKey on vehicles equipped with intelligent access key (push button start).Therefore, you should treat the remote start fob as you would any otheradmin key. When the veh...

Condition Potential Causes I accidentallyprogrammed all keysas restricted keys • The vehicle has a remote start system that is recognized as an admin key. Refer to the Using MyKey with remote start systems section to reset all restricted keys usingremote start. No restricted keyfunctions withintelli...

LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lockand unlock the vehicle. Power Door Locks A. Unlock B. Lock Remote Control The remote control can be used any time the vehicle is not running. Unlocking the Doors (Two-Stage Unlock) Press the button to unlock t...

Smart Locks This feature helps prevent you from locking yourself out of the vehicle ifyour key is still in the ignition. When you open the driver’s door and you lock the vehicle with thepower door lock control, all the doors will lock, then the driver’s doorwill automatically unlock reminding you th...

Enabling or Disabling Autolock and Autounlock Note: The autolock and autounlock features can be activated or deactivated independently of each other: • through your authorized dealer, or • by using the information display. Before following the activation or deactivation procedures, make surethat the...

TRUNK RELEASE The remote trunk release button islocated on the center console.Press the button to unlatch thetrunk. Interior Trunk Control Lockout (Convertible Vehicles Only) This feature helps prevent unauthorized access to the trunk when theconvertible top is open, by disabling the interior trunk ...

INTERIOR LUGGAGE COMPARTMENT RELEASE WARNING: Keep vehicle doors and luggage compartment locked and keep keys and remote transmitters out of a child’s reach. Unsupervised children could lock themselves in the trunk and riskinjury. Children should be taught not to play in vehicles. WARNING: Do not le...

Replacement of Integrated Keyhead Transmitters and Coded Keys Note: Your vehicle comes equipped with two integrated keyhead transmitters. The integrated keyhead transmitter functions as both a programmedignition key that operates all the locks and starts the vehicle, as well as aremote keyless entry...

• Trunk • Movement inside the vehicle (for convertible models, top must be fullyclosed) • Change in vehicle inclination (such as unwanted towing) Lock the vehicle using the remote control or the power door lock controlwith the accompanying door open and then close all doors. Note: Do not choose full...

The turn signal lamps will flash once when all doors, the hood and thetrunk are closed indicating the vehicle is locked and entering the20 second countdown. If any closure is not properly closed the turnsignal lamps will not flash and that closure will not be armed. Disarming the System You can disa...

ADJUSTING THE STEERING WHEEL WARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. Refer to Sitting In the Correct Position in the Seats chapter. 1. Unlock the steering column. 2. Adjust the steering wheel to thedesired p...

CRUISE CONTROL Refer to the Cruise Control chapter. INFORMATION DISPLAY CONTROL Type 1 Type 2 Refer to the Information Displays chapter. - + SET CNCL RSM ON OFF OK Steering Wheel 73 2013 05+ Mustang (197) Owners Guide gf, 2nd PrintingUSA (fus)

WINDSHIELD WIPERS Note: Fully defrost the windshield in icy conditions before turning on the windshield wipers. Rotate the end of the control awayfrom you to increase the speed ofthe wipers. Rotate toward you todecrease the speed of the wipers. WINDSHIELD WASHERS Note: Do not operate the wipers on a...

LIGHTING CONTROL A. Off B. Parking lamps, instrument panellamps, license plate lamps and taillamps C. Headlamps High Beams • Push the lever toward theinstrument panel to activate. • Pull the lever toward you todeactivate. Headlamp Flasher Pull toward you slightly to activateand release to deactivate...

AUTOLAMPS (If equipped) WARNING: In severe weather conditions, it may be necessary to switch your headlamps on manually. Note: If the vehicle is equipped with autolamps, it will have the windshield wiper rainlamp feature. When the windshield wipers are turned to low- or high-speed wiping during dayl...

HEADLAMP EXIT DELAY You can set the delay time to keep the headlamps on for up to threeminutes after the ignition is turned off. Follow the steps below to change the delay time (Steps 1 through 6must be done within 10 seconds): 1. Turn the ignition off. 2. Turn the lighting control to the autolamp p...

To switch the system on: 1. Switch the ignition on. 2. Switch the lighting control to the off, autolamp or parking lampposition. 3. Make sure the transmission selector lever is not in position P. 4. Make sure the parking brake is disengaged. FRONT FOG LAMPS The fog lamps can be turned onwhen the lig...

INTERIOR LAMPS Dome/Map lamps The dome lamp lights when:. • any door is opened. • any of the remote entry controlsare pressed and the ignition isoff. • the instrument panel dimmerswitch is rotated up, past thedetent, until the courtesy lampscome on. The map lamps are activated by pressing the contro...

POWER WINDOWS WARNING: Do not leave children unattended in the vehicle and do not let children play with the power windows. They may seriously injure themselves. WARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in t...

The following procedure must be performed within two minutes: 1. Turn the ignition off, then turn back on. 2. Press the rear window switch down three times. 3. Turn the ignition off, then turn back on. 4. Pull and hold the rear window switch up and hold for three seconds.The rear windows will begin ...

Heated Exterior Mirror (If Equipped) Note: Do not remove ice from the mirrors with a scraper or attempt to readjust the mirror glass if it is frozen in place. These actions couldcause damage to the glass and mirrors. Note: Do not clean the housing or glass of any mirror with harsh abrasives, fuel or...

The approaching vehicle’s image issmall and near the inboard edge ofthe main mirror when it is at adistance. The image becomes largerand begins to move outboard acrossthe main mirror as the vehicleapproaches (A). Its image willtransition from the main mirror andbegin to appear in the blind spotmirro...

SUN VISORS Slide-On-Rod Rotate the visor toward the sidewindow and extend it rearward forextra sunlight coverage. Retract the visor before moving itback toward the windshield andstoring it. Illuminated Visor Vanity Mirror Lift the cover to switch on the lamp. Windows and Mirrors 85 2013 05+ Mustang ...

Flexible Visor Storage System The system can accommodate various storage accessories. A sunglassesclip and multi-function clip are provided. To attach one of the accessories, dothe following: 1. Insert the provided removal tool(on the accessory holder) or a coininto the slot on the plug and rotateon...

GAUGES Type 1 Cluster shown in standard measure. Metric similar. A. Speedometer B. Fuel gauge C. Engine coolant temperature gauge D. Tachometer E. Information display. See Information displays for more information. Note: The instrument cluster gauges are backlit with white backlighting when the head...

Fuel gauge Indicates approximately how much fuel is left in the fuel tank (when theignition is on). The fuel gauge may vary slightly when the vehicle is inmotion or on a grade. The fuel icon and arrow indicates which side ofthe vehicle the fuel filler door is located. Engine coolant temperature gaug...

Anti-lock brake system If the ABS light stays illuminated or continues to flash, amalfunction has been detected. Contact your authorized dealeras soon as possible. Normal braking is still functional unless the brake warning light also is illuminated. Anti-theft system Flashes when the SecuriLock 威 p...

Safety belt Reminds you to fasten your safety belt. A Belt-Minder 威 chime will also sound to remind you to fasten your safety belt. Service engine soon The service engine soon indicator light illuminates when the ignition is first turned to the on position to check the bulb andto indicate whether th...

GENERAL INFORMATION WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsibility is the safeoperation of the ...

MYKEY MILES (km) For more information, refer to the MyKey 威 chapter. MILES (km) TO E This displays an estimate of approximately how far you can drive withthe fuel remaining in your tank under normal driving conditions.Remember to turn the ignition off when refueling to allow this feature tocorrectly...

