Ford 2012 Explorer v.1- Manuals

Warning symbols on your vehicle When you see this symbol, it isimperative that you consult therelevant section of this guide beforetouching or attempting adjustmentof any kind. Protecting the environment We must all play our part inprotecting the environment. Correctvehicle usage and the authorizedd...

Your vehicle is not equipped with the Ford Ambulance PreparationPackage. DATA RECORDING Service Data Recording Service data recorders in your vehicle are capable of collecting andstoring diagnostic information about your vehicle. This potentiallyincludes information about the performance or status o...

not want Ford or its vendors to receive this information, do notactivate the service. Ford Motor Company and the vendors it usesto provide you with this information do not store your vehicletravel information. For more information, see Traffic, Directionsand Information, Terms and Conditions. See yo...

These are some of the symbols you may see on your vehicle. Vehicle Symbol Glossary Safety Alert See Owner’s Guide Fasten Safety Belt Airbag - Front Airbag - Side Child Seat LowerAnchor Child Seat TetherAnchor Brake System Anti-Lock Brake System Parking Brake System Brake Fluid -Non-Petroleum Based P...

WARNING LIGHTS AND CHIMES Base instrument cluster with standard measure shown; metricsimilar Optional instrument cluster with standard measure shown; metricsimilar Warning lights can alert you to a vehicle condition that may becomeserious enough to cause extensive repairs. A warning light mayillumin...

Brake system warning light: To confirm the brake system warninglight is functional, it willmomentarily illuminate when theignition is turned to the on positionwhen the engine is not running, or in a position between on and start, orby applying the parking brake when the ignition is turned to the onp...

Liftgate ajar (RTT): Displays when the ignition is in the onposition and the trunk is open. Low washer fluid (RTT): Illuminates when the windshieldwasher fluid is low. Turn signal: Illuminates when the left or right turn signal or thehazard lights are turned on. If theindicators flash faster, check ...

Hill descent (RTT) (ifequipped): Illuminates when hill descent is turned on. Heads up display (if equipped): A red beam of lights will illuminateon the windshield in certaininstances when using adaptivecruise control and/or the collisionwarning system. It will alsoilluminate momentarily when you sta...

GAUGES Base cluster shown in standard measure – metric similar 1. Tachometer: Indicates the engine speed in revolutions per minute. Driving with your tachometer pointer continuously at the top of the scalemay damage the engine. 2. Multifunction display: This displays the engine coolant temperature, ...

Optional clusterShown in standard measure. Metric similar. 1. Multifunction display: This displays the fuel gauge, tachometer, engine coolant temperature, odometer/trip meter and other vehiclefeatures. This is also used to configure different vehicle personalizationoptions and display the status of ...

Main menu Scroll up/down to highlight one of the options, then press the right arrowkey or OK to enter into that menu option. Press the left arrow key asneeded to exit back to the main menu. *Trip 1 or 2 Trip Odometer – shows the accumulated trip distance. Trip Timer – shows the elapsed trip time. T...

*Settings (cont’d) Convenience (cont’d) Easy Entry/Exit Locks Autolock Autounlock Remote Unlock All Doors or DriverFirst Oil life Reset Set 10-100% Power Liftgate Switch Enabled or Disabled Remote Start Climate Control Heater – A/C Auto or LastSetting Climate Control Front Defrost Auto or Off Climat...

To change the Menu Control between Standard or Memory On, refer to Vehicle and Menu Control found in the table under the Settings section later in this chapter. Display Mode Press the right arrow on the left steering wheel mounted button whendisplay mode is selected. The boxes in the upper right cor...

Standard trip display • Trip distance — shows theaccumulated trip distance • Elapsed trip time — timer stopswhen the vehicle is turned offand restarts when the vehicle isrestarted. Enhanced trip display • Trip distance — shows theaccumulated trip distance • Average fuel economy — showsthe average fu...

It is important to reset fuel economy after setting the speed control toget accurate highway fuel economy readings. For more information refer to Essentials of good fuel economy in the Maintenance and Specifications chapter. Settings/Vehicle Settings In this mode, you can configure different driver ...

Units Distance Miles & Gal / Km & Liters Temperature Fahrenheit (°F) / Celsius (°C) Restore defaults Hold OK to Restore Settings to Factory Defaults Information In this mode, you can view different vehicle system information andperform a system check.When Press OK for info is displayed, pres...

System warnings and status messages See System warning and status messages later in this chapter for more information. SYSTEM WARNINGS AND STATUS MESSAGES System warnings alert you to possible problems or malfunctions in yourvehicle’s operating systems. Note: Depending on the vehicle options equippe...

Battery and Charging System Messages Action / Description TRANSPORT MODECONTACT DEALER Contact your authorized dealer as soon aspossible. FACTORY MODECONTACT DEALER Contact your authorized dealer as soon aspossible. LOW BATTERYFEATURESTEMPORARILYTURNED OFF Displayed when the battery managementsystem...

Maintenance Messages Action / Description LOW ENGINE OILPRESSURE Stop the vehicle as soon as safely possible,turn off the engine. Check the oil level. See Checking the engine oil in the Maintenance and Specifications chapter. If the warning stays on or continues to come on with yourengine running, c...

Terrain Management / Off Road / Hill Descent Action / Description MODE CHANGENOT ACCEPTED,RETRY Displayed when terrain management modecannot be changed at time of driver request. TERRAINMANAGEMENTSYSTEM FAULT Displays when the terrain management systemdetects an error. Tire Messages Action / Descrip...

MYFORD™ SYSTEM (IF EQUIPPED) WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsibility is the safeoperatio...

Auxiliary input jack (line in) WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsibility is the safeoperat...

Phone PHONE: If your vehicle is equipped with this audio system and SYNC 威 , press PHONE to access SYNC phone features. Refer to your SYNC 威 supplement for more information.If your vehicle is not equipped with SYNC 威 , press PHONE to mute the playing media. Press again to return to the playing media...

SINGLE ZONE MANUAL SYSTEM WITH REAR CLIMATECONTROLS (IF EQUIPPED) Temperature conversion: To switch between Fahrenheit and Celsius: Press MENU > Display Settings > Temp. Setting, or refer to Settings in the Message Center section of the Instrument Cluster chapter. 1. (Fan speed adjustment): Tu...

• : Distributes air through the instrument panel vents. • : Distributes air through the instrument panel vents, demister vents, floor vents and rear seat floor vents. • : Distributes air through the demister vents, floor vents and rear seat floor vents. 6. A/C: Press to activate/deactivate air condi...

Operating tips • To reduce fog build-up on the windshield during humid weather,select (defrost) or (floor/defrost). • To reduce humidity build-up inside the vehicle, do not drive with thesystem off or with (recirculated air) engaged and A/C off. • Do not put objects under the front seats that will i...

AUTOMATIC TEMPERATURE CONTROL SYSTEMS Dual Automatic Temperature Control (DATC) Sony system(if equipped) Note: Your climate control system is touch sensitive. You need only lightly touch the control graphic to activate the feature. Note: Your vehicle is also equipped with touchscreen climate control...

3. (Recirculated air): Press to activate/deactivate air recirculation in the vehicle. Recirculated air may reduce the amount of time to cooldown the interior of the vehicle and may also help reduce undesiredodors from reaching the interior of the vehicle. Recirculated air engagesautomatically when M...

any airflow mode except (defrost). Recirculated air may turn off automatically in all airflow modes except MAX A/C to reduce fogpotential. 3. MAX A/C: Distributes recirculated air through the instrument panel vents to cool the vehicle. This re-cooling of the interior air is moreeconomical and effici...

the driver’s temperature to the desired value then touch and hold theMyTemp button for at least two seconds. Any subsequent touch of theMyTemp button will automatically change to this set temperature for thisuser. Operating tips • To reduce fog build-up on the windshield during humid weather,select ...

4. Set the fan speed to the highest setting. 5. Direct the outer instrument panel vents towards the side windows. To increase airflow to the outer instrument panel vents, close the ventslocated in the middle of the instrument panel. Touchscreen features If your vehicle is equipped with a touchscreen...

