Ford 2013 Flex v.2- Manuals

ABOUT THIS MANUAL Thank you for choosing Ford. We recommend that you take some time toget to know your vehicle by reading this manual. The more that you knowabout it, the greater the safety and pleasure you will get from driving it. WARNING: Always drive with due care and attention when using and op...

Symbol Description Symbol Description Symbol Description Serviceengine soon Side airbag Stabilitycontrol Windshielddefrost anddemist Windshieldwasher andwiper DATA RECORDING Service Data Recording Service data recorders in your vehicle are capable of collecting andstoring diagnostic information abou...

information”), only to help provide you with the directions,traffic reports, or business searches that you request. If you donot want Ford or its vendors to receive this information, do notactivate the service. Ford Motor Company and the vendors it usesto provide you with this information do not sto...

Scheduled Maintenance and Mechanical Repairs One of the best ways for you to make sure that your vehicle providesyears of service is to have it maintained in line with ourrecommendations using parts that conform to the specifications detailedin this Owner’s Manual. Genuine Ford and Motorcraft parts ...

MOBILE COMMUNICATIONS EQUIPMENT Using mobile communications equipment is becoming increasinglyimportant in the conduct of business and personal affairs. However, youmust not compromise your own or others’ safety when using suchequipment. Mobile communications can enhance personal safety andsecurity ...

GENERAL INFORMATION See the following sections for directions on how to properly use safetyrestraints for children. WARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be purchased separately from the...

Note: The child seat must rest tightly against the vehicle seat. It may be necessary to lift or remove the head restraint. See the Seats chapter for information on head restraints. BOOSTER SEATS WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back...

Types of Booster Seats • Backless booster seats If your backless booster seat has a removable shield, remove the shield.If a vehicle seating position has a low seat back or no head restraint, abackless booster seat may place your child’s head (as measured at thetops of the ears) above the top of the...

If the booster seat slides on the vehicle seat, placing a rubberized meshsold as shelf or carpet liner under the booster seat may improve thiscondition. Do not introduce any item thicker than this under the boosterseat. Check with the booster seat manufacturer’s instructions. INSTALLING CHILD SEATS ...

Using Lower Anchors and Tethers for CHildren (LATCH) WARNING: Never attach two child safety seats to the same anchor. In a crash, one anchor may not be strong enough to hold two child safety seat attachments and may break, causing serious injuryor death. WARNING: Depending on where you secure a chil...

• Second row bench seats andthird-row passenger side The LATCH anchors are located atthe rear section of the rear seatbetween the cushion and seatbackbelow the symbols as shown. Followthe child seat manufacturer’sinstructions to properly install achild seat with LATCH attachments. Follow the instruc...

The tether strap anchors in your vehicle are in the following positions(shown from top view): • Second row bucket seats andthird-row passenger side • Second row bench seats andthird-row passenger side Perform the following steps to install a child safety seat with tether anchors: Note: If you instal...

• Second row center seat positions: Route the child safety seat tether strap over the top of the the head restraint. If needed the headrestraint can be removed to improve the fit of the child safety seat ortether strap. See Rear seats in this chapter for head restraint information. • Third row seat ...

• Third row seat Note : The cargo tie-downs at the rear edge of the floor are not tether anchors.3. Clip the tether hook to the anchor as shown. The tether hook may betwisted 1/2 turn to improve installation. If the tether strap is clipped incorrectly, the child safety seat may not beretained proper...

CHILD SAFETY LOCKS The childproof locks are located on the rear edge of each rear door andmust be set separately for each door. Setting the lock for one door willnot automatically set the lock for both doors. • Insert the key and turn to thelock position (key horizontal) toengage the childproof lock...

PRINCIPLES OF OPERATION WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. WARNING: To reduce the risk of injury, make sure children sit where they can be properly restrained. WARNING: Never let a passenger hold a child on his or her lap while th...

FASTENING THE SAFETY BELTS The front outboard and rear safety restraints in the vehicle arecombination lap and shoulder belts. 1. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) until you hear a snap and feelit latch. Make sure the tongue is...

Pregnant women should alwayswear their safety belt. The lap beltportion of a combination lap andshoulder belt should be positionedlow across the hips below the bellyand worn as tight as comfort willallow. The shoulder belt should bepositioned to cross the middle ofthe shoulder and the center of thec...

Automatic locking mode: In this mode, the shoulder belt or lap belt is automatically pre-locked. The belt will still retract to remove any slack inthe shoulder or lap belt. The automatic locking mode is not available onthe driver safety belt. When to use the automatic locking mode: This mode should ...

Safety Belt Extension Assembly WARNING: Do not use extensions to change the fit of the shoulder belt across the torso. WARNING: Do not use extensions with an inflatable safety belt. Safety belt extensions are vehicle specific. Please see an authorizeddealer to ensure you obtain the proper safety bel...

SAFETY BELT WARNING LIGHT AND INDICATOR CHIME This lamp illuminates and an audible warning will sound if thedriver’s safety belt has not been fastened when the vehicle’signition is turned on. Conditions of operation If... Then... The driver’s safety belt is notbuckled before the ignitionswitch is tu...

Note: The driver and front passenger Belt-Minder 威 are deactivated and activated independently. When deactivating or activating one seatingposition, do not buckle the other position as this will terminate theprocess. Read Steps 1 - 5 thoroughly before proceeding with the deactivationor activation pr...

REAR INFLATABLE SAFETY BELT (IF EQUIPPED) WARNING: Do not attempt to service, repair, or modify the rear inflatable safety belt. The rear inflatable safety belts are fitted in the shoulder portion of thesafety belts of the second-row outboard seating positions. Note: The rear inflatable safety belts...

• During a collision of sufficient force, the inflatablebelt will inflate from inside the webbing. • The fully inflated belt’s increased diameter moreeffectively holds the occupant in the appropriateseating position, and spreads crash forces over morearea of the body than regular safety belts. Thish...

CHILD RESTRAINT AND SAFETY BELT MAINTENANCE Inspect the vehicle safety belts and child safety seat systems periodicallyto make sure they work properly and are not damaged. Inspect thevehicle and child seat safety belts to make sure there are no nicks, tearsor cuts. Replace if necessary. All vehicle ...

PERSONAL SAFETY SYSTEM™ The Personal Safety System provides an improved overall level of frontalcrash protection to front seat occupants and is designed to help furtherreduce the risk of airbag-related injuries. The system is able to analyzedifferent occupant conditions and crash severity before act...

The airbags are a supplemental restraint system and are designed towork with the safety belts to help protect the driver and right frontpassenger from certain upper body injuries. Airbags DO NOT inflateslowly; there is a risk of injury from a deploying airbag. Note: You will hear a loud bang and see...

DRIVER AND PASSENGER AIRBAGS WARNING: Never place your arm or any objects over an airbag module. Placing your arm over a deploying airbag can result in serious arm fractures or other injuries. Objects placed on or over theairbag inflation area may cause those objects to be propelled by theairbag int...

If you think that the state of the passenger airbag status indicator lampis incorrect, check for the following: • Objects lodged underneath the seat • Objects between the seat cushion and the center console (if equipped) • Objects hanging off the seat back • Objects stowed in the seatback map pocket...

DO NOT attempt to repair or service the system; take your vehicleimmediately to an authorized dealer. If it is necessary to modify an advanced front airbag system toaccommodate a person with disabilities, contact the Ford CustomerRelationship Center at the phone number shown in the Customer Assistan...

The system consists of the following: • A label or embossed side panel indicatingthat side airbags are fitted to your vehicle. • Side airbags located inside the seatback ofthe driver and front passenger seats. • Crash sensors and monitoring system with readinessindicator. Refer to Crash sensors and ...

Children 12 years old and under should always be properly restrained inthe rear seats. The Safety Canopy will not interfere with childrenrestrained using a properly installed child or booster seat because it isdesigned to inflate downward from the headliner above the doors alongthe side window openi...

If any of these things happen, even intermittently, have the supplementalrestraint system serviced at an authorized dealer immediately. Unlessserviced, the system may not function properly in the event of acollision. The safety belt pretensioners, rear inflatable safety belts and the airbagsupplemen...

PRINCIPLE OF OPERATION The remote control allows you to: • remotely lock or unlock the vehicle doors • remotely open the power liftgate (if equipped) • remotely start or stop the engine (if equipped) • arm and disarm the anti-theft system (if equipped) • activate the panic alarm Intelligent Access (...

Intelligent Access (If Equipped) The system uses a radio frequency signal to communicate with yourvehicle and authorize your vehicle to unlock when commanded (eitherby touching the inside of the driver door or front passenger exterior doorhandle, by activating the exterior power liftgate button, or ...

The intelligent access key alsocontains a removable mechanical keyblade that can be used to unlock thedriver door. Slide the release on theback of the transmitter to release thekey blade, then pull the blade out. Note: Your vehicle’s back-up keys were issued with a security tag thatprovides importan...

2. Press and hold button 1 for fiveseconds. A tone will soundconfirming memory position hasbeen set. Continue to hold until asecond tone is heard after fiveseconds. 3. Within three seconds press the lock button on the remote control. 4. Wait 10 seconds, then press the unlock button on the remote con...

The horn will chirp if the system fails to start (unless quiet start is on).Quiet start will run the blower fan at a slower speed to reduce noise. Itcan be switched on or off. Refer to the Information Displays chapter. Note: If the vehicle has been remote started and is equipped with an integrated k...

• Audio system maximum volume of 45%. A message in the audiosystem is displayed when attempting to exceed the limited volume.Also, Speed sensitive compensated volume (sscv) feature will bedisabled. • Always on setting. When this is selected, you will not be able todisable AdvanceTrac, 911 Assist or ...

CLEARING ALL MYKEYS Note: All programmed MyKeys can be cleared within the same key cycle in which a MyKey was created, otherwise an admin key is required toclear the keys. To clear all MyKeys (which removes all restrictions and returns them toadmin key status), use the information display control to...

LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lockand unlock the vehicle. Power Door Locks A. Unlock B. Lock Remote Control The remote control can be used any time the vehicle is not running. Unlocking the Doors (Two-Stage Unlock) Press the button to unlock t...

Activating Intelligent Access (If Equipped) The intelligent access key must be within 3 feet (1 meter) of the vehicle. At the Front Doors Pull a front exterior door handle. The door will unlock and can be opened. Press and hold the door handle locksensor to lock the vehicle. At the Liftgate Press th...

Power Liftgate (If Equipped) WARNING: Make sure all persons are clear of the power liftgate area before using the power liftgate control. WARNING: Keep keys out of the reach of children. Do not allow children to operate the power liftgate, or to play near to an open or moving power liftgate. Note: C...

To open or close from the instrument panel: Press the instrument panel button. To open or close with the remote control: Press the remote control button twice within three seconds. To open with the outside liftgatecontrol button: 1. Unlock the liftgate with the remotecontrol or power door unlock con...

Resetting the Power Liftgate The liftgate may not operate properly and may need to be reset if any ofthese conditions occur: • a low voltage or dead battery • disconnected battery • the liftgate is manually closed and left ajar (unlatched) To reset the power liftgate: 1. Disconnect the battery for 2...

Programming a Personal Entry Code To create your own personal entry code: 1. Enter the factory set code. 2. Press the 1 • 2 on the keypad within five seconds. 3. Enter your personal 5-digit code. Each number must be enteredwithin five seconds of each other. 4. For memory recall feature, enter the si...

Anti-Scan Feature The keypad will go into an anti-scan mode if the wrong code has beenentered seven times (35 consecutive button presses). This mode disablesthe keypad for one minute and the keypad lamp will flash. The anti-scan feature will turn off after: • one minute of keypad inactivity • pressi...

ADJUSTING THE STEERING WHEEL WARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. Refer to Sitting In the Correct Position in the Seats chapter. 1. Unlock the steering column. 2. Adjust the steering wheel to thedesired p...

AUDIO CONTROL SEEK: Press to select the next or previous stored preset or track.Press and hold to select the next orprevious frequency or seek througha track. MEDIA: Press repeatedly to scroll through available audio modes. MUTE: Press to silence the radio. VOL (Volume): Press to increase or decreas...

CRUISE CONTROL Type 1 Type 2 Refer to the Cruise Control chapter for information on this feature. SET RES CNCL ON OFF GAP Steering Wheel 87 2013 Flex (471) Owners Guide gf, 2nd PrintingUSA (fus)

ADJUSTABLE PEDALS (IF EQUIPPED) WARNING: Never adjust the accelerator and brake pedal with feet on the pedals while the vehicle is moving. The control is located on the left side of the steering column. Press andhold the appropriate control to move the pedals. A. Farther B. Closer The pedal position...

WINDSHIELD WIPERS Note: Fully defrost the windshield in icy conditions before turning on the windshield wipers. Rotate the end of the control awayfrom you to increase the speed ofthe wipers. Rotate toward you todecrease the speed of the wipers. Speed Dependent Wipers (If Equipped) When your vehicle ...

WINDSHIELD WASHERS Note: Do not operate the wipers on a dry windshield. This may scratch the glass, damage the wiper blades or cause the wiper motor to burn out.Always use the windshield washer before wiping a dry windshield. Note: Do not operate the washer when the washer reservoir is empty. This m...

LIGHTING CONTROL A. Off B. Parking lamps, instrument panellamps, license plate lamps and taillamps C. Headlamps High Beams • Push the lever toward theinstrument panel to activate. • Push the lever toward theinstrument panel again or pullthe lever towards you todeactivate. Headlamp Flasher Pull towar...

AUTOLAMPS (If equipped) WARNING: In severe weather conditions, it may be necessary to switch your headlamps on manually. Note: If the vehicle is equipped with autolamps, it will have the windshield wiper rainlamp feature. When the windshield wipers are turned to low- or high-speed wiping during dayl...

3. Turn the lighting control to the off position. 4. Turn the ignition on. 5. Turn the ignition off. 6. Turn the lighting control to the autolamp position. The headlamps andparking lamps will turn on. 7. Turn the lighting control to the off position when the desired delaytime has been reached. The h...

FRONT FOG LAMPS The fog lamps can be turned onwhen the lighting control is pulledtoward you and in the headlamps,parking lamps or autolampspositions. The fog lamps will not operatewhen the high beams are active. DIRECTION INDICATORS • Push down to activate the leftturn signal. • Push up to activate ...

INTERIOR LAMPS Front map lamps The map lamps are located on theoverhead console. Press the lens ofeach map lamp to turn on the lamps.The map lamps also turn on when: • any door is opened. • the instrument panel dimmerswitch is rotated up, past the detent, until the courtesy lamps come on. • the remo...

POWER WINDOWS WARNING: Do not leave children unattended in the vehicle and do not let children play with the power windows. They may seriously injure themselves. WARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in t...

Window Lock A. Unlock B. Lock Press the control to lock or unlock the rear window controls. Accessory Delay You can use the window switches for several minutes after you turn theignition off, or until either front door is opened. EXTERIOR MIRRORS Power Exterior Mirrors WARNING: Do not adjust the mir...

Fold-Away Exterior Mirrors Push the mirror toward the door window glass. Make sure that you fullyengage the mirror in its support when returning it to its original position. Power-Folding Mirrors (If Equipped) Note: Activating the mirrors 10 or more times within one minute, or repeated folding and u...

Integrated Blind Spot Mirrors (If Equipped) WARNING: Objects in the blind spot mirror are closer than they appear. Blind spot mirrors have an integrated convex mirror built into the upperoutboard corner of the exterior mirrors. They are designed to assist youby increasing visibility along the side o...

INTERIOR MIRROR WARNING: Do not adjust the mirror when your vehicle is moving. Note: Do not clean the housing or glass of any mirror with harsh abrasives, fuel or other petroleum or ammonia based cleaning products. You can adjust the interior mirror to your preference. Some mirrors alsohave a second...

GAUGES Type 1 Cluster shown in standard measure – metric clusters similar. A. Tachometer B. Information display. See Information displays for more information. C. Speedometer D. Fuel gauge Fuel gauge Indicates approximately how much fuel is left in the fuel tank (when theignition is on). The fuel ga...

Type 2 Cluster shown in standard measure – metric clusters similar. A. Information display. See Information displays for more information. B. Speedometer C. Infotainment display. See MyFord Touch™ for more information. WARNING LAMPS AND INDICATORS There indicators can alert you to a vehicle conditio...

Heads up display (if equipped) A red beam of lights will illuminate on the windshield in certaininstances when using adaptive cruise control and/or thecollision warning system. It will also illuminate momentarily when you start your vehicle to make sure the display works. High beams Illuminates when...

Powertrain malfunction/reduced power (RTT) Illuminates when a powertrain or an AWD fault has beendetected. Contact your authorized dealer as soon as possible. Safety belt Reminds you to fasten your safety belt. A Belt-Minder 威 chime will also sound to remind you to fasten your safety belt. Service e...

GENERAL INFORMATION WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsibility is the safeoperation of the ...

Fuel Economy Distance to EInst Fuel EconAverage Fuel†See Trip and fuel economy computer later in this section for more information. Information Intelligent AWD — Displays power distribution between the front and rearwheels. More power to either front or rear wheels will be displayed bymore area fill...

Settings Convenience Auto HighbeamAutolamp Delay Off or number of seconds Compass DisplayCalibrate (ifequipped) Hold OK toCalibrate Zone (1–15) DTE Calculation Normal or Towing Easy Entry/ExitLocks AutolockAutounlockRemote Unlock All Doors orDriver First Oil life Reset Set XXX% Power Liftgate Switch...

Compass (If Equipped) Displays the vehicle’s heading direction. To calibrate the compass: Enter the compass menu and select Calibrate.Follow the prompts. To set the compass zone: Enter the compass menu and select Set. Followthe prompts. See the diagram below to determine your magnetic zone. Determin...

• Elapsed trip time— timer stops when the vehicle is turned off andrestarts when the vehicle is restarted. • Average fuel economy — shows the average fuel economy for a giventrip. • Estimated amount of fuel consumed — shows the amount of fuel usedfor a given trip. Fuel Economy Use the left/right arr...

*MyKey Create MyKey Press and hold OK to create MyKey 911 Assist Always On / User Selectable AdvanceTrac Always On / User Selectable Max Speed Set desired speed / Off Speed Minder Set desired speed / Off Volume Limiter On / Off Do Not Disturb Always On / User Selectable Clear MyKeys Hold OK to Clear...

Driver Alert Displays the associated driver alert graphic. System Check All active warnings will display first if applicable. The system checkmenu may appear different based upon equipment options and currentvehicle status. Use the up/down arrow buttons to scroll through thelist. INFORMATION MESSAGE...

Battery and Charging System Messages Action / Description Check ChargingSystem Displayed when the charging system needsservicing. If the warning stays on or continuesto come on, contact your authorized dealer assoon as possible. Turn Power Off toSave Battery Displayed when the battery managementsyst...

Collision Warning System Messages Action / Description Collision WarningMalfunction Displayed when there is a system malfunctionwith the collision warning system. The systemwill be disabled. Contact your authorizeddealer as soon as possible. Collision WarningDisplay Fault Displayed when there is a s...

Tire Messages Action / Description Low Tire Pressure Displays when one or more tires on yourvehicle have low tire pressure. Tire Pressure MonitorFault Displays when the tire pressure monitoringsystem is malfunctioning. If the warning stayson or continues to come on, contact yourauthorized dealer. Ti...

GENERAL AUDIO INFORMATION Radio Frequencies and Reception Factors AM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Canadian Radio and TelecommunicationsCommission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.9–107.7, 107.9 MHz Radio rec...