2. Press RESET to scroll through the following color options: • ICE BLUE • BLUE • WHITE • ORANGE • GREEN • RED • PURPLE • MYCOLOR 1, 2, 3 (See HOLD RESET TO SET MY COLOR 1, 2,3 following, to save personalized color combinations) HOLD RESET TO SET MYCOLOR 1, 2, 3 (Saving your own colors) Apart from t...

AUTOUNLOCK This feature automatically unlocks all vehicle doors when the driver’sdoor is opened within 10 minutes of the ignition being turned off. Press RESET to turn autounlock on or off. REAR PARK AID This feature sounds a warning tone to warn the driver of obstacles nearthe rear bumper, and func...

Main menu You can access the menus using the information display control. • Gauge Mode • Trip A/B • Fuel Economy • Track Apps (Track use only) • Settings • Information †Gauge Mode Gauges Detail Air/Fuel Ratio Virtual gauge shown Vacuum inHG /Boost psi(Shelby 威 GT500 威 ) Virtual gauge shown Cyl Head ...

†Trip A/ B Trip time Trip distance Fuel used Avg mpg(L/100km) Odometer (displays in lower line and may display in other menus) †See Trip computer later in this section for more information. Fuel Economy Fuel Econ. Instant MPG (L/100km) mi (km) to E AVG MPG (L/100km) Fuel Hist.: showsfuel usage as ab...

Settings Driver Assist Rear Park Aid On/Off Vehicle Autolamp Delay Off or XXX seconds Locks Autolock On/Off Autounlock On/Off Menu Control Standard: with standard set,pressing the up/down arrows froma lower level menu will escape tothe main menu.Memory On: with memory on set,pressing the up/down arr...

Settings Vehicle Dampers(Shelby 威 GT500 威 ) Sport / Normal Steering Feel Standard Sport Sport Locked:This will displaywhenAdvanceTrac 威 sport mode ison or whenAdvanceTrac 威 and tractioncontrol are off.The steeringfeel will belocked in sportmode andsteering feelwill not beselectable. Comfort Informat...

Settings *Language English, Español, Français Units English or Metric System Reset Hold OK to Reset System to Factory Default †The instrument cluster gauges are backlit white when the headlampsare off. When the headlamps are on, you can select one of the presetcolors or MyColor 1, 2, 3 for the night...

Fuel used Shows the amount of fuel used for a given trip. Average MPG (L/100km) Shows the average distance traveled per unit of fuel used for a giventrip. Odometer Registers the total mileage of the vehicle. VIRTUAL GAUGES Note: In order to provide real-time values, some gauges may display more valu...

Brake Performance Displays the vehicle’s rate of deceleration. 1. Choose desired speed to start recording data. 2. Follow the on-screen prompts. Dashboard Screen (Shelby 姞 GT500 姞 ) For dashboard screen information, see the Shelby GT500 Supplement . Launch Control (Shelby 姞 GT500 姞 ) For launch cont...

Fuel Messages Action / Description CHECK FUEL FILLINLET Displayed when the fuel fill inlet may not beproperly closed. FUEL LEVEL LOW Displayed as an early reminder of a low fuelcondition. Key Messages Action / Description COULD NOTPROGRAMINTEGRATED KEY Displayed when an attempt is made toprogram a f...

Tire Messages Action / Description LOW TIREPRESSURE Displays when one or more tires on yourvehicle have low tire pressure. TIRE PRESSUREMONITOR FAULT Displays when the tire pressure monitoringsystem is malfunctioning. If the warning stayson or continues to come on, contact yourauthorized dealer. TIR...

Compass Zone Adjustment When something affects the compass readings, typically the compasscorrects itself after a few days of operating your vehicle in normalconditions. If the compass still appears to be inaccurate, a manualcalibration may be necessary. 1. Determine which magnetic zone you are in f...

GENERAL AUDIO INFORMATION Radio Frequencies and Reception Factors AM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Canadian Radio and TelecommunicationsCommission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.9–107.7, 107.9 MHz Radio rec...

Always handle discs by their edges only. Clean the disc with an approvedCD cleaner only, wiping from the center of the disc toward the edge. Donot clean in a circular motion. Do not expose discs to direct sunlight or heat sources for extendedperiods of time. MP3 Track and Folder Structure Audio syst...

• In SIRIUS mode, enter the desired channel (i.e. 002) using thememory preset buttons. If you only enter one digit, press OK and thesystem goes to that channel. If you enter three digits, the systemautomatically goes to that channel, if available. You may cancel yourentry by pressing DIRECT. If an i...

USB PORT WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that you use extreme caution when using any device or feature that may takeyour focus off the road. Your primary responsibility is the safe operationof the vehicle. We reco...

MANUAL HEATING AND AIR CONDITIONING SYSTEM A. Defrost: Distributes air through the windshield defroster vents and de-mister vents. This setting can also be used to defog and clear thewindshield of a thin covering of ice. B. Rear defrost: Turns the heated rear window on and off. Refer to Heated rear ...

DUAL ZONE AUTOMATIC TEMPERATURE CONTROL SYSTEM(WITH NAVIGATION SYSTEM) Note: To use the touchscreen controls, refer to the Touchscreen climate controls in the Navigation System chapter. A. CLIMATE: Control the system through the touchscreen display. See Touchscreen functions later in this section. B...

F. Recirculated air: Press the button to switch between outside air and recirculated air. When the LED on the button is lit, the air currently inthe passenger compartment is being recirculated. Using recirculated aircan reduce the time needed to cool the interior and reduce unwantedodors from enteri...

• Remove any snow, ice or leaves from the air intake area at the base ofthe windshield. • To improve the A/C cool down, drive with the windows slightly openfor 2-3 minutes after start up or until the vehicle has been aired out. • A small amount of air may be felt from the floor vent regardless of th...

• To improve the A/C cool down, drive with the windows slightly openfor 2-3 minutes after start up or until the vehicle has been aired out. • A small amount of air may be felt from the floor vent regardless of theair distribution setting that is selected. During extreme high ambient temperatures whe...

CABIN AIR FILTER Note: A cabin air filter must be installed at all times to prevent foreign objects from entering the system. Running the system without a filter inplace could result in degradation or damage to the system. Your vehicle is equipped with a cabin air filter, which is located just infro...

SITTING IN THE CORRECT POSITION WARNING: Sitting improperly out of position or with the seatback reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system,resulting in serious injury or death in a crash. Always sit upright againstyour seatback...

HEAD RESTRAINTS WARNING: To minimize the risk of neck injury in the event of a crash, the driver and passenger occupants should not sit in and/or operate the vehicle, until the head restraint is placed in itsproper position. The driver should never adjust the head restraint whilethe vehicle is in mo...

• Remove: Pull up the head restraint until it reaches the highest adjustment position and then press and hold both the adjust/releasebutton (C) and the unlock/remove button (D), then pull up on thehead restraint. • Reinstall: Align the steel stems into the guide sleeves and push the head restraint d...

Tilting Head Restraints (If Equipped) The front head restraints may have a tilting feature for extra comfort. Totilt the head restraint, do the following: 1. Adjust the seatback to an upright driving/ridingposition. 2. Tilt the head restraint forward by gently pullingthe top of the head restraint. O...

Recline adjustment WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. Adjusting the height of thedriver’s seat POWER SEATS (IF EQUIPPED) WARNING: Never adjust the driver’s seat or seatback when the vehicle is moving. WARNING: Before returning the...

To operate the heated seats: • Press control to activate. • Press again to deactivate. REAR SEATS Rear seat entry/exit Use the seatback release to fold theback of the front seat forward forrear seat access. This release handleis located on the upper back of thefront seat. The seatback locksautomatic...

CAR2U 姞 HOME AUTOMATION SYSTEM (IF EQUIPPED) WARNING: Make sure that the garage door and security device are free from obstruction when you are programming. Do not program the system with the vehicle in the garage. WARNING: Do not use the system with any garage door opener that does not have the saf...

