Ford 2013 Edge v.2- Manuals

ABOUT THIS MANUAL Thank you for choosing Ford. We recommend that you take some time toget to know your vehicle by reading this manual. The more that you knowabout it, the greater the safety and pleasure you will get from driving it. WARNING: Always drive with due care and attention when using and op...

Symbol Description Symbol Description Symbol Description Serviceengine soon Side airbag Stabilitycontrol Windshielddefrost anddemist Windshieldwasher andwiper DATA RECORDING Service Data Recording Service data recorders in your vehicle are capable of collecting andstoring diagnostic information abou...

traffic reports, or business searches that you request. If you donot want Ford or its vendors to receive this information, do notactivate the service. Ford Motor Company and the vendors it usesto provide you with this information do not store your vehicletravel information. For more information, see...

Scheduled Maintenance and Mechanical Repairs One of the best ways for you to make sure that your vehicle providesyears of service is to have it maintained in line with ourrecommendations using parts that conform to the specifications detailedin this Owner’s Manual. Genuine Ford and Motorcraft parts ...

MOBILE COMMUNICATIONS EQUIPMENT Using mobile communications equipment is becoming increasinglyimportant in the conduct of business and personal affairs. However, youmust not compromise your own or others’ safety when using suchequipment. Mobile communications can enhance personal safety andsecurity ...

GENERAL INFORMATION See the following sections for directions on how to properly use safetyrestraints for children. WARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be purchased separately from the...

WARNING: Always restrain an unoccupied child seat or booster seat. These objects may become projectiles in a collision or sudden stop, which may increase the risk of serious injury. WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it r...

BOOSTER SEATS WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the riskof injury or death in a collision. Use a belt-positioning booster seat for children who ha...

Types of Booster Seats • Backless booster seats If your backless booster seat has a removable shield, remove the shield.If a vehicle seating position has a low seat back or no head restraint, abackless booster seat may place your child’s head (as measured at thetops of the ears) above the top of the...

If the booster seat slides on the vehicle seat, placing a rubberized meshsold as shelf or carpet liner under the booster seat may improve thiscondition. Do not introduce any item thicker than this under the boosterseat. Check with the booster seat manufacturer’s instructions. INSTALLING CHILD SAFETY...

10. Before placing the child in theseat, forcibly move the seat forwardand back to make sure the seat issecurely held in place. To check this, grab the seat at the belt path and attempt to move it sideto side and forward and back. There should be no more than 1 inch(2.5 cm) of movement for proper in...

Use of Inboard Lower Anchors from the Outboard SeatingPositions (Center Seating Use) WARNING: The standardized spacing for LATCH lower anchors is 11 in. (28 cm) center to center. Do not use LATCH lower anchors for the center seating position unless the child seatmanufacturer’s instructions permit an...

4. Tighten the child safety seat tether strap according to themanufacturer’s instructions. If your child restraint system is equipped with a tether strap, and thechild restraint manufacturer recommends its use, Ford also recommendsits use. CHILD SAFETY LOCKS The childproof locks are located on the r...

PRINCIPLES OF OPERATION WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. WARNING: To reduce the risk of injury, make sure children sit where they can be properly restrained. WARNING: Never let a passenger hold a child on his or her lap while th...

FASTENING THE SAFETY BELTS The front outboard and rear safety restraints in the vehicle arecombination lap and shoulder belts. 1. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) until you hear a snap and feelit latch. Make sure the tongue is...

To adjust the comfort guide: 1. Slip the shoulder belt into thebelt guide. 2. Slide the guide up or down alongthe webbing so that the belt iscentered on the occupant’sshoulder. Restraint of Pregnant Women WARNING: Always ride and drive with your seatback upright and the safety belt properly fastened...

How to use the automatic locking mode 1. Buckle the combination lap and shoulderbelt. 2. Grasp the shoulder portion and pulldownward until the entire belt is pulled out. Allow the belt to retract. As the belt retracts, you will hear a clickingsound. This indicates the safety belt is now in the autom...

SAFETY BELT HEIGHT ADJUSTMENT WARNING: Position the safety belt height adjusters so that the belt rests across the middle of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness of the seat beltand increase the risk of injury in a collision. Adjust the height of t...

4. Within approximately seven seconds of the light turning off, bucklethen unbuckle the safety belt. • This will disable the feature for that seating position if it is currentlyenabled. As confirmation, the safety belt warning light will flash 12times in three seconds. • This will enable the feature...

PERSONAL SAFETY SYSTEM™ The Personal Safety System provides an improved overall level of frontalcrash protection to front seat occupants and is designed to help furtherreduce the risk of airbag-related injuries. The system is able to analyzedifferent occupant conditions and crash severity before act...

The airbags are a supplemental restraint system and are designed towork with the safety belts to help protect the driver and right frontpassenger from certain upper body injuries. Airbags DO NOT inflateslowly; there is a risk of injury from a deploying airbag. Note: You will hear a loud bang and see...

DRIVER AND PASSENGER AIRBAGS WARNING: Never place your arm or any objects over an airbag module. Placing your arm over a deploying airbag can result in serious arm fractures or other injuries. Objects placed on or over theairbag inflation area may cause those objects to be propelled by theairbag int...

If you think that the state of the passenger airbag status indicator lampis incorrect, check for the following: • Objects lodged underneath the seat • Objects between the seat cushion and the center console (if equipped) • Objects hanging off the seat back • Objects stowed in the seatback map pocket...

If it is necessary to modify an advanced front airbag system toaccommodate a person with disabilities, contact the Ford CustomerRelationship Center at the phone number shown in the Customer Assistance section of this owner’s manual. SIDE AIRBAGS WARNING: Do not place objects or mount equipment on or...

The system consists of the following: • A label or embossed side panel indicatingthat side airbags are fitted to your vehicle. • Side airbags located inside the seatback ofthe driver and front passenger seats. • Crash sensors and monitoring system with readinessindicator. Refer to Crash sensors and ...

Children 12 years old and under should always be properly restrained inthe rear seats. The Safety Canopy will not interfere with childrenrestrained using a properly installed child or booster seat because it isdesigned to inflate downward from the headliner above the doors alongthe side window openi...

If any of these things happen, even intermittently, have the supplementalrestraint system serviced at an authorized dealer immediately. Unlessserviced, the system may not function properly in the event of acollision. The safety belt pretensioners and the airbag supplemental restraintsystem is design...

PRINCIPLE OF OPERATION The remote control allows you to: • remotely lock or unlock the vehicle doors • unlock the doors without actively using a key or remote control(intelligent access only) • remotely open the power liftgate (if equipped) • remotely start or stop the engine (if equipped) • arm and...

Intelligent Access (If Equipped) The system uses a radio frequency signal to communicate with yourvehicle and authorize your vehicle to unlock when commanded (eitherby touching the inside of the driver door or front passenger exterior doorhandle, by activating the exterior power liftgate button, or ...

Intelligent Access Key (If Equipped) Your vehicle may be equipped withtwo intelligent access keys whichoperate the power locks and theremote start system. The key mustbe in the vehicle to activate thepush button start system. The intelligent access key alsocontains a removable mechanical keyblade th...

Car Finder Press the button twice within three seconds. The horn willchirp and the turn signals will flash. It is recommended thatthis method be used to locate your vehicle, rather than using the panic alarm. Sounding a Panic Alarm Note: The panic alarm will only operate when the ignition is off. Pr...

Extending the Engine Run Time Repeat Steps 1 and 2 with the engine still running to extend the runtime for another remote start duration. If you programmed the durationto last 10 minutes, the second 10 minutes will begin after what is left ofthe first activation time. For example, if the vehicle had...

PRINCIPLES OF OPERATION MyKey 威 allows you to program keys with restricted driving modes to promote good driving habits. All but one of the keys programmed to thevehicle can be activated with these restricted modes. Any keys that havenot been programmed are referred to as an “administrator key” or“a...

• Audio system maximum volume of 45%. A message in the audiosystem is displayed when attempting to exceed the limited volume.Also, Speed sensitive compensated volume (sscv) feature will bedisabled. • Always on setting. When this is selected you will not be able to disable911 Assist, AdvanceTrac or D...

CLEARING ALL MYKEYS Note: All programmed MyKeys can be cleared within the same key cycle in which a MyKey was created, otherwise an admin key is required toclear the keys. To clear all MyKeys (which removes all restrictions and returns them toadmin key status), use the information display control to...

In addition to the key that has been programmed as a MyKey, owners ofvehicles equipped with traditional keys have the option to program thenon-Ford-approved remote start system as a MyKey if the remote startfob is used by the MyKey driver. To program a non-Ford-approved remote start system as a MyKe...

Condition Potential Causes I accidentallyprogrammed all keysas restricted keys • The vehicle has a remote start system that is recognized as an admin key. Refer to the Using MyKey with remote start systems section to reset all restricted keys usingremote start. No restricted keyfunctions withintelli...

LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lockand unlock the vehicle. Power Door Locks A. Unlock B. Lock Remote Control The remote control can be used any time the vehicle is not running. Unlocking the Doors (Two-Stage Unlock) Press the button to unlock t...

Power Liftgate (If Equipped) WARNING: Make sure all persons are clear of the liftgate area before using power liftgate control. WARNING: Make sure the liftgate is closed to prevent exhaust fumes from being drawn into the vehicle. This will also prevent passengers and cargo from falling out. If you m...

