Ford 2013 Explorer v.3- Manuals

Fuel and Refueling 209 Fuel quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210 Running out of fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .211 Refueling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

ABOUT THIS MANUAL Thank you for choosing Ford. We recommend that you take some time toget to know your vehicle by reading this manual. The more that youknow about it, the greater the safety and pleasure you will get fromdriving it. WARNING: Always drive with due care and attention when using and ope...

SYMBOL GLOSSARY WARNING: You risk death or serious injury to yourself and others if you do not follow the instruction highlighted by the warning symbol. These are some of the symbols you may see on your vehicle. Symbol Description Symbol Description Symbol Description Safety alert See Owner’sManual ...

Symbol Description Symbol Description Symbol Description Heated rearwindow Interiorluggagecompartmentrelease Jack Lightingcontrol Low tirepressurewarning Maintaincorrect fluidlevel Panic alarm Parking aidsystem Parking brakesystem Powersteering fluid Powerwindows frontand rear Powerwindowlockout Ser...

Note: Including to the extent that any law pertaining to Event DataRecorders applies to SYNC 威 or its features, please note the following: Once 911 Assist (if equipped) is enabled (set ON), 911Assist may, through any paired and connected cell phone, discloseto emergency services that the vehicle has...

FORD CREDIT (U.S. ONLY) Ford Credit offers a full range of financing and lease plans to help youacquire your vehicle. If you have financed or leased your vehicle throughFord Credit, thank you for your business. For your convenience we offer a number of ways to contact us, as wellas help manage your ...

SPECIAL NOTICES New Vehicle Limited Warranty For a detailed description of what is covered and what is not covered byyour vehicle’s New Vehicle Limited Warranty, see the warrantyinformation that is provided to you along with your owner’s manual. Special Instructions For your added safety, your vehic...

MOBILE COMMUNICATIONS EQUIPMENT Using mobile communications equipment is becoming increasinglyimportant in the conduct of business and personal affairs. However, youmust not compromise your own or others’ safety when using suchequipment. Mobile communications can enhance personal safety andsecurity ...

GENERAL INFORMATION See the following sections for directions on how to properly use safetyrestraints for children. WARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be bought separately from your v...

Recommendations for Safety Restraints for Children Child size, height, weight, or age Recommendedrestraint type Smallchildren Children who have outgrown or no longerproperly fit in a child safety seat (generallychildren who are less than 4 ft. 9 in.(1.45 m) tall, are greater than age four (4)and les...

WARNING: Always restrain an unoccupied child seat or booster seat. These objects may become projectiles in a collision or sudden stop, which may increase the risk of serious injury. WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it r...

BOOSTER SEATS WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the riskof injury or death in a collision. Note: Some booster seat safety belt guides may not acco...

Types of Booster Seats • Backless booster seats If your backless booster seat has a removable shield, remove the shield.If a vehicle seating position has a low seat back or no head restraint, abackless booster seat may place your child’s head (as measured at thetops of the ears) above the top of the...

INSTALLING CHILD SEATS Using Lap and Shoulder Belts WARNING: Airbags can kill or injure a child in a child seat. NEVER place a rear-facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move theseat all the way back. WARNING: Children 12 and u...

• Inflatable safety belt: grasp theshoulder belt and lap belt togetherbehind the belt tongue. 3. While holding the shoulder andlap belt portions together, route thetongue through the child seataccording to the child seatmanufacturer’s instructions. Be surethe belt webbing is not twisted. 4. Insert t...

• Inflatable safety belt buckle 5. To put the retractor in the automatic locking mode, do the following; • Standard safety belt: grasp theshoulder portion of the belt andpull downward until all of thebelt is pulled out. • Inflatable safety belt: grasp the lapportion of the inflatable safety beltand ...

10. Before placing the child in theseat, forcibly move the seat forwardand back to make sure the seat issecurely held in place. To checkthis, grab the seat at the belt pathand attempt to move it side to sideand forward and back. There shouldbe no more than 1 inch (2.5 cm) ofmovement for proper insta...

Use of inboard lower anchors from the outboard seating positions(center seating use) WARNING: The standardized spacing for LATCH lower anchors is 11 inches (28 centimeters) center to center. Do not use LATCH lower anchors for the center seating position unless the childseat manufacturer’s instructio...

USING TETHER STRAPS Many forward-facing child safety seats include a tether strapwhich extends from the back of the child safety seat and hooksto an anchoring point called the top tether anchor. Tether straps are available as an accessory for many older safety seats. Contact the manufacturer of your...

Perform the following steps to install a child safety seat with tetheranchors: Note: If you install a child seat with rigid LATCH attachments, do not tighten the tether strap enough to lift the child seat off your vehicle seatcushion when the child is seated in it. Keep the tether strap just snugwit...

CHILD SAFETY LOCKS When these locks are set, the rear doors cannot be opened from theinside. The childproof locks are located onthe rear edge of each rear door andmust be set separately for eachdoor. • Insert the key and turn to thelock position (key horizontal) toengage the childproof locks. • Inse...

PRINCIPLES OF OPERATION WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. WARNING: To reduce the risk of injury, make sure children sit where they can be properly restrained. WARNING: Never let a passenger hold a child on his or her lap while th...

FASTENING THE SAFETY BELTS The front outboard and rear safety restraints in the vehicle arecombination lap and shoulder belts. 1. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) until you hear a snap and feelit latch. Make sure the tongue is...

All safety restraints in the vehicle are combination lap and shoulderbelts. The driver safety belt has the first locking mode and the frontoutboard passenger and rear seat safety belts have both types of lockingmodes described as follows: Vehicle sensitive mode: This is the normal retractor mode, wh...

Rear outboard inflatable safety belts (second row only–if equipped) • Buckle the combination lap and shoulderbelt. • Grasp the lap portion of the belt and pullupward until the entire belt is pulled out. • Allow the belt to retract. As the beltretracts, you will hear a clicking sound. Thisindicates t...

SAFETY BELT HEIGHT ADJUSTMENT WARNING: Position the safety belt height adjusters so that the belt rests across the middle of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness of the seat beltand increase the risk of injury in a collision. Adjust the height of t...

REAR INFLATABLE SAFETY BELT (IF EQUIPPED) WARNING: Do not attempt to service, repair, or modify the rear inflatable safety belt. The rear inflatable safety belts are fitted in the shoulder portion of thesafety belts of the second-row outboard seating positions. Note: The rear inflatable safety belts...

• During a collision of sufficient force, the inflatablebelt will inflate from inside the webbing. • The fully inflated belt’s increased diameter moreeffectively holds the occupant in the appropriateseating position, and spreads crash forces over morearea of the body than regular safety belts. Thish...

PERSONAL SAFETY SYSTEM™ The Personal Safety System provides an improved overall level of frontalcrash protection to front seat occupants and is designed to help furtherreduce the risk of airbag-related injuries. The system is able to analyzedifferent occupant conditions and crash severity before act...

The airbags are a supplemental restraint system and are designed towork with the safety belts to help protect the driver and right frontpassenger from certain upper body injuries. Airbags DO NOT inflateslowly; there is a risk of injury from a deploying airbag. Note: You will hear a loud bang and see...

DRIVER AND PASSENGER AIRBAGS WARNING: Never place your arm or any objects over an airbag module. Placing your arm over a deploying airbag can result in serious arm fractures or other injuries. Objects placed on or over theairbag inflation area may cause those objects to be propelled by theairbag int...

• Recline the seat slightly (one or two degrees) from the upright position. After all occupants have adjusted their seats and put on safety belts, it isvery important that they continue to sit properly. A properly seatedoccupant sits upright, leaning against the seat back, and centered on theseat cu...

improperly can increase the chance of injury in a crash event. Forexample, if an occupant slouches, lies down, turns sideways, sits forward,leans forward or sideways, or puts one or both feet up, the chance ofinjury during a crash is greatly increased. To know if the front passenger sensing system i...

The side airbags are located on the outboard side of the seat backs ofthe front seats. In certain lateral collisions, the airbag on the sideaffected by the collision will be inflated. The airbag was designed toinflate between the door panel and occupant to further enhance theprotection provided occu...

• A flexible headliner which opens above the side doors to allow aircurtain deployment. • Crash sensors and monitoring system with readinessindicator. See Crash Sensors and Airbag Indicator in this chapter. Children 12 years old and under should always be properly restrained inthe rear seats. The Sa...

A difficulty with the system is indicated by one or more of the following: • The readiness light will either flash or stay lit. • The readiness light will not illuminate immediately after theignition is turned on. • A series of five beeps will be heard. The tone pattern will repeatperiodically until...

PRINCIPLE OF OPERATION The remote control allows you to: • remotely lock or unlock the vehicle doors • unlock the doors without actively using a key or remote control(intelligent access only) • remotely open the power liftgate (if equipped) • remotely start or stop the engine (if equipped) • arm and...

the frequencies are jammed, you will not be able to use your remotecontrol. You can lock and unlock the doors with the key. Note: Make sure your vehicle is locked before leaving it unattended. Note: If you are in range, the remote control will operate if you press any button unintentionally. Intelli...

Intelligent Access Key (If Equipped) Your vehicle may be equipped withtwo intelligent access keys whichoperate the power locks and theremote start system. The key mustbe in the vehicle to activate thepush button start system. The intelligent access key alsocontains a removable mechanical keyblade th...

Car Finder Press the button twice within three seconds. The horn will chirpand the turn signals will flash. It is recommended that this methodbe used to locate your vehicle, rather than using the panic alarm. Sounding a Panic Alarm Note: The panic alarm will only operate when the ignition is off. Pr...

The ignition must be turned on and then back off or allow one hour topass before using remote start again if additional remote starts aredesired. Turning the Vehicle Off After Remote Starting Press the button once. The parking lamps will turn off. You may have to be closer to the vehicle than when s...

PRINCIPLES OF OPERATION MyKey 威 allows you to program keys with restricted driving modes to promote good driving habits. All but one of the keys programmed to thevehicle can be activated with these restricted modes. Any keys that havenot been programmed are referred to as an administrator key or adm...

• Audio system maximum volume of 45%. A message in the audiosystem is displayed when attempting to exceed the limited volume.Also, the speed sensitive compensated volume feature will be disabled. • Always on setting. When this is selected, you will not be able todisable AdvanceTrac, 911 Assist or Do...

CLEARING ALL MYKEYS Note: All programmed MyKeys can be cleared within the same key cycle in which a MyKey was created, otherwise an admin key is required toclear the keys. To clear all MyKeys (which removes all restrictions and returns them toadmin key status), use the information display controls t...

LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lockand unlock the vehicle. Power Door Locks The power door lock control is located on the driver and front passengerdoor panels. A. Unlock B. Lock Remote Control The remote control can be used anytime the vehicle...

Note: If any door or the luggage compartment is not closed, or if the hood is not closed on vehicles equipped with an anti-theft alarm orremote start, the horn will chirp twice and the lamps will not flash. Power Liftgate (If Equipped) WARNING: Make sure all persons are clear of the liftgate area be...

