Ford 2011 F-150 v.2- Manuals

Warning symbols on your vehicle When you see this symbol, it isimperative that you consult therelevant section of this guide beforetouching or attempting adjustmentof any kind. Protecting the environment We must all play our part inprotecting the environment. Correctvehicle usage and the authorizedd...

NOTICE TO OWNERS ABOUT HIGH PERFORMANCE TIRES Note: Your vehicle is equipped with high performance tires. When first driving the vehicle after it has been parked for a period of time, you mayexperience a temporary ride disturbance. This is a characteristic of thetires and should be no reason for con...

reports, or business searches your request. If you do not wantFord or its vendors to receive this information, do not activatethe service. Ford Motor Company and the vendors it uses toprovide you with this information do not store your vehicle travelinformation. For more information, see Traffic, Di...

These are some of the symbols you may see on your vehicle. Vehicle Symbol Glossary Safety Alert See Owner’s Guide Fasten Safety Belt Airbag - Front Airbag - Side Child Seat LowerAnchor Child Seat TetherAnchor Brake System Anti-Lock Brake System Parking Brake System Brake Fluid -Non-Petroleum Based P...

WARNING LIGHTS AND CHIMES Base instrument cluster shown in standard measure; metricsimilar. Uplevel clusters similar. Warning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause expensive repairs. A warning light mayilluminate when a problem exists with one ...

Uplevel message center Note: Some warning lights are reconfigurable telltale (RTT)indicator lights and will illuminate inthe message center. These lightsfunction the same as the otherwarning lights. The first threepositions will only display onewarning telltale at a time; the lastthree positions can...

Powertrain malfunction/Reducedpower/Electronic throttlecontrol (RTT): Displays when the engine has defaulted to a“limp-home” operation or when a transmission problem has beendetected and shifting may be restricted. If the light remains on, have thesystem serviced immediately by your authorized deale...

Low tire pressure warning: Illuminates when your tire pressureis low. If the light remains on atstart up or while driving, the tirepressure should be checked. Referto Inflating your tires in the Tires, Wheels and Loading chapter. When the ignition is first turned to on, the light will illuminate for...

ignition is turned on, or remains on, have the system servicedimmediately by your authorized dealer. Four-wheel drive high (RTT) (ifequipped): Displays when four-wheel drive high is engaged. Ifthe light fails to display when theignition is turned on, or remains on, have the system servicedimmediatel...

GAUGES Base cluster with automatic transmission shown; metric similar.Uplevel clusters similar. 1. Engine oil pressure gauge: Indicates engine oil pressure. The needle should stay in the normal operating range (between L and H). Ifthe needle falls below the normal range, stop the vehicle, turn off t...

• Differences in the automatic shut-off points on the fuel pumps atservice stations • Variations in top-off procedure from one fill-up to another • Rounding of the displayed values to the nearest 0.1 gallon (liter) To determine your average highway fuel economy, do the following: 1. Drive the vehicl...

System check and vehicle feature customization Press the SETUP button repeatedlyto cycle the message center throughthe following features: RESET FOR SYSTEM CHECK When this message appears, pressthe RESET button and the messagecenter will begin to cycle throughthe following systems and provide astatu...

EASY ENTRY This feature automatically moves the driver’s seat backwards for easyexit/entry from the vehicle. Press the RESET button to turn the easy entry/exit seat on or off. REAR PARK AID (if equipped) This feature sounds a tone to warn the driver of obstacles near the rearbumper, and functions on...

SLOW VEHICLE TO XX MPH FOR ELD (if equipped) — Displayed when the vehicle speed requirement for the electronic lockingdifferential mode has not been met. CHECK LOCKING DIFFERENTIAL (if equipped) — Displayed when an electronic locking differential (ELD) system fault is present. Formore information, r...

The message center display is located in the instrument cluster. Use thesteering wheel mounted buttons to navigate through the message center. Press the up/down buttons to moveup/down through the messagecenter choices. Press the left/right buttons to moveleft/right through the messagecenter choices....

When “Press OK for options” is displayed, pressing OK will open thetrailer options menus: Trailer Change ActiveTrailer When this is highlighted, press the right arrow key tochange the currently selected trailer. Use the up anddown arrows to select a trailer and press the OKbutton to choose the highl...

Trailer Reset TrailerMileage /Kilometers (ifequipped) Press the right arrow button when this is highlighted todisplay accumulated distance on a given trailer withinthe list of trailer(s). Use the up/down buttons to selecta trailer, then press and hold OK to reset the trailermileage (kilometers). * I...

Units Units English or Metric System Reset Hold OK to Reset System to Factory Default Information In this mode, you can view different vehicle system information andperform a system check. When “Press OK for info” is displayed, pressing OK will give youinformation on the currently selected/displayed...

VEHICLE NEAR TOP SPEED — Displayed when a MyKey 威 is in use and the MyKey speed limit is on and the vehicle speed is approaching80 mph (130 km/h). Refer to MyKey 威 in the Locks and Security chapter for more information. CHECK REAR PARK AID (if equipped) — Displayed when the transmission is in R (Rev...

WIRING FAULT ON TRAILER (if equipped) — Displayed if there are certain faults in the vehicle wiring and trailer wiring/brake system.Refer to Trailer towing in the Tires, Wheels and Loading chapter for more information. FOR OFF ROAD SLOW TO 5 MPH (if equipped) — Displayed when the vehicle speed requi...

AUDIO SYSTEMS AM/FM stereo system (if equipped) WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsibility ...

CD/MP3 Player CD: Press to enter CD/MP3 mode. If a disc is already loaded into the system, CD/MP3 play will begin where it ended last. If no CD is loaded,NO DISC will appear in the display. LOAD:For a single CD system– This control is not operational. To load a CD, simply insert the disc, label side...

DIRECT: Press DIRECT then enter the desired channel (i.e. 002) using the memory preset buttons (0–9). If you only enter one digit, press OKand the system will go to that satellite channel. If you enter three digits,the system will automatically go to that channel, if available. You maycancel your en...

SATELLITE RADIO MENU: Press MENU when satellite radio mode is active to access. Press OK to enter into the satellite radio menu.Press to cycle through the following options: • CATEGORY- Press OK to enter category mode. Press to scroll through the list of available SIRIUS channel Categories (Pop, Roc...

d. DISABLE ALERTS/ENABLE ALERTS: Press OK to enable/disable the satellite alert status which alerts you when yourselected songs are playing on a satellite radio channel. (The systemdefault is disabled.) SONG ALERTS ENABLED/DISABLED will appearin the display. The menu listing will display the opposit...

FADE: Press SEEK to adjust the audio between the back (B) and front (F) speakers. SPEED COMPENSATED VOLUME: With this feature on, radio volume automatically gets louder with increasing vehicle speed to compensatefor road and wind noise. The default setting is off. Use SEEK to adjust between SPEED OF...

Auxiliary input jack (Line in — if equipped) WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device or feature that maytake their focus off the road. Your primary responsibility is ...

Your vehicle may be equipped with aUSB port located on the instrumentpanel. This feature allows you toplug in media playing devices,memory sticks, and also to chargedevices if they support this feature.For further information on this feature, refer to Accessing and using your USB port in the SYNC 威 ...

• Wipe discs from the center out. Don’t: • Expose discs to direct sunlight or heat sources for extended periodsof time. • Clean using a circular motion. CD units are designed to play commercially pressed 4.75 in(12 cm) audio compact discs only. Due to technicalincompatibility, certain recordable and...

MP3 track and folder structure Your MP3 system recognizes MP3 individual tracks and folder structureas follows: • There are two different modes for MP3 disc playback: MP3 track mode(system default) and MP3 folder mode. For more information on trackand folder mode, refer to Sample MP3 structure in th...

SINGLE ZONE CLIMATE CONTROL 1. Defrost: Distributes outside air through the windshield defroster vents and de-mister vents. Can be used to clear the windshield of fogand thin ice. The system will automatically provide outside air to reducewindow fogging. Press this button again to return to the prev...

DUAL ZONE AUTOMATIC TEMPERATURE CONTROL WITHHEATED SEATS (IF EQUIPPED) Temperature conversion: To switch between Fahrenheit and Celsius, refer to Message center in the Instrument Cluster chapter. 1. + Fan speed control: Press to increase the fan speed. 2. Defrost: Distributes outside air through the...

