Ford 2012 Focus v.1- Manuals

Warning symbols on your vehicle When you see this symbol, it isimperative that you consult therelevant section of this guide beforetouching or attempting adjustmentof any kind. Protecting the environment We must all play our part inprotecting the environment. Correctvehicle usage and the authorizedd...

SPECIAL NOTICES New Vehicle Limited Warranty For a detailed description of what is covered and what is not covered byyour vehicle’s New Vehicle Limited Warranty, refer to the Warranty Guide that is provided to you along with your Owner’s Guide. Special instructions For your added safety, your vehicl...

WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that you use extreme caution when using any device or feature that may takeyour focus off the road. Your primary responsibility is the safeoperation of your vehicle.We recommend aga...

These are some of the symbols you may see on your vehicle. Vehicle Symbol Glossary Safety Alert See Owner’s Guide Fasten Safety Belt Airbag - Front Airbag - Side Child Seat LowerAnchor Child Seat TetherAnchor Brake System Anti-Lock Brake System Parking Brake System Brake Fluid -Non-Petroleum Based P...

WARNING LIGHTS AND CHIMES Instrument cluster with standard measure shown; metric similar Warning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause expensive repairs. A warning light mayilluminate when a problem exists with one of your vehicle’s functions.M...

Solid illumination after the engine is started indicates the on-boarddiagnostics system (OBD-II) has detected a malfunction. Refer to On-board diagnostics (OBD-II) in the Maintenance and Specifications chapter. If the light is blinking, engine misfire is occurring which coulddamage your catalytic co...

Anti-lock brake system: If the ABS light stays illuminated orcontinues to flash, a malfunction hasbeen detected. Contact yourauthorized dealer as soon aspossible. Normal braking is still functional unless the brake warning lightalso is illuminated. Airbag readiness: If this light fails to illuminate...

AdvanceTrac 威 off light: Illuminates whenAdvanceTrac 威 /Traction control has been disabled by the driver. Refer tothe Driving chapter for more information. Low tire pressure warning: Illuminates when your tire pressureis low. If the light remains on atstart up or while driving, the tirepressure shou...

GAUGES Base cluster shown in standard measure; uplevel cluster andmetric similar. 1. Tachometer: Indicates the engine speed in revolutions per minute. Driving with your tachometer pointer continuously at the top of the scalemay damage the engine. 2. Multifunction display: This is used to configure d...

Odometer : The odometer is displayed in the cluster and registers the total accumulated distance the vehicle has traveled. Trip odometer: Registers the distance of individual journeys. • Standard instrument cluster: Press the reset stem once to switch from the odometer to trip odometer . To reset th...

Trip 1 and 2 Trip odometer — shows the accumulated trip distance. Displayed inthe lower line denoted by a 1: or 2:. Trip timer — shows the elapsed trip time. This timer will stop whenthe vehicle is turned off and will restart when the vehicle is restarted. Distance to empty — shows the approximate d...

Use the left steering wheel controlsto navigate through the messagecenter. Press the up/down arrow buttons tomove up/down through the messagecenter choices. Press the left/right arrow buttons tomove left/right through the messagecenter choices. Press the OK button to selecthighlighted options and co...

Trip 1 and 2 Average fueleconomy —shows theaverage distancetraveled per unitof fuel used for agiven trip. Ford EcoMode(Bettereconomy isdisplayed bymore solidpedals in theflower graphic) Anticipation Speed Shifting (manual transmissiononly) OK = More AnticipationSmooth DrivingSaves Fuel Speed Current...

Note: Some items are optional and may not appear. Settings Driver Assist Traction Ctrl On or Off Hill Start On or Off Rear Park Aid On or Off Lighting Rain Light On or Off Dimming Automatic or Manual Hdlamp delay Manual or xx Seconds Display Nav. info Always off, On guidance orAlways on Language Cho...

Settings (cont’d) MyKey Create Hold OK to Create MyKey Traction Ctrl Always On or User Selectable Max Speed 80 MPH (130 km/h) or Off Speed Warning 45 mph (75 km/h), 55 mph(90 km/h), 65 mph (105 km/h) orOff Volume Limiter Clear MyKeys Hold OK to Clear MyKeys System Reset Hold OK to Reset System to Fa...

• Some messages will reappear after clearing or being reset if a problemor condition is still present and needs your attention. • Some messages can be acknowledged and reset by pressing OK. Thisallows you to use the full message center functionality by clearing themessage. : will appear by itself or...

Maintenance Message Action / Description BRAKE FLUID LEVEL LOWSERVICE NOW Red Indicates the brake fluid levelis low and the brake systemshould be inspectedimmediately. Refer to Brake fluid in the Maintenance and Specifications chapter. Contact your authorizeddealer. WASHER FLUID LEVELLOW — Displays ...

MyKey 威 Message Action / Description MYKEY ESC CANNOT BEDEACTIVATED — Displays when a MyKey 威 is active and trying to disableESC. Refer to MyKey 威 in the Locks and Security chapter for more information. Park Aid Message Action / Description PARKING AIDMALFUNCTION SERVICEREQUIRED Amber Displays when ...

Transmission Message Action / Description TRANSMISSIONOVERHEATING STOPSAFELY Red Displays when thetransmission is overheating.Stop the vehicle in a safe spotand allow the transmission tocool before proceeding. If thecondition persists, contactyour authorized dealer forservice. TRANSMISSION NOT INPAR...

Transmission Message Action / Description TRANSMISSION HOTWAIT X MINUTE — Displays when thetransmission is overheating.Stop the vehicle in a safe spotand allow the transmission tocool for the displayed timebefore proceeding. TRANSMISSION HOTWAIT... — Displays when thetransmission is overheating.Stop...

Tire pressure Monitoring System (TPMS) Message Action / Description LOW TIRE PRESSURE Amber Displays when one or moretires on your vehicle have lowtire pressure. Refer to Inflating Your Tires in the Tires, Wheels and Loading chapter. TIRE PRESSUREMONITOR FAULT Amber Displays when the tirepressure mo...

AUDIO SYSTEMS AM/FM single CD/MP3 system (if equipped) WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsi...

• Audio Menu: Scroll to select Audio and then move right to enter the menu. Scroll to select from: • SCV level (if equipped): Scroll to select Speed compensated volume and move right to enter the menu. This featureautomatically adjusts the volume to compensate for speed andwind noise. You can set th...

Stereo icon: If this icon appears in your display, it means your systemis in stereo mode. 11. CD: Press to enter CD mode. (Eject): Press to eject a CD. AM/FM single CD/MP3, satellite radio and SYNC 姞 compatible (if equipped) WARNING: Driving while distracted can result in loss of vehicle control, ac...

• Display Settings: Scroll to select Display Settings and then move right to enter the menu. Select to set the Language of the display orthe Temp. Setting. 4. Sound menu: Press access Treble, Bass, Fade (if equipped) and Balance menu options. Use / to cycle through the various options. When the desi...

11. CD: Press to enter CD mode. Use the soft keys to select from possible on-screen options of play/pause, Rpt (repeat), and Shuff(shuffle). 12. / (Reverse/Fast forward): Press to access the previous/next track. Press and hold for a fast reverse or advance througha track. 13. (Eject): Press to eject...

Auxiliary input jack (Line in, if equipped) WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsibility is t...

Your vehicle may be equipped with aUSB port in the center console. Thisfeature allows you to plug in mediaplaying devices, memory sticks, andalso to charge devices if theysupport this feature. For furtherinformation on this feature, refer tothe SYNC 威 section later in this chapter. Note: If your veh...

CDs with homemade paper(adhesive) labels should not beinserted into the CD player asthe label may peel and cause theCD to become jammed. It isrecommended that homemadeCDs be identified withpermanent felt tip marker ratherthan adhesive labels. Ballpoint pens may damage CDs. Pleasecontact your authori...