Smart Unlocks for Integrated Keyhead Transmitter This feature helps to prevent you from locking yourself out of the vehicleif your key is still in the ignition. When you open one of the front doors and lock the vehicle with thepower door lock control, all the doors will lock then unlock if your key ...

Autolock Feature (If Enabled) The autolock feature will lock all the doors when: • all the doors are closed, • the ignition is on, • you shift into any gear putting the vehicle in motion, and • the vehicle attains a speed greater than 12 mph (20 km/h). The autolock feature repeats when: • any door i...

Power Liftgate (If Equipped) WARNING: Make sure all persons are clear of the power liftgate area before using the power liftgate control. WARNING: Keep keys out of reach of children. Do not allow children to play near an open or moving power liftgate. Note: Cycling the ignition while the liftgate is...

To open or close with the remote control: Press the remote control button twice within three seconds. To open with the outside liftgatecontrol button: 1. Unlock the liftgate with the remotecontrol or power door unlock control.If the intelligent access transmitter(if equipped) is within 3 feet(1 mete...

You may also program a personal entry code through the MyFord Touchor MyLincoln Touch system (if equipped). Refer to the MyFord Touch or MyLincoln Touch chapter. Tips: • Do not set a code that uses five of the same number. • Do not use five numbers in sequential order. • The factory set code will wo...

5. Press and release the brake pedal one time. The indicator on theSTART/STOP button should begin to rapidly flash, indicating theprogramming mode has been entered and two programmed intelligentaccess keys have been detected in the vehicle. 6. Press the START/STOP button within one minute. A message...

Disarming the Alarm To disarm the alarm, do any of the following: • Press the power door unlock button within the 20-second pre-armedmode. • Press the unlock button on the remote control. • Unlock the doors with the keyless entry pad. • Enter the vehicle using intelligent access (if equipped). • Tur...

ADJUSTING THE STEERING WHEEL WARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position in the Seats chapter. 1. Unlock the steering column. 2. Adjust the steering wheel to thedesired positi...

Power Tilt and Telescope Steering Column (If Equipped) WARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. Refer to Sitting in the Correct Position in the Seats chapter. Use the control on the side of thesteering column...

AUDIO CONTROL SEEK: Press to select the next or previous stored preset or track.Press and hold to select the next orprevious frequency or seek througha track. MEDIA: Press repeatedly to scroll through available audio modes. MUTE: Press to silence the radio. VOL (Volume): Press to increase or decreas...

CRUISE CONTROL Type 1 Type 2 See the Cruise Control chapter for information on this feature. SET RES CNCL ON OFF GAP 92 Steering Wheel 2013 Explorer (exp) Owners Guide gf, 3rd PrintingUSA (fus)

ADJUSTABLE PEDALS (IF EQUIPPED) WARNING: Never adjust the accelerator and brake pedal with feet on the pedals while the vehicle is moving. The control is located on the left side of the steering column. Press andhold the appropriate control to move the pedals. A. Farther B. Closer The pedal position...

WINDSHIELD WIPERS Note: Fully defrost the windshield in icy conditions before turning on the windshield wipers. Rotate the end of the control awayfrom you to increase the speed ofthe wipers. Rotate toward you todecrease the speed of the wipers. Press the stalk down and release fora single swipe of t...

LIGHTING CONTROL A. Off B. Parking lamps, instrument panellamps, license plate lamps and taillamps C. Headlamps High Beams Push the lever forward to switch thehigh beams on. Push the lever forward again or pullthe lever toward you to switch thehigh beams off. Headlamp Flasher Pull toward you slightl...

The autolamp system provides lightsensitive automatic on-off control ofthe exterior lights normallycontrolled by the headlamp control. The headlamps will remain on for aperiod of time after you switch theignition off. You can adjust the timedelay using the message center inthe instrument cluster. Se...

7. Turn the lighting control to the off position when the desired delaytime has been reached. The headlamps and parking lamps will turn off.You can set the headlamp exit delay to one of the following settings: • Off • 10 seconds • 20 seconds • 30 seconds • 60 seconds • 90 seconds • 120 seconds • 180...

Activating the system Switch the system on within the information display. See Information displays . Turn the lighting control to theautolamps position. Manually overriding the system When the automatic control hasactivated high beams, pushing orpulling the stalk will provide atemporary override to...

DIRECTION INDICATORS The turn signal lever does not mechanically lock in the upward ordownward position when activated. The turn signal control activation andcancellation is electronic. • Push down to activate the left turnsignal. • Push up to activate the right turnsignal. • Push the lever again in...

Third row cargo lamp The dome lamp lights when: • any door is opened. • the instrument panel dimmer button is pressed until thecourtesy lamp comes on. • any of the remote entry controls are pressed and theignition is off. The courtesy lamp can also be turned on and off manually by pressingthe contro...

POWER WINDOWS WARNING: Do not leave children unattended in the vehicle and do not let children play with the power windows. They may seriously injure themselves. WARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in t...

Window Lock Press the control to lock or unlockthe rear window controls. Bounce-Back The window will stop automatically while closing and reverse somedistance if there is an obstacle in the way. Overriding the Bounce-Back Feature Pull up the window switch and hold within two seconds of the windowrea...

EXTERIOR MIRRORS Power Exterior Mirrors WARNING: Do not adjust the mirror while the vehicle is in motion. A. Left mirror B. Adjustment control C. Right mirror To adjust your mirrors: 1. Press the button to select the mirror you want to adjust. An indicatorlight on the button will illuminate. 2. Use ...

Press the button to fold the mirrorsin or out. A mirror may also be manually folded by pulling it toward the doorwindow glass. This may cause the mirror to appear loose and it will needto be re-synchronized. Press the button to fold the mirrors in. A clickwill be heard indicating re-synchronization....

The image of the approachingvehicle is small and near the inboardedge of the main mirror when it is ata distance. The image becomeslarger and begins to move outboardacross the main mirror as the vehicleapproaches (A). The image willtransition from the main mirror andbegin to appear in the blind spot...

GAUGES Type 1 Cluster shown in standard measure – metric clusters similar. A. Tachometer B. Information display. See Information displays for more information. C. Speedometer D. Fuel gauge Fuel Gauge Indicates approximately how much fuel is left in the fuel tank (when theignition is on). The fuel ga...

Type 2 Cluster shown in standard measure – metric clusters similar. A. Information display. See Information displays for more information. B. Speedometer C. Infotainment display. See MyFord Touch™ for more information. WARNING LAMPS AND INDICATORS There indicators can alert you to a vehicle conditio...

• Engaged (green light): Illuminates when the adaptive cruise controlsystem is engaged. Turns off when the speed control system isdisengaged. Airbag readiness If this light fails to illuminate when the ignition is turned on,continues to flash or remains on, contact your authorized dealeras soon as p...

Service engine soon The service engine soon indicator light illuminates when the ignition is first turned to the on position to check the bulb andto indicate whether the vehicle is ready for Inspection/Maintenance (I/M) testing. Normally, the “service engine soon”light will stay on until the engine ...

†Trip 1 / 2 Total Odometer (located in lower right of display). Note: this will also display in other menus. †See Trip computer later in this section for more information. Information Intelligent 4WD — Displays power distribution between the front and rearwheels. More power to either front or rear w...

Settings Convenience Autolamp Delay Off or number of seconds Compass Display DTE Calculation Normal or Towing Easy Entry/Exit Locks Autolock Autounlock Remote Unlock All Doors orDriver First Oil life Reset Set XXX% Power Liftgate Switch Enabled or Disabled Remote Start Climate Control Heater – A/C /...

Information Messages See Information Messages later in this chapter for more information. Information Display Controls (Type 2) • Press the up and down arrowbuttons to scroll through andhighlight the options within amenu. • Press the right arrow button toenter a sub-menu. • Press the left arrow butt...

Fuel Economy Use the left/right arrow buttons to choose the desired fueleconomy display. Fuel Economy Inst Fuel Economy XX. Min Fuel History Instantaneous fuel usage X †Fuel usage over a 5, 10, or30 minute time span X Total odometer (lower left corner) Press and hold OK to reset the currently displa...

Information In this mode, you can view different vehicle system informationand perform a system check. Warnings XX Warnings Displays the number of warnings that needimmediate attention in amber. You can only view thewarnings form the System Check menu. View themimmediately by pressing OK or right ar...

INFORMATION MESSAGES Note: Depending on the vehicle options equipped with your vehicle, not all of the messages will display or be available. Certain messages may beabbreviated or shortened depending upon which cluster type you have. Press the OK button toacknowledge and remove somemessages from the...

Alarm/Security Messages Action / Description To Stop Alarm, StartVehicle Displayed when the perimeter alarm system isarmed and the vehicle is entered using the keyon the driver’s side door. In order to preventthe perimeter alarm system from triggering,the ignition must be turned to start or onbefore...

Battery and Charging System Messages Action / Description Check ChargingSystem Displayed when the charging system needsservicing. If the warning stays on or continuesto come on, contact your authorized dealer assoon as possible. Turn Power Off toSave Battery Displayed when the battery managementsyst...

BLIS 威 Messages Action / Description Blind Spot NotAvailable SensorBlocked Displayed when the blind spot informationsystem/cross traffic alert system sensors areblocked. Driver can typically clean the sensorto resolve. Blind Spot SystemFault Displayed when a fault with the blind spotinformation syst...

Collision Warning System Messages Action / Description Collision Warn NotAvailable Displayed when there is a system malfunctionwith the collision warning system. The systemwill be disabled. Contact your authorizeddealer as soon as possible. Collision Warn NotAvailable SensorBlocked Displayed when th...

Terrain Management / Off Road / Hill Descent Messages Action / Description Hill Descent ControlReady Displayed when hill descent control mode isactivated. Terrain ManagementNormal Mode Displays driver selected terrain managementnormal mode. Normal Mode Active Displays terrain management normal mode ...

Reminder Messages Action / Description Steering Lock TurnWheel to Unlock Displays when you need to turn the steeringwheel in order to disengage the steering lock. Shift to Park Displays as a reminder to shift into park. Tire Messages Action / Description Low Tire Pressure Displays when one or more t...

GENERAL AUDIO INFORMATION Radio Frequencies and Reception Factors AM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Canadian Radio and TelecommunicationsCommission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.9–107.7, 107.9 MHz Radio rec...

Always handle discs by their edges only. Clean the disc with an approvedCD cleaner only, wiping from the center of the disc toward the edge. Donot clean in a circular motion. Do not expose discs to direct sunlight or heat sources for extendedperiods of time. MP3 Track and Folder Structure Audio syst...

Menu Structure Note: Depending on your system, some options may appear slightly different, not at all or on-screen and able to be selected using thefunction buttons. Press MENU. Press the up and down arrow buttons to scroll through the options (ifactive). Press the right arrow to enter a menu. Press...

