Ford 2012 Focus v.2- Manuals

Warning symbols on your vehicle When you see this symbol, it isimperative that you consult therelevant section of this guide beforetouching or attempting adjustmentof any kind. Protecting the environment We must all play our part inprotecting the environment. Correctvehicle usage and the authorizedd...

SPECIAL NOTICES New Vehicle Limited Warranty For a detailed description of what is covered and what is not covered byyour vehicle’s New Vehicle Limited Warranty, refer to the Warranty Guide that is provided to you along with your Owner’s Guide. Special instructions For your added safety, your vehicl...

involving the deployment of an airbag or, in certain vehicles, theactivation of the fuel pump shut-off. Certain versions or updatesto 911 Assist may also be capable of being used to electronicallyor verbally provide to 911 operators the vehicle location (such aslatitude and longitude), and/or other ...

These are some of the symbols you may see on your vehicle. Vehicle Symbol Glossary Safety Alert See Owner’s Guide Fasten Safety Belt Airbag - Front Airbag - Side Child Seat LowerAnchor Child Seat TetherAnchor Brake System Anti-Lock Brake System Parking Brake System Brake Fluid -Non-Petroleum Based P...

WARNING LIGHTS AND CHIMES Instrument cluster with standard measure shown; metric similar Warning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause expensive repairs. A warning light mayilluminate when a problem exists with one of your vehicle’s functions.M...

Solid illumination after the engine is started indicates the on-boarddiagnostics system (OBD-II) has detected a malfunction. Refer to On-board diagnostics (OBD-II) in the Maintenance and Specifications chapter. If the light is blinking, engine misfire is occurring which coulddamage your catalytic co...

Anti-lock brake system: If the ABS light stays illuminated orcontinues to flash, a malfunction hasbeen detected. Contact yourauthorized dealer as soon aspossible. Normal braking is still functional unless the brake warning lightalso is illuminated. Airbag readiness: If this light fails to illuminate...

AdvanceTrac 威 off light: Illuminates whenAdvanceTrac 威 /Traction control has been disabled by the driver. Refer tothe Driving chapter for more information. Low tire pressure warning: Illuminates when your tire pressureis low. If the light remains on atstart up or while driving, the tirepressure shou...

GAUGES Base cluster shown in standard measure; uplevel cluster andmetric similar. 1. Tachometer: Indicates the engine speed in revolutions per minute. Driving with your tachometer pointer continuously at the top of the scalemay damage the engine. 2. Multifunction display: This is used to configure d...

Odometer : The odometer is displayed in the cluster and registers the total accumulated distance the vehicle has traveled. Trip odometer: Registers the distance of individual journeys. • Standard instrument cluster: Press the reset stem once to switch from the odometer to trip odometer . To reset th...

Menu Scroll up/down to highlight one of the options, then press the right arrowkey or OK to enter into that menu option. Trip 1 and 2 Compass display — displays the vehicle’s heading direction. Trip odometer — shows the accumulated trip distance. Displayed inthe middle line and is denoted by a 1 or ...

UP-LEVEL MESSAGE CENTER (IF EQUIPPED) WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsibility is the saf...

SYSTEM WARNINGS AND STATUS MESSAGES System warnings alert you to possible problems or malfunctions in yourvehicle’s operating systems. Note: Depending on the vehicle options equipped with your vehicle, not all of the messages will display or be available. In the event of a multiple warning situation...

Doors Message Action / Description HOOD OPEN Red Displays when the hood is notcompletely closed and thevehicle is moving. — Displays when the hood is notcompletely closed. Hill Start Assist Message Action / Description HILL START ASSISTACTIVE — Displays when hill start assistis active. HILL START AS...

Maintenance Message Action / Description WASHER FLUID LEVELLOW — Displays when the washerfluid is low and needs to berefilled. Refer to Windshield washer fluid in the Maintenance andSpecifications chapter. BRAKE SYSTEMMALFUNCTION STOPSAFELY Red Displays when the brakesystem needs servicing. Stopthe ...

Park Aid Message Action / Description PARKING AIDMALFUNCTION SERVICEREQUIRED Amber Displays when the system hasdetected a condition thatrequires service. Contact yourauthorized dealer. Park Brake Message Action / Description PARK BRAKE APPLIED Red Displays when the parkingbrake is set, the engine is...

Transmission Message Action / Description TRANSMISSIONMALFUNCTION SERVICENOW Red Displays when thetransmission requires servicedue to a malfunction. Contactyour authorized dealer. USE BRAKE STOP SAFELY Red Displays when the vehicleneeds to be brought to a safestop to allow the transmissionto cool. T...

Transmission Message Action / Description TRANSMISSION READY — Displays after an transmissionoverheating event and thetransmission has cooledenough to allow propertransmission function. TRANSMISSION LIMITEDFUNCTION Amber Displays when certaintransmission features aredisabled. TRANSMISSIONWARMING UP ...

Tire pressure Monitoring System (TPMS) Message Action / Description TIRE PRESSURE SENSORFAULT Amber Displays when a tire pressuresensor is malfunctioning, oryour spare tire is in use. Formore information on how thesystem operates under theseconditions, refer to Understanding Your TirePressure Monito...

AUDIO SYSTEMS AM/FM single CD/MP3 system (if equipped) WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsi...

• Audio Menu: Scroll to select Audio and then move right to enter the menu. Scroll to select from: • SCV level (if equipped): Scroll to select Speed compensated volume and move right to enter the menu. This featureautomatically adjusts the volume to compensate for speed andwind noise. You can set th...

Stereo icon: If this icon appears in your display, it means your systemis in stereo mode. 11. CD: Press to enter CD mode. (Eject): Press to eject a CD. AM/FM single CD/MP3, satellite radio and SYNC 姞 compatible (if equipped) WARNING: Driving while distracted can result in loss of vehicle control, ac...

5. Memory presets: To save a station, tune to the desired station. Press and hold a preset button until the information pop-up timer expires andstored preset # pop-up appears. 6. On/Off/Volume: Press to turn the system on or off. Turn to adjust the volume. 7. PHONE: Press to access SYNC 威 phone feat...

12. / (Reverse/Fast forward): Press to access the previous/next track. Press and hold for a fast reverse or advance througha track. 13. (Eject): Press to eject a CD. 14–17. Soft keys: Press to choose the corresponding selection (ifavailable) in the display. XXX XXX XXX XXX 17 16 15 14 Entertainment ...

Required equipment: 1. Any portable music player designed to be used with headphones 2. An audio extension cable with stereo male 1/8 in. (3.5 mm)connectors at each end To play your portable music player using the auxiliary input jack: 1. Begin with the vehicle parked and the radio turned off. 2. En...

GENERAL AUDIO INFORMATION Radio frequencies: AM and FM frequencies are established by the Federal CommunicationsCommission (FCC) and the Canadian Radio and TelecommunicationsCommission (CRTC). Those frequencies are: AM: 530, 540–1700, 1710 kHz FM: 87.7, 87.9–107.7, 107.9 MHz Radio reception factors:...

CD units are designed to play commercially pressed 4.75 in(12 cm) audio compact discs only. Due to technicalincompatibility, certain recordable and re-recordable compactdiscs may not function correctly when used in Ford CD players. Do not use any irregular shapedCDs or discs with a scratchprotection...

SYNC 姞 (IF EQUIPPED) Note: The following SYNC 威 information is to be used in conjunction with the vehicle’s compatible audio systems listed on the previous pages. Thissection is NOT to be used in conjunction with the touchscreen system(MyFord Touch™). If you have the MyFord Touch™ system, please ref...

Added benefits SYNC 威 even has some benefits which extend beyond your car. You can: • Access on-line support • Chat with other SYNC 威 owners • Search for and download new applications • Check frequently asked questions (FAQs) • Check your phone and other devices’ compatibility • Register and set up ...

System interaction and feedback The system provides feedback through audible tones, prompts, questionsand spoken confirmations depending on the situation and the chosenlevel of interaction (voice settings). You can customize your VR systemto provide more or less instruction and feedback. The default...