REMOTE START CLIMATE OPERATION (IF EQUIPPED) The climate control system will condition the cabin temperature duringremote start based on the outside temperature. Engine idle may increaseto help with adjusting the cabin temperature. Note: No climate control adjustments will be recognized during remot...

For cold weather conditions: • The interior cabin will be set to 72°F (22°C). • The heated seats (if equipped and if the feature is selected to AUTOin the message center) will be set to high. • Rear defrost/heated mirrors (if equipped) will be activated. For moderate weather conditions: • The interi...

HEADLAMP CONTROL Turns the lamps off. Turns on the parking lamps, instrument panel lamps,license plate lamps and tail lamps. Turns the headlamps on. Autolamp control (if equipped) The autolamp system provides lightsensitive automatic on-off control ofthe exterior lights normallycontrolled by the hea...

2. Rotate the headlamp control to the autolamp position. 3. Rotate the headlamp control to the off position. 4. Turn the vehicle on. 5. Turn the vehicle off. 6. Turn the headlamp control to the autolamp position (the headlightsshould turn on). 7. Turn the headlamp control to the off position when th...

Flash-to-pass Pull toward you slightly to activateand release to deactivate. Daytime running lamps (DRL) (if equipped) To activate DRL: • the ignition must be in the on position and • the headlamp control is in the or position • the transmission is not in P (Park). WARNING: Always remember to turn o...

Dome lamp control Use to manually turn the dome lampon. • Press the control. This will turnon the interior courtesy lights.The lights will remain on until thecontrol is pressed again. Dome lamp control (with fog lamps) Use to manually turn the dome lampon. • Press the bottom of the control.This will...

5. Locate the vertical adjuster foreach headlamp. Using a Phillips #2screwdriver, turn the adjustercontrol either clockwise (to adjustdown) or counterclockwise (toadjust up). Note: HORIZONTAL AIMING IS NOT REQUIRED FOR THISVEHICLE AND ISNON-ADJUSTABLE. TURN SIGNAL CONTROL The turn signal lever does ...

INTERIOR LAMPS Front row map lamps (if equipped) To turn on the map lamps, press theouter edge of the clear lens. Thefront row map lamp lights when: • any door is opened. • the instrument panel dimmerbutton is pressed until thecourtesy lamp comes on. • the remote entry controls arepressed and the ig...

Third row cargo lamp The dome lamp lights when: • any door is opened. • the instrument panel dimmerbutton is pressed until thecourtesy lamp comes on. • any of the remote entry controlsare pressed and the ignition is off. The courtesy lamp can also beturned on and off manually bypressing the control ...

Replacing interior bulbs Check the operation of the bulbs frequently. To replace any of theinterior bulbs, see a dealer or qualified technician. Replacing exterior bulbs Check the operation of all the bulbs frequently. Replacing headlamp bulbs 1. Make sure that the headlamp control is in the off pos...

5. Pull the bulb straight out of thesocket. Reverse steps to reinstall bulb(s). Replacing sidemarker bulbs 1. Make sure that the headlampcontrol is in the off position. 2. Open the hood. 3. Remove the hood overslambumper tower to service sidemarkerbulb (if needed). Lights 82 2012 Explorer (exp) Owne...

4. Rotate the bulb socketcounterclockwise and remove itfrom the lamp assembly. 5. Pull the bulb straight out of thesocket. Reverse steps to reinstall bulb(s). Replacing turn/backup lamp bulbs The turn/backup lamp bulbs are located in the same area of the tail lampassembly, one below the other. Follo...

WINDSHIELD WIPERS Windshield wiper: Rotate the end of the control away from you toincrease the speed of the wipers;rotate towards you to decrease thespeed of the wipers. Speed dependent wipers (ifequipped): When the wiper control is set to any of the interval settingsexcept the longest pause setting...

Windshield washer: Press the end of the stalk: • briefly: causes the wipers toswipe three times with washerfluid. • a long press and hold: the wipersand washer fluid will be activatedfor up to ten seconds. Mist wipe: Press the stalk down and release for a single swipe of the wipers without washer fl...

For rear wash cycle, rotate (and hold as desired) the rear wiper/washercontrol to either position. From either position, the control will automatically return to the 2 or O(off) position. Reverse wiper feature: The rear wiper will be automatically activated in an intermittent setting when shifting i...

ILLUMINATED VISOR MIRROR (IF EQUIPPED) Lift the mirror cover to turn on thevisor mirror lamp. Slide-on-rod feature Rotate the visor towards the sidewindow and extend it rearward foradditional sunlight coverage. Note: To stow the visor back into the headliner, visor must beretracted before moving it ...

The power outlet is not designed for the following electric appliances;they may not work properly: • Cathode ray tube type televisions • Motor loads, such as vacuum cleaners, electric saws and other electricpower tools, compressor-driven refrigerators, etc. • Measuring devices, which process precise...

Bounce-back When the window is moving upward and an obstacle or a rough roadcondition interferes with the window’s movement, the window willautomatically reverse direction and move down. This is known as“bounce-back”. If the ignition is turned off (without accessory delaybeing active) during bounce-...

Automatic dimming interior rear view mirror (if equipped) The interior rear view mirror has an auto-dimming function. Theelectronic day/night mirror will change from the normal (high reflective)state to the non-glare (darkened) state when bright lights (glare) reachthe mirror. When the mirror detect...

Memory feature (if equipped) The power side view mirror positions are saved when doing a memoryset function and can be recalled along with the vehicle personalityfeatures when a memory position is selected through the remote entrytransmitter, keyless entry keypad or memory switch on the driver’s doo...

Note: 10 or more switch activations within one minute, or repeated folding/unfolding of the mirrors while holding the button down duringfull travel, may cause the system to disable the fold/unfold function toprotect motors from overheating. Should this occur, wait approximatelythree minutes with the...

SPEED CONTROL (IF EQUIPPED) With speed control set, you can maintain a set speed without keepingyour foot on the accelerator pedal. WARNING: Do not use the speed control in heavy traffic or on roads that are winding, slippery or unpaved. Using speed control The speed controls are located on the stee...

Using adaptive cruise control Note: It is the drivers responsibility to stay alert, drive safely and be in control of the vehicle at all times. The controls for using your cruisecontrol are located on the steeringwheel. SET: Press to set a speed or to change the set speed. RES/CNCL (Resume/cancel): ...

Following a vehicle WARNING: When following a vehicle in front of you, the vehicle will not decelerate automatically to a stop, nor will the vehicle always decelerate quickly enough to avoid a collision without driverintervention. Always apply the brakes when necessary. Failing to do somay result in...

Blocked sensor If a message regarding a blockedsensor is displayed, the radar signalsfrom the sensor have beenobstructed. The sensor is locatedbehind a fascia cover near the driverside of the lower grille. When theradar signals are obstructed, avehicle ahead cannot be detectedand the ACC will not fu...

WARNING: Do not use ACC when towing a trailer with brake controls. Aftermarket trailer brakes will not function properly when ACC is activated because the brakes are electronically controlled.Failing to do so may result in loss of vehicle control, which could resultin serious injury. WARNING: Do not...

Navigation/SYNC 威 system hands-free control features (if equipped) Press to active the voice recognition feature. Refer to Voice recognition feature in the MyFord Touch™ / MyLincoln Touch™ supplement. Press to access phone features. Refer to Phone features in the MyFord Touch™ / MyLincolnTouch™ supp...

FCC and RSS-210 Industry Canada Compliance The Car2U 威 system complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2)This device must accept any interference received ...

WARNING (Continued) • Check attachment of floor mats on a regular basis. Always properly reinstall and secure floor mats that have been removed for cleaningor replacement. • Always make sure that objects cannot fall into the driver foot well while the vehicle is moving. Objects that are loose can be...

