Ford 2013 C-MAX Hybrid v.2- Manuals

DATA RECORDING Service Data Recording Service data recorders in your vehicle are capable of collecting and storingdiagnostic information about your vehicle. This potentially includesinformation about the performance or status of various systems and modulesin the vehicle, such as engine, throttle, st...

CALIFORNIA PROPOSITION 65 WARNING: Some constituents of engine exhaust, certain vehicle components, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to theState of California to cause cancer and birth defects or otherreproductive harm. PERCH...

Collision Repairs We hope that you never experience a collision, but accidents do happen.Genuine Ford replacement collision parts meet our stringentrequirements for fit, finish, structural integrity, corrosion protection anddent resistance. During vehicle development, we validate that these partsdel...

MOBILE COMMUNICATIONS EQUIPMENT Using mobile communications equipment is becoming increasinglyimportant in the conduct of business and personal affairs. However, youmust not compromise your own or others’ safety when using suchequipment. Mobile communications can enhance personal safety andsecurity ...

GENERAL INFORMATION See the following sections for directions on how to properly use safetyrestraints for children. WARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be bought separately from your v...

Recommendations for Safety Restraints for Children Child size, height, weight, orage Recommendedrestraint type Smallchildren Children who have outgrown or nolonger properly fit in a child safetyseat (generally children who areless than 4 ft. 9 in. (1.45 m) tall,are greater than age four (4) andless ...

WARNING: Always restrain an unoccupied child seat or booster seat. These objects may become projectiles in a crash or sudden stop, which may increase the risk of serious injury. WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduc...

BOOSTER SEATS WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the riskof injury or death in a crash. Use a belt-positioning booster seat for children who have o...

Types of Booster Seats • Backless booster seats If your backless booster seat has a removable shield, remove the shield.If a vehicle seating position has a low seat back or no head restraint, abackless booster seat may place your child’s head (as measured at thetops of the ears) above the top of the...

Perform the following steps when installing the child seat withcombination lap and shoulder belts: Note: Although the child seat illustrated is a forward-facing child seat, the steps are the same for installing a rear-facing child seat. 1. Position the child safety seat in aseat with a combination l...

4. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) for that seating position untilyou hear a snap and feel the latchengage. Make sure the tongue islatched securely by pulling on it. 5. To put the retractor in theautomatic locking mode, grasp...

This is necessary to remove the remaining slack that will exist once theextra weight of the child is added to the child restraint. It also helps toachieve the proper snugness of the child seat to your vehicle.Sometimes, a slight lean toward the buckle will additionally help toremove remaining slack ...

Use of Inboard Lower Anchors from the Outboard SeatingPositions (Center Seating Use) WARNING: The standardized spacing for LATCH lower anchors is 11 inches. (28 centimeters) center to center. Do not use LATCH lower anchors for the center seating position unless the childseat manufacturer’s instructi...

3. Clip the tether strap to theanchor as shown. 4. Tighten the child safety seat tether strap according to themanufacturer’s instructions. If your child restraint system is equipped with a tether strap, and thechild restraint manufacturer recommends its use, Ford also recommendsits use. CHILD SAFETY...

PRINCIPLES OF OPERATION WARNING: Always drive and ride with your seat back upright and the lap belt snug and low across the hips. WARNING: To reduce the risk of injury, make sure children sit where they can be properly restrained. WARNING: Never let a passenger hold a child on his or her lap while t...

FASTENING THE SAFETY BELTS The front outboard and rear safety restraints in your vehicle arecombination lap and shoulder belts. 1. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) until you hear a snap and feelit latch. Make sure the tongue i...

Safety Belt Extension Assembly WARNING: Do not use extensions to change the fit of the shoulder belt across the torso. If the safety belt is too short when fully extended, you can obtain asafety belt extension assembly from an authorized dealer. Use only extensions manufactured by the same supplier ...

Deactivating and Activating the Belt-Minder® Feature (if equipped) WARNING: While the design allows you to deactivate your Belt-Minder®, this system is designed to improve your chances of being safely belted and surviving an accident. We recommend you leavethe Belt-Minder® system activated for yours...

CHILD RESTRAINT AND SAFETY BELT MAINTENANCE Inspect the vehicle safety belts and child safety seat systems periodicallyto make sure they work properly and are not damaged. Inspect thevehicle and child seat safety belts to make sure there are no nicks, tearsor cuts. Replace if necessary. All vehicle ...

PERSONAL SAFETY SYSTEM™ The Personal Safety System provides an improved overall level of frontalcrash protection to front seat occupants and is designed to help furtherreduce the risk of airbag-related injuries. The system is able to analyzedifferent occupant conditions and crash severity before act...

PRINCIPLES OF OPERATION WARNING: Airbags do not inflate slowly or gently, and the risk of injury from a deploying airbag is the greatest close to the trim covering the airbag module. WARNING: All occupants of your vehicle, including the driver, should always properly wear their safety belts, even wh...

The airbags are a supplemental restraint system and are designed towork with the safety belts to help protect the driver and right frontpassenger from certain upper body injuries. Airbags do not inflate slowly;there is a risk of injury from a deploying airbag. Note: You will hear a loud bang and see...

DRIVER AND PASSENGER AIRBAGS WARNING: Never place your arm or any objects over an airbag module. Placing your arm over a deploying airbag can result in serious arm fractures or other injuries. Objects placed on or over theairbag inflation area may cause those objects to be propelled by theairbag int...

Proper Driver and Front Passenger Seating Adjustment WARNING: The National Highway Traffic Safety Administration recommends a minimum distance of at least 10 inches (25 centimeters) between an occupant’s chest and the driver airbagmodule. To properly position yourself away from the airbag: • Move yo...

FRONT PASSENGER SENSING SYSTEM WARNING: Even with Advanced Restraints Systems, children 12 and under should be properly restrained in a rear seating position. WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the d...

KNEE AIRBAG The knee airbag is located under the instrument panel. The systemworks along with the driver’s front airbag to help reduce injury to thelegs. When the driver’s airbag activates in a collision, the knee airbagdeploys from under the instrument panel. As with front and side airbags,it is im...

The system consists of thefollowing: • a tag on the seat back indicatingthat side airbags are found onyour vehicle • side airbags located inside theseat back of the driver and frontpassenger seats. • Crash sensors and monitoring system with readinessindicator. See Crash Sensors and Airbag Indicator ...

Children 12 years old and under should always be properly restrained inthe rear seats. The Safety Canopy will not interfere with childrenrestrained using a properly installed child or booster seat because it isdesigned to inflate downward from the headliner above the doors alongthe side window openi...

If any of these things happen, even intermittently, have the supplementalrestraint system serviced at an authorized dealer immediately. Unlessserviced, the system may not function properly in the event of a crash. The safety belt pretensioners and the airbag supplemental restraintsystem are designed...

PRINCIPLE OF OPERATION The remote control allows you to: • remotely lock or unlock the vehicle doors • unlock the doors without actively using a key or remote control(intelligent access only) • remotely open the power liftgate (if equipped) • remotely start or stop the engine (if equipped) • arm and...

Intelligent Access (If Equipped) The system uses a radio frequency signal to communicate with yourvehicle and your vehicle to unlock when one of the following conditionsare met: • You touch the inside of the front exterior door handle. • You press the luggage compartment button. • You press a button...

Type 2 To release the key blade, slide therelease on the back of thetransmitter, then pull the blade out. Note: Your vehicle’s back-up keys were issued with a security tag thatprovides important vehicle key cutinformation. Keep the tag in a safeplace for future reference. Replacing the Battery Note:...

Intelligent Access Key (Type 2) 1. Remove the backup key from the transmitter. 2. Twist a thin coin under the tabhidden behind the backup key headto remove the battery cover. Do notuse the backup key to remove thecover or you could damage theintelligent access key. 3. Remove the old battery. 4. Inse...

Remote Start (C-MAX Energi Only) WARNING: To avoid exhaust fumes, do not use remote start if your vehicle is parked indoors or areas that are not well ventilated. Note: Do not use remote start if your vehicle is low on fuel. Your vehicle has remote start if the transmitter has this button. The remot...

Turning the Vehicle Off After Remote Starting Press the button once. The parking lamps will turn off. You may have to be closer to the vehicle than when starting due toground reflection and the added noise of the running vehicle. You can disable or enable the remote start system through theinformati...

PRINCIPLES OF OPERATION MyKey® allows you to program keys with restricted driving modes topromote good driving habits. All but one of the keys programmed to thevehicle can be activated with these restricted modes. Any keys that havenot been programmed are referred to as an administrator key or admin...

• Audio system maximum volume of 45%. A message in the audiosystem is displayed when attempting to exceed the limited volume. • AdvanceTrac. The system cannot be turned off when Always-on hasbeen set. CREATING A MYKEY Use the information display control to create a MyKey.1. Insert the key you want t...

CLEARING ALL MYKEYS Note: All programmed MyKeys can be cleared within the same key cycle in which a MyKey was created, otherwise an admin key is required toclear the keys. To clear all MyKeys (which removes all restrictions and returns them toadmin key status), use the information display controls t...

non-Ford-approved remote start system as a MyKey if the remote startfob is used by the MyKey driver. To program a non-Ford-approved remote start system as a MyKey, do thefollowing:1. Enter the vehicle and close all doors.2. Remote start the vehicle using a non-Ford approved remote start fob.3. Follo...

LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lockand unlock the vehicle. Power Door Locks The power door lock control is located on the driver and front passengerdoor panels. A. Unlock B. Lock Door Lock Indicator An LED on the instrument panel will light whe...

Remote Control The remote control can be used anytime the vehicle is not running. Unlocking the Doors (Two-Stage Unlock) Type 1 Type 2 Press the button to unlock the driver’s door. Press the button again within three seconds to unlock all doors. The turnsignals will flash. Press and hold both the lo...

Liftgate WARNING: Make sure all persons are clear of the liftgate area before using liftgate control. WARNING: Make sure the liftgate is closed to prevent exhaust fumes from being drawn into the vehicle. This will also prevent passengers and cargo from falling out. If you must drive with theliftgate...

Smart Unlocks for Integrated Keyhead Transmitter This feature helps to prevent you from locking yourself out of the vehicleif your key is still in the ignition. When you open one of the front doors and lock the vehicle with thepower door lock control, all the doors will lock then unlock if your key ...

The autounlock feature will unlock all the doors when: • autolock has locked the doors • you stop the vehicle and switch the ignition off or to accessory mode,and • the driver’s door is opened within 10 minutes. Note: The doors will not autounlock if you have electronically locked them before openin...

Power Liftgate (If Equipped) WARNING: Make sure all persons are clear of the power liftgate area before using the power liftgate control. WARNING: Keep keys out of reach of children. Do not allow children to play near an open or moving power liftgate. Note: Cycling the ignition while the liftgate is...

Programming a Spare Intelligent Access Key See your authorized dealer to have additional keys programmed to yourvehicle. ANTI-THEFT ALARM (IF EQUIPPED) The system will warn you of an unauthorized entry to your vehicle. Itwill be triggered if any door, the luggage compartment or the hood isopened wit...

ADJUSTING THE STEERING WHEEL WARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position in the Seats chapter. 1. Unlock the steering column. 2. Adjust the steering wheel to thedesired positi...

AUDIO CONTROL (IF EQUIPPED) Select the required source on the audio unit. The following functions can be operated with the control: A. Volume up B. Seek up or next C. Volume down D. Seek down or previous Seek, Next or Previous Press the seek button to: • tune the radio to the next or previous stored...

CRUISE CONTROL See the Cruise Control chapter. INFORMATION DISPLAY CONTROL Use the arrows on the left side ofthe steering wheel to navigate theinformation display. See the Information Displays chapter for more information. Multimedia Controls (If Equipped) Use the arrows on the right side of steerin...

WINDSHIELD WIPERS Note: Fully defrost the windshield before switching on the windshield wipers. Note: Make sure the windshield wipers are switched off before entering car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears. If that doesn’t resolve the issue, in...

WINDSHIELD WASHERS Note: Do not operate the washers when the washer reservoir is empty. This may cause the washer pump to overheat. The washer will spray for as longas the lever is pulled toward you.After you release the lever, thewipers will operate for a shorttime. A wipe will occur a few seconds ...

LIGHTING CONTROL A. Off B. Parking lamps, instrument panellamps, license plate lamps and taillamps C. Headlamps High Beams Push the lever forward to switchthe high beams on. Push the lever forward again or pullthe lever toward you to switch thehigh beams off. Headlamp Flasher Pull the lever toward y...

AUTOLAMPS (IF EQUIPPED) Note: It may be necessary to switch your headlamps on manually in severe weather conditions. The headlamps will switch on andoff automatically in low lightsituations or during inclementweather. The headlamps will remain on for aperiod of time after you switch theignition off....

Vehicles Without Front Fog Lamps A. Press repeatedly or press andhold to dim. B. Press repeatedly or press andhold to brighten. HEADLAMP EXIT DELAY After you switch the ignition off, you can switch the headlamps on bypulling the direction indicator lever toward you. You will hear a shorttone. The he...

FRONT FOG LAMPS Press the control to switch the foglamps on or off. You can switch the fog lamps onwhen the lighting control is in anyposition except off and the highbeams are not on. DIRECTION INDICATORS Push the lever up or down to usethe direction indicators. Note: Tap the lever up or down to mak...

POWER WINDOWS WARNING: Do not leave children unattended in the vehicle and do not let them play with the power windows. They may seriously injure themselves. WARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in the p...

Window Lock Press the control to lock or unlock the rearwindow controls. It will illuminate when therear window controls are locked. Bounce-Back (If Equipped) The window will stop automatically while closing. It will reverse somedistance if there is an obstacle in the way. Overriding the Bounce-Back...

6. Lift and hold the switch until the window is fully closed. 7. Open the window and then try to close it automatically. 8. Reset and repeat the procedure if the window does not closeautomatically. Accessory Delay (If Equipped) You can use the window switches for several minutes after the youswitch ...

Signal Indicator Mirrors The outer portion of the appropriate mirror housing will blink when theturn signal is activated. Integrated Blind Spot Mirrors WARNING: Objects in the blind spot mirror are closer than they appear. Blind spot mirrors have an integrated convex mirror built into the upperoutbo...

INTERIOR MIRROR WARNING: Do not adjust the mirror when your vehicle is moving. Note: Do not clean the housing or glass of any mirror with harsh abrasives, fuel or other petroleum or ammonia based cleaning products. You can adjust the interior mirror to your preference. Some mirrors alsohave a second...

SUN SHADE (IF EQUIPPED) WARNING: Do not let children play with the sun shade or leave them unattended in the vehicle. They may seriously hurt themselves. WARNING: When closing the sun shade, you should verify that it is free of obstructions and make sure that children and pets are not in the proximi...

Sun Shade Relearning WARNING: The bounce-back function is not active during this procedure. Make sure that there are no obstacles in the way of the moving sun shade. Note: The relearning process must be started within 30 seconds of switching the ignition on. In case the sun shade no longer opens or ...

GAUGES Cluster shown in standard measure – metric clusters similar. A. Left Information Display B. Speedometer C. Right Information Display: See the MyTouch chapter for more information. Left Information Display Odometer Located in the bottom of the information display Registers theaccumulated dista...

Common Displays Note: Battery gauge information can be individually selected on or off through Battery Display in the Options sub-menu. From any main displaya right arrow press on the steering wheel controls will take you to theOptions sub-menu. Note: For Energi vehicles there are two versions of th...

Fuel Gauge: The fuel gauge will indicate approximately how much fuel is left in the fuel tank. The fuel gauge may vary slightly when your vehicle ismoving or on a gradient. The arrow adjacent to the fuel pump symbolindicates on which side of the vehicle the fuel filler door is located. Brake Coach D...

WARNING LAMPS AND INDICATORS The following warning lamps and indicators will alert you to a vehiclecondition that may become serious. Some lamps will illuminate when youstart your vehicle to make sure they work. If any lamps remain on afterstarting your vehicle, refer to the respective system warnin...

Cruise Control (if equipped) It will illuminate when you switch this feature on. Direction Indicator Illuminates when the left or right turn signal or the hazardwarning flasher is turned on. If the indicators stay on or flashfaster, check for a burned out bulb. Door Ajar Displays when the ignition i...

Overdrive Cancel and Grade Assist (if equipped) It will illuminate when the overdrive function of thetransmission has been turned off and the grade assist functionhas been turned on. Parking Lamps It will illuminate when you switch the parking lamps orheadlamps on. Powertrain Malfunction/Reduced Pow...

GENERAL INFORMATION WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsibility is the safeoperation of the ...

Main menu From the main menu bar on the left side of the information display, youcan choose from the following categories: Display Mode Trip 1 & 2 Fuel Economy Information Settings Scroll up/down to highlight one of the categories, then press the rightarrow key or OK to enter into that category....

• Split Power— This gauge indicates the power being supplied by thevehicle’s two power sources: the high voltage battery and the gasolineengine. When the hybrid system is operating in electric vehicle mode(without the gasoline engine), EV is displayed. • Power + Threshold — When the transmission is ...

• Coolant Temp – Indicates engine coolant temperature. At normaloperating temperature, the level indicator will be white and will be inthe normal range (between H and C). If the engine coolanttemperature exceeds the normal range, the level indicator will changeto red to indicate that the engine is o...

Fuel Economy Use the arrow buttons to choose the desired energy display. Fuel Economy Menu level 2 Menu level 3 Menu level 4 Menu level 5 Fuel History: Instantaneous Fuel Economy + Fuel Economy History + Avg Fuel Economy Interval Time 1, 2, 6 min. Intervals — Coach Battery Display Regen Active Apply...

Information In this mode, you can view different vehicle system informationand perform a system check. Warnings XX Warnings Displays the number of warnings that needimmediate attention in red. You can only view thewarnings from the System Check menu. View themimmediately by pressing OK and then OK a...

Settings In this mode, you can configure different driver setting choices. Note: Some items are optional and may not appear. Note: *Some MyKey items will only appear if a MyKey is set. Settings Menu level 2 Menu level 3 Menu level 4 Menu level 5 Driver Assist Traction Ctrl On / Off — ECO Cruise On (...