Always handle discs by their edges only. Clean the disc with an approvedCD cleaner only, wiping from the center of the disc toward the edge. Donot clean in a circular motion. Do not expose discs to direct sunlight or heat sources for extendedperiods of time. MP3 Track and Folder Structure Audio syst...

MyFord 姞 SYSTEM WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that you use extreme caution when using any device or feature that may takeyour focus off the road. Your primary responsibility is the safe operationof the vehicle. ...

Menu Structure Note: Depending on your system, some options may appear slightly different, not at all or on-screen and able to be selected using thefunction buttons. Press MENU. Press the up and down arrow buttons to scroll through the options (ifactive). Press the right arrow to enter a menu. Press...

AM/FM/CD SONY 姞 AUDIO SYSTEM WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that you use extreme caution when using any device or feature that may takeyour focus off the road. Your primary responsibility is the safe operationof ...

A. Eject: Eject a CD. B. CD Slot: Insert a CD. C. TUNE +/TUNE - : • In radio mode, you can search the frequency band in individualincrements. • In SIRIUS mode, you can find the next or previous available SIRIUSsatellite station. D. Power and Volume: Press the power control to turn the system on and ...

SATELLITE RADIO INFORMATION (IF EQUIPPED) Satellite Radio Channels SIRIUS 威 broadcasts a variety of music, news, sports, weather, traffic and entertainment satellite radio channels. For more information and acomplete list of SIRIUS 威 satellite radio channels, visit www.siriusxm.com in the United Sta...

MANUAL HEATING AND AIR CONDITIONING SYSTEM A. Power: Press the button to turn the system on and off. When the system is off, outside air is prevented from entering the vehicle. B. Air distribution control: Press to set the air distribution to a position listed below: Distributes air through the wind...

D. Recirculated air: Press the button to switch between outside air and recirculated air. When the LED on the button is lit, the air currently inthe passenger compartment is being recirculated. Using recirculated aircan reduce the time needed to cool the interior and reduce unwantedodors from enteri...

E. A/C: Press the button to turn air conditioning on or off. Air conditioning cools the vehicle using outside air. To improve airconditioning when starting your vehicle, drive with the windows slightlyopen for two to three minutes.Use A/C with recirculated air to improve cooling performance andeffic...

DUAL AUTOMATIC TEMPERATURE CONTROL SYSTEM (WITH MyTemp) Note: You can switch temperature units between Fahrenheit and Celsius. Refer to Menu features in the MyFord Touch or MyLincoln Touch chapter. A. MyTemp: Allows you to quickly adjust to a frequently used setting with a single touch.Press + and -...

starting your vehicle, drive with the windows slightly open for two to threeminutes.Use A/C with recirculated air to improve cooling performance andefficiency. Note: A/C turns on automatically in MAX A/C, Defrost and Floor/Defrost. G. AUTO: Press the button to turn on fully automatic operation. Sele...

GENERAL OPERATING TIPS Manual Heating and Air Conditioning System • To reduce fog build-up on the windshield during humid weather, selectDefrost. Temperature and/or fan speed can also be increased toimprove clearing. • To reduce humidity build-up inside the vehicle, do not drive with thesystem off o...

Dual Zone Automatic Temperature Control • To reduce fog build-up on the windshield during humid weather, selectDefrost. Temperature and/or fan speed can also be increased toimprove clearing. • To reduce humidity build-up inside the vehicle, do not drive with thesystem off or with recirculated air en...

HEATED REAR WINDOW Note: The ignition must be on to use this feature. Press the control to clear the rear window of thin ice and fog. Press thecontrol again within 10 minutes to switch it off. It turns off automaticallyafter 10 minutes, or when you switch the ignition off. Do not use razor blades or...

REMOTE START CLIMATE OPERATION (IF EQUIPPED) The climate control system adjusts the cabin temperature during remotestart. You cannot adjust the system during remote start operation. Turn theignition on to return the system to its previous settings. You can nowmake adjustments. You will need to turn ...

SITTING IN THE CORRECT POSITION WARNING: Sitting improperly out of position or with the seatback reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system,resulting in serious injury or death in a crash. Always sit upright againstyour seatback...

To reinstall the non-adjustable head restraint, do the following: • Remove: Pull up the head restraint until it reaches the highest adjustment position and then press and hold the guide sleeveunlock/remove buttons, then pull up on the head restraint. • Reinstall: Align the steel stems into the guide...

MANUAL SEATS Moving the seats backwards andforwards WARNING: Do not adjust the driver’s seat or seatback while the vehicle is moving. WARNING: Rock the seat backwards and forwards after releasing the lever to make sure that it is fully engaged. Recline adjustment WARNING: Before returning the seatba...

MEMORY FUNCTION (IF EQUIPPED) This memory control, located on thedriver’s door, allows automaticpositioning of the driver seat andpower mirrors to two programmablepositions. You may also have thisfeature for the steering column andpower adjustable foot pedals. Programming a memory position Note: A m...

If the engine falls below 350 rpm while the cooled seats are on, thefeature will turn itself off and will need to be reactivated. Note: When the heated/cooled front seat is active, you will be able to hear the fan operating inside the seat. This is normal. Heated and Cooled Seat Air Filter Replaceme...

Power fold and tumble seat WARNING: Ensure that the seat is unoccupied when folding it down. Folding the seat while occupied could result in occupant injury or damage to the seat. This feature is available for the right-hand seat on seven-passengervehicles and on both sides for six-passenger vehicle...

Unstowing the third row seat WARNING: Ensure the seat is latched to vehicle floor by pushing and pulling on the seat. If not latched, the seat may cause injury during a sudden stop. Note: Ensure that there are no objects such as books, purses or brief cases on the load floor before unstowing the sea...

Note: Ensure that there are no objects such as books, purses or brief cases on the load floor before unstowing the seat. Failure to remove allobjects from the top of the load floor prior to unstowing it may causedamage to the seat. Note: In order to allow the seat to complete the stowed position, do...

HOMELINK 姞 WIRELESS CONTROL SYSTEM (IF EQUIPPED) WARNING: Make sure that the garage door and security device are free from obstruction when you are programming. Do not program the system with the vehicle in the garage. WARNING: Do not use the system with any garage door opener that does not have the...

Programming Note: Put a new battery in the hand-held transmitter. This will ensure quicker training and accurate transmission of the radio-frequency signal. 1. Switch the ignition on. 2. Hold the garage door hand-heldtransmitter 1–3 in. (2–8 cm) awayfrom the button on the sun visoryou want to progra...

2. Return to your car. 3. Press and hold the functionbutton you want to program for2 seconds, then release. Repeat thisstep. Depending on the brand ofgarage door opener you may needto repeat this sequence a third time. To program additional buttons repeat steps one through four. For questions or com...

Programming HomeLink 姞 to a Genie Intellicode 姞 2 garage door opener Note: The Genie Intellicode 威 2 transmitter must already be programmed to operate with the garage door opener. Programing the transmitters To program HomeLink 威 to the transmitter you must first put the transmitter into programming...

Programming HomeLink 姞 to the Genie Intellicode 姞 garage door opener motor Note: You may need a ladder to access the garage door opener motor. To program HomeLink 威 to the garage door opener motor.1. Press and hold the PROGRAMbutton on the Garage door openermotor until both blue LED’s turn on.2. Rel...

AUXILIARY POWER POINTS WARNING: Do not plug optional electrical accessories into the cigarette lighter socket (if equipped). Improper use of the lighter can cause damage not covered by your warranty, and can result in fireor serious injury. Note: Do not insert objects other than an accessory plug in...

CENTER CONSOLE WARNING: Use only soft cups in the cupholder. Hard objects can injure you in a collision. Your vehicle may be equipped with a variety of console features. Theseinclude: A. Cupholders B. Utility compartment with audioinput jack, USB port, powerpointand SD card reader C. Storage drawer ...

Console Refrigerator and Freezer (if equipped) This feature will operate when the vehicle is on or in accessory mode.Limit the time of use when the vehicle is in accessory mode to avoiddraining the vehicle’s battery. Ford recommends only using this featurewhen the engine is running. Flip the console...

Cleaning and Maintenance Note: Condensation on the inside walls of the refrigerator is normal under certain conditions. This feature is maintenance free, but you can clean the inside of the unitand the cover with a mild soap and water solution when needed. OVERHEAD CONSOLE The appearance of the over...

WARNING: Switching off the engine when the vehicle is still moving will result in a loss of brake and steering assistance. The steering will not be locked, but higher effort will be required. When theignition is switched off, some electrical circuits, warning lamps andindicators may also be off. The...

If you have difficulty starting the engine when the temperature is below-13 o F (-25 o C), press the accelerator pedal slightly and try again. If the engine does not start after three attempts, wait 10 seconds andfollow this flooded engine procedure. 1. Select park or neutral. 2. Fully press the acc...

The heater acts as a starting aid by warming the engine coolant. Thisallows the climate control system to respond quickly. The equipmentincludes a heater element (installed in the engine block) and a wireharness. You can connect the system to a grounded 120 volt A/Celectrical source. We recommend th...

SAFETY PRECAUTIONS WARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler door (Easy Fuel 威 “no cap” fuel system), do not refuel unt...

• Avoid getting fuel liquid in your eyes. If fuel is splashed in the eyes,remove contact lenses (if worn), flush with water for 15 minutes andseek medical attention. Failure to seek proper medical attention couldlead to permanent injury. • Fuels can also be harmful if absorbed through the skin. If f...

Do not be concerned if your enginesometimes knocks lightly. However,if it knocks heavily while you areusing fuel with the recommendedoctane rating, see your authorized dealer to prevent any engine damage. RUNNING OUT OF FUEL Avoid running out of fuel because this situation may have an adverseeffect ...

When filling the vehicle’s fuel tank from a portable fuel container, use thefunnel included with the vehicle. 1. Locate the white plastic funnel in the spare tirecompartment. 2. Slowly insert the funnel into the capless fuelsystem. 3. Fill the vehicle with fuel from the portable fuelcontainer. 4. Wh...