4. A/C: Press to activate/deactivate air conditioning. Use with recirculated air to improve cooling performance and efficiency. A/Cengages automatically in MAX A/C, (defrost) and (floor/defrost). 5. AUTO: Press to engage full automatic operation. Select the desired temperature using the temperature ...

11. Power/Driver temperature: Press to activate/deactivate the climate control system. When the system is off, outside air is preventedfrom entering the vehicle through the vents. Turn to increase/decreasethe air temperature on the driver side of the vehicle. The control alsoadjusts the passenger si...

DUAL ZONE AUTOMATIC TEMPERATURE CONTROL WITHHEATED AND COOLED SEATS (NAVIGATION BASED–IFEQUIPPED) Temperature conversion: To switch between Fahrenheit and Celsius, refer to Message center in the Instrument Cluster chapter. 1. CLIMATE: Press to control the climate control system through the touch dis...

14. Defrost: Distributes outside air through the windshield defroster vents and de-mister vents. Can be used to clear the windshieldof fog and thin ice. The system will automatically provide outside air toreduce window fogging. Press this button again to return to the previousair flow selection. TOU...

Max A/C: Distributes recirculated air through the instrument panel vents to cool the vehicle. This re-cooling of the interior air is moreeconomical and efficient. Recirculated air may also help reduceundesirable odors from entering the vehicle. Press MAX A/C again fornormal operation. VOICE COMMANDS...

To aid in side window defogging/demisting in cold weather: 1. Select . 2. Select A/C. 3. Adjust the temperature control to maintain comfort. 4. Set the fan speed to the highest setting. 5. Direct the outer instrument panel vents towards the side windows. To increase airflow to the outer instrument p...

HEADLAMP CONTROL Rotate the headlamp controlclockwise to the first position to turn on the parking lamps. Rotate clockwise to the secondposition to also turn on the headlamps. Autolamp control (if equipped) The autolamp system provides lightsensitive automatic on-off control ofthe exterior lights no...

High beams Pull the lever fully past the detentto activate. Pull the lever fully againto deactivate. Flash-to-pass Pull toward you slightly to activateand release to deactivate. Daytime running lamps (DRL) (if equipped) Turns the headlamps on with a reduced output. In order for the DRLs to function:...

3. Turn on the low beam headlamps to illuminate the wall or screen andopen the hood. Cover one of the headlamps so no light hits the wall. 4. On the wall or screen you willobserve a light pattern with adistinct horizontal edge towards theright. If this edge is not at thehorizontal reference line, th...

• Push the lever up/down to the first stop position and hold. The turnsignals will flash for as long as the lever is held in this position. INTERIOR LAMPS Front row map lamps (if equipped) To turn on the map lamps, press theouter edge of the clear lens. Thefront row map lamp lights when: • any door ...

BULB REPLACEMENT Lamp assembly condensation Exterior lamps are vented to accommodate normal changes in pressure.Condensation can be a natural by-product of this design. When moist airenters the lamp assembly through the vents, there is a possibility thatcondensation can occur when the temperature is...

Function Number of bulbs Trade number Headlamps 2 H13/9008 Front park/turn lamps 2 3157NA (natural amber) Front sidemarker 2 168 Fog lamps 2 9140 Backup lamp (styleside) 2 921 Backup lamp (Harley) 2 921 Rear stop/turn/sidemarker/taillamp (styleside) 4 3057K High-mount brakelamp 1 912 Cargo lamp 2 91...

Replacing front parking lamp/turn signal/sidemarker bulbs 1. Make sure that the headlamp control is in the off position and openthe hood. 2. Remove the pushpin that holdsthe air deflector/protective coverfrom the upper inboard corner ofthe lamp. 3. Loosen the three retaining bolts(two at top of lamp...

MULTI-FUNCTION LEVER Windshield wiper: Rotate the end of the control away from you toincrease the speed of the wipers;rotate toward you to decrease thespeed of the wipers. Speed-dependent wipers (if equipped): When the wiper control is set to any of the interval settings except the longest pause set...

Windshield washer: Press the end of the stalk: • briefly: causes a single swipe ofthe wipers without washer fluid. • a quick press and hold: thewipers will swipe three times withwasher fluid. • a long press and hold: the wipers and washer fluid will be activated forup to ten seconds. Note: Do not op...

WARNING: Never adjust the steering column when the vehicle is moving. Power Tilt/Telescope Steering Column (if equipped) The steering column can beadjusted using the control on theside of the steering column. Pressand hold the front or rear of thecontrol to adjust the telescope.Press and hold the to...

On vehicles with memory feature, to prevent damage to the steeringcolumn, the steering column is designed to set a stopping position justshort of the end of the column position. If the steering columnencounters an object while moving up or down, a new stopping positionwill be set. To reset the steer...

The power point can switch to a fault mode when it is overloaded,overheated, or shorted. For overloading and shorting conditions, unplugyour device and turn the ignition key off then on. For an overheatingcondition, let the system cool off, then turn the ignition key off then on.The 110V AC power po...

Press and pull the window switchesto open and close windows. • Press down (to the first detent)and hold the switch to open. • Pull up (to the first detent) andhold the switch to close. Rear Window Buffeting: When one or both of the rear windows are open, the vehicle may demonstrate a wind throb or b...

Accessory delay (if equipped) With accessory delay, the window switches may be used for up to10 minutes after the ignition switch is turned to the off position or untilany door is opened. INTERIOR MIRROR The interior rear view mirror has two pivot points on the support armwhich lets you adjust the m...

EXTERIOR MIRRORS Power side view mirrors (if equipped) WARNING: Do not adjust the mirror while the vehicle is in motion. To adjust your mirrors: 1. Rotate the control clockwise toadjust the right mirror and rotatethe control counterclockwise toadjust the left mirror. 2. Move the control in the direc...

On vehicles not equipped with rear defrost, press the heated mirrorcontrol located on the climate control panel. For more information refer to the Climate Controls chapter. Note: If your vehicle is equipped with the Auto dimming feature, the mirror glass is thicker and will take longer to defrost. D...

Using speed controls The speed controls are located on the steering wheel. The followingbuttons work with speed control: – SET +: Press to set a speed or to increase or decrease the set speed. CNCL (Cancel)/RSM (Resume): Press to return cancel or resume aset speed. ON/OFF: Press to turn speed contro...

STEERING WHEEL CONTROLS (IF EQUIPPED) Radio control features – VOL + (Volume): Press to decrease or increase the volume. (Seek): Press to select the previous/next radio stationpreset, CD track or satellite radiostation preset depending on whichmedia mode you are in. MEDIA: Press repeatedly to scroll...

For further information on the SYNC 威 system, refer to the SYNC 威 supplement. Navigation system/SYNC 威 hands-free control features (ifequipped) Press control briefly until the voice icon appears on the Navigation display to use the voicecommand feature. Press to activate phone mode or answer a phone...

To open the moon roof: Press and release the SLIDE control, the moonroof will open automatically. Pressthe switch again to stop the moonroof. To close the moon roof: Pull and release the SLIDE control, the moonroof will close automatically. Pressthe switch again to stop the moonroof. Bounce-back: Wh...

• Fixed code garage door openers were produced prior to 1996. Fixedcode uses the same coded signal every time. It is manuallyprogrammed by setting DIP switches for a unique personal code. If you do not know if your garagedoor opener is a rolling code orfixed code device, open your garagedoor opener’...

1. Before removal of the tailgate,locate and disconnect the tailgatein-line connector under the pickupbox on the passenger side of thevehicle near the spare tire. 2. Install a protective cap (locatedin the glove box) onto the in-linerearview camera system connectorthat remains under the pickup box. ...

2. Open the latches to release thepanels. 3. Rotate the panels toward thetailgate. Repeat Steps 1–3 for the other side of the bed extender. 4. Connect the two panels, then rotate both knobs a quarter-turnclockwise to secure the panels. Driver Controls 125 2011 F-150 (f12) Owners Guide, 2nd PrintingU...

Cross bars: Aluminum cross bars with T-slot channels in all four sides, and a latch mechanism that allows the end supports to snap over theexisting cleats. Cross bars are rated to hold loads up to 100 lb (45 kg)load evenly distributed between the two crossbars, and the T-slots aresized to accept ind...

Bed divider: This panel will keep small items up to 400 lb (180 kg) in position in the pickup box. Also includes T-slots to allow attachment ofindustry-standard roof rack accessories. • To remove bed divider, lift handle on each side and lift end supportshroud off of the cleat. • To install bed divi...

