Ford 2010 Crown Victoria v.2- Manuals

Warning symbols on your vehicle When you see this symbol, it isimperative that you consult therelevant section of this guide beforetouching or attempting adjustmentof any kind. Protecting the environment We must all play our part inprotecting the environment. Correctvehicle usage and the authorizedd...

Do not add friction modifier compounds or special break-in oils sincethese additives may prevent piston ring seating. See Engine oil in the Maintenance and Specifications chapter for more information on oil usage. SPECIAL NOTICES New Vehicle Limited Warranty For a detailed description of what is cov...

through a direct connection to your vehicle when diagnosing or servicingyour vehicle. For U.S. only (if equipped), if you choose to use the SYNC 威 Vehicle Health Report, you consent that certain diagnostic informationmay also be accessed electronically by Ford Motor Company and Fordauthorized servic...

911 operators to provide the most appropriate emergencyservices. If you do not want to disclose this information, do notactivate the feature. See your SYNC 威 supplement for more information. Additionally, when you connect to Traffic, Directionsand Information (if equipped, U.S. only), the service us...

These are some of the symbols you may see on your vehicle. Vehicle Symbol Glossary Safety Alert See Owner’s Guide Fasten Safety Belt Airbag - Front Airbag - Side Child Seat LowerAnchor Child Seat TetherAnchor Brake System Anti-Lock Brake System Parking Brake System Brake Fluid -Non-Petroleum Based P...

WARNING LIGHTS AND CHIMES Standard instrument cluster Optional instrument cluster Warning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause expensive repairs. A warning light mayilluminate when a problem exists with one of your vehicle’s functions.Many lig...

Brake system warning light: To confirm the brake system warninglight is functional, it willmomentarily illuminate when theignition is turned to the on positionwhen the engine is not running, or in a position between on and start, orby applying the parking brake when the ignition is turned to the onp...

Charging system: Illuminates when the battery is not charging properly.If it stays on while the engine isrunning, there may be a malfunctionwith the charging system. Contact your authorized dealer as soon aspossible. This indicates a problem with the electrical system or a relatedcomponent. Engine o...

Low tire pressure warning: Illuminates when your tire pressureis low. If the light remains on atstart up or while driving, the tirepressure should be checked. Referto Inflating your tires in the Tires, Wheels and Loading chapter. When the ignition is first turned to on, the light will illuminate for...

Turn signal: Illuminates when the left or right turn signal or thehazard lights are turned on. If theindicators stay on or flash faster, check for a burned out bulb. High beams: Illuminates when the high beam headlamps are turned on. Headlamps on warning chime: Sounds when the headlamps or parking l...

Engine coolant temperaturegauge: Indicates engine coolant temperature. At normal operatingtemperature, the needle will be inthe normal range (between “H” and“C”). If it enters the red section, the engine is overheating. Stopthe vehicle as soon as safelypossible, switch off the engine and let the eng...

The DTE function will display FUEL LEVEL LOW and sound a tone forone second when you have approximately 50 miles (80 km) to empty. Ifyou RESET this warning message, this display and tone will returnwithin 10 minutes or 10 miles (16 km). DTE is calculated using a running average fuel economy, which i...

UNITS Displays the current units English or Metric. Press SELECT to change the display units. • ENGLISH • METRIC LANGUAGE Displays the current language selected. Press SELECT to change the display language. • ENGLISH • ESPANOL • FRANCAIS COMPASS (if equipped) The compass reading may be affected when...

Compass zone/calibration adjustment 1. Determine your magnetic zone byreferring to the zone map. 2. Turn ignition to the on position. 3. Start the engine. 4. Press SETUP to reach theCompass/Odometer function. 5. Press SELECT to show COMPASSZONE <XX> PRESS SELECT TOCHANGE. 6. Press the SELECT c...

System warnings System warnings alert you to possible problems or malfunctions in yourvehicle’s operating systems. In the event of a multiple warning situation, the message center willcycle the display to show all warnings by displaying each one for fourseconds. The message center will display the l...

AUDIO SYSTEMS AM/FM stereo (if equipped) WARNING: Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device that may take theirfocus off the road. The driver’s primary responsibility is the saf...

