Ford 2013 Expedition v.3- Manuals

Symbol Description Symbol Description Symbol Description Heated rearwindow Interiorluggagecompartmentrelease Jack Lightingcontrol Low tirepressurewarning Maintaincorrect fluidlevel Panic alarm Parking aidsystem Parkingbrake system Powersteering fluid Powerwindowsfront andrear Powerwindowlockout Serv...

Note: Including to the extent that any law pertaining to Event DataRecorders applies to SYNC® or its features, please note thefollowing: Once 911 Assist (if equipped) is enabled (set ON), 911Assist may, through any paired and connected cell phone, discloseto emergency services that the vehicle has b...

FORD CREDIT (U.S. ONLY) Ford Credit offers a full range of financing and lease plans to help youacquire your vehicle. If you have financed or leased your vehicle throughFord Credit, thank you for your business. For your convenience, we offer a number of ways to contact us, as wellas help manage your...

SPECIAL NOTICES New Vehicle Limited Warranty For a detailed description of what is covered and what is not covered byyour vehicle’s New Vehicle Limited Warranty, see the warrantyinformation that is provided to you along with your owner’s manual. Special Instructions For your added safety, your vehic...

WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We recommend against the use of ...

GENERAL INFORMATION See the following sections for directions on how to properly use safetyrestraints for children. WARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be bought separately from your v...

Recommendations for Safety Restraints for Children Child size, height, weight, orage Recommendedrestraint type Infants ortoddlers Children weighing 40 lb (18 kg) orless (generally age four oryounger). Use a child safetyseat (sometimescalled an infantcarrier, convertibleseat, or toddler seat). Smallc...

Note: The child seat must rest tightly against the vehicle seat upon which it is installed. It may be necessary to lift or remove the headrestraint. See the Seats chapter for information on head restraints. BOOSTER SEATS WARNING: Never place, or allow a child to place, the shoulder belt under a chil...

Types of Booster Seats • Backless booster seats If your backless booster seat has a removable shield, remove the shield.If a vehicle seating position has a low seat back or no head restraint, abackless booster seat may place your child’s head (as measured at thetops of the ears) above the top of the...

If the booster seat slides on the vehicle seat upon which it is being used,placing a rubberized mesh sold as shelf or carpet liner under the boosterseat may improve this condition. Do not introduce any item thicker thanthis under the booster seat. Check with the booster seat manufacturer’sinstructio...

10. Before placing the child in theseat, forcibly move the seat forwardand back to make sure the seat issecurely held in place. To check this, grab the seat at the belt path and attempt to move it sideto side and forward and back. There should be no more than 1 inch (2.5centimeters) of movement for ...

Your vehicle has LATCH lower anchors for child seat installation at theseating positions marked with the child seat symbol. The LATCH anchors are located at the rear section of the rear seatbetween the cushion and seat back, below the locator symbols on theseat back. Follow the child seat manufactur...

• Second row bench seat • Second row bucket seats Attach the tether strap only to the appropriate tether anchor as shown.The tether strap may not work properly if attached somewhere otherthan the correct tether anchor. Once the child safety seat has been installed using either the safety belt,the lo...

4. Rotate the tether strap, and clipthe tether strap to the anchor onthe seat frame. 5. Rotate the tether strap clip. 6. Tighten the child safety seat tether strap according to themanufacturer’s instructions. Third row center seating position 1. Route the child safety seat tether strap over the back...

4. Tighten the child safety seattether strap according to themanufacturer’s instructions. If thesafety seat is not anchored properly,the risk of a child being injured in acrash greatly increases. If your child restraint system isequipped with a tether strap, andthe child restraint manufacturerrecomm...

PRINCIPLES OF OPERATION WARNING: Always drive and ride with your seat back upright and the lap belt snug and low across the hips. WARNING: To reduce the risk of injury, make sure children sit where they can be properly restrained. WARNING: Never let a passenger hold a child on his or her lap while t...

FASTENING THE SAFETY BELTS The front outboard and rear safety restraints in your vehicle arecombination lap and shoulder belts. 1. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) until you hear a snap and feelit latch. Make sure the tongue i...

Pregnant women should alwayswear their safety belts. The lap beltportion of a combination lap andshoulder belt should be positionedlow across the hips below the bellyand worn as tight as comfort willallow. The shoulder belt should bepositioned to cross the middle ofthe shoulder and the center of the...

Automatic Locking Mode In this mode, the shoulder belt is automatically pre-locked. The belt willstill retract to remove any slack in the shoulder belt. The automaticlocking mode is not available on the driver safety belt. When to Use the Automatic Locking Mode This mode should be used any time a ch...

SAFETY BELT HEIGHT ADJUSTMENT WARNING: Position the safety belt height adjusters so that the belt rests across the middle of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness of the seat beltand increase the risk of injury in a crash. Adjust the height of the s...

To adjust the comfort guide: 1. Slip the shoulder belt into thebelt guide (the portion of the beltbetween the latch tongue and theD-ring, not the portion where thebelt exits from the quarter trimpanel). 2. Slide the guide up or down along the webbing so that the belt iscentered on the occupant’s sho...

Deactivating and Activating the Belt-Minder® Feature WARNING: While the design allows you to deactivate your Belt-Minder, this system is designed to improve your chances of being safely belted and surviving an accident. We recommend you leavethe Belt-Minder system activated for yourself and others w...

CHILD RESTRAINT AND SAFETY BELT MAINTENANCE Inspect the vehicle safety belts and child safety seat systems periodicallyto make sure they work properly and are not damaged. Inspect thevehicle and child seat safety belts to make sure there are no nicks, tearsor cuts. Replace if necessary. All vehicle ...

Note: You will hear a loud bang and see a cloud of harmless powdery residue if an airbag deploys. This is normal. The airbags inflate and deflate rapidly upon activation. After airbagdeployment, it is normal to notice a smoke-like, powdery residue or smellthe burnt propellant. This may consist of co...

How does the Restraint Safety System work? The Restraint Safety System can adapt the deployment strategy of yourvehicle’s safety devices according to crash severity and occupantconditions. A collection of crash and occupant sensors providesinformation to the restraints control module. During a crash...

The driver and front passengerairbags will deploy during significantfrontal and near frontal crashes. The driver and passenger front airbag system consists of: • driver and passenger airbag modules • crash sensors and monitoring system with readinessindicator. See Crash Sensors and Airbag Indicator ...

SAFETY CANOPY® CURTAIN AIRBAGS WARNING: Do not place objects or mount equipment on or near the headliner at the siderail that may come into contact with a deploying curtain airbag. Failure to follow these instructions mayincrease the risk of personal injury in the event of a crash. WARNING: Do not l...

CRASH SENSORS AND AIRBAG INDICATOR WARNING: Modifying or adding equipment to the front end of your vehicle (including frame, bumper, front end body structure and tow hooks) may affect the performance of the airbag system,increasing the risk of injury. Do not modify the front end of yourvehicle. Your...

The fact that the safety belt pretensioners or airbags did not activate forboth front seat occupants in a crash does not mean that something iswrong with the system. Rather, it means the restraints control moduledetermined the accident conditions (for example, crash severity, beltusage) were not app...

GENERAL INFORMATION ON RADIO FREQUENCIES This device complies with part 15 of the FCC Rules and with IndustryCanada license-exempt RSS standard(s). Operation is subject to thefollowing two conditions: (1) This device may not cause harmfulinterference, and (2) This device must accept any interference...

Note: Your vehicle’s keys were issued with a security label thatprovides important vehicle key cutinformation. Keep the label in a safeplace for future reference. Replacing the Battery Note: Refer to local regulations when disposing of transmitter batteries. Note: Do not wipe off any grease on the b...

Press the unlock button on the remote control to recall the memorypositions. If the easy entry and exit feature is enabled, the seat will moveto the easy entry position. The seat will move to the driver memoryposition when the key is put in the ignition. Programming Memory to the Remote Control 1. S...

REPLACING A LOST KEY OR REMOTE CONTROL You can purchase replacement or additional keys or remote controls froman authorized dealer. A dealer can program the transmitters to yourvehicle or you may be able to program them yourself. See the Security chapter for information on programming your transmitt...

PRINCIPLES OF OPERATION MyKey allows you to program keys with restricted driving modes topromote good driving habits. All but one of the keys programmed to thevehicle can be activated with these restricted modes.Any keys that have not been programmed are referred to asadministrator keys or admin key...

• Audio system maximum volume of 45%. A message will be shown inthe display when you attempt to exceed the limited volume. Also, thespeed-sensitive or compensated automatic volume control will bedisabled. • Always on setting. When this is selected, you will not be able to turnoff AdvanceTrac (if you...

Vehicles With Ford-approved Aftermarket Remote Start Systems When using a Ford-approved aftermarket remote start system, thevehicle recognizes the remote start system as an additional admin key. Itis the vehicle’s default setting. You can also program the remote start asa MyKey. As a result, the MyK...

The following information may help customers who choose to install a non-Ford-approved remote start system. The actions provided below donot make MyKey compatible with non-Ford-approved remote startsystems, but may help you retain some MyKey functions. When using a non-Ford-approved remote start sys...

LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lockand unlock your vehicle. Power Door Locks The power door lock control is located on the driver and front passengerdoor panels. A. Unlock B. Lock Remote Control You can use the remote control anytime your vehic...

Power Liftgate or Liftgate Window (If Equipped) WARNING: Make sure all persons are clear of the power liftgate area before using the control. WARNING: Make sure to close and latch the liftgate to prevent drawing exhaust fumes into your vehicle. This will also prevent passengers and cargo from fallin...