Side mounted tool bins: Watertight bins can be positioned at any point along the side rails and can be easily removed (even when full), andcarried to wherever the contents are needed. Each bin will hold up to60 lb (27 kg) of cargo, and has a drain plug for use as a cooler. Note: When multiple bins a...

KEYS Your vehicle may be equipped withtwo integrated keyhead transmitters(IKTs). The key blade functions as aprogrammed key which starts thevehicle and unlocks/locks all thedoors. The transmitter portionfunctions as the remote entrytransmitter. Your IKTs are programmed to your vehicle; using a non-p...

MyKey 威 restricted features Standard settings – These settings cannot be changed • The audio system will be muted whenever Belt-Minder 威 is activated until the safety belts are buckled. Refer to the Seating and Safety Restraints chapter for a detailed description of Belt-Minder 威 operation. • Low fu...

Refer to Message center in the Instrument Cluster chapter for MyKey 威 system warnings displays. Using MyKey 威 with remote start systems MyKey 威 is not compatible with non Ford-approved aftermarket remote start systems. If you choose to install a remote start system please seeyour authorized dealer f...

Keyless entry keypad autolock enable/disable procedure 1. Turn the ignition to the offposition. 2. Close all the doors. 3. Enter factory–set 5–digit entrycode. 4. Press and hold the 3 • 4. While holding the 3 • 4 press the 7 • 8. 5. Release the 7 • 8. 6. Release the 3 • 4. The user should receive a ...

CHILDPROOF DOOR LOCKS (ON VEHICLES WITH REAR DOORS) • When these locks are set, therear doors cannot be opened fromthe inside. • The rear doors can be openedfrom the outside when thechildproof door locks are set, butthe doors are unlocked. The childproof locks are located onthe rear edge of each rea...

The typical operating range for your IKT is approximately 33 feet(10 meters). A decrease in operating range could be caused by: • weather conditions, • nearby radio towers, • structures around the vehicle, or • other vehicles parked next to your vehicle. The IKT allows you to: • remotely unlock the ...

Switching from two step to one step door unlocking Your vehicle comes with two step unlocking enabled. Unlocking can beswitched between two step and one step door unlocking by pressing andholding both the and buttons simultaneously on the remote entry transmitter for approximately four seconds. The ...

2. Press and hold control button 1for five seconds. A tone will beheard after two seconds confirmingmemory position has been set.Continue to hold until a second toneis heard after five seconds. 3. Within three seconds press . 4. Wait 10 seconds, then press . 5. Repeat this procedure formemory 2 and ...

4. Insert the new battery. Refer to the instructions inside the IKT for thecorrect orientation of the battery. Press the battery down to ensure thatthe battery is fully seated in the battery housing cavity. 5. Snap the battery cover back onto the key. Note: Replacement of the battery will not cause ...

Remote start (if equipped) Your vehicle may be equipped with the remote start feature which allowsyou to start the engine from outside the vehicle. If your transmitter hasa icon, you have remote start. The remote start feature has an extended operating range which allows you to remote start your veh...

The parking lamps will remain on and the engine will run for 5, 10, or15 minutes, depending on how you programmed the system. To selectthe duration of the remote start system refer to Message center in the Instrument Cluster chapter. Extending the engine run time To keep the engine running for anoth...

3. Enter your personal 5-digit code. Each number must be enteredwithin five seconds of each other. 4. To associate the entry code with a memory setting, enter a sixth digitto indicate which driver should be set in a memory recalled by thepersonal entry code: • Pressing 1 • 2 recalls Driver 1 setting...

Unlocking and locking the doors using keyless entry To unlock the driver’s door, enter the factory set 5-digit code or your personal code. Each number must be pressed within five seconds of eachother. The interior lamps will illuminate after entering a valid keypadentry code. To unlock all doors, pr...

The turn signal lamps will flash once when all doors and the hood areclosed indicating the vehicle is locked and entering the 20 secondcountdown. Disarming the system You can disarm the system by any of the following actions: • Unlock the doors by pressing the control on your remote entry transmitte...

FRONT SEATS WARNING: Reclining the seatback can cause an occupant to slide under the seat’s safety belt, resulting in severe personal injuries in the event of a collision. WARNING: Do not pile cargo higher than the seatbacks to reduce the risk of injury in a collision or sudden stop. WARNING: Before...

Front seat • Lift the track release bar to movethe seat forward or rearward.Make sure that the seat isrelatched into place. Seating and Safety Restraints 159 2011 F-150 (f12) Owners Guide, 2nd PrintingUSA (fus)

• To gain access to the storagecompartment (if equipped) inyour armrest, lift the latch toopen the lid. Using the manual lumbar support (if equipped) For more lumbar support, turn thelumbar support control toward thefront of vehicle. For less lumbar support, turn thelumbar support control toward the...

Using the power lumbar support (if equipped) The power lumbar control is located on the outboard side of the seat. Press the forward side of the controlfor additional support. Press the rear side of the control toreduce support. Adjusting the front power seat (if equipped) WARNING: Never adjust the ...

The control is located on the outboard side of the seat cushion. Move the switch to raise or lowerthe front or rear portion of the seatcushion. Move the switch to move the seatforward, backward, up or down. Power recline (if equipped) Move the switch to recline theseatback forward or rearward. Memor...

To operate the heated seats: Press the heated seat symbol tocycle through the various heatsettings and off. Warmer settings areindicated by more indicator lights. Cooled seats The cooled seats will only function when the engine is running. To operate the cooled seats: Press the cooled seat symbol to...

To remove an air filter: 1. Turn the vehicle off. 2. Push up on the outside rigid edgeof the filter until the tabs arereleased, then rotate the air filtertoward the front of the vehicle. 3. Remove filter. To install a filter: 1. First, position the filter in itshousing making sure that the farforwar...

WARNING: The adjustable head restraint is a safety device. Whenever possible it should be installed and properly adjusted when the seat is occupied. The adjustable head restraintsconsist of : • a trimmed energy absorbing foamand structure (1), • two steel stems (2), • a guide sleeve adjust/releasebu...

Returning the seat to seating position WARNING: Make sure that cargo or any objects are not trapped underneath the seat cushion before returning the seat cushion to its original position, and that the seat cushion locks into place. Failureto do so may prevent the seat from operating properly in the ...

SAFETY RESTRAINTS Personal Safety System™ The Personal Safety System provides an improved overall level of frontalcrash protection to front seat occupants and is designed to help furtherreduce the risk of airbag-related injuries. The system is able to analyzedifferent occupant classifications and co...

Driver and passenger dual-stage airbag supplemental restraints The dual-stage airbags offer the capability to tailor the level of airbaginflation energy. A lower, less forceful energy level is provided for morecommon, moderate-severity impacts. A higher energy level is used forthe most severe impact...

WARNING: When possible, all children 12 years old and under should be properly restrained in a rear seating position. The front passenger sensing system can automatically turn off thepassenger front airbag when a rear facing child seat, a forward-facingchild restraint, or a booster seat is detected....

The Restraints Control Module (RCM) monitors its own internal circuitsand the circuits for the airbag supplemental restraints, crash sensor(s),safety belt pretensioners, front safety belt buckle sensors, and the driverseat position sensor. In addition, the RCM also monitors the restraintswarning lig...

WARNING: In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a safety belt. WARNING: Each seating position in your vehicle has a specific safety belt assembly which is made up of one buckle and one tongue that are designed to be used as a pair. 1) Use th...

3. Insert the belt tongue into the proper buckle for your seating positionuntil you hear a snap and feel it latch. 4. Make sure the tongue is securely fastened to the buckle by pulling onthe tongue. WARNING: The lap belt should fit snugly and as low as possible around the hips, not across the waist....

Pregnant women should alwayswear their safety belt. The lap beltportion of a combination lap andshoulder belt should be positionedlow across the hips below the bellyand worn as tight as comfort willallow. The shoulder belt should bepositioned to cross the middle ofthe shoulder and the center of thec...

Automatic locking mode In this mode, the shoulder belt is automatically pre-locked. The belt willstill retract to remove any slack in the shoulder belt. The automaticlocking mode is not available on the driver safety belt or the optionalfront seat’s center safety belt. When to use the automatic lock...

WARNING: BELT AND RETRACTOR ASSEMBLY MUST BE REPLACED if the safety belt assembly “automatic locking retractor” feature or any other safety belt function is not operatingproperly when checked by an authorized dealer. Failure to replace thebelt and retractor assembly could increase the risk of injury...