Autounlock Feature (If Enabled) The autounlock feature will unlock all the doors when: • the ignition is on, all the doors are closed, and the vehicle has been inmotion at a speed greater than 12 mph (20 km/h); • the vehicle has then come to a stop and the ignition is turned off or toaccessory; and ...

Note: Do not leave the liftgate open while driving. This could damage the liftgate and its components. The liftgate area is only intended for cargo, not passengers. To open the liftgate: Press the button located in the top of theliftgate pull cup handle to unlatch theliftgate, then pull on the outsi...

Opening and Closing the Power Liftgate Note: The liftgate movement direction can be reversed with a second press of the instrument panel, or the control button on the liftgate, or asecond double press of the transmitter button. The liftgate will only operate with the vehicle in P (Park). A chime wil...

To close with the rear cargo area control: Press and release the button located in the rear cargo area. WARNING: Keep clear of the liftgate when activating the rear switch. Obstacle Detection When closing: The liftagte will reverse to full open when it detects an obstacle. A chime will sound three t...

SECURICODE™ KEYLESS ENTRY KEYPAD (IF EQUIPPED) You can use the keypad to: • lock or unlock the doors • recall memory features (if equipped) • enable and disable autolock and autounlock • program and erase user codes • arm and disarm the anti-theft alarm (if equipped). The keypad can be operated with...

Erasing a Personal Code 1. Enter the factory set 5-digit code. 2. Press and release the 1 • 2 on the keypad within five seconds. 3. Press and hold the 1 • 2 for two seconds. This must be done within five seconds of completing Step 2. All personal codes are now erased and only the factory set 5- digi...

If your programmed transmitters or standard SecuriLock 威 coded keys (integrated keyhead transmitters only) are lost or stolen and you don’thave an extra coded key, you will need to have your vehicle towed to anauthorized dealer. The key codes need to be erased from your vehicleand new coded keys wil...

5. Press and release the brake pedal one time. The indicator on theSTART/STOP button should begin to rapidly flash, indicating theprogramming mode has been entered and two programmed intelligentaccess keys have been detected in the vehicle. 6. Press the START/STOP button within one minute. A message...

Disarming the Alarm To disarm the alarm, do any of the following: • Press the power door unlock button within the 20-second pre-armedmode. • Press the unlock button on the remote control. • Unlock the doors with the keyless entry pad. • Enter the vehicle using intelligent access (if equipped). • Tur...

ADJUSTING THE STEERING WHEEL WARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. Refer to Sitting In the Correct Position in the Seats chapter. 1. Unlock the steering column. 2. Adjust the steering wheel to thedesired p...

VOICE CONTROL (IF EQUIPPED) A. Phone mode B. Voice recognition Refer to the SYNC 威 or MyFord Touch 威 chapter. CRUISE CONTROL Type 1 Type 2 Refer to the Cruise Control chapter for information on this feature. SEEK VOL A B SET RES CNCL ON OFF GAP 84 Steering Wheel 2013 Edge (edg) Owners Guide gf, 2nd ...

WINDSHIELD WIPERS Note: Fully defrost the windshield in icy conditions before turning on the windshield wipers. Rotate the end of the control awayfrom you to increase the speed ofthe wipers. Rotate toward you todecrease the speed of the wipers. Press the stalk down and release fora single swipe of t...

WINDSHIELD WASHERS Note: Do not operate the wipers on a dry windshield. This may scratch the glass, damage the wiper blades or cause the wiper motor to burn out.Always use the windshield washer before wiping a dry windshield. Note: Do not operate the washer when the washer reservoir is empty. This m...

LIGHTING CONTROL A. Off B. Parking lamps, instrument panellamps, license plate lamps and taillamps C. Headlamps High Beams Push the lever forward to switch thehigh beams on. Push the lever forward again or pullthe lever toward you to switch thehigh beams off. Headlamp Flasher Pull toward you slightl...

AUTOLAMPS WARNING: In severe weather conditions, it may be necessary to switch your headlamps on manually. Note: If the vehicle is equipped with autolamps, it will have the windshield wiper rainlamp feature. When the windshield wipers are turned to low- or high-speed wiping during daylight, and the ...

HEADLAMP EXIT DELAY You can set the delay time to keep the headlamps on for up to threeminutes after the ignition is turned off. Follow the steps below to change the delay time (Steps 1 through 6must be done within 10 seconds): 1. Turn the ignition off. 2. Turn the lighting control to the autolamp p...

To activate: • the ignition must be in the on position and • the lighting control is in the off, autolamp, or parking lamp position. • the transmission is not in P (Park). DIRECTION INDICATORS The turn signal lever does not mechanically lock in the upward ordownward position when activated. The turn...

Front Row Map Lamps (If Equipped) To turn on the map lamps, press the outer edge of the clear lens. Thefront row map lamp lights when: • any door is opened. • the dome lamp button on theinstrument panel is activated. • the remote entry controls arepressed and the ignition is off. Map/dome lamp (if e...

POWER WINDOWS WARNING: Do not leave children unattended in the vehicle and do not let children play with the power windows. They may seriously injure themselves. WARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in t...

Accessory Delay You can use the window switches for several minutes after you turn theignition off, or until either front door is opened. Window Lock A. Unlock B. Lock Press the control to lock or unlock the rear window controls. EXTERIOR MIRRORS Power Exterior Mirrors WARNING: Do not adjust the mir...

Heated Exterior Mirror (If Equipped) Note: Do not remove ice from the mirrors with a scraper or attempt to readjust the mirror glass if it is frozen in place. These actions couldcause damage to the glass and mirrors. Note: Do not clean the housing or glass of any mirror with harsh abrasives, fuel or...

The approaching vehicle’s image issmall and near the inboard edge ofthe main mirror when it is at adistance. The image becomes largerand begins to move outboard acrossthe main mirror as the vehicleapproaches (A). Its image willtransition from the main mirror andbegin to appear in the blind spotmirro...

INTERIOR MIRROR WARNING: Do not adjust the mirror when your vehicle is moving. Note: Do not clean the housing or glass of any mirror with harsh abrasives, fuel or other petroleum or ammonia based cleaning products. You can adjust the interior mirror to your preference. Some mirrors alsohave a second...

Illuminated Visor Vanity Mirror (If Equipped) Lift the cover to switch on the lamp. PANORAMIC VISTA ROOF™ AND POWER SUNSHADES(IF EQUIPPED) WARNING: Do not let children play with the panoramic Vista Roof™ and power sunshade or leave children unattended in the vehicle. They may seriously hurt themselv...

Opening the Sunshade and Moonroof Note: The moonroof will only open after sunshades are completely open. Press and release the control toopen the sunshade. The front andrear sunshades open simultaneously. Press and release the control to open the moonroof. The moonroof willstop short of the fully op...

GAUGES Type 1 Cluster shown in standard measure – metric clusters similar. A. Tachometer B. Information display. See Information displays for more information. C. Speedometer D. Fuel gauge Fuel Gauge Indicates approximately how much fuel is left in the fuel tank (when theignition is on). The fuel ga...

Type 2 Cluster shown in standard measure – metric clusters similar. A. Information display. See Information displays for more information. B. Speedometer C. Infotainment display. See MyFord Touch™ for more information. WARNING LAMPS AND INDICATORS These lights can alert you to a vehicle condition th...

Adaptive cruise control (if equipped) (RTT) The speed control system indicator light changes color to indicate whatmode the system is in: • On (gray light): Illuminates when the adaptive cruise controlsystem is turned on. Turns off when the speed controlsystem is turned off. • Engaged (green light):...

Charging system (RTT) Illuminates when the battery is not charging properly. If it stayson while the engine is running, there may be a malfunction withthe charging system. Contact your authorized dealer as soon as possible. This indicates a problem with the electrical system or a relatedcomponent. D...

Low tire pressure warning Illuminates when your tire pressure is low. If the light remainson at start up or while driving, the tire pressure should bechecked. When the ignition is first turned to on, the light will illuminate for 3 seconds to ensure the bulb is working. If the light doesnot turn on ...

GENERAL INFORMATION WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that may take theirfocus off the road. Your primary responsibility is the safe operation of the...

†Trip 1 / 2 Compass (located in lower line of display). Note: this will also display in other menus.Total Odometer (located in lower line of display). Note: this will also display in other menus.†See Trip computer later in this section for more information. Information Intelligent AWD — Displays pow...

Settings Convenience Autolamp Delay Off or number of seconds Compass (nonMyFord Touchunits only) Display Calibrate (ifequipped) Hold OK toCalibrate Zone (1–15) DTE Calculation Normal or Towing Easy Entry/Exit Locks Autolock Autounlock Remote Unlock All Doors orDriver First Oil life Reset Set XXX% Po...

Compass (non MyFord/MyLincoln Touch units only) Displays the vehicle’s heading direction. To calibrate the compass: Enter the compass menu and select Calibrate.Follow the prompts. To set the compass zone: Enter the compass menu and select Set. Followthe prompts. See the diagram below to determine yo...

Main menu From the main menu bar on the left side of the information display, youcan choose from the following categories: Display Mode Trip 1 & 2 Fuel Economy Settings Information Scroll up/down to highlight one of the categories, then press the rightarrow key or OK to enter into that category....