Helpful Hints • Ensure that the interior of the vehicle is as quiet as possible. Wind noise from open windows and road vibrations may prevent thesystem from correctly recognizing spoken commands. • After pulling , ensure that you wait until after the tone sounds and Listening appears in the display ...

Pairing a phone for the first time The first thing you must do to use a phone with the system is towirelessly pair your phone with SYNC. Doing so allows your phone tocommunicate with the hands-free system, thereby enabling you to makeand receive hands-free calls. Note: To scroll through the menus, p...

2. Press PHONE or and scroll until System Settings is selected. 3. Press OK and scroll until Bluetooth Devices is selected and press OK. 4. Scroll until Add Bluetooth Device is selected and press OK. 5. When Find SYNC appears in the display, press OK. 6. Put your phone into Bluetooth discovery mode....

Phone book commands: When you ask SYNC 威 to access a phone book name, number, etc., the requested information will appear in the displayto view. Press or PHONE or say “Call” to call the contact. * If you have said, “Dial” you can say any of the followingcommands: • <number> 0–9 • Dial • Delete...

Making a call To make a call, pull and when prompted say: • “Call <name>” or • “Dial” and the desired number. When the system confirms the number, say “Dial” again to initiate the call. Note: To erase the last spoken digit, say “Delete” or press . To erase all spoken digits, say “Clear” or pre...

Phone options during an active call During an active call, you have additional menu features which becomeavailable such as putting a call on hold, joining calls, etc. Privacy Call Hold Enter Tones Join Calls Phonebook Call History Return Entertainment Systems 68 2012 Focus (foc) Owners Guide, 2nd Pr...

Scrolling through the menus: Use / to scroll through the menu options. To access: 1. Press MENU during an active call to enter the Active Call Menu . 2. Scroll to cycle through the following options: Mute Call?: Enables you to mute the current call so that you can have a private conversation in the ...

Join Calls : Allows you to join two separate calls and speak to both through SYNC. 1. Press or PHONE to put your first call on hold. 2. Access the desired contact through SYNC or use voicecommands to place the second call. Once actively in the secondcall, press MENU.3. Scroll until Join Calls appear...

+ Denotes submenus with additional menu items Scrolling through the menus: Use / to scroll through the menu options. Accessing features through the phone menu SYNC’s phone menu allows you to redial a number, access your callhistory and phone book and send text messages as well as accessingphone and ...

Phone Settings : These are phone dependent features which allow you to view your phone’s status, set a ring tone, select your messagenotification, change phone book entries and also to automaticallydownload your cellular phone among other features. • Please refer to Phone Settings in the following s...

2. Pull , wait for the prompt and say, “Read Message” to have SYNC read the message to you. 3. Press OK to receive and open the text message or do nothing and themessage will go into your text message inbox. Press OK again andSYNC 威 will read your message aloud as you are not able to view the messag...

• No • Where R you? • Thanks • I love you • I need more directions • Can’t wait to see you • Too funny • Be there in 10 minutes • I’m stuck in traffic 4. Press OK when the desired selection is in the display. Thesystem will now need to know to whom you would like to send themessage. 5. Scroll to cyc...

Accessing your phone settings These are phone dependent features. Your phone settings allow you to access and adjust features such as your ring tone, text messagenotification, modifying your phone book and also setting up automaticdownload. To access: 1. Press PHONE or . 2. Scroll until Phone Settin...

• Download Phonebook : Press OK to select and press OK again when Confirm Download? appears. • Delete Contact : Press OK to delete a specific contact. When Select Contact appears, press OK again and scroll until the name is selected. Press OK to select and again to confirm. Note: If automatic downlo...

Bluetooth Device menu options This menu allows you to add, connect, delete, set a phone as primary, aswell as turn Bluetooth on and off. To access: 1. Press PHONE or to enter the Phone Menu . 2. Scroll until System Settings appears and press OK. 3. Scroll until Bluetooth Devices appears and select O...

Set As Primary Phone? : Select to set a previously paired phone as your primary phone. SYNC will attempt to connect with the primaryphone at every ignition cycle. • Press OK to select and scroll to select the desired phone. Press OK to confirm. Note: When a phone is selected as primary, it will appe...

Accessing and using your SYNC applications and Services(if equipped) In addition to the standard phone and media options which SYNC offers,your system also includes advanced features such as: • 911 Assist™: Can alert 911 in the event of an emergency. • Vehicle Health Report (if equipped, U.S. only):...

Push to interrupt: You can, at any time while you are connected to SYNC TDI Services, pull to interrupt a voice prompt or an audio clip (such as a sports report) and say your voice command. Portable: Your SYNC TDI Services subscription is associated with your Bluetooth enabled cellular phone number,...

911 Assist™ (if equipped) For 911 Assist™ to function properly, the vehicle must havebattery power after the crash, the cell phone must be previouslypaired, connected to SYNC 威 , and continue to function properly with the ability to make and maintain a 911 call initiated bySYNC 威 , and the 911 Assis...

Vehicle health report (if equipped, U.S. only) WARNING: Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. Vehicle Health Reports supplements, but cannotreplace normal maintenance and vehicle inspection. Vehicle He...

Media features with SYNC SYNC 威 allows you to access and play music from your digital musicplayer over the vehicle’s speakersystem using the system’s mediamenu or voice commands. You can also choose to sort and playyour music by specific metadatacategories such as: • Artists • Albums • Genres • Play...

To connect using the system menu: 1. Plug the device into the vehicle’s USB port. 2. Press AUX and then MENU to enter the Media Menu . 3. Scroll until Select Source appears and press OK. 4. Scroll to select USB and press OK. 5. Depending on how many digital media files are on yourconnected device, I...

What’s playing? At any time while a track is playing, you can pull and say, “What’s playing?”. SYNC will read the metadata tags of the playing track to you(if populated). Media voice commands Pull and when prompted, say, “USB” . You may then say any of the following: • Play all • Play • Pause • What...

Maneuvering the media menu Below is a graphical representation of how the phone menu lays out inyour system. It will be explained in more detail in this chapter, but thismay help you to better visualize the menu structure. + Denotes submenus with additional menu items Scrolling through the menus: Pr...

Accessing the features of your media menu SYNC’s media menu allows you to select which source you would like tolisten to, how you would like to play your music (by artist, genre, shuffle,repeat, etc.), and also if you need to add, connect or delete devices. To access your media menu: 1. Press AUX an...

Artists : Allows you to sort all indexed media by artist. Once selected, the system will list and then play all artists and tracks alphabetically. Ifthere are less than 255 indexed artist, they will be listed alphabetically inflat file mode. If there are more, they will be categorized intoalphabetic...

Explore USB: Allows you to explore through all supported digital media on your media device connected to the USB port. Note: When exploring, you will only be able to view media content which is compatible withSYNC. You may have other files saved with various extensions, but theywill not be visible. ...

Troubleshooting Your SYNC 威 system is easy to use. However, should questions arise, please refer to the tables below as well as the Helpful Hints section that follows. Use the website at any time to check your phone’s compatibility, registeryour account and set preferences as well as access a custom...

services of third party origin, as well as associated media, printedmaterials, and “online” or electronic documentation (“THRID PARTYSOFTWARE”) are protected by international intellectual property lawsand treaties. The THIRD PARTY SOFTWARE is licensed, not sold. Allrights reserved. • The MS SOFTWARE...

• Single EULA: The end user documentation for the DEVICE and related systems and services may contain multiple EULAs, such asmultiple translations and/or multiple media versions (e.g., in the userdocumentation and in the software). Even if you receive multipleEULAs, you are licensed to use only one ...

• Internet-Based Services Components: The SOFTWARE may contain components that enable and facilitate the use of certainInternet-based services. You acknowledge and agree that MS, MicrosoftCorporation, FORD MOTOR COMPANY, third party software andservice suppliers, their affiliates and/or their design...