WARNING: The Personal Safety System 威 provides the most benefit to belted occupants. The system monitors and tailors the airbag deployment based upon safety belt usage. Failure to properlywear your safety belt will increase your risk of injury. Front safety belt height adjustment Your vehicle has sa...

Reasons given... Consider... “I’d rather be thrownclear” Not a good idea. People who are ejected are 40 times more likely to DIE. Safety belts help prevent ejection, WE CAN’T“PICK OUR CRASH”. WARNING: Do not sit on top of a buckled safety belt or insert a latchplate into the buckle to avoid the Belt...

1. Turn the ignition switch to the on position. DO NOT START THEENGINE. 2. Wait until the safety belt warning light turns off. (Approximately oneminute) • Step 3 must be completed within 30 seconds after the safety beltwarning light turns off. 3. For the seating position being disabled, buckle then ...

AIRBAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) The airbag supplemental restraint system is designed to work inconjunction with the safety belts to help protect the driver and frontoutboard passenger from certain upper body injuries. The term“supplemental restraint” means the airbags are intended as a su...

Important SRS precautions The SRS is designed to work withthe safety belt to help protect thedriver and right front passengerfrom certain upper body injuries.Airbags DO NOT inflate slowly;there is a risk of injury from adeploying airbag. WARNING: All occupants of the vehicle, including the driver, s...

If two adults and a child occupy a Regular Cab , properly restrain the child in the center front unless doing so would interfere with driving thevehicle. This arrangement provides lap and shoulder belt protection forall occupants, and airbag protection for the adults. All occupants of thevehicle sho...

The front passenger sensing systemuses a ⬙ passenger airbag off ⬙ or ⬙ pass airbag off ⬙ indicator which will illuminate and stay lit to remind youthat the front passenger frontalairbag is disabled. The indicatorlamp is located in the center stackof the instrument panel just above the radio. Note : ...

Objects Pass Airbag OffIndicator Lamp Passenger Airbag Small (i.e. three-ringbinder, small purse,bottled water) Unlit Disabled Medium (i.e. heavybriefcase, fully packedluggage) Lit Disabled Empty seat, or smallto medium object withsafety belt buckled Lit Disabled In case there is a problem with thef...

A difficulty with the system is indicated by one or more of the following: • The readiness lights will eitherflash or stay lit. • The readiness lights will notilluminate immediately afterignition is turned on. • A series of five beeps will be heard. The tone pattern will repeatperiodically until the...

WARNING: Several airbag system components get hot after inflation. Do not touch them after inflation. WARNING: If the side airbag has deployed, the airbag will not function again.The side airbag system(including the seat) must beinspected and serviced by anauthorized dealer. If the airbag is not rep...

A difficulty with the system is indicated by one or more of the following: • The readiness light (same light as for front airbag system) will eitherflash or stay lit. • The readiness light will not illuminate immediately after ignition isturned on. • A series of five beeps will be heard. The tone pa...

SAFETY RESTRAINTS FOR CHILDREN See the following sections for directions on how to properly use safetyrestraints for children. Also see Airbag supplemental restraint system (SRS) in this chapter for special instructions about using airbags. Important child restraint precautions WARNING: Always make ...

Recommendations for Safety Restraints for Children Child size, height, weight, or age Recommendedrestraint type Infants ortoddlers Children weighing 40 lb (18 kg) orless (generally age four or younger) Use a child safetyseat (sometimescalled an infantcarrier, convertibleseat, or toddlerseat). Smallc...

Recommendations for attaching child safety restraints for children RestraintType Child Weight Use any attachment method as indicated below by “X” LATCH(loweranchorsandtoptetheranchor) LATCH(loweranchorsonly) Safetybeltandtoptetheranchor Safetybelt andLATCH(loweranchorsand toptetheranchor) Safetybelt...

WARNING: Never let a passenger hold a child on his or her lap while the vehicle is moving. The passenger cannot protect the child from injury in a collision, which may result in serious injury ordeath. WARNING: Never use pillows, books, or towels to boost a child. They can slide around and increase ...

Follow all the safety restraint and airbag precautions that apply to adultpassengers in your vehicle. If the child is the proper height, age, and weight (as specified by yourchild safety seat or booster manufacturer), fits the restraint and can berestrained properly, then restrain the child in the c...

Use of inboard lower anchors from the outboard seating positions(center seating use) The lower anchors at the center of the second row rear seat are spaced25.7 inches (652 mm) apart. The standardized spacing for LATCH loweranchors is 11 inches (280 mm) center to center. A child seat with rigidLATCH ...

The passenger seats of your vehicle are equipped with built-in tetherstrap anchors located behind the seats as described below. The tether anchors in your vehicle may be loops of webbing above theseatback or an anchor bracket behind the seat on the rear edge of theseat cushion. The rear seat in the ...

Once the child safety seat has been installed using either the safety belt,the lower anchors of the LATCH system, or both, you can attach the toptether strap. Front seat tether strap attachment (Regular cab) 1. Route the child safety seat tether strap over the back of the seat andunder the head rest...

Rear seat tether strap attachment (SuperCab and SuperCrew) There are three loops of webbingjust above the back of the rear seat(along the bottom edge of the rearwindow). These loops are to beused as both routing loops andanchor loops for up to three childsafety seat tether straps. Forexample, the ce...

3. Tighten the tether strapaccording to the child seatmanufacturer’s instructions. If the safety seat is not anchored properly, the risk of a child beinginjured in a collision greatly increases. If your child restraint system is equipped with a tether strap, and thechild restraint manufacturer recom...

• High back booster seats If, with a backless booster seat,you cannot find a seating positionthat adequately supports yourchild’s head, a high back boosterseat would be a better choice. Children and booster seats vary in size and shape. Choose a booster thatkeeps the lap belt low and snug across the...

If the booster seat slides on the vehicle seat, placing a rubberized meshsold as shelf or carpet liner under the booster seat may improve thiscondition. Do not introduce any item thicker than this under the boosterseat. Check with the booster seat manufacturer’s instructions. The importance of shoul...

NOTICE TO UTILITY VEHICLE AND TRUCK OWNERS Utility vehicles and trucks handledifferently than passenger cars inthe various driving conditions thatare encountered on streets,highways and off-road. Utilityvehicles and trucks are not designedfor cornering at speeds as high aspassenger cars any more tha...

Power is supplied to all four wheels through a transfer case or powertransfer unit. 4WD vehicles allow you to select different drive modes asnecessary. Information on transfer case operation and shifting procedurescan be found in the Driving chapter. Information on transfer case maintenance can be f...

Treadwear The treadwear grade is a comparative rating based on the wear rate ofthe tire when tested under controlled conditions on a specifiedgovernment test course. For example, a tire graded 150 would wear oneand one-half (1 1 ⁄ 2 ) times as well on the government course as a tire graded 100. The ...

Every day before you drive, check your tires. If one looks lower than theothers, use a tire gauge to check pressure of all tires and adjust ifrequired. At least once a month and before long trips, inspect each tire and checkthe tire pressure with a tire gauge (including spare, if equipped). Inflatea...

WARNING: Age Tires degrade over time depending on many factors such as weather, storage conditions, and conditions of use (load, speed,inflation pressure, etc.) the tires experience throughout their lives.In general, tires should be replaced after six years regardless of treadwear. However, heat cau...

It is recommended that the two front tires or two rear tires generally bereplaced as a pair. The tire pressure sensors mounted in the wheels (originally installed onyour vehicle) are not designed to be used in aftermarket wheels. The use of wheels or tires not recommended by Ford Motor Companymay af...

Tire and wheel alignment A bad jolt from hitting a curb or pothole can cause the front end of yourvehicle to become misaligned or cause damage to your tires. If yourvehicle seems to pull to one side when you’re driving, the wheels may beout of alignment. Have an authorized dealer check the wheel ali...

5. 15: Indicates the wheel or rim diameter in inches. If you change your wheel size, you will have to purchase new tires to match the new wheeldiameter. 6. 95: Indicates the tire’s load index. It is an index that relates to how much weight a tire can carry. You may find this information in yourowner...

Additional information contained on the tire sidewall for “LT” typetires “LT” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below. Note: Tire Quality Grades do not apply to this type of tire. 1. LT: Indicates a tire, designated by the Tire a...

Information on “T” type tires “T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below: T145/80D16 is an example of a tiresize. Note: The temporary tire size for your vehicle may be different fromthis example. Tire Quality Grades donot apply ...