Brake Coach Display: This appears after the vehicle has come to a stop.It coaches you to brake in a manner which maximizes the amount ofenergy returned through the regenerative braking system. The percentdisplayed is an indication of the regenerative braking efficiency with100% representing the maxi...

Maintenance Message Action / Description See Manual Indicates a powertrain orhigh-voltage charge system faulthas been detected. If the indicatorstays on or continues to come on,contact your authorized dealer assoon as possible. Service Tire Mobility Kit Displayed when the kit needsservice. See your ...

GENERAL AUDIO INFORMATION Radio Frequencies and Reception Factors AM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Canadian Radio and TelecommunicationsCommission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.9–107.7, 107.9 MHz Radio rec...

MP3 Track and Folder Structure Audio systems capable of recognizing and playing MP3 individual tracksand folder structures work as follows: • There are two different modes for MP3 disc playback: MP3 trackmode (system default) and MP3 folder mode. • MP3 track mode ignores any folder structure on the ...

N. Function Button 2: Select different functions of the audio system depending on which mode you are in (such as Radio mode or CD mode). O. Function Button 1: Select different functions of the audio system depending on which mode you are in (such as Radio mode or CD mode). P. MENU: Press this button...

SIRIUS Scan Select for a brief sampling of all availablechannels. Show ESN Select to view your satellite radio electronicserial number (ESN). You need this numberwhen communicating with SIRIUS® toactivate, modify or track your account. Channel Guide Select to view available satellite radiochannels. ...

AM/FM SINGLE CD PREMIUM AUDIO SYSTEM WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that you use extreme caution when using any device or feature that may takeyour focus off the road. Your primary responsibility is the safe oper...

D. TUNE + and TUNE - : • In radio mode, press these buttons to manually search through theradio frequency band. • In SIRIUS mode, press these buttons to find the next or previousavailable satellite radio station. E. Volume: Turn this control to adjust the volume. F. SOUND: Press this button to acces...

MEDIA HUB (IF EQUIPPED) The media hub is located in the center console and has the followingfeatures: A. A/V inputs B. SD card slot C. USB ports For more information, see the MyFord Touch chapter. SATELLITE RADIO INFORMATION (IF EQUIPPED) Satellite Radio Channels SIRIUS® broadcasts a variety of musi...

SIRIUS® Satellite Radio Service Note: SIRIUS® reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particularchannels, and its prices, at any time, with or without notice to you. FordMotor Company shall not be responsible for any such ...

AUTOMATIC CLIMATE CONTROL A. AUTO: Press to select automatic operation. The system automatically controls the temperature, amount and distribution of the airflow to reachand maintain your previously selected temperature. B. Fan speed: Controls the volume of air circulated in your vehicle. Press to s...

I. Footwell: Press to distribute air through the footwell air vents. J. Air conditioning: Press to switch the air conditioning on or off. Air conditioning cools your vehicle using outside air. To improve airconditioning when starting your vehicle, drive with the windows slightlyopen for two to three...

HEATED WINDOWS AND MIRRORS (IF EQUIPPED) Heated Rear Window Note: The vehicle must be running to use this feature. Press the control to clear the rear window of thin ice and fog. Press thecontrol again within 15 minutes to switch it off. It turns off automaticallyafter approximately 15 minutes, or w...

REMOTE START CLIMATE OPERATION (C-MAX ENERGI ONLY) The climate control system adjusts the cabin temperature during remotestart. You cannot adjust the system during remote start operation. Turn theignition on to return the system to its previous settings. You can nowmake adjustments. You will need to...

SITTING IN THE CORRECT POSITION WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system, resulting inserious injury or death in a crash. Always sit upright against your seatba...

The head restraints consist of: A. An energy absorbing head restraint B. Two steel stems C. Guide sleeve adjust and release button D. Guide sleeve unlock and remove button Adjusting the Head Restraint Raise: Pull up the head restraint. Lower: 1. Press and hold button C. 2. Push the head restraint do...

Remove: 1. Press and hold buttons C. 2. Pull the head restraint up. Install: Align the steel stems into the guide sleeves and push the headrestraint down until it locks. Fold: 1. Press and hold button D. 2. Pull it back up to reset. Tilting Head Restraints (If Equipped) The front head restraints may...

MANUAL SEATS WARNING: Do not adjust the driver’s seat or seat back while the vehicle is moving. Moving the seats backwards andforwards WARNING: Rock the seat backwards and forwards after releasing the lever to make sure that it is fully engaged. Adjusting the height of thedriver’s seat Seats 157 201...

Recline adjustment WARNING: Before returning the seat back to its original position, make sure that cargo or any objects are not trapped behind the seat back. After returning the seat back to its original position, pull on theseat back to ensure that it has fully latched. An unlatched seat maybecome...

REAR SEATS Folding the Seat Back (If Equipped) 1. Press the button on the outboardside of each rear outboard headrestto fold them. Make sure the rearcenter headrest is in the full downposition. 2. To fold the seat, pull the lever upon the outboard side of the seat. 3. To return the seat to the uprig...

HOMELINK® WIRELESS CONTROL SYSTEM (IF EQUIPPED) WARNING: Make sure that the garage door and security device are free from obstruction when you are programming. Do not program the system with the vehicle in the garage. WARNING: Do not use the system with any garage door opener that does not have the ...

Programming Note: Put a new battery in the hand-held transmitter. This will ensure quicker training and accurate transmission of the radio-frequency signal. 1. With your vehicle parked outside of the garage and your key in theignition, turn the key so that it is in the on position. 2. Hold your hand...

6. Return to your car. 7. Press and hold the functionbutton you want to program for2 seconds, then release. Repeat thisstep. Depending on your brand ofgarage door opener, you may needto repeat this sequence a third time. To program additional buttons, repeat Steps one through four. For questions or ...

Programming HomeLink® to the Genie Intellicode® garage dooropener motor Note: You may need a ladder to access the garage door opener motor. To program HomeLink® to thegarage door opener motor. 1. Press and hold the PROGRAMbutton on the garage door openermotor until both blue LED’s turn on. 2. Releas...

AUXILIARY POWER POINTS WARNING: Do not plug optional electrical accessories into the cigarette lighter socket (if equipped). Improper use of the lighter can cause damage not covered by your warranty, and can result in fireor serious injury. Note: If used when the engine is not running, the battery w...

CENTER CONSOLE WARNING: Use only soft cups in the cupholder. Hard objects can injure you in a collision. Your vehicle may be equipped with a variety of console features. Theseinclude: A. Cupholder B. Storage compartment with auxiliarypower point, auxiliary input jack, USBport and media hub C. Auxili...

The system does not function if: • the key frequencies are jammed. • the key battery has no charge. If you are unable to start your vehicle, do the following: 3-button remote 1. Hold the key at the backuplocation on the steering column. 2. With the key in this position, youcan use the start button t...

We recommend that you do the following for safe and correct operation: • Use a 16-gauge outdoor extension cord that is product certified byUnderwriter’s Laboratory or Canadian Standards Association. Thisextension cord must be able to be used outdoors, in coldtemperatures, and be clearly marked Suita...

HYBRID OPERATION Hybrid electric vehicles combine electric and gasoline propulsion to providebreakthrough performance and improved efficiency. It requires no specialfuels and never has to be plugged in. However, the C-MAX Energi will allowyou to operate in electric mode only if the high voltage batt...

The high voltage battery is located behind the rear seat or underneaththe load floor. The rear seats can be lowered to increase cargo space. If the vehicle is left inoperative for over 31 days, it may be necessary tojump start the vehicle. Refer to Jump starting the vehicle in the Roadside Emergenci...

Question Answer What is the fan noise I hear fromthe rear of my hybrid? The fan noise comes from a fanlocated inside the high voltagebattery. This fan turns on whenthe battery requires cooling air.The fan speed, and associatednoise level, will change accordingto the amount of cooling requiredto main...

Question Answer Can you charge the battery with aplug into an A/C outlet? There are no provisions forcharging the high voltage batteryfrom a power supply external tothe vehicle. (For C-MAX Energivehicles, the vehicle can beplugged into a 110 volt outlet withcharge cord provided.) Can I tow the hybri...

2. Press the accelerator pedal fully. A pop up message stating Press OK to Enable Engine will appear. Press OK on the left steering wheel button to activate as needed. The message will disappear if theaccelerator pedal is released. 3. Press the EV button. This will change the mode to EV Later andper...

SAFETY PRECAUTIONS WARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops. Otherwise, fue...

• Avoid getting fuel liquid in your eyes. If fuel is splashed in the eyes,remove contact lenses (if worn), flush with water for 15 minutes andseek medical attention. Failure to seek proper medical attention couldlead to permanent injury. • Fuels can also be harmful if absorbed through the skin. If f...

Use the following guidelines to avoid electrostatic charge build-up whenfilling an ungrounded fuel container: • Place approved fuel container on the ground. • DO NOT fill a fuel container while it is in the vehicle (including thecargo area). • Keep the fuel pump nozzle in contact with the fuel conta...

Manual override procedure WARNING: The fuel system may be under pressure. Insert the fuel nozzle slowly. If you hear a hissing sound near the fuel filler door, do not refuel until the sound stops. Otherwise, fuel may sprayout, which could cause serious personal injury. The manual override lever is l...