SYNC 姞 (IF EQUIPPED) Note: The following SYNC 威 information is to be used in conjunction with the vehicle’s compatible audio systems listed on the previous pages. Thissection is NOT to be used in conjunction with the touchscreen system(MyFord Touch™). If you have the MyFord Touch™ system, please ref...

EXPORT UNIQUE (NON-UNITED STATES/CANADA) INFORMATION For your particular global region, your vehicle may be equipped withfeatures and options that are different from the features and options thatare described in this supplement. Added benefits SYNC 威 even has some benefits which extend beyond your c...

• “Vehicle Health Report” (if equipped, U.S. only): Say to run a health report. • “ Services” (if equipped, U.S. only): Say to access the SYNC Services portal. System interaction and feedback The system provides feedback through audible tones, prompts, questionsand spoken confirmations depending on ...

For example, “Say 1 after the tone to call John Doe at home. Say 2after the tone to call Johnny Doe on mobile. Say 3 after the toneto call Jane Doe at home.” Or, “Say 1 after the tone to play JohnDoe, Say 2 after the tone to play Johnny Doe. Helpful Hints • Ensure that the interior of the vehicle is...

• Redial • Call waiting notification • Caller ID Other features, such as text messaging via Bluetooth , and automatic phone book download are phone dependent features. To ensure that youhave a compatible cellular phone, refer to your phone’s user manual andvisit www.SyncMyRide.com or www.syncmaroute...

Pairing subsequent phones Once you have a phone paired with the system, the steps to pair anotherphone is a bit different. To pair a subsequent phone: Note: To scroll through the menus, press / . 1. Ensure that the vehicle ignition and radio are turned on and thatyou are in P (Park). 2. Press PHONE ...

At any time, you can say the following global commands: • SYNC • USB • Line in • Bluetooth Audio • Phone • Voice settings • Cancel • Vehicle Health Report (if equipped, U.S. only) • Services (if equipped, U.S. only) • Help Making a call To make a call, press and when prompted say: • “Call <name&g...

Phone options during an active call During an active call, you have additional menu features which becomeavailable such as putting a call on hold, joining calls, etc. Scrolling through the menus: Use / to scroll through the menu options. To access: 1. Press MENU during an active call to enter the Ac...

1. Press OK to select and then scroll until the desired numberappears in the display and press OK. 2. A tone will sound as confirmation. Repeat as necessary. Join Calls : Allows you to join two separate calls and speak to both through SYNC. 1. Press or PHONE to put your first call on hold. 2. Access...

+ Denotes submenus with additional menu items Scrolling through the menus: Use / to scroll through the menu options. PHONE or Phone Redial Call History OK Phone book Text Message OK Phone Settings OK Services 911 Assist Vehicle Health Report OK User Preferences + Applications System Settings OK Exit...

Accessing features through the phone menu SYNC’s phone menu allows you to redial a number, access your callhistory and phone book and send text messages as well as accessingphone and system settings. You can also access advanced features suchas 911 Assist™, Vehicle Health Report and SYNC Services. T...

Text messaging SYNC allows you to receive, send, download and delete text messages.The system will even read incoming text messages to you so that you donot have to take your eyes off the road. Note: This is a phone dependent feature. Receiving a text message Note: This is a phone dependent feature....

3. Scroll to select from the following options: Send Text Message? : Enables you to send a new text message based on a predefined set of 15 messages. 1. Press OK to select. If the system detects your phone does notsupport this feature, Unsupported will appear in the display and SYNC will return you ...

Modify Phonebook : Allows you to modify the contents of your phone book (i.e. add, delete, download). Press OK to select and scroll to cycle through the followingoptions: • Add Contacts : Press OK to add more contacts from your phone book. ’Push’ the desired contact(s) on your phone. Refer toyour ph...

Bluetooth Device menu options This menu allows you to add, connect, delete, set a phone as primary, aswell as turn Bluetooth on and off. To access: 1. Press PHONE or to enter the Phone Menu . 2. Scroll until System Settings appears and press OK. 3. Scroll until Bluetooth Devices appears and select O...

Set As Primary Phone? : Select to set a previously paired phone as your primary phone. SYNC will attempt to connect with the primaryphone at every ignition cycle. • Press OK to select and scroll to select the desired phone. Press OK to confirm. Note: When a phone is selected as primary, it will appe...

2. Scroll repeatedly until Services appears in the display. 3. Press OK to confirm and enter the Services menu. The display willindicate the system is connecting. 4. Press OK. SYNC 威 will initiate the call to the services portal. 5. Once connected, follow the voice prompts to request your desiredSer...

Identification Number). Thus, you can use your SYNC TDI Service withany vehicle equipped with Traffic, Directions and Information. Simplypair and connect your phone to any vehicle equipped with Traffic,Directions and Information and continue enjoying your personalizedservices. Note: The driver is ul...

• A connected Bluetooth enabled cellular phone that has adequate network coverage, battery power and signal strength. • The vehicle is located in the U.S. or Canada or in a territory in which911 is the emergency number. WARNING: Unless 911 Assist™ is previously configured to ON prior to a crash, 911...

• Mileage Intervals: Press OK. Scroll to select between 5,000, 7,500 or 10,000 mile intervals and press OK to make yourselection. • Return: Press OK to exit the menu. • Run Report: Press OK for SYNC to run a health report of your vehicle’s diagnostic systems and send the results to Ford where itwill...

Media voice commands Press and when prompted, say, “USB” . You may then say any of the following: • Play all • Play • Pause • What’s playing? • Play next track • Play previous track • Play Song <name> • Search song <name> • Refine song <name> • Similar music • Play next folder 2 • ...

Note: You can only play genres of music which are present in the GENRE metadata tags that you have on your digital media player. Similar music: You can tell the system to play music ‘similar’ to what you are currently playing from the USB port. SYNC 威 will use the metadata information of each indexe...

+ Denotes submenus with additional menu items Scrolling through the menus: Press / to scroll through the menu options. AUX MENU Media Menu Play Menu OK Select Source OK Media Settings OK Application System Settings OK Exit Media Menu Play All Artists Albums Genres Playlists Tracks Explore USB Simila...

Accessing the features of your media menu SYNC’s media menu allows you to select which source you would like tolisten to, how you would like to play your music (by artist, genre, shuffle,repeat, etc.), and also if you need to add, connect or delete devices. To access your media menu: 1. Press AUX an...

Media Settings : Allows you to choose to shuffle or repeat your music in addition to setting your Autoplay settings. Press OK to select and thenscroll to choose from: • Shuffle : Press OK to shuffle available media files in the current playlist. Note: To shuffle all media tracks, you must select Pla...

• Press OK to select. The first track title will appear in the display. Artists : Allows you to sort all indexed media by artist. Once selected, the system will list and then play all artists and tracks alphabetically. Ifthere are less than 255 indexed artist, they will be listed alphabetically infl...

Explore USB: Allows you to explore through all supported digital media on your media device connected to the USB port. Note: When exploring, you will only be able to view media content which is compatible withSYNC. You may have other files saved with various extensions, but theywill not be visible. ...

Troubleshooting Your SYNC 威 system is easy to use. However, should questions arise, please refer to the tables below as well as the Helpful Hints section that follows. Use the website at any time to check your phone’s compatibility, registeryour account and set preferences as well as access a custom...

Vehicle Health Report/Services (Traffic, Directions and Information) issues Issue Possible Cause(s) Possible Solution(s) I heard acommercial whenI tried to useTraffic, Directionsand Information. • The phone in use is notactivated. • Your phone has ID blocker active. • This is a free feature, but you...

• Single EULA: The end user documentation for the DEVICE and related systems and services may contain multiple EULAs, such asmultiple translations and/or multiple media versions (e.g., in the userdocumentation and in the software). Even if you receive multipleEULAs, you are licensed to use only one ...