EMISSION CONTROL SYSTEM WARNING: Do not park, idle, or drive your vehicle in dry grass or other dry ground cover. The emission system heats up the engine compartment and exhaust system, which can start a fire. WARNING: Exhaust leaks may result in entry of harmful and potentially lethal fumes into th...

AUTOMATIC TRANSMISSION WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn the ignition to the off position and remove the key whenever you leave your vehicle. Your vehicle has been designed to improve fuel economy by reducingfuel usage while coasting...

D (Drive) with Overdrive The normal driving position for the best fuel economy. Transmissionoperates in gears one through six. D (Drive) with Grade Assist (if equipped) Press the transmission controlswitch on the side of the gearshiftlever to activate grade assist. Grade assist: • Improves driving e...

L (Low) • Provides maximum engine braking • Will downshift to the lowest available gear for the current vehiclespeed; allows for first gear when vehicle reaches lower speeds • Is not intended for use under extended or normal driving conditionsand results in lower fuel economy. S (Sport) Moving the g...

Paddle Shifters (if equipped) The paddle shifters allow you to shift gears quickly, without taking yourhands off the steering wheel. Temporary manual control is providedwhen pulling the paddles with the gearshift in the D (Drive) position.The system will determine when temporary manual control is no...

Automatic transmission adaptive learning This feature is designed to increase durability and provide consistentshift feel over the life of the vehicle. A new vehicle or transmission mayhave firm and/or soft shifts. This operation is considered normal and willnot affect function or durability of the ...

If the fuse is not blown and the brake lamps are working properly, thefollowing procedure will allow you to move the gearshift lever from P(Park): 1. Apply the parking brake, turn theignition off, and remove the key. 2. Using a screwdriver (or similartool), carefully pry off and removethe chrome tri...

GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may beworn-out and should be inspected by an authorized dealer. If the vehiclehas continuous vibration or shudder in the steering wheel while ...

PRINCIPLES OF OPERATION The traction control system helps avoid drive wheel spin and loss oftraction. If your vehicle begins to slide, the system applies the brakes to individualwheels and, when needed, reduces engine power at the same time. If thewheels spin when accelerating on slippery or loose s...

PRINCIPLES OF OPERATION WARNING: Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction and/or wheel/tire size may change the handlingcharacteristics of the vehicle and may adversely affect the performanceof the AdvanceTrac 威 system. In...

SENSING SYSTEM (IF EQUIPPED) WARNING: To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed)objects when moving in reverse on a flat surface at parking speeds.Traffic control sy...

The system can be turned off using the information display control.Refer to the Information Display chapter. If a fault is present in the system, a warning message appears in the information display and doesnot allow the driver to switch the faulted system on. Note: If your vehicle is equipped with ...

Using Active Park Assist Press the button; the touch screendisplays a message and acorresponding graphic to indicateit’s searching for a parking space.Use the turn signal to indicatewhich side of the vehicle you wantthe system to search on. Note: If the turn signal is not on, the system automaticall...

Automatic Steering into Parking Space Note: If vehicle speed exceeds 7 mph (12 km/h), the system turns off and you need to take full control of the vehicle. Note: If a maneuver is interrupted before completion, the system turns off. The steering wheel position will not indicate the actual position o...

The system does not position the vehicle where I want in the space The vehicle is rolling in the opposite direction of the transmission (i.e.rolling forward when R [Reverse] is selected) The transmission is in R (Reverse); the vehicle must be moving forward todetect a parking space An irregular curb...

WARNING: Use caution when turning camera features on or off while in R (Reverse). Make sure the vehicle is not moving. The rear view camera systemprovides a video image of the areabehind the vehicle. During operation, lines appear inthe display which represent yourvehicle’s path and proximity toobje...

Note: The camera may not operate correctly under the following conditions: • Nighttime or dark areas if one or both reverse lamps are not operating. • The camera’s view is obstructed by mud, water or debris. Clean the lenswith a soft, lint-free cloth and non-abrasive cleaner. • The rear of the vehic...

Always use caution while reversing. Objects in the red zone are closestto your vehicle and objects in the green zone are further away. Objectsare getting closer to your vehicle as they move from the green zone tothe yellow or red zones. Use the side view mirrors and rear view mirrorto get better cov...

Rear Camera Delay When shifting the transmission out of R (Reverse) and into any gearother than P (Park), the camera image remains in the display until thevehicle speed reaches 6 mph (10 km/h). This occurs when the rearcamera delay feature is on, or until a radio button is selected. Selectable setti...

PRINCIPLES OF OPERATION Cruise control lets you maintain a set speed without keeping your footon the accelerator pedal. USING CRUISE CONTROL WARNING: Do not use cruise control in heavy traffic or on roads that are winding, slippery or unpaved. Note: Vehicle speed may vary momentarily when driving up...

The system is designed to automatically adjust your speed to maintain aproper distance between you and the vehicle in front of you in the samelane. The driver can select from one of four GAP settings, the controlsare located on the steering wheel. At startup, the system sets the gap to the last sele...

Following a Vehicle WARNING: When following a vehicle in front of you, the vehicle will not decelerate automatically to a stop, nor will the vehicle always decelerate quickly enough to avoid a collision without driverintervention. Always apply the brakes when necessary. Failing to do somay result in...

Detection Issues The radar sensor has a limited field of vision. It may not detect vehicles atall or detect a vehicle later than expected in some situations. The leadvehicle graphic will not illuminate if a vehicle is not detected in front of you. Detection issues can occur: A. When driving on a dif...

Blocked Sensor WARNING: Do not use ACC when towing a trailer with brake controls. Aftermarket trailer brakes will not function properly when ACC is activated because the brakes are electronically controlled.Failing to do so may result in loss of vehicle control, which could resultin serious injury. ...

Cause Action Swirling water, or snow or ice onthe surface of the road mayinterfere with the radar signals Do not use ACC in these conditionbecause it may not detect, warn,or respond to potential collisions. Desert / remote area with no othervehicles and no roadside objects Wait a short time or switc...

BLIND SPOT INFORMATION SYSTEM (BLIS 姞 ) WITH CROSS TRAFFIC ALERT (CTA) (IF EQUIPPED) WARNING: To help avoid injuries, NEVER use the BLIS 威 as a replacement for using the interior and exterior mirrors and looking over your shoulder before changing lanes. BLIS 威 is not a replacement for careful drivin...

Using the Systems BLIS 威 turns on when the engine is started and the vehicle is driven forward above 3 mph (5 km/h); it remains on while the transmission is inD (Drive) and N (Neutral). If shifted out of D (Drive) or N (Neutral),the system enters CTA mode. Once shifted back into D (Drive), BLIS 威 tu...

Zone coverage also decreases when parking at shallow angles. Here, theleft sensor is mostly obstructed; zone coverage on that side is severelylimited. System Lights and Messages The BLIS 威 and CTA systems illuminate a yellow alert indicator inthe outside mirror on the side ofthe vehicle the approach...

Switching the Systems Off and On One or both systems can be switched off temporarily by using theinformation display control; refer to the Information Display chapter. When the BLIS 威 is switched off, the driver does not receive alerts and the information display shows BLIND SPOT SYS OFF and/or CTAS...

If it is, a red warning lightilluminates and an audible warningchime sounds. The brake support system assists the driver in reducing the collisionspeed by charging the brakes. If the risk of collision further increasesafter the warning light illuminates, the brake support prepares the brakesystem fo...

System Limitations WARNING: The collision warning system’s brake support can only help reduce the speed at which a collision occurs if the driver applies the vehicle’s brakes. The brake pedal must be pressedjust like any typical braking situation. Due to the nature of radar technology, there may be ...

Steering Tips If the steering wanders or pulls, check for: • an improperly inflated tire • uneven tire wear • loose or worn suspension components • loose or worn steering components • improper vehicle alignment A high crown in the road or high crosswinds may also make the steeringseem to wander/pull...

CARGO NET (IF EQUIPPED) WARNING: The cargo net is not designed to restrain objects during a collision or heavy braking. The cargo net secures lightweightobjects in the cargo area. Attach thenet to the anchors provided. Do notput more than 50 lb (22 kg) in thenet. Load Carrying 247 2013 Flex (471) Ow...

Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Label on the B-Pillar or the edge of the driver’s door(vehicles exported outside the US and Canada may not have a TireLabel). Look for “THE COMBINED WEI...

Example only: Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue loadweight is also part of cargo weight. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb wei...

GAWR (Gross Axle Weight Rating) – is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Safety Compliance Certification Label.The label shall be affixed to either the door hinge pillar,door-latch post, or the door edge that meets the doo...

• Example only: WARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structuraldamage, serious damage to the vehicle, loss of control and personalinjury. 252 Load Carrying 20...

GCW (Gross Combined Weight) – is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer. GCWR (Gross Combined Weight Rating) – is the maximum allowable weight of the vehicle and the loaded trailer – including all cargo andpassengers – that the vehicle can handle without r...

Steps for determining the correct load limit: 1. Locate the statement “The combined weight of occupants and cargoshould never exceed XXX kg or XXX lbs.” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that willbe riding in your vehicle. 3. Subtract the combin...

TOWING A TRAILER WARNING: Do not exceed the GVWR or the GAWR specified on the certification label. WARNING: Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of the vehicle and could result in engine damage, transmission damage, structural damage, lossof vehicle c...

TRAILER SWAY CONTROL (IF EQUIPPED) Note: This feature does not prevent trailer sway, but reduces it once it begins. Note: This feature cannot stop all trailers from swaying. Note: In some cases, if vehicle speed is too high, the system may activate multiple times, gradually reducing vehicle speed. T...

Hitches Do not use hitches that clamp onto the vehicle bumper. Use aload-carrying hitch. You must distribute the load in your trailer so that 10–15% of the totalweight of the trailer is on the tongue. Do not to exceed the maximumtongue load of 500 pounds (227 kilograms) on a Class III receiver. Weig...