Autolock and Unlock The autolock feature will lock all the doors, the liftgate and the liftgatewindow when: • all doors are closed, • the ignition is on, • you shift into any gear putting the vehicle in motion, and • the vehicle attains a speed greater than 12 mph (20 km/h). If the vehicle was autol...

WARNING: Keep keys out of the reach of children. Do not allow children to operate the power liftgate, or to play near to an open or moving power liftgate. Note: Cycling the ignition prior to completely latching the liftgate could result in damage to the liftgate or its power components. Make sure th...

To open or close with the remote control: Press the remote control button twice within three seconds. To open with the outside liftgatebutton (manual actuation): 1. Unlock the liftgate with theremote entry transmitter or powerdoor unlock control. 2. Press the control button locatedon the inside of t...

Liftgate Ajar Signal If the liftgate or liftgate glass are not fully latched, you will receive amessage on the instrument panel. If you see this message, check boththe liftgate glass and liftgate door to ensure they are fully latched. Liftgate Window To open the liftgate window, pressthe button in t...

To program additional personal entry codes, repeat Steps 1–3, then forStep 4: • press 3 • 4 to save personal entry code 2, or • press 5 • 6 , 7 • 8 , or 9 • 0 to save personal entry code 3. Tips: • Do not set a code that uses five of the same number. • Do not use five numbers in sequential order. • ...

Replacement Keys Note: Your vehicle may come with two integrated keyhead transmitters. The integrated keyhead transmitter functions as a programmed ignitionkey that operates all the locks and starts the vehicle, as well as a remotecontrol. If your programmed transmitters or standard SecuriLock coded...

7. After three seconds but within 20 seconds of turning the ignition offand removing the previously programmed coded key, insert the newunprogrammed key into the ignition. 8. Turn the ignition from off to on. Keep the ignition on for at least sixseconds. 9. Remove the newly programmed coded key from...

Disarming the Alarm To disarm the alarm, do any of the following: • Press the power door unlock button within the 20-second pre-armedmode. • Press the unlock button on the remote control. • Unlock the doors with the keyless entry pad. • Turn the ignition on with a valid key. • Press the panic button...

ADJUSTING THE STEERING WHEEL WARNING: Do not adjust the steering wheel when your vehicle is moving. 1. Pull and hold the steering wheelrelease lever. 2. Adjust the steering wheel to thedesired position then release thelever. AUDIO CONTROL A. Media B. Volume up C. Volume down D. Seek down or previous...

VOICE CONTROL (IF EQUIPPED) A. Voice recognition B. Phone mode Press OK to confirm selection. See the SYNC or Navigation System chapter. CRUISE CONTROL See the Cruise Control chapter. B A + SET RES OFF ON 82 Steering Wheel 2013 Expedition (exd) Owners Guide gf, 3rd Printing, April 2013USA (fus)

ADJUSTABLE PEDALS (IF EQUIPPED) WARNING: Never adjust the accelerator and brake pedal with feet on the pedals while the vehicle is moving. The control is located on the left side of the steering column. Press andhold the appropriate control to move the pedals. A. Closer B. Farther The pedal position...

WINDSHIELD WIPERS Note: Fully defrost the windshield before turning on the windshield wipers. Note: Make sure the windshield wipers are turned off before entering a car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears. If that does not resolve the issue, ins...

LIGHTING CONTROL Rotate the control clockwise to thefirst position to turn on the parkinglamps. Rotate the control clockwise to thesecond position to turn on theheadlamps. Rotate the control to the verticalposition to turn the headlamps off. High Beams • Push the lever toward theinstrument panel to ...

AUTOLAMPS The autolamp system provides lightsensitive automatic on/off control ofthe exterior lights normallycontrolled by the headlamp control. The autolamp system also keeps thelights on for approximately20 seconds or, if equipped with amessage center, you can select adelay from 0–180 seconds afte...

DAYTIME RUNNING LAMPS (IF EQUIPPED) WARNING: Always remember to switch your headlamps on in low light situations or during inclement weather. The system does not activate the tail lamps and may not provide adequate lightingduring these conditions. Failure to activate your headlamps under thesecondit...

INTERIOR LAMPS Front Row Map Lamps (If Equipped) To turn on the map lamps, press theouter edge of the clear lens. Thefront row map lamp lights when: • any door is opened. • the instrument panel dimmerswitch is rotated until the courtesylamps come on. • the remote entry controls are pressed and the i...

Rear Cargo Lamp The rear cargo lamp lights when: • any door is opened, and theswitch is in the middle position. • the instrument panel dimmerswitch is rotated until thecourtesy lamps come on. • any of the remote entry controlsare pressed and ignition is off(and switch is in the middleposition). With...

POWER WINDOWS WARNING: Do not leave children unattended in your vehicle and do not let them play with the power windows. They may seriously injure themselves. WARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in the ...

Pull up the window switch and hold within two seconds of the windowreaching the bounce-back position. The window will travel up with nobounce-back protection. The window will stop if your release the switchbefore the window is fully closed. Window Lock A. Unlock B. Lock Press the control to lock or ...

Integrated Blind Spot Mirrors WARNING: Objects in the blind spot mirror are closer than they appear. Blind spot mirrors have an integrated convex mirror built into the upperoutboard corner of the exterior mirrors. They are designed to assist youby increasing visibility along the side of your vehicle...

GAUGES Cluster shown in standard measure. Metric similar. A. Tachometer B. Battery voltage gauge: C. Engine oil pressure gauge D. Speedometer E. Fuel gauge F. Information display. See Information displays for more information. G. Engine coolant temperature gauge Battery Voltage Gauge Indicates the b...

Engine Oil Pressure Gauge Indicates engine oil pressure. The needle should stay in the normaloperating range. If the needle falls below the normal range, stop thevehicle, turn off the engine and check the engine oil level. Add oil ifneeded. If the oil level is correct, have your vehicle checked at y...

Note: Some warning indicators appear in the information display and function the same as a warning lamp but do not display when you startyour vehicle. Airbag – Front If it fails to illuminate on startup, continues to flash or remainson, it indicates a malfunction. Have the system checked by yourauth...

High Beam It will illuminate when the headlamp high beam is switched on. It will flash when you use the headlamp flasher. Low Fuel Level It will illuminate when the fuel level is low or near empty.Refuel as soon as possible. Low Tire Pressure Warning It will illuminate when your tire pressure is low...

Service Engine Soon The service engine soon indicator light illuminates when the ignition is first turned to the on position to check the bulb and toindicate whether the vehicle is ready for Inspection/Maintenance (I/M) testing. Normally, the “service engine soon” light will stay on until theengine ...

4X4 Illuminates when four-wheel drive high is engaged. If the lightfails to display when the ignition is turned on, or remains on,have the system serviced immediately by your authorizeddealer. 4X4 LOW Illuminates when four-wheel drive low is engaged. If the lightfails to display when the ignition is...

GENERAL INFORMATION WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We recommend...

• MILES (km) TO E: This displays an estimate of approximately how faryou can drive with the fuel remaining in your tank under normaldriving conditions. Remember to turn the ignition off when refuelingto allow this feature to correctly detect the added fuel. Distance toempty is calculated using a run...

3. Press and hold the SELECT/RESET stem to get into the setup menu.Repeatedly press it again to scroll through the setup menu until themessage center displays COMPASS ZONE XX. 4. Press and hold the SELECT/RESET stem for approximately twoseconds to go to the next zone, then release. 5. Press and hold...

Information Display Controls (Type 2) • Press the INFO button to scrollthrough trip, fuel usage, andMyKey® information. • Press the SETUP button to scrollthrough various vehicle featuresettings. • Press the RESET button tochoose settings, reset informationand confirm messages. Info Press the INFO bu...

is not the same as the average fuel economy display. The runningaverage fuel economy is re-initialized to a factory default value if thebattery is disconnected. • AVG MPG (L/100km): Average fuel economy displays your average fueleconomy in miles/gallon or liters/100 km. • MPG (L/km): This displays i...

INFORMATION MESSAGES Note: Depending on the vehicle options equipped with your vehicle, not all of the messages will display or be available. Certain messages may beabbreviated or shortened depending upon which cluster type you have. Press the RESET button for Type 1 displays or the OK button for Ty...

MyKey® Messages Action / Description VEHICLE SPEED80 MPH MAX Displayed when a MyKey® is in use and theAdmin has enabled the MyKey speed limit andthe vehicle speed is 80 mph (130 km/h). CHECK SPEEDDRIVE SAFELY Displayed when a MyKey® is in use and theoptional setting is on and the vehicle exceedsa pr...

Tire Messages Action / Description TIRE PRESSURESENSOR FAULT Displayed when a tire pressure sensor ismalfunctioning, or your spare tire is in use.For more information on how the systemoperates under these conditions refer to the Tire Pressure Monitoring System in the Wheels and Tires chapter for mor...

GENERAL INFORMATION Radio Frequencies and Reception Factors AM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Canadian Radio and TelecommunicationsCommission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.9–107.7, 107.9 MHz Radio reception...

MP3 Track and Folder Structure Audio systems capable of recognizing and playing MP3 individual tracksand folder structures work as follows: • There are two different modes for MP3 disc playback: MP3 trackmode (system default) and MP3 folder mode. • MP3 track mode ignores any folder structure on the ...

AM/FM/CD WITH SYNC® WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We recommend...