3. AM/FM: Press to choose a frequency band in radio mode. 4. Memory preset buttons: To set a station: Select frequency bandAM/FM; tune to a station, press andhold a preset button until sound returns. 5. Power/volume: Press to turn ON/OFF; turn to increase ordecrease volume levels. 6. Tone: Press TON...

the system will store the last one in the remaining presets. Whenactivated, AUTOSET will momentarily appear in the display when any ofthe preset controls are pressed. Compression: Brings soft and loud CD passages together for a more consistent listening level when in CD mode. Press MENU until compre...

7. MENU: Press MENU repeatedly to access RDS ON/OFF. PressSEL-TEXT to switch RDS ON or OFF. Press MENU again to access Program type mode or ShowType/Name mode. (MENU must be pressed within 10 seconds to proceedto the next RDS mode.) The Federal Communications Commission (FCC) and the Canadian Radioa...

remaining presets. When activated, AUTOSET will momentarily appear inthe display when any of the preset controls are pressed. Speed sensitive volume: Radio volume changes automatically and slightly with vehicle speed to compensate for road and wind noise.Recommended level is 1–3. Level 0 turns the f...

3. TUNE/CAT: Press to manually go up or down the radio frequency. TEXT is only available whenequipped with Satellite radio. Your system may be equipped withSatellite ready capability. The kit to enable Satellite reception is availablethrough your dealer. Detailed Satellite instructions are included ...

13. AM/FM: Press repeatedly to switch between AM/FM1/FM2 mode. 14. CD: Press to enter CD mode. Press CD and a preset to select aspecific CD to play. 15. SAT: Your system may be equipped with Satellite Ready capability. The kit to enable the Satellite reception is available through yourauthorized dea...

• Allow tapes which have been subjected to extreme heat, humidity orcold to reach a moderate temperature before playing. • Clean the cassette player head with a cassette cleaning cartridge after10–12 hours of play to maintain good sound/operation. Don’t: • Expose tapes to direct sunlight, extreme hu...

MANUAL HEATING AND AIR CONDITIONING SYSTEM(IF EQUIPPED) 1. Fan speed adjustment: Controls the volume of air circulated in thevehicle. 2. Temperature selection: Controls the temperature of theairflow in the vehicle. 3. Air flow selections: Controls the direction of the airflow in thevehicle. See the ...

During extreme high ambient temperatures when idling stationary forextended periods of time in gear, it is recommended to run the A/C inthe MAX A/C position reduce blower fan speed from the highest settingand put the vehicle’s transmission into the park gear position to continueto receive cool air f...

• Remove any snow, ice or leaves from the air intake area at the base ofthe windshield. During extreme high ambient temperatures when idling stationary forextended periods of time in gear, it is recommended to run the A/C inthe MAX A/C position reduce blower fan speed from the highest settingand put...

HEADLAMP CONTROL Turns the lamps off. Turns on the parking lamps, instrument panel lamps,license plate lamps and tail lamps. Turns the headlamps on. Autolamp control (if equipped) The autolamp system provides lightsensitive automatic on-off control ofthe exterior lights normallycontrolled by the hea...

Fog lamp control (if equipped) With the ignition on, the fog lampscan be turned on when theheadlamp control is pulled towardyou and is in any of the followingpositions: • Parking lamps • Low beams • Autolamps (when active) Fog lamps will turn off when thehigh beams are activated. High beams Push the...

WARNING: Always remember to turn on your headlamps at dusk or during inclement weather. The Daytime Running Light (DRL) System does not activate your tail lamps and generally may notprovide adequate lighting during these conditions. Failure to activateyour headlamps under these conditions may result...

8. Locate the horizontal adjuster foreach headlamp. Turn it clockwise orcounterclockwise and place the leftedge of the high intensity area evenwith the vertical line correspondingto the headlamp under adjustment. Vertical aim adjustment (Grand Marquis only) 1. Park the vehicle directly in front of a...

To see a clearer light pattern foradjusting, you may want to blockthe light from one headlamp whileadjusting the other. 5. Locate the vertical adjuster oneach headlamp. Using a 4 mmwrench, turn the adjuster eitherclockwise (to adjust down) orcounterclockwise (to adjust up).The horizontal edge of the...

If equipped with remote keyless entry, the courtesy lamp will illuminatewhenever any door is opened and will remain on for 25 seconds after thedoor is shut or when the ignition is turned to the on position. Rear courtesy/reading lamps (if equipped) Rotate the lens to illuminate thelamp. With the len...