If the fuel fill inlet was not properly closed, a Check Fuel Fill Inletmessage may appear on the information display screen. At the nextopportunity, do the following: 1. Safely pull off the road. 2. Put the vehicle in P (Park) and turn the ignition off. 3. Open the fuel filler door and remove any vi...

Refilling with a Portable Fuel Container WARNING: Do not insert the nozzle of portable fuel containers or aftermarket funnels into the capless fuel system. This could damage the fuel system and its seal, and may cause fuel to run onto theground instead of filling the tank, which could result in seri...

HIGH-VOLTAGE BATTERY WARNING: This battery pack should only be serviced by an authorized electric vehicle technician. Improper handling can result in personal injury or death. Your vehicle consists of various high-voltage components and wiring. Allof the high-voltage power flows through specific wir...

Charging Equipment Note: Your vehicle comes equipped with a standard 120-volt convenience cord located in the floor compartment behind the driver’sseat. The 120–volt convenience cord allows you to charge the battery in yourown garage using a standard 120-volt household outlet. Using thestandard 120-...

Charge Port and Light Ring Note: Do not force the charge port door open or closed. Forcing the door open or closed will damage the charge port. The light ring located around the charge port indicates the charge statusof your battery while connected to a charge station or convenience cord.The charge ...

Charging Note: The vehicle must be in (P) Park to charge the high-voltagebattery. To charge your high-voltage battery: 1. Put the vehicle in (P) park andpower down the vehicle. 2. Press the indentation located onthe charge port door and the doorwill rotate open. 3. Plug the charging coupler into the...

Note: Do not pull the wall plug from the wall while the vehicle ischarging. Doing so may damage theoutlet and the cord. To disconnect the charging coupler: 1. Press the button on the chargingcoupler. 2. While holding the button, removethe charging coupler from thevehicle’s charge port receptacle. 3....

HIGH-VOLTAGE SERVICE DISCONNECT The high-voltage service disconnect shuts off power from thehigh-voltage battery. Disabling the High-Voltage Battery Note: There is a disconnect circuit in your vehicle. Disconnecting the circuit will automatically disable the high-voltage battery. To disable the high...

AUTOMATIC TRANSMISSION WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn the ignition to the off position and remove the key whenever you leave your vehicle WARNING: When parking, do not use the gearshift in place of the parking brake. Always set th...

Brake-Shift Interlock WARNING: Do not drive your vehicle until you verify that the brake lamps are working. WARNING: When doing this procedure, you will be taking the vehicle out of park which means the vehicle can roll freely. To avoid unwanted vehicle movement, always fully set the parking brakepr...

WARNING: If the engine is revved excessively, or if a malfunction is detected when the hill start assist feature is active, the hill start assist feature will be deactivated. Note: This feature will not operate if the parking brake is activated. Hill start assist keeps your vehicle stationary long e...

GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may beworn-out and should be inspected by an authorized dealer. If yourvehicle has continuous vibration or shudder in the steering wheel while...

Regenerative Braking System This feature is used to simulate the engine braking of an internalcombustion engine and assist the standard brake system while recoveringsome of the energy of motion and storing it in the battery to improvefuel economy. The standard brake system is designed to fully stop ...

PARKING BRAKE WARNING: Always set the parking brake fully and leave your vehicle with the transmission selector lever in position P. Note: Do not press the release button while pulling the lever up. To set the parking brake: 1. Press the foot brake pedal firmly. 2. Pull the parking brake lever up to...

PRINCIPLES OF OPERATION The traction control system helps avoid drive wheel spin and loss oftraction. If your vehicle begins to slide, the system applies the brakes to individualwheels and, when needed, reduces engine power at the same time. If thewheels spin when accelerating on slippery or loose s...

PRINCIPLES OF OPERATION WARNING: Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction or wheel and tire size may change the handlingcharacteristics of the vehicle and may adversely affect the performanceof the AdvanceTrac® system. In ...

A Vehicle without AdvanceTrac® with RSC® skidding off its intendedroute. B Vehicle with AdvanceTrac® with RSC® maintaining control on aslippery surface. USING ADVANCETRAC® WITH RSC® The system automatically activates when you start your engine. TheAdvanceTrac® with RSC® system cannot be completely t...

SENSING SYSTEM (IF EQUIPPED) WARNING: To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed)objects when moving in reverse on a flat surface at parking speeds.Traffic control sy...

Using the Front and Rear Sensing System Rear Sensing System The rear sensors are only active when the transmission is in R . As the vehicle moves closer to the obstacle, the rate of the audible warningincreases. When the obstacle is fewer than 12 inches (30 centimeters)away, the warning sounds conti...

Front Sensing System The front sensors are active when the gearshift is in any position other thanP (Park) or N (Neutral) and the vehicle speed is below 7 mph (12 km/h). A. Coverage area of up to 27 inches(70 centimeters) from the front ofthe vehicle and about 6–14 inches(15–35 centimeters) to the s...

Using Active Park Assist Press the button; the touch screendisplays a message and acorresponding graphic to indicateit’s searching for a parking space.Use the turn signal to indicatewhich side of the vehicle you wantthe system to search on. Note: If the turn signal is not on, the system automaticall...

Automatic Steering into Parking Space Note: If vehicle speed exceeds 7 mph (12 km/h), the system turns off and you need to take full control of the vehicle. Note: If a maneuver is interrupted before completion, the system turns off. The steering wheel position will not indicate the actual position o...

WARNING: Use caution when using the rear video camera and the liftgate is ajar. If the liftgate is ajar, the camera will be out of position and the video image may be incorrect. All guidelines (ifenabled) have been removed when the liftgate is ajar. WARNING: Use caution when turning camera features ...

Guidelines and the Centerline Note: Active guidelines and fixed guidelines are only available when the transmission is in R (Reverse). Note: The centerline is only available if Active or Fixed guidelines are on. A. Active guidelines B. Centerline C. Fixed guideline: Green zone D. Fixed guideline: Ye...

Visual Park Aid Alert Note: Visual park alert is only available when the transmission is in R (Reverse). Note: The reverse sensing system is not effective at speeds above 3 mph (5 km/h) and may not detect certain angular or moving objects. The visual park aid alert allows the driver to view the area...

PRINCIPLES OF OPERATION Cruise control lets you maintain a set speed without keeping your footon the accelerator pedal. USING CRUISE CONTROL WARNING: Do not use cruise control in heavy traffic or on roads that are winding, slippery or unpaved. Note: Vehicle speed may vary momentarily when driving up...

STEERING Electric Power Steering WARNING: The electric power steering system has diagnostic checks that continuously monitor the system to ensure proper operation. When a system error is detected a steering message willappear in the information display. WARNING: The electric power steering system ha...

Steering Tips If the steering wanders or pulls, check for: • an improperly inflated tire • uneven tire wear • loose or worn suspension components • loose or worn steering components • improper vehicle alignment A high crown in the road or high crosswinds may also make the steeringseem to wander/pull...

REAR UNDER FLOOR STORAGE The under floor storagecompartments are located in frontof the rear seats. Make sure the lidsare secure before driving. LUGGAGE COVERS (IF EQUIPPED) WARNING: Make sure that the posts are properly latched in mounting features. The cover may cause injury in a sudden stop or ac...

Remove the cargo shade by pressingthe release lever on each sideforward, then lifting the shade outof the mounting feature. You willsee a red mark when the lever isunlatched. LOAD LIMIT Vehicle loading This section will guide you in the proper loading of your vehicle to keepyour loaded vehicle weigh...

WARNING: Do not use replacement tires with lower load carrying capacities than the original tires because they may lower the vehicle’s GVWR and GAWR limitations. Replacement tires with ahigher limit than the original tires do not increase the GVWR andGAWR limitations. WARNING: Exceeding any vehicle ...

TOWING A TRAILER WARNING: Never tow a trailer with this vehicle. Your vehicle is not equipped to tow. No towing packages are available through an authorized dealer. WRECKER TOWING If you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assis...

Your vehicle can be towed from the front if proper wheel lift equipmentis used to raise the front wheels off the ground. The rear wheels can beleft on the ground when towed in this fashion. Your vehicle can also be towed from the rear using wheel lift equipment;however, it is required that the front...

BREAKING-IN You need to break in new tires for approximately 300 miles(480 kilometers). During this time, your vehicle may exhibit someunusual driving characteristics. The engine also needs to break in. Avoidhard accelerations and driving too fast for the first 1000 miles. Ifpossible, avoid carrying...

• Do not rest your foot on the brake pedal while driving. • Avoid carrying unnecessary weight (approximately 1 mile per gallon[0.4 kilometers per liter] is lost for every 400 pounds [180 kilograms]of weight carried). • Avoid adding particular accessories to your vehicle (e.g. bugdeflectors, rollbars...

FLOOR MATS WARNING: Always use floor mats that are designed to fit the footwell of your vehicle. Only use floor mats that leave the pedal area unobstructed. Only use floor mats that are firmly secured toretention posts so that they cannot slip out of position and interferewith the pedals or impair s...

WARNING (Continued) • Failure to properly follow floor mat installation or attachmentinstructions can potentially cause interference with pedal operationcausing loss of control of vehicle. • To install floor mats, position the floor mat so that the eyelet is overthe retention post and press down to ...