AM/FM/CD PREMIUM AUDIO SYSTEM WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that you use extreme caution when using any device or feature that may takeyour focus off the road. Your primary responsibility is the safe operationof...

• In SIRIUS mode, select the previous or next channel. If a specificcategory is selected, (Jazz, Rock, News, etc.), use the seek buttonsfind to the previous or next channel in the selected category. • In CD mode, select the previous or next track. AM/FM/CD SONY 姞 AUDIO SYSTEM WARNING: Driving while ...

• In SIRIUS mode, select the previous or next channel. If a specificcategory is selected, (Jazz, Rock, News, etc.), use the seek buttonsfind to the previous or next channel in the selected category. • In CD mode, select the previous or next track. C. SOUND: Allows you to adjust the sound settings (T...

The auxiliary input jack (AIJ) allowsyou to connect and play music fromyour portable music player throughthe vehicle speakers. You can useany portable music player designedfor use with headphones. Your audioextension cable must have male 1 ⁄ 8 -inch (3.5 millimeter) connectors at each end. 1. Make s...

MEDIA HUB (IF EQUIPPED) The media hub is located in the center console and has the followingfeatures: A. A/V inputs B. SD card slot C. USB ports For more information, see the MyFord Touch chapter. SATELLITE RADIO INFORMATION (IF EQUIPPED) Satellite Radio Channels SIRIUS 威 broadcasts a variety of mus...

D. Recirculated air: Press to switch between outside air and recirculated air. When the LED on the button is lit, the air currently inthe passenger compartment is being recirculated. Using recirculated aircan reduce the time needed to cool the interior and reduce unwantedodors from entering your veh...

DUAL AUTOMATIC TEMPERATURE CONTROL SYSTEM (WITH MyTemp) Note: You can switch temperature units between Fahrenheit and Celsius. See Settings in the MyFord Touch or MyLincoln Touch chapter. A. MyTemp: Allows you to quickly adjust to a frequently used setting with a single touch.Press + and - to increa...

F. A/C: Press to turn air conditioning on or off. Air conditioning cools the vehicle using outside air. To improve air conditioning when starting yourvehicle, drive with the windows slightly open for two to three minutes.Use A/C with recirculated air to improve cooling performance and efficiency. No...

GENERAL OPERATING TIPS Manual Heating and Air Conditioning System • To reduce fog build-up on the windshield during humid weather, selectDefrost. Temperature and fan speed can also be increased to improveclearing. • To reduce humidity build-up inside the vehicle, do not drive with thesystem off or w...

Dual Zone Automatic Temperature Control • To reduce fog build-up on the windshield during humid weather, selectDefrost. Temperature and fan speed can also be increased to improveclearing. • To reduce humidity build-up inside the vehicle, do not drive with thesystem off or with recirculated air engag...

HEATED WINDOWS AND MIRRORS (IF EQUIPPED) Heated Rear Window Note: The ignition must be switched on to use this feature. Press the button to clear the rear window of thin ice and fog. Press thebutton again within 10 minutes to switch it off. It switches offautomatically after 10 minutes, or when you ...

REMOTE START CLIMATE OPERATION (IF EQUIPPED) The climate control system adjusts the cabin temperature during remotestart. You cannot adjust the system during remote start operation. Turn theignition on to return the system to its previous settings. You can nowmake adjustments. You will need to turn ...

SITTING IN THE CORRECT POSITION WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system, resulting inserious injury or death in a crash. Always sit upright against your seatba...

• Keep sufficient distance between yourself and the steering wheel. Werecommend a minimum of 10 inches (250 millimeters) between yourbreastbone and the airbag cover. • Hold the steering wheel with your arms slightly bent. • Bend your legs slightly so that you can press the pedals fully. • Position t...

Note: Before adjusting any head restraint, adjust the seatback to an upright driving/riding position. Properly adjust the head restraint so thatthe top of the head restraint is even with the top of your head andpositioned as close as possible to the back of your head. For occupantsof extremely tall ...

Second row outboard seat headrestraints The head restraints consist of: A. Energy absorbing head restraint B. Steel stems C. Guide sleeve unlock/remove buttons D. Fold strap • Fold: pull the fold strap (D). Pull it back up to reset. • Remove: fold the head restraint. Press and hold both of the unloc...

Tilting Head Restraints (If Equipped) The front head restraints may have a tilting feature for extra comfort. Totilt the head restraint, do the following: 1. Adjust the seat back to an upright driving/ridingposition. 2. Tilt the head restraint forward by gently pullingthe top of the head restraint. ...

MEMORY FUNCTION (IF EQUIPPED) This memory control, located on thedriver’s door, allows automaticpositioning of the driver seat, powermirrors, steering column (ifequipped) and power adjustablefoot pedals (if equipped) to threeprogrammable positions. Programming a memory position Note: A memory positi...

If the engine falls below 350 rpm while the cooled seats are on, thefeature will turn itself off and will need to be reactivated. Note: When the heated/cooled front seat is active, you will be able to hear the fan operating inside the seat. This is normal. Heated and Cooled Seat Air Filter Replaceme...

REAR SEATS Second Row Seats Recline Adjustment WARNING: Always drive and ride with your seat back upright and the lap belt snug and low across the hips. WARNING: Reclining the seat back can cause an occupant to slide under the seat’s safety belt, resulting in severe personal injuries in the event of...

Moving the seats backwards andforwards (if equipped) Third Row Seats Third Row Seat Access (Manual Seats) WARNING: Before returning the seatback to its original position, make sure that cargo or any objects are not trapped behind the seatback. After returning the seatback to its original position, p...

Fold and tumble the second row seat to access the third row: 1. Fold the outboard head restraint bypulling the head restraint releasestrap. 2. Lift the handle located on the sideof the seat to fold the seatback flat. 3. Lift the handle all the way up until the seatreleases from the floor. Rotate the...

4. To return the seatback to the floor from tumbledposition, rotate the seat down until you hear itlatching to the floor. 5. Lift the seatback toward the rearof the vehicle, and rotate theseatback until you hear a click,locking it in the upright position. Note: The seatback will not raise if the rea...

1. Fold the outboard head restraint bypulling the head restraint releasestrap. 2. Pull on the strap located on theback of the second row seat. Thiswill fold the seatback forward. Pullthe strap a second time to tumblethe seat forward, allowing easy exitfrom the 3rd row seat. 3. To return the seatback...

5. Pull the head restraint back up to its normal adjusted position. Ensure that the rear latch hooks areproperly engaged with the floorstriker. Note : Ensure that the seat and seatback are latched securely inposition. Keep floor area free ofobjects that would prevent properseat engagement. Folding t...

4. Release the cushion latches by pulling thenumber 2 strap while pulling on the straplocated at the top of the seatback to tumblethe seat all the way into the tub in the floor. Note: Do not use the seat anchors as cargo tie downs. Note: Do not use the third row seatback as a load floor when the sea...

The third row power seat buttons are located behind the third row seatson the left-hand quarter trim panel. A. NORMAL: Press to return the seat to the normal seating position. B. STOW: Press to stow the seat into the tub floor. C. FOLD: Press to fold down the seatback. D. RH / BOTH / LH: Press to se...

UNIVERSAL GARAGE DOOR OPENER The appearance of your vehicle’s universal garage door opener will varyaccording to your option package. Before programing, make sure youidentify which transmitter you have by comparing it to the graphicsbelow. HomeLink 威 Car2U 威 Home Automation System Note: The programm...

Rolling Code Programming Note: If you do not follow the time-sensitive instructions, the device will time out and you will have to repeat the complete procedure. Note: It may be helpful to have another person assist you in programming the transmitter. 1. Switch the ignition on. 2. Press and hold the...

8. The LED lamp will begin to flash rapidly until programming iscomplete. If your garage door does not operate, repeat the previoussteps. Otherwise, call the toll-free help line at 1-866-572-2728. The LED lamp above the selected button will illuminate to confirm thatthe system is responding to the b...

4. Press and hold the function button you programmed for 5 seconds,then release. You may need to do this twice to activate the door. If yourgarage door does not operate, observe the indicator light. If the indicator light stays on, programming is complete. Press andrelease the programmed button to a...

Reprogramming a single button To program a device to a previously trained button, follow these steps: 1. Press and hold the desired button. Do NOT release the button. 2. The indicator light will begin to flash after 20 seconds. Withoutreleasing the button, follow Step 1 in the Programming section. F...

AUXILIARY POWER POINTS WARNING: Do not plug optional electrical accessories into the cigarette lighter socket (if equipped). Improper use of the lighter can cause damage not covered by your warranty, and can result in fireor serious injury. Note: If used when the engine is not running, the battery w...

CENTER CONSOLE WARNING: Use only soft cups in the cupholder. Hard objects can injure you in a collision. Your vehicle may be equipped with a variety of console features. Theseinclude: A. Cupholders B. Utility storage compartment withpower point C. Power point and 110 volt ACpower point outlet (if eq...

OVERHEAD CONSOLE The appearance of the overhead console will vary according to youroption package. Press near the rear edge of the doorto open it. Storage Compartments 201 2013 Explorer (exp) Owners Guide gf, 3rd PrintingUSA (fus)

Ignition On Mode To switch the ignition on, press the start button. Allelectrical circuits and accessories are operational, andwarning lamps and indicators will illuminate. Starting Your Vehicle 1. Make sure the transmission is in position P. 2. Fully press the brake pedal.3. Press the start button....

Stopping the Engine When Your Vehicle is Moving 1. Press and hold the start button for at least one second or press the start button three times within two seconds. 2. Shift to position N and use the brakes to bring the vehicle to a safe stop. 3. After the vehicle has stopped, turn the engine off an...

Some warning lights will briefly illuminate. Note: Do not touch the accelerator pedal. 1. Fully press the brake pedal. 2. Select position P or N. 3. Start the engine. The engine may continue cranking for up to15 seconds or until the vehicle starts. Note: If the engine does not start on the first try...

Using the Engine Block Heater Make sure the receptacle terminals are clean and dry prior to use. Cleanthem with a dry cloth, if necessary. The heater uses 0.4 to 1.0 kilowatt-hours of energy per hour of use. Thesystem does not have a thermostat. It achieves maximum temperatureafter approximately thr...

SAFETY PRECAUTIONS WARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler door (Easy Fuel 威 no cap fuel system), do not refuel until...

• Avoid getting fuel liquid in your eyes. If fuel is splashed in the eyes,remove contact lenses (if worn), flush with water for 15 minutes andseek medical attention. Failure to seek proper medical attention couldlead to permanent injury. • Fuels can also be harmful if absorbed through the skin. If f...

Octane recommendations 3.5L V6 engine Regular unleaded gasoline with a pump (R+M)/2 octane rating of 87 isrecommended. Some stations offer fuels posted as Regular with anoctane rating below 87, particularly in high altitude areas. Fuels withoctane levels below 87 are not recommended. 2.0L/3.5L EcoBo...