UTILITY HOOK The utility hook can be used tohang small items such as grocerybags, etc. Do not hang more than10 lb (4.5 kg) on the hook. MANUAL LIFTGATE (IF EQUIPPED) The liftgate area is only intended for cargo, not passengers. To open the liftgate, press thebutton located in the top of theliftgate ...

If the liftgate reverses and starts to close after an open request, a fastcontinuous chime indicates excessive load on the gate or a possible strutfailure. If any excessive load is removed and you still have a fasterchime, have the system serviced immediately by your authorized dealer. Do not attemp...

To power open the liftgate withoutside liftgate control button: 1. Unlock the liftgate with thetransmitter or power door unlockcontrol. If the intelligent accesstransmitter (if equipped) is within3 feet (1 meter) of the liftgate, theliftgate will unlock when you pressthe liftgate release button. 2. ...

The new open liftgate height will now be recalled when the powerliftgate is opened. To change the programmed height, repeat the aboveprocedure. Once the power liftgate is opened it can be manually movedto a different height. Note: Do not drive with the liftgate open without first disabling the power...

2. Slide the crossbar to the desired position. This may require someoneon each side of the crossbar. 3. Tighten the tie-down hooks at both sides of the crossbar by turningclockwise until tight. (A small screwdriver or similar tool can be used totighten the hook an additional half turn.) Be sure to c...

KEYS Integrated keyhead transmitters (IKTs) (if equipped) Your vehicle may be equipped withtwo integrated keyhead transmitters(IKTs). The key blade is used tostart the vehicle and unlock/lock thedriver’s door from outside thevehicle. The transmitter portionfunctions as the remote entrytransmitter. Y...

The IA key also contains aremovable mechanical key bladethat can be used to unlock thedriver door. To release themechanical key blade, slide therelease on the back of thetransmitter and pull the blade out. Your IA keys are programmed toyour vehicle. You cannot enter or start your vehicle with anunpr...

When you open one of the front doors and you lock the vehicle with thepower door lock control (on the driver or passenger door trim panel), allthe doors will lock, then all doors will automatically unlock remindingyou that your key is still in the ignition. The vehicle can still be locked with the k...

CHILDPROOF DOOR LOCKS • When these locks are set, therear doors cannot be opened fromthe inside. • The rear doors can be openedfrom the outside when thechildproof door locks are set, butthe doors are unlocked. The childproof locks are located onthe rear edge of each rear door andmust be set separate...

The transmitter allows you to: • remotely unlock the vehicle doors . • remotely lock all the vehicle doors . • remotely open the power liftgate (if equipped) . • remotely start/stop the vehicle (if equipped) . Refer to Remote start later in this section. • activate the personal alarm . • arm and dis...

To lock the doors, press and hold for half a second the lock area (blackbutton) on either front door handle. Activating intelligent access at the liftgate: If your IA key is within 3 feet (1 meter) of the liftgate, you can activate your intelligent accesssystem by pressing the exterior liftgate rele...

Press or activate intelligent access (if equipped) to automatically move the seat, power mirrors and adjustable foot pedals (if equipped) tothe desired memory position. The mirrors will move to the programmedposition and the seat will move to the easy entry position. The seat willmove to the final p...

2. Remove the old battery. Note: Please refer to local regulations when disposing oftransmitter batteries. 3. Insert the new battery. Refer tothe instructions inside the IA keyfor the correct orientation of thebattery. Press the battery down toensure that the battery is fullyseated in the battery ho...

The lights will not turn off if: • they have been turned on with the dimmer control, or • any door is open. Illuminated exit When all vehicle doors are closed, the ignition is turned off and the keyis removed from the ignition (IKT only), the interior dome lamps,parking lamps and the puddle lamps (i...

Vehicles with automatic climate control can be configured to operatewhen the vehicle is started. Refer to Remote start climate options in the Climate Controls chapter for more information and also refer to Message center in the Instrument Cluster chapter to learn how to enable different climate opti...

1. Press to lock all the doors. 2. Press two times. The exterior lamps will flash twice. If for some reason, the system fails to start, the horn will chirp. Note: If the vehicle has been remote started and is equipped with an IKT, you must turn the ignition on before driving the vehicle. If equipped...

SECURICODE™ KEYLESS ENTRY SYSTEM (IF EQUIPPED) You can use the keyless entrykeypad to: • lock or unlock the doors withoutusing a key. • recall memory seat/power mirrorspositions (if equipped). • enable/disable autolock andautounlock. • program/erase user codes. • arm/disarm the perimeter alarmsystem...

Tips: • Do not set a code that uses five of the same number. • Do not use five numbers in sequential order. • The factory set code will work even if you have set your own personalcode. Erasing personal code 1. Enter the factory set 5–digit code. 2. Within five seconds, press the 1 • 2 on the keypad ...

SECURILOCK 姞 PASSIVE ANTI-THEFT SYSTEM SecuriLock 威 passive anti-theft system is an engine immobilization system. This system is designed to help prevent the engine from beingstarted unless a coded integrated keyhead transmitter (IKT) or intelligent access keys programmed to your vehicle is used. Th...

The integrated keyhead transmitter (IKT) functions as both a programmed ignition key that operates all the locks and starts thevehicle, as well as a remote keyless entry transmitter. A maximum ofeight coded keys can be programmed to your vehicle; only four of theseeight coded keys can be IKTs with r...

1. Insert the first previously programmed coded key into the ignition. 2. Turn the ignition from off to on. Keep the ignition on for at least threeseconds, but no more than 10 seconds. 3. Turn the ignition off and remove the first coded key from the ignition. 4. After three seconds but within ten se...

If the intelligent access key has been successfully programmed, it can beused to activate the intelligent access with push button start feature andcan be used to start your vehicle. Note: To program MyKey 威 features, refer to MyKey 威 in this chapter. PERIMETER ALARM SYSTEM (IF EQUIPPED) The perimete...

WARNING: To minimize the risk of neck injury in the event of a crash, head restraints must be installed properly. Tilting head restraints (if equipped) The front head restraints may have a tilting feature for extra comfort. Totilt the head restraint, do the following: 1. Adjust the seatback to an up...

• Move the control in the directionsshown to move the seat forwardor backward. • Press the control to recline theseatback forward or rearward. Using the power lumbar support (if equipped) The power lumbar control is located on the outboard side of the seat. Press the forward/rearward side ofthe cont...

WARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physicalconditions, must exercise care when using the seat heater. The seatheater may cause burns even at low temperatures, e...

• There is a filter located undereach front seat. • The filter can be accessed from the 2nd row foot-well area. Move thefront seats all the way to the full front and full up positions to easeaccess. To remove an air filter: 1. Turn the vehicle off. 2. Push up on the outside rigid edgeof the filter u...

To install a filter: 1. First, position the filter in itshousing making sure that the farforward end is all the way up in thehousing. 2. Push in on the center of theoutside edge of the filter and rotateup into the housing until it clips intoposition. Memory feature (if equipped) This system allows a...

To remove the outboard head restraint, start with it folded and thenpress and hold both unlock/remove buttons and pull it upwards. To reinstall the head restraint, do the following: 1. Insert the two stems into the guide sleeves. 2. Push the head restraint down until it locks. Second row center seat...

Adjusting second row bucket and bench seat back Lift the handle to adjust seatback.Using same control will fold theseatback flat. Note: For the bench seat only, make sure the center safety belt isunbuckled before folding theseatback. WARNING: Always drive and ride with your seatback upright and the ...

5. To return the seatback to thefloor from tumbled position, rotatethe seat down until you hear itlatching to the floor. 6. To return the seatback to theupright position • Lift the seatback toward the rearof the vehicle, and • Rotate the seatback until youhear a click, locking it in theupright posit...

Press and hold the control locatedat the back of the rear door openingone time to fold the seat back downand tumble the seat forward foraccess to the 3rd row. Exiting the third row seat 1. Stow the second row head restraints: • Center head restraints (if equipped): Press the head restraint release b...