Replacing headlamp bulbs (Crown Victoria only) To remove the headlamp bulb: 1. Make sure the headlamp switch is in the off position, then open thehood. 2. Remove the radiator cover by turning the three retainers to the unlockposition. 3. Remove the two retainers andpull headlamp assembly forward toe...

To install the new bulb: WARNING: Handle a halogen headlamp bulb carefully and keep out of children’s reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause thebulb to break the next time the headlamps are operated. Note: If the bulb is accident...

Replacing tail/brake/turn signal lamp bulbs The tail lamp and brake/turn signal lamp bulbs are located in the taillamp assembly. Follow the same steps to replace either bulb. 1. Make sure the headlamp switch isin the off position, then open thetrunk and remove the retainer. 2. Carefully pull the car...

3. Carefully pull the bulb socket outof the lamp assembly. 4. Pull the bulb straight out of thesocket and push in the new bulb. To install, reverse the removalprocedure. Replacing headlamp bulbs (Grand Marquis only) To remove the headlamp bulb: 1. Make sure the headlamp control is in the off positio...

WARNING: Handle a halogen headlamp bulb carefully and keep out of children’s reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause thebulb to break the next time the headlamps are operated. Note: If the bulb is accidentally touched, it should b...

MULTI-FUNCTION LEVER Windshield wiper: Rotate the end of the control away from you toincrease the speed of the wipers;rotate towards you to decrease thespeed of the wipers. Windshield washer: Press the end of the stalk: • briefly: causes a single swipe ofthe wipers without washer fluid. • a quick pr...

TILT STEERING WHEEL To adjust the steering wheel: 1. Pull and hold the steering wheelrelease control toward you. 2. Move the steering wheel up ordown until you find the desiredlocation. 3. Release the steering wheelrelease control. This will lock thesteering wheel in position. WARNING: Never adjust ...

Accessory delay With accessory delay, the power window switches and radio may be usedfor up to 10 minutes after the ignition switch is turned off or until anydoor is opened. INTERIOR MIRROR The interior rear view mirror has two pivot points on the support armwhich lets you adjust the mirror up or do...

POWER ADJUSTABLE FOOT PEDALS (IF EQUIPPED) The accelerator and brake pedalshould only be adjusted when thevehicle is stopped and the gearshiftlever is in the P (Park) position. Press and hold the rocker control toadjust accelerator and brake pedal. • Press the right side of the control to adjust the...

Turning off speed control There are two ways to turn off the speed control: • Press the brake pedal. This willnot erase your vehicle’spreviously set speed. • Press the speed control OFFcontrol. Note: When you turn the speed control or the ignition off, yourspeed control set speed memory iserased. ST...

Climate control features • Press TEMP + or - to adjusttemperature. INTERIOR TRUNK CONTROL The remote trunk release control islocated on the driver’s door trimpanel and can be operated at anytime. You can render the switchinoperable by locking the buttonwith your master key. Driver Controls 75 2010 C...

KEYS The vehicle is equipped with a master key which will access the vehicle’sdoors, trunk, glove box, ignition and remote trunk release. POWER DOOR LOCKS • Press the control to unlock all doors. • Press the control to lock all doors. Smart locks (if equipped) With the key in any ignition position, ...

Autounlock The autounlock feature will unlock all doors when: • the ignition has been in the on position, all doors are closed, and thevehicle has been in motion at a speed greater than 12 mph (20 km/h), • the vehicle has then come to a stop and the ignition is turned to theaccessory or off position...

SECURICODE™ KEYLESS ENTRY SYSTEM (IF EQUIPPED) With the keyless entry keypad, youcan: • lock or unlock the vehicle doorswithout using the key. • open the trunk. See also Remote entry system in this chapter for more information. Your vehicle has a factory-set 5–digit code that operates the keylessent...

4. Press 3 • 4 to store the second personal code. 5. The doors will again lock then unlock to confirm programming of thenew code. To store a third personal code: 1. Enter the factory set code. 2. Within five seconds press 1 • 2 on the keypad to enter the programming mode. 3. Enter a third personal 5...

Locking doors with the keyless entry system It is not necessary to enter the factory-set code prior to locking all doors.To lock the doors, press 7 • 8 and press 9 • 0 at the same time. Note: The doors will not lock if the driver door is ajar. Anti-scan feature If the wrong code has been entered sev...