J. Folder: Press this button to access the next folder on an MP3 disc. K. Folder: Press this button to access the previous folder on an MP3 disc. L. FF: Press this button to manually fast forward in a CD track or MP3 file. M. REW: Press this button to manually rewind in a CD track or MP3 file. N. Me...

A. Headphone/Speaker Press this button to turn the rear speakers on (Single Play mode) or off (Dual Play mode). B. MEDIA Press this button to scroll through available playing media, such as AM, FM1, FM2, CD, SAT1, SAT2, SAT3, DVD and SYNC. • If in Dual Play mode, SHARED illuminates in the audio disp...

Switching Off Dual Play Mode Use any one of the following to switch off Dual Play mode: • Press the 2 and 4 memory preset buttons simultaneously again. • Press the 3 and 5 memory preset buttons simultaneously to LOCKthe rear seat controls. • Press the headphone/speaker button again. Using Dual Play ...

USB PORT (IF EQUIPPED) WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We recomm...

How to use the FM Transmitter 1. Switch on the system and place a disc in Monitor A.2. Point the remote control at the monitor, and then press DVD A.3. Press SOUND AROUND ON/OFF to turn FM transmission off and on. 4. Select a radio frequency (88.3, 88.7, 89.1, 89.5, 89.9, and 90.3MHz) by pressing SO...

L. POWER: Press this button to turn the system off and on. M. TFT LCD panel: Seven-inch TFT LCD panel. N. Level lock and release latch: Use this latch to change the viewing angle of the LCD panel or lock the panel into the secured position. O. Infrared sensor - forward sensor eye: This allows the re...

Button Function Descriptions Note: The remote control only operates this device. It is not a universal remote control and does not control other equipment. 1. SOURCE: Press this button to use any equipment connected to the audio/video inputs. Each time you press the button, the sourcechanges in the ...

8. CH + and CH -: • In DVD mode, press these buttons to move the select bar to itemsamong the menu or file list. • In TV mode, press these buttons to go to the next channel orprevious channel. • In on-screen display mode, press these buttons to change thesetting of a selected item. 9. VOL + and VOL ...

DVD Basics To get the most use out of each DVD, make sure you read this sectioncompletely. Regional Coding Both the DVD player and disc have specific region codes. These regionalcodes must match in order for the disc to play. If the codes do notmatch, the disc does not play. The system is set to the...

• Do not use any irregularly shaped discs. If you insert an irregular,non-round, shaped disc, it may jam in the DVD player or not playproperly. How to Use the DVD On-screen Display Menus You can use the on-screen display menu screen to adjust all the settingson your screen. General Setup Press SETUP...

The Speaker Setup menu has the following options: • LT/RT • Stereo • V SURR • OFF The Dolby Digital Setup menu has the following options: • Stereo • L-Mono • R-Mono • Mix-Mono Quality Setup Press SETUP on the remote control, and then use CH +, CH -, VOL + and VOL - to navigate the Setup Page. Press ...

Subtitle This allows the user to turn the subtitles on and off in the selectedlanguage for playback automatically. Disc Menu This allows the user to control the DVD disc menu in the selectedlanguage. Parental This section of the Setup Menu allows user to control the content ofmovie playback from G t...

Playing an Audio CD When playing an audio CD, the DISPLAY banner appears automatically. Itdisplays the current track and the amount of time the track has beenplaying, the total amount of time on the disc and the current timerunning on the disc. Press DISPLAY on the remote control to see the DISPLAY ...

Selecting a Play Mode You can choose what order the songs play on a disc temporarily. TheFOLDER play mode is the default. To access the play mode operations,press REPEAT on the remote control. The play mode options are: • Single: Play a selected song. • Repeat One: Repeat the song that is playing. •...

Connecting an MP3 Device Using a USB Cable Plug the MP3 Dock Connector to USB cable into a high-power USB porton your DVD-headrest module, and then connect the other end to theplayer. See the documentation that came with your device for more information. Charging the MP3 Player Battery After you tur...

Compliance Information FCC Notice This device has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmfulinterference in a residential installation. This device genera...

MANUAL HEATING AND AIR CONDITIONING SYSTEM WITHOUTAUXILIARY CLIMATE CONTROL A. Fan speed control: Controls the volume of air circulated in your vehicle. Turn to select the desired fan speed or switch off. If you switchthe fan off, the windshield may fog up. B. Temperature control: Controls the tempe...

Distributes air through the floor vents. Distributes air through the windshield defroster vents, demistervents and floor vents. Distributes air through the windshield defroster vents anddemister vents. This setting can also be used to defog and clearthe windshield of a thin covering of ice. D. Auxil...

When this button is pressed, the display only shows the rear temperaturesetting. After the rear setting changes are completed on the frontcontrol, the display automatically shows both climate settings. F. Passenger temperature control: Press and turn to increase or decrease the air temperature on th...

F. REAR (temperature control): Press to turn on the auxiliary climate control system and to set the desired rear temperature with the frontcontrol. The rear temperature is the same as the front temperature whenonly the center rear temperature bar is lit. The rear temperature isdifferent from the fro...

Distributes air through the floor vents. Distributes air through the windshield defroster vents, demistervents and floor vents. Distributes air through the windshield defroster vents anddemister vents. This setting can also be used to defog and clearthe windshield of a thin covering of ice. N. Drive...

AUXILIARY CLIMATE CONTROL (IF EQUIPPED) Your auxiliary climate controls are located on the rear of the centerconsole and can be used when REAR has been pressed on the frontclimate control system. The temperature is set by the front controls. Usethe rear control to adjust the fan speed or turn the au...

Recommended settings for cooling:1. Select Panel/Floor.2. Select A/C. 3. Adjust the temperature control to maintain comfort. If your vehicle stationary for extended periods during extreme highambient temperatures • Select MAX A/C. For maximum cooling performance, turn the air distribution control to...

For maximum cooling performance in manual override control:1. Choose Panel, A/C, and recirc controls.2. Set the temperature to LO.3. Set the fan to the highest blower setting. To aid in side window defogging and demisting in cold or humid weather:1. Select Panel/Floor.2. Select A/C. 3. Adjust the te...

SITTING IN THE CORRECT POSITION WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the passenger sensing system, resulting in serious injury or death in acrash. Always sit upright against your seat back, with your f...

Adjusting the Head Restraint Raise: Pull up the head restraint. Lower: 1. Press and hold button C. 2. Push down on the head restraint. Remove: 1. Pull up the head restraint until it reaches the highest adjustmentposition. 2. Press and hold buttons C and D. 3. Pull up the head restraint. Reinstall Al...

The non-adjustable head restraintsconsist of: • a trimmed energy absorbing foamand structure (A), • and a fold strap (B). 1. Pull the fold strap to fold the head restraint. 2. Pull up on the head restraint to place the head restraint back to theupright position. MANUAL SEATS WARNING: Do not adjust t...

Power Lumbar (If Equipped) The control is located on theoutboard side of the seat. Press theforward or rearward side of thecontrol for more or less support. MEMORY FUNCTION (IF EQUIPPED) This feature will save and recall the positions of the driver seat, powermirrors and adjustable pedals. The memor...

Heated and Ventilated Seats Air Filter Replacement (If Equipped) The heated and ventilated seat system includes air filters. You mustreplace them periodically. See scheduled maintenance information for more information. There is a filter located under each front seat. You can access the filterfrom t...

REAR SEATS Folding Down the 2nd Row 40% Seat System WARNING: Use caution when folding the seat back to the flat back position as the system will move forward when you lift the release handle. WARNING: Before returning the seat back to its original position, make sure that cargo or any objects are no...

2. Locate handle on the side of theseat cushion by the door. 3. Pull up on the handle and pushthe seat back forward toward thefront of the vehicle. To return the seat to the upright position: 1. Lift the seat back toward the rearof the vehicle. 2. Rotate the seat back until youhear a click, locking ...

Placing the Second Row Outboard 40% Seats in Cargo Mode WARNING: Use caution when folding the seat back to the flat back position as the system will move forward when you lift the release handle. WARNING: Always return the seat from the kneel position prior to raising the seat back. Failure to do so...

Returning to the upright position from full lowered load floorposition You cannot return the seat back to the upright position until the seat isreturned from the kneel down position. To return the seat to the uprightposition: 1. Push the seat rearward until thelatch is engaged. 2. Return the seat ba...

The heated seats only operate when the ignition is on. To operate theheated seats: Press the heated seat button to cycle through the variousheat settings and off. Warmer settings are indicated bymore indicator lights. Third Row Seats Make sure that no objects are on the floor in front of the third r...

UNIVERSAL GARAGE DOOR OPENER The appearance of your vehicle’s universal garage door opener will varyaccording to your option package. Before programing, make sure youidentify which transmitter you have by comparing it to the graphicsbelow. HomeLink® Car2U® Home AutomationSystem Note: The programming...

1. Switch the ignition on. 2. Press and hold the outer twobuttons for 1–2 seconds, thenrelease. Note: You may need a ladder to reach the unit and you may need toremove the cover or lamp lens. Note: If you cannot locate the learn button, see the Owner’s Manual foryour garage door opener or call theto...

8. The LED lamp will begin to flash rapidly until programming iscomplete. If your garage door does not operate, repeat the previoussteps. Otherwise, call the toll-free help line at 1-866-572-2728. The LED lamp above the selected button will illuminate to confirm thatthe system is responding to the b...

Erasing the Function Button Codes Note: You cannot erase individual buttons. 1. Press and hold the outer two functionbuttons simultaneously for approximately20 seconds until the indicator lights abovethe buttons flash rapidly. 2. When the indicator lights flash, releasethe buttons. The codes for all...