4. To return the seatback to theupright position • Lift the seatback toward the rearof the vehicle, and • Rotate the seatback until youhear a click, locking it in theupright position. Note: The seatback will not raise if the rear latch hooks are notproperly engaged to the floorstriker. If the seatba...

Press the seat selection button (4) to select either right-hand seat, theleft-hand seat or both. First select the seat you would like to adjust, thenselect one of the following: • Press the NORMAL button (1) to return the seat to the normalseating position. • Press the STOW button (2) to stow the se...

• Fold: Pull the head restraint release strap to fold the headrestraints forward. • Unfold: Pull the head restraints back to the upright position. WARNING: To minimize the risk of neck injury in the event of a crash, passenger occupants should not sit in the vehicle until the head restraint is place...

How does the Personal Safety System™ work? The Personal Safety System can adapt the deployment strategy of yourvehicle’s safety devices according to crash severity and occupantconditions. A collection of crash and occupant sensors providesinformation to the Restraints Control Module (RCM). During a ...

to the airbag when it begins to inflate. For some occupants, this occursbecause they are initially sitting very close to the airbag. For otheroccupants, this occurs when the occupant is not properly restrained bysafety belts or child safety seats and they move forward during pre-crashbraking. The mo...

Front safety belt energy management retractors The front outboard safety belt energy management retractors allowwebbing to be pulled out of the retractor in a gradual and controlledmanner in response to the occupant’s forward momentum. This helpsreduce the risk of force-related injuries to the occup...

Pregnant women should alwayswear their safety belt. The lap beltportion of a combination lap andshoulder belt should be positionedlow across the hips below the bellyand worn as tight as comfort willallow. The shoulder belt should bepositioned to cross the middle ofthe shoulder and the center of thec...

How to use the automatic locking mode Non-inflatable safety belts • Buckle the combination lap andshoulder belt. • Grasp the shoulder portion of thebelt and pull downward until theentire belt is pulled out. As thebelt retracts, you will hear aclicking sound. This indicates thesafety belt is now in t...

Disconnect the combination lap/shoulder belt and allow it to retractcompletely to disengage the automatic locking mode and activate thevehicle sensitive (emergency) locking mode. Rear Inflatable Safety Belt (if equipped) The rear inflatable safety belts arefitted in the shoulder portion of thesafety...

How does the rear inflatable safety belt system work? • The rear inflatable safety beltswill function like standardrestraints in everyday usage. • During a collision of sufficientforce, the inflatable belt willinflate from inside the webbing. • The fully inflated belt’s increaseddiameter more effect...

WARNING: Do not use extensions with an inflatable safety belt. WARNING: Do not use extensions to change the fit of the shoulder belt across the torso. Safety belt height adjustment WARNING: Position the safety belt height adjusters so that the belt rests across the middle of your shoulder. Failure t...

The following are reasons most often given for not wearing safety belts(All statistics based on U.S. data): Reasons given... Consider... “Crashes are rare events” 36700 crashes occur every day. The more we drive, the more we areexposed to “rare” events, even forgood drivers. 1 in 4 of us will be ser...

Reasons given... Consider... “I have an airbag” Airbags offer greater protection whenused with safety belts. Frontal airbagsare not designed to inflate in rear andside crashes or rollovers. “I’d rather be thrown clear” Not a good idea. People who are ejected are 40 times more likelyto DIE. Safety be...

WARNING: Modifying or adding equipment to the front end of the vehicle (including frame, bumper, front end body structure and tow hooks) may affect the performance of the airbag system,increasing the risk of injury. Do not modify the front end of thevehicle. Children and airbags Children must always...

The airbags inflate and deflaterapidly upon activation. After airbagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burnt propellant. This mayconsist of cornstarch, talcumpowder (to lubricate the bag) orsodium compounds (e.g., bakingsoda) that result from thecombustion pr...

• a readiness light and tone. • diagnostic module. • the electrical wiring which connects the components. • Front passenger sensing system. Refer to Front passenger sensing system later in this chapter. • “Passenger airbag off” or “pass airbag off” indicator lamp. Refer to Front passenger sensing sy...

Passenger airbag status indicator The front passenger sensing systemuses a passenger airbag statusindicator which will illuminateindicating that the front passengerfrontal airbag is either ON (enabled)or OFF (disabled). The indicatorlamp is located in the center stackof the instrument panel. Note: T...

• Objects stowed in the seatback map pocket (if equipped) • Objects placed on the occupant’s lap • Cargo interference with the seat • Other passengers pushing or pulling on the seat • Rear passenger feet and knees resting or pushing on the seat The conditions listed above may cause the weight of a p...

• If the airbag readiness light in the instrument cluster remainsilluminated, this may or may/not be a problem due to the frontpassenger sensing system. DO NOT attempt to repair or service the system; take your vehicleimmediately to an authorized dealer. If it is necessary to modify an advanced fron...

WARNING: Do not use accessory seat covers. The use of accessory seat covers may prevent the deployment of the side airbags and increase the risk of injury in an accident. WARNING: Do not lean your head on the door. The side airbag could injure you as it deploys from the side of the seatback. WARNING...

The side airbags are fitted on the outboard side of the seatbacks of thefront seats. In certain lateral collisions, the airbag on the side affected bythe collision will be inflated. The airbag was designed to inflate betweenthe door panel and occupant to further enhance the protection providedoccupa...

How does the Safety Canopy 姞 System work? The design and development of theSafety Canopy system includedrecommended testing proceduresthat were developed by a group ofautomotive safety experts known asthe Side Airbag Technical WorkingGroup. These recommended testingprocedures help reduce the risk of...

• A series of five beeps will be heard. The tone pattern will repeatperiodically until the problem and light are repaired. If any of these things happen, even intermittently, have the SRS servicedat your authorized dealer immediately. Unless serviced, the system maynot function properly in the event...

Important child restraint precautions WARNING: Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be purchased separately from the vehicle.Failure to follow these instructions and guidelines may result in ani...

Recommendations for Safety Restraints for Children Child size, height, weight, orage Recommendedrestraint type Infants ortoddlers Children weighing 40 lb (18 kg) orless (generally age four or younger) Use a child safety seat(sometimes called aninfant carrier,convertible seat, ortoddler seat). Smallc...

Recommendations for attaching child safety restraints for children RestraintType Child Weight Use any attachment method as indicated below by “X” LATCH(loweranchorsandtoptetheranchor) LATCH(loweranchorsonly) Safetybeltandtoptetheranchor Safetybelt andLATCH(loweranchorsand toptetheranchor) Safetybelt...

WARNING: Never let a passenger hold a child on his or her lap while the vehicle is moving. The passenger cannot protect the child from injury in a collision, which may result in serious injury ordeath. WARNING: Never use pillows, books, or towels to boost a child. They can slide around and increase ...

Follow all the safety restraint and airbag precautions that apply to adultpassengers in your vehicle. If the child is the proper height, age, and weight (as specified by yourchild safety seat or booster manufacturer), fits the restraint and can berestrained properly, then restrain the child in the c...

position whenever possible. If all children cannot be seated andrestrained properly in a rear seating position, properly restrain thelargest child in the front seat. When installing a child safety seat with combination lap/shoulder belts: • Use the correct safety belt buckle for that seating positio...

5. To put the retractor in the automatic locking mode, do the following: • Standard safety belt: grasp theshoulder portion of the belt andpull downward until all of the beltis pulled out. • Inflatable safety belt: grasp thelap portion of the inflatable safetybelt and pull upward until all ofthe belt...

WARNING: The standardized spacing for LATCH lower anchors is 280 mm (11 inches) center to center. Do not use LATCH lower anchors for the center seating position unless the child seatmanufacturer’s instructions permit and specify using anchors spaced atleast as far apart as those in this vehicle. Eac...

Perform the following steps to attach a child safety seat to the tetheranchor: 1. Route the tether strap: • Second row outboard seat positions: route the child safety seat tether strap over the seatback, under the head restraint and betweenthe head restraint posts. If needed the head restraint can b...