Immobilizer System PATS XCVR certification numbers Ghana SPLS / -485 / 2001 Guam (USA) See USA Jordan 4/U/U/4250 Kenya CCK/ES/100/0 Kuwait M.C/U.S.0 /5/7-12579 Mauritius TA/2005/15 Mayotte (F) Mexico RLVVIVP03-324 Morocco MR 1299 ANRT 2004 Netherlands Antilles (NL) Nicaragua NCG-CE-04-004 Northern M...

SEATING Adjustable head restraints WARNING: To minimize the risk of neck injury in the event of a crash, the driver and passenger occupants should not sit in and/or operate the vehicle, until the head restraint is placed in itsproper position. The driver should never adjust the head restraintwhile t...

Adjusting the front manual seat (if equipped) WARNING: Never adjust the driver’s seat or seatback when the vehicle is moving. WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. Lift handle to move seat forward orbackward. Pull lever up to adjust ...

WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. WARNING: Reclining the seatback can cause an occupant to slide under the seat’s safety belt, resulting in severe personal injuries in the event of a collision. To adjust the front seatback usingt...

Press to move the front portion ofthe seat cushion up or down. Press to move the rear portion ofthe seat cushion up or down. Using the power lumbar support (if equipped) The power lumbar control is locatedon the outboard side of the seat. Press one side of the control toadjust firmness. Press the ot...

Front passenger sensing system For airbags to do their job they must inflate with great force, and this forcecan pose a potentially deadly risk to occupants that are very close to theairbag when it begins to inflate. For some occupants, like infants inrear-facing child seats, this occurs because the...

Safety restraints precautions WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. WARNING: To reduce the risk of injury, make sure children sit in a rear seating position where they can be properly restrained. WARNING: Never let a passenger hold a...

WARNING: Safety belts and seats can become hot in a vehicle that has been closed up in sunny weather; they could burn a small child. Check seat covers and buckles before you place a childanywhere near them. WARNING: Front and rear seat occupants, including pregnant women, should wear safety belts fo...

Lap belts Adjusting the front center seat lap belt (if equipped) WARNING: The lap belt should fit snugly and as low as possible around the hips, not across the waist. The lap belt does not adjustautomatically. Insert the tongue intothe correct buckle (the buckleclosest to the direction the tongue is...

Webbing extraction sensitive mode The webbing sensitive locking mode locks the webbing and preventsmore belt from being pulled out if the belt is pulled out too quickly. Thebelt will unlock when you stop pulling on it. Automatic locking mode In this mode, the shoulder belt is pre-locked. The belt wi...

• Grasp the shoulder portion andpull downward until the entirebelt is pulled out. • Allow the belt to retract. As the belt retracts, you will hear a clickingsound. This indicates the safety belt is now in the automatic lockingmode. How to disengage the automatic locking mode WARNING: Ford Motor Comp...

Front safety belt height adjustment Your vehicle has safety belt heightadjustments for the driver and frontoutboard passenger. Adjust theheight of the shoulder belt so thebelt rests across the middle of yourshoulder. To lower the shoulder belt height,press the button and slide theheight adjuster dow...

If... Then... The driver’s or frontpassenger’s safety belt becomesunbuckled for approximatelyone minute while the vehicle istraveling at least 3 mph(5 km/h) and more than1-2 minutes have elapsed sincethe ignition switch has beenturned to on... The Belt-Minder 威 feature is activated - the safety belt...

Reasons given... Consider... “Traffic is light” Nearly 1 of 2 deaths occur insingle-vehicle crashes, many when no other vehicles are around. “Belts wrinkle my clothes” Possibly, but a serious crash can domuch more than wrinkle your clothes,particularly if you are unbelted. “The people I’m with don’t...

Deactivating/activating the Belt-Minder 姞 feature The driver and front passenger Belt-Minder 威 are deactivated/activated independently. When deactivating/activatingone seating position, do not buckle the other position as this willterminate the process. Read Steps 1 - 4 thoroughly before proceeding ...

4. Within approximately seven seconds of the light turning off, bucklethen unbuckle the safety belt. • This will disable the Belt-Minder 威 feature for that seating position if it is currently enabled. As confirmation, the restraint system warninglight will flash four times per second for three secon...