IMPORTANT ELECTRIC VEHICLE AND HYBRID-ELECTRICVEHICLE CONSIDERATIONS Guidance for Ford Motor Company Electric and Hybrid-ElectricVehicles Equipped With High-Voltage Batteries (VehicleOwner/Operator/General Public) In the event of damage or fire involving an electric vehicle (EV) orhybrid-electric ve...

• Do not touch exposed electrical components or the enginecompartment, as a shock hazard may exist. • Avoid contact with leaking fluids and gases, and remain out of the wayof oncoming traffic until emergency responders arrive. • When emergency responders arrive, tell them that the vehicle involvedis...

ROADSIDE ASSISTANCE Vehicles Sold in the U.S. : Getting Roadside Assistance To fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program. Thisprogram is separate from the New Vehicle Limited Warranty. The serviceis available: • 24-hours ...

Vehicles Sold in the U.S. : Using Roadside Assistance Complete the roadside assistance identification card and place it in yourwallet for quick reference. This card is found in the owner’s manualportfolio in the glove compartment. U.S. Ford vehicle customers who require Roadside Assistance, call1-80...

FUEL CUT-OFF SWITCH WARNING: Failure to inspect and if necessary repair fuel leaks after a collision may increase the risk of fire and serious injury. Ford Motor Company recommends that the fuel system be inspected byan authorized dealer after any collision. In the event of a moderate to severe coll...

To reactivate the vehicle after either event perform the following steps: 1. Press the START/STOP button to power the vehicle on. 2. Press the START/STOP button to power the vehicle off. 3. Press the START/STOP button to power the vehicle on again. Note: After completing this process the vehicle wil...

Connecting the Jumper Cables WARNING: Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery or a surge ofthe battery. Your vehicle has a 12 volt battery that has two prongs accessible...

Note: In the illustration, the vehicle on the bottom is used to designatethe assisting (boosting) battery. Note: Remove the red cap from the positive prong (A) on your vehiclebefore connecting the cables. 1. Connect the positive (+) jumpercable to the positive (+) prong (A)of the discharged battery....

Removing the Jumper Cables Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. Remove the jumper cables in the reverse order that they wereconnected. 1. Remove the jumper cable fromthe negative (-) prong on yourvehicle’s battery. 2. Remove the ...

GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorizeddealer. While any authorized dealer handling your vehicle line willprovide warranty service, we recommend you return to your sellingauthorized dealer who wants to ensure your continued satisfaction. Plea...

• Ford Genuine Accessories • Service specials and promotions. In Canada: Mailing address Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E4 Telephone 1-800-565-3673 (FORD) Online www.ford.ca Additional Assistance If you have questions or concerns,...

UTILIZING THE MEDIATION or ARBITRATION PROGRAM(CANADA ONLY) This pertains to vehicles delivered to authorized Canadian dealers. Inthose cases, where you continue to feel that the efforts by Ford ofCanada and the authorized dealer to resolve a factory-related vehicleservice concern have been unsatisf...

CHANGING A FUSE Fuses WARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. If electrical components in the vehicleare not working, a fuse may haveblown. Blown fuses are identifi...

FUSE SPECIFICATION CHART Pre-Fuse Box Your vehicle is equipped with a pre-fuse box located in the enginecompartment attached to the positive battery post. This box containsseveral high current fuses. If replacement of these high current fuses isrequired, see your authorized dealer. Power Distributio...

GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthinessand resale value. There is a large network of Ford authorized dealersthat are there to help you with their professional servicing expertise. Webelieve that their specially trained technicians are best qualifi...

OPENING AND CLOSING THE HOOD 1. Inside the vehicle, pull the hoodrelease handle located under theinstrument panel. 2. Go to the front of the vehicle. 3. Raise the hood slightly andrelease the secondary latch locatedunder the front center of the hood. 4. Raise the hood and support itwith the prop rod...

UNDER HOOD OVERVIEW 2.0L ATK iVCT Engine WARNING: The inverter system controller contains various high-voltage components that can cause serious injury or death. The inverter system controller is not serviceable and should never betouched, probed, or tampered with. Note: Do not attempt to service an...

ENGINE OIL DIPSTICK A. MIN B. MAX ENGINE OIL CHECK Note: Check the level before starting the engine. Note: Make sure that the level is between the MIN and MAX marks. 1. Make sure that your vehicle is on level ground. 2. Turn the engine off and wait 10 minutes for the oil to drain into theoil pan. 3....

COOLANT Engine Coolant and Inverter System Controller Coolant Your vehicle is equipped with two separate cooling systems. One is forcooling the engine and one is for cooling the inverter system controllerthat is specific to the hybrid operating system. The two systems operatesimilarly, with the inve...

The coolant concentration should be maintained at 50%. Note: For best results, coolant concentration should be tested with a refractometer such as Rotunda tool ROB75240 available from yourdealer. Ford does not recommend the use of hydrometers or coolant teststrips for measuring coolant concentration...

5. Close the engine coolant reservoir cap. 6. Clean the Easy Fuel funnel. 7. Store the Easy Fuel funnel in the storage compartment. Whenever you add engine coolant, check the coolant level in the enginecoolant reservoir the next few times you drive the vehicle. If necessary,add enough prediluted eng...

If you drive in extremely hot climates: • It may be necessary to have a Ford authorized dealer decrease thecoolant concentration to 40%. • A coolant concentration of 40% will provide improved overheatprotection. Engine coolant concentrations below 40% will decrease thecorrosion/freeze protection cha...

When Fail-Safe Mode is Activated WARNING: Fail-safe mode is for use during emergencies only. Operate the vehicle in fail-safe mode only as long as necessary to bring the vehicle to rest in a safe location and seek immediate repairs.When in fail-safe mode, the vehicle will have limited power, will no...

BRAKE FLUID CHECK Fluid levels between the MIN and MAX lines are within the normaloperating range; there is no need to add fluid. If the fluid levels areoutside of the normal operating range, the performance of the systemcould be compromised; seek service from your authorized dealerimmediately. POWE...

7. Allow the engine to idle for at least one minute. 8. If the engine turns off, step on the accelerator to start the engine. 9. While the engine is running, step on the brake pedal and shift thetransmission to N (Neutral). 10. Allow the engine to run for at least one minute by pressing on theaccele...

Setting the Front Wipers in the Service Position 1. Make sure that the outside of thewindshield is free from snow andice. 2. Switch on the ignition. 3. Switch off the ignition, and movethe wiper lever to position A withinthree seconds. Hold the lever inposition A. 4. Release the lever when thewipers...

Changing the Rear Window Wiper Blade 1. Lift the wiper arm. 2. Slightly rotate the wiper bladefrom the wiper arm. 3. Disengage the wiper blade fromthe wiper arm. 4. Remove the wiper blade. Note: Make sure that the wiper blade locks into place. 5. Install in the reverse order. Replace wiper blades at...

Identifying Air Filter Element Components A. Air cleaner assembly B. Air cleaner cover C. Air cleaner outlet tube D. Positive crankcase ventilation (PCV) tube E. Air cleaner intake tube Removing the Engine Air Filter Element 1. Loosen the hose clamps for aircleaner outlet tube (C). Disconnectthe tub...

Installing the Engine Air Filter Element Note: Clean the inside of the air filter assembly before installing a new air filter. 1. Install the new engine air filter into the engine air cleaner assembly. 2. Install the air cleaner cover (B)and tighten the 5 bolts. 3. Position the air cleaner assembly(...

3. Turn on the low beam headlamps to illuminate the wall or screen andopen the hood. To see a clearer light pattern for adjusting, you may want to block thelight from one headlamp while adjusting the other. On the wall or screen you willobserve a flat zone of high intensitylight located at the top o...

REMOVING A HEADLAMP 1. Make sure the lighting control isin the off position and open thehood. 2. Remove the two screws from theheadlamp assembly. 3. Carefully pull the headlampassembly as far as possible towardsthe center of the vehicle todisengage it from the lower fixingpoint. 4. Carefully lift th...

Replacing the Low BeamHeadlamp Bulb: 1. Remove the headlamp assembly. 2. Remove the cover. 3. Turn the bulb holdercounterclockwise and remove it. 4. Remove the bulb from theheadlamp assembly. Replacing the Side Lamp Bulb: 1. Remove the headlamp assembly. 2. Remove the service cap. 3. Remove the bulb...

4. Remove the wing nut. 5. Gently pull the lamp assemblyaway from the vehicle 6. Disconnect the electricalconnector. 7. Remove the bulb holder. 8. Gently press the bulb into thebulb holder, turn the bulbcounterclockwise, and remove thebulb. A. Reverse lamp B. Tail lamp Install the new bulb in revers...

Replacing the Center High Mounted Brake Lamp Bulbs: 1. Open the liftgate. 2. Detach the clips above theinboard side of the rear window. 3. Insert a suitable tool into theholes. 4. Carefully pull the lamp towardsthe front of the vehicle in order torelease the spring clips. 5. Gently pull the lamp ass...