Rolling code programming Note: If you do not follow the time-sensitive instructions, the device will time out and you will have to repeat the complete procedure. Note: It may be helpful to have another person assist you in programming the transmitter. 1. Switch the ignition on. 2. Press and hold the...

Fixed code programming Note: It may be helpful to have another person assist you in programming the transmitter. To program units with fixed codeDIP switches, you will need thegarage door hand-held transmitter,paper and a pen or pencil. 1. Switch the ignition on. 2. Open the battery cover and note a...

The LED lamp above the selected button will illuminate to confirm thatthe system is responding to the button command. Erasing the function button codes Note: You cannot erase individual buttons. 1. Press and hold the outer twofunction buttons simultaneously forapproximately 20 seconds until theLED l...

AUXILIARY POWER POINTS WARNING: Do not plug optional electrical accessories into the cigarette lighter socket (if equipped). Improper use of the lighter can cause damage not covered by your warranty, and can result in fireor serious injury. Note: Do not insert objects other than an accessory plug in...

CENTER CONSOLE WARNING: Use only soft cups in the cupholder. Hard objects can injure you in a collision. Your vehicle may be equipped witha variety of console features. • Cupholders in the front of the console (pull the door open to access).Remove the spacer from the cupholder to hold deeper cups. •...

A. Off: The ignition is off. B. Accessory: Allows the electrical accessories such as the radio to operate while the engine is not running. C. On: All electrical circuits operational. Warning lights illuminated. Key position when driving. D. Start: Cranks the engine. The engine may continue cranking ...

We recommend that you do the following for safe and correct operation: • Use a 16-gauge outdoor extension cord that is product certified byUnderwriter’s Laboratory or Canadian Standards Association. Thisextension cord must be able to be used outdoors, in coldtemperatures, and be clearly marked Suita...

SAFETY PRECAUTIONS WARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler door (Easy Fuel 威 “no cap” fuel system), do not refuel unt...

• Avoid getting fuel liquid in your eyes. If fuel is splashed in the eyes,remove contact lenses (if worn), flush with water for 15 minutes andseek medical attention. Failure to seek proper medical attention couldlead to permanent injury. • Fuels can also be harmful if absorbed through the skin. If f...

octane levels below 87 are not recommended. Premium fuel will provideimproved performance and is recommended for severe duty usage suchas trailer tow. • For Shelby GT500 octane requirements, see the Shelby GT500Supplement • For Boss 威 302 octane requirements. see the Boss 威 302 Supplement Do not be ...

Note: Do not use aftermarket funnels; they will not work with the capless fuel system and can damage it. The included funnel has beenspecially designed to work safely with your vehicle. When filling the vehicle’s fuel tank from a portable fuel container, use thefunnel included with the vehicle. 1. L...

Easy Fuel 姞 “No cap” Fuel System WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler door, do not refuel until the sound stops. Otherwise, fuel may spray out, which could cause seriouspersonal injury. When fueling your vehicle: 1. Turn the engine off. 2. ...

EMISSION CONTROL SYSTEM WARNING: Do not park, idle, or drive your vehicle in dry grass or other dry ground cover. The emission system heats up the engine compartment and exhaust system, which can start a fire. WARNING: Exhaust leaks may result in entry of harmful and potentially lethal fumes into th...

AUTOMATIC TRANSMISSION (IF EQUIPPED) WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn the ignition to the off and remove the key whenever you leave your vehicle. Your vehicle has been designed to improve fuel economy by reducingfuel usage while coa...

S (Sport) Moving the gearshift lever to S (Sport): • Provides additional grade (engine) braking and extends lower gearoperation to enhance performance for uphill climbs, hilly terrain ormountainous areas. This will increase engine RPM during engine braking. • Provides additional lower gear operation...

Brake-Shift Interlock WARNING: Do not drive your vehicle until you verify that the brake lamps are working. WARNING: When doing this procedure, you will be taking the vehicle out of park which means the vehicle can roll freely. To avoid unwanted vehicle movement, always fully set the parking brakepr...

Note: Failure to fully press the clutch pedal to the floor may cause increased shift efforts, prematurely wear transmission components ordamage the transmission. Note: Do not drive with your foot resting on the clutch pedal or use the clutch pedal to hold your vehicle at a standstill while waiting o...

This feature makes it easier to pull away when the vehicle is on a slopewithout the need to use the parking brake. When this feature is active,the vehicle will remain stationary on the slope for two to three secondsafter you release the brake pedal. This allows you time to move your footfrom the bra...

GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may beworn-out and should be inspected by an authorized dealer. If the vehiclehas continuous vibration or shudder in the steering wheel while ...

PRINCIPLES OF OPERATION The traction control system helps avoid drive wheel spin and loss oftraction. If your vehicle begins to slide, the system applies the brakes to individualwheels and, when needed, reduces engine power at the same time. If thewheels spin when accelerating on slippery or loose s...

PRINCIPLES OF OPERATION WARNING: Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction and/or wheel/tire size may change the handlingcharacteristics of the vehicle and may adversely affect the performanceof the AdvanceTrac 威 system. In...

A Vehicle without AdvanceTrac 威 skidding off its intended route. B Vehicle with AdvanceTrac 威 maintaining control on a slipperysurface. USING ADVANCETRAC 姞 The system automatically is enabled when you start your engine. TheESC portion of the system is disabled when the transmission is in R(Reverse) ...

SENSING SYSTEM (IF EQUIPPED) WARNING: To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed)objects when moving in reverse on a flat surface at parking speeds.Traffic control sy...

Using the Rear Sensing System The rear sensors are only active when the transmission is in R (Reverse).As the vehicle moves closer to the obstacle, the rate of the audiblewarning increases. When the obstacle is fewer than 12 inches (30centimeters) away, the warning sounds continuously. If a stationa...

WARNING: Back up as slow as possible since higher speeds might limit your reaction time to stop the vehicle. WARNING: Use caution when using the rear video camera and the trunk is ajar. If the trunk is ajar, the camera will be out of position and the video image may be incorrect. All guidelines (ife...

Note: The camera may not operate correctly under the following conditions: • Nighttime or dark areas if one or both reverse lamps are not operating. • The camera’s view is obstructed by mud, water or debris. Clean the lenswith a soft, lint-free cloth and non-abrasive cleaner. • The rear of the vehic...

PRINCIPLES OF OPERATION Cruise control lets you maintain a set speed without keeping your footon the accelerator pedal. USING CRUISE CONTROL WARNING: Do not use cruise control in heavy traffic or on roads that are winding, slippery or unpaved. Note: Vehicle speed may vary momentarily when driving up...

Changing the Set Speed • Press and hold SET + or SET –. Release the control when you reachthe desired speed. • Press and release SET + or SET –. The set speed will change inapproximately 1 mph (2 km/h) increments. • Press the accelerator or brake pedal until you reach the desiredspeed. Press and rel...

STEERING Electric Power Steering WARNING: The electric power steering system has diagnostic checks that continuously monitor the system to ensure proper operation. When a system error is detected a steering message willappear in the information display. WARNING: The electric power steering system ha...

Steering Tips If the steering wanders or pulls, check for: • an improperly inflated tire • uneven tire wear • loose or worn suspension components • loose or worn steering components • improper vehicle alignment A high crown in the road or high crosswinds may also make the steeringseem to wander/pull...

LOAD LIMIT Vehicle Loading – With and Without a Trailer This section will guide you in the proper loading of your vehicle and/ortrailer, to keep your loaded vehicle weight within its design ratingcapability, with or without a trailer. Properly loading your vehicle willprovide maximum return of vehic...

Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue loadweight is also part of cargo weight. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all pa...

GVWR (Gross Vehicle Weight Rating) – is the maximum allowable weight of the fully loaded vehicle (including all options, equipment,passengers and cargo). The GVWR is shown on the Safety Compliance Certification Label. The label shall be affixed toeither the door hinge pillar, door-latch post, or the...

WARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structuraldamage, serious damage to the vehicle, loss of control and personalinjury. GCW (Gross Combined Weight) – is the...

WARNING: Exceeding any vehicle weight rating limitation could result in serious damage to the vehicle and/or personal injury. Steps for determining the correct load limit: 1. Locate the statement “The combined weight of occupants and cargoshould never exceed XXX kg or XXX lbs.” on your vehicle’s pla...

TOWING A TRAILER WARNING: Do not exceed the GVWR or the GAWR specified on the certification label. WARNING: Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of the vehicle and could result in engine damage, transmission damage, structural damage, lossof vehicle c...

Note: For high altitude operation, reduce the gross combined weight by 2% per 1000 feet (300 meters) starting at the 1000 foot (300 meter)elevation point. Note: Certain states require electric trailer brakes for trailers over a specified weight. Be sure to check state regulations for this specifiedw...

Safety Chains Note: Never attach safety chains to the bumper. Always connect the safety chains to the hook retainers of the vehicle hitch. To connect the safety chains, cross them under the trailer tongue andallow enough slack for turning tight corners. Do not allow the chains todrag on the ground. ...

WRECKER TOWING If you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, yourroadside assistance service provider. It is recommended that your vehicle be towed with a wheel lift anddollies or flatbed equipment. Do not tow w...

TOWING THE VEHICLE ON FOUR WHEELS Emergency Towing In the event your vehicle becomes disabled (without access to wheeldollies, car-hauling trailer, or flatbed transport vehicle), it can beflat-towed (all wheels on the ground, regardless of thepowertrain/transmission configuration) under the followin...

OPENING THE CONVERTIBLE TOP (IF EQUIPPED) Note: Do not store articles behind rear seat. Articles stored in the convertible top stowage compartment may break the rear glass windowwhen the top is opened. Note: Opening the convertible top when the top material is wet may cause mold or mildew. The conve...

3. Unclamp the top from the windshield header by pulling each latchhandle down and then rotating the latch to the rear until it clears theheader. Note: If the top has not been opened for some time and sticks to the windshield header, push the front of the top up slightly with your handto loosen it. ...

1. Install the boot on the vehicle by hooking the boot retaining clips onthe back panel. 2. Install the boot on the right side tucking in the front part of the bootin the quarter panel and hooking the retaining clip on the side. 3. Install the boot on the left side tucking in the front part of the b...

Storing the Boot 1. Position the boot right-side upand fold each side of the bootinward. 2. Turn the boot upside down andfold the left side of the boot inward. 3. Fold the right side inward andsecure the boot with the strap. Stow the boot in the trunk. Convertible Top 199 2013 05+ Mustang (197) Owne...

CLOSING THE CONVERTIBLE TOP Note: The convertible top will not operate unless the vehicle is stationary or traveling under 3 mph (5 kmh). Note: Make sure that the latch handles are pulled down and in the fully opened position before the top makes contact with the windshieldheader. This allows for ha...

BREAKING-IN You need to break in new tires for approximately 300 miles(480 kilometers). During this time, your vehicle may exhibit some uniquedriving characteristics. Avoid driving too fast during the first 1000 miles(1600 kilometers). Vary your speed frequently and change up throughthe gears early....

• Carry unnecessary weight (approximately 1 mpg [0.4 km/L] is lost forevery 400 lb [180 kg] of weight carried). • Add particular accessories to your vehicle (e.g. bug deflectors,rollbars/light bars, running boards, ski racks). • Drive with the wheels out of alignment. DRIVING THROUGH WATER WARNING: ...

FLOOR MATS WARNING: Always use floor mats that are designed to fit the foot well of your vehicle. Only use floor mats that leave the pedal area unobstructed. Only use floor mats that are firmly secured toretention posts so that they cannot slip out of position and interferewith the pedals or impair ...

WARNING (Continued) • Failure to properly follow floor mat installation or attachmentinstructions can potentially cause interference with pedal operationcausing loss of control of vehicle. • To install floor mats, position the floor mat so that the eyelet is overthe retention post and press down to ...

ROADSIDE ASSISTANCE Vehicles sold in the U.S. : Getting roadside assistance To fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program. Thisprogram is separate from the New Vehicle Limited Warranty. The serviceis available: • 24-hours,...

U.S. Ford vehicle customers who require Roadside Assistance, call1-800-241-3673. If you need to arrange roadside assistance for yourself, Ford MotorCompany will reimburse a reasonable amount for towing to the nearestdealership within 35 miles (56 km). To obtain reimbursementinformation, U.S. Ford ve...

Connecting the Jumper Cables WARNING: Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery. Note: Do not attach the negative (-) cable to fuel lines, engine rocker covers, the intake...

Removing the Jumper Cables Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. Remove the jumper cables in the reverse order that they wereconnected. 1. Remove the jumper cable fromthe ground metal surface. 2. Remove the jumper cable on thenega...

GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorizeddealer. While any authorized dealer handling your vehicle line willprovide warranty service, we recommend you return to your sellingauthorized dealer who wants to ensure your continued satisfaction. Plea...

• Ford Genuine Accessories • Service specials and promotions. In Canada: Mailing address Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E4 Telephone 1-800-565-3673 (FORD) Online www.ford.ca Additional assistance If you have questions or concerns,...

UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY) For vehicles delivered to authorized Canadian dealers. In those caseswhere you continue to feel that the efforts by Ford of Canada and theauthorized dealer to resolve a factory-related vehicle service concernhave been unsatisfactory, Ford of C...

CHANGING A FUSE Fuses If electrical components in the vehicleare not working, a fuse may haveblown. Blown fuses are identified by abroken wire within the fuse. Checkthe appropriate fuses before replacingany electrical components. Note: Always replace a fuse with one that has the specified amperage r...

FUSE SPECIFICATION CHART Power Distribution Box WARNING: Always disconnect the battery before servicing high current fuses. WARNING: To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs. The power dis...

Passenger Compartment Fuse Panel The fuse panel is located in the lower passenger side area behind thekick panel. Open the trim panel door and remove the fuse cover toaccess the fuses. Use the fuse puller tool provided, located inside the fuse cover, toremove a fuse. The fuses are coded as follows: ...

GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthinessand resale value. There is a large network of Ford authorized dealersthat are there to help you with their professional servicing expertise. Webelieve that their specially trained technicians are best qualifi...

OPENING AND CLOSING THE HOOD 1. Inside the vehicle, pull the hood releasehandle located on the driver’s side kick panel. 2. Go to the front of the vehicle andrelease the auxiliary latch that islocated under the front center ofthe hood. 3. Lift the hood and secure it with the prop rod. 226 Maintenanc...

UNDER HOOD OVERVIEW 3.7L V6 engine A. Battery B. Engine oil dipstick C. Engine oil filler cap D. Brake fluid reservoir E. Air filter assembly F. Engine coolant reservoir G. Windshield washer fluid reservoir H. Power distribution box A G F E H D C B Maintenance 227 2013 05+ Mustang (197) Owners Guide...

Engine shield Some vehicles may be equipped with an aero-shield under the engine.Remove the front fasteners of the shield to gain access for service. Thisincludes oil and filter changes. ENGINE OIL DIPSTICK A. – MIN B. – MAX ENGINE OIL CHECK Note: Check the level before starting the engine. Note: Ma...