WARNING: Front seating positions only: If seating two adults and a child, Ford recommends properly restraining the child in the center front seating position, but only if doing so will not interferewith driving the vehicle. This arrangement provides lap and shoulderbelt and airbag protection for adu...

In case there is a problem with thefront passenger sensing system, theairbag readiness lamp in theinstrument cluster will stay lit. If the airbag readiness lamp is lit, do the following: The driver and/or adult passengers should check for any objects thatmay be lodged underneath the front passenger ...

Determining if the system is operational The SRS uses a readiness light in the instrument cluster or a tone toindicate the condition of the system. Refer to the Warning lights and chimes section in the Instrument Cluster chapter. Routine maintenance of the airbag is not required. A difficulty with t...

to inflate in side-impact collisions, not roll-over, rear-impact, frontal ornear-frontal collisions, unless the collision causes sufficient lateraldeceleration. WARNING: Several air bag system components get hot after inflation. Do not touch them after inflation. WARNING: If the side airbag has depl...

SAFETY RESTRAINTS FOR CHILDREN See the following sections for directions on how to properly use safetyrestraints for children. Also see Airbag supplemental restraint system (SRS) in this chapter for special instructions about using airbags. Important child restraint precautions WARNING: Always make ...

Recommendations for Safety Restraints for Children Child size, height, weight, or age Recommendedrestraint type Infantsortoddlers Children weighing 40 lb (18 kg) orless (generally age four or younger) Use a child safetyseat (sometimescalled an infantcarrier, convertibleseat, or toddler seat). Smallc...

Recommendations for attaching child safety restraints for children RestraintType Child Weight Use any attachment method as indicated below by “X” LATCH(loweranchorsandtoptetheranchor) LATCH(loweranchorsonly) Safetybeltandtoptetheranchor Safetybelt andLATCH(loweranchorsand toptetheranchor) Safetybelt...

WARNING: Always carefully follow the instructions and warnings provided by the manufacturer of any child restraint to determine if the restraint device is appropriate for your child’s size,height, weight, or age. Follow the child restraint manufacturer’sinstructions and warnings provided for install...

training to ensure that all children ages 0 to 16 are properly restrained inthe correct restraint system. Ford recommends checking with a NHTSACertified Child Passenger Safety Technician (CPST) and yourpediatrician to make sure your seat is appropriate for your child andproperly installed in the veh...

Perform the following steps when installing the child seat withcombination lap/shoulder belts: Note: Although the child seat illustrated is a forward facing child seat, the steps are the same for installing a rear facing child seat. 1. Position the child safety seat in aseat with a combination lap a...

Combining safety belt and LATCH lower anchors for attachingchild safety seats When used in combination, either the safety belt or the LATCH loweranchors may be attached first, provided a proper installation is achieved.Attach the tether strap afterward, if included with the child seat. Referto Recom...

2. Locate the correct anchor for theselected seating position. 3. Open the tether anchor cover. 4. Clip the tether strap to theanchor as shown. If the tether strap is clippedincorrectly, the child safety seat maynot be retained properly in theevent of a collision. 5. Tighten the child safety seat te...

Children and booster seats vary in size and shape. Choose a booster thatkeeps the lap belt low and snug across the hips, never up across thestomach, and lets you adjust the shoulder belt to cross the chest andrest snugly near the center of the shoulder. The drawings below comparethe ideal fit (cente...

Follow all instructions provided by the manufacturer of the booster seat. WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the riskof injury or death in a collis...

INFORMATION ABOUT UNIFORM TIRE QUALITY GRADING Tire Quality Grades apply to newpneumatic passenger car tires. TheQuality grades can be found whereapplicable on the tire sidewallbetween tread shoulder andmaximum section width. Forexample: • Treadwear 200 Traction AA Temperature A These Tire Quality G...

WARNING: Under-inflation is the most common cause of tire failures and may result in severe tire cracking, tread separation or ⬙ blowout ⬙ , with unexpected loss of vehicle control and increased risk of injury. Under-inflation increases sidewall flexing and rollingresistance, resulting in heat build...

Note: If you have to drive a distance to get air for your tire(s), check and record the tire pressure first and add the appropriate air pressurewhen you get to the pump. It is normal for tires to heat up and the airpressure inside to go up as you drive. 2. Remove the cap from the valve on one tire, ...