The tire pressure monitoring system complies with part 15 of the FCCrules and with RSS-210 of Industry Canada. Operation is subject to thefollowing two conditions: (1) This device may not cause harmfulinterference, and (2) This device must accept any interference received,including interference that...

Understanding your tire pressure monitoring system (TPMS) The tire pressure monitoring system measures pressure in your four roadtires and sends the tire pressure readings to your vehicle. The low tirepressure warning light will turn on if the tire pressure is significantly low.Once the light is ill...

When you believe your system is not operating properly The main function of the tire pressure monitoring system is to warn youwhen your tires need air. It can also warn you in the event the system is nolonger capable of functioning as intended. Please refer to the followingchart for information conc...

Low tire pressurewarning light Possible cause Customer action required Flashing warninglight Spare tire inuse Your temporary spare tire is inuse. Repair the damaged roadwheel and re-mount it on thevehicle to restore systemfunctionality. For a descriptionof how the system functionsunder these conditi...

TPMS reset procedure The TPMS reset procedure needs to be performed after each tirerotation on vehicles that require different recommended tirepressures in the front tires as compared to the rear tires. WARNING: To determine the required pressure(s) for your vehicle, refer to the Safety Compliance C...

8. Remove the valve cap from the valve stem on the right rear tire;decrease the air pressure until the horn sounds. 9. Remove the valve cap from the valve stem on the left rear tire;decrease the air pressure until the horn sounds. Training is complete after the horn sounds for the last tire trained(...

Follow these guidelines when using snow tires and chains: • If possible, avoid fully loading your vehicle. • Use only SAE Class S chains. • Install chains securely, verifying that the chains do not touch anywiring, brake lines or fuel lines. • Drive cautiously. If you hear the chains rub or bang aga...

Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be foundon the Tire Label on the B-Pillar or the edge of the driver’s door(vehicles exported outside the US and Canada may not have a TireLabel). Look for “THE COMBINED WEI...

Example only: Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue loador king pin weight is also part of cargo weight. Tires, Wheels and Loading 253 2011 F-150 (f12) Owners Guide, 2nd PrintingUSA (fus)

GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all payload. GAWR (Gross Axle Weight Rating) – is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Safety Compliance...

• Example only: WARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structuraldamage, serious damage to the vehicle, loss of control and personalinjury. Tires, Wheels and Lo...

GCW (Gross Combined Weight) – is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer. GCWR (Gross Combined Weight Rating) – is the maximum allowable weight of the vehicle and the loaded trailer – including all cargo andpassengers – that the vehicle can handle without r...

WARNING: Exceeding any vehicle weight rating limitation could result in serious damage to the vehicle and/or personal injury. Steps for determining the correct load limit: 1. Locate the statement “The combined weight of occupants and cargoshould never exceed XXX kg or XXX lb.” on your vehicle’s plac...

to transport the cement to your home? If you and your friend eachweigh 220 lb. (99 kg), the calculation would be: 1400 - (2 x 220) - (12x 100) = 1400 - 440 - 1200 = - 240 lb. No, you do not have enoughcargo capacity to carry that much weight. In metric units, thecalculation would be: 635 kg - (2 x 9...

SuperCrew Engine Rear axle ratio Maximum GCWR - lb (kg) Maximum Trailer Weight - lb (kg) 5.0L 3.55 13500 (6123) 7900 (3583) 3.73 14900 (6759) 9300 (4218) 4WD 157” wheelbase 3.5L 3.31 14000 (6350) 8000 (3629) 3.55/3.73 15500 (7031) 9600 (4354) 3.5L (Max Trailer Tow Package) 3.73/4.10 17100 (7756) 112...

4. Measure the height of the top of the front wheel opening on thefender a second time, this is H2.5. Install and adjust the tension in the weight distributing bars so thatthe height of the front fender is approximately halfway between H1 andH2.6. Check that the trailer is level. If not level, adjus...

• TRAILER DISCONNECTED: This message is displayed and accompanied by a single chime, when a trailer connection wasdetermined and then a disconnection, either intentionally orunintentionally, has been sensed during a given ignition cycle. It is alsodisplayed if a truck or trailer wiring fault occurs ...

5. In a traffic-free environment, tow the trailer on a dry, level surface ata speed of 20–25 mph (30–40 km/h) and squeeze the manual controllever completely. 6. If the trailer wheels lock up (indicated by squealing tires), reduce theGAIN setting; if the trailer wheels turn freely, increase the GAIN ...

• Avoid towing in adverse weather conditions. The TBC does notprovide anti-lock control of the trailer wheels. Trailer wheels can lockup on slippery surfaces, resulting in reduced stability of trailer andtow vehicle. • The TBC is equipped with a feature which reduces output at vehiclespeeds below 11...

Driving while you tow When towing a trailer: • Do not drive faster than 70 mph (113 km/h) during the first 500 miles(800 km) of trailer towing and don’t make full-throttle starts. • Turn off the speed control. The speed control may shut offautomatically when you are towing on long, steep grades. • A...

Launching or retrieving a boat Disconnect the wiring to the trailer before backing the trailerinto the water. Reconnect the wiring to the trailer after thetrailer is removed from the water. When backing down a ramp during boat launching or retrieval: • Do not allow the static water level to rise abo...

4WD vehicles equipped with a manual-shift transfer case: • Release the parking brake. • Turn the key in the ignition to the off position. • Place the transmission in N (Neutral). • Place the transfer case lever in N (Neutral). • The maximum recommended distance is unlimited. • The vehicle must be to...

STARTING Positions of the ignition 1. Off — locks the automatictransmission gearshift lever andallows key removal. Note: In order to switch off the engine while thevehicle is in motion, shift to neutraland use the brakes to bring thevehicle to a safe stop. After thevehicle has stopped, turn the engi...

Starting the engine 1. Turn the key to 3 (on) withoutturning the key to 4 (start). 2. Turn the key to 4 (start), thenrelease the key as soon as theengine begins cranking. Your vehiclehas a computer assisted crankingsystem that assists in starting theengine. After releasing the key fromthe 4 (start) ...

If you should experience cold weather starting problems on E 85 ethanol, and neither an alternative brand of E 85 ethanol nor an engine block heater is available, the addition of unleaded gasoline to your tank willimprove cold starting performance. Your vehicle is designed to operateon E 85 ethanol ...

• Finally, have the engine block heater system checked during your falltune-up to be sure it’s in good working order. How to use the engine block heater Ensure the receptacle terminals are clean and dry prior to use. To cleanthem, use a dry cloth. Depending on the type of factory installed equipment...

Using ABS When hard braking is required, apply continuous force on the brakepedal. Do not pump the brake pedal since this will reduce theeffectiveness of the ABS and will increase your vehicle’s stoppingdistance. The ABS will be activated immediately, allowing you to retainsteering control during ha...

Electronic stability control (ESC) Electronic stability control (ESC) may enhance your vehicle’s directionalstability during adverse maneuvers, for example when cornering severelyor avoiding objects in the roadway. ESC operates by applying brakes toone or more of the wheels individually and, if nece...

During trailer sway control events, the stability control light in theinstrument cluster will flash momentarily. The message center will alsodisplay TRAILER SWAY REDUCE SPEED. In some cases when trailer sway is detected, the vehicle speed is too high and may be above a speedat which trailer sway wil...

Utility vehicles and trucks have larger tires and increased groundclearance, giving the vehicle a higher center of gravity than a passengercar. WARNING: Vehicles with a higher center of gravity such as utility vehicles and trucks handle differently than vehicles with a lower center of gravity. Utili...

5. With the ignition in the onposition, pull back on the BSIsolenoid found on top of theuncovered steering column and atthe same time, apply the brakepedal and shift the transmission intoN (Neutral). 6. Reinstall the steering column cover, start the vehicle and release theparking brake. Note: After ...

AUTOMATIC TRANSMISSION OPERATION Understanding the shift positions of the 6-speed automatictransmission This vehicle is equipped with an adaptive transmission shift strategy. Theadaptive transmission shift strategy offers the optimal transmissionoperation and shift quality. When the engine is turned...

To deactivate the tow/haul feature and return to normal driving mode,press the button on the end of the gearshift lever. The TOW HAUL lightwill no longer be illuminated. Tow/haul will also deactivate when thevehicle is powered down. WARNING: Do not use the tow/haul feature when driving in icy or sli...

PRS (Progressive RangeSelection) With the gearshift lever in D(Drive), press the – button to activePRS. The available and selectedgears will be indicated on theinstrument cluster. All available gears will be displayed with the current gear indicated.Press the – button again to lock out gears beginni...