Refilling with a Portable Fuel Container WARNING: Do not insert the nozzle of portable fuel containers or aftermarket funnels into the capless fuel system. This could damage the fuel system and its seal, and may cause fuel to run onto theground instead of filling the tank, which could result in seri...

4. After you are done pumping fuel, slowly remove the fuel fillernozzle—allow about ten seconds after pumping fuel before removing thefuel filler nozzle. This allows residual fuel to drain back into the fuel tankand not spill onto the vehicle. Note: A fuel spillage concern may occur if overfilling t...

For consistent results when filling the fuel tank: • Turn the ignition off before fueling; an inaccurate reading results if theengine is left running. • Use the same fill rate (low–medium–high) each time the tank is filled. • Allow no more than two automatic click–offs when filling. Results are most...

EMISSION CONTROL SYSTEM WARNING: Do not park, idle, or drive your vehicle in dry grass or other dry ground cover. The emission system heats up the engine compartment and exhaust system, which can start a fire. WARNING: Exhaust leaks may result in entry of harmful and potentially lethal fumes into th...

AUTOMATIC TRANSMISSION WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn the ignition to the off position and remove the key whenever you leave your vehicle. WARNING: Do not use the tow feature when driving in icy or slippery conditions as the incre...

SelectShift Automatic 姞 Transmission Note: Your transmission must be in M (Manual) for SelectShift to operate properly. Your SelectShift automatic transmission gives you the ability to manuallychange gears if you’d like. To use SelectShift, move the gearshift leverinto M (Manual). Now you can use th...

If your vehicle is equipped with paddles on the steering wheel: • Pull the left paddle (–) todownshift the transmission. • Pull the right paddle (+) to upshiftthe transmission. Upshift to the recommended shift speeds according to the following chart. Upshifts when accelerating (recommended for best ...

Brake-shift interlock WARNING: Do not drive your vehicle until you verify that the brakelamps are working. WARNING: When doing this procedure, you will be taking the vehicle out of park which means the vehicle can roll freely. To avoid unwanted vehicle movement, always fully set the parking brakepri...

2. Locate the brake shift interlock lever in front of theshifter assembly. 3. Apply the brake pedal. Gently push and hold thebrake shift interlock lever while pulling the gearshiftlever out of the P (Park) position and into the N(Neutral) position. 4. Install the trim panel. 5. Apply the brake pedal...

How Utility Vehicles Differ from Other Vehicles Truck and utility vehicles can differ from some other vehicles. Yourvehicle may be higher to allow it to travel over rough terrain withoutgetting hung up or damaging underbody components. The differences that make your vehicle so versatile also make it...

Maintenance and modifications The suspension and steering systems on your vehicle have been designedand tested to provide predictable performance whether loaded or emptyand durable load carrying capability. For this reason, Ford MotorCompany strongly recommends that you do not make modifications suc...

GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may beworn-out and should be inspected by an authorized dealer. If yourvehicle has continuous vibration or shudder in the steering wheel while...

PRINCIPLES OF OPERATION The traction control system helps avoid drive wheel spin and loss oftraction. If your vehicle begins to slide, the system applies the brakes to individualwheels and, when needed, reduces engine power at the same time. If thewheels spin when accelerating on slippery or loose s...

PRINCIPLES OF OPERATION WARNING: Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction and/or wheel/tire size may change the handlingcharacteristics of the vehicle and may adversely affect the performanceof the AdvanceTrac 威 system. In...

A Vehicle without AdvanceTrac 威 with RSC 威 skidding off its intended route. B Vehicle with AdvanceTrac 威 with RSC 威 maintaining control on a slippery surface. USING ADVANCETRAC 姞 WITH RSC 姞 The system automatically activates when you start your engine. TheAdvanceTrac 威 with RSC 威 system cannot be co...

TERRAIN MANAGEMENT (IF EQUIPPED) This system optimizes drivability and comfort as well as maximizingtraction while operating on different types of terrain. Turn the control located on the center console to choose between thefollowing modes: 1. Grass/Gravel/Snow mode should be selected where a firm s...

If the system becomes inoperable, selecting some modes may not bepossible and a message is displayed. If it becomes inoperable due to asystem malfunction, all of the mode indicators on the control turn offand one of the following messages appears in the information display: TERRAIN MANAGEMENT SYSTEM...

SENSING SYSTEM (IF EQUIPPED) WARNING: To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed)objects when moving in reverse on a flat surface at parking speeds.Traffic control sy...

If a fault is present in the system, a warning message appears in theinformation display and does not allow the driver to switch the faultedsystem on. Note: If your vehicle is equipped with MyKey 威 , it is possible to prevent turning the sensing system off. Refer to the MyKey 威 chapter. Using the Re...

Using Active Park Assist Press the button; the touch screendisplays a message and acorresponding graphic to indicateit’s searching for a parking space.Use the turn signal to indicatewhich side of the vehicle you wantthe system to search on. Note: If the turn signal is not on, the system automaticall...

Automatic Steering into Parking Space Note: If vehicle speed exceeds 7 mph (12 km/h), the system turns off and you need to take full control of the vehicle. Note: If a maneuver is interrupted before completion, the system turns off. The steering wheel position will not indicate the actual position o...

WARNING: Use caution when using the rear video camera and the liftgate is ajar. If the liftgate is ajar, the camera will be out of position and the video image may be incorrect. All guidelines (ifenabled) have been removed when the liftgate is ajar. WARNING: Use caution when turning camera features ...

Guidelines and the Centerline Note: Active guidelines and fixed guidelines are only available when the transmission is in R (Reverse). Note: The centerline is only available if Active or Fixed guidelines are on. A. Active guidelines B. Centerline C. Fixed guideline: Green zone D. Fixed guideline: Ye...

Visual Park Aid Alert Note: Visual park alert is only available when the transmission is in R (Reverse). Note: The reverse sensing system is not effective at speeds above 3 mph (5 km/h) and may not detect certain angular or moving objects. The visual park aid alert allows the driver to view the area...

PRINCIPLES OF OPERATION Cruise control lets you maintain a set speed without keeping your footon the accelerator pedal. USING CRUISE CONTROL WARNING: Do not use cruise control in heavy traffic or on roads that are winding, slippery or unpaved. Note: Vehicle speed may vary momentarily when driving up...

WARNING: Do not use in poor visibility, specifically fog, rain, spray or snow. Note: It is the driver’s responsibility to stay alert, drive safely and be in control of the vehicle at all times. The system is designed to automatically adjust your speed to maintain aproper distance between you and the...

4. Take your foot off the accelerator pedal. 5. A lead vehicle graphic willilluminate if there is a vehicledetected in front of you. Following a Vehicle WARNING: When following a vehicle in front of you, the vehicle will not decelerate automatically to a stop, nor will the vehicle always decelerate ...

Detection Issues The radar sensor has a limited field of vision. It may not detect vehicles atall or detect a vehicle later than expected in some situations. The leadvehicle graphic will not illuminate if a vehicle is not detected in front of you. Detection issues can occur: A. When driving on a dif...

Blocked Sensor WARNING: Do not use ACC when towing a trailer with brake controls. Aftermarket trailer brakes will not function properly when ACC is activated because the brakes are electronically controlled.Failing to do so may result in loss of vehicle control, which could resultin serious injury. ...

Cause Action Swirling water, or snow or ice onthe surface of the road mayinterfere with the radar signals Do not use ACC in these conditionbecause it may not detect, warn,or respond to potential collisions. Desert / remote area with no othervehicles and no roadside objects Wait a short time or switc...

DRIVER ALERT (IF EQUIPPED) WARNING: The driver alert system is designed to aid you. It is not intended to replace your attention and judgment. You are still responsible to drive with due care and attention. Note: The system will store the on/off setting in the information display menu through igniti...

LANE KEEPING SYSTEM (IF EQUIPPED) WARNING: The system is designed to aid the driver. It is not intended to replace the driver’s attention and judgment. The driver is still responsible to drive with due care and attention. The system detects unintentional drifting toward the outside of the laneand al...

Gray: Indicates that the system is temporarily unable to provide awarning or intervention on the indicated side(s). This may be because: • the vehicle is under the activation speed • the turn indicator is active • the vehicle is in a dynamic maneuver • the road has no or poor lane markings in the ca...

BLIND SPOT INFORMATION SYSTEM (BLIS 姞 ) WITH CROSS TRAFFIC ALERT (CTA) (IF EQUIPPED) WARNING: To help avoid injuries, NEVER use the BLIS 威 as a replacement for using the interior and exterior mirrors and looking over your shoulder before changing lanes. BLIS 威 is not a replacement for careful drivin...

Using the Systems BLIS 威 turns on when the engine is started and the vehicle is driven forward above 3 mph (5 km/h); it remains on while the transmission is inD (Drive) and N (Neutral). If shifted out of D (Drive) or N (Neutral),the system enters CTA mode. Once shifted back into D (Drive), BLIS 威 tu...

Zone coverage also decreases when parking at shallow angles. Here, theleft sensor is mostly obstructed; zone coverage on that side is severelylimited. System Lights and Messages The BLIS 威 and CTA systems illuminate a yellow alert indicator inthe outside mirror on the side ofthe vehicle the approach...

Switching the Systems Off and On One or both systems can be switched off temporarily by using theinformation display control; refer to the Information Display chapter. When the BLIS 威 is switched off, the driver does not receive alerts and the information display shows BLIND SPOT SYS OFF and/or CTAS...

If it is, a red warning lightilluminates and an audible warningchime sounds. The brake support system assists the driver in reducing the collisionspeed by charging the brakes. If the risk of collision further increasesafter the warning light illuminates, the brake support prepares the brakesystem fo...

Blocked Sensors If a message regarding a blockedsensor appears in the informationdisplay, the radar signals from thesensor have been obstructed. Thesensors are located behind a fasciacover near the driver side of thelower grille. When the sensors areobstructed, a vehicle ahead cannotbe detected and ...

System Limitations WARNING: The collision warning system’s brake support can only help reduce the speed at which a collision occurs if the driver applies the vehicle’s brakes. The brake pedal must be pressedjust like any typical braking situation. Due to the nature of radar technology, there may be ...

Steering Tips If the steering wanders or pulls, check for: • an improperly inflated tire • uneven tire wear • loose or worn suspension components • loose or worn steering components • improper vehicle alignment A high crown in the road or high crosswinds may also make the steeringseem to wander/pull...

CARGO NETS (IF EQUIPPED) WARNING: This net is not designed to restrain objects during a collision or heavy braking. The cargo net secures lightweightobjects in the cargo area. Attach thenet to the loops and anchorsprovided. ROOF RACKS AND LOAD CARRIERS (IF EQUIPPED) WARNING: When loading the roof ra...

For proper function of the roof rack system, loads must be placeddirectly on crossbars affixed to the roof rack side rails. Your vehicle maybe equipped with factory-installed crossbars. Ford Genuine Accessorycrossbars, designed specifically for your vehicle, are also recommendedfor use with your roo...