REPAIRING MINOR PAINT DAMAGE Your authorized dealer has touch-up paint to match your vehicle’s color.Take your color code (printed on a sticker in the driver’s door jamb) toyour authorized dealer to make sure you get the correct color. • Remove particles, such as bird droppings, tree sap, insect dep...

4. Remove the soaked cloth, and if it is not soiled badly, use this cloth toclean the area by using a rubbing motion for 60 seconds. 5. Following this, wipe area dry with a clean, white, cotton cloth. CLEANING LEATHER SEATS (IF EQUIPPED) • Remove dust and loose dirt with a vacuum cleaner. • Clean sp...

VEHICLE STORAGE If you plan on storing your vehicle for an extended period of time(30 days or more), refer to the following maintenance recommendationsto ensure your vehicle stays in good operating condition. All motor vehicles and their components were engineered and tested forreliable, regular dri...

4. If you are storing your vehicle for more than 30 days withoutrecharging the battery, disconnect the negative battery cable from thelow voltage battery. 5. If you disconnected the negative battery cable, apply painter’s tape tothe liftgate latch in order to prevent the liftgate from closing fully....

TIRE CARE Information About Uniform Tire Quality Grading Tire Quality Grades apply to newpneumatic passenger car tires. TheQuality grades can be found whereapplicable on the tire sidewall betweentread shoulder and maximum sectionwidth. For example: • Treadwear 200 Traction AA Temperature A These Tir...

INFORMATION CONTAINED ON THE TIRE SIDEWALL Both U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the sidewall of all tires. Thisinformation identifies and describes the fundamental characteristics ofthe tire and also provides a U.S. DOT Tire Identifi...

E. 15: Indicates the wheel or rim diameter in inches. If you change your wheel size, you will have to purchase new tires to match the new wheeldiameter. F. 95: Indicates the tire’s load index. It is an index that relates to how much weight a tire can carry. You may find this information in yourowner...

Information on T Type Tires T type tires have some additionalinformation beyond those of P typetires; these differences aredescribed below. T145/80D16 is an example of a tiresize. Note: The temporary tire size for your vehicle may be different fromthis example. Tire Quality Gradesdo not apply to thi...

INFLATING YOUR TIRES Safe operation of your vehicle requires that your tires are properlyinflated. Remember that a tire can lose up to half of its air pressurewithout appearing flat. Every day before you drive, check your tires. If one looks lower than theothers, use a tire gauge to check pressure o...

Maximum Inflation Pressure is the tire manufacturer’s maximum permissible pressure or the pressure at which the maximum load can becarried by the tire. This pressure is normally higher than themanufacturer’s recommended cold inflation pressure which can be foundon the Safety Compliance Certification...

Damage Periodically inspect the tire treads and sidewalls for damage (such asbulges in the tread or sidewalls, cracks in the tread groove andseparation in the tread or sidewall). If damage is observed or suspected,have the tire inspected by a tire professional. Tires can be damagedduring off-road us...

Tire Replacement Requirements WARNING: Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus LT-metric or all-season versus all-terrain) as those originallyprovided by Ford. The recommended tire and wheel size may be found oneither t...

Important: Remember to replace the wheel valve stems when the road tires are replaced on your vehicle. The two front tires or two rear tires should generally be replaced as apair. The tire pressure sensors mounted in the wheels (originally installed onyour vehicle) are not designed to be used in aft...

Tire and Wheel Alignment A bad jolt from hitting a curb or pothole can cause the front end of yourvehicle to become misaligned or cause damage to your tires. If yourvehicle seems to pull to one side when you are driving, the wheels maybe out of alignment. Have an authorized dealer check the wheelali...

USING SNOW CHAINS WARNING: Snow tires must be the same size, load index, speed rating as those originally provided by Ford. Use of any tire or wheel not recommended by Ford can affect the safety and performanceof your vehicle, which could result in an increased risk of loss of vehiclecontrol, vehicl...

The tire pressure monitoring system is not a substitute for proper tiremaintenance, and it is the driver’s responsibility to maintain correct tirepressure, even if under-inflation has not reached the level to triggerillumination of the system low tire pressure telltale. Your vehicle has also been eq...

Understanding Your Tire Pressure Monitoring System The tire pressure monitoring system measures pressure in your four roadtires and sends the tire pressure readings to your vehicle. The low tirepressure warning light will turn on if the tire pressure is significantly low.Once the light is illuminate...

TEMPORARY MOBILITY KIT Note: The temporary mobility kit sealant compound in the canister is to be used for one tire only. See your Ford authorized dealer for additionalreplacement sealant canisters. The kit is located under the frontrow passenger seat. Loosen the Velcro® straps to accessthe kit. The...

A. Air compressor (inside) B. Diverter knob C. On/Off button D. Air pressure gauge E. Sealant bottle/canister F. Sealant filling clear tube G. Sealant tube – tire valveconnector H. Yellow cap tool I. Air compressor hose J. Air hose – tire valve connector K. Accessory power plug L. Casing/housing Gen...

Tips for Use of the Temporary Mobility Kit Read the following list of tips to ensure safe operation of the temporarymobility kit: • Before operating the temporary mobility kit, make sure your vehicle issafely off the road and away from moving traffic. Turn on the hazardlights. • Always set the parki...

9. When the recommended tire pressure is reached, turn off the kit bypressing the on and off button; disconnect the kit from the tire valve andthe power point. Re-install the valve cap on the tire valve, place the tubecap on the metal connector, and return the kit to the stowage area. 10. Note: Imme...

4. Adjust the tire to therecommended inflation pressurefrom the Tire Label located on thedriver’s door or door jamb area. Note: The tire pressure has to be checked with the compressor in theOFF position to get the correct tirepressure reading. 5. Turn the compressor off by pressing the on/off button...

Removal of the sealant canister from the temporary mobility kit: 1. Unwrap the clear tube from thecompressor housing. 2. Locate the yellow cap at the endof the clear tube. 3. Using the yellow cap tool, pressthe tab located on the temporarymobility kit compressor housingwhile pulling up on the sealan...

Be sure to check the sealantcompound’s use-by date regularly.The use-by date is on the lowerright hand corner of the labellocated on the sealant canister (bottle). The sealant canister should be replaced after four years. TECHNICAL SPECIFICATIONS Wheel Lug Nut Torque Specifications WARNING: When a w...

MOTORCRAFT® PART NUMBERS Component 2.0L ATK iVCT engine Air filter element 1 FA-1911 Oil filter 2 FL-910- S Low-Voltage Battery BXT-96R-500 / BXT-96R-590 Spark plugs 3 CYFS12YPC5 / SP531 Cabin air filter FP70 Windshield wiper blade WW29 (driver side) WW25 (passenger side) 1 Failure to use the correc...

VEHICLE IDENTIFICATION NUMBER The vehicle identification number islocated on the driver sideinstrument panel. Please note that in the graphic,XXXX is representative of yourvehicle identification number. The Vehicle Identification Number (VIN) contains the followinginformation: A. World manufacturer ...

ACCESSORIES For a complete listing of the accessories that are available for yourvehicle, please contact your dealer or visit our online store at: Accessories.Ford.com (U.S. only). Ford Custom Accessories are available for your vehicle through yourlocal Ford or Ford of Canada dealer. Ford Motor Comp...

FORD ESP EXTENDED SERVICE PLANS (U.S. ONLY) More than 32 million Ford and Lincoln owners have discovered thepowerful protection of Ford ESP. It is the only extended service planbacked by Ford Motor Company, and provides “peace of mind”protection beyond the New Vehicle Limited Warranty coverage. Up t...

FORD ESP EXTENDED SERVICE PLANS (CANADA ONLY) You can get more protection for your vehicle by purchasing a FordExtended Service Plan (ESP). Ford ESP is the only service contractbacked by Ford Motor Company of Canada, Limited. Depending on theplan you purchase, Ford ESP provides benefits such as: • r...

GENERAL MAINTENANCE INFORMATION Why Maintain Your Vehicle? Carefully following the maintenance schedule helps protect against majorrepair expenses resulting from neglect or inadequate maintenance andmay also help to increase the value of your vehicle when you sell ortrade it. Keep all receipts for c...

Protecting Your Investment Maintenance is an investment that pays dividends in the form ofimproved reliability, durability and resale value. To maintain the properperformance of your vehicle and its emission control systems, it isimperative that scheduled maintenance be completed at the designatedin...

NORMAL SCHEDULED MAINTENANCE AND LOG C-MAX Full Hybrid Normal Scheduled Maintenance * At every oil changeinterval as indicated bythe informationdisplay. Can be up to10000 miles(16000 km) or12 months. Change engine oil and filter. ** Rotate tires, inspect tire wear and measuretread depth. Perform mul...

Additional Maintenance Items * Every 20000 miles(32000 km) Replace cabin air filter. Every 30000 miles(48000 km) Replace engine air filter. At 100000 miles(160000 km) Change engine coolant and motor/electronicscoolant. ** Every 100000 miles(160000 km) Replace spark plugs. Every 150000 miles(240000 k...

C-MAX Energi Normal Scheduled Maintenance * At every oil changeinterval as indicated bythe informationdisplay. Change engine oil and filter. ** Inspect automatic transmission fluid level.Consult dealer for requirements. Inspect brake pads, shoes, rotors, drums,brake linings, hoses and parking brake....