PRODUCT SUPPORT: Product support for the SOFTWARE is not provided by MS, its parent corporation Microsoft Corporation, or theiraffiliates or subsidiaries. For product support, please refer to FORDMOTOR COMPANY instructions provided in the documentation for theDEVICE. Should you have any questions co...

WARNING: Operating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or other serious consequences. Do not changesystem settings or enter data non-verbally (using your hands) whiledriving. Stop the vehicle in a safe and legal ma...

SINGLE ZONE MANUAL SYSTEM (IF EQUIPPED) Temperature conversion: To switch between Fahrenheit and Celsius, refer to the Message Center section of the Instrument Cluster chapter. 1. (Fan speed adjustment): Turn to select the desired fan speed. 2. (Recirculated air): Press to activate/deactivate air re...

5. Multifunction control: Turn to manually choose one of the following air distribution modes: • (Panel): Distributes air through the instrument panel vents. • (Floor and Panel): Distributes air through the instrument panel vents, demister vents, floor vents and rear seat floor vents. • (Floor): Dis...

For maximum cooling performance in MAX A/C mode: 1. Select MAX A/C. 2. Set the airflow to the (Panel). 3. Set the fan to the highest speed initially. As the interior starts to cooldown, adjust the fan speed to maintain comfort. To aid in side window defogging/demisting in cold weather: 1. Select . 2...

Driver setting: Turn this knob to increase/decrease the temperature for the entire vehicle cabin (single zone). When the system is in single zone,MONO will appear in the display. If the passenger side control (3) isactivated, then dual zone will be active, and this control will only adjusttemperatur...

To aid in side window defogging/demisting in cold weather: 1. Select . 2. Select A/C. 3. Adjust the temperature control to maintain comfort. 4. Set the fan to the highest speed. 5. Direct the outer instrument panel vents toward the side windows. To increase airflow to the outer instrument panel vent...

CABIN AIR FILTER Your cabin air filter is located in the passenger foot well area. The cabinair filter element is designed to reduce the concentration of airborneparticles such as dust, spores and pollen in the air being supplied to theinterior of the vehicle. The presence of a particulate filter el...

HEADLAMP CONTROL Turns the lamps off. Turns on the parking lamps, instrument panel lamps,license plate lamps and tail lamps. Turns the headlamps on. Note: The head lamp indicator will illuminate when the head lamps are activated. Autolamp control (if equipped) The autolamp system provides lightsensi...

Fog lamp control (if equipped) The fog lamps can be turned onwhen the headlamp control is in the , , or positions and the high beams are not turnedon. • Press the fog lamp control,located on the instrument panel,to activate the fog lamps. • Press the fog lamp control againto deactivate the fog lamps...

WARNING: Always remember to turn on your headlamps at dusk or during inclement weather. The Daytime Running Lamp (DRL) system does not activate the tail lamps and generally may notprovide adequate lighting during these conditions. Failure to activateyour headlamps under these conditions may result i...

• Tap the left control to dim allinterior lit componentsincrementally, or • Press and hold the left controluntil the desired lighting level isreached. Note: If the battery is disconnected, discharged, or a new battery is installed, the dimmer will set the illuminated components to themaximum setting...

On the wall or screen you willobserve a flat zone of high intensitylight located at the top of the righthand portion of the beam pattern. Ifthe top edge of the high intensitylight zone is not at the horizontalreference line, the headlamp willneed to be adjusted. 4. Locate the vertical adjuster oneac...

Ambient lighting (if equipped) Illuminates several areas (footwells,cupholder and doors ) with a choiceof several colors. The ambientlighting control switch is located inthe overhead console. • To activate, rotate the controlknob past the first detent andadjust to the desired brightness. • Use the l...

Replacing headlamp bulbs 1. Make sure the headlamp controlis in the off position and open thehood. 2. Remove the two screw from theheadlamp assembly. 3. Carefully pull the headlampassembly up and away from thevehicle. Low beam headlamp: • Remove service cap anddisconnect the electricalconnector. • R...

WINDSHIELD WIPERS Move the lever down for a singlewipe. Move the control up one position for intermittent operation.Adjust the rotary control to thedesired speed. Move the control up two positionsfor low-speed wiping or three positions for high-speed wiping. The wipers may be moved manually with the...

Windshield washer Pull the control toward you to activate the windshield washer. Release the control to stop washer fluid spray. The wipers will operatefor a short time after the washer is turned off. Courtesy wipe feature One extra wipe will happen a few seconds after washing the frontwindow to cle...

Window lock The window lock feature allows onlythe driver and front passenger tooperate the power windows. To lock out all the window controls(except for the driver’s and frontpassenger’s) press the control. Alight on the control will illuminatewhen the windows are locked. Pressthe control again to ...

Fold-away mirrors Fold the side mirrors in carefullywhen driving through a narrowspace, like an automatic car wash. Blind spot mirrors Your vehicle is equipped with blind spot mirrors. Refer to Blind spot mirrors in the Driving chapter. SPEED CONTROL (IF EQUIPPED) With speed control set, you can mai...

Turning off speed control To turn off the speed control, press and release OFF or turn off theignition. Note: When you turn off the speed control or the ignition, your speed control set speed memory is erased. STEERING WHEEL CONTROLS (IF EQUIPPED) Audio control features (if equipped) Press the arrow...

UNIVERSAL GARAGE DOOR OPENER (IF EQUIPPED) Your vehicle may be equipped with a universal garage door opener whichcan be used to replace the common hand-held transmitter. HomeLink 姞 Wireless Control System (if equipped) The HomeLink 威 Wireless Control System, located on the driver’s visor,provides a ...

1. Position the end of yourhand-held transmitter 1–3 inches(2–8 cm) away from the HomeLink 威 button you wish to program (locatedon your visor) while keeping theindicator light in view. 2. Simultaneously press and holdboth the chosen HomeLink 威 and hand-held transmitter buttons until the HomeLink 威 i...

Gate Operator & Canadian Programming During programming, yourhand-held transmitter mayautomatically stop transmitting —not allowing enough time forHomeLink 威 to accept the signal from the hand-held transmitter. After completing Step 1 outlined inthe Programming section, replace Step 2 with the f...

Erasing HomeLink 姞 buttons To erase the three programmedbuttons (individual buttons cannotbe erased): • Press and hold the two outerHomeLink 威 buttons until the indicator light begins toflash-after 20 seconds. Releaseboth buttons. Do not hold forlonger that 30 seconds. HomeLink 威 is now in the train...

POSITIVE RETENTION FLOOR MAT WARNING: Do not install additional floor mats on top of the factory installed floor mats as they may interfere with the accelerator or the brake pedals. Position the floor mat so that theeyelets are over the retention postsand press down to lock in. Makesure that the mat...

KEYS Integrated keyhead transmitters (IKTs) (if equipped) Your vehicle may be equipped withtwo integrated keyhead transmitters(IKTs). The key blade is used tostart the vehicle and unlock/lock thedriver’s door from outside thevehicle. The transmitter portionfunctions as the remote entrytransmitter. Y...

Intelligent Access Key (IA key) (if equipped) Your vehicle may be equipped withtwo intelligent access keys whichoperate the power locks and theremote entry system. You have tohave the IA key in the vehicle toactivate the push button startsystem. The IA key also contains a removablemechanical key bla...

admin keys are programmed to the vehicle, and see the total distancethe vehicle has been driven with the MyKey 威 active. MyKey 威 restricted features Standard settings – these settings cannot be changed • Belt-Minder 威 cannot be cleared and will not expire. The audio system will be muted whenever Bel...

Refer to Message center in the Instrument Cluster chapter for vehicle information displays. Using MyKey 威 with remote start systems MyKey 威 is not compatible with non-Ford approved aftermarket remote start systems. If you choose to install a remote start system please seeyour authorized dealer for a...

Autolock (if equipped) The autolock feature will lock all the doors when: • all doors are closed, • the ignition is on, • you shift into any gear putting the vehicle in motion, and • the vehicle attains a speed greater than 4 mph (7 km/h). If a door is unlocked, the autolock feature will repeat when...