Vehicle Curb Weight – is the weight of your new vehicle when you picked it up from your authorized dealer plus any aftermarketequipment. Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Label on the B-...

Example only: Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue loador king pin weight is also part of cargo weight. Load Carrying 283 2013 Explorer (exp) Owners Guide gf, 3rd PrintingUSA (fus)

GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all payload. GAWR (Gross Axle Weight Rating) – is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Safety Compliance...

• Example only: WARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structuraldamage, serious damage to the vehicle, loss of control and personalinjury. Load Carrying 285 20...

GCW (Gross Combined Weight) – is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer. GCWR (Gross Combined Weight Rating) – is the maximum allowable weight of the vehicle and the loaded trailer – including all cargo andpassengers – that the vehicle can handle without r...

WARNING: Do not use replacement tires with lower load carrying capacities than the original tires because they may lower the vehicle’s GVWR and GAWR limitations. Replacement tires with ahigher limit than the original tires do not increase the GVWR andGAWR limitations. WARNING: Exceeding any vehicle ...

TOWING A TRAILER WARNING: Do not exceed the GVWR or the GAWR specified on the certification label. WARNING: Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of the vehicle and could result in engine damage, transmission damage, structural damage, lossof vehicle c...

This feature applies the vehicle brakes at individual wheels and, ifnecessary, reduces engine power. If the trailer begins to sway, thestability control light flashes and the message TRAILER SWAY REDUCE SPEED appears in the information display. The first thing to do is slow the vehicle down, then pu...

Engine/Passengers/Trailer Class Maximum GCWR - lb (kg) Maximum Trailer Weight - lb (kg) 4WD vehicles 3.5L TiVCT/6–passenger/Class I 7100 (3221) 2000 (907) 3.5L TiVCT/7–passenger/Class I 7110 (3225) 2020 (916) 3.5L TiVCT/6–passenger/Class III 10160 (4608) 5000 (2268) 3.5L TiVCT/7–passenger/Class III ...

Trailer Towing Connector (Vehicles Equipped with a TrailerTowing/Prep Package) The trailer towing connector is located under the rear bumper, on theleft side of the vehicle. Color Function 1. Dark Green Right turn signal/brake lamp/hazard flasher 2. Yellow Left turn signal/brake lamp/hazard flasher ...

Hitches Do not use hitches that clamp onto the vehicle bumper. Use aload-carrying hitch. You must distribute the load in your trailer so that 10–15% of the totalweight of the trailer is on the tongue. Do not to exceed the maximumtongue load of 500 pounds (227 kilograms) on a Class III receiver. Weig...

Trailer Brakes WARNING: Do not connect a trailer’s hydraulic brake system directly to your vehicle’s brake system. Your vehicle may not have enough braking power and your chances of having a collision greatlyincrease. Electric brakes and manual, automatic or surge-type trailer brakes aresafe if inst...

• Shift to a lower gear when driving down a long or steep hill. Do notapply the brakes continuously, as they may overheat and become lesseffective. • Use the grade assist or tow/haul feature when towing. These provideengine braking and help eliminate excessive transmission shifting foroptimum fuel e...

WRECKER TOWING If you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, yourroadside assistance service provider. It is recommended that your vehicle be towed with a wheel lift anddollies or flatbed equipment. Do not tow w...

TOWING THE VEHICLE ON FOUR WHEELS Emergency Towing In the event your vehicle becomes disabled (without access to wheeldollies, car-hauling trailer, or flatbed transport vehicle), it can beflat-towed (all wheels on the ground, regardless of thepowertrain/transmission configuration) under the followin...

BREAKING-IN You need to break in new tires for approximately 300 miles(480 kilometers). During this time, your vehicle may exhibit some uniquedriving characteristics. Avoid driving too fast during the first 1000 miles(1600 kilometers). Vary your speed frequently and change up throughthe gears early....

• Carry unnecessary weight (approximately 1 mpg [0.4 km/L] is lost forevery 400 lb [180 kg] of weight carried). • Add particular accessories to your vehicle (e.g. bug deflectors,rollbars/light bars, running boards, ski racks). • Drive with the wheels out of alignment. DRIVING THROUGH WATER If drivin...

FLOOR MATS WARNING: Always use floor mats that are designed to fit the foot well of your vehicle. Only use floor mats that leave the pedal area unobstructed. Only use floor mats that are firmly secured toretention posts so that they cannot slip out of position and interferewith the pedals or impair ...

WARNING (Continued) • Failure to properly follow floor mat installation or attachmentinstructions can potentially cause interference with pedal operationcausing loss of control of vehicle. • To install floor mats, position the floor mat so that the eyelet is overthe retention post and press down to ...

ROADSIDE ASSISTANCE Vehicles Sold in the U.S. : Getting Roadside Assistance To fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program. Thisprogram is separate from the New Vehicle Limited Warranty. The serviceis available: • 24-hours ...

Vehicles Sold in the U.S. : Using Roadside Assistance Complete the roadside assistance identification card and place it in yourwallet for quick reference. This card is found in the owner’s manualportfolio in the glove compartment. U.S. Ford vehicle customers who require Roadside Assistance, call1-80...

FUEL CUT-OFF SWITCH WARNING: Failure to inspect and if necessary repair fuel leaks after a collision may increase the risk of fire and serious injury. Ford Motor Company recommends that the fuel system be inspected byan authorized dealer after any collision. In the event of a moderate to severe coll...

Preparing Your Vehicle Note: Use only a 12 volt supply to start your vehicle. Note: Do not disconnect the battery of the disabled vehicle as this could damage the vehicle’s electrical system. 1. Park the booster vehicle close to the hood of the disabled vehiclemaking sure the two vehicles do not tou...

1. Connect the positive (+) jumpercable to the positive (+) terminal ofthe discharged battery. 2. Connect the other end of thepositive (+) cable to the positive(+) terminal of the assisting battery. 3. Connect the negative (-) cable tothe negative (-) terminal of theassisting battery. 4. Make the fi...

Removing the Jumper Cables Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. Remove the jumper cables in the reverse order that they wereconnected. 1. Remove the jumper cable fromthe ground metal surface. 2. Remove the jumper cable on thenega...

GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorizeddealer. While any authorized dealer handling your vehicle line willprovide warranty service, we recommend you return to your sellingauthorized dealer who wants to ensure your continued satisfaction. Plea...

• Ford Genuine Accessories • Service specials and promotions. In Canada: Mailing address Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E4 Telephone 1-800-565-3673 (FORD) Online www.ford.ca Additional assistance If you have questions or concerns,...

UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY) For vehicles delivered to authorized Canadian dealers. In those caseswhere you continue to feel that the efforts by Ford of Canada and theauthorized dealer to resolve a factory-related vehicle service concernhave been unsatisfactory, Ford of C...

CHANGING A FUSE Fuses WARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. If electrical components in the vehicleare not working, a fuse may haveblown. Blown fuses are identifi...

FUSE SPECIFICATION CHART Power Distribution Box WARNING: Always disconnect the battery before servicing high current fuses. WARNING: To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs. The power dis...

Fuse/Relay Number Fuse Amp Rating Protected Components 92 10A* ABS module, Plant EVAC and fill 93 5A* Rear blower motor, Rear defroster, TTbattery charge relays 94 30A** Passenger compartment fuse panelrun/start 95 — Not used 96 — Not used 97 — Not used 98 — A/C clutch relay *Mini Fuses **Cartridge ...

The fuses are coded as follows: Fuse/Relay Number Fuse Amp Rating Protected Components 1 30A One touch up/down driver side frontwindow 2 15A Not used (spare) 3 30A One touch up/down passenger side frontwindow 4 10A Interior demand lamps (overhead console,2nd row, cargo), glove box lamp, 2nd and3rd r...

Fuse/Relay Number Fuse Amp Rating Protected Components 40 10A Rear park lamps, License plate lamps, TTpark lamps 41 7.5A Overdrive cancel, Tow/haul 42 5A Not used (spare) 43 10A Not used (spare) 44 10A Not used (spare) 45 5A Not used (spare) 46 10A Climate control module 47 15A Fog lamps, left and r...

GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthinessand resale value. There is a large network of Ford authorized dealersthat are there to help you with their professional servicing expertise. Webelieve that their specially trained technicians are best qualifi...

OPENING AND CLOSING THE HOOD 1. Inside the vehicle, pull the hoodrelease handle located under thebottom left corner of the instrumentpanel. 2. Go to the front of the vehicle andrelease the auxiliary latch that islocated under the front center ofthe hood. 3. Lift the hood. Note: Make sure the hood is...

3.5L V6 EcoBoost 姞 Engine A. Engine coolant reservoir B. Brake fluid reservoir C. Battery D. Power distribution box E. Air filter assembly F. Automatic transmission fluid dipstick (out of view) G. Engine oil dipstick H. Engine oil filler cap I. Windshield washer fluid reservoir A B C D E F G H I 330...

Engine shield Some vehicles may be equipped with an aero-shield under the engine.This shield needs to be removed for service, including oil and filterchanges. It is secured with four quick release fasteners. ENGINE OIL DIPSTICK A. – MIN B. – MAX ENGINE OIL CHECK Note: Check the level before starting...

Adding Engine Oil Note: Do not remove the filler cap when the engine is running. Note: Do not add engine oil further than the MAX mark. Oil levels above the MAX mark may cause engine damage. Only use oils certified for gasoline engines by theAmerican Petroleum Institute (API). An oil with thistradem...

Note: Automotive fluids are not interchangeable; do not use engine coolant/antifreeze or windshield washer fluid outside of its specifiedfunction and vehicle location. The concentration and level of engine coolant should be checked at theintervals listed in scheduled maintenance information. If the ...

• In case of emergency, a large amount of water without engine coolantmay be added in order to reach a vehicle service location. In thisinstance, the cooling system must be drained, chemically cleaned withMotorcraft 威 Premium Cooling System Flush, and refilled with prediluted engine coolant as soon ...

If you drive in extremely hot climates: • It may be necessary to have a Ford authorized dealer decrease thecoolant concentration to 40%. • A coolant concentration of 40% will provide improved overheatprotection. Decreased engine coolant concentrations below 40% willdecrease the corrosion/freeze prot...

If you notice any of the following: • the engine coolant temperature gauge moves fully into the red (hot)area • the coolant temperature warning light illuminates • the service engine soon indicator illuminates 1. Pull off the road as soon as safely possible and place the vehicle in P(Park). 2. Leave...

When this occurs the vehicle will still operate. However: • The engine power will be limited. • The air conditioning system will be disabled. Continued operation will increase the engine temperature and the enginewill completely shut down, causing steering and braking effort toincrease. Once the eng...

TRANSMISSION FLUID CHECK 6F35 transmission (if equipped) Note: Transmission fluid should be checked by an authorized dealer. If required, fluid should be added by an authorized dealer. The automatic transmission does not have a transmission fluid dipstick. Refer to your scheduled maintenance informa...