Settings In this mode, you can configure different driver setting choices. Note: Some items are optional and may not appear. Driver Assist Traction Control On (default setting) / Off Blind Spot On (default on key cycle) / Off Collision Warning Sensitivity High / Normal / Low Chimes On (default on ke...

Units Distance Miles & Gal / Km & Liters Temperature Fahrenheit (°F) / Celsius (°C) Restore Defaults Hold OK to Restore Settings to Factory Defaults Information In this mode, you can view different vehicle system informationand perform a system check. Warnings XX Warnings Displays the number...

Alarm/Security Messages Action / Description To Stop Alarm, StartVehicle Displayed when the perimeter alarm system isarmed and the vehicle is entered using the keyon the driver’s side door. In order to preventthe perimeter alarm system from triggering,the ignition must be turned to start or onbefore...

Battery and Charging System Messages Action / Description Check ChargingSystem Displayed when the charging system needsservicing. If the warning stays on or continuesto come on, contact your authorized dealer assoon as possible. Turn Power Off toSave Battery Displayed when the battery managementsyst...

Collision Warning System Messages Action / Description Collision WarningMalfunction Displayed when there is a system malfunctionwith the collision warning system. The systemwill be disabled. Contact your authorizeddealer as soon as possible. Collision WarningDisplay Fault Displayed when there is a s...

Reminder Messages Action / Description Steering Lock TurnWheel to Unlock Displays when you need to turn the steeringwheel in order to disengage the steering lock. Shift to Park Displayed when the engine is turned off andshift select lever is in any position other thanP (Park). Tire Messages Action /...

GENERAL AUDIO INFORMATION Radio Frequencies and Reception Factors AM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Canadian Radio and TelecommunicationsCommission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.9–107.7, 107.9 MHz Radio rec...

Always handle discs by their edges only. Clean the disc with an approvedCD cleaner only, wiping from the center of the disc toward the edge. Donot clean in a circular motion. Do not expose discs to direct sunlight or heat sources for extendedperiods of time. MP3 Track and Folder Structure Audio syst...

When you select: You can: G. OK Allows you to confirm commands with specialphone and media features. If your vehicle isequipped with SYNC, refer to the SYNC chapter for more information. H. Eject Eject the CD. I. Power and Volume Press the power control to turn the system onand off.Turn to adjust th...

AM/FM SINGLE CD PREMIUM AUDIO SYSTEM WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that you use extreme caution when using any device or feature that may takeyour focus off the road. Your primary responsibility is the safe oper...

When you select: You can: E. Seek/Reverse/FastForward In radio mode, select a frequency band and press one of the seek buttons. The system stopsat the first station it finds in that direction. In SIRIUS mode, select the previous or next channel. If a specific category is selected, (Jazz,Rock, News, ...

AUXILIARY INPUT JACK WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that you use extreme caution when using any device or feature that may takeyour focus off the road. Your primary responsibility is the safe operationof the vehi...

Satellite Radio Reception Factors Potential satellite radio reception issues Antennaobstructions For optimal reception performance, keep theantenna clear of snow and ice build-up andkeep luggage and other material as far awayfrom the antenna as possible. Terrain Hills, mountains, tall buildings, bri...

MANUAL HEATING AND AIR CONDITIONING SYSTEM A. Fan speed control: Controls the volume of air circulated in your vehicle. Turn to select the desired fan speed or switch off. If you switchthe fan off, the windshield may fog up. B. Defrost: Distributes air through the windshield defroster vents and de-m...

G. MAX A/C: Distributes recirculated air through the instrument panel vents to cool the vehicle. This position is more economical and efficientthan normal A/C. H. Air distribution control: Press to set the air distribution to a position listed below: Distributes air through the windshield defroster ...

DUAL AUTOMATIC TEMPERATURE CONTROL SYSTEM Note: You can switch temperature units between Fahrenheit and Celsius. Refer to Menu features in the MyFord Touch or MyLincoln Touch chapter. A. Power/Driver temperature control: Press to turn the climate control system on and off. When the system is off, ou...

F. A/C: Press the button to turn air conditioning on or off. Air conditioning cools the vehicle using outside air. To improve air conditioning when startingyour vehicle, drive with the windows slightly open for two to three minutes.Use A/C with recirculated air to improve cooling performance and eff...

For maximum cooling performance MAX A/C in AUTO mode, press MAXA/C. For maximum cooling performance in panel or panel/floor modes:1. Move temperature control to the coolest setting.2. Select A/C and recirculated air to provide colder airflow.3. Set the fan to the highest speed initially, then adjust...

2. Set the temperature to LO.3. Set the fan to the highest blower setting. To aid in side window defogging/demisting in cold or humid weather:1. Select Floor/Panel.2. Select A/C.3. Adjust the temperature control to maintain comfort.4. Set the fan speed to the highest setting.5. Direct the outer inst...

REMOTE START CLIMATE OPERATION (IF EQUIPPED) The climate control system adjusts the cabin temperature during remotestart. You cannot adjust the system during remote start operation. Turn theignition on to return the system to its previous settings. You can nowmake adjustments. You will need to turn ...

SITTING IN THE CORRECT POSITION WARNING: Sitting improperly out of position or with the seatback reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system,resulting in serious injury or death in a crash. Always sit upright againstyour seatback...

MANUAL SEATS WARNING: Do not adjust the driver’s seat or seatback while the vehicle is moving. WARNING: Rock the seat backwards and forwards after releasing the lever to make sure that it is fully engaged. Moving the seats backwards andforwards Adjusting the height of thedriver’s seat WARNING: Alway...

Recline adjustment WARNING: Cover sharp edges on the load to help prevent injury to occupants. Secure the load to help prevent shifting during sudden stops. WARNING: Before returning the seatback to its original position, make sure that cargo or any objects are not trapped behind the seatback. After...

Lumbar adjustment POWER SEATS (IF EQUIPPED) WARNING: Never adjust the driver’s seat or seatback when the vehicle is moving. WARNING: Before returning the seatback to its original position, make sure that cargo or any objects are not trapped behind the seatback. 158 Seats 2013 Edge (edg) Owners Guide...

MEMORY FUNCTION (IF EQUIPPED) The memory control, located on theinstrument panel, allows automaticpositioning of the driver seat andpower mirrors to two programmablepositions. Programming a Memory Position Note: A memory position may be programmed at any time. • To program position 1, move the memor...

REAR SEATS WARNING: To prevent possible damage to the seat or safety belts, ensure that the safety belts are not buckled when folding the seatback. • Recline Seatback: With the seat occupied, pull the lever up to recline the seatback. • Fold Seatback: With the seat empty, pull the lever up to fold t...

REAR SEAT ARMREST Press the latch and pull the armrestforward for armrest/cupholder use. To access the cup holders, lift up one ofthe slotted areas on the cover. To close the armrest, close the cupholder cover and rotate the armrestrearward until the latch clicks. Seats 163 2013 Edge (edg) Owners Gu...

HOMELINK 姞 WIRELESS CONTROL SYSTEM (IF EQUIPPED) WARNING: Make sure that the garage door and security device are free from obstruction when you are programming. Do not program the system with the vehicle in the garage. WARNING: Do not use the system with any garage door opener that does not have the...

Erasing the Function Button Codes Note: You can not erase individual buttons. 1. Press and hold the outer twofunction buttons simultaneously forapproximately 20 seconds until theindicator lights above the buttonsflash rapidly. 2. When the indicator lights flash,release the buttons. The codes forall ...

4. Press and release the Genie Intellicode 2 hand-held transmitter’spreviously programmed button. Both indicator lights on the garage dooropener motor unit should now flash purple. 5. Press and hold the previously programmed button on the sun visor for2 seconds. Repeat this step up to 3 times until ...

AUXILIARY POWER POINTS Note: Do not insert objects other than an accessory plug into the power point. This will damage the outlet and blow the fuse. Note: Do not hang any type of accessory or accessory bracket from the plug. Note: Improper use of the power outlet can cause damage not covered by your...

CENTER CONSOLE WARNING: Use only soft cups in the cupholder. Hard objects can injure you in a collision. Your vehicle may be equipped with a variety of console features. A. Cupholders B. Two pen/pencil holders, traveltissue pack holder, and businesscard/paper holder. C. Rear powerpoint D. Utility co...

Fast Restart The fast restart feature allows you to restart your vehicle within20 seconds of switching the vehicle off, if a valid passive key is notpresent. Apply the brake pedal and press the start button for up to20 seconds. After 20 seconds have expired, you can no longer start yourvehicle witho...

We recommend that you do the following for safe and correct operation: • Use a 16-gauge outdoor extension cord that is product certified byUnderwriter’s Laboratory or Canadian Standards Association. Thisextension cord must be able to be used outdoors, in coldtemperatures, and be clearly marked Suita...

SAFETY PRECAUTIONS WARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler door (Easy Fuel 威 “no cap” fuel system), do not refuel unt...

• Avoid getting fuel liquid in your eyes. If fuel is splashed in the eyes,remove contact lenses (if worn), flush with water for 15 minutes andseek medical attention. Failure to seek proper medical attention couldlead to permanent injury. • Fuels can also be harmful if absorbed through the skin. If f...

Do not be concerned if your enginesometimes knocks lightly. However,if it knocks heavily while you areusing fuel with the recommendedoctane rating, see your authorized dealer to prevent any engine damage. RUNNING OUT OF FUEL Avoid running out of fuel because this situation may have an adverseeffect ...