REMOTE ENTRY SYSTEM (IF EQUIPPED) FCC ID: LXP-RX4318 IC: 2298A-RX4318 The integrated keyhead transmitters (IKTs) and intelligent access keys(IA key) comply with part 15 of the FCC rules and with RSS-210 ofIndustry Canada. Operation is subject to the following two conditions:(1) This device may not c...

handle, the luggage compartment handle, or a button on the transmitteritself). If excessive RF interference is present in the area, or if yourvehicle battery is low, it may be necessary to mechanically unlock yourdoor. The mechanical key blade in your IA key can be used to open thedriver’s door in t...

simultaneously). The turn signal lamps will illuminate twice to indicatethat two-stage unlock was enabled or disabled. The unlocking mode willbe applied to remote entry, keyless entry and intelligent access (ifequipped). Two-stage unlocking may also be disabled or enabled through themessage center i...

3. Twist a flat object in the positionshown to separate the two halves ofthe transmitter. 4. Carefully insert a flat object inthe position show to open thetransmitter. 5. Carefully pry out the battery with a flat object. Note: Please refer to local regulations when disposing of transmitter batteries...

SECURILOCK 姞 PASSIVE ANTI-THEFT SYSTEM SecuriLock 威 passive anti-theft system is an engine immobilization system. This system is designed to help prevent the engine from beingstarted unless a coded integrated keyhead transmitter (IKT) or intelligent access keys programmed to your vehicle is used. Th...

Replacement of integrated keyhead transmitters (IKT) or intelligentaccess keys Note: Your vehicle comes equipped with two integrated keyhead transmitters (IKTs) or two intelligent access keys. The integrated keyhead transmitter (IKT) functions as both a programmed ignition key that operates all the ...

PERIMETER ALARM SYSTEM (IF EQUIPPED) The perimeter anti-theft system will warn you in the event of anunauthorized entry to your vehicle. If there is any potential perimeter anti-theft problem with your vehicle,ensure ALL remote entry transmitters are taken to the authorized dealer to aid in troubles...

WARNING: To minimize the risk of neck injury in the event of a crash, head restraints must be installed properly. Adjusting the front manual seats WARNING: Never adjust the driver’s seat or seatback when the vehicle is moving. WARNING: Sitting improperly out of position or with the seat back recline...

• Up-down seat adjustment (driver’s side only) Pull up on the control to raise theseat and push down on the controlto lower the seat. • Recline adjustment Lift the control to adjust the angleof the seatback. WARNING: Reclining the seatback can cause an occupant to slide under the seat’s safety belt,...

Adjusting the front power seat (if equipped) WARNING: Never adjust the driver’s seat or seatback when the vehicle is moving. WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing s...

To operate the heated seats, turn the thumbwheel to the desired heatsetting 0–5: • Setting 0 is off, 1 is the lowestheat setting and setting 5 is thehighest. REAR SEATS Second row head restraints Outboard seat positions Your vehicle is equipped with removable outboard head restraints. WARNING: To mi...

Center seat position Your vehicle is equipped with a second row center head restraint that isvertically adjustable and removable. The adjustable center head restraintconsists of: • a trimmed energy absorbing foamand structure (1), • two steel stems (2), • a guide sleeve adjust/releasebutton (3), • a...

Driver and passenger dual-stage airbag supplemental restraints The dual-stage airbags offer the capability to tailor the level of airbaginflation energy. A lower, less forceful energy level is provided for morecommon, moderate-severity impacts. A higher energy level is used forthe most severe impact...

The front passenger sensing system can automatically turn off thepassenger front airbag. The system is designed to help protect small(child size) occupants from airbag deployments when they areimproperly seated or restrained in the front passenger seat contrary toproper child-seating or restraint us...

The Restraints Control Module (RCM) monitors its own internal circuitsand the circuits for the airbag supplemental restraints, crash sensor(s),safety belt pretensioners, front safety belt buckle sensors, frontpassenger sensing system, and the driver seat position sensor. Inaddition, the RCM also mon...

WARNING: In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. WARNING: Each seating position in your vehicle has a specific safety belt assembly which is made up of one buckle and one tongue that are designed to be used as a pair. 1) Use the ...

2. To unfasten, press the releasebutton and remove the tongue fromthe buckle. Restraint of pregnant women WARNING: Always ride and drive with your seatback upright and the safety belt properly fastened. The lap portion of the safety belt should fit snug and be positioned low across the hips. The sho...

(8 km/h) or more, the combination safety belts will lock to help reduceforward movement of the driver and passengers.In addition, the retractor is designed to lock if the webbing is pulled outtoo quickly. If this occurs, let the belt retract slightly and pull webbingout again in a slow and controlle...

Safety belt warning light and indicator chime The safety belt warning light illuminates in the instrument cluster and achime sounds to remind the occupants to fasten their safety belts. Conditions of operation If... Then... The driver’s safety belt is notbuckled before the ignitionswitch is turned t...

The following are reasons most often given for not wearing safety belts(All statistics based on U.S. data): Reasons given... Consider... “Crashes are rare events” 36700 crashes occur every day. The more we drive, the more we areexposed to “rare” events, even forgood drivers. 1 in 4 of us will be ser...

1. Turn the ignition on. DO NOT START THE ENGINE. 2. Wait until the safety belt warning light turns off (approximately oneminute). • Once the next step is started, the procedure must be completedwithin 60 seconds. 3. For the seating position being disabled, buckle then unbuckle thesafety belt four t...

are not properly restrained or are otherwise out of position at the timeof airbag deployment. Thus, it is extremely important that occupants beproperly restrained as far away from the airbag module as possible whilemaintaining vehicle control. WARNING: Several air bag system components get hot after...

• Objects placed on the occupant’s lap • Cargo interference with the seat • Other passengers pushing or pulling on the seat • Rear passenger feet and knees resting or pushing on the seat The conditions listed above may cause the weight of a properly seatedoccupant to be incorrectly interpreted by th...

WARNING: Do not use accessory seat covers. The use of accessory seat covers may prevent the deployment of the side airbags and increase the risk of injury in an accident. WARNING: Do not lean your head on the door. The side airbag could injure you as it deploys from the side of the seatback. WARNING...

Side airbags, in combination with safety belts, can help reduce the risk ofsevere injuries in the event of a significant side impact collision. The side airbags are fitted on the outboard side of the seatbacks of thefront seats. In certain lateral collisions, the airbag on the side affected bythe co...

Side-curtain airbag system WARNING: Do not place objects or mount equipment on or near the headliner at thesiderail that may come intocontact with a deploying side aircurtain. Failure to follow theseinstructions may increase the riskof personal injury in the event of acollision. WARNING: Do not plac...

window area and occupant to further enhance the head protectionprovided to occupants in side impact collisions. The seat-mounted sideairbag was designed to inflate between the door panel and occupant tofurther enhance the protection provided occupants in side impactcollisions. The side air curtain s...

• The readiness light will not illuminate immediately after ignition isturned on. • An information message will appear in the message center. If any of these things happen, even intermittently, have the SRS servicedat your authorized dealer immediately. Unless serviced, the system maynot function pr...

WARNING: All children are shaped differently. The Recommendations for Safety Restraints are based on probable child height, age and weight thresholds from NHTSA and other safetyorganizations or are the minimum requirements of law. Fordrecommends checking with a NHTSA Certified Child Passenger Safety...

Recommendations for attaching child safety restraints for children RestraintType Child Weight Use any attachment method as indicated below by “X” LATCH(loweranchorsandtoptetheranchor) LATCH(loweranchorsonly) Safetybeltandtoptetheranchor Safetybelt andLATCH(loweranchorsand toptetheranchor) Safetybelt...