• Internet-Based Services Components: The SOFTWARE may contain components that enable and facilitate the use of certainInternet-based services. You acknowledge and agree that MS, MicrosoftCorporation, FORD MOTOR COMPANY, third party software andservice suppliers, their affiliates and/or their design...

PRODUCT SUPPORT: Product support for the SOFTWARE is not provided by MS, its parent corporation Microsoft Corporation, or theiraffiliates or subsidiaries. For product support, please refer to FORDMOTOR COMPANY instructions provided in the documentation for theDEVICE. Should you have any questions co...

WARNING: Operating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or other serious consequences. Do not changesystem settings or enter data non-verbally (using your hands) whiledriving. Stop the vehicle in a safe and legal ma...

SINGLE ZONE MANUAL SYSTEM (IF EQUIPPED) Temperature conversion: To switch between Fahrenheit and Celsius, refer to the Message Center section of the Instrument Cluster chapter. 1. (Fan speed adjustment): Turn to select the desired fan speed. 2. (Recirculated air): Press to activate/deactivate air re...

5. Multifunction control: Turn to manually choose one of the following air distribution modes: • (Panel): Distributes air through the instrument panel vents. • (Floor and Panel): Distributes air through the instrument panel vents, demister vents, floor vents and rear seat floor vents. • (Floor): Dis...

During extreme high ambient temperatures when idling stationary forextended periods of time in gear, it is recommended to run the A/C inthe MAX A/C position, reduce blower fan speed from the highest settingand put the vehicle’s transmission into the P (Park) gear position(automatic transmission only...

DUAL AUTOMATIC TEMPERATURE CONTROL (DATC) SYSTEM(IF EQUIPPED) Temperature conversion: To switch between Fahrenheit and Celsius: Press MENU > Display Settings > Temp. Setting. If your vehicle isequipped with the touchscreen system, press Menu > Settings > System> Temperature. 1. (Power...

• Remove any snow, ice or leaves from the air intake area at the base ofthe windshield. • To improve the A/C cool down, drive with the windows slightly openfor 2–3 minutes after starting the vehicle or until the vehicle has“aired out.” • A small amount of air may be felt from the floor vent regardle...

REAR WINDOW DEFROSTER R The rear defroster control is located on the climate control panel andworks to clear the rear window of fog and thin ice. The engine must be running to operate the rear window defroster. Press R to turn the rear window defroster on. An indicator light on the control will illu...

HEADLAMP CONTROL Turns the lamps off. Turns on the parking lamps, instrument panel lamps,license plate lamps and tail lamps. Turns the headlamps on. Note: The head lamp indicator will illuminate when the head lamps are activated. Autolamp control (if equipped) The autolamp system provides lightsensi...

Fog lamp control (if equipped) The fog lamps can be turned onwhen the headlamp control is in the , , or positions and the high beams are not turnedon. • Press the fog lamp control,located on the instrument panel,to activate the fog lamps. • Press the fog lamp control againto deactivate the fog lamps...

WARNING: Always remember to turn on your headlamps at dusk or during inclement weather. The Daytime Running Lamp (DRL) system does not activate the tail lamps and generally may notprovide adequate lighting during these conditions. Failure to activateyour headlamps under these conditions may result i...

• Tap the left control to dim allinterior lit componentsincrementally, or • Press and hold the left controluntil the desired lighting level isreached. Note: If the battery is disconnected, discharged, or a new battery is installed, the dimmer will set the illuminated components to themaximum setting...

On the wall or screen you willobserve a flat zone of high intensitylight located at the top of the righthand portion of the beam pattern. Ifthe top edge of the high intensitylight zone is not at the horizontalreference line, the headlamp willneed to be adjusted. 4. Locate the vertical adjuster oneac...

Ambient lighting (if equipped) Illuminates several areas (footwells,cupholder and doors ) with a choiceof several colors. The ambientlighting control switch is located inthe overhead console. • To activate, rotate the controlknob past the first detent andadjust to the desired brightness. • Use the l...

Replacing headlamp bulbs 1. Make sure the headlamp controlis in the off position and open thehood. 2. Remove the two screw from theheadlamp assembly. 3. Carefully pull the headlampassembly up and away from thevehicle. Low beam headlamp: • Remove service cap anddisconnect the electricalconnector. • R...

WINDSHIELD WIPERS Move the lever down for a singlewipe. Move the control up one position for intermittent operation.Adjust the rotary control to thedesired speed. Move the control up two positionsfor normal operation or three positions for high-speed wiping. Rain-sensing wipers (if equipped) The rai...

level frequently. Do not operate the wipers when the windshield is dry.This may scratch the glass, damage the wiper blades and cause the wipermotor to burn out. Before operating the wiper on a dry windshield,always use the windshield washer. In freezing weather, be sure the wiperblades are not froze...

WARNING: Never adjust the steering wheel when the vehicle is moving. ILLUMINATED VISOR MIRROR (IF EQUIPPED) Lift the mirror cover to turn on thevisor mirror lamp. CENTER CONSOLE Your vehicle has a variety of console features. These include: • Cupholders • Utility compartment • Auxiliary AV connectio...

To prevent the fuse from being blown, do not use the power point(s)over the vehicle capacity of 12V DC/180W. If the power point or cigarlighter socket is not working, a fuse may have blown. Refer to Fuses and relays in the Roadside Emergencies chapter for information on checking and replacing fuses....

2. Lift the switch again for one more second. 3. Press and hold the switch until the window is fully open, then releasethe switch. 4. Lift and hold the switch until the window is fully closed. 5. Open the window and try to close it automatically. 6. Reset and repeat procedure if the window does not ...

Do not block the sensors on the front and back of the interiorrear view mirror since this may impair proper mirrorperformance.Note: A rear center passenger and/or raised rear center headrest (if equipped) may also block the light from reaching the sensor. Do not clean the housing or glass of any mir...

Fold-away mirrors Fold the side mirrors in carefullywhen driving through a narrowspace, like an automatic car wash. Blind spot mirrors Your vehicle is equipped with blind spot mirrors. Refer to Blind spot mirrors in the Driving chapter. SPEED CONTROL (IF EQUIPPED) With speed control set, you can mai...

Turning off speed control To turn off the speed control, press and release OFF or turn off theignition. Note: When you turn off the speed control or the ignition, your speed control set speed memory is erased. STEERING WHEEL CONTROLS (IF EQUIPPED) Audio control features (if equipped) Press the arrow...

UNIVERSAL GARAGE DOOR OPENER (IF EQUIPPED) Your vehicle may be equipped with a universal garage door opener whichcan be used to replace the common hand-held transmitter. HomeLink 姞 Wireless Control System (if equipped) The HomeLink 威 Wireless Control System, located on the driver’s visor,provides a ...

1. Position the end of yourhand-held transmitter 1–3 inches(2–8 cm) away from the HomeLink 威 button you wish to program (locatedon your visor) while keeping theindicator light in view. 2. Simultaneously press and holdboth the chosen HomeLink 威 and hand-held transmitter buttons until the HomeLink 威 i...

Gate Operator & Canadian Programming During programming, yourhand-held transmitter mayautomatically stop transmitting —not allowing enough time forHomeLink 威 to accept the signal from the hand-held transmitter. After completing Step 1 outlined inthe Programming section, replace Step 2 with the f...

Erasing HomeLink 姞 buttons To erase the three programmedbuttons (individual buttons cannotbe erased): • Press and hold the two outerHomeLink 威 buttons until the indicator light begins toflash-after 20 seconds. Releaseboth buttons. Do not hold forlonger that 30 seconds. HomeLink 威 is now in the train...

POSITIVE RETENTION FLOOR MAT WARNING: Do not install additional floor mats on top of the factory installed floor mats as they may interfere with the accelerator or the brake pedals. Position the floor mat so that theeyelets are over the retention postsand press down to lock in. Makesure that the mat...