Trailer Brakes WARNING: Do not connect a trailer’s hydraulic brake system directly to your vehicle’s brake system. Your vehicle may not have enough braking power and your chances of having a collision greatlyincrease. Electric brakes and manual, automatic or surge-type trailer brakes aresafe if inst...

Trailer Lamps Trailer lamps are required on most towed vehicles. Make sure all runninglights, brake lights, turn signals and hazard lights are working. Contactyour authorized dealer or trailer rental agency for proper instructionsand equipment for hooking up the lamps. Before Towing a Trailer Practi...

Launching or Retrieving a Boat or Personal Water Craft (PWC) Note: Disconnect the wiring to the trailer before backing the trailer into the water. Note: Reconnect the wiring to the trailer after the trailer is removed from the water. When backing down a ramp during boat launching or retrieval:1. Do ...

WRECKER TOWING If you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, yourroadside assistance service provider.It is recommended that your vehicle be towed with a wheel lift anddollies or flatbed equipment. Do not tow wi...

TOWING THE VEHICLE ON FOUR WHEELS Emergency Towing In the event your vehicle becomes disabled (without access to wheeldollies, car-hauling trailer, or flatbed transport vehicle), it can beflat-towed (all wheels on the ground, regardless of thepowertrain/transmission configuration) under the followin...

BREAKING-IN You need to break in new tires for approximately 300 miles(480 kilometers). During this time, your vehicle may exhibit some uniquedriving characteristics. Avoid driving too fast during the first 1000 miles(1600 kilometers). Vary your speed frequently and change up throughthe gears early....

• Carry unnecessary weight (approximately 1 mpg [0.4 km/L] is lost forevery 400 lb [180 kg] of weight carried). • Add particular accessories to your vehicle (e.g. bug deflectors,rollbars/light bars, running boards, ski racks). • Drive with the wheels out of alignment. DRIVING THROUGH WATER WARNING: ...

FLOOR MATS WARNING: Always use floor mats that are designed to fit the foot well of your vehicle. Only use floor mats that leave the pedal area unobstructed. Only use floor mats that are firmly secured toretention posts so that they cannot slip out of position and interferewith the pedals or impair ...

WARNING (Continued) • Failure to properly follow floor mat installation or attachmentinstructions can potentially cause interference with pedal operationcausing loss of control of vehicle. • To install floor mats, position the floor mat so that the eyelet is overthe retention post and press down to ...

ROADSIDE ASSISTANCE Vehicles sold in the U.S. : Getting roadside assistance To fully assist you should you have a vehicle concern, Ford Motor Companyoffers a complimentary roadside assistance program. This program isseparate from the New Vehicle Limited Warranty. The service is available: • 24-hours...

If you need to arrange roadside assistance for yourself, Ford MotorCompany will reimburse a reasonable amount for towing to the nearestdealership within 35 miles (56 km). To obtain reimbursementinformation, U.S. Ford vehicle customers call 1-800-241-3673. Customerswill be asked to submit their origi...

Connecting the Jumper Cables WARNING: Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery. Note: Do not attach the negative (-) cable to fuel lines, engine rocker covers, the intake...

Removing the Jumper Cables Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. Remove the jumper cables in the reverse order that they wereconnected. 1. Remove the jumper cable fromthe ground metal surface. 2. Remove the jumper cable on thenega...

GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorizeddealer. While any authorized dealer handling your vehicle line willprovide warranty service, we recommend you return to your sellingauthorized dealer who wants to ensure your continued satisfaction. Plea...

• Ford Genuine Accessories • Service specials and promotions. In Canada: Mailing address Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E4 Telephone 1-800-565-3673 (FORD) Online www.ford.ca Additional assistance If you have questions or concerns,...

UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY) For vehicles delivered to authorized Canadian dealers. In those caseswhere you continue to feel that the efforts by Ford of Canada and theauthorized dealer to resolve a factory-related vehicle service concernhave been unsatisfactory, Ford of C...

CHANGING A FUSE Fuses If electrical components in the vehicleare not working, a fuse may haveblown. Blown fuses are identified by abroken wire within the fuse. Checkthe appropriate fuses before replacingany electrical components. Note: Always replace a fuse with one that has the specified amperage r...

FUSE SPECIFICATION CHART Power Distribution Box WARNING: Always disconnect the battery before servicing high current fuses. WARNING: To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs. The power dis...

Passenger Compartment Fuse Panel The fuse panel is located under the instrument panel to the left of thesteering wheel. The fuses are coded as follows: Fuse/Relay Number Fuse Amp Rating Protected Components 1 30A Driver side front window 2 15A Memory seat, Second row seats 3 30A Not used (spare) 4 1...

GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthinessand resale value. There is a large network of Ford authorized dealersthat are there to help you with their professional servicing expertise. Webelieve that their specially trained technicians are best qualifi...

OPENING AND CLOSING THE HOOD 1. Inside the vehicle, pull the hoodrelease handle located under thebottom of the instrument panel nearthe steering column. 2. Go to the front of the vehicle andrelease the auxiliary latch that islocated under the front center ofthe hood. 3. Lift the hood. PUSH ON OFF Ma...

UNDER HOOD OVERVIEW 3.5L V6 engine A. Engine coolant reservoir B. Windshield washer fluid reservoir C. Brake fluid reservoir D. Battery E. Power distribution box F. Air filter assembly G. Automatic transmission fluid dipstick H. Engine oil dipstick I. Engine oil filler cap A I H G F B C D E 294 Main...

3.5L V6 EcoBoost 姞 Engine A. Engine coolant reservoir B. Brake fluid reservoir C. Battery D. Power distribution box E. Air filter assembly F. Automatic transmission fluid dipstick (out of view) G. Engine oil dipstick H. Engine oil filler cap I. Windshield washer fluid reservoir A B C D E F G H I Mai...

Engine shield Some vehicles may be equipped with an aero-shield under the engine.This shield needs to be removed for service, including oil and filterchanges. It is secured with four quick release fasteners. ENGINE OIL DIPSTICK A. – MIN B. – MAX ENGINE OIL CHECK Note: Check the level before starting...

Adding engine oil Note: Do not remove the filler cap when the engine is running. Note: Do not add engine oil further than the MAX mark. Oil levels above the MAX mark may cause engine damage. Only use oils certified for gasoline engines by theAmerican Petroleum Institute (API). An oil with thistradem...

Adding Engine Coolant WARNING: Do not add engine coolant when the engine is hot. Steam and scalding liquids released from a hot cooling system can burn you badly. Also, you can be burned if you spill coolant on hotengine parts. WARNING: Do not put engine coolant in the windshield washer fluid contai...

• Do not use alcohol, methanol, brine or any engine coolants mixed withalcohol or methanol antifreeze (coolant). Alcohol and other liquids cancause engine damage from overheating or freezing. • Do not add extra inhibitors or additives to the coolant. These can beharmful and compromise the corrosion ...

Engine fluid temperature management (EcoBoost engine only) WARNING: To reduce the risk of collision and injury, be prepared that the vehicle speed may reduce and the vehicle may not be able to accelerate with full power until the fluid temperaturesreduce. Your vehicle has been designed to pull a tra...

WARNING: Never remove the coolant reservoir cap while the engine is running or hot. 4. If the coolant level is normal, you may restart your engine andcontinue on. 5. If the coolant is low, add coolant, restart the engine and take yourvehicle to an authorized dealer. See Adding engine coolant in this...

When fail-safe mode is activated WARNING: Fail-safe mode is for use during emergencies only. Operate the vehicle in fail-safe mode only as long as necessary to bring the vehicle to rest in a safe location and seek immediate repairs.When in fail-safe mode, the vehicle will have limited power, will no...

TRANSMISSION FLUID CHECK 6F50/6F55 Transmission WARNING: The dipstick cap and surrounding components may be hot; gloves are recommended. WARNING: Use gloves when moving the air filter assembly; components will be hot. Note: Automatic transmission fluid expands when warmed. To obtain an accurate flui...

7. Without disconnecting the sensor (4), pull the air filter assembly up todisconnect the air filter assembly from the seated grommets locatedunderneath the air filter assembly. 8. Rotate the air filter assembly 90degrees counterclockwise andreinstall into the rubber hose. 9. Tighten the clamp (1). ...

4. Seat the air filter assembly back into the grommets by pushing downon the air filter assembly. 5. Tighten the clamp. 6. Install and tighten two bolts that attach air filter assembly to the frontof the vehicle. 7. Install the bolt cover (if equipped). 8. Reinstall the harness retaining clip into t...

Washer fluids containing non-methanol antifreeze agents should be usedonly if they provide cold weather protection without damaging thevehicle’s paint finish, wiper blades or washer system. CHANGING THE VEHICLE BATTERY WARNING: Batteries normally produce explosive gases which can cause personal inju...

If you see any corrosion on the battery or terminals, remove the cablesfrom the terminals and clean with a wire brush. You can neutralize theacid with a solution of baking soda and water. It is recommended that the negative battery cable terminal bedisconnected from the battery if you plan to store ...

CHECKING THE WIPER BLADES Run the tip of your fingers over the edge of the bladeto check for roughness. Clean the wiper blades with washer fluid or waterapplied with a soft sponge or cloth. CHANGING THE WIPER BLADES 1. Pull the wiper arm away from thevehicle. Turn the blade at an anglefrom the wiper...

3. The wiper arm has a snapretention feature to receive a crosspin from the wiper blade structure.Grip tightly and press on thearm/blade joint from beneath andseparate the blade from the arm. Avoid rotating the wiper blade structure and trapping your left handbetween the arm and blade. 4. Attach the...

Changing the air filter element 3.5L V6 engine 3.5L V6 EcoBoost 威 engine 1. On the passenger’s side of the air filter housing, release the twoclamps from the air filter housing cover. 2. Lift the passenger’s side of the cover and pushthe cover toward the passenger’s side. Release thethree tabs on th...