WARNING: Always carefully follow the instructions and warnings provided by the manufacturer of any child restraint to determine if the restraint device is appropriate for your child’s size,height, weight, or age. Follow the child restraint manufacturer’sinstructions and warnings provided for install...

the correct restraint system. Ford recommends checking with a NHTSACertified Child Passenger Safety Technician (CPST) and yourpediatrician to make sure your seat is appropriate for your child andproperly installed in the vehicle. To locate a child seat fitting station andCPST contact the NHTSA toll ...

4. Insert the belt tongue into theproper buckle (the buckle closest tothe direction the tongue is comingfrom) for that seating position untilyou hear a snap and feel the latchengage. Make sure the tongue islatched securely by pulling on it. 5. To put the retractor in theautomatic locking mode, grasp...

Use of inboard lower anchors from the outboard seating positions(center seating use) The lower anchors at the center of the second row rear seat are spaced18 inches (450 mm) apart. The standardized spacing for LATCH loweranchors is 11 inches (280 mm) center to center. A child seat with rigidLATCH at...

Child booster seats The belt-positioning booster (booster seat) is used to improve the fit ofthe vehicle safety belt. Children outgrow a typical child seat (e.g.,convertible or toddler seat) when they weigh about 40 lb (18 kg) and arearound four (4) years of age. Consult your child safety seat owner...

Children and booster seats vary in size and shape. Choose a booster thatkeeps the lap belt low and snug across the hips, never up across thestomach, and lets you adjust the shoulder belt to cross the chest andrest snugly near the center of the shoulder. The drawings below comparethe ideal fit (cente...

Follow all instructions provided by the manufacturer of the booster seat. WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the riskof injury or death in a collis...

IMPORTANT INFORMATION FOR 235/40R18 LOW-PROFILE TIRESAND WHEELS If your vehicle is equipped with 235/40R18 tires, they are low-profiletires. These tires and wheels are designed to give your vehicle a sportappearance. With low-profile tires, you may notice an increase in roadnoise and faster tire wea...

graded 100. The relative performance of tires depends upon the actualconditions of their use, however, and may depart significantly from thenorm due to variations in driving habits, service practices, anddifferences in road characteristics and climate. Traction AA A B C The traction grades, from hig...

At least once a month and before long trips, inspect each tire and checkthe tire pressure with a tire gauge (including spare, if equipped). Inflateall tires to the inflation pressure recommended by Ford Motor Company. You are strongly urged to buy a reliable tire pressure gauge, as automaticservice ...

To check the pressure in your tire(s): 1. Make sure the tires are cool, meaning they are not hot from drivingeven a mile. If you are checking tire pressure when the tire is hot, (i.e. driven morethan 1 mile [1.6 km]), never “bleed” or reduce air pressure. The tires arehot from driving and it is norm...

other signs of damage or excessive wear. If internal damage to the tire issuspected, have the tire demounted and inspected in case it needs to berepaired or replaced. For your safety, tires that are damaged or showsigns of excessive wear should not be used because they are more likelyto blow out or ...

U.S. DOT Tire Identification Number (TIN) Both U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the sidewall of all tires. Thisinformation identifies and describes the fundamental characteristics ofthe tire and also provides a U.S. DOT Tire Identific...

WARNING: When mounting replacement tires and wheels, you should not exceed the maximum pressure indicated on the sidewall of the tire to set the beads without additional precautionslisted below. If the beads do not seat at the maximum pressureindicated, re-lubricate and try again.When inflating the ...

• Do not run over curbs or hit the tire against a curb when parking WARNING: If your vehicle is stuck in snow, mud, sand, etc., do not rapidly spin the tires; spinning the tires can tear the tire and cause an explosion. A tire can explode in as little as three to fiveseconds. WARNING: Do not spin th...

Tire rotation Rotating your tires at the recommended interval (as indicated in the Scheduled Maintenance chapter) will help your tires wear more evenly, providing better tire performance and longer tire life. • Front-wheel drive (FWD) vehicles(front tires at top of diagram) Sometimes irregular tire ...

Information on “P” type tires P215/65R15 95H is an example of atire size, load index and speedrating. The definitions of theseitems are listed below. (Note thatthe tire size, load index and speedrating for your vehicle may bedifferent from this example.) 1. P: Indicates a tire, designated by the Tir...

12. Treadwear, Traction and Temperature Grades • Treadwear: The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on aspecified government test course. For example, a tire graded 150would wear one and one-half (1 1 ⁄ 2 ) times as well ...

Additional information contained on the tire sidewall for “LT” typetires “LT” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below. Note: Tire Quality Grades do not apply to this type of tire. 1. LT: Indicates a tire, designated by the Tire a...

Information on “T” type tires “T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below: T145/80D16 is an example of a tiresize. Note: The temporary tire size for your vehicle may be different fromthis example. Tire Quality Grades donot apply ...

following two conditions: (1) This device may not cause harmfulinterference, and (2) This device must accept any interference received,including interference that may cause undesired operation. WARNING: The tire pressure monitoring system is NOT a substitute for manually checking tire pressure. The ...

To restore the full functionality of the tire pressure monitoring system,have the damaged road wheel/tire repaired and remounted on yourvehicle. For additional information, refer to Changing tires with a TPMS in this section. When you believe your system is not operating properly The main function o...

Low tirepressurewarning light Possible cause Customer action required Flashingwarning light Spare tire in use Repair the damaged road wheel/tire and reinstall it on the vehicle torestore system functionality. For adescription on how the systemfunctions, refer to When your temporary spare tire is ins...

SNOW TIRES AND CHAINS WARNING: Snow tires must be the same size, load index, speed rating as those originally provided by Ford. Use of any tire or wheel not recommended by Ford can affect the safety andperformance of your vehicle, which could result in an increased risk ofloss of vehicle control, ve...

SUMMER TIRES Your Ford vehicle may be equipped with summer tires to providesuperior performance on wet and dry roads. Summer tires do not havethe Mud and Snow (M+S or M/S) tire traction rating on the tire sidewall. Since summer tires do not have the same traction performance asAll-season or Snow tir...

Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Label on the B-Pillar or the edge of the driver’s door(vehicles exported outside the US and Canada may not have a TireLabel). Look for “THE COMBINED WEI...

Example only: Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all payload. Tires, Wheels and Loading 251 2012 Focus (foc) O...

GAWR (Gross Axle Weight Rating) – is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Safety Compliance Certification Labellocated on the B-Pillar or the edge of the driver’s door. The totalload on each axle must never exceed its GAWR....

WARNING: Do not use replacement tires with lower load carrying capacities than the original tires because they may lower the vehicle’s GVWR and GAWR limitations. Replacement tireswith a higher limit than the original tires do not increase the GVWRand GAWR limitations. WARNING: Exceeding any vehicle ...

• A final example for your vehicle with 1400 lb. (635 kg) of cargo andluggage capacity. You and one of your friends decide to pick upcement from the local home improvement store to finish that patioyou have been planning for the past 2 years. Measuring the inside ofthe vehicle with the rear seat fol...

Before you tow your vehicle, follow these directions for your specificvehicle configuration after it is hooked-up to the RV or tow dolly: Vehicles with a manual transmission: 1. Release the parking brake. 2. Move the gearshift to the neutral position. 3. The maximum towing speed is 70 mph (113 km/h)...

STARTING Positions of the ignition If your vehicle is equipped with a push button start system, refer to Push button start system in this section for ignition modes. 1. 0 (off) — locks the automatictransmission gearshift lever andallows key removal. This positionalso shuts the engine and allelectric...

Starting the engine Note: If your vehicle is equipped with a push button start system, refer to Push button start system in this section for starting. 1. Turn the key to II (on) withoutturning the key to III (start). 2. Turn the key to III (start), thenrelease the key as soon as theengine begins cra...

Ignition modes 1. Off — press and release the START/STOP button without applying thebrake pedal (automatic transmission) or clutch pedal (manualtransmission) when your vehicle is in on mode or when the engine isrunning. Note: In order to switch off the engine while the vehicle is in motion, press an...