Adding engine oil Note: Do not remove the filler cap when the engine is running. Note: Do not add engine oil further than the MAX mark. Oil levels above the MAX mark may cause engine damage. Only use oils certified for gasoline engines by theAmerican Petroleum Institute (API). An oil with thistradem...

Adding engine coolant WARNING: Do not add engine coolant when the engine is hot. Steam and scalding liquids released from a hot cooling system can burn you badly. Also, you can be burned if you spill coolant on hotengine parts. WARNING: Do not put engine coolant in the windshield washer fluid contai...

• Do not add extra inhibitors or additives to the coolant. These can beharmful and compromise the corrosion protection of the enginecoolant. Unscrew the cap slowly. Any pressure will escape as you unscrew thecap. Add prediluted engine coolant meeting the Ford specification. See thetechnical specific...

What you should know about fail-safe cooling If the engine coolant supply is depleted, this feature allows the vehicle tobe driven temporarily before incremental component damage is incurred.The “fail-safe” distance depends on ambient temperatures, vehicle loadand terrain. How fail-safe cooling work...

Checking and adding manual transmission fluid (if equipped) 1. Clean the filler plug. It is locatedon the passenger side of thetransmission. 2. Remove the filler plug and inspectthe fluid level. 3. For vehicles equipped with a V6 engine, the correct manual transmission fill level is at the lower edg...

WASHER FLUID CHECK WARNING: If you operate your vehicle in temperatures below 40°F (5°C), use washer fluid with antifreeze protection. Failure to use washer fluid with antifreeze protection in cold weather couldresult in impaired windshield vision and increase the risk of injury oraccident. Add flui...

Your vehicle is equipped with a Motorcraft 威 maintenance-free battery which normally does not require additional water during its life ofservice. Note: If your battery has a cover/shield, make sure it is reinstalled after the battery has been cleaned or replaced. For longer, trouble-free operation, ...

AIR FILTER CHECK WARNING: To reduce the risk of vehicle damage and/or personal burn injuries do not start your engine with the air cleaner removed and do not remove it while the engine is running. When changing the air filter element, use only the air filter elementlisted. Refer to Motorcraft 威 part...

4. Locate the vertical adjuster oneach headlamp. 5. Then use a 7 millimeter Allen wrench or a Phillips screwdriver toadjust the vertical aim of the headlamp. HORIZONTAL AIM IS NOTREQUIRED FOR THIS VEHICLE AND IS NON-ADJUSTABLE. 6. Close the hood and turn off the lamps. CHANGING A BULB Lamp Assembly ...

Replacing HID headlamp bulbs The headlamps on your vehicle use a “high intensity discharge” source.These lamps operate at a high voltage. When the bulb is burned out, thebulb and starter capsule assembly must be replaced by your authorizeddealer. Replacing front parking lamp/turn signal bulbs 1. Mak...

5. Carefully pull the bulb straightout of socket. Replacing fog lamp bulbs (V6) (if equipped) 1. Make sure the headlamp control is in the off position and open the hood. 2. Remove the hex head screwsattaching the underbody forwardaeroshield. 3. Remove the underbody forwardaeroshield to gain access t...

Convertible top and padded molding For vinyl tops, wash with Motorcraft 威 Detail Wash. For cloth tops wash with a high quality convertible topcleaner/protectant. • Do not use stiff bristle brushes or abrasive materials or cleaners. • Hot waxes applied by commercial car washes can affect thecleanabil...

• Spray Motorcraft 威 Engine Shampoo and Degreaser on all parts that require cleaning and pressure rinse clean. In Canada, use Motorcraft 威 Engine Shampoo. • Never wash or rinse the engine while it is hot or running; water in therunning engine may cause internal damage. • Never wash or rinse any igni...

CLEANING THE INTERIOR WARNING: Do not use cleaning solvents, bleach or dye on the vehicle’s safety belts, as these actions may weaken the belt webbing. WARNING: On vehicles equipped with seat-mounted airbags, do not use chemical solvents or strong detergents. Such products could contaminate the side...

CLEANING THE ALLOY WHEELS Note: Do not use chrome cleaner, metal cleaner or polish on wheels and wheel covers. Aluminum wheels and wheel covers are coated with a clear coat paintfinish. In order to maintain their shine: • Clean weekly with Motorcraft 威 Wheel and Tire Cleaner. Heavy dirt and brake du...

Brakes • Make sure brakes and parking brake are fully released. Tires • Maintain recommended air pressure. Miscellaneous • Make sure all linkages, cables, levers and pins under vehicle arecovered with grease to prevent rust. • Move vehicles at least 25 feet (8 meters) every 15 days to lubricateworki...

TIRE CARE Information About Uniform Tire Quality Grading Tire Quality Grades apply to newpneumatic passenger car tires. TheQuality grades can be found whereapplicable on the tire sidewall betweentread shoulder and maximum sectionwidth. For example: • Treadwear 200 Traction AA Temperature A These Tir...

INFORMATION CONTAINED ON THE TIRE SIDEWALL Both U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the sidewall of all tires. Thisinformation identifies and describes the fundamental characteristics ofthe tire and also provides a U.S. DOT Tire Identifi...

E. 15: Indicates the wheel or rim diameter in inches. If you change your wheel size, you will have to purchase new tires to match the new wheeldiameter. F. 95: Indicates the tire’s load index. It is an index that relates to how much weight a tire can carry. You may find this information in yourowner...

Information on “T” Type Tires “T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below: T145/80D16 is an example of a tiresize. Note: The temporary tire size for your vehicle may be different fromthis example. Tire Quality Gradesdo not apply ...

INFLATING YOUR TIRES Safe operation of your vehicle requires that your tires are properlyinflated. Remember that a tire can lose up to half of its air pressurewithout appearing flat. Every day before you drive, check your tires. If one looks lower than theothers, use a tire gauge to check pressure o...

Damage Periodically inspect the tire treads and sidewalls for damage (such asbulges in the tread or sidewalls, cracks in the tread groove andseparation in the tread or sidewall). If damage is observed or suspectedhave the tire inspected by a tire professional. Tires can be damagedduring off-road use...

Tire Replacement Requirements WARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus LT-metric or all-season versus all-terrain) as those originallyprovided by Ford. The recommended tire and wheel size may be found oneither t...

Important: Remember to replace the wheel valve stems when the road tires are replaced on your vehicle. It is recommended that the two front tires or two rear tires generally bereplaced as a pair. The tire pressure sensors mounted in the wheels (originally installed onyour vehicle) are not designed t...

Tire and Wheel Alignment A bad jolt from hitting a curb or pothole can cause the front end of yourvehicle to become misaligned or cause damage to your tires. If your vehicleseems to pull to one side when you’re driving, the wheels may be out ofalignment. Have an authorized dealer check the wheel ali...

SUMMER TIRES (IF EQUIPPED) Summer tires provide superior performance on wet and dry roads.Summer tires do not have the Mud and Snow (M+S or M/S) tire tractionrating on the tire side wall. Since summer tires do not have the sametraction performance as All-season or Snow tires, Ford does notrecommend ...

• Do not use tire chains with any other size tires. Use of SAE Class Schains or other chain types on tires other than a P225/60R17 willdamage the vehicle • Install chains securely, verifying that the chains do not touch anywiring, brake lines or fuel lines. • Drive cautiously. If you hear the chains...

Changing Tires with a TPMS Note: Each road tire is equipped with a tire pressure sensor locatedinside the tire and wheel assemblycavity. The pressure sensor isattached to the valve stem. Thepressure sensor is covered by thetire and is not visible unless the tireis removed. Care must be takenwhen cha...

When You Believe Your System Is Not Operating Properly The main function of the tire pressure monitoring system is to warn youwhen your tires need air. It can also warn you in the event the system isno longer capable of functioning as intended. Please refer to thefollowing chart for information conc...