4. Locate the vertical adjuster oneach headlamp. Using a Phillips #2screwdriver, turn the adjuster eitherclockwise or counterclockwise inorder to adjust the vertical aim ofthe headlamp. The horizontal edgeof the brighter light should touchthe horizontal reference line. 5. Close the hood and turn off...

Replacing headlamp bulbs WARNING: Handle a halogen headlamp bulb carefully and keep out of children’s reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause thebulb to break the next time the headlamps are operated. Note: If the bulb is accident...

Replacing rear stop/tail/turn/backup and side marker lamp bulbs The stop/tail/turn/backup and side marker lamp bulbs are located in thetail lamp assembly. Note: Your vehicle may be equipped with a stop/tail/turn and side marker lamp assemblies containing integral multiple light emitting diodes(LED)....

WAXING • Wash the vehicle first. • Use a quality wax that does not contain abrasives. • Do not allow paint sealant to come in contact with any non-body(low-gloss black) colored trim, such as grained door handles, roofracks, bumpers, side moldings, mirror housings or the windshield cowlarea. The pain...

If a staining liquid like coffee/juice has been spilled on the instrumentpanel or on interior trim surfaces, clean as follows: 1. Wipe up spilled liquid using a clean, white, cotton cloth. 2. Wipe the surface with a damp, clean, white cotton cloth. For morethorough cleaning, use a mild soap and wate...

• Never apply any cleaning chemical to hot or warm wheel rims orcovers. • Some automatic car washes may cause damage to the finish on yourwheel rims or covers. Industrial-strength (heavy-duty) cleaners, orcleaning chemicals, in combination with brush agitation to removebrake dust and dirt, could wea...

Miscellaneous • Make sure all linkages, cables, levers and pins under vehicle arecovered with grease to prevent rust. • Move vehicles at least 25 feet (8 meters) every 15 days to lubricateworking parts and prevent corrosion. Removing Vehicle from Storage When your vehicle is ready to come out of sto...

GENERAL INFORMATION Notice to Crossover Vehicle Owners Crossover vehicles handle differentlythan passenger cars in the variousdriving conditions that areencountered on streets, highways andoff-road. Crossover vehicles are notdesigned for cornering at speeds ashigh as passenger cars any more thanlow-...

normal on-road driving conditions. Operating your vehicle under otherthan those conditions could subject the vehicle to excessive stress whichmight result in damage which is not covered under your warranty. With the AWD option, power will be delivered to the front wheels anddistributed to the rear w...

TIRE CARE Information About Uniform Tire Quality Grading Tire Quality Grades apply to newpneumatic passenger car tires. TheQuality grades can be found whereapplicable on the tire sidewall betweentread shoulder and maximum sectionwidth. For example: • Treadwear 200 Traction AA Temperature A These Tir...

Traction AA A B C WARNING: The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning or peak traction characteristics. The traction grades, from highest to lowest are AA, A, B, and C. Thegrades represent the...

INFORMATION CONTAINED ON THE TIRE SIDEWALL Both U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the sidewall of all tires. Thisinformation identifies and describes the fundamental characteristics ofthe tire and also provides a U.S. DOT Tire Identifi...

E. 15: Indicates the wheel or rim diameter in inches. If you change your wheel size, you will have to purchase new tires to match the new wheeldiameter. F. 95: Indicates the tire’s load index. It is an index that relates to how much weight a tire can carry. You may find this information in yourowner...

Information on “T” Type Tires “T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below: T145/80D16 is an example of a tiresize. Note: The temporary tire size for your vehicle may be different fromthis example. Tire Quality Gradesdo not apply ...

INFLATING YOUR TIRES Safe operation of your vehicle requires that your tires are properlyinflated. Remember that a tire can lose up to half of its air pressurewithout appearing flat. Every day before you drive, check your tires. If one looks lower than theothers, use a tire gauge to check pressure o...

Damage Periodically inspect the tire treads and sidewalls for damage (such asbulges in the tread or sidewalls, cracks in the tread groove andseparation in the tread or sidewall). If damage is observed or suspectedhave the tire inspected by a tire professional. Tires can be damagedduring off-road use...

Tire Replacement Requirements WARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus LT-metric or all-season versus all-terrain) as those originallyprovided by Ford. The recommended tire and wheel size may be found oneither t...

Important: Remember to replace the wheel valve stems when the road tires are replaced on your vehicle. It is recommended that the two front tires or two rear tires generally bereplaced as a pair. The tire pressure sensors mounted in the wheels (originally installed onyour vehicle) are not designed t...

Tire and Wheel Alignment A bad jolt from hitting a curb or pothole can cause the front end of yourvehicle to become misaligned or cause damage to your tires. If yourvehicle seems to pull to one side when you’re driving, the wheels may beout of alignment. Have an authorized dealer check the wheel ali...

USING SNOW CHAINS WARNING: Snow tires must be the same size, load index, speed rating as those originally provided by Ford. Use of any tire or wheel not recommended by Ford can affect the safety and performanceof your vehicle, which could result in an increased risk of loss of vehiclecontrol, vehicl...

TIRE PRESSURE MONITORING SYSTEM WARNING: The tire pressure monitoring system is NOT a substitute for manually checking tire pressure. The tire pressure should be checked periodically (at least monthly) using a tire gauge,see Inflating your tires in this chapter. Failure to properly maintain your tir...

telltale after replacing one or more tires or wheels on your vehicle toensure that the replacement or alternate tires and wheels allow theTPMS to continue to function properly. The tire pressure monitoring system complies with part 15 of the FCCrules and with RSS-210 of Industry Canada. Operation is...

To restore the full functionality of the tire pressure monitoring system,have the damaged road wheel/tire repaired and remounted on yourvehicle. For additional information, refer to Changing tires with a TPMS in this section. When You Believe Your System Is Not Operating Properly The main function o...

Low tirepressurewarning light Possible cause Customer action required Flashingwarning light Spare tire in use Repair the damaged road wheel/tire and reinstall it on the vehicle torestore system functionality. For adescription on how the systemfunctions, refer to When your temporary spare tire is ins...

CHANGING A ROAD WHEEL WARNING: The use of tire sealants may damage your tire pressure monitoring system (TPMS) and should not be used. However, if you must use a sealant, the TPMS sensor and valve stem onthe wheel must be replaced by an authorized Ford dealer. WARNING: Refer to Tire pressure monitor...

• Wet weather driving capability • All-Wheel driving capability (if applicable) • Load leveling adjustment (if applicable) When driving with the full-size dissimilar spare tire/wheel additionalcaution should be given to: • Towing a trailer • Driving vehicles equipped with a camper body • Driving veh...

8. Remove wheel cover (if equipped) with the lug wrench tip and looseneach wheel lug nut one-half turn counterclockwise but do not removethem until the wheel is raised off the ground. 9. The vehicle jacking points are shown here, and are depicted on theyellow warning label on the jack. Jack at the s...

TECHNICAL SPECIFICATIONS Wheel Lug Nut Torque Specifications WARNING: When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum orbrake disc that contacts the wheel. Ensure that any fast...

ENGINE SPECIFICATIONS Engine 3.5L V6 engine 3.5L V6 EcoBoost engine Cubic inches 214 214 Fuel See Octane recommendations in the Fuel and Refueling chapter. See Octane recommendations in the Fuel and Refueling chapter. Firing order 1–4–2–5–3–6 1–4–2–5–3–6 Spark plug gap 0.049-0.053 inch (1.25-1.35 mm...

VEHICLE IDENTIFICATION NUMBER The vehicle identification number islocated on the driver sideinstrument panel. Please note that in the graphic,XXXX is representative of yourvehicle identification number. The Vehicle Identification Number (VIN) contains the followinginformation: A. World manufacturer ...

ACCESSORIES For a complete listing of the accessories that are available for yourvehicle, please contact your dealer or visit our online store at: Accessories.Ford.com (U.S. only). Ford Custom Accessories are available for your vehicle through yourlocal Ford or Ford of Canada dealer. Ford Motor Comp...

Peace of mind • Remote start • Wheel locks • Locking fuel plug for capless fuel systems • Vehicle security • Full vehicle covers • Bumper and hitch mounted parking sensors* *Ford Licensed Accessories (FLA) are warranted by the accessorymanufacturer’s warranty. Ford Licensed Accessories are fully des...

FORD ESP EXTENDED SERVICE PLANS (U.S. ONLY) More than 32 million Ford and Lincoln owners have discovered thepowerful protection of Ford ESP. It is the only extended service planbacked by Ford Motor Company, and provides “peace of mind”protection beyond the New Vehicle Limited Warranty coverage. Up t...

FORD ESP EXTENDED SERVICE PLANS (CANADA ONLY) You can get more protection for your vehicle by purchasing a FordExtended Service Plan (ESP). Ford ESP is the only service contractbacked by Ford Motor Company of Canada, Limited. Depending on theplan you purchase, Ford ESP provides benefits such as: • R...

GENERAL MAINTENANCE INFORMATION Why Maintain Your Vehicle? Carefully following the maintenance schedule helps protect against majorrepair expenses resulting from neglect or inadequate maintenance andmay also help to increase the value of your vehicle when you sell ortrade it. Keep all receipts for c...

They can perform any services that are required on your vehicle, fromgeneral maintenance to collision repairs. Note: Not all dealers have extended hours or bodyshops. Please contact your dealer for details. Protecting Your Investment Maintenance is an investment that will pay dividends in the form o...

Additives and Chemicals Ford Motor Company recommended additives and chemicals are listed inthis book and in the Workshop Manual. Additional chemicals or additives not approved by Ford Motor Company and are notrecommended as part of normal maintenance. Please consult your Warranty Manual for complet...

NORMAL SCHEDULED MAINTENANCE AND LOG Intelligent Oil Life Monitor 姞 Your vehicle is equipped with an Intelligent Oil Life Monitor 威 that determines when the engine oil should be changed based on how yourvehicle is used. By using several important factors in its calculations, themonitor helps reduce ...