Backup method of starting: Your IA key uses a radio frequency signalto communicate with your vehicleand authorize your vehicle to startwhen you press the START/STOPbutton and apply the brake pedal orclutch pedal. If excessive radiofrequency interference is present inthe area, or if the battery in yo...

vehicle may have taken the IA key when exiting the vehicle. If the IA keyis no longer present in the vehicle, you will not be able to re-start yourvehicle outside of the Fast Restart time (see Fast Restart Feature above). It is important to be aware of where your IA key is located in thevehicle, to ...

outdoors, in cold temperatures, and is clearly marked “Suitable for Usewith Outdoor Appliances.” Never use an indoor extension cordoutdoors; it could result in an electric shock or fire hazard. • Use a 16-gauge outdoor extension cord, minimum. • Use as short an extension cord as possible. • Do not u...

Make sure system is unplugged and properly stowed before driving thevehicle. While not in use, make sure the protective cover seals theprongs of the engine block heater cord plug. BRAKES Occasional brake noise is normal. If a metal-to-metal, continuous grindingor continuous squeal sound is present, ...

Brake assist The brake assist system provides full braking force during panic brakingsituations. It detects a rapid application of the brake pedal and uses theABS system to achieve maximum braking pressure. Once a panic brakeapplication is detected, the system will remain activated as long as thebra...

Certain adverse driving maneuvers may activate the ESC system, whichinclude but are not limited to: • Taking a turn too fast • Maneuvering quickly to avoid an accident, pedestrian or obstacle • Driving over a patch of ice or other slippery surfaces • Changing lanes on a snow-rutted road • Entering a...

WARNING: The EPS has diagnostics checks that continuously monitor the EPS to ensure proper operation of the electronic system. When an electronic error is detected, the message STEERINGASSIST FAULT SERVICE REQUIRED will be displayed in the messagecenter. If this happens, stop the vehicle in a safe p...

AUTOMATIC TRANSMISSION OPERATION (IF EQUIPPED) Understanding the gearshift positions of the 6–speed automatictransmission (if equipped) P (Park) This position locks the transmissionand prevents the front wheels fromturning. To put your vehicle in gear: • Press the brake pedal • Move the gearshift le...

L (Low) This position: • Provides maximum engine braking. • Will downshift to the lowest available gear for the current vehiclespeed; allows for first gear when vehicle reaches slower speeds. • Is not intended for use under extended or normal driving conditionsand results in lower fuel economy. Unde...

The SST will automatically upshift if the engine reaches maximum RPMand the driver has not selected the proper gear for vehicle speed to helpprevent engine damage caused by excessive over-revving. Engine damage may occur if excessive engine revving is heldwithout shifting. Hill start assist (HSA) sy...

3. When you remove your foot from the brake pedal, the vehicle willremain on the slope without rolling away for approximately two to threeseconds. This hold time will automatically be extended if you are in theprocess of driving off. 4. Drive off in the normal manner. The brakes will be releasedauto...

MANUAL TRANSMISSION OPERATION (IF EQUIPPED) Using the clutch Manual transmission vehicles have a starter interlock that preventscranking the engine unless the clutch pedal is fully pressed. To start the vehicle: 1. Make sure the parking brake is fully set. 2. Press the clutch pedal to thefloor, then...

Upshift according to the following chart: Recommended upshifts (for best fuel economy) when accelerating 5-speed manual transmission Shift from: 1 - 2 14 mph (23 km/h) 2 - 3 24 mph (39 km/h) 3 - 4 32 mph (51 km/h) 4 - 5 44 mph (71 km/h) Reverse Make sure that your vehicle is at a complete stop befor...

FORWARD AND REVERSE SENSING SYSTEMS (IF EQUIPPED) The forward and reverse sensing system will warn the driver of obstacleswithin a certain range of the front and rear bumpers. The front sensors will be activewhen the gearshift is in any positionother than P (Park) or N (Neutral)and the vehicle speed...

If the vehicle is equipped with aforward and reverse sensing system,the driver can disable the entiresystem (front and rear sensors) bypressing the parking aid off switchlocated on the lower portion of thecenter console. The message center will indicate afailure in the forward or reversesystem and w...

The rear video camera includes the following features that will assist thedriver in reverse driving. Active guidelines, fixed guidelines and centerline The active guidelines show the path of intended motion of the vehiclewhile reversing. The fixed guidelines assist a driver with backing into aparkin...

To use active guidelines, turn the steering wheel and point the activeguidelines towards an intended path. If the steering wheel position ischanged while reversing, the vehicle might deviate from the originalintended path. Active guidelines project the intended path of the vehicle. Fixedguidelines s...

When enabled, Level 1, Level 2, or Level 3 will only be active while thevehicle is in R (Reverse). The feature disables outside of R (Reverse)and must be re-enabled the next time the vehicle shifts into R (Reverse). When manual zoom is enabled, onlythe centerline will be shown. Rear camera delay Aft...

Note: If the camera system image is not clear or seems distorted, it may be covered with water droplets, snow, mud or any other substance. Ifthis occurs, clean the camera lens before using the camera system. WARNING: The rearview camera system is a reverse aid supplement device that still requires t...

Servicing • If the image comes on while the vehicle is not in R (Reverse), havethe system inspected by your authorized dealer. • If the image is not clear, check if anything is covering the lens such asdirt, mud, ice, snow, etc. If the image is still not clear after cleaning,have your system inspect...

For best performance, drive the vehicle as parallel as possible whilepassing a parking space. If driven too fast (above 18 mph [30 km/h]) forthe system to measure parking spaces, the information display will showa corresponding message. When the system has found a space, the information display will...

When you determine the vehicle is back far enough, bring the vehicle toa complete stop and move the gearshift to D (Drive). When you determine the vehicle is far enough forward, bring the vehicleto a complete stop and move the gearshift to R (Reverse). Follow theinformation display instructions. The...

Why doesn’t APA position the vehicle where I want in the space? • The driver allows the vehicle to roll in the opposite direction of thetransmission (such as rolling forward when R (Reverse) gear isselected. • You may be driving in R (Reverse). APA can only look for a parkingspace while moving forwa...

BLIND SPOT MIRRORS Blind spot mirrors have an integrated convex spotter mirror built intothe upper outboard corner of the outside mirrors. They are designed toassist the driver by increasing visibility along the side of the vehicle. Formore information on your side view mirrors, refer to Exterior mi...

DRIVING THROUGH WATER If driving through deep or standingwater is unavoidable, proceed veryslowly. Never drive through waterthat is higher than the bottom ofthe wheel rims (for cars) or thebottom of the hubs (for trucks). When driving through water, traction or brake capability may be limited.Also, ...

ROADSIDE ASSISTANCE Vehicles sold in the U.S. : Getting roadside assistance To fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program. Thisprogram is separate from the New Vehicle Limited Warranty. The serviceis available: • 24-hours,...

Vehicles sold in the U.S. : Using roadside assistance Complete the roadside assistance identification card and place it in yourwallet for quick reference. This card is found in the Owner’s Guideportfolio in the glove compartment. U.S. Ford vehicle customers who require Roadside Assistance, call1-800...

FUEL PUMP SHUT-OFF In the event of a moderate to severe collision, this vehicle is equippedwith a fuel pump shut-off feature that stops the flow of fuel to theengine. Not every impact will cause a shut-off. Should your vehicle shut off after a collision due to this feature, you mayrestart your vehic...

Standard fuse amperage rating and color COLOR Fuse rating Mini fuses Standard fuses Maxi fuses Cartridge maxi fuses Fuse link cartridge 2A Grey Grey — — — 3A Violet Violet — — — 4A Pink Pink — — — 5A Tan Tan — — — 7.5A Brown Brown — — — 10A Red Red — — — 15A Blue Blue — — — 20A Yellow Yellow Yellow ...

Fuse/Relay Location Fuse Amp Rating Protected circuits F42 — Not used F43 — Not used F44 — Not used F45 — Not used F46 — Not used R1 Power relay Rear 15 relay (2/88) R2 — Not used R3 — Not used R4 — Not used R5 — Not used R6 — Not used Passenger compartment fuse panel The fuse panel is located on th...