AUXILIARY POWER POINTS WARNING: Do not plug optional electrical accessories into the cigarette lighter socket (if equipped). Improper use of the lighter can cause damage not covered by your warranty, and can result in fireor serious injury. Note: If used when the engine is not running, the battery w...

CENTER CONSOLE (IF EQUIPPED) Stow items in the cupholder carefully as items may become loose duringhard braking, acceleration or collisions, including hot drinks which mayspill. Available console features include: A. Cupholders B. Utility compartment, coin holderslots, tissue box holder, audio input...

GENERAL INFORMATION WARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. WARNING: Do not park, idle, or drive your vehicle on dry grass or other dry ground cover. The emission system heats up th...

A. Off: The ignition is off. B. Accessory: Allows the electrical accessories, such as the radio, to operate while the engine is not running. C. On: All the electrical circuits are operational. Warning lights are illuminated. This is the key position when driving. D. Start: Cranks the engine. Release...

The heater acts as a starting aid by warming the engine coolant. Thisallows the climate control system to respond quickly. The equipmentincludes a heater element (installed in the engine block) and a wireharness. You can connect the system to a grounded 120–volt A/Celectrical source. We recommend th...

SAFETY PRECAUTIONS WARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops. Otherwise, fue...

• Avoid getting fuel liquid in your eyes. If fuel is splashed in the eyes,remove contact lenses (if worn), flush with water for 15 minutes andseek medical attention. Failure to seek proper medical attention couldlead to permanent injury. • Fuels can also be harmful if absorbed through the skin. If f...

It is best not to alternate repeatedly between gasoline and E85. If you doswitch fuels, it is recommended that you add as much fuel aspossible—at least half a tank. Do not add less than five gallons(18.9 liters) when refueling. You should drive the vehicle immediatelyafter refueling for at least 5 m...

Refilling With a Portable Fuel Container WARNING: Do not insert the nozzle of portable fuel containers or aftermarket funnels into the Easy Fuel® system. This could damage the fuel system and its seal, and may cause fuel to run onto theground instead of filling the tank, which could result in seriou...

5. After you are done pumping fuel, slowly remove the fuel fillernozzle—allow about ten seconds after pumping fuel before removing thefuel filler nozzle. This allows residual fuel to drain back into the fuel tankand not spill onto the vehicle. 6. Reinstall the plug (if equipped) into the fuel fill i...

AUTOMATIC TRANSMISSION WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn the ignition to the off position and remove the key whenever you leave your vehicle. WARNING: Do not use the Tow/Haul feature when driving in icy or slippery conditions as the ...

4. Using a flat-head screwdriver orsimilar tool, move the brake-shiftinterlock actuator spindle towardthe left, apply the brake, place thekey in the on position and shift thetransmission into N (Neutral). 5. Start the vehicle. 6. Reinstall the access plug. If Your Vehicle Gets Stuck in Mud or Snow N...

USING FOUR-WHEEL DRIVE (4WD) (IF EQUIPPED ) WARNING: For important information regarding safe operation of this type of vehicle, see General Information in the Wheels and Tires chapter. Note: Do not use 4X4 mode on dry, hard surfaced roads. Doing so will produce excessive noise, increase tire wear a...

4WD switch positions WARNING: Utility and four-wheel drive vehicles are not designed for cornering at speeds as high as passenger cars any more than low-slung sports cars are designed to perform satisfactorilyunder off-road conditions. Avoid sharp turns or abrupt maneuvers inthese vehicles. Note: If...

The Control Trac® 4WD systemfunctions in four modes: • 2H (4X2) delivers power to the rear wheels only. The messagecenter will momentarily display4x2 when this mode is selected.This mode is appropriate fornormal on-road driving on drypavement and provides best fueleconomy. • 4A (4X4 AUTO) provides e...

Maintenance and modifications The suspension and steering systems on your vehicle have been designedand tested to provide predictable performance whether loaded or emptyand durable load carrying capability. For this reason, Ford MotorCompany strongly recommends that you do not make modifications suc...

GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may beworn out and should be inspected by an authorized dealer. If yourvehicle has continuous vibration or shudder in the steering wheel while...

HINTS ON DRIVING WITH ANTI-LOCK BRAKES When the system is operating, the brake pedal will pulse and may travelfurther. Maintain pressure on the brake pedal. You may also hear a noisefrom the system. This is normal. The anti-lock braking system will not eliminate the dangers inherentwhen: • you drive...

PRINCIPLES OF OPERATION The traction control system helps avoid drive wheel spin and loss oftraction. If your vehicle begins to slide, the system applies the brakes to individualwheels and, when needed, reduces engine power at the same time. If thewheels spin when accelerating on slippery or loose s...

PRINCIPLES OF OPERATION WARNING: Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction or wheel and tire size may change the handlingcharacteristics of the vehicle and may adversely affect the performanceof the AdvanceTrac® system. In ...

A Vehicle without AdvanceTrac® with RSC® skidding off its intendedroute. B Vehicle with AdvanceTrac® with RSC® maintaining control on aslippery surface. USING ADVANCETRAC® WITH RSC® (IF EQUIPPED) The system automatically activates when you start your engine. TheAdvanceTrac® with RSC® system cannot b...

SENSING SYSTEM (IF EQUIPPED) WARNING: To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed)objects when moving in reverse on a flat surface at parking speeds.Traffic control sy...

Using the Front and Rear Sensing System Rear Sensing System The rear sensors are only active when the transmission is in R (Reverse).As the vehicle moves closer to the obstacle, the rate of the audiblewarning increases. When the obstacle is fewer than 10 inches (25centimeters) away, the warning soun...

WARNING: Back up as slow as possible since higher speeds might limit your reaction time to stop the vehicle. WARNING: Use caution when using the rear video camera and the liftgate is ajar. If the liftgate is ajar, the camera will be out of position and the video image may be incorrect. All guideline...

Note: When towing, the camera only sees what is being towed behind the vehicle. This might not provide adequate coverage as it usuallyprovides in normal operation and some objects might not be seen. Insome vehicles, the guidelines may disappear once the trailer towconnector is engaged. Note: The def...

PRINCIPLES OF OPERATION Cruise control lets you maintain a set speed without keeping your footon the accelerator pedal. USING CRUISE CONTROL WARNING: Do not use cruise control in heavy traffic, on winding roads or when the road surface is slippery. This could result in loss of vehicle control, serio...

STEERING Your vehicle is equipped with power steering. Power steering uses energyfrom the engine to decrease the driver’s effort in steering the vehicle. To help prevent damage to the power steering pump: • Never hold the steering wheel to the extreme right or the extreme leftfor more than a few sec...

ROOF RACKS AND LOAD CARRIERS WARNING: When loading the roof rail crossbars, it is recommended to evenly distribute the load, as well as maintain a low center of gravity. Loaded vehicles, with higher centers of gravity,may handle differently than unloaded vehicles. Extra precautions, suchas slower sp...

LOAD LIMIT Vehicle Loading – With and Without a Trailer This section will guide you in the proper loading of your vehicle and/ortrailer, to keep your loaded vehicle weight within its design ratingcapability, with or without a trailer. Properly loading your vehicle willprovide maximum return of vehic...

Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue loador king pin weight is also part of cargo weight. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb weigh...

GVWR (Gross Vehicle Weight Rating) – is the maximum allowable weight of the fully loaded vehicle (including all options, equipment,passengers and cargo). The GVWR is shown on the Safety Compliance Certification Label. The label shall be affixed toeither the door hinge pillar, door-latch post, or the...

WARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structuraldamage, serious damage to the vehicle, loss of control and personalinjury. GCW (Gross Combined Weight) – is the...

WARNING: Do not exceed the GVWR or the GAWR specified on the Safety Compliance Certification Label. WARNING: Do not use replacement tires with lower load carrying capacities than the original tires because they may lower the vehicle’s GVWR and GAWR limitations. Replacement tires with ahigher limit t...

To move the shelf to the dividerposition: Pull up and pivot the shelf over the channels on the sidetrim panels and snap vertically inplace. POWER DEPLOYABLE RUNNING BOARDS (IF EQUIPPED) WARNING: In extreme climates, excessive ice buildup may occur, causing the running boards not to deploy. Be sure t...

The running boards automaticallymove when the doors are opened toassist entering and exiting thevehicle. Automatic Power Deploy The running boards will extend down and out when the doors areopened. Automatic Power Stow The running boards will return to the stowed position after a two seconddelay whe...

TOWING A TRAILER WARNING: Do not exceed the GVWR or the GAWR specified on the certification label. WARNING: Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of your vehicle and could result in engine damage, transmission damage, structural damage, lossof vehicle ...

TRAILER SWAY CONTROL WARNING: Turning off trailer sway control increases the risk of loss of vehicle control, serious injury or death. Ford does not recommend disabling this feature except in situations where speedreduction may be detrimental (such as hill climbing), the driver hassignificant traile...

Vehicle type Towing package Maximum GCWR - lb. (kg) Two–wheel drive(except EL and Max)Two–wheel drive EL(U.S.)Two–wheel drive Max(Canada)Four–wheel drive(except EL and Max)Four–wheel drive EL(U.S.)Four–wheel drive Max(Canada) Optional 15000 (6804) ESSENTIAL TOWING CHECKS Follow these guidelines for ...