When filling the vehicle’s fuel tank from a portable fuel container, use thefunnel included with the vehicle. 1. Locate the white plastic funnel in the spare tirecompartment. 2. Slowly insert the funnel into the capless fuelsystem. 3. Fill the vehicle with fuel from the portable fuelcontainer. 4. Wh...

Easy Fuel 姞 “No Cap” Fuel System WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler door, do not refuel until the sound stops. Otherwise, fuel may spray out, which could cause seriouspersonal injury. When fueling your vehicle: 1. Turn the engine off. 2. ...

EMISSION CONTROL SYSTEM WARNING: Do not park, idle, or drive your vehicle in dry grass or other dry ground cover. The emission system heats up the engine compartment and exhaust system, which can start a fire. WARNING: Exhaust leaks may result in entry of harmful and potentially lethal fumes into th...

AUTOMATIC TRANSMISSION WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn the ignition to the off position and remove the key whenever you leave your vehicle. Your vehicle has been designed to improve fuel economy by reducingfuel usage while coasting...

• Provides additional lower gear operation through the automatictransmission shift strategy which reacts to vehicle inputs (vehicleacceleration, accelerator pedal, brake pedal and vehicle speed). • Gears are selected more quickly and at higher engine speeds. Note: The system will stay in S (Sport) u...

If your vehicle is equipped with paddles on the steering wheel: • Pull the left paddle ( – ) todownshift the transmission. • Pull the right paddle (+) to upshiftthe transmission. Upshift to the recommended shift speeds according to the followingchart: Upshifts when accelerating (recommended for best...

Brake-shift interlock WARNING: Do not drive your vehicle until you verify that the brake lamps are working. WARNING: When doing this procedure, you will be taking the vehicle out of park which means the vehicle can roll freely. To avoid unwanted vehicle movement, always fully set the parking brakepr...

Hill start assist keeps your vehicle stationary long enough to move yourfoot from the brake pedal to the accelerator pedal when your vehicle ison a slope. The brakes are released automatically once the engine has developedsufficient drive to prevent the vehicle from rolling down the slope. Thisis an...

GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may beworn-out and should be inspected by an authorized dealer. If the vehiclehas continuous vibration or shudder in the steering wheel while ...

PRINCIPLES OF OPERATION The traction control system helps avoid drive wheel spin and loss oftraction. If your vehicle begins to slide, the system applies the brakes to individualwheels and, when needed, reduces engine power at the same time. If thewheels spin when accelerating on slippery or loose s...

PRINCIPLES OF OPERATION WARNING: Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction and/or wheel/tire size may change the handlingcharacteristics of the vehicle and may adversely affect the performanceof the AdvanceTrac 威 system. In...

SENSING SYSTEM (IF EQUIPPED) WARNING: To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed)objects when moving in reverse on a flat surface at parking speeds.Traffic control sy...

The system can be turned off using the information display control.Refer to the Information Display chapter. If a fault is present in the system, a warning message appears in the information display and doesnot allow the driver to switch the faulted system on. Note: If your vehicle is equipped with ...

Using the Rear View Camera System The rear view camera system displays what is behind your vehicle whenyou place the transmission in R (Reverse). The system uses two types ofguides to help you see what is behind your vehicle:1. Fixed guidelines: Show the actual path the vehicle is moving in while re...

Guidelines and the Centerline Note: Fixed guidelines are only available when the transmission is in R (Reverse). Note: The centerline is only available if fixed guidelines are on. A. Rear bumper B. Fixed guideline: Red zone C. Fixed guideline: Yellow zone D. Fixed guideline: Green zone E. Centerline...

Manual Zoom WARNING: When manual zoom is on, the full area behind the vehicle is not shown. Be aware of your surroundings when using the manual zoom feature. Note: Manual zoom is only available when the transmission is in R (Reverse). Note: When manual zoom is enabled, only the centerline is shown. ...

PRINCIPLES OF OPERATION Cruise control lets you maintain a set speed without keeping your footon the accelerator pedal. USING CRUISE CONTROL WARNING: Do not use cruise control in heavy traffic or on roads that are winding, slippery or unpaved. Note: Vehicle speed may vary momentarily when driving up...

The system is designed to automatically adjust your speed to maintain aproper distance between you and the vehicle in front of you in the samelane. The driver can select from one of four GAP settings, the controlsare located on the steering wheel. At startup, the system sets the gap to the last sele...

Following a Vehicle WARNING: When following a vehicle in front of you, the vehicle will not decelerate automatically to a stop, nor will the vehicle always decelerate quickly enough to avoid a collision without driverintervention. Always apply the brakes when necessary. Failing to do somay result in...

Detection Issues The radar sensor has a limited field of vision. It may not detect vehicles atall or detect a vehicle later than expected in some situations. The leadvehicle graphic will not illuminate if a vehicle is not detected in front of you. Detection issues can occur: A. When driving on a dif...

Blocked Sensor WARNING: Do not use ACC when towing a trailer with brake controls. Aftermarket trailer brakes will not function properly when ACC is activated because the brakes are electronically controlled.Failing to do so may result in loss of vehicle control, which could resultin serious injury. ...

Cause Action Swirling water, or snow or ice onthe surface of the road mayinterfere with the radar signals Do not use ACC in these conditionbecause it may not detect, warn,or respond to potential collisions. Desert / remote area with no othervehicles and no roadside objects Wait a short time or switc...

BLIND SPOT INFORMATION SYSTEM (BLIS 姞 ) WITH CROSS TRAFFIC ALERT (CTA) (IF EQUIPPED) WARNING: To help avoid injuries, NEVER use the BLIS 威 as a replacement for using the interior and exterior mirrors and looking over your shoulder before changing lanes. BLIS 威 is not a replacement for careful drivin...

Using the Systems BLIS 威 turns on when the engine is started and the vehicle is driven forward above 3 mph (5 km/h); it remains on while the transmission is inD (Drive) and N (Neutral). If shifted out of D (Drive) or N (Neutral),the system enters CTA mode. Once shifted back into D (Drive), BLIS 威 tu...

Zone coverage also decreases when parking at shallow angles. Here, theleft sensor is mostly obstructed; zone coverage on that side is severelylimited. System Lights and Messages The BLIS 威 and CTA systems illuminate a yellow alert indicator inthe outside mirror on the side ofthe vehicle the approach...

Switching the Systems Off and On One or both systems can be switched off temporarily by using theinformation display control; refer to the Information Display chapter. When the BLIS 威 is switched off, the driver does not receive alerts and the information display shows BLIND SPOT SYS OFF and/or CTAS...

If it is, a red warning lightilluminates and an audible warningchime sounds. The brake support system assists the driver in reducing the collisionspeed by charging the brakes. If the risk of collision further increasesafter the warning light illuminates, the brake support prepares the brakesystem fo...

Blocked Sensors If a message regarding a blockedsensor appears in the informationdisplay, the radar signals from thesensor have been obstructed. Thesensors are located behind a fasciacover near the driver side of thelower grille. When the sensors areobstructed, a vehicle ahead cannot bedetected and ...

System Limitations WARNING: The collision warning system’s brake support can only help reduce the speed at which a collision occurs if the driver applies the vehicle’s brakes. The brake pedal must be pressedjust like any typical braking situation. Due to the nature of radar technology, there may be ...

STEERING To help prevent damage to the power steering system: • Never hold the steering wheel at its furthest turning points (until itstops) for more than three to five seconds while the engine is running. • Do not operate the vehicle with a low power steering pump fluidreservoir level (below the MI...

CARGO NETS WARNING: This net is not designed to restrain objects during a collision or heavy braking. The cargo net secures lightweight objects in the cargo area. Attach the net to the anchors provided in one of the two configurations.Repeat the attachment on both sides of the vehicle. Type 1 Load C...

ROOF RACKS AND LOAD CARRIERS (IF EQUIPPED) WARNING: When loading the roof rail crossbars, it is recommended to evenly distribute the load, as well as maintain a low center of gravity. Loaded vehicles, with higher centers of gravity,may handle differently than unloaded vehicles. Extra precautions, su...

UTILITY HOOK The utility hook can be used tohang small items such as grocerybags, etc. Do not hang more than10 pounds (4.5 kilograms) on thehook. LOAD LIMIT Vehicle Loading – With and Without a Trailer This section will guide you in the proper loading of your vehicle and/ortrailer, to keep your load...

Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Label on the B-Pillar or the edge of the driver’s door(vehicles exported outside the US and Canada may not have a TireLabel). Look for “THE COMBINED WEI...

Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue loadweight is also part of cargo weight. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all pa...

GVWR (Gross Vehicle Weight Rating) – is the maximum allowable weight of the fully loaded vehicle (including all options, equipment,passengers and cargo). The GVWR is shown on the Safety Compliance Certification Label. The label shall be affixed toeither the door hinge pillar, door-latch post, or the...

WARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structuraldamage, serious damage to the vehicle, loss of control and personalinjury. GCW (Gross Combined Weight) – is the...

WARNING: Do not use replacement tires with lower load carrying capacities than the original tires because they may lower the vehicle’s GVWR and GAWR limitations. Replacement tires with ahigher limit than the original tires do not increase the GVWR andGAWR limitations. WARNING: Exceeding any vehicle ...

TOWING A TRAILER WARNING: Do not exceed the GVWR or the GAWR specified on the certification label. WARNING: Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of the vehicle and could result in engine damage, transmission damage, structural damage, lossof vehicle c...