Fuse/Relay Location Fuse Amp Rating Protected circuits F44 — Not used F45 — Not used F46 25A* Power windows front (without DCU) F47 7.5A* Heated mirror (without DCU) F48 5A* Power exterior mirror (without DCU) R1 — Not used R2 Micro relay Horn R3 — Not used R4 — Not used R5 Micro relay Rear Wiper R6...

tire with a road tire as soon as possible. During repairing or replacing ofthe flat tire, have the authorized dealer inspect the TPMS sensor fordamage. WARNING: The use of tire sealants may damage your tire pressure monitoring system (TPMS) and should not be used. However, if you must use a sealant,...

• Use snow chains on the end of the vehicle with the dissimilar sparetire • Use more than one dissimilar spare tire at a time • Use commercial car washing equipment • Try to repair the dissimilar spare tire Use of one of the dissimilar spare tires listed above at any one wheellocation can lead to im...

• Driving vehicles with a load on the cargo rack Drive cautiously when using a full-size dissimilar spare tire/wheel andseek service as soon as possible. Stopping and securing the vehicle 1. Park on a level surface, set theparking brake and activate thehazard flashers. 2. Place the gearshift lever i...

Tire change procedure WARNING: When one of the front wheels is off the ground, the transmission alone will not prevent the vehicle from moving or slipping off the jack, even if the vehicle is in P (Park) (automatictransmission) or R (Reverse) (manual transmission). WARNING: To help prevent the vehic...

WHEEL LUG NUT TORQUE SPECIFICATIONS Retighten the lug nuts to the specified torque within 100 miles (160 km)after any wheel disturbance (tire rotation, changing a flat tire, wheelremoval, etc.). Bolt size Wheel lug nut torque* ft-lb N • m M12 x 1.5 100 135 * Torque specifications are for nut and bol...

JUMP STARTING WARNING: The gases around the battery can explode if exposed to flames, sparks, or lit cigarettes. An explosion could result in injury or vehicle damage. WARNING: Batteries contain sulfuric acid which can burn skin, eyes and clothing, if contacted. Do not attempt to push-start your aut...

Connecting the jumper cables Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. 1. Connect the positive (+) jumpercable to the positive (+) terminal ofthe discharged battery. 2. Connect the other end of thepositive (+) cable to the positive(+)...

Removing the jumper cables Remove the jumper cables in the reverse order that they wereconnected. Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. 1. Remove the jumper cable fromthe ground metal surface. 2. Remove the jumper cable on thenega...

WRECKER TOWING If you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, yourroadside assistance service provider. It is recommended that your vehicle be towed with a wheel lift or flatbedequipment. Do not tow with a slingb...

Emergency towing In case of a roadside emergency with a disabled vehicle (without accessto wheel dollies, car hauling trailer, or flatbed transport vehicle) yourvehicle (regardless of transmission powertrain configuration) can be flattowed (all wheels on the ground) under the following conditions: •...

GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorizeddealer. While any authorized dealer handling your vehicle line willprovide warranty service, we recommend you return to your sellingauthorized dealer who wants to ensure your continued satisfaction. Plea...

In Canada: Mailing address Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E4 Telephone 1-800-565-3673 (FORD) Online www.ford.ca Additional assistance If you have questions or concerns, or are unsatisfied with the service youare receiving, follow ...

UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY) For vehicles delivered to authorized Canadian dealers. In those caseswhere you continue to feel that the efforts by Ford of Canada and theauthorized dealer to resolve a factory-related vehicle service concernhave been unsatisfactory, Ford of C...

WASHING THE EXTERIOR Wash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft 威 Detail Wash (ZC-3-A), which is available from your authorized dealer. • Never use strong household detergents or soap, such as dish washingor laundry liquid. These products can ...

ENGINE Engines are more efficient when they are clean because grease and dirtbuildup keep the engine warmer than normal.When washing: • Take care when using a power washer to clean the engine. Thehigh-pressure fluid could penetrate the sealed parts and cause damage. • Do not spray a hot engine with ...

WINDOWS AND WIPER BLADES The windshield, rear and side windows and the wiper blades should becleaned regularly. If the wipers do not wipe properly, substances on thevehicle’s glass or the wiper blades may be the cause. These may includehot wax treatments used by commercial car washes, water repellen...

• If a ring forms on the fabric after spot cleaning, clean the entire areaimmediately (but do not oversaturate) or the ring will set. • Do not use household cleaning products or glass cleaners, which canstain and discolor the fabric and affect the flame retardant abilities ofthe seat materials. WARN...

FORD AND LINCOLN CAR CARE PRODUCTS Your Ford or Lincoln authorized dealer has many quality productsavailable to clean your vehicle and protect its finishes. These qualityproducts have been specifically engineered to fulfill your automotiveneeds; they are custom designed to complement the style andap...

SERVICE RECOMMENDATIONS To help you service your vehicle, we provide scheduled maintenance information which makes tracking routine service easy. If your vehicle requires professional service, your authorized dealer canprovide the necessary parts and service. Check your Warranty Guide to find out wh...

Working with the engine on 1. For vehicles equipped with an automatic transmission, set the parkingbrake and shift to P (Park). For vehicles equipped with a manualtransmission, set the parking brake, press and hold the clutch pedal,place the gearshift in N (Neutral), and release the clutch pedal. 2....

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT (Shown without engine cover, if equipped) 1. Engine coolant reservoir 2. Brake/Clutch fluid reservoir 3. Battery 4. Power distribution box 5. Air filter assembly 6. Engine oil filler cap 7. Engine oil dipstick 8. Windshield washer fluid reservoir 1 2 ...

WINDSHIELD WASHER FLUID Add fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely. Only use a washer fluid that meetsFord specifications. Do not use anyspecial washer fluid such aswindshield water repellent type fluidor bug wash. They may causesque...

CHANGING THE WIPER BLADES The wiper arms can be manually moved when the ignition is off. Thisallows for ease of blade replacement and cleaning under the blades. 1. Turn the ignition off beforeremoving the wiper blade. 2. Pull the wiper blade and armaway from the glass. 3. Squeeze the locking tabs to...

Changing the rear window wiper blade (if equipped) To replace the rear wiper blade: 1. Press the wiper blade against theglass with one hand and hold it. 2. Pull the wiper arm away from thewiper blade to separate. 3. To attach the new wiper to thewiper arm, align the slot (1) andcross pin (2) and fir...

7. Put the dipstick back in and ensure it is fully seated. • If the oil level is within this range, the oil level is acceptable. DO NOT ADD OIL. • If the oil level is below this mark, engine oil must be added to raise the level within thenormal operating range. • If required, add engine oil to the e...

Engine oil and filter recommendations Look for this certificationtrademark. Use SAE 5W-20 engine oil Only use oils certified for gasoline engines by the American PetroleumInstitute (API). An oil with this trademark symbol conforms to thecurrent engine and emission system protection standards and fue...

Resetting the oil life monitoring system 1. Turn the ignition key to the on position. Do not start the engine.For vehicles with push-button start, press and hold the START/STOPbutton for two seconds without pressing the brake pedal. Do not attemptto start the engine. 2. Press both the accelerator an...

It is recommended that the negative battery cable terminal be disconnectedfrom the battery if you plan to store your vehicle for an extended period oftime. This will minimize the discharge of your battery during storage. To ensure proper operation of the battery management system (BMS),any electrica...

When the battery is disconnected or a new battery installed, theautomatic transmission must relearn its adaptive strategy. As a result ofthis, the transmission may shift firmly when first driven. This operation isconsidered normal and will fully update transmission operation to itsoptimum shift feel...

When the engine is cold, check thelevel of the engine coolant in thereservoir. • The engine coolant should be at the FULL COLD level, or within theCOLD FILL or MIN / MAX range as listed on the engine coolantreservoir (depending upon application). • Refer to scheduled maintenance information for serv...