Improper or inadequate vehicle maintenance can cause tires to wearabnormally. Inspect all your tires, including the spare, frequently, andreplace them if one or more of the following conditions exist: Tire wear When the tread is worn down to1/16th of an inch (2 mm), tires mustbe replaced to help pre...

U.S. DOT Tire Identification Number (TIN) Both U.S. and Canada Federal regulations require tire manufacturers toplace standardized information on the sidewall of all tires. Thisinformation identifies and describes the fundamental characteristics ofthe tire and also provides a U.S. DOT Tire Identific...

WARNING: When mounting replacement tires and wheels, you should not exceed the maximum pressure indicated on the sidewall of the tire to set the beads without additional precautionslisted below. If the beads do not seat at the maximum pressureindicated, re-lubricate and try again.When inflating the ...

• Do not run over curbs or hit the tire against a curb when parking WARNING: If your vehicle is stuck in snow, mud, sand, etc., do not rapidly spin the tires; spinning the tires can tear the tire and cause an explosion. A tire can explode in as little as three to fiveseconds. WARNING: Do not spin th...

Tire rotation Rotating your tires at the recommended interval (as indicated in the scheduled maintenance information that comes with your vehicle) will help your tires wear more evenly, providing better tire performance andlonger tire life. • Rear-wheel drive (RWD)vehicles/Four-wheel drive(4WD)/All-...

7. H: Indicates the tire’s speed rating. The speed rating denotes the speed at which a tire is designed to be driven for extended periods oftime under a standard condition of load and inflation pressure. The tireson your vehicle may operate at different conditions for load and inflationpressure. The...

Additional information contained on the tire sidewall for “LT” typetires “LT” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below. Note: Tire Quality Grades do not apply to this type of tire. 1. LT: Indicates a tire, designated by the Tire a...

Information on “T” type tires “T” type tires have some additionalinformation beyond those of “P”type tires; these differences aredescribed below: T145/80D16 is an example of a tiresize. Note: The temporary tire size for your vehicle may be different fromthis example. Tire Quality Grades donot apply ...

The Tire Pressure Monitoring System complies with part 15 of the FCCrules and with RSS-210 of Industry Canada. Operation is subject to thefollowing two conditions: (1) This device may not cause harmfulinterference, and (2) This device must accept any interference received,including interference that...

Understanding your Tire Pressure Monitoring System (TPMS) The Tire Pressure Monitoring System measures pressure in your fourroad tires and sends the tire pressure readings to your vehicle. The LowTire Warning Lamp will turn ON if the tire pressure is significantly low.Once the light is illuminated, ...

Low Tire PressureWarning Light Possible cause Customer Action Required Solid Warning Light Tire(s)under-inflated 1. Check your tire pressure toensure tires are properlyinflated; refer to Inflating your tires in this chapter. 2. After inflating your tires tothe manufacturer’srecommended inflationpres...

Low Tire PressureWarning Light Possible cause Customer Action Required Flashing WarningLight Spare tire in use Your temporary spare tire is in use. (This includes the optionalfull-sized matching wheel andtire). Repair the damaged roadwheel and re-mount it on thevehicle to restore systemfunctionality...

check each tire to verify that no tire is flat. (If one or more tires are flat,repair as necessary.) Check air pressure in the road tires. If any tire isunder-inflated, carefully drive the vehicle to the nearest location whereair can be added to the tires. Inflate all the tires to the recommendedinf...

Example only: Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue loadweight is also part of cargo weight. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb wei...

GAWR (Gross Axle Weight Rating) – is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Safety Compliance Certification Labellocated on the B-Pillar or the edge of the driver’s door. The totalload on each axle must never exceed its GAWR....

• Example only: WARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structuraldamage, serious damage to the vehicle, loss of control and personalinjury. Tires, Wheels and Lo...

GCW (Gross Combined Weight) – is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer. GCWR (Gross Combined Weight Rating) – is the maximum allowable weight of the vehicle and the loaded trailer – including all cargo andpassengers – that the vehicle can handle without r...