This feature applies the vehicle brakes at individual wheels and, ifnecessary, reduces engine power. If the trailer begins to sway, thestability control light flashes and the message TRAILER SWAY REDUCE SPEED appears in the information display. The first thing to do is slow the vehicle down, then pu...

ESSENTIAL TOWING CHECKS Follow these guidelines to ensure safe towing: • Do not tow a trailer until your vehicle has been driven at least1000 miles (1600 kilometers). • Consult your local motor vehicle laws for towing a trailer. • Refer to the instructions included with towing accessories for thepro...

To connect the safety chains, cross them under the trailer tongue andallow enough slack for turning tight corners. Do not allow the chains todrag on the ground. Trailer Brakes WARNING: Do not connect a trailer’s hydraulic brake system directly to your vehicle’s brake system. Your vehicle may not hav...

WRECKER TOWING If you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, yourroadside assistance service provider. It is recommended that your vehicle be towed with a wheel lift anddollies or flatbed equipment. Do not tow w...

TOWING THE VEHICLE ON FOUR WHEELS Emergency Towing In the event your vehicle becomes disabled (without access to wheeldollies, car-hauling trailer, or flatbed transport vehicle), it can beflat-towed (all wheels on the ground, regardless of thepowertrain/transmission configuration) under the followin...

BREAKING-IN You need to break in new tires for approximately 300 miles(480 kilometers). During this time, your vehicle may exhibit some uniquedriving characteristics. Avoid driving too fast during the first 1000 miles(1600 kilometers). Vary your speed frequently and change up throughthe gears early....

• Carry unnecessary weight (approximately 1 mpg [0.4 km/L] is lost forevery 400 lb [180 kg] of weight carried). • Add particular accessories to your vehicle (e.g. bug deflectors,rollbars/light bars, running boards, ski racks). • Drive with the wheels out of alignment. DRIVING THROUGH WATER WARNING: ...

FLOOR MATS WARNING: Always use floor mats that are designed to fit the foot well of your vehicle. Only use floor mats that leave the pedal area unobstructed. Only use floor mats that are firmly secured toretention posts so that they cannot slip out of position and interferewith the pedals or impair ...

WARNING (Continued) • Failure to properly follow floor mat installation or attachmentinstructions can potentially cause interference with pedal operationcausing loss of control of vehicle. • To install floor mats, position the floor mat so that the eyelet is overthe retention post and press down to ...

ROADSIDE ASSISTANCE Vehicles sold in the U.S. : Getting roadside assistance To fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program. Thisprogram is separate from the New Vehicle Limited Warranty. The serviceis available: • 24-hours,...

U.S. Ford vehicle customers who require Roadside Assistance, call1-800-241-3673. If you need to arrange roadside assistance for yourself, Ford MotorCompany will reimburse a reasonable amount for towing to the nearestdealership within 35 miles (56 km). To obtain reimbursementinformation, U.S. Ford ve...

Connecting the Jumper Cables WARNING: Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery. Note: Do not attach the negative (-) cable to fuel lines, engine rocker covers, the intake...

Removing the Jumper Cables Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. Remove the jumper cables in the reverse order that they wereconnected. 1. Remove the jumper cable fromthe ground metal surface. 2. Remove the jumper cable on thenega...

GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorizeddealer. While any authorized dealer handling your vehicle line willprovide warranty service, we recommend you return to your sellingauthorized dealer who wants to ensure your continued satisfaction. Plea...

• Ford Genuine Accessories • Service specials and promotions. In Canada: Mailing address Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E4 Telephone 1-800-565-3673 (FORD) Online www.ford.ca Additional assistance If you have questions or concerns,...

UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY) For vehicles delivered to authorized Canadian dealers. In those caseswhere you continue to feel that the efforts by Ford of Canada and theauthorized dealer to resolve a factory-related vehicle service concernhave been unsatisfactory, Ford of C...

CHANGING A FUSE Fuses If electrical components in the vehicleare not working, a fuse may haveblown. Blown fuses are identified by abroken wire within the fuse. Checkthe appropriate fuses before replacingany electrical components. Note: Always replace a fuse with one that has the specified amperage r...

FUSE SPECIFICATION CHART Power Distribution Box WARNING: Always disconnect the battery before servicing high current fuses. WARNING: To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs. The power dis...

Fuse/Relay Number Fuse Amp Rating Protected Components 86 7.5A* PCM relay, PCM keep-alive(3.5/3.7L engines) 87 5A* Run/start relay 88 — Run/start relay 89 — Not used 5A* Headlamp leveling motors (Chinaonly) 90 10A* PCM, Transmission ControlModule (TCM) (2.0L engine) 91 10A* Adaptive cruise control (...

To reinstall the trim panel, align the tabs on the bottom of the panel withthe grooves, push the panel shut and slide the release lever to the left tosecure the panel. To remove a fuse, use the fuse puller tool provided on the fuse panel cover. The fuses are coded as follows. Fuse/Relay Number Fuse ...

GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthinessand resale value. There is a large network of Ford authorized dealers thatare there to help you with their professional servicing expertise. We believethat their specially trained technicians are best qualifi...

OPENING AND CLOSING THE HOOD 1. Inside the vehicle, pull the hoodrelease handle located under thebottom of the instrument panel nearthe steering column. 2. Go to the front of the vehicle andrelease the secondary hood latchthat is located under the frontcenter of the hood. 3. Lift the hood and suppor...

ENGINE OIL DIPSTICK A. – MIN B. – MAX ENGINE OIL CHECK Note: Check the level before starting the engine. Note: Make sure that the level is between the MIN and MAX marks. 1. Make sure that your vehicle is on level ground. 2. Turn the engine off and wait 10 minutes for the oil to drain into theoil pan...

ENGINE COOLANT CHECK Checking the Engine Coolant The concentration and level of engine coolant should be checked at theintervals listed in Scheduled Maintenance Information. Note: Make sure that the level is between the COLD FILL RANGE marks on the coolant reservoir. Note: Coolant expands when it is...

Recycled engine coolant Ford Motor Company does NOT recommend the use of recycled enginecoolant since a Ford-approved recycling process is not yet available. Used engine coolant should be disposed of in an appropriate manner. Follow your community’s regulations and standards for recyclingand disposi...

You may notice a reduction in the vehicle’s speed caused by reducedengine power. Your vehicle has been designed to enter this mode ifcertain high temperature/high load conditions take place in order tomanage the engine’s fluid temperatures. The amount of speed reductionwill depend on the vehicle loa...

What you should know about fail-safe cooling If the engine coolant supply is depleted, this feature allows the vehicle tobe driven temporarily before incremental component damage is incurred.The “fail-safe” distance depends on ambient temperatures, vehicle loadand terrain. How fail-safe cooling work...

WARNING: Never remove the coolant reservoir cap while the engine is running or hot. You have limited engine power when in the fail-safe mode, so drive thevehicle with caution. The vehicle will not be able to maintain high-speedoperation and the engine will run rough. Remember that the engine iscapab...

3. With the parking brake engaged and your foot on the brake pedal,start the engine and move the gearshift lever through all of the gearranges. Allow a minimum of 10 seconds for each gear to engage. 4. Latch the gearshift lever in P (Park) and leave the engine running. 5. Remove the dipstick, wiping...

transmission is not working properly, (i.e., if the transmission slips orshifts slowly) or if you notice some sign of fluid leakage. Do not use supplemental transmission fluid additives, treatments orcleaning agents. The use of these materials may affect transmissionoperation and result in damage to...

WASHER FLUID CHECK WARNING: If you operate your vehicle in temperatures below 40°F (5°C), use washer fluid with antifreeze protection. Failure to use washer fluid with antifreeze protection in cold weather couldresult in impaired windshield vision and increase the risk of injury oraccident. Add flui...

Note: Always dispose of automotive batteries in a responsible manner. Follow your local authorized standards for disposal. Call your localauthorized recycling center to find out more about recycling automotivebatteries. Because your vehicle’s engine is electronically controlled by a computer,some co...

CHANGING THE WIPER BLADES 1. Pull the wiper arm away from thevehicle. Turn the blade at an anglefrom the wiper arm. Press the locktab to release the blade and pull thewiper blade down toward thewindshield to remove it from the arm. 2. Attach the new wiper to the wiperarm and press it into place unti...

4. Attach the new wiper to the wiperarm and press it into place until aclick is heard. If you find this procedure too difficult,please see your dealer. AIR FILTER CHECK WARNING: To reduce the risk of vehicle damage and/or personal burn injuries do not start your engine with the air cleaner removed a...

For Vehicles with Halogen Headlamps: On the wall or screen you willobserve a flat zone of high intensitylight located at the top of the righthand portion of the beam pattern. Ifthe top edge of the high intensitylight zone is not at the horizontalreference line, the headlamp willneed to be adjusted. ...

Examples of acceptable condensation are: • Presence of thin mist (no streaks, drip marks or droplets) • Fine mist covers less than 50% of the lens Examples of unacceptable moisture (usually caused by a lamp waterleak) are: • Water puddle inside the lamp • Large water droplets, drip marks or streaks ...

WAXING • Wash the vehicle first. • Use a quality wax that does not contain abrasives. • Do not allow paint sealant to come in contact with any non-body(low-gloss black) colored trim, such as grained door handles, roofracks, bumpers, side moldings, mirror housings or the windshield cowlarea. The pain...