• DO NOT MIX different colors or types of coolant in your vehicle. Make sure the correct coolant is used. Mixing of engine coolants mayharm your engine’s cooling system. The use of an improper coolantmay harm engine and cooling system components and may void thewarranty. Refer to Maintenance product...

Add the proper mixture of coolant and water to the cooling system byfollowing these steps: 1. Before you begin, turn the engine off and let it cool. 2. When the engine is cool, wrap a thick cloth around the coolantpressure relief cap on the coolant reservoir (a translucent plastic bottle).Slowly tur...

Fill your engine coolant reservoir as outlined previously in the Adding engine coolant section. Severe climates If you drive in extremely cold climates: • It may be necessary to increase the coolant concentrationabove 50%. • NEVER increase the coolant concentration above 60%. • A coolant concentrati...

Observe the following guidelines when handling automotive fuel: • Extinguish all smoking materialsand any open flames beforefueling your vehicle. • Always turn off the vehicle beforefueling. • Automotive fuels can be harmfulor fatal if swallowed. Fuels such as gasoline and ethanol are highlytoxic an...

Refueling WARNING: Fuel vapor burns violently and a fuel fire can cause severe injuries. To help avoid injuries to you and others: • Read and follow all the instructions on the pump island; • Turn off your engine when you are refueling; • Do not smoke if you are near fuel or refueling your vehicle; ...

4. After you are done pumping fuel, slowly remove the fuel fillernozzle—allow about five seconds after pumping fuel before removing thefuel filler nozzle. This allows residual fuel to drain back into the fuel tankand not spill onto the vehicle. Note: A fuel spillage concern may occur if overfilling ...

The use of leaded fuel is prohibited by law and could damage yourvehicle. Your vehicle was not designed to use fuel or fuel additives with metalliccompounds, including manganese-based additives. Note: Use of any fuel other than those recommended may cause powertrain damage, a loss of vehicle perform...

Fuel quality Unleaded gasoline engines If you experience starting, rough idle or hesitation driveability problemsduring a cold start, try a different brand of “Regular” unleaded gasoline. FFV engines If you experience starting, rough idle or hesitation driveability problemsduring a cold start, try a...

The amount of usable fuel in the empty reserve varies and shouldnot be relied upon to increase driving range. When refueling yourvehicle after the fuel gauge indicates empty, you might not beable to refuel the full amount of the advertised capacity of thefuel tank due to the empty reserve still pres...

Driving style — good driving and fuel economy habits Give consideration to the lists that follow and you may be able to changea number of variables and improve your fuel economy. Habits • Smooth, moderate operation can yield up to 10% savings in fuel. • Steady speeds without stopping will usually gi...

Conditions • Heavily loading a vehicle or towing a trailer may reduce fuel economyat any speed. • Carrying unnecessary weight may reduce fuel economy (approximately1 mpg [0.4 km/L] is lost for every 400 lb [180 kg] of weight carried). • Adding certain accessories to your vehicle (for example bugdefl...

Allow the vehicle to sit for at least eight hours without starting theengine. Then, start the engine and complete the above driving cycle. Theengine must warm up to its normal operating temperature. Once started,do not turn off the engine until the above driving cycle is complete. Ifthe vehicle is s...

Checking and adding manual transmission fluid (if equipped) 1. Clean the filler plug. 2. Remove the filler plug andinspect the fluid level. 3. Fluid level should be at thebottom of the opening. 4. Add enough fluid through thefiller opening so that the fluid levelis at the bottom of the opening. 5. I...

6. Replace the air filter housing cover and secure the screws. Note: Failure to use the correct air filter element may result in severe engine damage. The customer warranty may be void for any damage tothe engine if the correct air filter element is not used. VEHICLE STORAGE If you plan on storing y...

• With your foot on the brake, shift through all the gears while theengine is running. Fuel system • Fill the fuel tank with high-quality fuel until the first automatic shutoffof the fuel pump nozzle. Note: During extended periods of vehicle storage (30 days or more), fuel may deteriorate due to oxi...

• Check windshield wipers for any deterioration. • Check under the hood for any foreign material that may have collectedduring storage (mice/squirrel nests). • Check the exhaust for any foreign material that may have collectedduring storage. • Check tire pressures and set tire inflation per the Tire...

FORD CUSTOM ACCESSORIES FOR YOUR VEHICLE A wide selection of Ford Custom Accessories are available for yourvehicle through your local Ford or Ford of Canada dealer. These qualityaccessories have been specifically engineered to fulfill your automotiveneeds; they are custom designed to complement the ...

Peace of mind • Keyless entry keypad • Wheel locks • Remote start • GPS tracking and recovery* • Vehicle security systems • Wiper de-icer and debris cleaner* • Bumper mounted parking assist system* *Ford Licensed Accessories (FLA) are warranted by the accessorymanufacturer’s warranty. Ford Licensed ...

FORD ESP EXTENDED SERVICE PLANS (U.S. ONLY) More than 30 million Ford and Lincoln owners have discovered thepowerful protection of Ford ESP. It is the only extended service planbacked by Ford Motor Company, and provides “peace of mind”protection beyond the New Vehicle Limited Warranty coverage. Up t...

FORD ESP EXTENDED SERVICE PLANS (CANADA ONLY) You can get more protection for your vehicle by purchasing a FordExtended Service Plan (ESP). Ford ESP is the only service contractbacked by Ford Motor Company of Canada, Limited. Depending on theplan you purchase, Ford ESP provides benefits such as: • R...

GENERAL MAINTENANCE INFORMATION Why maintain your vehicle? This guide describes the scheduled maintenance required for yourvehicle. Carefully following this schedule helps protect against majorrepair expenses resulting from neglect or inadequate maintenance andmay also help to increase the value of ...

Ford strongly recommends the use of genuine Ford replacement parts.Parts other than Ford, Motorcraft 威 or Ford-authorized remanufactured parts that are used for maintenance replacement or for the service ofcomponents affecting emission control must be equivalent to genuineFord Motor Company parts in...

we stand behind them. Parts installed at your dealership carry anationwide, 12 month/12,000 mile (20,000 km) parts and labor limitedwarranty. Your dealer can give you details. Value shopping for your vehicle’s maintenance needs Your dealership recognizes the competitive landscape of maintenance andl...

Normal Scheduled Maintenance At every oil changeinterval as indicatedby the messagecenter Change engine oil and filter Rotate tires, inspect tire wear and measure treaddepth Perform multi-point inspection (recommended) Inspect automatic transmission fluid level (ifequipped with dipstick); consult de...

Maintenance schedule log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ...

SPECIAL OPERATING CONDITIONS If you operate your vehicle primarily in any of the following conditions, you need to perform additional maintenance as indicated. If you occasionally operate your vehicle under any of these conditions, it is not necessary to perform the additional maintenance. For speci...

Operating in dusty conditions such as unpaved or dusty roads Inspect frequently,service as required Replace cabin air filter (if equipped) Replace engine air filter Every 5,000 miles(8,000 km) Inspect the wheels and related components forabnormal noise, wear, looseness or drag Rotate tires, inspect ...

Special operating condition log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D A...

EXCEPTIONS There are several exceptions to the Normal Schedule. They are listedbelow: Normal vehicle axle maintenance: Rear axles and power take-off (PTO) units with synthetic fluid and light-duty trucks equipped withFord-design axles are lubricated for life; do not check or change fluidunless a lea...

using oils defined by the American Petroleum Institute (API)performance category of API SK or earlier (for example SJ, etc). Edge/MKX AWD only – vehicles operating off-road in sand during highambient temperatures must replace the AWD PTU (All-wheel drivePower Transfer Unit) lube every 20,000 miles (...

911 Assist™ ................................85 A Accessing call history/phonebook during active call ...............68 Accessing your media menufeatures ........................................95 Accessing your phone menufeatures ........................................71 Accessory delay ..............

fold away .................................143heated ......................................142side view mirrors (power) .....142signal .......................................142 Moon roof ..................................146 Motorcraft 威 parts ..............333, 367 MyFord™ system ....................