Recommended shift speeds Upshift according to the following chart: Upshifts when accelerating Shift from: 1 – 2 15 mph (24 km/h) 2 – 3 25 mph (40 km/h) 3 – 4 40 mph (64 km/h) 4 – 5 45 mph (72 km/h) 5 – 6 50 mph (80 km/h) In order to prevent the engine from running at too low an RPM, whichmay cause i...

Keep the RSS sensors (located on the rear bumper/fascia) freefrom snow, ice and large accumulations of dirt (do not clean thesensors with sharp objects). If the sensors are covered, it willaffect the accuracy of the RSS.If your vehicle sustains damage to the rear bumper/fascia, leavingit misaligned ...

Visual park aid alert (if equipped) Visual park aid alert allows the driver to see the area that is causing thereverse sensing system to beep. The visual alerts are red, yellow or greenhighlights which appear on top of the video image when an object isdetected by the reverse sensing system. The visu...

When towing, the reverse camera system will only see what is beingtowed behind the vehicle. This might not provide adequate coverage as itusually provides in normal operation and some objects might not beseen. Fixed guidelines and visual park aid alert features are only availablewhen the vehicle is ...

Press and on the steering wheel controls to select a zoomoption. You can choose from OFF,Level 1, Level 2 and Level 3. Usethe OK button to make a selection.When activating manual zoom mode,the system will always start fromOFF. The manual zoom feature is not available on vehicles equipped arearview m...

• If the image is not clear, then check if there is anything covering thelens such as dirt, mud, ice, snow, etc. If the image is still not clearafter cleaning, have your system inspected by your authorized dealer. BLIND SPOT MIRRORS (IF EQUIPPED) Blind spot mirrors have a convex spotter mirror built...

FOUR-WHEEL DRIVE (4WD) OPERATION (IF EQUIPPED) WARNING: For important information regarding safe operation of this type of vehicle, see Preparing to drive your vehicle in this chapter. Four–wheel drive (4WD) supplies power to all four wheels. 4WD shouldnot be operated on dry pavement; driveline dama...

Activating the electronic locking differential (ELD) The ELD can be turned on bypulling the knob on the 4WD controltoward you while the control is ineither 4H (4X4 high) or 4L (4X4low) mode. Once the knob is pulled, thelight located on the control willblink for approximately two secondsand then it w...

• It may be safer to stay on the apron or shoulder of the road and slowdown gradually before returning to the pavement. You may losecontrol if you do not slow down or if you turn the steering wheel toosharply or abruptly. • It often may be less risky to strike small objects, such as highwayreflector...

Emergency maneuvers • In an unavoidable emergency situation where a sudden sharp turnmust be made, remember to avoid “over-driving” your vehicle, i.e.,turn the steering wheel only as rapidly and as far as required to avoidthe emergency. Excessive steering will result in less vehicle control,not more...

Mud and water If you must drive through highwater, drive slowly. Traction orbrake capability may be limited. When driving through water,determine the depth; avoid waterhigher than the bottom of the hubs(if possible) and proceed slowly. Ifthe ignition system gets wet, thevehicle may stall. Once throu...

Driving on hilly or sloping terrain Although natural obstacles may make it necessary to travel diagonally upor down a hill or steep incline, you should always try to drive straight upor straight down. Avoid driving crosswise or turning on steep slopes or hills . A danger lies in losing traction, sli...

Driving on snow and ice 4WD vehicles have advantages over 2WD vehicles in snow and ice butcan skid like any other vehicle. Should you start to slide while driving on snowy or icy roads, turn thesteering wheel in the direction of the slide until you regain control. Avoid sudden applications of power ...

Any modifications to a vehicle that raise the center of gravity can makeit more likely the vehicle will roll over as a result of a loss of control.Ford Motor Company recommends that caution be used with any vehicleequipped with a high load or device (such as ladder racks or pickup boxcover). Failure...

ROADSIDE ASSISTANCE Vehicles sold in the U.S. : Getting roadside assistance To fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program. Thisprogram is separate from the New Vehicle Limited Warranty. The serviceis available: • 24-hours,...

Vehicles sold in the U.S. : Using roadside assistance Complete the roadside assistance identification card and place it in yourwallet for quick reference. In the United States, this card is found in theOwner Guide portfolio in the glove compartment. In Canada, the card isfound in the Warranty Guide ...

FUEL PUMP SHUT-OFF In the event of a moderate to severe collision, this vehicle is equippedwith a fuel pump shut-off feature that stops the flow of fuel to theengine. Not every impact will cause a shut-off. Should your vehicle shut off after a collision due to this feature, you mayrestart your vehic...

Standard fuse amperage rating and color COLOR Fuse rating Mini fuses Standard fuses Maxi fuses Cartridge maxi fuses Fuse link cartridge 2A Grey Grey — — — 3A Violet Violet — — — 4A Pink Pink — — — 5A Tan Tan — — — 7.5A Brown Brown — — — 10A Red Red — — — 15A Blue Blue — — — 20A Yellow Yellow Yellow ...

WARNING: To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs. If the battery has been disconnected and reconnected, refer to the Battery section of the Maintenance and Specifications chapter. The hig...

CHANGING THE TIRES If you get a flat tire while driving, do not apply the brake heavily.Instead, gradually decrease your speed. Hold the steering wheel firmlyand slowly move to a safe place on the side of the road. Note: If your vehicle is equipped with the tire pressure monitoring system (TPMS), th...

The usage of a full-size dissimilar spare tire/wheel can lead toimpairment of the following: • Handling, stability and braking performance • Comfort and noise • Ground clearance and parking at curbs • Winter weather driving capability • Wet weather driving capability • All-wheel driving capability (...

Location of the spare tire and tools The spare tire is located under the vehicle, just forward of the rearbumper. The jack, jack handle and lug wrench are located in thefollowing locations: Body Style Location Regular Cab Attached to a floor bracketbehind/under the driver’s seat (foreasier access mo...

2. Fully insert the jack handlethrough the bumper hole and intothe guide tube through the accesshole in the rear bumper. 3. Turn the handle counterclockwise until tire is lowered to the ground,the tire can be slid rearward and the cable is slightly slack.4. Slide the retainer through the center of t...

3. Turn the jack handle clockwise until the tire is raised to its stowedposition underneath the vehicle. The effort to turn the jack handleincreases significantly and the spare tire carrier ratchets or slips whenthe tire is raised to the maximum tightness. Tighten to the best of yourability, to the ...

Note: Inspect the wheel pilot hole prior to installation. If there isvisible corrosion in wheel pilot hole,remove loose particles by wipingwith clean rag and apply grease.Apply grease only to the wheel pilothole surface by smearing a “dime”(1 square cm) sized glob of greasearound the wheel pilot sur...

Preparing your vehicle When the battery is disconnected or a new battery is installed, theautomatic transmission must relearn its shift strategy. As a result, thetransmission may have firm and/or soft shifts. This operation isconsidered normal and will not affect function or durability of thetransmi...

1. Connect the positive (+) jumpercable to the positive (+) terminal ofthe discharged battery. 2. Connect the other end of thepositive (+) cable to the positive(+) terminal of the assisting battery. 3. Connect the negative (-) cable tothe negative (-) terminal of theassisting battery. 4. Make the fi...

Removing the jumper cables Remove the jumper cables in the reverse order that they wereconnected. Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. 1. Remove the jumper cable fromthe ground metal surface. 2. Remove the jumper cable on thenega...

WRECKER TOWING If you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, yourroadside assistance service provider. Ford recommends your vehicle be towed with a wheel lift or flatbed. Donot tow with a slingbelt. Ford Motor C...

Emergency towing In case of a roadside emergency with a disabled vehicle (without accessto wheel dollies, car hauling trailer, or flatbed transport vehicle) yourvehicle (regardless of transmission powertrain configuration) can be flattowed (all wheels on the ground) under the following conditions: •...

GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorizeddealer. While any authorized dealer handling your vehicle line willprovide warranty service, we recommend you return to your sellingauthorized dealer who wants to ensure your continued satisfaction. Plea...

In Canada: Mailing address (Ford vehicles) Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E4 Telephone 1-800-565-3673 (FORD) Online www.ford.ca Mailing address (Lincoln vehicles) Lincoln CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oak...

You can get more information by calling BBB AUTO LINE at1-800-955-5100, or writing to: BBB AUTO LINE4200 Wilson Boulevard, Suite 800Arlington, Virginia 22203–1833 BBB AUTO LINE applications can also be requested by calling the FordMotor Company Customer Relationship Center at 1-800-392-3673. Note: F...