4. Seat the air filter assembly back into the grommets by pushing downon the air filter assembly. 5. Tighten the clamp. 6. Install and tighten two bolts that attach air filter assembly to the frontof the vehicle. 7. Install the bolt cover (if equipped). 8. Reinstall the harness retaining clip into t...

Washer fluids containing non-methanol antifreeze agents should be usedonly if they provide cold weather protection without damaging thevehicle’s paint finish, wiper blades or washer system. CHANGING THE VEHICLE BATTERY WARNING: Batteries normally produce explosive gases which can cause personal inju...

If you see any corrosion on the battery or terminals, remove the cablesfrom the terminals and clean with a wire brush. You can neutralize theacid with a solution of baking soda and water. It is recommended that the negative battery cable terminal bedisconnected from the battery if you plan to store ...

Battery management system The battery management system (BMS) monitors battery conditions andtakes actions to extend battery life. If excessive battery drain isdetected, the system may temporarily disable certain electrical featuresto protect the battery. Those electrical accessories affected includ...

CHECKING THE WIPER BLADES Run the tip of your fingers over the edge of the bladeto check for roughness. Clean the wiper blades with washer fluid or waterapplied with a soft sponge or cloth. CHANGING THE WIPER BLADES 1. Pull the wiper blade and arm away fromthe glass. 2. Squeeze the locking tabs to r...

Changing the rear window wiper blade To replace the rear wiper blade: 1. Press the wiper blade against theglass with one hand and hold it. 2. Pull the wiper arm away from thewiper blade to separate. 3. To attach the new wiper to thewiper arm, align the slot (1) andcross pin (2) and firmly press thew...

Changing the Air Filter Element 3.5L V6 engine 2.0L EcoBoost 威 engine 3.5L V6 EcoBoost 威 engine 1. On the passenger’s side of the air filter housing, release the twoclamps from the air filter housing cover. 2. Lift the passenger’s side of the cover and push the cover toward thepassenger’s side. Rele...

5. Wipe the cover and the housing clean to remove any dirt or debris andto make sure the cover seals to the housing. 6. Install a new air filter element. Be careful not to crimp the filterelement edges between the housing and the cover. This could cause filterdamage and allow unfiltered air to enter...

5. Locate the vertical adjuster foreach headlamp. Using a Phillips #2screwdriver, turn the adjustercontrol either clockwise orcounterclockwise in order to adjustthe vertical aim of the headlamp. Note: HORIZONTAL AIMING IS NOT REQUIRED FOR THISVEHICLE AND ISNON-ADJUSTABLE. CHANGING A BULB Lamp Assemb...

Replacing headlamp bulbs WARNING: Handle a halogen headlamp bulb carefully and keep out of children’s reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause thebulb to break the next time the headlamps are operated. Note: If the bulb is accident...

Front parking lamp/turn signal and sidemarker bulbs 1. Make sure that the headlamp control isin the off position. 2. Open the hood. 3. Remove the hood overslam bumpertower to service park/turn or sidemarkerbulbs (if needed). Replacing front parking lamp/turn signal bulbs 1. Rotate the bulb socketcou...

Replacing fog lamp bulbs 1. Make sure the headlamp switch is off. 1. Make sure that the fog lamp switchis in the off position. 2. Remove the bulb socket from thefog lamp by turning itcounterclockwise. 3. Disconnect the electricalconnector. Reverse steps to reinstall bulb(s). Replacing turn/backup la...

Replacing tail/brake lamp bulbs For bulb replacement, see your authorized dealer. Replacing the License Plate Lamp Bulb 1. Carefully release the spring clip. 2. Remove the lamp. 3. Remove the bulb. Install the new bulb in reverseorder. Replacing high-mount brake lamp bulb Your vehicle is equipped wi...

Function Number of bulbs Trade number Rear license platelamp 1 W5W Front fog lamp 2 H11 Interior front maplamps 2 168 (T10) Second rowdome/courtesy lamp 2 168 (T10) * Second rowdome/map lamp n/a LED * Third row cargolamp n/a LED Visor vanity lamp -Slide on rail system(SOR) 2 A6224PF All replacement ...

WAXING • Wash the vehicle first. • Use a quality wax that does not contain abrasives. • Do not allow paint sealant to come in contact with any non-body(low-gloss black) colored trim, such as grained door handles, roofracks, bumpers, side moldings, mirror housings or the windshield cowlarea. The pain...

If a staining liquid like coffee/juice has been spilled on the instrumentpanel or on interior trim surfaces, clean as follows: 1. Wipe up spilled liquid using a clean, white, cotton cloth. 2. Wipe the surface with a damp, clean, white cotton cloth. For morethorough cleaning, use a mild soap and wate...

• Never apply any cleaning chemical to hot or warm wheel rims orcovers. • Some automatic car washes may cause damage to the finish on yourwheel rims or covers. Industrial-strength (heavy-duty) cleaners, orcleaning chemicals, in combination with brush agitation to removebrake dust and dirt, could wea...

Miscellaneous • Make sure all linkages, cables, levers and pins under vehicle arecovered with grease to prevent rust. • Move vehicles at least 25 feet (8 meters) every 15 days to lubricateworking parts and prevent corrosion. Removing Vehicle from Storage When your vehicle is ready to come out of sto...

GENERAL INFORMATION Notice to Utility Vehicle, Van and Truck Owners WARNING: Utility vehicles have a significantly higher rollover rate than other types of vehicles. To reduce the risk of serious injury or death from a rollover or other crash you must: • Avoid sharp turns and abrupt maneuvers; • Dri...

How Your Vehicle Differs from Other Vehicles SUVs, vans and trucks can differfrom some other vehicles in a fewnoticeable ways. Your vehicle maybe: • Higher – to allow higher loadcarrying capacity and to allow itto travel over rough terrainwithout getting hung up ordamaging underbodycomponents. • Sho...

TIRE CARE Information About Uniform Tire Quality Grading Tire Quality Grades apply to newpneumatic passenger car tires. TheQuality grades can be found whereapplicable on the tire sidewall betweentread shoulder and maximum sectionwidth. For example: • Treadwear 200 Traction AA Temperature A These Tir...

Traction AA A B C WARNING: The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning or peak traction characteristics. The traction grades, from highest to lowest are AA, A, B, and C. Thegrades represent the...

INFORMATION CONTAINED ON THE TIRE SIDEWALL Both U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the sidewall of all tires. Thisinformation identifies and describes the fundamental characteristics ofthe tire and also provides a U.S. DOT Tire Identifi...

E. 15: Indicates the wheel or rim diameter in inches. If you change your wheel size, you will have to purchase new tires to match the new wheeldiameter. F. 95: Indicates the tire’s load index. It is an index that relates to how much weight a tire can carry. You may find this information in yourowner...

Information on T Type Tires T type tires have some additionalinformation beyond those of P typetires; these differences aredescribed below. T145/80D16 is an example of a tiresize. Note: The temporary tire size for your vehicle may be different fromthis example. Tire Quality Gradesdo not apply to thi...

INFLATING YOUR TIRES Safe operation of your vehicle requires that your tires are properlyinflated. Remember that a tire can lose up to half of its air pressurewithout appearing flat. Every day before you drive, check your tires. If one looks lower than theothers, use a tire gauge to check pressure o...

Damage Periodically inspect the tire treads and sidewalls for damage (such asbulges in the tread or sidewalls, cracks in the tread groove andseparation in the tread or sidewall). If damage is observed or suspected,have the tire inspected by a tire professional. Tires can be damagedduring off-road us...

Tire Replacement Requirements WARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus LT-metric or all-season versus all-terrain) as those originallyprovided by Ford. The recommended tire and wheel size may be found oneither t...

Important: Remember to replace the wheel valve stems when the road tires are replaced on your vehicle. It is recommended that the two front tires or two rear tires generally bereplaced as a pair. The tire pressure sensors mounted in the wheels (originally installed onyour vehicle) are not designed t...

Tire and Wheel Alignment A bad jolt from hitting a curb or pothole can cause the front end of yourvehicle to become misaligned or cause damage to your tires. If yourvehicle seems to pull to one side when you are driving, the wheels maybe out of alignment. Have an authorized dealer check the wheelali...

SUMMER TIRES (IF EQUIPPED) Summer tires provide superior performance on wet and dry roads.Summer tires do not have the Mud and Snow (M+S or M/S) tire tractionrating on the tire side wall. Since summer tires do not have the sametraction performance as All-season or Snow tires, Ford does notrecommend ...

TIRE PRESSURE MONITORING SYSTEM WARNING: The tire pressure monitoring system is NOT a substitute for manually checking tire pressure. The tire pressure should be checked periodically (at least monthly) using a tire gauge.See Inflating Your Tires in this chapter. Failure to properly maintain your tir...

telltale after replacing one or more tires or wheels on your vehicle toensure that the replacement or alternate tires and wheels allow theTPMS to continue to function properly. The tire pressure monitoring system complies with part 15 of the FCCrules and with RSS-210 of Industry Canada. Operation is...

To restore the full functionality of the tire pressure monitoring system,have the damaged road wheel and tire assembly repaired and remountedon your vehicle. For additional information, see Changing Tires with a TPMS in this section. When You Believe Your System Is Not Operating Properly The main fu...

Low tirepressurewarning light Possible cause Customer action required Flashingwarning light Spare tire in use Repair the damaged road wheel/tire and reinstall it on the vehicle torestore system functionality. For adescription on how the systemfunctions, see When Your Temporary Spare Tire is Installe...

CHANGING A ROAD WHEEL WARNING: The use of tire sealants may damage your tire pressure monitoring system (TPMS) and should not be used. However, if you must use a sealant, the TPMS sensor and valve stem onthe wheel must be replaced by an authorized Ford dealer. WARNING: See Tire Pressure Monitoring S...

The usage of a full-size dissimilar spare tire and wheel assembly can leadto impairment of the following: • Handling, stability and braking performance • Comfort and noise • Ground clearance and parking at curbs • Winter weather driving capability • Wet weather driving capability • All-wheel driving...

Vehicle Jacking 1. Block the diagonally oppositewheel. 2. Loosen each wheel lug nutone-half turn counterclockwise butdo not remove them until the wheelis raised off the ground. 3. The vehicle jacking points are shown here, and are depicted on theyellow warning label on the jack. Jack at the specifie...

TECHNICAL SPECIFICATIONS Wheel Lug Nut Torque Specifications WARNING: When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum orbrake disc that contacts the wheel. Ensure that any fast...

ENGINE SPECIFICATIONS Engine 3.5L V6 engine 3.5L V6 EcoBoost engine 2.0L EcoBoost engine Cubic inches 213 214 122 Required fuel Minimum 87 octane Minimum 87 octane Minimum 87 octane Firing order 1–4–2–5–3–6 1–4–2–5–3–6 1-3-4-2 Ignitionsystem EDIS Coil on plug Coil on plug Spark pluggap 0.049-0.053 i...