Maintenance Schedule Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ...

Operating in Dusty or Sandy Conditions such as Unpaved or Dusty Roads Inspect frequently,service as required Replace cabin air filter. Replace engine air filter. Every 5000 miles(8000 km) Inspect the wheels and related components forabnormal noise, wear, looseness or drag. Rotate tires, inspect tire...

Special Operating Condition Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D A...

EXCEPTIONS California fuel filter replacement: If the vehicle is registered in California, the California Air Resources Board has determined that thefailure to perform this maintenance item will not nullify the emissionwarranty or limit recall liability prior to the completion of the vehicle’suseful...

Engine Coolant and Motor/Electronics Coolant Change Log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C...

GENERAL INFORMATION Ensure that you review your device’s user guide before using it with SYNC. Support The SYNC support team is available to help you with any questions youcannot answer on your own. Monday-Saturday, 8:30am-8:00pm EST In the United States, call: 1–888–270–1055 In Canada, call: 1–800–...

• Do not leave playing devices in your vehicle during extreme conditionsas it could cause them damage. See your device’s user guide forfurther information. • Do not attempt to service or repair the system. See your authorizeddealer. For your safety, some SYNC functions are speed-dependent. Their use...

Phone Options during an Active Call During an active call, you have additional menu features which becomeavailable such as putting a call on hold, joining calls, etc. Use the arrowbuttons to scroll through the menu options. To access:1. Press MENU during an active call.2. When Active Call Menu is se...

When you select: You can: Call History Access your call history log.1. Press OK to select, then scroll through your callhistory options (incoming, outgoing or missed).2. Press OK when the desired selection appears inthe display.3. Press the phone button to call the selection. Return Exit the current...

When you select: You can: Phonebook 1,2 Allows you to access your downloaded phonebook.1. Press OK to confirm and enter. If yourphonebook has fewer than 255 listings, theyappear alphabetically in flat file mode. If there aremore, they are organized into alphabeticalcategories.2. Scroll until the des...

Text Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages.The system can also read incoming text messages to you so that you donot have to take your eyes off the road. Receiving a Text Message Note: This is a phone-dependent feature. ...

Delete All Messages? allows you to delete current text messages from SYNC (not your phone). To delete the messages, press OK to select. Thedisplay indicates when all your text messages have been deleted andSYNC returns you to the text message menu. Note: SYNC does not automatically download all of y...

When you select: You can: Modify Phonebook Modify the contents of your phone book (i.e.,add, delete, download). Press OK to selectand scroll between: Add Contacts: Press OK to add more contactsfrom your phone book. Push the desiredcontact(s) on your phone. See your phone’suser guide on how to push c...

System Settings System Settings provide access to your Bluetooth Devices andAdvanced menu features. Use the arrow buttons to scroll through themenu options. The Bluetooth Devices menu allows you to add, connect, delete and set aphone as primary as well as turn your Bluetooth feature on and off. The ...

If you select: You can: Set Bluetooth On/Off Turn the Bluetooth feature on and off.Press OK and scroll to toggle between On andOff. When the desired selection is chosen,press OK. Note: Turning Bluetooth off disconnects all Bluetooth devices and deactivates allBluetooth features. Delete Device Delete...

SYNC APPLICATIONS AND SERVICES (IF EQUIPPED) Note: In order for the following features to work, your cellular phone must be compatible with SYNC. To check your phone’s compatibility, visitwww.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca. • SYNC Services (if equipped, U.S. only): Provides ...

Vehicle Health Report WARNING: Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. Vehicle Health Report supplements, but cannotreplace normal maintenance and vehicle inspection. Vehicle HealthReport only monitors c...

To run a report using the phone button:1. Press the phone button to enter Phone Menu.2. Scroll until Vehicle Health is selected and press OK.3. Scroll to select from the following options: Vehicle Health Report Options User Preferences:Press OK to selectand enter the menu.Scroll to select from: Auto...

If you miss a turn, SYNC automatically asks if you want the routeupdated. Just say, “Yes” when prompted and a new route will bedelivered to your vehicle. Disconnecting from SYNC Services 1. Press and hold the phone button on the steering wheel.2. Say “Good-bye” from the SYNC Services main menu. SYNC...

SYNC AppLink™ Note: Your smartphone must be paired and connected to SYNC to access AppLink. Note: iPhone® users need to connect the phone to the USB port in order to start the application. It is recommended to lock your iPhone®after starting an application. Note: The AppLink feature is not available...

To Access Using Voice Commands 1. Press the voice icon.2. When prompted, say “Mobile Apps”.3. Say the name of the application after the tone.4. The app should start. While an app is running through SYNC, you can press the voice button and speak commands specific to the app, suchas “Play Station Quic...

Voice Command Guide “Search/Play Genre” The system searches all the data from yourindexed music and, if available, begins to playthe chosen type of music. You can only playgenres of music which are present in theGENRE metadata tags that you have on yourdigital media player. “Similar Music” The syste...

Media Menu Features The media menu allows you to select your media source, how to playyour music (by artist, genre, shuffle, repeat, etc.), and also to add,connect or delete devices.1. Press AUX and then MENU to enter the Media Menu.2. Scroll to cycle through: When you select: You can: Play Menu Pla...

When you select: You can: Media Settings Choose to shuffle or repeat your music and selectyour Autoplay settings. Once these selections areturned on, they remain on until turned off. PressSEEK to play the previous or next track. Note: Some digital media players require both USB and line in ports to ...

When you select: You can: Similar Music Play music similar to what is currently playingfrom the USB port. The system uses themetadata information of each song to compile aplaylist for you.Press OK to select. The system creates a newlist of similar songs and begins playing. Themetadata tags must be p...

4. Press OK and then scroll to select from: When you select: You can: Add BluetoothDevice * Allows you to pair additional devices to thesystem.1. Press OK to select and press OK againwhen Find SYNC appears in the display.2. Follow the directions in your phone’s userguide to put your phone into disco...

Advanced Menu Options This menu allows you to access settings such as prompts, language,performing a master reset as well as returning to factory defaults.1. Press AUX and then MENU to access the Media Menu.2. Scroll until System Settings appears and select OK.3. Scroll until Advanced appears.4. Pre...

When you select: You can: Master Reset Completely erase all information stored onSYNC (all phonebook, call history, textmessages and all paired devices) and returnto the factory default settings. Application Download new software applications (ifavailable) and then load the desiredapplications throu...

Vehicle Health Report/Services (Traffic, Directions and Information) Issues Issue Possible Cause(s) Possible Solution(s) I received a textthat the VehicleHealth Report isnot activated. • Your account may not beactivated on thewebsite, OR • You may have the wrong VIN(vehicleidentificationnumber) list...

INTRODUCTION WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsibility is the safeoperation of the vehicle...

Cleaning the Touchscreen Display Use a clean, soft cloth such as one used for cleaning glasses. If dirt orfingerprints are still visible, apply a small amount of alcohol to the cloth.Do not pour or spray alcohol onto the display. Do not use detergent orany type of solvent to clean the display. Suppo...

ACCESSING AND ADJUSTING MODES THROUGH YOUR RIGHTVEHICLE INFORMATION DISPLAY (IF EQUIPPED) The display is located on the right side of your instrument cluster. Youcan use your steering wheel controls to view and make minoradjustments to active modes without taking your hands off the wheel.For example...

Helpful Hints • Make sure the interior of your vehicle is as quiet as possible. Windnoise from open windows and road vibrations may prevent the systemfrom correctly recognizing spoken commands. • After pressing the voice icon, wait until after the tone sounds andListening appears before saying a com...

When HD Radio broadcasts are active, you can access the followingfunctions: When you select: You can: Scan Hear a brief sampling of all available stations.This feature still works when HD Radioreception is on, although it does not scan forHD2-HD7 channels. You may see the HD logoappear if the statio...

HD Radio Reception and Station Troubleshooting Potential Reception Issues Reception area If you are listening to a multicast station andyou are on the fringe of the reception area,the station may mute due to weak signalstrength.If you are listening to HD1, the systemswitches back to the analog broad...

Radio Voice Commands If you are listening to the radio, press the voice button on thesteering wheel control. When prompted, say any of thecommands in the following chart. If you are not listening to the radio, press the voice button and, after thetone, say “Radio”, then any of the commands in the fo...

Satellite Radio Voice Commands If you are listening to SIRIUS satellite radio, press the voicebutton on the steering wheel control. When prompted, say anyof the commands in the following chart. If you are not listening to SIRIUS satellite radio, press the voice buttonand, after the tone, say “Sirius...

“TUNE” “SAT 3” “SAT 3 preset <#>” “Help” SIRIUS Satellite Radio Information Note: SIRIUS reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particularchannels, and its prices, at any time, with or without notice to you. FordMot...

Potential Satellite Radio Reception Issues Station overload When you pass a ground-basedbroadcast-repeating tower, a stronger signalmay overtake a weaker one and the audiosystem may mute. Satellite radio signalinterference Your display may show ACQUIRING . . . toindicate the interference and the aud...

SIRIUS Troubleshooting Tips Radio Display Condition Possible Action Call SIRIUS1–888–539–7474. Your satellite service isno longer available. Contact SIRIUS at1-888-539-7474 toresolve subscriptionissues. No Channels Available. All the channels in theselected channels areeither skipped orlocked. Use t...