WASHING THE EXTERIOR Wash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft 威 Detail Wash (ZC-3-A), which is available from your authorized dealer. • Never use strong household detergents or soap, such as dish washingor laundry liquid. These products can ...

ENGINE Engines are more efficient when they are clean because grease and dirtbuildup keep the engine warmer than normal. When washing: • Take care when using a power washer to clean the engine. Thehigh-pressure fluid could penetrate the sealed parts and causedamage. • Do not spray a hot engine with ...

3.5L Ecoboost™ engine PLASTIC (NON-PAINTED) EXTERIOR PARTS Use only approved products to clean plastic parts. These products areavailable from your authorized dealer. • For routine cleaning, use Motorcraft 威 Detail Wash (ZC-3-A). • If tar or grease spots are present, use Motorcraft 威 Bug and Tar Rem...

• The wiper blades can be cleaned with isopropyl (rubbing) alcohol orMotorcraft 威 Premium Windshield Washer Concentrate (ZC-32-A) in the U.S., or Premium Quality Windshield Washer Fluid [CXC-37-(A, B,D, or F)] in Canada, available from your authorized dealer. Thiswasher fluid contains special soluti...

If a staining liquid like coffee/juice has been spilled on the instrumentpanel or on interior trim surfaces, clean as follows: 1. Wipe up spilled liquid using a clean, white, cotton cloth. 2. Wipe the surface with a damp, clean, white cotton cloth. For morethorough cleaning, use a mild soap and wate...

LEATHER SEATS(IF EQUIPPED, EXCEPT FOR THE KING RANCH 姞 EDITION) For King Ranch 威 leather seats, refer to a separate section in this chapter. • Clean spills and stains as quickly as possible. • For routine cleaning, wipe the surface with a soft, damp cloth. Formore thorough cleaning, wipe the surface...

Scratches Natural Markings - Because the leather in the seat comes from genuinesteer hides, there will be evidence of naturally occurring markings, suchas small scars. These markings give character to the seating covers andshould be considered as proof of a genuine leather product. In order to lesse...

FORD AND LINCOLN CAR CARE PRODUCTS Your Ford or Lincoln authorized dealer has many quality productsavailable to clean your vehicle and protect its finishes. These qualityproducts have been specifically engineered to fulfill your automotiveneeds; they are custom designed to complement the style andap...

SERVICE RECOMMENDATIONS To help you service your vehicle, we provide scheduled maintenance information which makes tracking routine service easy. If your vehicle requires professional service, your authorized dealer canprovide the necessary parts and service. Check your Warranty Guide to find out wh...

OPENING THE HOOD 1. Inside the vehicle, pull the hoodrelease handle located under thebottom of the instrument panel. 2. Go to the front of the vehicle and release the auxiliary latch that islocated on the front bumper under the grill. 3. Lift the hood until the lift cylinders hold it open. Maintenan...

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT 3.7L V6 engine 1. Windshield washer fluid reservoir 2. Battery 3. Engine oil dipstick (out of view) 4. Brake fluid reservoir 5. Engine coolant reservoir 6. Air filter assembly 7. Engine oil filler cap (out of view) 8. Power distribution box 1 2 3 4 5 ...

3.5L V6 EcoBoost™ engine 1. Windshield washer fluid reservoir 2. Battery 3. Engine oil filler cap 4. Engine oil dipstick 5. Brake fluid reservoir 6. Engine coolant reservoir 7. Air filter assembly 8. Power distribution box 1 2 3 5 6 7 8 4 Maintenance and Specifications 374 2011 F-150 (f12) Owners Gu...

WINDSHIELD WASHER FLUID Add fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely. Only use a washer fluid that meetsFord specifications. Do not use anyspecial washer fluid such aswindshield water repellent type fluidor bug wash. They may causesque...

To prolong the life of the wiper blades, it is highly recommended toscrape off the ice on the windshield before turning on the wipers. Thelayer of ice has many sharp edges and can damage the micro edge of thewiper rubber element. ENGINE OIL Checking the engine oil Refer to the scheduled maintenance ...

2. If the engine oil level is not within the normal range, add only certifiedengine oil of the recommended viscosity. Remove the engine oil filler capand use a funnel to pour the engine oil into the opening. 3. Recheck the engine oil level. Make sure the oil level is not above thenormal operating ra...

Change your engine oil according to the appropriate schedule listed inthe scheduled maintenance information. Ford production and Motorcraft 威 replacement oil filters are designed for added engine protection and long life. If a replacement oil filter is usedthat does not meet Ford material and design...

It is recommended you use the appropriate Motorcraft 威 oil filter or another with equivalent performance for your engine application. BATTERY Your vehicle is equipped with aMotorcraft 威 maintenance-free battery which normally does notrequire additional water during itslife of service. If your batter...

WARNING: Keep batteries out of reach of children. Batteries contain sulfuric acid. Avoid contact with skin, eyes or clothing. Shield your eyes when working near the battery to protect againstpossible splashing of acid solution. In case of acid contact with skin oreyes, flush immediately with water f...

If the battery has been disconnected or a new battery has been installed,the clock and radio settings must be reset once the battery isreconnected. • Always dispose of automotivebatteries in a responsible manner.Follow your local authorizedstandards for disposal. Call yourlocal authorized recycling ...

in some cases after charging battery with the external charger, the BMSrequires eight hours of vehicle sleep time (key off with doors closed) torelearn the new battery state of charge. Prior to relearning the state ofcharge, the BMS may disable electrical features (to protect the battery)earlier tha...

If the engine coolant has not been checked at the recommended interval,the engine coolant reservoir may become low or empty. If the reservoir islow or empty, add engine coolant to the reservoir. Refer to Adding engine coolant in this chapter. Note: Automotive fluids are not interchangeable; do not u...

• Do not add extra inhibitors or additives to the coolant. These can be harmful and compromise the corrosion protection of the enginecoolant. For vehicles with overflow coolant systems with a non-pressurized capon the coolant recovery system, add coolant to the coolant recoveryreservoir when the eng...

If you have to add more than 1.0 quart (1.0 liter) of engine coolant permonth, have your authorized dealer check the engine cooling system.Your cooling system may have a leak. Operating an engine with a lowlevel of coolant can result in engine overheating and possible enginedamage. Recycled engine c...

When fail-safe mode is activated You have limited engine power when in the fail-safe mode, so drive thevehicle with caution. The vehicle will not be able to maintain high speedoperation and the engine will run rough. Remember that the engine iscapable of completely shutting down automatically to pre...

WARNING: Flexible fuel components and standard unleaded gasoline fuel components are not interchangeable. If your vehicle is not serviced in accordance with flexible fuel vehicles procedures,damage may occur and your warranty may be invalidated. WARNING: When refueling always shut the engine off and...

• DO NOT use a device that would hold the fuel pump handle in the fillposition. Easy Fuel 姞 “no cap” fuel system Your fuel tank is equipped with an Easy Fuel 威 “no cap” fuel filler system. This allows you to simply open the fuel filler door and insert the fuelfiller nozzle into the fuel system. The ...

WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler door (Easy Fuel 威 “no cap” fuel system), do not refuel until the sound stops. Otherwise, fuel mayspray out, which could cause serious personal injury. Flex fuel vehicle (FFV) fuel fill inlet If your vehi...

Some stations offer fuels posted as ⬙ Regular ⬙ with an octane rating below 87, particularly in highaltitude areas. Fuels with octanelevels below 87 are notrecommended for either engine. Do not be concerned if your enginesometimes knocks lightly. However, if it knocks heavily while you areusing fuel...

Do not add aftermarket fuel additive products to your fuel tank. Itshould not be necessary to add any aftermarket products to your fueltank if you continue to use high quality fuel of the recommended octanerating. These products have not been approved for your engine andcould cause damage to the fue...

ESSENTIALS OF GOOD FUEL ECONOMY Measuring techniques Your best source of information about actual fuel economy is you, thedriver. You must gather information as accurately and consistently aspossible. Fuel expense, frequency of fill-ups or fuel gauge readings areNOT accurate as a measure of fuel eco...

Calculating fuel economy 1. Fill the fuel tank completely and record the initial odometer reading(in miles or kilometers). 2. Each time you fill the tank, record the amount of fuel added (ingallons or liters). 3. After at least three to five tank fill-ups, fill the fuel tank and recordthe current od...