Normal Scheduled Maintenance * At every oil changeinterval as indicated bythe message center Change engine oil and filter. ** Rotate tires, inspect tire wear and measuretread depth. Perform multi-point inspection(recommended). Inspect automatic transmission fluid level (ifequipped with dipstick). Co...

Additional Maintenance Items 1 Every 20000 miles(32000 km) Replace cabin air filter (if equipped). Every 30000 miles(48000 km) Replace climate-controlled (heated andcooled) seat filter (if equipped). Replace engine air filter. At 100000 miles(160000 km) Change engine coolant. 2 Every 100000 miles(16...

Maintenance Schedule Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ...

Extensive Idling or Low-speed Driving for Long Distances as in Heavy Commercial Use (i.e. Delivery, Taxi, Patrol Car or Livery) As required Change engine oil and filter as indicated bymessage center and perform services listed inthe Normal Scheduled Maintenance chart. Inspect frequently,service as r...

Special Operating Condition Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D A...

EXCEPTIONS There are several exceptions to the Normal Schedule. They are listedbelow: Normal vehicle axle maintenance: Rear axles and power take-off (PTO) units with synthetic fluid and light-duty trucks equipped withFord-design axles are lubricated for life; do not check or change fluidunless a lea...

Edge/MKX AWD only – vehicles operating off-road in sand during high ambient temperatures must replace the AWD PTU (All-wheel drivePower Transfer Unit) lube every 20,000 miles (32,000 km). Engine air filter & cabin air filter replacement: Engine air filter and cabin air filter life is dependent o...

GENERAL INFORMATION Ensure that you review your device’s user guide before using it with SYNC. Support The SYNC support team is available to help you with any questions youcannot answer on your own. Monday-Saturday, 8:30 am-8pm EST In the United States, call: 1–888–270–1055 In Canada, call: 1–800–56...

When using SYNC, do not: • Operate playing devices if the power cords or cables are broken, splitor damaged. Carefully place cords and cables where they cannot bestepped on or interfere with the operation of pedals, seats,compartments or safe driving abilities. • Leave playing devices in the vehicle...

Phone Options during an Active Call During an active call, you have additional menu features which becomeavailable such as putting a call on hold, joining calls, etc. Use the arrowbuttons to scroll through the menu options. To access:1. Press MENU during an active call.2. When Active Call Menu is se...

When you select: You can: Call History Access your call history log.1. Press OK to select, then scroll through your callhistory options (incoming, outgoing or missed).2. Press OK when the desired selection appears inthe display.3. Press the phone button to call the selection. Return Exit the current...

Text Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages.The system can also read incoming text messages to you so that you donot have to take your eyes off the road. Receiving a Text Message Note: This is a phone-dependent feature. ...

Delete All Messages? allows you to delete current text messages from SYNC (not your phone). To delete the messages, press OK to select. Thedisplay indicates when all your text messages have been deleted andSYNC returns you to the text message menu. Note: SYNC does not automatically download all of y...

When you select: You can: Modify Phonebook Modify the contents of your phone book (i.e.add, delete, download). Press OK to selectand scroll between: Add Contacts: Press OK to add more contactsfrom your phone book. “Push” the desiredcontact(s) on your phone. Refer to yourphone’s user guide on how to ...

System Settings System Settings provide access to your Bluetooth Devices andAdvanced menu features. Use the arrow buttons to scroll through themenu options. The Bluetooth Devices menu allows you to add, connect, delete and set aphone as “primary” as well as turn your Bluetooth feature on and off. Th...

If you select: You can: Connect BluetoothDevice Connect a previously pairedBluetooth-enabled phone.1. Press OK to select and view a list ofpreviously paired phones.2. Scroll until the desired device is chosen,then press OK to connect the phone. Note: Only one device can be connected at a time. When ...

Advanced Menu Options This menu allows you to access settings such as prompts, languages,defaults, perform a master reset, install an application and view systeminformation.1. Press the phone button to enter the Phone Menu.2. Scroll until System Settings appears and press OK.3. Scroll until Advanced...

If you select: You can: Master Reset Completely erase all information stored onSYNC (phonebook, call history, text messagesand paired devices) and return to the factorydefault settings.Press OK to select. The display indicateswhen complete and SYNC takes you back tothe Advanced menu. Install Applica...

911 Assist May Not Work If • Your cellular phone or 911 Assist hardware was damaged in a crash. • The vehicle’s battery or SYNC system has no power. • The phone(s) paired and connected to the system was thrown fromthe vehicle. 911 Assist Privacy Notice Once 911 Assist is set on, it may disclose to e...

2. Follow the voice prompts to select your destination. Once your destination is selected, your current vehicle location is uploaded anda route based on current traffic conditions is calculated and sentback to your vehicle. After the route download is complete, thephone call is automatically ended. ...

SYNC Services Quick Tips Portable Your subscription is associated with yourBluetooth-enabled cellular phone number, notyour VIN (Vehicle Identification Number). Youcan pair and connect your phone to anyvehicle equipped with Traffic, Directions andInformation and continue enjoying yourpersonalized se...

“USB” “Play previous folder” 2 “Play previous track” “Play song <name>” 1 “Play track <name>” 1,3 “Refine album <name>” 1,3 “Refine artist <name>” 1,3 “Refine song <name>” 1 “Refine track <name>” 1,3 “Repeat off” “Repeat on” “Search album <name>” 1,3 “Search...

Press the voice icon and when prompted say “Bluetooth Audio” and thenany of the following: “BLUETOOTH AUDIO” “(Phone) (Media) (Bluetooth) Connections” “Pause” “Play” “Play next track ” “Play previous track ” Media Menu Features The media menu allows you to select your media source, how to playyour m...

When you select: You can: Select Source Select and play music from your USB port,auxiliary input jack (line in) or stream musicfrom your Bluetooth-enabled phone.Press OK to select, then scroll to choosefrom: USB: Press OK to access music plugged intoyour USB port. You can also plug in devices tochar...

When you select: You can: Explore USB Explore all supported digital media on yourmedia device connected to the USB port. Youcan only view media content which iscompatible with SYNC; other files saved arenot visible.Press OK to select. Then scroll to exploreindexed media on your flash drive. Similar ...

When you select: You can: Master Reset Completely erase all information stored onSYNC (all phonebook, call history, textmessages and all paired devices) and returnto the factory default settings. Application Download new software applications (ifavailable) and then load the desiredapplications throu...

Phone issues Issue Possible Cause(s) Possible Solution(s) I’m having troubleconnecting myphone to SYNC. • This is a phone-dependentfeature, OR • Possible phone malfunction. • Go to the website to review your phone’s compatibility. • Try turning off the device, resetting the device or removingthe dev...

Voice command issues Issue Possible Cause(s) Possible Solution(s) SYNC does notunderstand or iscalling the wrongcontact when Iwant to make acall. You may be usingthe wrong voicecommands, ORYou may not besaying the nameexactly as it issaved, ORContacts in yourphonebook maybe very short andsimilar, or...

INTRODUCTION WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsibility is the safeoperation of the vehicle...

HOME Press to access your home screen. Depending on your vehicle’soption package and software, your screens may vary in appearance from the screens shown in this section. Your features mayalso be limited depending on your market. Check with your authorizeddealer for availability. Using the Touch-sen...

Phone Navigation Climate You can make selections from the menu by using the OK button. Theselection menu expands and you are allowed different options. • Press the up and down arrows to scroll through the modes. • Press the right arrow to enter the mode. • Press the left or right arrows to make adju...

How to Use Voice Commands with Your System Press the voice icon; after the tone, speak your commandclearly. These commands can be said at any time “Cancel” “Exit” “Go back” “List of commands” “Main menu” “Next page” “Previous page” “What can I say?” “Help” What Can I Say To access the available voic...

Voice command list “Navigation list of commands” * “Phone list of commands” “Radio list of commands” “SD card list of commands” “Sirius satellite list of commands” * “Travel link list of commands” * “USB list of commands” “Voice instructions list of commands” “Voice settings list of commands” “Help”...

Phone/Media Candidate Lists: Candidate lists are a list of possible results from your voice commands. The system creates these lists whenit has the same confidence level of several options based on your voicecommand. To access these settings using the touchscreen:1. Press the Menu icon > Settings...

ENTERTAINMENT Your system offers many media options. You can access these optionsusing the touchscreen or voice commands. Browsing Device Content When listening to any type of audio, you can browse through otherdevices without having to change sources. For example, if you arecurrently listening to t...

AM/FM Radio Press the lower left corner of the touchscreen and then selectthe AM or FM tabs. To change between AM and FM presets, just touch the AM or FM tabs. When you select: You can: Presets Save a station by pressing and holding one ofthe memory preset areas. There is a briefmute while the stati...

HD Radio Reception and Station Troubleshooting Potential reception issues Reception area If you are listening to a multicast station andyou are on the fringe of the reception area,the station may mute due to weak signalstrength.If you are listening to HD1, the systemswitches back to the analog broad...

Radio Voice Commands If you are listening to the radio, press the voice button on thesteering wheel controls. When prompted, say any of thecommands in the following chart. If you are not listening to the radio, press the voice button and, after thetone, say “Radio”, then any of the commands in the f...

“TUNE” “FM” “Preset <#>” “FM <87.9–107.9>” “Help” “FM <87.9-107.9> HD <#>” * * If available. SIRIUS 姞 Satellite Radio (If Activated) Press the lower left corner of the touchscreen, then select theSIRIUS tab. When you select: You can: Presets Save a station by pressing and hol...

Satellite Radio Voice Commands If you are listening to SIRIUS satellite radio, press the voicebutton on the steering wheel controls. When prompted, say anyof the commands in the following chart. If you are not listening to SIRIUS satellite radio, press the voice buttonand, after the tone, say “Siriu...