Integrated Hitch Rating WARNING: Towing trailers beyond the maximum tongue weight exceeds the limit of the towing system and could result in vehicle structural damage, loss of vehicle control and personal injury. The standard integrated hitch has two ratings depending on mode ofoperation: • Weight-c...

Weight-distributing Hitch – Vehicles with Air Suspension WARNING: Do not adjust a weight-distributing hitch to any position where the rear bumper of the vehicle is higher than it was before attaching the trailer. Doing so will defeat the function of theweight-distributing hitch, which may cause unpr...

Safety Chains Note: Do not attach safety chains to the bumper. Always connect the trailer’s safety chains to the frame or hook retainersof your vehicle hitch. To connect the trailer’s safety chains, cross the chains under the trailertongue and allow enough slack for turning tight corners. Do not all...

Ford has tested the trailer brake controller to be compatible with severalmajor brands of electric-over-hydraulic trailer brakes. Contact anauthorized dealer for information on which brands you can use. The controller user interface consists of the following: A. + and - (Gain adjustment buttons): Pr...

B. Manual control lever: Slide the control lever to the left to turn on the trailer’s electric brakes independent of the tow vehicle’s brakes. Seethe following Procedure for adjusting gain section for instructions on proper use of this feature. If you use the manual control while the brakeis also ap...

Explanation of Information Display Warning Messages Note: An authorized dealer can diagnose the trailer brake controller to determine exactly which trailer fault has occurred. However, your Fordwarranty does not cover this diagnosis if the fault is with the trailer. TRAILER BRAKE MODULE FAULT: Displ...

• The controller interacts with the brake control system and powertraincontrol system of your vehicle to provide the best performance ondifferent road conditions. • Your vehicle’s brake system and the trailer brake system workindependently of each other. Changing the gain setting on thecontroller do...

• Shift to a lower gear when driving down a long or steep hill. Do notapply the brakes continuously, as they may overheat and become lesseffective. • If your transmission is equipped with a Grade Assist or Tow/Haulfeature, use this feature when towing. This provides engine brakingand helps eliminate...

Exceeding these limits may allow water to enter vehicle components: • Causing internal damage to the components. • Affecting driveability, emissions, and reliability. Replace the rear axle lubricant anytime the rear axle submerges inwater. Water may have contaminated the rear axle lubricant, which d...

Ford Motor Company produces a towing manual for all authorized towtruck operators. Have your tow truck operator refer to this manual forproper hook-up and towing procedures for your vehicle. It is acceptable to have your two-wheel drive vehicle towed with thefront wheels on the ground (without dolli...

BREAKING-IN You need to break in new tires for approximately 300 miles(480 kilometers). During this time, your vehicle may exhibit some uniquedriving characteristics. Avoid driving too fast during the first 1000 miles(1600 kilometers). Vary your speed frequently and change up throughthe gears early....

• Add particular accessories to your vehicle (e.g.; bug deflectors,rollbars or light bars, running boards, ski racks). • Drive with the wheels out of alignment. DRIVING THROUGH WATER Note: Driving through deep water may allow water into the transmission and engine causing internal damage. If you dro...

FLOOR MATS WARNING: Always use floor mats that are designed to fit the footwell of your vehicle. Only use floor mats that leave the pedal area unobstructed. Only use floor mats that are firmly secured toretention posts so that they cannot slip out of position and interferewith the pedals or impair s...

WARNING (Continued) • Failure to properly follow floor mat installation or attachmentinstructions can potentially cause interference with pedal operationcausing loss of control of vehicle. • To install floor mats, position the floor mat so that the eyelet is overthe retention post and press down to ...

ROADSIDE ASSISTANCE Vehicles Sold in the U.S.: Getting Roadside Assistance To fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program. Thisprogram is separate from the New Vehicle Limited Warranty. The serviceis available: • 24 hours a...

Vehicles Sold in the U.S.: Using Roadside Assistance Complete the roadside assistance identification card and place it in yourwallet for quick reference. This card is found in the owner’s manualportfolio in the glove compartment. U.S. Ford vehicle customers who require Roadside Assistance, call1-800...

FUEL PUMP SHUT-OFF SWITCH The fuel pump shut-off switch is a device intended to stop the electricfuel pump when your vehicle has been involved in a substantial jolt. After a collision, if the engine cranks but does not start, the fuel pumpshut-off switch may have been activated. The fuel pump shut-o...

Connecting the Jumper Cables WARNING: Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery. Note: Do not attach the negative (-) cable to fuel lines, engine rocker covers, the intake...

Removing the Jumper Cables Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. Remove the jumper cables in the reverse order that they wereconnected. 1. Remove the jumper cable fromthe ground metal surface. 2. Remove the jumper cable on thenega...

GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorizeddealer. While any authorized dealer handling your vehicle line willprovide warranty service, we recommend you return to your sellingauthorized dealer who wants to ensure your continued satisfaction. Plea...

• Ford Genuine Accessories • Service specials and promotions. In Canada: Mailing address Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6K 0C8 Telephone 1-800-565-3673 (FORD) Online www.ford.ca Additional Assistance If you have questions or concerns,...

UTILIZING THE MEDIATION or ARBITRATION PROGRAM (CANADAONLY) This pertains to vehicles delivered to authorized Canadian dealers. Inthose cases, where you continue to feel that the efforts by Ford ofCanada and the authorized dealer to resolve a factory-related vehicleservice concern have been unsatisf...

CHANGING A FUSE Fuses WARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. If electrical components in yourvehicle are not working, a fuse mayhave blown. Blown fuses areidentifi...

FUSE SPECIFICATION CHART Power Distribution Box WARNING: Always disconnect the battery before servicing high current fuses. WARNING: To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs. The power dis...

Fuse or relay location Fuse amp rating Protected circuits 82 — Not used 83 — Not used 84 — Not used 85 — Wiper motor relay * Mini Fuses ** Cartridge Fuses Passenger Compartment Fuse Panel The fuse panel is located under the right-hand side of the instrumentpanel. To remove the trim panel for accesst...

The fuses are coded as follows: Fuse or relay location Fuse amp rating Protected circuits 1 30A Driver window 2 15A Driver side memory module 3 15A Audio rear seat controls, Satelliteradio, SYNC 4 30A Not used (spare) 5 10A Keypad illumination, 3rd row seatenable, Brake shift interlock,Smart fuse pa...

GENERAL INFORMATION WARNING: Turn off the power running boards, if equipped, before working under the vehicle, jacking or placing any object under the vehicle. Never place your hand between the extendedrunning board and the vehicle. A moving running board may causeinjury. Have your vehicle serviced ...

Working with the Engine On WARNING: To reduce the risk of vehicle damage or personal burn injuries, do not start your engine with the air cleaner removed and do not remove it while the engine is running. 1. Set the parking brake and shift to position P . 2. Block the wheels. OPENING AND CLOSING THE ...

UNDER HOOD OVERVIEW 5.4L V8 A. Windshield washer fluid reservoir B. Engine oil dipstick C. Brake fluid reservoir D. Engine coolant reservoir E. Air filter assembly F. Power steering fluid reservoir G. Power distribution box H. Engine oil filler cap I. Battery A B C D E F G H I 300 Maintenance 2013 E...

Adding Engine Oil Note: Do not remove the engine oil level dipstick or the filler cap when the engine is running. Note: Do not add engine oil further than the MAX mark. Oil levels above the MAX mark may cause engine damage. Only use oils certified for gasoline engines by theAmerican Petroleum Instit...

Note: For best results, coolant concentration should be tested with a refractometer such as Rotunda tool 300-ROB75240 available from yourdealer. Ford does not recommend the use of hydrometers or coolant teststrips for measuring coolant concentrations. Note: Automotive fluids are not interchangeable;...

• In case of emergency, a large amount of water without engine coolantmay be added in order to reach a vehicle service location. In thisinstance, the cooling system must be drained, chemically cleaned withMotorcraft Premium Cooling System Flush, and refilled with enginecoolant as soon as possible. W...

If you drive in extremely hot climates: • It may be necessary to have a Ford authorized dealer decrease thecoolant concentration to 40%. • A coolant concentration of 40% will provide improved overheatprotection. Engine coolant concentrations below 40% will decrease thecorrosion/freeze protection cha...

When Fail-Safe Mode is Activated WARNING: Fail-safe mode is for use during emergencies only. Operate the vehicle in fail-safe mode only as long as necessary to bring the vehicle to rest in a safe location and seek immediate repairs.When in fail-safe mode, the vehicle will have limited power, will no...

Do not use supplemental transmission fluid additives, treatments orcleaning agents. The use of these materials may affect transmissionoperation and result in damage to internal transmission components. BRAKE FLUID CHECK Fluid levels between the MIN and MAX lines are within the normaloperating range;...

Note: The front and rear washer systems are supplied from the same reservoir. State or local regulations on volatile organic compounds may restrict theuse of methanol, a common windshield washer antifreeze additive.Washer fluids containing non-methanol antifreeze agents should be usedonly if they pr...

CHECKING THE WIPER BLADES Run the tip of your fingers over the edge of the bladeto check for roughness. Clean the wiper blades with washer fluid or waterapplied with a soft sponge or cloth. CHANGING THE WIPER BLADES Replace wiper blades at least once per year for optimum performance. To replace the ...

2. Grasp the wiper blade and rotateit away from the wiper arm usingmoderate force until it disengagesfrom the wiper arm. 3. Once the wiper blade is loose,slide it away from the wiper arm. 4. To attach the new wiper to thewiper arm, align the cross pin andkeyway (denoted with the arrows)and firmly pr...