If a staining liquid like coffee/juice has been spilled on the instrumentpanel or on interior trim surfaces, clean as follows: 1. Wipe up spilled liquid using a clean, white, cotton cloth. 2. Wipe the surface with a damp, clean, white cotton cloth. For morethorough cleaning, use a mild soap and wate...

• Never apply any cleaning chemical to hot or warm wheel rims orcovers. • Some automatic car washes may cause damage to the finish on yourwheel rims or covers. Industrial-strength (heavy-duty) cleaners, orcleaning chemicals, in combination with brush agitation to removebrake dust and dirt, could wea...

Miscellaneous • Make sure all linkages, cables, levers and pins under vehicle arecovered with grease to prevent rust. • Move vehicles at least 25 feet (8 meters) every 15 days to lubricateworking parts and prevent corrosion. Removing Vehicle from Storage When your vehicle is ready to come out of sto...

GENERAL INFORMATION Important Information for P265/40R22 Low-profile Tires and Wheels Note: Your vehicle’s warranty does not cover these types of damage. Tires should always be kept at the correct inflation pressures and extracaution should be taken when operating on rough roads to avoid impactsthat...

How Your Vehicle Differs from Other Vehicles Crossover vehicles can differ fromsome other vehicles in a fewnoticeable ways. Your vehicle may be: • Higher – to allow higher loadcarrying capacity. • Shorter – to give it the capabilityto approach inclines. All otherthings held equal, a shorterwheelbase...

U.S. Department of Transportation-Tire quality grades: The U.S. Department of Transportation requires Ford Motor Company to give youthe following information about tire grades exactly as the governmenthas written it. Treadwear The treadwear grade is a comparative rating based on the wear rate ofthe ...

INFORMATION CONTAINED ON THE TIRE SIDEWALL Both U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the sidewall of all tires. Thisinformation identifies and describes the fundamental characteristics ofthe tire and also provides a U.S. DOT Tire Identifi...

F. 95: Indicates the tire’s load index. It is an index that relates to how much weight a tire can carry. You may find this information in yourowner’s manual. If not, contact a local tire dealer. Note: You may not find this information on all tires because it is not required by federal law. G. H: Ind...

Information on “T” Type Tires “T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below: T145/80D16 is an example of a tiresize. Note: The temporary tire size for your vehicle may be different fromthis example. Tire Quality Gradesdo not apply ...

INFLATING YOUR TIRES Safe operation of your vehicle requires that your tires are properlyinflated. Remember that a tire can lose up to half of its air pressurewithout appearing flat. Every day before you drive, check your tires. If one looks lower than theothers, use a tire gauge to check pressure o...

Maximum Permissible Inflation Pressure is the tire manufacturer’s maximum permissible pressure and/or the pressure at which themaximum load can be carried by the tire. This pressure is normallyhigher than the manufacturer’s recommended cold inflation pressurewhich can be found on the Safety Complian...

5. Repeat this procedure for each tire, including the spare. Note: Some spare tires operate at a higher inflation pressure than the other tires. For T-type/mini-spare tires (see the Dissimilar spare tire and wheel assembly information section for description): Store and maintain at 60 psi (4.15 bar)...

Damage Periodically inspect the tire treads and sidewalls for damage (such asbulges in the tread or sidewalls, cracks in the tread groove andseparation in the tread or sidewall). If damage is observed or suspectedhave the tire inspected by a tire professional. Tires can be damagedduring off-road use...

Tire Replacement Requirements WARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus LT-metric or all-season versus all-terrain) as those originallyprovided by Ford. The recommended tire and wheel size may be found oneither t...

Your vehicle is equipped with tires designed to provide a safe ride andhandling capability. Important: Remember to replace the wheel valve stems when the road tires are replaced on your vehicle. It is recommended that the two front tires or two rear tires generally bereplaced as a pair. The tire pre...

Tire and Wheel Alignment A bad jolt from hitting a curb or pothole can cause the front end of yourvehicle to become misaligned or cause damage to your tires. If yourvehicle seems to pull to one side when you’re driving, the wheels may beout of alignment. Have an authorized dealer check the wheel ali...

USING SNOW CHAINS WARNING: Snow tires must be the same size, load index, speed rating as those originally provided by Ford. Use of any tire or wheel not recommended by Ford can affect the safety and performanceof your vehicle, which could result in an increased risk of loss of vehiclecontrol, vehicl...

TIRE PRESSURE MONITORING SYSTEM WARNING: The tire pressure monitoring system is NOT a substitute for manually checking tire pressure. The tire pressure should be checked periodically (at least monthly) using a tire gauge,see Inflating your tires in this chapter. Failure to properly maintain your tir...

telltale after replacing one or more tires or wheels on your vehicle toensure that the replacement or alternate tires and wheels allow theTPMS to continue to function properly. The tire pressure monitoring system complies with part 15 of the FCCrules and with RSS-210 of Industry Canada. Operation is...

When You Believe Your System Is Not Operating Properly The main function of the tire pressure monitoring system is to warn youwhen your tires need air. It can also warn you in the event the system isno longer capable of functioning as intended. Please refer to thefollowing chart for information conc...

Low tirepressurewarning light Possible cause Customer action required Flashingwarning light Spare tire in use Repair the damaged road wheel/tire and reinstall it on the vehicle torestore system functionality. For adescription on how the systemfunctions, refer to When your temporary spare tire is ins...

CHANGING A ROAD WHEEL WARNING: The use of tire sealants may damage your tire pressure monitoring system (TPMS) and should not be used. However, if you must use a sealant, the TPMS sensor and valve stem onthe wheel must be replaced by an authorized Ford dealer. WARNING: Refer to Tire pressure monitor...

• Ground clearance and parking at curbs • Winter weather driving capability • Wet weather driving capability • All-wheel driving capability (if applicable) • Load leveling adjustment (if applicable) When driving with the full-size dissimilar spare tire and wheel assembly,additional caution should be...

8. The vehicle jacking points are shown here, and are depicted on theyellow warning label on the jack. Jack at the specified locations to avoid damage to the vehicle. 9. Small arrow-shaped marks on the sills show the location of the jackingpoints. 10. Remove the lug nuts with the lug wrench. 11. Rep...

TECHNICAL SPECIFICATIONS Wheel Lug Nut Torque Specifications WARNING: When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum orbrake disc that contacts the wheel. Ensure that any fast...

VEHICLE IDENTIFICATION NUMBER The vehicle identification number islocated on the driver sideinstrument panel. Please note that in the graphic,XXXX is representative of yourvehicle identification number. The Vehicle Identification Number (VIN) contains the followinginformation: A. World manufacturer ...

ACCESSORIES For a complete listing of the accessories that are available for yourvehicle, please contact your dealer or visit our online store at: Accessories.Ford.com (U.S. only). Ford Custom Accessories are available for your vehicle through yourlocal Ford or Ford of Canada dealer. Ford Motor Comp...

FORD ESP EXTENDED SERVICE PLANS (U.S. ONLY) More than 32 million Ford and Lincoln owners have discovered thepowerful protection of Ford ESP. It is the only extended service planbacked by Ford Motor Company, and provides “peace of mind”protection beyond the New Vehicle Limited Warranty coverage. Up t...

FORD ESP EXTENDED SERVICE PLANS (CANADA ONLY) You can get more protection for your vehicle by purchasing a FordExtended Service Plan (ESP). Ford ESP is the only service contractbacked by Ford Motor Company of Canada, Limited. Depending on theplan you purchase, Ford ESP provides benefits such as: • R...

GENERAL MAINTENANCE INFORMATION Why Maintain Your Vehicle? Carefully following the maintenance schedule helps protect against majorrepair expenses resulting from neglect or inadequate maintenance andmay also help to increase the value of your vehicle when you sell ortrade it. Keep all receipts for c...

They can perform any services that are required on your vehicle, fromgeneral maintenance to collision repairs. Note: Not all dealers have extended hours or bodyshops. Please contact your dealer for details. Protecting Your Investment Maintenance is an investment that will pay dividends in the form o...

Additives and Chemicals Ford Motor Company recommended additives and chemicals are listed inthis book and in the Workshop Manual. Additional chemicals or additives not approved by Ford Motor Company and are notrecommended as part of normal maintenance. Please consult your Warranty Manual for complet...

NORMAL SCHEDULED MAINTENANCE AND LOG Intelligent Oil Life Monitor 姞 Your vehicle is equipped with an Intelligent Oil Life Monitor 威 that determines when the engine oil should be changed based on how yourvehicle is used. By using several important factors in its calculations, themonitor helps reduce ...

Normal Scheduled Maintenance * At every oil changeinterval as indicated bythe message center Change engine oil and filter. ** Rotate tires, inspect tire wear and measuretread depth. Perform multi-point inspection(recommended). Inspect automatic transmission fluid level (ifequipped with dipstick). Co...

Additional Maintenance Items 1 Every 20000 miles(32000 km) Replace cabin air filter (if equipped). Every 30000 miles(48000 km) Replace engine air filter. At 100000 miles(160000 km) Change engine coolant. 2 Every 100000 miles(160000 km) Replace spark plugs. Inspect accessory drive belt(s). 3 Every 15...

Maintenance Schedule Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ...

Special Operating Condition Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D A...