Low tirepressurewarning light Possible cause Customer action required Flashingwarning light Spare tire in use Repair the damaged road wheel/tire and reinstall it on the vehicle torestore system functionality. For adescription on how the systemfunctions, refer to When your temporary spare tire is ins...

CHANGING A ROAD WHEEL WARNING: The use of tire sealants may damage your tire pressure monitoring system (TPMS) and should not be used. However, if you must use a sealant, the TPMS sensor and valve stem onthe wheel must be replaced by an authorized Ford dealer. WARNING: Refer to Tire pressure monitor...

• Ground clearance and parking at curbs • Winter weather driving capability • Wet weather driving capability • All-wheel driving capability (if applicable) • Load leveling adjustment (if applicable) When driving with the full-size dissimilar spare tire and wheel assembly,additional caution should be...

6. The vehicle jacking points areshown here, and can be identifiedby the triangle markings on thevehicle. Details are depicted on theyellow warning label on the jack. Jack at the specified locations to avoid damage to the vehicle. 7. Put the jack in the jack notchnext to the tire you are changing.Tu...

TEMPORARY MOBILITY KIT (IF EQUIPPED) Note: The temporary mobility kit sealant compound in the canister is to be used for one tire only. See your Ford authorized dealer for additionalreplacement sealant canisters. The temporary mobility kit is located in the spare tire well in the trunk.The temporary...

Loss of air pressure may adversely affect tire performance. For this reason: • Note: Do not drive the vehicle above 50 mph (80 km/h). • Note: Do not drive further than 120 miles (200 km). Drive only to the closest Ford Motor Company authorized dealer or tire repair shop tohave your tire inspected. •...

• Do not store the temporary mobility kit unsecured inside thepassenger compartment of the vehicle as it may cause injury during asudden stop or collision. Always store the kit in its original location. • After sealant use, the TPMS sensor and valve stem on the wheel mustbe replaced by an authorized...

8. Inflate the tire to the pressurelisted on the tire label located onthe driver’s door or the door jambarea. Note: When the sealing compound is first added into the tire, the airpressure gauge reading on thecompressor unit may indicate ahigher value; this is normal andshould be no reason for concer...

Check the air pressure of your tires as follows: 1. Remove the valve cap from the tire valve. 2. Unhook the black hose from the side of the compressor and fastenfirmly on the valve stem by turning clockwise. 3. Press down and turn the dial clockwise to the air position. Turn on thekit by pressing th...

Removal of the sealant canister from the temporary mobility kit 1. Unwrap the clear tube from thecompressor housing. 2. Locate the yellow cap at the endof the clear tube. 3. Using the yellow cap tool, pressthe tab located on the temporarymobility kit compressor housingwhile pulling up on the sealant...

Be sure to check the sealantcompound’s “use by” date regularly.The “use by” date is on the lowerright hand corner of the labellocated on the sealant canister (bottle). The sealant canister should be replaced after four years. TECHNICAL SPECIFICATIONS Wheel Lug Nut Torque Specifications WARNING: When...

ENGINE SPECIFICATIONS Engine 3.7L V6 Engine 5.0L V8 Engine Cubic inches 227 302 Required fuel Minimum 87 octane Minimum 87 octane Firing order 1-4-2-5-3-6 1-5-4-8-6-3-7-2 Ignition system Coil on plug Coil on plug Spark plug gap 0.049–0.053 inch(1.25-1.35 mm) 0.049–0.053 inch(1.25–1.35 mm) Compressio...

MOTORCRAFT PART NUMBERS Component 3.7L V6 engine 5.0L V8 engine Air filter element FA-1897 FA-1897 Battery 2 BXT-96R-590 BXT-96R-590 Oil filter FL-500-S FL-500-S Spark plugs 1 SP520 SP519 Cabin air filter FP53 FP53 Windshield wiperblade WW-2201-PF (driver side) WW-2001-PF (passenger side) 1 For spar...

VEHICLE IDENTIFICATION NUMBER The vehicle identification number islocated on the driver sideinstrument panel. Please note that in the graphic,XXXX is representative of yourvehicle identification number. The Vehicle Identification Number (VIN) contains the followinginformation: A. World manufacturer ...

Peace of mind • Remote start • Full vehicle covers • Vehicle security systems • Keyless entry keypad • Wheel locks • Locking fuel plug • Bumper mounted parking assist system* *Ford Licensed Accessories (FLA) are warranted by the accessorymanufacturer’s warranty. Ford Licensed Accessories are fully d...

FORD ESP EXTENDED SERVICE PLANS (U.S. ONLY) More than 32 million Ford and Lincoln owners have discovered thepowerful protection of Ford ESP. It is the only extended service planbacked by Ford Motor Company, and provides “peace of mind”protection beyond the New Vehicle Limited Warranty coverage. Up t...

FORD ESP EXTENDED SERVICE PLANS (CANADA ONLY) You can get more protection for your vehicle by purchasing a FordExtended Service Plan (ESP). Ford ESP is the only service contractbacked by Ford Motor Company of Canada, Limited. Depending on theplan you purchase, Ford ESP provides benefits such as: • R...

GENERAL MAINTENANCE INFORMATION Why Maintain Your Vehicle? Carefully following the maintenance schedule helps protect against majorrepair expenses resulting from neglect or inadequate maintenance andmay also help to increase the value of your vehicle when you sell ortrade it. Keep all receipts for c...

They can perform any services that are required on your vehicle, fromgeneral maintenance to collision repairs. Note: Not all dealers have extended hours or bodyshops. Please contact your dealer for details. Protecting your investment Maintenance is an investment that will pay dividends in the form o...

Additives and Chemicals Ford Motor Company recommended additives and chemicals are listed inthe Owner Manual and in the Ford Workshop Manual. Additionalchemicals or additives not approved by Ford and are not recommendedas part of normal maintenance. Please consult your Warranty Manual for complete w...

Normal Scheduled Maintenance * At every oil changeinterval as indicated bythe message center Change engine oil and filter. ** Rotate tires, inspect tire wear and measuretread depth. Perform multi-point inspection(recommended). Inspect automatic transmission fluid level.Consult dealer for requirement...

Additional Maintenance Items 1 Every 20000 miles(32000 km) Replace cabin air filter (if equipped). Every 30000 miles(48000 km) Replace engine air filter. At 100000 miles(160000 km) Change engine coolant. 2 Every 100000 miles(160000 km) Replace spark plugs. Inspect accessory drive belt(s). 3 Every 15...

Maintenance Schedule Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ...

SPECIAL OPERATING CONDITIONS – 3.7L AND 5.0L ENGINES If you operate your vehicle primarily in any of the following conditions, you need to perform additional maintenance as indicated. If you occasionally operate your vehicle under any of these conditions, it is not necessary to perform the additiona...

Extensive idling and/or low-speed driving for long distances as in heavy commercial use (i.e. delivery, taxi, patrol car or livery) As required Change engine oil and filter as indicated byinformation display and perform services listed inNormal Scheduled Maintenance chart Inspect frequently,service ...

Special Operating Condition Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D A...

EXCEPTIONS Normal vehicle axle maintenance: Rear axles and power take-off (PTO) units with synthetic fluid and light-duty trucks equipped withFord-design axles are lubricated for life; do not check or change fluidunless a leak is suspected, service is required or the assembly has beensubmerged in wa...

ENGINE COOLANT CHANGE RECORD 3.7L and 5.0L Engines * Initial change Six years or 100000 miles (160000 km)(whichever comes first) After initial change Every three years or 50000 miles (80000 km) * Shelby GT500 owners: Refer to the Shelby GT500 supplement. Engine Coolant Change Log D EALER V ALIDATION...