Changing the Air Filter Element 1. Locate the mass air flow sensorelectrical connector on the airoutlet tube. This connector willneed to be unplugged. 2. Unlock the locking clip on theconnector (connector shown frombelow for clarity), then squeeze andpull the connector off of the airoutlet tube. 3. ...

ADJUSTING THE HEADLAMPS The headlamps on your vehicle are properly aimed at the assembly plant.If your vehicle has been in an accident, the alignment of your headlampsshould be checked by your authorized dealer. Vertical Aim Adjustment Before aim adjustment, disable the air suspension system. Refer ...

5. Locate the vertical adjuster oneach headlamp, then use a Phillips#2 screwdriver to turn the adjustereither counterclockwise orclockwise in order to adjust thevertical aim of the headlamp. Theupper edge of the light patternshould line up to the horizontal line. 6. Repeat Steps 3–5 for the otherhea...

Replacing Headlamp Bulbs WARNING: Handle a halogen headlamp bulb carefully and keep out of children’s reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause thebulb to break the next time the headlamps are operated. 1. Make sure that the headlam...

Replacing Tail, Stop, Turn Signal, Side Marker, and Backup LampBulbs The tail, stop, turn signal, side marker, and backup lamp bulbs arelocated in the same portion of the tail lamp assembly, one just below theother. Follow the same steps to replace any bulb: 1. Make sure the headlamp switch isin the...

Replacing License Plate Lamp Bulbs The license plate bulbs are located in the license plate housing assemblyon the liftgate. To change the license plate bulbs: 1. Make sure the headlamp switch isin the off position. 2. Remove the license lamp screwfrom the assembly. 3. Pull the lamp down and twist t...

• Spray Motorcraft® Engine Shampoo and Degreaser on all parts thatrequire cleaning and pressure rinse clean. In Canada, use Motorcraft®Engine Shampoo. • Never wash or rinse the engine while it is hot or running; water in therunning engine may cause internal damage. • Never wash or rinse any ignition...

• To check for compatibility, first test any cleaner or stain remover onan inconspicuous part of the leather. • Do not use household cleaning products, alcohol solutions, solvents orcleaners intended for rubber, vinyl and plastics, or oil/petroleum-basedleather conditioners. These products may cause...

Conditioning Bottles of King Ranch® Leather Conditioner are available at the KingRanch® Saddle Shop. Visit the website at www.krsaddleshop.com , or telephone (in the United States) 1–800–282–KING (5464). If you areunable to obtain King Ranch® Leather Conditioner, use another premiumleather condition...

VEHICLE STORAGE If you plan on storing your vehicle for an extended period of time(30 days or more), read the following maintenance recommendations tomake sure your vehicle stays in good operating condition. All motor vehicles and their components were engineered and tested forreliable, regular driv...

Removing Vehicle from Storage When your vehicle is ready to come out of storage, do the following: • Wash your vehicle to remove any dirt or grease film build-up onwindow surfaces. • Check windshield wipers for any deterioration. • Check under the hood for any foreign material that may have collecte...

GENERAL INFORMATION Notice to Utility Vehicle, Van and Truck Owners WARNING: Utility vehicles have a significantly higher rollover rate than other types of vehicles. To reduce the risk of serious injury or death from a rollover or other crash you must: • Avoid sharp turns and abrupt maneuvers; • Dri...

Treadwear The treadwear grade is a comparative rating based on the wear rate ofthe tire when tested under controlled conditions on a specifiedgovernment test course. For example, a tire graded 150 would wear 1 1 ⁄ 2 times as well on the government course as a tire graded 100. Therelative performance...

Information on P Type Tires P215/65R15 95H is an example of atire size, load index and speedrating. The definitions of theseitems are listed below. (Note thatthe tire size, load index and speedrating for your vehicle may bedifferent from this example.) A. P: Indicates a tire, designated by the Tire ...

G. H: Indicates the tire’s speed rating. The speed rating denotes the speed at which a tire is designed to be driven for extended periods oftime under a standard condition of load and inflation pressure. The tireson your vehicle may operate at different conditions for load and inflationpressure. The...

Additional Information Contained on the Tire Sidewall for LT TypeTires LT type tires have some additionalinformation beyond those of P typetires. These differences aredescribed below. Note: Tire Quality Grades do not apply to this type of tire. A. LT: Indicates a tire, designated by the Tire and Rim...

Information on T Type Tires T type tires have some additionalinformation beyond those of P typetires. These differences aredescribed below. T145/80D16 is an example of a tiresize. Note: The temporary tire size for your vehicle may be different fromthis example. Tire Quality Gradesdo not apply to thi...

INFLATING YOUR TIRES Safe operation of your vehicle requires that your tires are properlyinflated. Remember that a tire can lose up to half of its air pressurewithout appearing flat.Every day before you drive, check your tires. If one looks lower than theothers, use a tire gauge to check pressure of...

WARNING: Age Tires degrade over time depending on many factors such as weather, storage conditions, and conditions of use (such as load, speed,inflation pressure) the tires experience throughout their lives.In general, tires should be replaced after six years regardless of treadwear. However, heat c...

Tire Replacement Requirements WARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus LT-metric or all-season versus all-terrain) as those originallyprovided by Ford. The recommended tire and wheel size may be found oneither t...

Your vehicle is equipped with tires designed to provide a safe ride andhandling capability. Important: Remember to replace the wheel valve stems when the road tires are replaced on your vehicle. The two front tires or two rear tires should generally be replaced as apair. The tire pressure sensors mo...

Highway Hazards No matter how carefully you drive, there is always the possibility thatyou may eventually have a flat tire on the highway. Drive slowly to theclosest safe area out of traffic. This may further damage the flat tire, butyour safety is more important. If you feel a sudden vibration or r...

• Rear-wheel drivevehicles/Four-wheel drive vehicles(front tires at left of diagram) Sometimes irregular tire wear canbe corrected by rotating the tires. USING SNOW CHAINS WARNING: Snow tires must be the same size, load index, speed rating as those originally provided by Ford. Use of any tire or whe...

• Do not exceed 30 mph (48 km/h) with tire chains on your vehicle. • Drive cautiously. If you hear the chains rub or bang against yourvehicle, stop and retighten the chains. If this does not work, removethe chains to prevent damage to your vehicle. • Remove the tire chains when they are no longer ne...

Your vehicle has also been equipped with a TPMS malfunction indicatorto indicate when the system is not operating properly. The TPMSmalfunction indicator is combined with the low tire pressure telltale.When the system detects a malfunction, the telltale will flash forapproximately one minute and the...

Understanding Your Tire Pressure Monitoring System The tire pressure monitoring system measures pressure in your four roadtires and sends the tire pressure readings to your vehicle. The low tirepressure warning light will turn on if the tire pressure is significantly low.Once the light is illuminate...

When you believe your system is not operating properly The main function of the tire pressure monitoring system is to warn youwhen your tires need air. It can also warn you in the event the system isno longer capable of functioning as intended. See the following chart forinformation concerning your ...

Low tirepressurewarning light Possible cause Customer action required Flashingwarning light Spare tire in use Repair the damaged road wheel and tire and reinstall it on thevehicle to restore system function.For a description on how thesystem functions, see When your temporary spare tire is installed...

CHANGING A ROAD WHEEL WARNING: The use of tire sealants may damage your tire pressure monitoring system and should not be used. However, if you must use a sealant, the tire pressure monitoring system sensor andvalve stem on the wheel must be replaced by an authorized Forddealer. WARNING: See Tire Pr...

The usage of a full-size dissimilar spare tire and wheel assembly can leadto impairment of the following: • Handling, stability and braking performance • Comfort and noise • Ground clearance and parking at curbs • Winter weather driving capability • Wet weather driving capability • All-wheel driving...

Removing the jack and tools 1. Open the liftgate, then locate theaccess panel on the floor behind thethird row seat. Unlatch and removethe panel. 2. Remove the jack and toolsassembly tray from thecompartment by turning thewing-nut counterclockwise torelieve tension against the jackassembly tray. Rem...

TECHNICAL SPECIFICATIONS Wheel Lug Nut Torque Specifications WARNING: When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum orbrake disc that contacts the wheel. Make sure that any f...

MOT ORCRAFT® P ART NUMBERS Component 5.4L V8 engine Air filter e lement F A -1883 Battery BXT -65-650 or BXT -65-750 (if equipped) Oil filter FL-820-S Spark p lugs 1 HJFS24FP/SP-509 Seat filter ( if equipped) FS-104 W indshield w iper blade WW -2201-PF WW -1601-PF (rear) 1 Refer to scheduled mainten...

VEHICLE IDENTIFICATION NUMBER The vehicle identification number islocated on the driver’s sideinstrument panel. Please note that in the graphic,XXXX is representative of yourvehicle identification number. The Vehicle Identification Number (VIN) contains the followinginformation: A. World manufacture...

ACCESSORIES For a complete listing of the accessories that are available for yourvehicle, please contact your authorized dealer or visit our online store at: Accessories.Ford.com (U.S. only). Ford Custom Accessories are available for your vehicle through yourauthorized Ford or Ford of Canada dealer....

FORD ESP EXTENDED SERVICE PLANS PROTECT YOURSELF FROM THE RISING COST OF VEHICLE REPAIRSWITH A FORD EXTENDED SERVICE PLAN. SERVICE PLANS (U.S. only) More than 32 Million Ford and Lincoln owners have discovered thepowerful protection Ford ESP. It is the only extended service planbacked by Ford Motor ...