EXCEPTIONS There are several exceptions to the Normal Schedule. They are listedbelow: Normal vehicle axle maintenance: Rear axles and power take-off (PTO) units with synthetic fluid and light-duty trucks equipped withFord-design axles are lubricated for life; do not check or change fluidunless a lea...

Engine air filter & cabin air filter replacement: Engine air filter and cabin air filter life is dependent on exposure to dusty and dirtyconditions. Vehicles operated in these conditions will require frequentinspection and replacement of the engine air filter and cabin air filter. ENGINE COOLANT...

GENERAL INFORMATION Ensure that you review your device’s user guide before using it with SYNC. Support The SYNC support team is available to help you with any questions youcannot answer on your own. Monday-Saturday, 8:30 am-8pm EST In the United States, call: 1–888–270–1055 In Canada, call: 1–800–56...

Privacy Information When a cellular phone is connected to SYNC, the system creates aprofile within your vehicle that is linked to that cellular phone. Thisprofile is created in order to offer you more cellular features and tooperate more efficiently. Among other things, this profile may containdata ...

Phone Options during an Active Call During an active call, you have additional menu features which becomeavailable such as putting a call on hold, joining calls, etc. Use the arrowbuttons to scroll through the menu options. To access:1. Press MENU during an active call.2. When Active Call Menu is se...

When you select: You can: Call History Access your call history log.1. Press OK to select, then scroll through yourcall history options (incoming, outgoing ormissed).2. Press OK when the desired selection appearsin the display.3. Press the phone button to call the selection. Return Exit the current ...

Text Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages.The system can also read incoming text messages to you so that you donot have to take your eyes off the road. Receiving a Text Message Note: This is a phone-dependent feature. ...

Delete All Messages? allows you to delete current text messages from SYNC (not your phone). To delete the messages, press OK to select. Thedisplay indicates when all your text messages have been deleted andSYNC returns you to the text message menu. Note: SYNC does not automatically download all of y...

Accessing Your Phone Settings These are phone-dependent features. Your phone settings allow you toaccess and adjust features such as your ring tone, text messagenotification, modify your phone book and also set up automatic download.1. Press the phone button.2. Scroll until Phone Settings appears, t...

When you select: You can: Auto Download Automatically download your phone book each timeyour phone connects to SYNC.Press OK to select. When Auto DownloadOn? appears, press OK to have your phonebookautomatically downloaded each time.Select Off to NOT download your phonebook everytime your phone conn...

If you select: You can: Set As PrimaryPhone? Set a previously paired phone as your primaryphone.Press OK to select and scroll to select thedesired phone. Press OK to confirm Note: SYNC attempts to connect with the primary phone at every ignition cycle. When aphone is selected as primary, it appears ...

Advanced Menu Options This menu allows you to access settings such as prompts, languages,defaults, perform a master reset, install an application and view systeminformation.1. Press the phone button to enter the Phone Menu.2. Scroll until System Settings appears and press OK.3. Scroll until Advanced...

If you select: You can: Master Reset Completely erase all information stored onSYNC (phonebook, call history, text messagesand paired devices) and return to the factorydefault settings.Press OK to select. The display indicateswhen complete and SYNC takes you back tothe Advanced menu. Install Applica...

911 Assist Privacy Notice Once 911 Assist is set on, it may disclose to emergency services that thevehicle has been in a crash involving the deployment of an airbag oractivation of the fuel pump shut-off. Certain versions or updates to 911Assist may also be capable of electronically or verbally disc...

2. Follow the voice prompts to select your destination. Once your destination is selected, your current vehicle location is uploaded anda route based on current traffic conditions is calculated and sentback to your vehicle. After the route download is complete, thephone call is automatically ended. ...

SYNC Services Quick Tips Portable Your subscription is associated with yourBluetooth-enabled cellular phone number, notyour VIN (Vehicle Identification Number). Youcan pair and connect your phone to anyvehicle equipped with Traffic, Directions andInformation and continue enjoying yourpersonalized se...

“USB” “Play track <name>” 1,3 “Refine album <name>” 1,3 “Refine artist <name>” 1,3 “Refine song <name>” 1 “Refine track <name>” 1,3 “Repeat off” “Repeat on” “Search album <name>” 1,3 “Search artist <name>” 1,3 “Search genre <name>” 1,3 “Search song <...

Voice Command Guide “Search/Play Genre” The system searches all the data from yourindexed music and, if available, begins to playthe chosen type of music. You can only playgenres of music which are present in theGENRE metadata tags that you have on yourdigital media player. “Similar Music” The syste...

2. Scroll to cycle through: When you select: You can: Play Menu Play your music by artist, album, genre, playlists,tracks, similar music or to simply, play all. You canalso choose to Explore USB to view the supporteddigital music files on your playing device.Refer to Play Menu later in this section ...

When you select: You can: Similar Music Play music similar to what is currently playingfrom the USB port. The system uses themetadata information of each song to compilea playlist for you.Press OK to select. The system creates a newlist of similar songs and begin playing. Themetadata tags must be po...

When you select: You can: Master Reset Completely erase all information stored onSYNC (all phonebook, call history, textmessages and all paired devices) and returnto the factory default settings. Application Download new software applications (ifavailable) and then load the desiredapplications throu...

Phone issues Issue Possible Cause(s) Possible Solution(s) I’m having troubleconnecting myphone to SYNC. • This is a phone-dependentfeature, OR • Possible phone malfunction. • Go to the website to review your phone’s compatibility. • Try turning off the device, resetting the device or removingthe dev...

Voice command issues Issue Possible Cause(s) Possible Solution(s) SYNC does notunderstand or iscalling the wrongcontact when Iwant to make acall. You may be usingthe wrong voicecommands, ORYou may not besaying the nameexactly as it issaved, ORContacts in yourphonebook maybe very short andsimilar, or...

INTRODUCTION WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsibility is the safeoperation of the vehicle...

HOME Press to access your home screen. Depending on your vehicle’soption package and software, your screens may vary in appearance from the screens shown in this section. Your features mayalso be limited depending on your market. Check with your authorizeddealer for availability. Using the Touch-sen...

Cleaning the Touchscreen Display Clean the display with a clean, soft cloth such as one used for cleaningglasses. If dirt or finger prints are still visible, apply a small amount ofalcohol to the cloth. Do not pour or spray alcohol onto the display. Donot use detergent or any type of solvent to clea...

Navigation Climate You can make selections from the menu by using the OK button. Theselection menu expands and you are allowed different options. • Press the up and down arrows to scroll through the modes. • Press the right arrow to enter the mode. • Press the left or right arrows to make adjustment...

How to Use Voice Commands with Your System Press the voice icon; after the tone, speak your commandclearly. These commands can be said at any time “Cancel” “Exit” “Go back” “List of commands” “Main menu” “Next page” “Previous page” “What can I say?” “Help” What Can I Say To access the available voic...

Voice command list “Navigation list of commands” * “Phone list of commands” “Radio list of commands” “SD card list of commands” “Sirius satellite list of commands” * “Travel link list of commands” * “USB list of commands” “Voice instructions list of commands” “Voice settings list of commands” “Help”...

Phone/Media Candidate Lists: Candidate lists are a list of possible results from your voice commands. The system creates these lists whenit has the same confidence level of several options based on your voicecommand. To access these settings using the touchscreen:1. Press the Menu icon > Settings...

ENTERTAINMENT Your system offers many media options. You can access these optionsusing the touchscreen or voice commands. Browsing Device Content When listening to any type of audio, you can browse through otherdevices without having to change sources. For example, if you arecurrently listening to t...

AM/FM Radio Press the lower left corner of the touchscreen and then selectthe AM or FM tabs. To change between AM and FM presets, just touch the AM or FM tabs. When you select: You can: Presets Save a station by pressing and holding one ofthe memory preset areas. There is a briefmute while the stati...

HD Radio Reception and Station Troubleshooting Potential reception issues Reception area If you are listening to a multicast station andyou are on the fringe of the reception area,the station may mute due to weak signalstrength.If you are listening to HD1, the systemswitches back to the analog broad...

Radio Voice Commands If you are listening to the radio, press the voice button on thesteering wheel controls. When prompted, say any of thecommands in the following chart. If you are not listening to the radio, press the voice button and, after thetone, say “Radio”, then any of the commands in the f...

“TUNE” “FM” “Preset <#>” “FM <87.9–107.9>” “Help” “FM <87.9-107.9> HD <#>” * * If available. SIRIUS 姞 Satellite Radio (If Activated) Press the lower left corner of the touchscreen, then select theSIRIUS tab. When you select: You can: Presets Save a station by pressing and hol...

Satellite Radio Voice Commands If you are listening to SIRIUS satellite radio, press the voicebutton on the steering wheel controls. When prompted, say anyof the commands in the following chart. If you are not listening to SIRIUS satellite radio, press the voice buttonand, after the tone, say “Siriu...

“TUNE” “SAT 2 preset <#>” “SAT 3” “SAT 3 preset <#>” “Help” SIRIUS Satellite Radio Information Note: SIRIUS reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particularchannels, and its prices, at any time, with or witho...

SIRIUS troubleshooting tips Radio Display Condition Possible Action Unsubscribed Channel Subscription notavailable for thischannel. Contact SIRIUS at1–888–539–7474 tosubscribe to thechannel, or tune toanother channel. No Signal Loss of signal from theSIRIUS satellite orSIRIUS tower to thevehicle ant...