KEYS Integrated keyhead transmitters (IKTs) (If equipped) Your vehicle may be equipped withtwo integrated keyhead transmitters(IKTs). The key blade starts thevehicle and unlocks/locks all thedoors. The transmitter portionfunctions as the remote entrytransmitter. Your IKTs are programmed to yourvehic...

Intelligent Access Key (IA key) (if equipped) Your vehicle may be equipped withtwo intelligent access keys whichoperate the power locks and theremote entry system. You have tohave the IA key in the vehicle toactivate the push button startsystem. The IA key also contains aremovable mechanical key bla...

admin keys are programmed to the vehicle, and see the total distancethe vehicle has been driven with the MyKey 威 active. MyKey 威 restricted features Standard settings – these settings cannot be changed • Belt-Minder 威 cannot be cleared and will not expire. The audio system will be muted whenever Bel...

Refer to Message center in the Instrument Cluster chapter for vehicle information displays. Using MyKey 威 with remote start systems MyKey 威 is not compatible with non-Ford approved aftermarket remote start systems. If you choose to install a remote start system please seeyour authorized dealer for a...

POWER DOOR LOCKS The power door lock control islocated on the instrument panelnear the radio. Press the control to lock/unlock thedoors. When the light on the buttonis on it indicates that all doors andthe luggage compartment arelocked. When the light is off itindicates one or more doors are unlocke...

If a door is unlocked, the autolock feature will repeat when the vehicleslows below 4 mph (7 km/h) and then attains a speed greater than4 mph (7 km/h). Autounlock feature When autounlock is activated, all doors will unlock when the driver dooris opened. Deactivating/activating autolock/autounlock Th...

REMOTE ENTRY SYSTEM (IF EQUIPPED) FCC ID: LXP-RX4318 IC: 2298A-RX4318 The integrated keyhead transmitters (IKTs) and intelligent access keys(IA key) comply with part 15 of the FCC rules and with RSS-210 ofIndustry Canada. Operation is subject to the following two conditions:(1) This device may not c...

Intelligent access (if equipped) Your intelligent access system uses a radio frequency (RF) signal tocommunicate with your vehicle and authorize your vehicle to unlockwhen commanded (either by touching the inside of any exterior doorhandle, the luggage compartment handle, or a button on the transmit...

Two-stage unlocking may be disabled or enabled by simultaneouslypressing the and controls on the transmitter for four seconds (disabling two stage unlock allows all vehicle doors to unlocksimultaneously). The turn signal lamps will illuminate twice to indicatethat two-stage unlock was enabled or dis...

Replacing lost remote entry transmitters Replacing lost integrated keyhead transmitters (IKTs) If you would like to have your integrated keyhead transmittersreprogrammed because you lost one, or would like to buy additionalIKTs, you can either reprogram them yourself, or take all IKTs to yourauthori...

• If the dome lamps were turned on using the panel dimmer control, thebattery saver will shut them off 10 minutes after the ignition has beenturned off. • If the courtesy lamps were turned on because one of the vehicle doorsor the trunk was opened, the battery saver will shut them off10 minutes afte...

Programming spare integrated keyhead transmitter (IKT) keys If you have intelligent access keys, refer to Programming spare intelligent access keys in this section. You can program your own integrated keyhead transmitters or standardSecuriLock 威 coded keys to your vehicle. This procedure will progra...

If the key was not successfully programmed, it will not start yourvehicle’s engine and/or will not operate the remote entry features. Themessage center will display: NO KEY DETECTED. Wait 10 seconds andyou may repeat Steps 1 through 8. If failure repeats, bring your vehicleto your authorized dealer ...

Disarming the system You can disarm the system by any of the following actions: • Unlock the doors by pressing the control on your remote entry transmitter. • Turn the ignition on or start the vehicle. • If using a key in the driver’s door to unlock the vehicle, a chime willsound when you open the d...

FRONT SEATS WARNING: Reclining the seatback can cause an occupant to slide under the seat’s safety belt, resulting in severe personal injuries in the event of a collision. WARNING: Do not pile cargo higher than the seatbacks to reduce the risk of injury in a collision or sudden stop. WARNING: Before...

WARNING: To minimize the risk of neck injury in the event of a crash, head restraints must be installed properly. Adjusting the front manual seats WARNING: Never adjust the driver’s seat or seatback when the vehicle is moving. WARNING: Sitting improperly out of position or with the seat back recline...

• Up-down seat adjustment (driver’s side only) Pull up on the control to raise theseat and push down on the controlto lower the seat. • Recline adjustment Lift the control to adjust the angleof the seatback. WARNING: Reclining the seatback can cause an occupant to slide under the seat’s safety belt,...

Adjusting the front power seat (if equipped) WARNING: Never adjust the driver’s seat or seatback when the vehicle is moving. WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing s...

To operate the heated seats, turn the thumbwheel to the desired heatsetting 0–5: • Setting 0 is off, 1 is the lowestheat setting and setting 5 is thehighest. REAR SEATS Second row head restraints Outboard seat positions Your vehicle is equipped with removable outboard head restraints. WARNING: To mi...

Center seat position Your vehicle is equipped with a second row center head restraint that isvertically adjustable and removable. The adjustable center head restraintconsists of: • a trimmed energy absorbing foamand structure (1), • two steel stems (2), • a guide sleeve adjust/releasebutton (3), • a...

WARNING: Air bags can kill or injure a child in a child seat. NEVER place a rear-facing child seat in front of an active air bag. If you must use a forward-facing child seat in the front seat, movethe seat all the way back. WARNING: Always transport children 12 years old and under in a rear seating ...

response to the occupant’s forward momentum. This helps reduce therisk of force-related injuries to the occupant’s chest by limiting the loadon the occupant. Determining if the Personal Safety System is operational The Personal Safety System uses a warning light in the instrumentcluster, a warning m...

WARNING: All occupants of the vehicle, including the driver, should always properly wear their safety belts, even when an air bag supplemental restraint system (SRS) is provided. WARNING: It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding...

Safety belt locking modes All safety restraints in the vehicle are combination lap and shoulderbelts. The driver safety belt has the first locking mode and the frontoutboard passenger and rear seat safety belts have both types of lockingmodes described as follows: Vehicle sensitive mode This is the ...

Front safety belt height adjustment Adjust the height of the shoulderbelt so the belt rests across themiddle of your shoulder. To adjust the shoulder belt height,squeeze the button and slide theheight adjuster up or down. Releasethe button and pull down on theheight adjuster to make sure it islocked...

If... Then... The driver’s or frontpassenger’s safety belt becomesunbuckled for approximatelyone minute while the vehicle istraveling at least 6 mph(9.7 km/h) and more than1-2 minutes have elapsed sincethe ignition switch has beenturned to on... The Belt-Minder 威 feature is activated - the safety be...

AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) The supplemental restraint system is designed to work with the safetybelt to help protect the driver and right front passenger from certainupper body injuries. WARNING: Airbags DO NOT inflate slowly or gently, and the risk of injury from a deploying airbag ...

Children and airbags Children must always be properlyrestrained. Accident statisticssuggest that children are safer whenproperly restrained in the rearseating positions than in the frontseating position. Failure to followthese instructions may increase therisk of injury in a collision. WARNING: Airb...

The airbags inflate and deflaterapidly upon activation. After airbagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burnt propellant. This mayconsist of cornstarch, talcumpowder (to lubricate the bag) orsodium compounds (e.g., bakingsoda) that result from thecombustion pr...

In case there is a problem with thefront passenger sensing system, theairbag readiness lamp in theinstrument cluster will stay lit. If the airbag readiness lamp is lit, do the following: The driver and/or adult passengers should check for any objects thatmay be lodged underneath the front passenger ...

How does the side airbag system work? The design and development of the side airbag system includedrecommended testing procedures that were developed by a group ofautomotive safety experts known as the Side Airbag Technical WorkingGroup. These recommended testing procedures help reduce the risk ofin...