Interest Free Financing Options Available Take advantage of our interest free installment payment plan. Just a 10%down payment will provide you with an affordable, no interest, no feepayment program. Complete the information below and mail to: Ford ESPPO Box 8072Royal Oak Michigan 48068-0039 To lear...

GENERAL MAINTENANCE INFORMATION Why Maintain Your Vehicle? Carefully following the maintenance schedule helps protect against majorrepair expenses resulting from neglect or inadequate maintenance andmay help to increase the value of your vehicle when you sell or trade it.Keep all receipts for comple...

Note: Not all dealers have extended hours or body shops. Please contact your dealer for details. Protecting Your Investment Maintenance is an investment that pays dividends in the form ofimproved reliability, durability and resale value. To maintain the properperformance of your vehicle and its emis...

NORMAL SCHEDULED MAINTENANCE AND LOG The following section contains the Normal Scheduled Maintenance. Thisschedule is presented at specific mileage (kilometer) intervals withexceptions as noted. Normal scheduled maintenance Every 7500 miles(12000 km) or sixmonths (whichevercomes first) Change engine...

Other maintenance items Every 30000 miles(48000 km) Replace climate-controlled (heated andcooled) seat filter (if equipped). Replace engine air filter. Every 97500 miles(156000 km) Replace spark plugs. Every 105000 miles(168000 km) Change engine coolant. * Inspect accessory drive belt(s). ** Every 1...

Maintenance Schedule Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ...

Extensive idling or low-speed driving for long distances as in heavy commercial use (such as delivery, taxi, patrol car or livery) Inspect frequently,service as required Replace engine air filter. Every 5000 miles(8000 km) Inspect brake system. Inspect wheels and related components forabnormal noise...

Off-road operation Inspect frequently,service as required Inspect steering linkage, ball joints andU-joints. Lubricate if equipped with greasefittings. Replace engine air filter. Every 5000 miles(8000 km) Change engine oil and filter. * Inspect the wheels and related components forabnormal noise, we...

Special Operating Condition Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D A...

EXCEPTIONS Normal vehicle axle maintenance: Rear axles and power take-off units with synthetic fluid and light-duty trucks equipped withFord-design axles are lubricated for life; do not check or change fluidunless a leak is suspected, service is required or the assembly has beensubmerged in water. D...

ENGINE COOLANT CHANGE RECORD Initial change Six years or 105000 miles (168000 km)(whichever comes first) After initial change Every three years or 45000 miles (72000 km) Engine Coolant Change Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C O...

Monday-Saturday, 8:30am-8:00pm EST. In the United States, call: 1–888–270–1055. In Canada, call: 1–800–565–3673. Times are subject to change due to holidays. SYNC Owner Account Why do I need a SYNC owner account? • Required to activate Vehicle Health Report and to view the reportsonline. • Required ...

For your safety, some SYNC functions are speed-dependent. Their use islimited to when your vehicle is traveling at speeds under 3 mph(5 km/h). Make sure that you review your device’s manual before using it withSYNC. Privacy Information When a cellular phone is connected to SYNC, the system creates a...

2. When Active Call Menu is selected, press OK.3. Scroll to cycle through the following options: When you select: You can: Mute Call? Mute the call. Privacy Switch a call from an active hands-freeenvironment to your cellular phone for a moreprivate conversation.Press OK when Privacy on/off appears. ...

When you select: You can: Call History Access your call history log.1. Press OK to select, then scroll throughyour call history options (incoming, outgoingor missed).2. Press OK when the desired selectionappears in the display.3. Press the phone button to call theselection. Return Exit the current m...

Text Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages.The system can also read incoming text messages to you so that you donot have to take your eyes off the road. Receiving a Text Message Note: This is a phone-dependent feature. ...

Delete All Messages? allows you to delete current text messages from SYNC (not your phone). To delete the messages, press OK to select. Thedisplay indicates when all your text messages have been deleted andSYNC returns you to the text message menu. Note: SYNC does not automatically download all of y...

When you select: You can: Modify Phonebook Modify the contents of your phone book (i.e.,add, delete, download). Press OK to selectand scroll between: Add Contacts: Press OK to add more contactsfrom your phone book. Push the desiredcontact(s) on your phone. See your phone’suser guide on how to push c...

System Settings System Settings provide access to your Bluetooth Devices andAdvanced menu features. Use the arrow buttons to scroll through themenu options. The Bluetooth Devices menu allows you to add, connect, delete and set aphone as primary as well as turn your Bluetooth feature on and off. The ...

If you select: You can: Set Bluetooth On/Off Turn the Bluetooth feature on and off.Press OK and scroll to toggle between On andOff. When the desired selection is chosen,press OK. Note: Turning Bluetooth off disconnects all Bluetooth devices and deactivates allBluetooth features. Delete Device Delete...

Advanced Menu Options This menu allows you to access settings such as prompts, languages,defaults, perform a master reset, install an application and view systeminformation.1. Press the phone button to enter the Phone Menu.2. Scroll until System Settings appears and press OK.3. Scroll until Advanced...

If you select: You can: Master Reset Completely erase all information stored onSYNC (phonebook, call history, text messagesand paired devices) and return to the factorydefault settings.Press OK to select. The display indicateswhen complete and SYNC takes you back tothe Advanced menu. Install Applica...

911 Assist Privacy Notice Once 911 Assist is set on, it may disclose to emergency services that thevehicle has been in a crash involving the deployment of an airbag oractivation of the fuel pump shut-off. Certain versions or updates to 911Assist may also be capable of electronically or verbally disc...

The system allows you to check your vehicle’s overall health in the formof a diagnostic report card. The vehicle health report contains valuableinformation such as: • Vehicle Diagnostic Information • Scheduled maintenance • Open Recalls and Field Service Actions • Unserviced items from vehicle inspe...

3. While on an active route, you can select or say “Route summary” or “Route status” to view the Route Summary turn list or the RouteStatus ETA. You can also turn voice guidance on or off, cancel theroute or update the route. If you miss a turn, SYNC automatically asks if you want the routeupdated. ...

SYNC AppLink™ Note: This feature is only available in the United States. Note: Your smartphone must be paired and connected to SYNC to access AppLink. Note: iPhone users need to connect the phone to the USB port in order to start the application. It is recommended to lock your iPhone afterstarting a...

To Access Using Voice Commands 1. Press the voice icon.2. When prompted, say “Mobile Apps”.3. Say the name of the application after the tone.4. The app should start. While an app is running through SYNC, you can press the voice button and speak commands specific to the app, suchas “Play Station Quic...

“USB” “Play track <name>” 1,3 “Refine album <name>” 1,3 “Refine artist <name>” 1,3 “Refine song <name>” 1,3 “Refine track <name>” 1,3 “Repeat off” “Repeat on” “Search album <name>” 1,3 “Search artist <name>” 1,3 “Search genre <name>” 1,3 “Search song &...

Press the voice icon and when prompted say “Bluetooth Audio” and thenany of the following: “BLUETOOTH AUDIO” “(Phone) (Media) (Bluetooth) Connections” “Pause” “Play” “Play next track ” “Play previous track ” Media Menu Features The media menu allows you to select your media source, how to playyour m...

When you select: You can: Select Source SYNC USB: Press OK to access music plugged into your USB port. You can also plugin devices to charge them (if supported byyour device). Once connected, the systemindexes any readable media files. (The timerequired to complete this depends on the sizeof the med...

When you select: You can: Explore USB Explore all supported digital media on yourmedia device connected to the USB port. Youcan only view media content which iscompatible with SYNC; other files saved arenot visible.Press OK to select. Then scroll to exploreindexed media on your flash drive. Similar ...

When you select: You can: Master Reset Completely erase all information stored onSYNC (all phonebook, call history, textmessages and all paired devices) and returnto the factory default settings. Application Download new software applications (ifavailable) and then load the desiredapplications throu...

Vehicle Health Report and SYNC Services (Traffic, Directions and Information) issues Issue Possible cause(s) Possible solution(s) I received a textthat the VehicleHealth Report isnot activated. • Your account may not beactivated on thewebsite, OR • You may have the wrong VIN(vehicleidentificationnum...

NAVIGATION CONTROLS WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus offthe road. Your primary responsibility is the safe operation of yourvehicle. We recommend...

K. SEEK: • In radio and satellite radio mode, press the arrow buttons to findprevious or next available stations or channels within the currentlyselected Category or Genre. • In CD and DVD modes, press the arrow buttons to select the previousor next track or chapter. L. MENU: • Press this button to ...

Using the Touch-sensitive Controls on Your System To turn a feature on and off, just touch the graphic with your finger. Toget the best performance from the touch-sensitive controls: • Make sure your hands are clean and dry. • Since the touchscreen operates based on the touch of a finger, youmay hav...

How To Use Voice Commands with Your System Press the voice icon; after the tone, speak your commandclearly. You can say these commands at any time. “Audio” “Navigation” “CD” “Radio” “Disc” “SYNC” * “Display mode” “Tutorial” “DVD” “User profile” “Jukebox” “Video CD” “Line in” “Voice settings” “Mobile...

Confirmation Prompts: The system uses these short questions to confirm your voice request. If turned off, the system simply makes a bestguess as to what you requested. The system may still occasionally askyou to confirm settings. SYSTEM MENU FEATURES Your system offers many menu features, such as al...

ENTERTAINMENT Your system offers many media options. You can access these optionsusing the touchscreen or voice commands. AM/FM Radio Press the RADIO hard button. To change between AM, FM1 and FM2, touch the AM or FMtab. You can also access satellite radio by pressing this button. See SIRIUS satelli...