2.0L EcoBoost engine (if equipped with drivebelt routing 1) 2.0L EcoBoost engine (if equipped with drivebelt routing 2) A. Long drivebelt on the first pulley groove closer to the engine B. Short drivebelt on the second pulley groove farther from the engine A B 400 Capacities and Specifications 2013 ...

VEHICLE IDENTIFICATION NUMBER The vehicle identification number islocated on the driver sideinstrument panel. Please note that in the graphic,XXXX is representative of yourvehicle identification number. The Vehicle Identification Number (VIN) contains the followinginformation: A. World manufacturer ...

ACCESSORIES For a complete listing of the accessories that are available for yourvehicle, please contact your dealer or visit our online store at: Accessories.Ford.com (U.S. only). Ford Custom Accessories are available for your vehicle through yourlocal Ford or Ford of Canada dealer. Ford Motor Comp...

Peace of mind • Keyless entry keypad • Cargo shade • Vehicle security systems • Locking gas plug for capless fuel system • Wheel locks • Remote start • Parking sensors* *Ford Licensed Accessories (FLA) are warranted by the accessorymanufacturer’s warranty. Ford Licensed Accessories are fully designe...

FORD ESP EXTENDED SERVICE PLANS (U.S. ONLY) More than 32 million Ford and Lincoln owners have discovered thepowerful protection of Ford ESP. It is the only extended service planbacked by Ford Motor Company, and provides “peace of mind”protection beyond the New Vehicle Limited Warranty coverage. Up t...

FORD ESP EXTENDED SERVICE PLANS (CANADA ONLY) You can get more protection for your vehicle by purchasing a FordExtended Service Plan (ESP). Ford ESP is the only service contractbacked by Ford Motor Company of Canada, Limited. Depending on theplan you purchase, Ford ESP provides benefits such as: • R...

GENERAL MAINTENANCE INFORMATION Why Maintain Your Vehicle? Carefully following the maintenance schedule helps protect against majorrepair expenses resulting from neglect or inadequate maintenance andmay also help to increase the value of your vehicle when you sell ortrade it. Keep all receipts for c...

Protecting Your Investment Maintenance is an investment that will pay dividends in the form ofimproved reliability, durability and resale value. To maintain the properperformance of your vehicle and its emission control systems, it isimperative that scheduled maintenance be completed at the designat...

Oils, Fluids and Flushing In many cases, fluid discoloration is a normal operating characteristicand, by itself, does not necessarily indicate a concern or that the fluidneeds to be changed. However, discolored fluids that also show signs ofoverheating and foreign material contamination should be in...

NORMAL SCHEDULED MAINTENANCE AND LOG Intelligent Oil-Life Monitor 姞 Your vehicle is equipped with an Intelligent Oil-Life Monitor 威 that determines when the engine oil needs to be changed based on how yourvehicle is used. By using several important factors in its calculations, themonitor helps reduc...

Normal Scheduled Maintenance * At every oil changeinterval as indicated bythe information display Change engine oil and filter. ** Rotate tires, inspect tire wear and measuretread depth. Perform multi-point inspection(recommended). Inspect automatic transmission fluid level (ifequipped with dipstick...

Additional Maintenance Items 1 Every 20000 miles(32000 km) Replace cabin air filter (if equipped). Every 30000 miles(48000 km) Replace engine air filter. At 100000 miles(160000 km) Change engine coolant. 2 Every 100000 miles(160000 km) Replace spark plugs. Inspect accessory drive belt(s). 3 Every 15...

Maintenance Schedule Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ...

Special Operating Condition Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D A...

EXCEPTIONS There are several exceptions to the Normal Schedule. They are listedbelow: Normal vehicle axle maintenance: Rear axles and power take-off (PTO) units with synthetic fluid and light-duty trucks equipped withFord-design axles are lubricated for life; do not check or change fluidunless a lea...

Engine air filter & cabin air filter replacement: Engine air filter and cabin air filter life is dependent on exposure to dusty and dirtyconditions. Vehicles operated in these conditions require frequentinspection and replacement of the engine air filter and cabin air filter. ENGINE COOLANT CHAN...

GENERAL INFORMATION Ensure that you review your device’s user guide before using it withSYNC. Support The SYNC support team is available to help you with any questions youcannot answer on your own. Monday-Saturday, 8:30am-8:00pm EST In the United States, call: 1–888–270–1055 In Canada, call: 1–800–5...

When using SYNC, do not: • Operate playing devices if the power cords or cables are broken, splitor damaged. Carefully place cords and cables where they cannot bestepped on or interfere with the operation of pedals, seats,compartments or safe driving abilities. • Leave playing devices in the vehicle...

Phone Options during an Active Call During an active call, you have additional menu features which becomeavailable such as putting a call on hold, joining calls, etc. Use the arrowbuttons to scroll through the menu options. To access:1. Press MENU during an active call.2. When Active Call Menu is se...

When you select: You can: Call History Access your call history log.1. Press OK to select, then scroll through yourcall history options (incoming, outgoing ormissed).2. Press OK when the desired selection appearsin the display.3. Press the phone button to call the selection. Return Exit the current ...

Text Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages.The system can also read incoming text messages to you so that you donot have to take your eyes off the road. Receiving a Text Message Note: This is a phone-dependent feature. ...

Delete All Messages? allows you to delete current text messages from SYNC (not your phone). To delete the messages, press OK to select. Thedisplay indicates when all your text messages have been deleted andSYNC returns you to the text message menu. Note: SYNC does not automatically download all of y...

When you select: You can: Modify Phonebook Modify the contents of your phone book (i.e.,add, delete, download). Press OK to selectand scroll between: Add Contacts: Press OK to add more contactsfrom your phone book. Push the desiredcontact(s) on your phone. See your phone’suser guide on how to push c...

System Settings System Settings provide access to your Bluetooth Devices andAdvanced menu features. Use the arrow buttons to scroll through themenu options. The Bluetooth Devices menu allows you to add, connect, delete and set aphone as primary as well as turn your Bluetooth feature on and off. The ...

If you select: You can: Set Bluetooth On/Off Turn the Bluetooth feature on and off.Press OK and scroll to toggle between On andOff. When the desired selection is chosen,press OK. Note: Turning Bluetooth off disconnects all Bluetooth devices and deactivates allBluetooth features. Delete Device Delete...

SYNC APPLICATIONS AND SERVICES (IF EQUIPPED) Note: In order for the following features to work, your cellular phone must be compatible with SYNC. To check your phone’s compatibility, visitwww.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca. • SYNC Services (if equipped, U.S. only): Provides ...

Vehicle Health Report WARNING: Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. Vehicle Health Report supplements, but cannotreplace normal maintenance and vehicle inspection. Vehicle HealthReport only monitors c...

To run a report using the phone button:1. Press the phone button to enter Phone Menu.2. Scroll until Vehicle Health is selected and press OK.3. Scroll to select from the following options: Vehicle Health Report Options User Preferences:Press OK to selectand enter the menu.Scroll to select from: Auto...

3. While on an active route, you can select or say “Route summary” or “Route status” to view the Route Summary turn list or the RouteStatus ETA. You can also turn voice guidance on or off, cancel theroute or update the route. If you miss a turn, SYNC automatically asks if you want the routeupdated. ...

“USB” “Search song <name>” 1 “Search track <name>” 1,3 “Shuffle off” “Shuffle on” “Similar music” “What’s playing?” 1 “<name>” is a dynamic listing, meaning that it could be the name of any desired group, artist, etc. 2 Voice commands which are only available in folder mode. 3 Voic...

Voice Command Guide “Refine” This allows you to make your previouscommand more specific. For example, if youasked to search and play all music by acertain artist, you could then say “refinealbum” and choose a specific album from thelist to view. If you then select Play, the systemonly plays music fr...

When you select: You can: Select Source SYNC USB: Press OK to access music plugged into your USB port. You can also plugin devices to charge them (if supported byyour device). Once connected, the systemindexes any readable media files. (The timerequired to complete this depends on the sizeof the med...

When you select: You can: Similar Music Play music similar to what is currently playingfrom the USB port. The system uses themetadata information of each song to compilea playlist for you.Press OK to select. The system creates a newlist of similar songs and begins playing. Themetadata tags must be p...

4. Press OK and then scroll to select from: When you select: You can: Add BluetoothDevice * Allows you to pair additional devices to thesystem.1. Press OK to select and press OK againwhen Find SYNC appears in the display.2. Follow the directions in your phone’s userguide to put your phone into disco...

Advanced Menu Options This menu allows you to access settings such as prompts, language,performing a master reset as well as returning to factory defaults.1. Press AUX and then MENU to access the Media Menu.2. Scroll until System Settings appears and select OK.3. Scroll until Advanced appears.4. Pre...

When you select: You can: Master Reset Completely erase all information stored onSYNC (all phonebook, call history, textmessages and all paired devices) and returnto the factory default settings. Application Download new software applications (ifavailable) and then load the desiredapplications throu...

Vehicle Health Report/Services (Traffic, Directions and Information) Issues Issue Possible Cause(s) Possible Solution(s) I received a textthat the VehicleHealth Report isnot activated. • Your account may not beactivated on thewebsite, OR • You may have the wrong VIN(vehicleidentificationnumber) list...

If the icon is yellow, see Alerts in the Information section of this chapter. PHONE Press to select any of the following: • Making and Receiving Calls • Quick Dial • Phonebook • Call History • Text Messaging • Settings NAVIGATION Press to select any of the following: • My Home • Favorites • Previous...

• SOUND: Touch the word to access the Sound menu where you canmake adjustments to settings, such as: Bass, Midrange, Treble,Balance and Fade, THX Deep Note Demo (if equipped), DSP (ifequipped), Occupancy Mode (if equipped), and Speed CompensatedVolume settings. • Hazard flasher: Press the button to ...

Navigation Climate You can make selections from the menu by using the OK button. Theselection menu expands and you are allowed different options. • Press the up and down arrows to scroll through the modes. • Press the right arrow to enter the mode. • Press the left or right arrows to make adjustment...

How to Use Voice Commands with Your System Press the voice icon; after the tone, speak your commandclearly. These commands can be said at any time. “Cancel” “Exit” “Go back” “List of commands” “Main menu” “Next page” “Previous page” “What can I say?” “Help” What Can I Say To access the available voi...

Voice Command List “Navigation list of commands” * “Phone list of commands” “Radio list of commands” “SD card list of commands” “Sirius satellite list of commands” * “Travel link list of commands” * “USB list of commands” “Voice instructions list of commands” “Voice settings list of commands” “Help”...

Phone/Media Candidate Lists: Candidate lists are lists of possible results from your voice commands. The system creates these lists whenit has the same confidence level of several options based on your voicecommand. To access these settings using the touchscreen:1. Press the Settings icon > Setti...

For a complete list of “Browse” voice commands, see USB and SD card voice commands and Bluetooth audio voice commands in the following sections. AM/FM Radio Press the lower left corner of the touchscreen and then selectthe AM or FM tab. To change between AM and FM presets, just touch the AM or FM ta...