WARNING: If the side air curtain has deployed, the air curtain will not functionagain. The side air curtainsystem (including the A, B andC pillar trim and headliner)must be inspected and servicedby an authorized dealer. If the air curtain is not replaced, theunrepaired area will increase therisk of ...

SAFETY RESTRAINTS FOR CHILDREN See the following sections for directions on how to properly use safetyrestraints for children. Also see Airbag supplemental restraint system (SRS) in this chapter for special instructions about using airbags. Important child restraint precautions WARNING: Always make ...

Recommendations for Safety Restraints for Children Child size, height, weight, orage Recommendedrestraint type Infants ortoddlers Children weighing 40 lb (18 kg) orless (generally age four oryounger) Use a child safetyseat (sometimescalled an infantcarrier, convertibleseat, or toddler seat). Smallch...

Recommendations for attaching child safety restraints for children RestraintType Child Weight Use any attachment method as indicated below by “X” LATCH(loweranchorsandtoptetheranchor) LATCH(loweranchorsonly) Safetybeltandtoptetheranchor Safetybelt andLATCH(loweranchorsand toptetheranchor) Safetybelt...

WARNING: Never let a passenger hold a child on his or her lap while the vehicle is moving. The passenger cannot protect the child from injury in a collision, which may result in serious injury ordeath. WARNING: Never use pillows, books, or towels to boost a child. They can slide around and increase ...

Follow all the safety restraint and airbag precautions that apply to adultpassengers in your vehicle. If the child is the proper height, age, and weight (as specified by yourchild safety seat or booster manufacturer), fits the restraint and can berestrained properly, then restrain the child in the c...

Use of inboard lower anchors from the outboard seating positions(center seating use) The lower anchors at the center of the second row rear seat are spaced18 inches (450 mm) apart. The standardized spacing for LATCH loweranchors is 11 inches (280 mm) center to center. A child seat with rigidLATCH at...

2. Locate the correct anchor for theselected seating position. 3. Clip the tether strap to theanchor as shown. If the tether strap is clippedincorrectly, the child safety seat maynot be retained properly in theevent of a collision. 4. Tighten the child safety seat tether strap according to themanufa...

Children and booster seats vary in size and shape. Choose a booster thatkeeps the lap belt low and snug across the hips, never up across thestomach, and lets you adjust the shoulder belt to cross the chest andrest snugly near the center of the shoulder. The drawings below comparethe ideal fit (cente...

Follow all instructions provided by the manufacturer of the booster seat. WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the riskof injury or death in a collis...

IMPORTANT INFORMATION FOR 235/40R18 LOW-PROFILE TIRESAND WHEELS If your vehicle is equipped with 235/40R18 tires, they are low-profiletires. These tires and wheels are designed to give your vehicle a sportappearance. With low-profile tires, you may notice an increase in roadnoise and faster tire wea...

Treadwear The treadwear grade is a comparative rating based on the wear rate ofthe tire when tested under controlled conditions on a specifiedgovernment test course. For example, a tire graded 150 would wear oneand one-half (1 1 ⁄ 2 ) times as well on the government course as a tire graded 100. The ...

Every day before you drive, check your tires. If one looks lower than theothers, use a tire gauge to check pressure of all tires and adjust ifrequired. At least once a month and before long trips, inspect each tire and checkthe tire pressure with a tire gauge (including spare, if equipped). Inflatea...

WARNING: Age Tires degrade over time depending on many factors such as weather, storage conditions, and conditions of use (load, speed,inflation pressure, etc.) the tires experience throughout their lives.In general, tires should be replaced after six years regardless of treadwear. However, heat cau...

It is recommended that the two front tires or two rear tires generally bereplaced as a pair. The tire pressure sensors mounted in the wheels (originally installed onyour vehicle) are not designed to be used in aftermarket wheels. The use of wheels or tires not recommended by Ford Motor Companymay af...

Tire and wheel alignment A bad jolt from hitting a curb or pothole can cause the front end of yourvehicle to become misaligned or cause damage to your tires. If yourvehicle seems to pull to one side when you’re driving, the wheels may beout of alignment. Have an authorized dealer check the wheel ali...

7. H: Indicates the tire’s speed rating. The speed rating denotes the speed at which a tire is designed to be driven for extended periods oftime under a standard condition of load and inflation pressure. The tireson your vehicle may operate at different conditions for load and inflationpressure. The...

Additional information contained on the tire sidewall for “LT” typetires “LT” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below. Note: Tire Quality Grades do not apply to this type of tire. 1. LT: Indicates a tire, designated by the Tire a...

Information on “T” type tires “T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below: T145/80D16 is an example of a tiresize. Note: The temporary tire size for your vehicle may be different fromthis example. Tire Quality Grades donot apply ...

The tire pressure monitoring system complies with part 15 of the FCCrules and with RSS-210 of Industry Canada. Operation is subject to thefollowing two conditions: (1) This device may not cause harmfulinterference, and (2) This device must accept any interference received,including interference that...

Understanding your tire pressure monitoring system (TPMS) The tire pressure monitoring system measures pressure in your four roadtires and sends the tire pressure readings to your vehicle. The low tirepressure warning light will turn on if the tire pressure is significantly low.Once the light is ill...

When you believe your system is not operating properly The main function of the tire pressure monitoring system is to warn youwhen your tires need air. It can also warn you in the event the system isno longer capable of functioning as intended. Please refer to thefollowing chart for information conc...

Low tire pressurewarning light Possible cause Customer action required Flashing warninglight Spare tire in use Your temporary spare tire is in use. Repair the damaged roadwheel and re-mount it on thevehicle to restore systemfunctionality. For a descriptionof how the system functionsunder these condi...

SNOW TIRES AND CHAINS WARNING: Snow tires must be the same size, load index, speed rating as those originally provided by Ford. Use of any tire or wheel not recommended by Ford can affect the safety andperformance of your vehicle, which could result in an increased risk ofloss of vehicle control, ve...

SUMMER TIRES Your Ford vehicle may be equipped with summer tires to providesuperior performance on wet and dry roads. Summer tires do not havethe Mud and Snow (M+S or M/S) tire traction rating on the tire sidewall. Since summer tires do not have the same traction performance asAll-season or Snow tir...

Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Label on the B-Pillar or the edge of the driver’s door(vehicles exported outside the US and Canada may not have a TireLabel). Look for “THE COMBINED WEI...

Example only: Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all payload. Tires, Wheels and Loading 251 2012 Focus (foc) O...

GAWR (Gross Axle Weight Rating) – is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Safety Compliance Certification Labellocated on the B-Pillar or the edge of the driver’s door. The totalload on each axle must never exceed its GAWR....

WARNING: Do not use replacement tires with lower load carrying capacities than the original tires because they may lower the vehicle’s GVWR and GAWR limitations. Replacement tireswith a higher limit than the original tires do not increase the GVWRand GAWR limitations. WARNING: Exceeding any vehicle ...

• A final example for your vehicle with 1400 lb. (635 kg) of cargo andluggage capacity. You and one of your friends decide to pick upcement from the local home improvement store to finish that patioyou have been planning for the past 2 years. Measuring the inside ofthe vehicle with the rear seat fol...

Before you tow your vehicle, follow these directions for your specificvehicle configuration after it is hooked-up to the RV or tow dolly: Vehicles with a manual transmission: 1. Release the parking brake. 2. Move the gearshift to the neutral position. 3. The maximum towing speed is 70 mph (113 km/h)...

STARTING Positions of the ignition If your vehicle is equipped with a push button start system, refer to Push button start system in this section for ignition modes. 1. 0 (off) — locks the automatictransmission gearshift lever andallows key removal. This positionalso shuts the engine and allelectric...

Starting the engine Note: If your vehicle is equipped with a push button start system, refer to Push button start system in this section for starting. 1. Turn the key to II (on) withoutturning the key to III (start). 2. Turn the key to III (start), thenrelease the key as soon as theengine begins cra...