EMISSION CONTROL SYSTEM Your vehicle is equipped with various emission control components and acatalytic converter which will enable your vehicle to comply withapplicable exhaust emission standards. To make sure that the catalyticconverter and other emission control components continue to workproper...

POWER STEERING FLUID (6.2L V8 ENGINE ONLY) Check the power steering fluid. Refer to scheduled maintenance information. 1. Start the engine and let it rununtil it reaches normal operatingtemperature (the engine coolanttemperature gauge indicator will benear the center of the normal areabetween H and ...

TRANSMISSION FLUID Checking 6-speed automatic transmission fluid The automatic transmission does not have a transmission fluid dipstick. Refer to your scheduled maintenance information for scheduled intervals for fluid checks and changes. Your transmission does notconsume fluid. However, the fluid l...

AIR FILTER Refer to scheduled maintenance information for the appropriate intervals for changing the air filter element. When changing the air filter element, use only the air filter elementlisted. Refer to Motorcraft 威 part numbers in this chapter. WARNING: To reduce the risk of vehicle damage and/...

8. Replace the air filter housingcover and secure the clamps. Becareful not to crimp the filterelement edges between the air filterhousing and cover and ensure thatthe tabs on the edge are properlyaligned into the slots. 9. Slip the air tube onto the air filterhousing and tighten the air-tubeclamp b...

VEHICLE STORAGE If you plan on storing your vehicle for an extended period of time(30 days or more), refer to the following maintenance recommendationsto ensure your vehicle stays in good operating condition. All motor vehicles and their components were engineered and tested forreliable, regular dri...

Note: During extended periods of vehicle storage (30 days or more), fuel may deteriorate due to oxidation. Add a quality gas stabilizerproduct to the vehicle fuel system whenever actual or expected storageperiods exceed 30 days. Follow the instructions on the additive label.The vehicle should then b...

• Check tire pressures and set tire inflation per the Tire Label. • Check brake pedal operation. Drive the vehicle 15 ft (4.5 meters) backand forth to remove rust build-up. • Check fluid levels (including coolant, oil and gas) to make sure thereare no leaks, and fluids are at recommended levels. • I...

6.2L engine 3.5L EcoBoost™ engine IDENTIFYING YOUR VEHICLE Safety Compliance Certification Label The National Highway Traffic SafetyAdministration Regulations requirethat a Safety ComplianceCertification Label be affixed to avehicle and prescribe where theSafety Compliance CertificationLabel may be ...

FORD CUSTOM ACCESSORIES FOR YOUR VEHICLE A wide selection of Ford Custom Accessories are available for yourvehicle through your local Ford or Ford of Canada dealer. These qualityaccessories have been specifically engineered to fulfill your automotiveneeds; they are custom designed to complement the ...

• Towing mirrors • Rear seat entertainment* • Portable navigation* • Trailer brake controller • Bed extender • Hitch ball and towbars • Tonneau covers* • Interior cargo organization and management • Truck bed cargo organization and management • Trailer hitches, wiring harnesses and accessories Peace...

FORD ESP EXTENDED SERVICE PLANS (U.S. ONLY) More than 30 million Ford and Lincoln owners have discovered thepowerful protection of Ford ESP. It is the only extended service planbacked by Ford Motor Company, and provides “peace of mind”protection beyond the New Vehicle Limited Warranty coverage. Up t...

FORD ESP EXTENDED SERVICE PLANS (CANADA ONLY) You can get more protection for your vehicle by purchasing a FordExtended Service Plan (ESP). Ford ESP is the only service contractbacked by Ford Motor Company of Canada, Limited. Depending on theplan you purchase, Ford ESP provides benefits such as: • R...

GENERAL MAINTENANCE INFORMATION Why maintain your vehicle? This guide describes the scheduled maintenance required for yourvehicle. Carefully following this schedule helps protect against majorrepair expenses resulting from neglect or inadequate maintenance andmay also help to increase the value of ...

Genuine Ford parts and service When planning your maintenance services, consider your dealership forall your vehicle’s needs. There are a lot of reasons why visiting your dealership for all yourservice needs is a great way to help keep your vehicle running great. Convenience Many dealerships have ex...

NORMAL SCHEDULED MAINTENANCE AND LOG 3.5L, 3.7L and 5.0L engines For your convenience, your vehicle is equipped with a message centerwhich determines the proper oil change service interval. You shouldperform the engine oil change as indicated by the message center. Themessage center will display ENG...

3.5L, 3 .7L and 5 .0L engines Oil Change S ervice Interval* 1 23456789 1 0 1 1 1 2 1 3 1 4 1 5 Change engine oil and filter • •••••••••••••• Rotate tires, inspect tire wear and measure tread depth • •••••••••••••• Inspect wheels and related components for abnormal noise, wear , looseness or drag • •...

Every 150,000 miles(240,000 km) Change automatic transmission fluid and filter(except 5–speed TorqShift 威 transmission) (filter not required on 6F35, 6F50, DPS6 and AWF-21transmissions); consult dealer for requirements Change front axle fluid (4WD vehicles) Change manual transmission fluid (Escape) ...

Maintenance schedule log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ...

SPECIAL OPERATING CONDITIONS - 3.5L, 3.7L AND 5.0L ENGINES If you operate your vehicle primarily in one of the more demanding conditions listed below, you will need to have some items maintainedmore frequently. If you only occasionally operate your vehicle under these conditions, it is not necessary...

Extensive idling and/or low-speed driving for long distances as in heavy commercial use such as delivery, taxi, patrol car or livery - 3.5L, 3.7L and 5.0L engines As required – Change engine oil and filter as indicated by messagecenter and perform services listed in the NormalScheduled Maintenance c...

Operating in dusty conditions such as unpaved or dusty roads - 3.5L, 3.7L and 5.0L engines Inspect frequently, service as required – Replace cabin air filter (if equipped) – Replace engine air filter Every 5,000 miles (8,000 km) or 6 months – Change engine oil and filter – Inspect wheels and related...

Exclusive use of E85 (Flex Fuel Vehicles only) - 3.5L, 3.7L and 5.0L engines Every oil change interval – If ran exclusively on E85, fill the fuel tank full withregular unleaded fuel SPECIAL OPERATING CONDITIONS - 6.2L ENGINE(HARLEY-DAVIDSON™, LARIAT LIMITED AND SVT RAPTOR) If you operate your vehicl...

Extensive idling and/or low-speed driving for long distances as in heavy commercial use such as delivery, taxi, patrol car or livery - 6.2L engine (Harley-Davidson™, Lariat Limited and SVT Raptor) Inspect frequently, service as required – Replace cabin air filter (if equipped) – Replace engine air f...

Operating in dusty conditions such as unpaved or dusty roads - 6.2L engine (Harley-Davidson™, Lariat Limited and SVT Raptor) Inspect frequently, service as required – Replace cabin air filter (if equipped) – Replace engine air filter Every 5,000 miles (8,000 km) – Inspect the wheels and related comp...

Special operating condition log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D A...

EXCEPTIONS In addition, there are several exceptions to the Normal Schedule. Theyare listed below: Normal vehicle axle maintenance ❑ Rear axles and power take-off (PTO) units containing synthetic fluid and light duty trucks equipped with Ford-design axlesare lubricated for life. These fluids are not...

ENGINE COOLANT CHANGE RECORD 3.5L, 3.7L and 5.0L engines Initial change 6 years or 100,000 miles (160,000 km)(whichever comes first) After initial change Every 3 years or 50,000 miles (80,000 km) 6.2L engine (Harley-Davidson™, Lariat Limited and SVT Raptor) Initial change 6 years or 105,000 miles (1...

Engine coolant change log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE : M...

A Accessory delay ........................103 AdvanceTrac ..............................280 Airbag supplemental restraintsystem ................189–190, 197, 200 and child safety seats ............191description ..............190, 197, 200disposal ....................................203driver airbag...

Engine ........................................415 cleaning ...................................358coolant .....................................382fail-safe cooling .......................386idle speed control ...................379lubrication specifications .......411refill capacities .................

O Octane rating ....................393–394 Oil (see Engine oil) ..................376 P Parental MyKeyprogramming .............................133 Parking brake ............................279 Parts (see Motorcraft 威 parts) ..410 Passenger OccupantClassification Sensor .................174 Pedals (...

Transmission .............................293 brake-shift interlock(BSI) ................................289, 291fluid, checking and adding(automatic) .............................404fluid, refill capacities ..............411lubricant specifications ..........411 Turn signal ...........................