Child booster seats The belt-positioning booster (booster seat) is used to improve the fit ofthe vehicle safety belt. Children outgrow a typical child seat (e.g.,convertible or toddler seat) when they weigh about 40 lb (18 kg) and arearound four (4) years of age. Consult your child safety seat owner...

• High back booster seats If, with a backless booster seat,you cannot find a seating positionthat adequately supports yourchild’s head, a high back boosterseat would be a better choice. Children and booster seats vary in size and shape. Choose a booster thatkeeps the lap belt low and snug across the...

If the booster seat slides on the vehicle seat, placing a rubberized meshsold as shelf or carpet liner under the booster seat may improve thiscondition. Do not introduce any item thicker than this under the boosterseat. Check with the booster seat manufacturer’s instructions. The importance of shoul...

NOTICE TO UTILITY VEHICLE AND TRUCK OWNERS Utility vehicles and trucks handledifferently than passenger cars inthe various driving conditions thatare encountered on streets,highways and off-road. Utilityvehicles and trucks are not designedfor cornering at speeds as high aspassenger cars any more tha...

Power is supplied to all four wheels through a transfer case or powertransfer unit. 4WD vehicles allow you to select different drive modes asnecessary. Information on transfer case operation and shifting procedurescan be found in the Driving chapter. Information on transfer case maintenance can be f...

Treadwear The treadwear grade is a comparative rating based on the wear rate ofthe tire when tested under controlled conditions on a specifiedgovernment test course. For example, a tire graded 150 would wear oneand one-half (1 1 ⁄ 2 ) times as well on the government course as a tire graded 100. The ...

INFLATING YOUR TIRES Safe operation of your vehicle requires that your tires are properlyinflated. Remember that a tire can lose up to half of its air pressurewithout appearing flat. Every day before you drive, check your tires. If one looks lower than theothers, use a tire gauge to check pressure o...

Damage Periodically inspect the tire treads and sidewalls for damage (such asbulges in the tread or sidewalls, cracks in the tread groove andseparation in the tread or sidewall). If damage is observed or suspectedhave the tire inspected by a tire professional. Tires can be damagedduring off-road use...

It is recommended that the two front tires or two rear tires generally bereplaced as a pair. The tire pressure sensors mounted in the wheels (originally installed onyour vehicle) are not designed to be used in aftermarket wheels. The use of wheels or tires not recommended by Ford Motor Companymay af...

7. H: Indicates the tire’s speed rating. The speed rating denotes the speed at which a tire is designed to be driven for extended periods oftime under a standard condition of load and inflation pressure. The tireson your vehicle may operate at different conditions for load and inflationpressure. The...

Additional information contained on the tire sidewall for “LT” typetires “LT” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below. Note: Tire Quality Grades do not apply to this type of tire. 1. LT: Indicates a tire, designated by the Tire a...

Information on “T” type tires “T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below: T145/80D16 is an example of a tiresize. Note: The temporary tire size for your vehicle may be different fromthis example. Tire Quality Grades donot apply ...

following two conditions: (1) This device may not cause harmfulinterference, and (2) This device must accept any interference received,including interference that may cause undesired operation. WARNING: The tire pressure monitoring system is NOT a substitute for manually checking tire pressure. The ...

To restore the full functionality of the tire pressure monitoring system,have the damaged road wheel/tire repaired and remounted on yourvehicle. For additional information, refer to Changing tires with a TPMS in this section. When you believe your system is not operating properly The main function o...

Low tirepressurewarning light Possible cause Customer action required Flashingwarning light Spare tire in use Repair the damaged road wheel/tire and reinstall it on the vehicle torestore system functionality. For adescription on how the systemfunctions, refer to When your temporary spare tire is ins...

SNOW TIRES AND CABLES WARNING: Snow tires must be the same size, load index, speed rating as those originally provided by Ford. Use of any tire or wheel not recommended by Ford can affect the safety andperformance of your vehicle, which could result in an increased risk ofloss of vehicle control, ve...

VEHICLE LOADING – WITH AND WITHOUT A TRAILER This section will guide you in the proper loading of your vehicle and/ortrailer, to keep your loaded vehicle weight within its design ratingcapability, with or without a trailer. Properly loading your vehicle willprovide maximum return of vehicle design p...

Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue loador king pin weight is also part of cargo weight. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb weigh...

• Example only: WARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structuraldamage, serious damage to the vehicle, loss of control and personalinjury. Tires, Wheels and Lo...

GCW (Gross Combined Weight) – is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer. GCWR (Gross Combined Weight Rating) – is the maximum allowable weight of the vehicle and the loaded trailer – including all cargo andpassengers – that the vehicle can handle without r...

WARNING: Do not use replacement tires with lower load carrying capacities than the original tires because they may lower the vehicle’s GVWR and GAWR limitations. Replacement tireswith a higher limit than the original tires do not increase the GVWRand GAWR limitations. WARNING: Exceeding any vehicle ...

TRAILER TOWING Trailer towing with your vehicle may require the use of a trailer towoption package. An optional Class III towing hitch is available and may berequired for your towing purposes. Trailer towing puts additional loads on your vehicle’s engine,transmission, axle, brakes, tires and suspens...

2. To reinstall the cover, insert thefour plastic tabs on top of the coverinto the corresponding slots (B),and push the cover into the bumpertrim. 3. Hold the cover against the bumper trim and reinstall the two 1 ⁄ 4 -turn fasteners by turning them clockwise. Preparing to tow Use the proper equipmen...

Front-wheel drive (FWD) vehicles can be towed with all four wheels on the ground or with the front wheels off the ground by using a towdolly. If you are using a tow dolly follow the instructions specified by theequipment provider. If you are towing with all four wheels on the ground,refer to the tow...

STARTING Positions of the ignition (if equipped) If your vehicle is equipped with a push button start system, refer to Push button start system in this section for ignition modes. 1. Off— locks the gearshift leverand allows key removal. Thisposition also shuts the engine andall electrical accessorie...

Starting the engine Note: If your vehicle is equipped with a push button start system, refer to Push button start system in this section for starting. 1. Turn the key to 3 (on) withoutturning the key to 4 (start). 2. Turn the key to 4 (start), thenrelease the key as soon as theengine begins cranking...

Ignition modes 1. Off — press and release the START/STOP button without applying thebrake pedal when your vehicle is in on mode or when the engine isrunning and there is no vehicle speed. Note: In order to switch off the engine while the vehicle is in motion, press and hold the START/STOP button for...

If excessive radio frequencyinterference is present in the area,or if the battery in your IA key islow, it may be necessary to startyour car by inserting the IA key inthe back-up slot, located at the frontof the center console storagecompartment. Insert the IA key intothe slot with buttons facing do...

the system will search for an IA key inside the vehicle and the messagecenter will display NO KEY DETECTED if the IA key is no longerpresent. This message is a reminder that someone else in the vehiclemay have taken the IA key when exiting the vehicle. If the IA key is nolonger present in the vehicl...

Prior to using the engine block heater, follow these recommendations forproper and safe operation: • For your safety, use an outdoor extension cord that is productcertified by Underwriter’s Laboratory (UL) or Canadian StandardsAssociation (CSA). Use only an extension cord that can be usedoutdoors, i...

How to use the engine block heater Ensure the receptacle terminals are clean and dry prior to use. To cleanthem, use a dry cloth. Depending on the type of factory installed equipment, your engine blockheater will use .4 to 1.0 kilowatt-hours of energy per hour of use. Yourfactory installed block hea...

Brake assist The brake assist system provides full braking force during panic brakingsituations. It detects a rapid application of the brake pedal and uses theABS system to achieve maximum braking pressure. Once a panic brakeapplication is detected, the system will remain activated as long as thebra...

Parking brake Apply the parking brake wheneverthe vehicle is parked. To set theparking brake, press the parkingbrake pedal down until the pedalstops. The BRAKE warning lamp in theinstrument cluster illuminates andremains illuminated (when theignition is turned on) until theparking brake is released....