Ignition modes 1. Off — press and release the START/STOP button without applying thebrake pedal (automatic transmission) or clutch pedal (manualtransmission) when your vehicle is in on mode or when the engine isrunning. Note: In order to switch off the engine while the vehicle is in motion, press an...

Backup method of starting: Your IA key uses a radio frequency signalto communicate with your vehicleand authorize your vehicle to startwhen you press the START/STOPbutton and apply the brake pedal orclutch pedal. If excessive radiofrequency interference is present inthe area, or if the battery in yo...

vehicle may have taken the IA key when exiting the vehicle. If the IA keyis no longer present in the vehicle, you will not be able to re-start yourvehicle outside of the Fast Restart time (see Fast Restart Feature above). It is important to be aware of where your IA key is located in thevehicle, to ...

outdoors, in cold temperatures, and is clearly marked “Suitable for Usewith Outdoor Appliances.” Never use an indoor extension cordoutdoors; it could result in an electric shock or fire hazard. • Use a 16-gauge outdoor extension cord, minimum. • Use as short an extension cord as possible. • Do not u...

Make sure system is unplugged and properly stowed before driving thevehicle. While not in use, make sure the protective cover seals theprongs of the engine block heater cord plug. BRAKES Occasional brake noise is normal. If a metal-to-metal, continuous grindingor continuous squeal sound is present, ...

Brake assist The brake assist system provides full braking force during panic brakingsituations. It detects a rapid application of the brake pedal and uses theABS system to achieve maximum braking pressure. Once a panic brakeapplication is detected, the system will remain activated as long as thebra...

Certain adverse driving maneuvers may activate the ESC system, whichinclude but are not limited to: • Taking a turn too fast • Maneuvering quickly to avoid an accident, pedestrian or obstacle • Driving over a patch of ice or other slippery surfaces • Changing lanes on a snow-rutted road • Entering a...

WARNING: The EPS has diagnostics checks that continuously monitor the EPS to ensure proper operation of the electronic system. When an electronic error is detected, the message STEERINGASSIST FAULT SERVICE REQUIRED will be displayed in the messagecenter. If this happens, stop the vehicle in a safe p...

AUTOMATIC TRANSMISSION OPERATION (IF EQUIPPED) Understanding the gearshift positions of the 6–speed automatictransmission (if equipped) P (Park) This position locks the transmissionand prevents the front wheels fromturning. To put your vehicle in gear: • Press the brake pedal • Move the gearshift le...

L (Low) This position: • Provides maximum engine braking. • Will downshift to the lowest available gear for the current vehiclespeed; allows for first gear when vehicle reaches slower speeds. • Is not intended for use under extended or normal driving conditionsand results in lower fuel economy. Unde...

Hill start assist (HSA) system (if equipped) The hill start assist (HSA) system makes it easier to pull away when thevehicle is on a slope without the need to use the parking brake. WhenHSA is active, the vehicle will remain stationary on the slope for two tothree seconds after you release the brake...

2. Press the clutch pedal to thefloor, then put the gearshift lever inthe neutral position. 3. Start the engine. 4. Press the brake pedal and movethe gearshift lever to the desiredgear; 1 (First) or R (Reverse). 5. Release the parking brake, then slowly release the clutch pedal whileslowly pressing ...

Do not downshift into 1 (First) when your vehicle is movingfaster than 15 mph (24 km/h). This will damage the clutch. Upshift according to the following chart: Recommended upshifts (for best fuel economy) when accelerating 5-speed manual transmission Shift from: 1 - 2 14 mph (23 km/h) 2 - 3 24 mph (...

FORWARD AND REVERSE SENSING SYSTEMS (IF EQUIPPED) The forward and reverse sensing system will warn the driver of obstacleswithin a certain range of the front and rear bumpers. The front sensors will be activewhen the gearshift is in any positionother than P (Park) or N (Neutral)and the vehicle speed...

If the vehicle is equipped with aforward and reverse sensing system,the driver can disable the entiresystem (front and rear sensors) bypressing the parking aid off switchlocated on the lower portion of thecenter console. The message center will indicate afailure in the forward or reversesystem and w...

The rear video camera includes the following features that will assist thedriver in reverse driving. Active guidelines, fixed guidelines and centerline The active guidelines show the path of intended motion of the vehiclewhile reversing. The fixed guidelines assist a driver with backing into aparkin...

Active guidelines project the intended path of the vehicle. Fixedguidelines show the actual direction the vehicle is moving. The fixed andactive guidelines will fade in and out depending on the steering wheelposition. When the steering wheel position is straight, the activeguidelines will not be sho...

When manual zoom is enabled, onlythe centerline will be shown. Rear camera delay After shifting out of R (Reverse) and into any gear other than P (Park),the image will remain until the vehicle speed reaches five mph (8 km/h).This will only occur if the rear camera delay feature is on, or until anyra...

WARNING: The rearview camera system is a reverse aid supplement device that still requires the driver to use it in conjunction with the rearview mirror and the side mirrors formaximum coverage. WARNING: Objects that are close to either corner of the bumper or under the bumper, might not be seen on t...

Servicing • If the image comes on while the vehicle is not in R (Reverse), havethe system inspected by your authorized dealer. • If the image is not clear, check if anything is covering the lens such asdirt, mud, ice, snow, etc. If the image is still not clear after cleaning,have your system inspect...

For best performance, drive the vehicle as parallel as possible whilepassing a parking space. If driven too fast (above 18 mph [30 km/h]) forthe system to measure parking spaces, the information display will showa corresponding message. When the system has found a space, the information display will...

When you determine the vehicle is back far enough, bring the vehicle toa complete stop and move the gearshift to D (Drive). When you determine the vehicle is far enough forward, bring the vehicleto a complete stop and move the gearshift to R (Reverse). Follow theinformation display instructions. The...

• You may be driving in R (Reverse). APA can only look for a parkingspace while moving forward. • There may be an irregular curb along the parking space. APA mightnot be able to align the vehicle to curbs that are damaged, veryshallow or covered with material such as debris, leaves, snow, or tarps. ...

Driving with blind spot mirrors Before a lane change, check themain mirror first, then check theblind spot mirror. If no vehicles arepresent in the blind spot mirror andthe traffic in the adjacent lane is ata safe distance, signal that you aregoing to change lanes. Glance overyour shoulder to verify...

DRIVING THROUGH WATER If driving through deep or standingwater is unavoidable, proceed veryslowly especially when the depth isnot known. Never drive throughwater that is higher than the bottomof the wheel rims (for cars) or thebottom of the hubs (for trucks). When driving through water, traction or ...

ROADSIDE ASSISTANCE Vehicles sold in the U.S. : Getting roadside assistance To fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program. Thisprogram is separate from the New Vehicle Limited Warranty. The serviceis available: • 24-hours,...

U.S. Ford and Lincoln vehicle customers who require RoadsideAssistance, call 1-800-241-3673. If you need to arrange roadside assistance for yourself, Ford MotorCompany will reimburse a reasonable amount for towing to the nearestdealership within 35 miles (56 km). To obtain reimbursementinformation, ...

Should your vehicle shut off after a collision due to this feature, you mayrestart your vehicle by doing the following: 1. Turn the ignition switch to the off position. 2. Turn the ignition switch to the on position. In some instances the vehicle may not restart the first time you try torestart and ...

COLOR Fuse rating Mini fuses Standard fuses Maxi fuses Cartridge maxi fuses Fuse link cartridge 20A Yellow Yellow Yellow Blue Blue 25A Natural Natural — Natural Natural 30A Green Green Green Pink Pink 40A — — Orange Green Green 50A — — Red Red Red 60A — — Blue Yellow Yellow 70A — — Tan — Brown 80A —...