When you select: You can: Show Presets View the preset stations. Save a station bypressing and holding one of the memorypreset areas. There is a brief mute while theradio saves the station. Sound returns whenfinished. Set PTY/All Select a category of music you would like tosearch for and then choose...

HD Radio™ Information (If Available) Note: HD Radio broadcasts are not available in all markets. HD Radio technology is the digital evolution of analog AM/FM radio. Yoursystem has a special receiver that allows it to receive digital broadcasts(where available) in addition to the analog broadcasts, i...

When you select: You can: Tune Go up and down the frequency in individualincrements.If the current station has multiple digitalbroadcasts, the multicast indicator appears.Press Tune repeatedly to advance through allavailable broadcasts. If you are on the lastbroadcast channel, press to advance to th...

When you select: You can: To save a multicaststation as a preset When the channel is active on-screen, pressand hold a memory preset slot until the soundreturns. There is a brief mute while the radiosaves the station. Sound returns whenfinished. When recalling a HD2 or HD3memory preset, there is a m...

HD Radio Technology manufactured under license from iBiquity DigitalCorp. U.S. and foreign patents. HD Radio and the HD and HD Radiologos are proprietary trademarks of iBiquity Digital Corp. Ford MotorCompany and iBiquity Digital Corp. are not responsible for the contentsent using HD Radio technolog...

SIRIUS® Satellite Radio Voice Commands If you are listening to SIRIUS satellite radio, press the voicebutton on the steering wheel control. When prompted, say anyof the commands in the following chart. If you are not listening to SIRIUS satellite radio, press the voice buttonand, after the tone, say...

SIRIUS® Information Note: SIRIUS reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particularchannels, and its prices, at any time, with or without notice to you. FordMotor Company shall not be responsible for any such programmingch...

Troubleshooting tips Radio Display Condition Possible Action Acquiring... Radio requires morethan two seconds toproduce audio for theselected channel. No action required.This message shoulddisappear shortly. Sat Fault/SIRIUSSystem Failure There is an internalmodule or systemfailure present. If this ...

Troubleshooting tips Radio Display Condition Possible Action No Channels Available. All the channels in the selected channels areeither skipped orlocked. Use the channel guideto turn off the Lock or Skip function on that station. Subscription Updated. SIRIUS has updatedthe channels availablefor your...

CD Voice Commands If you are listening to a CD, press the voice button on thesteering wheel control. When prompted, say any of thecommands in the following chart. If you are not listening to a CD, press the voice button and, after thetone, say “CD”, then any of the commands in the following chart. “...

DVD Note: Your system only plays NTSC formatted discs. The system does not support PAL format. Your system allows you to play DVD audio and video discs. Make sureyour vehicle is in position P (vehicles equipped with an automatic transmission) or the parking brake is engaged (vehicles equipped with a...

During disc play, you can also touchthe screen to access the virtualremote, which allows you to MoveControls on the screen, as well asuse the cursor controls, Enter andReturn to navigate and select withinthe menus. Dolby® noise reduction is manufactured under license from Dolby®Laboratories Licensin...

DVD Voice Commands If you are watching a DVD, press the voice button on thesteering wheel control. When prompted, say any of thecommands in the following chart. If you are not watching a DVD, press the voice button and, after thetone, say “DVD”, then any of the commands in the following chart. “DVD”...

Jukebox Your system has a Jukebox feature, which allows you to save desired tracksor CDs to the hard drive for later access. The hard drive can store up to 10GB* (164 hours; approximately 2472 tracks) of music. The system containsa Gracenote® media database that allows for display of song title, alb...

Creating a Playlist Press the MEDIA hard button, and then select the Jukebox tab on thetouchscreen.1. Select Options.2. Select Edit Playlists, then which playlist you would like to create.3. Select which category you would like to access from your saved music.4. Select the desired songs and then pre...

User Device If your vehicle is equipped with SYNC®, there is a User Device tab. Formore information, see the SYNC® chapter. Line In (Auxiliary Input Jack) Your vehicle is equipped with an audio input jack, which allows you toplug a portable audio device into your vehicle’s audio system. To turnthis ...

SIRIUS Travel Link Voice Commands Press the voice button and, after the tone, say “Travel Link”,then any of the commands in the following chart: “TRAVEL LINK” “5–day weather forecast” “NBA schedule” “Baseball schedule” “NBA scores” “Baseball scores” “NFL schedule” “College basketball schedule” “NFL ...

Programming a Destination Using the Touchscreen 1. Press the DEST hard button. 2. Select from the following: Quick Note: Items on this screen are selectable at any speed. Cancel Route Touch this button to cancel the current route. Emergency Touch this button to find hospitals and policestations clos...

Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). FreewayEntrance/Exit Touch this button to select an entrance and exitpoint to a freeway you select. You can sort theentrance and exit point alphabetically or in orderof distance ...

Standard Note: Items on this screen are selectable only when your vehicle is moving at speeds slower than 5 mph (8 km/h). Intersection Touch this button to select an intersection point.Enter the name of the first street, then the firstletter of the second street. The system displayspossible intersec...

Within these main categories, there are subcategories, which containmore listings: Subcategories Restaurant Auto Dealership Parking Public Transit Home & Garden Education Personal Care Services Setting Your Navigation Preferences Select settings for the system to take into account when planning ...

Navigation Preferences Guidance Prompts Voice guides you with tones and voice prompts only. Tone only guides you with tones only. OFF turns off any voice or tone prompts. Auto-FillState/Province When this feature is on, the systemautomatically fills in the state or provinceinformation based on your ...

Navigation Preferences Low Fuel POINotification When this feature is on, the system displaysgas station icons when the fuel level is low. Fuel Price Display When this feature is on, the system displaysfuel prices at local stations. You can choose todisplay prices for Unleaded or Diesel. * Calibrate ...

Heading Up Bird’s Eye View provides an elevated perspective of the map. You can adjust the viewing angle through the mappreferences. North Up always shows the northern direction to be upward on the screen. Map Icons Vehicle mark shows the current location of your vehicle. It stays in the center of t...

Next maneuver point indicates the location of the next turn on the planned route. No GPS symbol indicates that insufficient GPS satellite signals are available for accurate map positioning. This icon may displayunder normal operation in an area with poor GPS access. Map Scale The map display scale h...

Quick-touch Buttons When in map mode, touch anywhere on the map display to access thefollowing options: When you select: You can: Set as Dest Select a scrolled location on the map as yourdestination. You may scroll the map bypressing your index finger on the map display.When you reach the desired lo...

GENERAL INFORMATION SYNC® End User License Agreement (EULA) • You have acquired a device (“DEVICE”) that includes software licensed by Ford Motor Company and its affiliates (“FORD MOTORCOMPANY”) from an affiliate of Microsoft Corporation (“MS”). Thoseinstalled software products of MS origin, as well...

DEVICE downloads licenses for protected content, you agree thatMicrosoft may include a revocation list with the licenses. Contentowners may require you to upgrade the SOFTWARE on your DEVICEto access their content. If you decline an upgrade, you will not be ableto access content that requires the up...

laws and treaties. This EULA grants you no rights to use such content.All rights not specifically granted under this EULA are reserved by MS,Microsoft Corporation, FORD MOTOR COMPANY, third party softwareand service providers, their affiliates and suppliers. Use of any on-lineservices which may be a...

Adobe Contains Adobe® [Flash® Player] or [AIR®] technology by AdobeSystems Incorporated. This [Licensee Product] contains [Adobe® Flash®Player] [Adobe® AIR®] software under license from Adobe SystemsIncorporated, Copyright 娀 1995-2009 Adobe Macromedia Software LLC. All rights reserved. Adobe, Flash ...

General operation Voice Command Control Functions within the Windows Automotive-based system may beaccomplished using only voice commands. Using voice commands whiledriving allows you to operate the system without removing your handsfrom the wheel. Prolonged Views of Screen Do not access any functio...

Route Safety Do not follow the route suggestions if doing so would result in an unsafe orillegal maneuver, if you would be placed in an unsafe situation, or if youwould be directed into an area that you consider unsafe. The driver isultimately responsible for the safe operation of the vehicle and th...

Restrictions: Except where you have been specifically licensed to do so by (Licensee), and without limiting the preceding paragraph, you maynot (a) use this Data with any products, systems, or applicationsinstalled or otherwise connected to or in communication with vehicles,capable of vehicle naviga...

Termination for Breach or Bankruptcy: (Licensee) and its licensors, including NAVTEQ, may terminate this Agreement if you breach any ofits terms. Upon any such termination, you shall immediately cease youruse of the Data and return all copies thereof to LICENSEE or NAVTEQ,as instructed. (Licensee) a...

Gracenote® Copyright CD and music — related data from Gracenote, Inc., copyright 娀 2000–2007 Gracenote. Gracenote Software, copyright 娀 2000–2007 Gracenote. This product and service may practice one or more of thefollowing U.S. Patents #5,987,525; #6,061,680; #6,154,773, #6,161,132,#6,230,192, #6,23...

911 Assist™ ..............................413 A ABS (see Brakes) .....................231 Accessing call history/phonebook during active call .............402 Accessing the help screen .......475 Accessing the music in yourjukebox ......................................469 Accessing your media menufe...

U Universal garage door opener ..184 USB port ....................................129 Using privacy mode ..................402 V Vehicle health report ................416 Vehicle Identification Number(VIN) ..........................................370 Vehicle loading ..........................247 Ve...