Hill descent control can maintain vehicle speeds on downhill gradesbetween 3 mph (5 km/h) and 20 mph (32 km/h). Above 20 mph(32 km/h), the system remains armed, but descent speed cannot be setor maintained. WARNING: Hill descent control does not provide hill hold at zero mph (0 km/h). When stopped, ...

• At speeds above 20 mph (32 km/h): When the HDC button is pressed,the HDC system will be enabled, the light on the button will beilluminated, and FOR HILL CNTRL, 20 MPH OR LESS will bedisplayed in the message center for several seconds. • For HDC to enable, the vehicle must be in a drive gear or (R...

WARNING: Loaded vehicles, with a higher center of gravity, may handle differently than unloaded vehicles. Do not overload your vehicle and use extra precautions, such as driving at slowerspeeds, avoiding abrupt steering changes and allowing for increasedstopping distance, when driving a heavily load...

M (Manual) This vehicle may be equipped with a SelectShift Automatic™transmission (SST) gearshift lever. SST is an automatic transmission withthe ability for the driver to change gears up or down. By moving thegearshift lever from D (Drive) to M (Manual), you now have control ofselecting the gear yo...

If your vehicle gets stuck in mud or snow Note: Do not rock the vehicle if the engine is not at normal operating temperature or damage to the transmission may occur. Note: Do not rock the vehicle for more than a minute or damage to the transmission and tires may occur, or the engine may overheat. If...

REARVIEW CAMERA SYSTEM (IF EQUIPPED) The rear video camera system,located on the liftgate above thelicense plate, provides a video imageof the area behind the vehicle. Itadds assistance to the driver whilereversing or reverse parking thevehicle. To use the rear videocamera system, place thetransmiss...

To use active guidelines, turn the steering wheel and point the activeguidelines towards an intended path. If the steering wheel position ischanged while reversing, the vehicle might deviate from the originalintended path. Active guidelines project the intended path of the vehicle. Fixedguidelines s...

Press (+) or (-) to manually adjust the zoom levels. You can choose from OFF, Level 1, Level 2 and Level 3. The selected level willappear between the buttons (i.e. Level 1). When activating manual zoommode, the system always starts from OFF. When enabled, Level 1, Level 2, or Level 3 will only be ac...

Night time and dark area use At night time or in dark areas, the camera system relies on the reverselamp lighting to produce an image. Therefore, it is necessary that bothreverse lamps are operating in order to get a clear image in the dark. Ifeither of the lamps are not operating, stop using the ca...

Operation The radar sensor detects vehiclesahead that are moving in the samedirection as your vehicle. If the radar detects that yourvehicle is rapidly closing in onanother vehicle, a red warning lightwill illuminate and an audiblewarning chime will sound. After that, if the risk of collisionfurther...

Activating/deactivating collision warning system To turn the warning system and/or chime on or off and set the warningsensitivity <– –>, refer to Message center in the Instrument Cluster chapter. Note: If the system cannot be turned off in a MyKey 威 equipped vehicle, refer to MyKey 威 in the Lo...

Automatic search for parking space To start, press the APA controlswitch (on the left side of theinstrument panel below theheadlamp switch). The touch screenwill display SEARCHING FORPARKING SPACE ON RIGHT(LEFT/SIDE) and a correspondinggraphic. To designate what side ofthe street to search on, use t...

Automatic steering into parking space Automatic steering is activated when you stop the vehicle, remove yourhands from the steering wheel and select the R (Reverse) gear. Be surethe steering wheel motion is not obstructed by any objects. The vehiclewill steer itself from this point on as you follow ...

The system should not be used if: • a foreign object (i.e. bike rack, trailer, etc.) is attached to the front orrear of the vehicle or at another location close to the sensors. • the front bumper or side sensors are damaged (i.e. in a collision) orobstructed by a foreign object (i.e. front bumper co...

Driving with blind spot mirrors Before a lane change, check themain mirror first, then check theblind spot mirror. If no vehicles arepresent in the blind spot mirror andthe traffic in the adjacent lane is ata safe distance, signal that you aregoing to change lanes. Glance overyour shoulder to verify...

BLIND SPOT INFORMATION SYSTEM (BLIS 姞 ) WITH CROSS TRAFFIC ALERT (CTA) (IF EQUIPPED) The BLIS 威 is a convenience feature that aids the driver in assessingwhether a vehicle is within an areaon either side of the vehicleextending rearward from the outsidemirrors to approximately 10 feet(3 meters) beyo...

Cross traffic alert (CTA) system operation The CTA system warns the driver of approaching vehicles when R(Reverse) is selected and the vehicle is backing out of a front-in parkingspot. It sounds a series of tones and flashes the BLIS 威 indicator found on the exterior mirror on the side of the approa...

CTA coverage also decreases when parking at shallow angles (refer tofigure for approximate zone coverage areas [sensor obstructed for vehicle on left] ). CTA detection limitations: Due to the nature of radar technology, there may be certain instances where vehicles entering and exiting theblind spot...

CTA and reverse sensing system (RSS) interaction CTA works along with the reverse sensing system (RSS) (if equipped).Become familiar with the warning tones of both systems. BLIS 威 and/or CTA on/off and disable operation The BLIS 威 and/or the CTA can be turned off via the message center. If either th...

Trailer tow false alerts When towing a trailer, the sensors may detect the trailer thus causing afalse alert. It may be desirable to turn the BLIS 威 off if the false alerts become annoying. Day and night brightness The BLIS 威 and/or CTA alert will automatically dim when the headlamp switch is in PAR...

Do not rock the vehicle if the engine is not at normal operatingtemperature or damage to the transmission may occur. Do not rock the vehicle for more than a few minutes or damageto the transmission and tires may occur or the engine mayoverheat. WARNING: Always set the parking brake fully and make su...

TERRAIN MANAGEMENT SYSTEM FAULT: If this message is displayed, cycling the key may clear the fault. If the fault is not clearedafter a key cycle, have the system serviced by an authorized dealer. MODE CHANGE NOT ACCEPTED, RETRY: If this message is displayed, a vehicle system cannot support a mode ch...

ROADSIDE ASSISTANCE Vehicles sold in the U.S. : Getting roadside assistance To fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program. Thisprogram is separate from the New Vehicle Limited Warranty. The serviceis available: • 24-hours,...

U.S. Ford vehicle customers who require Roadside Assistance, call1-800-241-3673. If you need to arrange roadside assistance for yourself, Ford MotorCompany will reimburse a reasonable amount for towing to the nearestdealership within 35 miles (56 km). To obtain reimbursementinformation, U.S. Ford ve...

Standard fuse amperage rating and color COLOR Fuse rating Mini fuses Standard fuses Maxi fuses Cartridge maxi fuses 2A Grey Grey — — 3A Violet Violet — — 4A Pink Pink — — 5A Tan Tan — — 7.5A Brown Brown — — 10A Red Red — — 15A Blue Blue — — 20A Yellow Yellow Yellow Blue 25A Natural Natural — — 30A G...

The fuses are coded as follows: Fuse/Relay Location Fuse Amp Rating Protected Circuits 1 30A One touch up/down driver sidefront window 2 15A Not used (spare) 3 30A One touch up/down passengerside front window 4 10A Interior demand lamps (overheadconsole, 2nd row, cargo), glovebox lamp, 2nd and 3rd r...

Fuse/Relay Location Fuse Amp Rating Protected Circuits 9 10A 4” Radio display, Power liftgatelogic, Electronic finish panel,SYNC 威 Base Module 10 10A Run/accessory relay (wipers, rearwasher), Rain sensor 11 10A Instrument cluster, Heads-updisplay 12 15A Interior courtesy lamps (overheadconsole, 2nd ...

Fuse/Relay Location Fuse Amp Rating Protected Circuits 45 5A Not used (spare) 46 10A Climate control module 47 15A Fog lamps, left and right turnsignal mirror feed 48 30A Circuit Breaker Rear power windows, Passengerpower window, One touch down(driver side only) 49 Delayed accessory relay Body contr...