GENERAL INFORMATION Ensure that you review your device’s user guide before using it withSYNC. Support The SYNC support team is available to help you with any questions youcannot answer on your own. Monday-Saturday, 8:30 am-8pm EST In the United States, call: 1–888–270–1055 In Canada, call: 1–800–565...

When using SYNC, do not: • Operate playing devices if the power cords or cables are broken, splitor damaged. Carefully place cords and cables where they cannot bestepped on or interfere with the operation of pedals, seats,compartments or safe driving abilities. • Leave playing devices in the vehicle...

Pairing Subsequent Phones Note: Make sure the vehicle ignition and radio are turned on and the transmission is in P (Park) (vehicles equipped with an automatictransmission) or 1st gear (vehicles equipped with a manual transmission). Note: SYNC can store up to 12 previously paired phones. 1. Press th...

“DIAL” “Plus” “Star” Note: To exit dial mode, press and hold the phone button or press MENU to go to the PHONE menu. At any time, you can say the following global commands: GLOBAL COMMANDS “Exit” “Help” “Phone” “ Services” * “Vehicle Health Report” * “Voice settings” * If equipped, U.S. only Making ...

Receiving Calls When receiving a call, you can: • Answer the call by pressing the phone button. • Reject the call by pressing and holding the phone button. • Ignore the call by doing nothing. Phone Options during an Active Call During an active call, you have additional menu features which becomeava...

Accessing Features through the Phone Menu SYNC’s phone menu allows you to redial a number, access your callhistory and phone book and send text messages as well as access phoneand system settings. You can also access advanced features such as 911Assist™, Vehicle Health Report and SYNC Apps.1. Press ...

Text Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages.The system can also read incoming text messages to you so that you donot have to take your eyes off the road. Receiving a Text Message Note: This is a phone-dependent feature. ...

2. Scroll to cycle through the message options in the following chart.3. Select the desired text message. Each text message is sent with the following signature: “This message was sent from my < Ford or Lincoln >”. 4. Press Recipients, then choose who to send it to using the Phone Book or Phon...

3. Scroll to select from the following options: When you select: You can: Phone Status See the provider, name, signal power, batterypower and roaming status of your connectedphone.Press OK to select and scroll to view theinformation. When done, press OK again toreturn to the phone status menu. Set R...

When you select: You can: Modify Phonebook Modify the contents of your phone book (i.e.add, delete, download). Press OK to selectand scroll between: Add Contacts: Press OK to add more contactsfrom your phone book. “Push” the desiredcontact(s) on your phone. Refer to yourphone’s user guide on how to ...

System Settings System Settings provide access to your Bluetooth Devices andAdvanced menu features. The Bluetooth Devices menu allows you to add, connect, delete and set aphone as “primary” as well as turn your Bluetooth feature on and off. The Advanced menu allows you to access and set prompts, lan...

If you select: You can: Connect BluetoothDevice Connect a previously pairedBluetooth-enabled phone.1. Press OK to select and view a list ofpreviously paired phones.2. Scroll until the desired device is chosen,then press OK to connect the phone. Note: Only one device can be connected at a time. When ...

Advanced Menu Options This menu allows you to access settings such as prompts, languages,defaults, perform a master reset, install an application and view systeminformation.1. Press the PHONE hard button.2. Select the Settings tab, then Advanced.3. Use the arrow buttons to choose between things like...

Note: SYNC 911 Assist feature must be set on prior to the incident. Note: Before setting this feature on, ensure that you read the 911 Assist privacy notice later in this section for important information. Note: If 911 Assist is turned on or off by any user, that setting applies for all paired phone...

Vehicle Health Report WARNING: Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. Vehicle Health Report supplements, but cannotreplace normal maintenance and vehicle inspection. Vehicle HealthReport only monitors c...

2. Scroll until Vehicle Health appears in the display, then press OK.3. Select from one of the options listed in the following table. If your vehicle is equipped with a navigation system, run a report by performing the following (after the vehicle has been running a minimumof 60 seconds):1. Press th...

Disconnecting from SYNC Services 1. Press and hold the phone button on the steering wheel.2. Say “Good-bye” from the SYNC Services main menu. SYNC Services Quick Tips Personalizing You can personalize your services feature toprovide quicker access to your most used orfavorite information. You can sa...

USING SYNC WITH YOUR MEDIA PLAYER You can access and play music from your digital music player over thevehicle’s speaker system using the system’s media menu or voicecommands. You can also sort and play your music by specific categoriessuch as artists, albums, etc. SYNC is capable of hosting nearly ...

Supported Media Players, Formats and Metadata Information SYNC 威 is capable of hosting nearly any digital media player, including iPod 威 , Zune™, “Plays from device” players, and most USB drives. Supported audio formats include MP3, WMA, WAV and AAC. It is also able to organize your indexed media fr...

Accessing the Media Music Library This menu allows you to select and play your media by artist, album,genre, playlist, track, similar music or even to explore what is on yourUSB device.1. Make sure that your device is plugged into the USB port and is turned on. 2. Press the MEDIA hard button.3. Sele...

Bluetooth Devices Menu Options This menu allows you to add, connect and delete devices as well as turnBluetooth on and off.1. Press the MEDIA hard button.2. Select the User Device tab, then BT Devices.3. Select from: When you select: You can: Connect Connect a previously pairedBluetooth-enabled phon...

Phone issues Issue Possible Cause(s) Possible Solution(s) I’m having troubleconnecting myphone to SYNC. • This is a phone-dependentfeature, OR • Possible phone malfunction. • Go to the website to review your phone’s compatibility. • Try turning off the device, resetting the device or removingthe dev...

Voice command issues Issue Possible Cause(s) Possible Solution(s) SYNC does notunderstand or iscalling the wrongcontact when Iwant to make acall. You may be usingthe wrong voicecommands, ORYou may not besaying the nameexactly as it issaved, ORContacts in yourphonebook maybe very short andsimilar, or...

NAVIGATION CONTROLS Type 1 WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsibility is the safeoperation ...

Note: Some features such as SIRIUS satellite radio may not be available in your location. Check with your authorized dealer. If you select: You can: A. Memory presets In radio and satellite radio mode, press toaccess your saved preset stations or channels.To save to a station or channel, tune to the...

DISPLAY MODE You can choose to turn your screen on or off and also if you would liketo view the status bars on the top and bottom of the screen. Press DISPto see the options. Display Mode Voice Commands The following voice commands are available in display mode. Ifyou are not in display mode, press ...

Customizing Your Home Screen Depending on your vehicle’s option package and software, your screensmay vary in appearance from the screens shown in this section. Yourfeatures may also be limited depending on your market. Check with yourauthorized dealer for availability. Press the house icon to acces...

Editing and Deleting Photos To edit photos, go to the home screen, then:1. Touch the current photo on the home screen.2. Select the Edit button.3. Adjust the photo by zooming in or out, moving right, left, up or down and also rotating left or right. Note: Press the Reset button to return to the orig...

Helpful Hints • Make sure the interior of the vehicle is as quiet as possible. Windnoise from open windows and road vibrations may prevent the systemfrom correctly recognizing spoken commands. • After pressing the voice icon, wait until after the tone sounds and“Listening” appears before saying a co...

SYSTEM MENU FEATURES Your system offers many menu features such as allowing you to adjustthe touchscreen brightness, time and language, feedback and systemsettings. You can access these options by pressing the MENU hardbutton. If you select: You can: Display Brightness allows you to adjust screen br...

ENTERTAINMENT Your system offers many media options. You can access these optionsusing the touchscreen or voice commands. AM/FM Radio Press the RADIO hard button. To change between AM and FM1/FM2, touch the AM or FM tab. When you select: You can: Show Options Scan allows you to hear a brief sampling...