“TUNE” “SAT 2 preset <#>” “SAT 3” “SAT 3 preset <#>” “Help” SIRIUS Satellite Radio Information Note: SIRIUS reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particularchannels, and its prices, at any time, with or witho...

SIRIUS troubleshooting tips Radio Display Condition Possible Action Call SIRIUS1–888–539–7474 Satellite service hasbeen deactivated bySIRIUS Satellite Radio. Call SIRIUS at1–888–539–7474 toreactivate or resolvesubscription issues. No Channels Available All the channels in theselected category areloc...

CD Voice Commands If you are listening to a CD, press the voice button on thesteering wheel controls. When prompted, say any of thecommands in the following chart. If you are not listening to a CD, press the voice button and, after thetone, say “CD”, then any of the commands in the following chart. ...

USB Port The ports are located either in the centerconsole or behind a small access door in theinstrument panel. To access and play musicfrom your device, press the lower left cornerof the touchscreen. This feature allows you to plug in media playing devices, memory sticks,flash/thumb drives and als...

“BROWSE” “All songs” “Video playlist <name>” * “All TV shows” * “Video podcast <name>” * “All video playlists” * “Help” * These commands are only available in USB mode and are device-dependent. Bluetooth Audio Your system allows you to stream audio over your vehicle’s speakers fromyour c...

3. Press the lower left corner on the touchscreen. Select either a tuned station from the FM tab or the CD tab (if there is a CD alreadyloaded into the system.) Adjust the volume to a comfortable listeninglevel. 4. Turn the portable music player on and adjust the volume to one-half the maximum. 5. P...

Phone Menu Options Press the top left corner on your touchscreen to select from thefollowing options: When you select: You can: Phone Access the on-screen numerical pad to entera number and place a call.During an active call, you can also choose tomute the call, put it on hold, activate privacy(retu...

When you select: You can: Messaging Send text messages using your touchscreen.Refer to Text messaging later in this section. Settings Access various phone settings such asBluetooth on or off, Manage Your Phone Bookand more. Refer to Phone settings later in this section. Text Messaging Note: Download...

You can then preview the message and verify the recipient as wells asupdate the message list and send it to a connected device (i.e. USBdrive). Pre-defined text message options I’ll call you back in a few minutes. I just left, I’ll be there soon. Can you give me a call? I’m on my way. I’m running a ...

Phone Settings Press Phone > Settings, then select from the following settings: If you select: You can: Bluetooth Devices Connect, disconnect, add or delete a device,as well as save it as a favorite. Bluetooth Turn Bluetooth on or off. Do Not Disturb Have all calls go directly to your voice maila...

SYNC Services Voice Commands When a route has been downloaded (non-navigation systems),press the voice button on the steering wheel controls. Whenprompted, say any of the following commands: “SERVICES” “Cancel route” “Navigation voice off” “Navigation voice on” “Next turn” “Route status” “Route summ...

SIRIUS Travel Link (if activated) can help you locate the best gas prices,find movie listings, get current traffic alerts, access the current weathermap, get accurate ski conditions and scores to current sports games. Press the information button and then select Travel Link, thenchoose from any of t...

SIRIUS Travel Link Voice Commands Note: In order to use SIRIUS Travel Link, your vehicle must be equipped with navigation and your navigation SD card must be in the SD card slot. Press the voice button and when prompted, say any of thefollowing: Travel link voice commands “5–day weather forecast” “S...

The system allows you to check your vehicle’s overall health in the formof diagnostic report card. The Vehicle Health Report contains valuableinformation such as: • Vehicle Diagnostic Information • Scheduled maintenance • Open Recalls and Field Service Actions • Unserviced items from vehicle inspect...

From this screen, you can also make other adjustments such as 12– or24–hour mode, activate GPS time synchronization and have the systemautomatically update for daylight savings time and new time zones. Once you update any settings they are automatically saved. Display You can make adjustments to the...

Sound Press the Menu icon > Sound to access settings for: Sound settings Bass THX Deep Note Demo * Midrange DSP * Treble Occupancy Mode * Set Balance and Fade Speed Compensated Volume * If equipped. Vehicle Press the Menu icon > Vehicle to access settings for: • Active Park Assist • Ambient Li...

Door Keypad Code (If Equipped) To change the keypad code for your keyless entry keypad system:1. Press the Menu icon > Vehicle > Door Keypad Code.2. Enter your current factory code, then, when prompted, enter your new code. Rear View Camera (If Equipped) This menu allows you to access settings...

Media Player Press the Menu icon > Settings > Media Player, then select from thefollowing: Media Player Autoplay With this feature on, the system automaticallyswitches to the media source upon initialconnection and you can listen to music whichhas already been randomly indexed duringthe indexi...

Navigation Press the Menu icon > Settings > Navigation, then select from the following: Navigation Map Preferences Turn breadcrumbs on and off. Have the system display your turn list top tobottom or bottom to top. Turn the Parking POI notification on and off. Route Preferences Have the system ...

Wireless & Internet Your system has a Wi-Fi feature which creates a wireless network withinyour vehicle, thereby allowing other devices (i.e. personal computers orphones) in your vehicle to speak to each other, share files, play games,etc. Using this Wi-Fi feature, everyone in your vehicle can a...

Wireless & Internet USB MobileBroadband Instead of using wi-fi, your system can alsouse a USB mobile broadband connection toaccess the internet. (You must activate yourmobile broadband device on your PC prior toconnecting it to the system.) This screenallows you to set up what is your typical ar...

Help Press the Menu icon > Settings > Help, then select from the following: Help Where Am I? View the vehicle’s current location, if yourvehicle is equipped with navigation. If yourvehicle is not equipped with navigation,nothing is displayed. System Information View the following information: ...

‘CLIMATE CONTROLS Depending on your vehicle line and option package, yourclimate screen may look different than what is shown here. A. Power: Touch to turn the system on and off. Outside air cannot enter the vehicle when the system is off.B. Passenger settings: • Touch DUAL to turn on the passenger ...

* If you have said “Temperature”, you can say any of the commands in the following “Temperature” chart. “TEMPERATURE” “High” “Low” “<15.5–29.5> degrees” “<60–85> degrees” “Help” NAVIGATION SYSTEM (IF EQUIPPED) Note: The navigation SD card must be in the SD card slot to operate the naviga...

Within these main categories, there are subcategories which containmore listings: Subcategories Restaurant Golf Parking Home & Garden Personal Care Services Automobile Dealership Govt. Office Public Transit Education To expand these listings, press the + in front of the POI listing. The system a...

This screen displays the POI icon such as: Hotel Coffeehouse Food & Drink Nightlife Attraction This icon appears when your selection exists in multiplecategories within the system. When you are viewing additional information for hotels, cityseekr willalso tell you if the hotel has certain servic...

Map Icons Vehicle mark shows current location of the vehicle. It stays in the center of the map display, except when in scroll mode. Scroll cursor allows you to scroll the map; the icon is fixed in the center of the screen. The map position closest to the cursoris in a window on the top center part ...

“DESTINATION” “<nametag>” “<POI category>” “Favorites” “Home” “Intersection” “Nearest <POI category>” “Nearest POI” “Play nametags” “POI category” “Previous destination” “Street address” “Help” “NAVIGATION” “Destination” * “Zoom city” “Zoom country” “Zoom in minimum” “Zoom out maxi...

GENERAL INFORMATION SYNC 姞 End User License Agreement (EULA) • You have acquired a device (“DEVICE”) that includes software licensed by FORD MOTOR COMPANY from an affiliate of MicrosoftCorporation (“MS”). Those installed software products of MS origin, aswell as associated media, printed materials, ...

SOFTWARE’s ability to use WMDRM to play or copy protectedcontent. This action does not affect unprotected content. When yourDEVICE downloads licenses for protected content, you agree thatMicrosoft may include a revocation list with the licenses. Contentowners may require you to upgrade the SOFTWARE ...

property rights in and to the content which may be accessed through useof the SOFTWARE is the property of the respective content owner andmay be protected by applicable copyright or other intellectual propertylaws and treaties. This EULA grants you no rights to use such content.All rights not specif...

End user notice Microsoft 姞 Windows 姞 Mobile for Automotive Important Safety Information This system Ford SYNC™ contains software that is licensed toManufacturer FORD MOTOR COMPANY by an affiliate of MicrosoftCorporation pursuant to a license agreement. Any removal, reproduction,reverse engineering ...

Software. TeleNav also does not warrant the accuracy of the map orother data used for the TeleNav Software. Such data may not alwaysreflect reality due to, among other things, road closures, construction,weather, new roads and other changing conditions. You are responsiblefor the entire risk arising...

8.3 By using the TeleNav Software, you consent to receive from TeleNavall communications, including notices, agreements, legally requireddisclosures or other information in connection with the TeleNav Software(collectively, “Notices”) electronically. TeleNav may provide such Noticesby posting them o...

OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF ORINABILITY TO USE THIS DATA, ANY DEFECT IN THIS DATA, OR THEBREACH OF THESE TERMS OR CONDITIONS, WHETHER IN ANACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVENIF NT OR ITS LICENSORS HAVE BEEN ADVISED OF THEPOSSIBILITY OF SUCH DAMAGES. Some S...

furnished shall be marked and embedded as appropriate with thefollowing “Notice of Use”, and be treated in accordance with such Notice: NOTICE OF USE CONTRACTOR (MANUFACTURER/ SUPPLIER) NAME: NAVTEQ CONTRACTOR (MANUFACTURER/SUPPLIER) ADDRESS: 425 West Randolph Street, Chicago, IL 60606. This Data is...

911 Assist™ ......................407, 481 A ABS (see Brakes) .....................211 Accessing and using your USBport ............................................461 Accessing call history/phonebook during active call .............397 Accessing your calendar ..........481 Accessing your media menu...

Booster seats ...............................21 Brakes ........................................211 anti-lock ...................................211anti-lock brake system(ABS) warning light ...............211brake warning light ................211fluid, checking and adding ....307fluid, refill capaci...