CHANGING THE TIRES If you get a flat tire while driving, do not apply the brake heavily.Instead, gradually decrease your speed. Hold the steering wheel firmlyand slowly move to a safe place on the side of the road. Note: The tire pressure monitoring system (TPMS) indicator light will illuminate when...

The usage of a full-size dissimilar spare tire/wheel can lead toimpairment of the following: • Handling, stability and braking performance • Comfort and noise • Ground clearance and parking at curbs • Winter weather driving capability • Wet weather driving capability • All-Wheel driving capability (...

4. Remove the wing bolt thatsecures the jack kit by turning itcounterclockwise. 5. Remove the jack kit whichincludes jack (4), wheel wrench (lugwrench) (3), wheel chock (5),L-shaped bolt (1) and tow recoveryhook (2). 6. Remove the jack, wrench andwheel chock from the foam tray. 7. Turn the lead scre...

WHEEL LUG NUT TORQUE SPECIFICATIONS Retighten the lug nuts to the specified torque within 100 miles (160 km)after any wheel disturbance (rotation, flat tire, wheel removal, etc.). Lug nut socket size/Bolt size Wheel lug nut torque* ft-lb N • m 1 ⁄ 2 x 20 100 135 * Torque specifications are for nut a...

Connecting the jumper cables Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. 1. Connect the positive (+) jumpercable to the positive (+) terminal ofthe discharged battery. 2. Connect the other end of thepositive (+) cable to the positive(+)...

Removing the jumper cables Remove the jumper cables in the reverse order that they wereconnected. Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. 1. Remove the jumper cable fromthe ground metal surface. 2. Remove the jumper cable on thenega...

WRECKER TOWING If you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, yourroadside assistance service provider. It is recommended that your vehicle be towed with a wheel lift anddollies or flatbed equipment. Do not tow w...

If the vehicle is towed by other means or incorrectly, vehicledamage may occur. Ford Motor Company produces a towing manual for all authorized towtruck operators. Have your tow truck operator refer to this manual forproper hook-up and towing procedures for your vehicle. Emergency towing In case of a...

GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorizeddealer. While any authorized dealer handling your vehicle line willprovide warranty service, we recommend you return to your sellingauthorized dealer who wants to ensure your continued satisfaction. Plea...

In Canada: Mailing address Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E4 Telephone 1-800-565-3673 (FORD) Online www.ford.ca Additional assistance If you have questions or concerns, or are unsatisfied with the service youare receiving, follow ...

UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY) For vehicles delivered to authorized Canadian dealers. In those caseswhere you continue to feel that the efforts by Ford of Canada and theauthorized dealer to resolve a factory-related vehicle service concernhave been unsatisfactory, Ford of C...

WASHING THE EXTERIOR Wash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft 威 Detail Wash (ZC-3-A), which is available from your authorized dealer. • Never use strong household detergents or soap, such as dish washingor laundry liquid. These products can ...

ENGINE Engines are more efficient when they are clean because grease and dirtbuildup keep the engine warmer than normal. When washing: • Take care when using a power washer to clean the engine. The highpressure fluid could penetrate the sealed parts and cause damage. • Do not spray a hot engine with...

2.0L EcoBoost™ engine PLASTIC (NON-PAINTED) EXTERIOR PARTS Use only approved products to clean plastic parts. These products areavailable from your authorized dealer. • For routine cleaning, use Motorcraft 威 Detail Wash (ZC-3-A). • If tar or grease spots are present, use Motorcraft 威 Bug and Tar Rem...

• The wiper blades can be cleaned with isopropyl (rubbing) alcohol orMotorcraft 威 Premium Windshield Washer Concentrate (ZC-32-A) in the U.S., or Premium Quality Windshield Washer Fluid [CXC-37-(A, B,D, or F)] in Canada, available from your authorized dealer. Thiswasher fluid contains special soluti...

WARNING: Do not use chemical solvents or strong detergents when cleaning the steering wheel or instrument panel to avoid contamination of the airbag system. If a staining liquid like coffee/juice has been spilled on the instrumentpanel or on interior trim surfaces, clean as follows: 1. Wipe up spill...

WARNING: On vehicles equipped with seat-mounted airbags, do not use chemical solvents or strong detergents. Such products could contaminate the side-airbag system and affect performance ofthe side airbag in a collision. LEATHER SEATS (IF EQUIPPED) • Remove dust and loose dirt with a vacuum cleaner. ...

FORD AND LINCOLN CAR CARE PRODUCTS Your Ford or Lincoln authorized dealer has many quality productsavailable to clean your vehicle and protect its finishes. These qualityproducts have been specifically engineered to fulfill your automotiveneeds; they are custom designed to complement the style andap...

SERVICE RECOMMENDATIONS • Use the scheduled maintenance information to track routine service. • Use only recommended fuels, lubricants, fluids and service partsconforming to specifications. • Your authorized dealer can provide parts and service. PRECAUTIONS WHEN SERVICING YOUR VEHICLE • Do not work ...

OPENING THE HOOD 1. Inside the vehicle, pull the hoodrelease handle located under thebottom left corner of the instrumentpanel. 2. Go to the front of the vehicle andrelease the auxiliary latch that islocated under the front center ofthe hood. 3. Lift the hood. Note: Make sure the hood is properly cl...

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT 3.5L V6 engine 1. Engine coolant reservoir 2. Brake fluid reservoir 3. Battery 4. Power distribution box 5. Air filter assembly 6. Transmission fluid dipstick (out of view) 7. Engine oil dipstick 8. Engine oil filler cap 9. Windshield washer fluid res...

WINDSHIELD WASHER FLUID Add fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely. Only use a washer fluid that meets Ford specifications. Do not use anyspecial washer fluid such as windshield water repellent type fluid or bugwash. They may cause s...

CHANGING THE WIPER BLADES 1. Pull the wiper blade and armaway from the glass. 2. Squeeze the locking tabs torelease the blade from the arm andpull the blade away from the arm toremove it. 3. Attach the new blade to the arm and snap it into place. Replace wiper blades at least once per year for optim...

3. To attach the new wiper to thewiper arm, align the slot (1) andcross pin (2) and firmly press thewiper arm into the wiper blade untila click is heard. If you find this procedure too difficult, please see your dealer. ENGINE OIL Checking the engine oil Refer to the scheduled maintenance informatio...

Adding engine oil 1. Check the engine oil. For instructions, refer to Checking the engine oil in this chapter. 2. If the engine oil level is not within the normal range, add only certifiedengine oil of the recommended viscosity. Remove the engine oil filler capand use a funnel to pour the engine oil...

Do not use supplemental engine oil additives, cleaners or other enginetreatments. They are unnecessary and could lead to engine damage thatis not covered by Ford warranty. Change your engine oil according to the appropriate schedule listed inthe scheduled maintenance information. Ford production and...

Change your engine oil according to the appropriate schedule listed inthe scheduled maintenance information. Ford production and Motorcraft 威 replacement oil filters are designed for added engine protection and long life. If a replacement oil filter is usedthat does not meet Ford material and design...

WARNING: When lifting a plastic-cased battery, excessive pressure on the end walls could cause acid to flow through the vent caps, resulting in personal injury and/or damage to the vehicle orbattery. Lift the battery with a battery carrier or with your hands onopposite corners. WARNING: Keep batteri...

When the battery is disconnected or a new battery installed, thetransmission must relearn its adaptive strategy. As a result of this, thetransmission may shift firmly. This operation is considered normal andwill not affect function or durability of the transmission. Over time theadaptive learning pr...

Note: Electrical or electronic accessories added to the vehicle by the dealer or the owner may adversely affect battery performance anddurability and may also affect the performance of other electricalsystems in the vehicle. When a battery replacement is required, the battery should only bereplaced ...