CD Press the lower left corner of the touchscreen, then select theCD tab. When you select: You can: Repeat Choose to repeat the currently playing track,all tracks on the disc or turn the feature off ifalready on. Shuffle Play the tracks or entire albums in randomorder, or turn the feature off if alr...

SD Card Slot and USB Port SD Card Slot Note: Your SD card slot is spring-loaded. To remove the SD card, press the card in and the system ejects it. Do not attempt to pull the card toremove it as this could cause damage. The card slot can be used for your navigation card (if equipped). Referto Naviga...

SD Card and USB Voice Commands If you are listening to a USB device or an SD card, press thevoice button on the steering wheel controls. When prompted,say any of the commands in the following chart. If you are not listening to a USB device or an SD card, press the voicebutton and, after the tone, sa...

“BROWSE” “All audiobooks” “Audiobook <name>” “All authors” “Author <name>” “All composers” “Composer <name>” “All folders” “Folder <name>” “All genres” “Genre <name>” “All movies” * “Playlist <name>” “All music videos” * “Podcast <name>” “All playlists” “TV ...

Bluetooth voice commands “Browse album <name>” “Browse composer <name>” “Play genre <name>” “Browse all albums” “Browse folder <name>” “Play playlist <name>” “Browse all artists” “Browse genre <name>” “Play podcast episode <name>” “Browse all audiobooks” ”Br...

Note: For safety reasons, connecting or adjusting the settings on your portable music player should not be attempted while the vehicle ismoving. Also, the portable music player should be stored in a securelocation, such as the center console or the glove box, when the vehicle isin motion. The audio ...

Making Calls Press the voice button. When prompted, say “Call <name>” orsay “Dial”, then the desired number. To end the call or exit phone mode, press and hold the phonebutton. Receiving Calls During an incoming call, an audible tone sounds. Call informationappears in the display if it’s avail...

When you select: You can: Phone Book Access and call any contacts in yourpreviously downloaded phone book. Thesystem will place the entries in alphabeticalcategories summarized at the top of thescreen.To turn on contact picture settings (if yourdevice supports this feature), press Phone >Settings...

Text Messaging Note: Downloading and sending text messages using Bluetooth are phone-dependent features. Note: Certain features in text messaging are speed-dependent and cannot be completed when the vehicle is traveling at speeds over 5 mph(8 km/h). Note: SYNC does not download read text messages fr...

Pre-defined text message options I’m running a few minutes late. I’m ahead of schedule, so I’ll be there early. I’m outside. I’ll call you when I get there. OK Yes No Thanks Stuck in traffic. Call me later. LOL Receiving a Text Message Note: If you select View and your vehicle is traveling over 5 mp...

If you select: You can: 911 Assist Turn 911 Assist 威 on or off. Refer to 911 Assist 威 in the SYNC Services and Applications section. Phone Ringer Select what ring tone you would like to hearwhen you receive a call. Choose from possiblesystem ring tones, your currently pairedphone’s ring tone, a beep...

SYNC Services Voice Commands When a route has been downloaded (non-navigation systems),press the voice button on the steering wheel controls. Whenprompted, say any of the following commands: “SERVICES” “Cancel route” “Navigation voice off” “Navigation voice on” “Next turn” “Route status” “Route summ...

Press the information button and then select Travel Link, thenchoose from any of the following services: When you select: You can: Traffic On Route Identify traffic incidents on your route, nearbyyour vehicle’s current location or near any ofyour favorite places (if programmed). Traffic Nearby Fuel ...

Vehicle Health Report (If Equipped, U.S. Only) WARNING: Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. Vehicle Health Report supplements, but cannotreplace, normal maintenance and vehicle inspection. Vehicle He...

Making a Report To run a report by touchscreen, touch the information button >Apps > Vehicle Health Report. To run a report by voice command, press the voice button onthe steering wheel and, when prompted, say “Vehicle HealthReport”. Vehicle Health Report Privacy Notice When you run a Vehicle ...

Display You can make adjustments to the touchscreen display through thetouchscreen or by pressing the voice button on your steering wheelcontrols and when prompted, say “Display Settings”. To access and make adjustments using the touchscreen, press the Menuicon > Display. Brightness Mode • If you...

Vehicle Press the Menu icon > Vehicle to access settings for: • Active Park Assist • Ambient Lighting • Vehicle Health Report • Door Keypad Code • Rear View Camera • Enable Valet Mode Active Park Assist (If Equipped) When activated, your system displays directions for you regarding theactive park...

Enable Valet Mode Note: If you are locked out and need to reset the PIN, you can enter 3681 and the system unlocks. Valet mode allows you to lock the system so that none of yourinformation on the system can be accessed until it is unlocked with thecorrect PIN.1. Press the Menu icon > Vehicle >...

Route Preferences: • Choose to have the system display the shortest route, fastest route ormost ecological route. • Select to have the system avoid freeways. • Select to have the system avoid tollroads. • Select to have the system avoid ferries or car trains. • Select to have the system use HOV (hig...

USB Mobile Broadband: Instead of using wi-fi, your system can also use a USB mobile broadband connection to access the internet. (Youmust activate your mobile broadband device on your PC prior toconnecting it to the system.) This screen allows you to set up what isyour typical area for your USB mobi...

Software Licenses: View the licenses for any software and applications installed on your system. Driving Restrictions 911 Assist: Turn 911 Assist on and off. Refer to 911 Assist in the SYNC Applications and Services section. Voice Command List: View categorized lists of voice commands. To access Hel...

K. Driver settings: Depending on your vehicle and option package, you may have the following features: • Touch + or – to adjust the temperature. • Touch the heated seat icon to control the heated seat (if equipped).Refer to the Seats chapter. • Touch the cooled seat icon to control the cooled seat (...

Additional climate control voice commands “Fan decrease” “Temperature” * “Fan increase” “Temperature <15.5–29.5> degrees” “Floor on” “Temperature <60–85> degrees” “Max A/C off” “Temperature decrease” “Max A/C on” “Temperature high” “My temp” “Temperature increase” “Off” “Temperature low”...

This icon appears when your selection exists in multiplecategories within the system. When you are viewing additional information for hotels, cityseekr willalso tell you if the hotel has certain services and facilities using icons: Hotel services and facilities Restaurant 24 Hr Room Service Business...

Setting Your Navigation Preferences Select settings for the system to take into account when planning yourroute. Press the Menu icon > Settings > Navigation. When you select: You can: Map Preferences Turn breadcrumbs on and off. Have the system display your turn list top tobottom or bottom to ...

When you select: You can: Traffic Preferences Choose how you want the system to handletraffic problems along your route.Automatic: Have the system reroute you toavoid traffic incidents that develop andimpact the current route (no notification isprovided).Manual: Have the system always provide atraff...

Change the appearance of the mapdisplay by repeatedly pressing thearrow button in the upper leftcorner of the screen. It togglesbetween three different map modes;Heading up, North up, and 3D. Heading up (2D map) always shows the direction of forward travel to be upward on the screen. This view is av...

“DESTINATION” “Nearest POI” “Play nametags” “POI category” “Previous destination” “Street address” “Help” “NAVIGATION” “Destination” * “Zoom city” “Zoom country” “Zoom in minimum” “Zoom out maximum” “Zoom province” “Zoom state” “Zoom street” “Zoom to <distance>” “Help” * If you have said, “Des...

GENERAL INFORMATION SYNC 姞 End User License Agreement (EULA) • You have acquired a device (“DEVICE”) that includes software licensed by FORD MOTOR COMPANY from an affiliate of MicrosoftCorporation (“MS”). Those installed software products of MS origin, aswell as associated media, printed materials, ...

DEVICE downloads licenses for protected content, you agree thatMicrosoft may include a revocation list with the licenses. Contentowners may require you to upgrade the SOFTWARE on your DEVICEto access their content. If you decline an upgrade, you will not be ableto access content that requires the up...

laws and treaties. This EULA grants you no rights to use such content.All rights not specifically granted under this EULA are reserved by MS,Microsoft Corporation, FORD MOTOR COMPANY, third party softwareand service providers, their affiliates and suppliers. Use of any on-lineservices which may be a...

End user notice Microsoft 姞 Windows 姞 Mobile for Automotive Important Safety Information This system Ford SYNC™ contains software that is licensed toManufacturer FORD MOTOR COMPANY by an affiliate of MicrosoftCorporation pursuant to a license agreement. Any removal, reproduction,reverse engineering ...

electronically, you must discontinue your use of the TeleNav Software.8.4 TeleNav’s or your failure to require performance of any provision shallnot affect that party’s right to require performance at any time thereafter,nor shall a waiver of any breach or default of this Agreement constitute awaive...

If the Contracting Officer, federal government agency, or any federalofficial refuses to use the legend provided herein, the ContractingOfficer, federal government agency, or any federal official must notifyNAVTEQ prior to seeking additional or alternative rights in the Data. Wi-Fi hotspot data prov...

911 Assist™ ......................387, 461 A ABS (see Brakes) .....................200 Accessing and using yourUSB port ....................................441 Accessing call history/phonebook during active call .............377 Accessing your calendar ..........461 Accessing your media menufeatures...

Booster seats ...............................21 Brakes ........................................199 anti-lock ...................................200anti-lock brake system (ABS)warning light ...........................200brake warning light ................200fluid, checking and adding ....287fluid, r...