HD Radio Reception and Station Troubleshooting Potential Reception Issues Reception area If you are listening to a multicast station andyou are on the fringe of the reception area,the station may mute due to weak signalstrength.If you are listening to HD1, the systemswitches back to the analog broad...

Radio Voice Commands If you are listening to the radio, press the voice button on thesteering wheel control. When prompted, say any of thecommands in the following chart. If you are not listening to the radio, press the voice button and, after thetone, say “Radio”, then any of the commands in the fo...

“TUNE” “FM” “Preset <#>” “FM <87.9–107.9>” “Help” “FM <87.9-107.9> HD <#>” * * If available. SIRIUS 姞 Satellite Radio (If Activated) Press the lower left corner of the touchscreen, then select theSIRIUS tab. When you select: You can: Presets Save a station by pressing and hol...

When you select: You can: Browse View a list of all available stations. Scroll andselect the desired station.You can also lock or skip unwanted channelsor view the song and artist on other stations. Satellite Radio Voice Commands If you are listening to SIRIUS satellite radio, press the voicebutton ...

“TUNE” “SAT” “SAT 1” “SAT 1 preset <#>” “SAT 2” “SAT 2 preset <#>” “SAT 3” “SAT 3 preset <#>” “Help” SIRIUS Satellite Radio Information Note: SIRIUS reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particularchann...

SIRIUS Troubleshooting Tips Radio Display Condition Possible Action Unsubscribed Channel. Subscription not available for thischannel. Contact SIRIUS at1–888–539–7474 tosubscribe to thechannel, or tune toanother channel. No Signal. Loss of signal from theSIRIUS satellite orSIRIUS tower to thevehicle ...

When you select: You can: Scan Hear a brief sampling of all available tracks. More Info See disc information. Options Sound: Adjust Bass, Treble, Midrange, Balance and Fade, THX Deep Note Demo (ifequipped), DSP (if equipped), OccupancyMode (if equipped), and Speed CompensatedVolume settings. Compres...

SD Card Slot and USB Port SD Card Slot Note: Your SD card slot is spring-loaded. To remove the SD card, press the card in and the system ejects it. Do not attempt to pull the card toremove it as this could cause damage. The card slot can be used for your navigation card (if equipped). See Navigation...

SD Card and USB Voice Commands If you are listening to a USB device or an SD card, press thevoice button on the steering wheel control. When prompted, sayany of the commands in the following chart. If you are not listening to a USB device or an SD card, press the voicebutton and, after the tone, say...

“BROWSE” “All audiobooks” “Audiobook <name>” “All authors” “Author <name>” “All composers” “Composer <name>” “All folders” “Folder <name>” “All genres” “Genre <name>” “All movies” * “Playlist <name>” “All music videos” * “Podcast <name>” “All playlists” “TV ...

Bluetooth Voice Commands “Browse album <name>” “Browse composer <name>” “Play genre <name>” “Browse all albums” “Browse folder <name>” “Play playlist <name>” “Browse all artists” “Browse genre <name>” “Play podcast episode <name>” “Browse all audiobooks” ”Br...

Making Calls Press the voice button. When prompted, say “Call <name>” orsay “Dial”, then the desired number. To end the call or exit phone mode, press and hold the phonebutton. Receiving Calls During an incoming call, an audible tone sounds. Call informationappears in the display if it is avai...

When you select: You can: Phonebook Access and call any contacts in yourpreviously downloaded phone book. Thesystem places the entries in alphabeticalcategories summarized at the top of thescreen.To turn on contact picture settings (if yourdevice supports this feature), press Phone >Settings >...

Text Messaging Note: Downloading and sending text messages using Bluetooth are phone-dependent features. Note: Certain features in text messaging are speed-dependent and cannot be completed when the vehicle is traveling at speeds over 5 mph(8 km/h). Note: SYNC does not download read text messages fr...

You can then preview the message and verify the recipient as well asupdate the message list and send it to a connected device (i.e., USBdrive). Pre-defined Text Message Options I’ll call you back in a few minutes. I just left, I’ll be there soon. Can you give me a call? I’m on my way. I’m running a ...

Phone Settings Press Phone > Settings, then select from the following settings: If you select: You can: Bluetooth Devices Connect, disconnect, add or delete a device,as well as save it as a favorite. Bluetooth Turn Bluetooth on or off. Do Not Disturb Have all calls go directly to your voice maila...

SYNC Services Voice Commands When a route has been downloaded (non-navigation systems),press the voice button on the steering wheel control. Whenprompted, say any of the following commands: “SERVICES” “Cancel route” “Navigation voice off” “Navigation voice on” “Next turn” “Route status” “Route summa...

Press the Information button and then select Travel Link, thenchoose from any of the following services: When you select: You can: Traffic On Route Identify traffic incidents on your route, nearbyyour vehicle’s current location or near any ofyour favorite places (if programmed). Traffic Nearby Fuel ...

Vehicle Health Report (If Equipped, U.S. Only) WARNING: Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. Vehicle Health Report supplements, but cannotreplace, normal maintenance and vehicle inspection. Vehicle He...

Making a Report To run a report by touchscreen, touch the Information button >Apps > Vehicle Health Report. To run a report by voice command, press the voice button onthe steering wheel and, when prompted, say “Vehicle healthreport”. Vehicle Health Report Privacy Notice When you run a Vehicle ...

Display You can make adjustments to the touchscreen display through thetouchscreen or by pressing the voice button on your steering wheelcontrols and when prompted, say “Display settings”. Press the Settings icon > Display, then select from the following: Brightness allows you to make the screen ...

Vehicle Press the Settings icon > Vehicle, then select from the following: • Active Park Assist • Ambient Lighting • Vehicle Health Report • Door Keypad Code • Rear View Camera • Enable Valet Mode. Active Park Assist (If Equipped) When activated, your system displays directions for you regarding ...

Enable Valet Mode Note: If you are locked out and need to reset the PIN, you can enter 3681 and the system unlocks. Valet mode allows you to lock the system so that none of yourinformation on the system can be accessed until it is unlocked with thecorrect PIN.1. Press the Settings icon > Vehicle ...

Media Player Press the Settings icon > Settings > Media Player, then select from thefollowing: Media Player Autoplay With this feature on, the system automaticallyswitches to the media source upon initialconnection and you can listen to music whichhas already been randomly indexed duringthe in...

Navigation Press the Settings icon > Settings > Navigation, then select from thefollowing: Navigation Map Preferences Turn breadcrumbs on and off. Have the system display your turn list top tobottom or bottom to top. Turn the Parking POI notification on and off. Route Preferences Have the syst...

Wireless & Internet Your system has a Wi-Fi feature which creates a wireless network withinyour vehicle, thereby allowing other devices (i.e., personal computers orphones) in your vehicle to speak to each other, share files, play games,etc. Using this Wi-Fi feature, everyone in your vehicle can ...

Wireless & Internet USB MobileBroadband Instead of using Wi-Fi, your system can alsouse a USB mobile broadband connection toaccess the internet. (You must activate yourmobile broadband device on your PC prior toconnecting it to the system.) This screenallows you to set up what is your typical ar...

Help Press the Settings icon > Help, then select from the following: Help Where Am I? View the vehicle’s current location, if yourvehicle is equipped with navigation. If yourvehicle is not equipped with navigation,nothing is displayed. System Information View the following information: Touchscree...

CLIMATE CONTROLS Depending on your vehicle line and option package, yourclimate screen may look different than what is shown here. A. Power: Touch to turn the system on and off. Outside air cannot enter the vehicle when the system is off. B. Passenger settings: • Touch DUAL to turn on the passenger ...

“TEMPERATURE” “High” “Low” “<15.5–29.5> degrees” “<60–85> degrees” “Help” NAVIGATION SYSTEM (IF EQUIPPED) Note: The navigation SD card must be in the SD card slot to operate the navigation system. If you need a replacement SD card, see yourauthorized dealer. Note: The SD card slot is spr...

This screen displays the POI icon, such as: Hotel Coffeehouse Food & Drink Nightlife Attraction This icon appears when your selection exists in multiplecategories within the system. When you are viewing additional information for hotels, cityseekr alsotells you if the hotel has certain services ...

Auto Zoom Press the green bar to access map mode, then select the + or - zoombutton to bring up the zoom level and Auto buttons on the touchscreen.When the Auto button is pressed, Auto Zoom is turned on and Auto isdisplayed in the bottom left corner of the screen. The map zoom levelthen synchronizes...

“NAVIGATION” “Zoom street” “Zoom to <distance>” “Help” * If you have said, “Destination”, you may say any of the commands in the Destination chart. One-shot Destination Street Address If your vehicle is equipped with the SD card navigation feature, you havethe ability to enter in a street addr...

GENERAL INFORMATION SYNC 姞 End User License Agreement (EULA) • You have acquired a device (“DEVICE”) that includes software licensed by FORD MOTOR COMPANY from an affiliate of MicrosoftCorporation (“MS”). Those installed software products of MS origin, aswell as associated media, printed materials, ...

SOFTWARE’s ability to use WMDRM to play or copy protectedcontent. This action does not affect unprotected content. When yourDEVICE downloads licenses for protected content, you agree thatMicrosoft may include a revocation list with the licenses. Contentowners may require you to upgrade the SOFTWARE ...

property rights in and to the content which may be accessed through useof the SOFTWARE is the property of the respective content owner andmay be protected by applicable copyright or other intellectual propertylaws and treaties. This EULA grants you no rights to use such content.All rights not specif...

End user notice Microsoft 姞 Windows 姞 Mobile for Automotive Important Safety Information This system Ford SYNC™ contains software that is licensed toManufacturer FORD MOTOR COMPANY by an affiliate of MicrosoftCorporation pursuant to a license agreement. Any removal, reproduction,reverse engineering ...

licenses or other rights which are not expressly granted in this Agreementare intended to, or shall be, granted or conferred by implication, statute,inducement, estoppel or otherwise, and TeleNav and its suppliers andlicensors hereby reserve all of their respective rights other than thelicenses expl...

INABILITY TO USE THIS DATA, ANY DEFECT IN THIS DATA, OR THEBREACH OF THESE TERMS OR CONDITIONS, WHETHER IN ANACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVENIF NT OR ITS LICENSORS HAVE BEEN ADVISED OF THEPOSSIBILITY OF SUCH DAMAGES. Some States, Territories andCountries do not allow certain l...

furnished shall be marked and embedded as appropriate with thefollowing “Notice of Use”, and be treated in accordance with such Notice: NOTICE OF USE CONTRACTOR (MANUFACTURER/ SUPPLIER) NAME: NAVTEQ CONTRACTOR (MANUFACTURER/SUPPLIER) ADDRESS: 425 West Randolph Street, Chicago, IL 60606. This Data is...

911 Assist™ ......................449, 523 A ABS (see Brakes) .....................236 Accessing and using your USBport ............................................503 Accessing call history/phonebook during active call .............439 Accessing your calendar ..........523 Accessing your media menu...