When you select: You can: Show Presets View the preset stations. To save a station,press and hold one of the memory presethard buttons or memory preset areas on thetouch screen. There is a brief mute while thestation is being saved, then sound returnswhen it’s done. Set PTY/All Select a category of ...

HD Radio™ Information (If Available) Note: HD Radio broadcasts are not available in all markets. HD Radio technology is the digital evolution of analog AM/FM radio. Yoursystem has a special receiver which allows it to receive digital broadcasts(where available) in addition to the analog broadcasts i...

When you select: You can: Tune Go up and down the frequency in individualincrements.If the current station has multiple digitalbroadcasts, the multicast indicator appears.Press Tune repeatedly to advance through allavailable broadcasts. If you are on the lastbroadcast channel, turn to advance to the...

HD Radio Reception/Station Troubleshooting Potential reception issues Reception area If you are listening to a multicast station andyou are on the fringe of the reception area,the station may mute due to weak signalstrength.If you are listening to HD1, the systemswitches back to the analog broadcast...

HD Radio Voice Commands If you are listening to the radio, press the voice button on thesteering wheel controls. When prompted, say any of thecommands in the following chart. If you are not listening to the radio, press the voice button and, after thetone, say “Radio”, then any of the commands in th...

SIRIUS 姞 Satellite Radio Voice Commands If you are listening to SIRIUS satellite radio, press the voicebutton on the steering wheel controls. When prompted, say anyof the commands in the following chart. If you are not listening to SIRIUS satellite radio, press the voice buttonand, after the tone, s...

SIRIUS 姞 Information Note: SIRIUS reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particularchannels, and its prices, at any time, with or without notice to you. FordMotor Company shall not be responsible for any such programming ...

CD Press the MEDIA hard button, then select the CD tab on thetouch screen. If there is no disc in the system, NO DISCappears in the status bar and you cannot access the CD screen. Once a disc is loaded, you can choose from Scan, Compress, Repeat,Shuffle, Track List and Record. When you select: You c...

MP3 Press the MEDIA hard button, then select the CD tab on thetouch screen. If there is no disc in the system, NO DISCappears in the status bar and you cannot access the CD screen. Once a disc is loaded, you can choose from Scan, Compress, Repeat,Shuffle, Folder Mode and Folder List. When you select...

Disc Voice Commands If you are listening to or watching a disc, press the voice buttonon the steering wheel controls. When prompted, say any of thecommands in the following chart. If you are not listening to or watching a disc, press the voice button and,after the tone, say “Disc”, then any of the c...

Video CD Voice Commands If you are watching a video CD, press the voice button on thesteering wheel controls. When prompted, say any of thecommands in the following chart. If you are not watching a video CD, press the voice button and, after thetone, say “Video CD”, then any of the commands in the f...

Accessing the Music in Your Jukebox Once you have saved music to your jukebox, you can then choosedifferent ways to play the music.1. Press the MEDIA hard button on the navigation system.2. Select the Jukebox tab on the touch screen. You can then select from the following options: When you select: Y...

Creating a Playlist Press the MEDIA hard button, then select the Jukebox tab on the touchscreen.1. Select Options.2. Select Edit Playlists, then which playlist you would like to create.3. Select which category you would like to access from your saved music.4. Select the desired songs and then press ...

User Device If your vehicle is equipped with SYNC 威 , there is a User Device tab. For more information, refer to the SYNC 威 chapter. Line In (Auxiliary Input Jack) Your vehicle is equipped with an audio input jack which allows a portableaudio device to be plugged into your vehicle’s audio system. To...

SIRIUS Travel Link Voice Commands Press the voice button and, after the tone, say “Travel Link”,then any of the commands in the following chart: “TRAVEL LINK” “5–day weather forecast” “NBA schedule” “Baseball schedule” “NBA scores” “Baseball scores” “NFL schedule” “College basketball schedule” “NFL ...

SOUND The sound menu allows you to access and adjust settings such as Bass,Treble, Fade, Balance, Speed Compensated Volume (SCV) and thevisualizer. Press the SOUND hard button. When you select: You can: Bass/Treble Increase or decrease levels by pressing + or -. Balance/Fade Adjust the sound between...

When you select: You can: Traffic Preferences Have the system color code roads accordingto speed of traffic flow or add special icons tothe map for things such as road work,accidents, etc.You can also choose to receive traffic alerts. * NavigationPreferences Access and adjust guidance prompts, avera...

Map Icons Vehicle mark shows current location of the vehicle. It stays in the center of the map display, except when in scroll mode. Scroll cursor allows you to scroll the map; the icon is fixed in the center of the screen. The map position closest to the cursoris in a window on the top center part ...

No GPS symbol indicates that insufficient GPS satellite signals are available for accurate map positioning. This icon may beintermittently displayed under normal operation in an area with poor GPS access. Quick-touch Buttons When in map mode, touch anywhere on the map display to access thefollowing ...

Troubleshooting Symptoms Possible Cause Action Focus error. System unable to playreproduced disc. Contact your dealer. Bad disc. Disc was insertedupside down or thesystem is unable toread the informationon the disc. The systemautomatically ejectsthe disc. Track error. The system is unableto reproduc...

GENERAL INFORMATION SYNC 姞 End User License Agreement (EULA) • You have acquired a device (“DEVICE”) that includes software licensed by FORD MOTOR COMPANY from an affiliate of MicrosoftCorporation (“MS”). Those installed software products of MS origin, aswell as associated media, printed materials, ...

DEVICE downloads licenses for protected content, you agree thatMicrosoft may include a revocation list with the licenses. Contentowners may require you to upgrade the SOFTWARE on your DEVICEto access their content. If you decline an upgrade, you will not be ableto access content that requires the up...

laws and treaties. This EULA grants you no rights to use such content.All rights not specifically granted under this EULA are reserved by MS,Microsoft Corporation, FORD MOTOR COMPANY, third party softwareand service providers, their affiliates and suppliers. Use of any on-lineservices which may be a...

End user notice Microsoft 姞 Windows 姞 Mobile for Automotive Important Safety Information This system Ford SYNC™ contains software that is licensed toManufacturer FORD MOTOR COMPANY by an affiliate of MicrosoftCorporation pursuant to a license agreement. Any removal, reproduction,reverse engineering ...

Software. TeleNav also does not warrant the accuracy of the map orother data used for the TeleNav Software. Such data may not alwaysreflect reality due to, among other things, road closures, construction,weather, new roads and other changing conditions. You are responsiblefor the entire risk arising...

8.3 By using the TeleNav Software, you consent to receive from TeleNavall communications, including notices, agreements, legally requireddisclosures or other information in connection with the TeleNav Software(collectively, “Notices”) electronically. TeleNav may provide such Noticesby posting them o...

OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF ORINABILITY TO USE THIS DATA, ANY DEFECT IN THIS DATA, OR THEBREACH OF THESE TERMS OR CONDITIONS, WHETHER IN ANACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVENIF NT OR ITS LICENSORS HAVE BEEN ADVISED OF THEPOSSIBILITY OF SUCH DAMAGES. Some S...

furnished shall be marked and embedded as appropriate with thefollowing “Notice of Use”, and be treated in accordance with such Notice: NOTICE OF USE CONTRACTOR (MANUFACTURER/ SUPPLIER) NAME: NAVTEQ CONTRACTOR (MANUFACTURER/SUPPLIER) ADDRESS: 425 West Randolph Street, Chicago, IL 60606. This Data is...

911 Assist™ ..............................335 A ABS (see Brakes) .....................169 Accessing call history/phonebook during active call .............327 Accessing the help screen .......393 Accessing the music inyour jukebox .....................386–387 Accessing your media menufeatures .........