The engine coolant should be withinthe COLD FILL RANGE as listed onthe engine coolant reservoir. Refer to scheduled maintenance information for service interval schedules. If the engine coolant has not been checked at the recommended interval,the engine coolant reservoir may become low or empty. If ...

may harm engine and cooling system components and may void thewarranty. Refer to Maintenance product specifications and capacities in this chapter. Note: Do not use stop leak pellets or cooling system sealants/additives as they can cause damage to the engine cooling and/or heating systems.This damag...

4. When you are sure that all the pressure has been released, use thecloth to turn it counterclockwise and remove the cap. 5. Fill the coolant reservoir slowly with the proper coolant mixture, towithin the COLD FILL RANGE or the FULL COLD level on the reservoir.If you removed the radiator cap in an ...

• NEVER increase the coolant concentration above 60%. • A coolant concentration of 60% will provide improved freezepoint protection. Increased engine coolant concentrationsabove 60% will decrease the overheat protectioncharacteristics of the engine coolant and may cause enginedamage. • If available,...

WARNING: To reduce the risk of collision and injury, be prepared that the vehicle speed may reduce and the vehicle may not be able to accelerate with full power until the fluid temperaturesreduce. The air conditioning may also cycle on and off during severe operatingconditions to protect overheating...

Refueling WARNING: Fuel vapor burns violently and a fuel fire can cause severe injuries. To help avoid injuries to you and others: • Read and follow all the instructions on the pump island; • Turn off your engine when you are refueling; • Do not smoke if you are near fuel or refueling your vehicle; ...

4. After you are done pumping fuel, slowly remove the fuel fillernozzle—allow about five seconds after pumping fuel before removing thefuel filler nozzle. This allows residual fuel to drain back into the fuel tankand not spill onto the vehicle. Note: A fuel spillage concern may occur if overfilling ...

Octane recommendations 3.5L V6 engine “Regular” unleaded gasoline with a pump (R+M)/2 octane rating of 87 isrecommended. Some stations offer fuels posted as “Regular” with anoctane rating below 87, particularly in high altitude areas. Fuels withoctane levels below 87 are not recommended. 2.0L V6 Eco...

Cleaner air Ford endorses the use of reformulated “cleaner-burning” gasolines toimprove air quality, per the recommendations in the Choosing the right fuel section. Running out of fuel Avoid running out of fuel because this situation may have an adverseeffect on powertrain components. If you have ru...

1. Locate the white plastic funnel. Itis attached to the underside of thespare tire cover or is included withthe tire changing tools. 2. Slowly insert the funnel into the Easy Fuel 威 system. 3. Fill the vehicle with fuel from the portable fuel container. 4. When done, clean the funnel or properly di...

The amount of usable fuel in the empty reserve varies and shouldnot be relied upon to increase driving range. When refueling yourvehicle after the fuel gauge indicates empty, you might not beable to refuel the full amount of the advertised capacity of thefuel tank due to the empty reserve still pres...

• Adding certain accessories to your vehicle (for example; bugdeflectors, rollbars/light bars, running boards, ski/luggage racks) mayreduce fuel economy. • Fuel economy may decrease with lower temperatures during the first8–10 miles (12–16 km) of driving. • Driving on flat terrain offers improved fu...

Allow the vehicle to sit for at least eight hours without starting theengine. Then, start the engine and complete the above driving cycle. Theengine must warm up to its normal operating temperature. Once started,do not turn off the engine until the above driving cycle is complete. Ifthe vehicle is s...

Note: Transmission fluid should be checked by an authorized dealer. If required, fluid should be added by an authorized dealer. Do not use supplemental transmission fluid additives, treatments orcleaning agents. The use of these materials may affect transmissionoperation and result in damage to inte...

6. Replace the air filter housingcover and secure the clamps. Besure that the air cleaner cover tabsare engaged into the slots of the aircleaner housing. Note: Failure to use the correct air filter element may result in severe engine damage. The customer warranty may be void for any damage tothe eng...

Brakes • Make sure brakes and parking brake are fully released. Tires • Maintain recommended air pressure. Miscellaneous • Make sure all linkages, cables, levers and pins under vehicle arecovered with grease to prevent rust. • Move vehicles at least 25 feet (8 m) every 15 days to lubricateworking pa...

The Vehicle Identification Number (VIN) contains the followinginformation: 1. World manufacturer identifier 2. Brake system / Gross VehicleWeight Rating (GVWR) / RestraintDevices and their location 3. Make, vehicle line, series, bodytype 4. Engine type 5. Check digit 6. Model year 7. Assembly plant ...

FORD CUSTOM ACCESSORIES FOR YOUR VEHICLE A wide selection of Ford Custom Accessories are available for yourvehicle through your local Ford or Ford of Canada dealer. These qualityaccessories have been specifically engineered to fulfill your automotiveneeds; they are custom designed to complement the ...

Peace of mind • Keyless entry keypad • Wheel locks • Cargo shade • Remote start • Vehicle security systems • Parking sensors* • Locking gas plug for capless fuel system *Ford Licensed Accessories (FLA) are warranted by the accessorymanufacturer’s warranty. Ford Licensed Accessories are fully designe...

FORD ESP EXTENDED SERVICE PLANS (U.S. ONLY) More than 32 million Ford and Lincoln owners have discovered thepowerful protection of Ford ESP. It is the only extended service planbacked by Ford Motor Company, and provides “peace of mind”protection beyond the New Vehicle Limited Warranty coverage. Up t...

FORD ESP EXTENDED SERVICE PLANS (CANADA ONLY) You can get more protection for your vehicle by purchasing a FordExtended Service Plan (ESP). Ford ESP is the only service contractbacked by Ford Motor Company of Canada, Limited. Depending on theplan you purchase, Ford ESP provides benefits such as: • R...

GENERAL MAINTENANCE INFORMATION Why maintain your vehicle? This section describes the scheduled maintenance required for yourvehicle. Carefully following this schedule helps protect against majorrepair expenses resulting from neglect or inadequate maintenance andmay also help to increase the value o...

Your vehicle is very sophisticated and built with multiple complexperformance systems. Every manufacturer develops these systems usingdifferent specifications and performance features. That’s why it’simportant to rely upon your dealership to properly diagnose and repairyour vehicle. Ford Motor Compa...

Convenience Many dealerships have extended evening and Saturday hours to makeyour service visit more convenient. How’s that for quality service? Factory-trained technicians Service technicians participate in extensive factory-sponsoredcertification training to help them become experts on the operati...

Normal Scheduled Maintenance At every oil changeinterval as indicatedby the messagecenter Change engine oil and filter Rotate tires, inspect tire wear and measure treaddepth Perform multi-point inspection (recommended) Inspect automatic transmission fluid level (ifequipped with dipstick); consult de...

Maintenance schedule log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ...

SPECIAL OPERATING CONDITIONS If you operate your vehicle primarily in any of the following conditions, you need to perform additional maintenance as indicated. If you occasionally operate your vehicle under any of these conditions, it is not necessary to perform the additional maintenance. For speci...

Perform the services in the preceding table when specified or within3,000 miles (4,800 km) of the OIL CHANGE REQUIRED messageappearing in the message center. Example #1: The OIL CHANGE REQUIRED message comes on at 28,751 miles (46,270 km); perform the 30,000 mile (48,000 km)automatic transmission fl...

Special operating condition log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D A...

EXCEPTIONS There are several exceptions to the Normal Schedule. They are listedbelow: Normal vehicle axle maintenance: Rear axles and power take-off (PTO) units with synthetic fluid and light-duty trucks equipped withFord-design axles are lubricated for life; do not check or change fluidunless a lea...

Engine coolant change log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M...

A Accessory delay ..........................94 Active Park Assist .....................300 Adaptive Cruise Control ...........100 AdvanceTrac ..............................275 Airbag supplemental restraintsystem ........................193, 201, 204 and child safety seats ............195description ...

U Universal garage door opener ..111 USB port ......................................58 V Vehicle Identification Number(VIN) ..........................................406 Vehicle loading ..........................251 Ventilating your vehicle ...........270 W Warning lights (see Lights) .......12 Wash...