Fuse/Relay Location Fuse Amp Rating Protected circuits F31 — Not used F32 — Not used F33 — Not used F34 15A Driver seat heater F35 15A Passenger seat heater F36 — Not used F37 5A Sunroof F38 — Not used F39 — Not used F40 — Not used F41 — Not used F42 — Not used F43 — Not used F44 — Not used F45 — No...

CHANGING THE TIRES If you get a flat tire while driving, do not apply the brake heavily.Instead, gradually decrease your speed. Hold the steering wheel firmlyand slowly move to a safe place on the side of the road. Note: The tire pressure monitoring system (TPMS) indicator light will illuminate when...

The usage of a full-size dissimilar spare tire/wheel can lead toimpairment of the following: • Handling, stability and braking performance • Comfort and noise • Ground clearance and parking at curbs • Winter weather driving capability • Wet weather driving capability • All-wheel driving capability (...

Removing the spare tire and jack 1. Remove the carpeted wheel cover 2. Remove the wing nut/boltassembly that secures the spare tireand jack by turning itcounterclockwise. 3. Remove the lug wrench and jackfrom the foam holder. Tire change procedure WARNING: When one of the front wheels is off the gro...

WARNING: To lessen the risk of personal injury, do not put any part of your body under the vehicle while changing a tire. Do not start the engine when your vehicle is on the jack. The jack is onlymeant for changing the tire. 4. Remove the lug nuts with the lug wrench. 5. Replace the flat tire with t...

WARNING: When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum orbrake disc that contacts the wheel. Ensure that any fasteners thatattach the rotor to the hub are secured so they do ...

Preparing your vehicle When the battery is disconnected or a new battery is installed, theautomatic transmission must relearn its shift strategy. As a result, thetransmission may have firm and/or soft shifts. This operation isconsidered normal and will not affect function or durability of thetransmi...

1. Connect the positive (+) jumpercable to the positive (+) terminal ofthe discharged battery. 2. Connect the other end of thepositive (+) cable to the positive(+) terminal of the assisting battery. 3. Connect the negative (-) cable tothe negative (-) terminal of theassisting battery. 4. Make the fi...

Removing the jumper cables Remove the jumper cables in the reverse order that they wereconnected. Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. 1. Remove the jumper cable fromthe ground metal surface. 2. Remove the jumper cable on thenega...

WRECKER TOWING If you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, yourroadside assistance service provider. It is recommended that your vehicle be towed with a wheel lift or flatbedequipment. Do not tow with a slingb...

Emergency towing In case of a roadside emergency with a disabled vehicle (without accessto wheel dollies, car hauling trailer, or flatbed transport vehicle) yourvehicle (regardless of transmission powertrain configuration) can be flattowed (all wheels on the ground) under the following conditions: •...

GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorizeddealer. While any authorized dealer handling your vehicle line willprovide warranty service, we recommend you return to your sellingauthorized dealer who wants to ensure your continued satisfaction. Plea...

In Canada: Mailing address (Ford vehicles) Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E4 Telephone 1-800-565-3673 (FORD) Online www.ford.ca Mailing address (Lincoln vehicles) Lincoln CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oak...

You can get more information by calling BBB AUTO LINE at1-800-955-5100, or writing to: BBB AUTO LINE4200 Wilson Boulevard, Suite 800Arlington, Virginia 22203–1833 BBB AUTO LINE applications can also be requested by calling the FordMotor Company Customer Relationship Center at 1-800-392-3673. Note: F...

GETTING ASSISTANCE OUTSIDE THE U.S. AND CANADA Before exporting your vehicle to a foreign country, contact theappropriate foreign embassy or consulate. These officials can inform youof local vehicle registration regulations and where to find unleaded fuel. If you cannot find unleaded fuel or can onl...

If your vehicle must be serviced while you are traveling or living in theMiddle East, contact the nearest authorized dealer. If the authorizeddealer cannot help you, contact: Ford Middle EastCustomer Relationship CenterP.O. Box 21470Dubai, United Arab EmiratesTelephone: +971 4 3326084Toll-Free Numbe...

Obtaining a French Owner’s Guide French Owner’s Guides can be obtained from your authorized dealer orby contacting Helm, Incorporated using the contact information listedpreviously in this section. REPORTING SAFETY DEFECTS (U.S. ONLY) If you believe that your vehicle hasa defect which could cause a ...

WASHING THE EXTERIOR Wash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft 威 Detail Wash (ZC-3-A), which is available from your authorized dealer. • Never use strong household detergents or soap, such as dish washingor laundry liquid. These products can ...

WINDOWS AND WIPER BLADES The windshield, rear and side windows and the wiper blades should becleaned regularly. If the wipers do not wipe properly, substances on thevehicle’s glass or the wiper blades may be the cause. These may includehot wax treatments used by commercial car washes, water repellen...

• If a ring forms on the fabric after spot cleaning, clean the entire areaimmediately (but do not oversaturate) or the ring will set. • Do not use household cleaning products or glass cleaners, which canstain and discolor the fabric and affect the flame retardant abilities ofthe seat materials. WARN...

FORD AND LINCOLN CAR CARE PRODUCTS Your Ford or Lincoln authorized dealer has many quality productsavailable to clean your vehicle and protect its finishes. These qualityproducts have been specifically engineered to fulfill your automotiveneeds; they are custom designed to complement the style andap...

SERVICE RECOMMENDATIONS To help you service your vehicle, we provide scheduled maintenance information which makes tracking routine service easy. If your vehicle requires professional service, your authorized dealer canprovide the necessary parts and service. Check your Warranty Guide to find out wh...

Working with the engine on 1. For vehicles equipped with an automatic transmission, set the parkingbrake and shift to P (Park). For vehicles equipped with a manualtransmission, set the parking brake, press and hold the clutch pedal,place the gearshift in N (Neutral), and release the clutch pedal. 2....

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT (Shown without engine cover, if equipped) 1. Engine coolant reservoir 2. Brake/Clutch fluid reservoir 3. Battery 4. Power distribution box 5. Air filter assembly 6. Engine oil filler cap 7. Engine oil dipstick 8. Windshield washer fluid reservoir 1 2 ...

WINDSHIELD WASHER FLUID Add fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely. Only use a washer fluid that meetsFord specifications. Do not use anyspecial washer fluid such aswindshield water repellent type fluidor bug wash. They may causesque...

CHANGING THE WIPER BLADES 1. Pull the wiper blade and armaway from the glass. 2. Squeeze the locking tabs torelease the blade from the arm andpull the blade away from the arm toremove it. 3. Attach the new blade to the arm and snap it into place. Replace wiper blades at least once per year for optim...

7. Put the dipstick back in and ensure it is fully seated. • If the oil level is within this range, the oil level is acceptable. DO NOT ADD OIL. • If the oil level is below this mark, engine oil must be added to raise the level within thenormal operating range. • If required, add engine oil to the e...

Engine oil and filter recommendations Look for this certificationtrademark. Use SAE 5W-20 engine oil Only use oils certified for gasoline engines by the American PetroleumInstitute (API). An oil with this trademark symbol conforms to thecurrent engine and emission system protection standards and fue...

2. Press both the accelerator and brake pedals at the same time. 3. Keep both pedals fully pressed. 4. After three seconds, the Service: Oil reset in prog. message will be displayed. 5. After 25 seconds, the Service: Oil reset complete message will be displayed. 6. Release both the accelerator and b...

To ensure proper operation of the battery management system (BMS),any electrical devices that are added to the vehicle should not have theirground connection made directly at the negative battery post. Aconnection at the negative battery post can cause inaccuratemeasurements of the battery condition...

When the battery is disconnected or a new battery installed, theautomatic transmission must relearn its adaptive strategy. As a result ofthis, the transmission may shift firmly when first driven. This operation isconsidered normal and will fully update transmission operation to itsoptimum shift feel...

When the engine is cold, check thelevel of the engine coolant in thereservoir. • The engine coolant should be at the FULL COLD level, or within theCOLD FILL or MIN / MAX range as listed on the engine coolantreservoir (depending upon application). • Refer to scheduled maintenance information for serv...