CD Voice Commands If you are listening to a CD, press the voice button on thesteering wheel control. When prompted, say any of thecommands in the following chart. If you are not listening to a CD, press the voice button and, after thetone, say “CD”, then any of the commands in the following chart. “...

USB Port The ports are located either in the centerconsole or behind a small access door in theinstrument panel. To access and play musicfrom your device, press the lower left cornerof the touchscreen. This feature allows you to plug in media playing devices, memory sticks,flash drives or thumb driv...

When you select: You can: Options Sound Settings allows you to adjust Bass, Midrange, Treble, Balance and Fade, DSP(Digital Signal Processing), Occupancy Modeand Speed Compensated Volume. (Your vehiclemay not have all these settings.) Media Player Settings allows you to select more settings, which i...

Supported Media Players, Formats and Metadata Information SYNC is capable of hosting nearly any digital media player, includingiPod®, Zune™, plays from device players, and most USB drives.Supported audio formats include MP3, WMA, WAV and AAC. It is also able to organize your indexed media from your ...

In order to playback video from your iPod® or iPhone® (if compatible),you must have a special combination USB/RCA composite video cable(which you can buy from Apple®). When the cable is connected to youriPod® or iPhone®, plug the other end into both the RCA jacks and theUSB port. Troubleshooting • D...

Text Messaging Note: Downloading and sending text messages using Bluetooth are phone-dependent features. Note: Certain features in text messaging are speed-dependent and not available when your vehicle is traveling at speeds over 3 mph (5 km/h). Note: SYNC does not download read text messages from y...

Pre-defined Text Message Options I’m ahead of schedule, so I’ll be there early. I’m outside. I’ll call you when I get there. OK Yes No Thanks Stuck in traffic. Call me later. LOL Receiving a Text Message Note: If you select View and your vehicle is traveling over 5 mph (8 km/h), the system offers to...

If you select: You can: 911 Assist Turn on or turn off the 911 Assist™ feature.See 911 Assist® in the SYNC Services and Applications section. Phone Ringer Select what ring tone you would like to hearwhen you receive a call. Choose from possiblesystem ring tones, your currently pairedphone’s ring ton...

Connecting to SYNC Services Using Voice Commands 1. Press the voice button.2. When prompted, say “Services”. This initiates an outgoing call to SYNC Services using your paired and connected Bluetooth-enabledcellular phone. 3. Once you connect to the service, follow the voice prompts to request the d...

SYNC Services Quick Tips Portable Your subscription is associated with yourBluetooth-enabled cellular phone number, notyour VIN (Vehicle Identification Number). Youcan pair and connect your phone to anyvehicle equipped with Traffic, Directions andInformation and continue enjoying yourpersonalized se...

SIRIUS Travel Link Voice Commands Note: In order to use SIRIUS Travel Link, your vehicle must be equipped with navigation and your navigation SD card must be in the SD card slot. Press the voice button and when prompted, say any of thefollowing: Travel Link Voice Commands “5–day weather forecast” “S...

Register for Vehicle Health Report and set your report preferences atwww.SYNCMyRide.com. After registering, you can request a VehicleHealth Report (inside your vehicle). Return to your account atwww.SYNCMyRide.com to view your report. You can also choose forSYNC to remind you automatically to run re...

Uploading Photos for Your Home Screen Wallpaper Note: You cannot load photos directly from your camera. You must access the photos either from your USB mass storage device or from anSD card. Note: Photographs with extremely large dimensions (i.e., 2048 x 1536) may not be compatible and appear as a b...

Vehicle Health Report Turn Automatic Reminders on and off and set the mileage interval atwhich you would like to receive the reports. Press the ? for moreinformation on these selections. When done making your selections, press Run Vehicle Health ReportNow if you want your report. Rear View Camera Th...

Navigation Press the Settings icon > Settings > Navigation, then select from the following: Navigation Map Preferences Turn breadcrumbs on and off. Have the system display your turn list top tobottom or bottom to top. Turn the Parking POI notification on and off. Route Preferences Have the sys...

Wireless & Internet USB MobileBroadband Instead of using Wi-Fi, your system can alsouse a USB mobile broadband connection toaccess the internet. (You must turn on yourmobile broadband device on your personalcomputer before connecting it to the system.)This screen allows you to set up what is you...

CLIMATE Press the lower right corner on the touchscreen to access yourclimate control features. Depending on your vehicle line andoption package, your climate screen may look different from the screen shown here. A. Power: Touch to switch the system off and on. Outside air cannot enter your vehicle ...

Additional Climate Control Voice Commands “Minimum fan” “Windshield panel floor on” “Off” “Windshield panel on” “On” “Help” * If you have said “Temperature”, you can say any of the commands in the following “Temperature” chart. “TEMPERATURE” “<15.5–29.5> degrees” “<60–85> degrees” “High”...

cityseekr (If Available) Note: cityseekr point of interest information is limited to approximately 154 cities (132 in the U.S., 13 in Canada and 9 in Mexico). cityseekr, when available, is a service thatprovides more information about certainpoints of interest such as restaurants,hotels and attracti...

This icon appears when your selection exists in multiplecategories within the system. When you are viewing more information for hotels, cityseekr also tellsyou if the hotel has certain services and facilities using icons. Hotel Services and Facilities Restaurant 24 Hr Room Service Business Center Fi...

Setting Your Navigation Preferences Select settings for the system to take into account when planning yourroute. Press the Settings icon > Settings > Navigation. When you select: You can: Map Preferences Turn breadcrumbs on and off. Have the system display your turn list top tobottom or bottom...

When you select: You can: Traffic Preferences Choose how you want the system to handletraffic problems along your route. Automatic: Have the system reroute you to avoid traffic incidents that develop andimpact the current route (no notification isprovided). Manual: Have the system always provide a t...

Change the appearance of the mapdisplay by repeatedly pressing thearrow button in the upper leftcorner of the screen. It togglesbetween three different map modes:Heading up, North up, and 3D. Heading up (2D map) always shows the direction of forward travel to be upward on the screen. This view is av...

Map Icons Vehicle mark shows the current location of your vehicle. It stays in the center of the map display, except when in scrollmode. Scroll cursor allows you to scroll the map; the fixed icon is in the center of the screen. The map position closest to the cursoris in a window on the top center p...

“DESTINATION” “<nametag>” “<POI category>” “Favorites” “Home” “Intersection” “Nearest <POI category>” “Nearest POI” “Play nametags” “POI category” “Previous destination” “Street address” “Help” “NAVIGATION” “Destination” * “Zoom city” “Zoom country” “Zoom in minimum” “Zoom out maxi...

GENERAL INFORMATION SYNC® End User License Agreement (EULA) • You have acquired a device (“DEVICE”) that includes software licensed by FORD MOTOR COMPANY from an affiliate of MicrosoftCorporation (“MS”). Those installed software products of MS origin, aswell as associated media, printed materials, a...

SOFTWARE’s ability to use WMDRM to play or copy protectedcontent. This action does not affect unprotected content. When yourDEVICE downloads licenses for protected content, you agree thatMicrosoft may include a revocation list with the licenses. Contentowners may require you to upgrade the SOFTWARE ...

property rights in and to the content which may be accessed through useof the SOFTWARE is the property of the respective content owner andmay be protected by applicable copyright or other intellectual propertylaws and treaties. This EULA grants you no rights to use such content.All rights not specif...

End user notice Microsoft® Windows® Mobile for Automotive Important SafetyInformation This system Ford SYNC™ contains software that is licensed toManufacturer FORD MOTOR COMPANY by an affiliate of MicrosoftCorporation pursuant to a license agreement. Any removal, reproduction,reverse engineering or ...

Software, including without limitation all related intellectual propertyrights. No licenses or other rights which are not expressly granted in thisAgreement are intended to, or shall be, granted or conferred byimplication, statute, inducement, estoppel or otherwise, and TeleNav andits suppliers and ...

NavTeq End User License Agreement END USER TERMS The content provided (“Data”) is licensed, not sold. By opening thispackage, or installing, copying, or otherwise using the Data, you agree tobe bound by the terms of this agreement. If you do not agree to theterms of this agreement, you are not permi...

RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE OFTHE NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR ACTIONALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT,WHICH MAY RESULT FROM THE USE OR POSSESSION OF THISDATA; OR FOR ANY LOSS OF PROFIT, REVENUE, CONTRACTS ORSAVINGS, OR ANY OTHER DIRECT,...

rights similar to those customarily claimed by the United Statesgovernment, this Data is a “commercial item” as that term is defined at48 C.F.R. (“FAR”) 2.101, is licensed in accordance with this End UserLicense Agreement, and each copy of Data delivered or otherwisefurnished shall be marked and emb...

911 Assist™ ......................393, 469 A ABS (see Brakes) .....................212 Accessing and using your USBport ............................................447 Accessing call history/phonebook during active call .............383 Accessing your calendar ..........468 Accessing your media menu...

Voice commands in phonemode ..........................................380 Voice recognition ......................428 W Warning lights (see Lights) .....106 Washer fluid ..............................286 reservoir ..................................277 Water, Driving through .............245 Windows ...