• DO NOT MIX different colors or types of coolant in your vehicle. Make sure the correct coolant is used. DO NOT MIX recycled coolant and new (unused) coolant together in the vehicle. Mixing of enginecoolants may harm your engine’s cooling system. The use of animproper coolant may harm engine and co...

3. Step back while the pressure releases. 4. When you are sure that all the pressure has been released, use thecloth to turn it counterclockwise and remove the cap. 5. Fill the coolant reservoir slowly with the proper coolant mixture, towithin the COLD FILL RANGE or the FULL COLD level on the reserv...

Severe climates If you drive in extremely cold climates: • It may be necessary to increase the coolant concentrationabove 50%. • NEVER increase the coolant concentration above 60%. • A coolant concentration of 60% will provide improved freezepoint protection. Increased engine coolant concentrationsa...

Observe the following guidelines when handling automotive fuel: • Extinguish all smoking materialsand any open flames beforefueling your vehicle. • Always turn off the vehicle beforefueling. • Automotive fuels can be harmfulor fatal if swallowed. Fuels such as gasoline and ethanol are highlytoxic an...

Refueling WARNING: Fuel vapor burns violently and a fuel fire can cause severe injuries. To help avoid injuries to you and others: • Read and follow all the instructions on the pump island; • Turn off your engine when you are refueling; • Do not smoke if you are near fuel or refueling your vehicle; ...

4. After you are done pumping fuel, slowly remove the fuel fillernozzle—allow about five seconds after pumping fuel before removing thefuel filler nozzle. This allows residual fuel to drain back into the fuel tankand not spill onto the vehicle. Note: A fuel spillage concern may occur if overfilling ...

The use of leaded fuel is prohibited by law and could damage yourvehicle. Your vehicle was not designed to use fuel or fuel additives with metalliccompounds, including manganese-based additives. Note: Use of any fuel other than those recommended may cause powertrain damage, a loss of vehicle perform...

Fuel quality Unleaded gasoline engines If you experience starting, rough idle or hesitation driveability problemsduring a cold start, try a different brand of “Regular” unleaded gasoline. FFV engines If you experience starting, rough idle or hesitation driveability problemsduring a cold start, try a...

The amount of usable fuel in the empty reserve varies and shouldnot be relied upon to increase driving range. When refueling yourvehicle after the fuel gauge indicates empty, you might not beable to refuel the full amount of the advertised capacity of thefuel tank due to the empty reserve still pres...

• Adding certain accessories to your vehicle (for example bugdeflectors, rollbars/light bars, running boards, ski/luggage racks) mayreduce fuel economy. • Using fuel blended with alcohol may lower fuel economy. • Fuel economy may decrease with lower temperatures during the first8–10 miles (12–16 km)...

Allow the vehicle to sit for at least eight hours without starting theengine. Then, start the engine and complete the above driving cycle. Theengine must warm up to its normal operating temperature. Once started,do not turn off the engine until the above driving cycle is complete. Ifthe vehicle is s...

Checking and adding manual transmission fluid (if equipped) 1. Clean the filler plug. 2. Remove the filler plug andinspect the fluid level. 3. Fluid level should be at thebottom of the opening. 4. Add enough fluid through thefiller opening so that the fluid levelis at the bottom of the opening. 5. I...

6. Replace the air filter housing cover and secure the screws. Note: Failure to use the correct air filter element may result in severe engine damage. The customer warranty may be void for any damage tothe engine if the correct air filter element is not used. VEHICLE STORAGE If you plan on storing y...

• With your foot on the brake, shift through all the gears while theengine is running. Fuel system • Fill the fuel tank with high-quality fuel until the first automatic shutoffof the fuel pump nozzle. Note: During extended periods of vehicle storage (30 days or more), fuel may deteriorate due to oxi...

• Check windshield wipers for any deterioration. • Check under the hood for any foreign material that may have collectedduring storage (mice/squirrel nests). • Check the exhaust for any foreign material that may have collectedduring storage. • Check tire pressures and set tire inflation per the Tire...

FORD CUSTOM ACCESSORIES FOR YOUR VEHICLE A wide selection of Ford Custom Accessories are available for yourvehicle through your local Ford or Ford of Canada dealer. These qualityaccessories have been specifically engineered to fulfill your automotiveneeds; they are custom designed to complement the ...

Peace of mind • Keyless entry keypad • Wheel locks • Remote start • GPS tracking and recovery* • Vehicle security systems • Wiper de-icer and debris cleaner* • Bumper mounted parking assist system* *Ford Licensed Accessories (FLA) are warranted by the accessorymanufacturer’s warranty. Ford Licensed ...

FORD ESP EXTENDED SERVICE PLANS (U.S. ONLY) More than 30 million Ford and Lincoln owners have discovered thepowerful protection of Ford ESP. It is the only extended service planbacked by Ford Motor Company, and provides “peace of mind”protection beyond the New Vehicle Limited Warranty coverage. Up t...

FORD ESP EXTENDED SERVICE PLANS (CANADA ONLY) You can get more protection for your vehicle by purchasing a FordExtended Service Plan (ESP). Ford ESP is the only service contractbacked by Ford Motor Company of Canada, Limited. Depending on theplan you purchase, Ford ESP provides benefits such as: • R...

GENERAL MAINTENANCE INFORMATION Why maintain your vehicle? This guide describes the scheduled maintenance required for yourvehicle. Carefully following this schedule helps protect against majorrepair expenses resulting from neglect or inadequate maintenance andmay also help to increase the value of ...

components affecting emission control must be equivalent to genuineFord Motor Company parts in performance and durability. It is theowner’s responsibility to determine the equivalency of such parts. Pleaseconsult your Warranty Guide for complete warranty information. Chemicals or additives not appro...

nationwide, 12 month/12,000 mile (20,000 km) parts and labor limitedwarranty. Your dealer can give you details. Value shopping for your vehicle’s maintenance needs Your dealership recognizes the competitive landscape of maintenance andlight repair automotive services. With factory-trained technician...

Normal Scheduled Maintenance At every oil changeinterval as indicatedby the messagecenter Change engine oil and filter Rotate tires, inspect tire wear and measure treaddepth Perform multi-point inspection (recommended) Inspect automatic transmission fluid level (ifequipped with dipstick); consult de...

Maintenance schedule log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ...

SPECIAL OPERATING CONDITIONS If you operate your vehicle primarily in any of the following conditions, you need to perform additional maintenance as indicated. If you occasionally operate your vehicle under any of these conditions, it is not necessary to perform the additional maintenance. For speci...

Operating in dusty conditions such as unpaved or dusty roads Inspect frequently,service as required Replace cabin air filter (if equipped) Replace engine air filter Every 5,000 miles(8,000 km) Inspect the wheels and related components forabnormal noise, wear, looseness or drag Rotate tires, inspect ...

Special operating condition log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D A...

EXCEPTIONS There are several exceptions to the Normal Schedule. They are listed below: Normal vehicle axle maintenance: Rear axles and power take-off (PTO) units with synthetic fluid and light-duty trucks equipped withFord-design axles are lubricated for life; do not check or change fluidunless a le...

Edge/MKX AWD only – vehicles operating off-road in sand during highambient temperatures must replace the AWD PTU (All-wheel drivePower Transfer Unit) lube every 20,000 miles (32,000 km). Engine air filter & cabin air filter replacement: Engine air filter and cabin air filter life is dependent on...

911 Assist™ ................................83 A Accessing call history/phonebook during active call ...............68 Accessing your media menufeatures ........................................93 Accessing your phone menufeatures ........................................71 Accessory delay ..............

fold away .................................141heated ......................................140side view mirrors (power) .....140signal .......................................140 Moon roof ..................................144 Motorcraft 威 parts ..............334, 368 MyFord™ system ....................