Steps for determining the correct load limit: 1. Locate the statement “The combined weight of occupants and cargoshould never exceed XXX kg or XXX lbs.” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that willbe riding in your vehicle. 3. Subtract the combin...

calculation would be: 635 kg - (2 x 99 kg) - (12 x 45 kg) = 635 - 198 -540 = -103 kg. You will need to reduce the load weight by at least240 lb. (104 kg). If you remove 3-100 lb. (45 kg) cement bags, thenthe load calculation would be: 1,400 - (2 x 220) - (9 x 100) = 1,400 - 440 - 900 = 60 lb. Now yo...

Safety chains Always connect the trailer’s safety chains to the frame or hook retainersof the vehicle hitch. To connect the trailer’s safety chains, cross thechains under the trailer tongue and allow slack for turning corners. If you use a rental trailer, follow the instructions that the rental agen...

• To eliminate excessive shifting, use a lower gear. This will also assistin transmission cooling. For additional information, refer to Automatic transmission operation in the Driving chapter. • Anticipate stops and brake gradually. • Do not exceed the GCWR rating or transmission damage may occur. S...

Launching or retrieving a boat Disconnect the wiring to the trailer before backing the trailerinto the water. Reconnect the wiring to the trailer after thetrailer is removed from the water. When backing down a ramp during boat launching or retrieval: • do not allow the static water level to rise abo...

STARTING Positions of the ignition 1. Off— shuts off the engine and allaccessories/locks the gearshift leverand allows key removal. 2. Accessory— allows the electricalaccessories such as the radio tooperate while the engine is notrunning. 3. On— all electrical circuitsoperational. Warning lightsillu...

You may experience a decrease in peak performance when the engine iscold when operating on E 85 ethanol. Do not crank the engine for more than 10 seconds at a time as starterdamage may occur. If the engine fails to start, turn the key to off andwait 30 seconds before trying again. Do not use startin...

ENGINE BLOCK HEATER (IF EQUIPPED) An engine block heater warms the engine coolant which aids in startingand allows the heater/defroster system to respond quickly. If your vehicleis equipped with this system, your equipment includes a heater elementwhich is installed in your engine block and a wire h...

• To reduce the risk of electrical shock, do not use your heater withungrounded electrical systems or two pronged (cheater) adapters.Also ensure that the block heater, especially the cord, is in goodcondition before use. • Make sure that when in operation, the extension cord plug /engineblock heater...

BRAKES Your service brakes are self-adjusting. Refer to the scheduled maintenance information for scheduled maintenance. Occasional brake noise is normal and often does not indicate aperformance concern with the vehicle’s brake system. In normaloperation, automotive brake systems may emit occasional...

The ABS operates by detecting theonset of wheel lockup during brakeapplications and compensates forthis tendency. The wheels areprevented from locking even whenthe brakes are firmly applied. Theaccompanying illustration depictsthe advantage of an ABS equippedvehicle (on bottom) to a non-ABSequipped ...

Parking brake Apply the parking brake wheneverthe vehicle is parked. To set the parking brake: 1. Move the gearshift to P (Park). 2. Press pedal downward. The BRAKE warning lamp in theinstrument cluster illuminates andremains illuminated (when theignition is turned on) until theparking brake is full...

STEERING To help prevent damage to the power steering system, never hold thesteering wheel at its furthest turning points (until it stops) for more thana few seconds when the engine is running. It is also important to maintain a proper power steering fluid level in thepower steering fluid reservoir:...

If you exceed the load limit, the rear air suspension may not operate. The air suspension shut-off switch islocated on the left side of the trunk.If this switch is in the off position,the rear air suspension will notoperate. WARNING: On vehicles equipped with air suspension, turn off the airsuspensi...

2. Locate the access plug on theunderside of the steering columncover. 3. Remove the access plug using aflat head screwdriver. Insert thescrewdriver into the access holenearest the steering wheel. Thenpress and hold the override buttonusing a flat head screwdriver. Applythe brake pedal and shift the...

• To return to O/D (overdrive mode), press the transmission controlswitch. The O/D OFF lamp will not be illuminated. • O/D (Overdrive) is automatically returned each time the key is turnedoff. 2 (Second) This position allows for second gear only. • Provides engine braking. • Use to start-up on slipp...

DRIVING THROUGH WATER If driving through deep or standingwater is unavoidable, proceed veryslowly especially when the depth isnot known. Never drive throughwater that is higher than the bottomof the wheel rims (for cars) or thebottom of the hubs (for trucks). When driving through water, traction or ...

ROADSIDE ASSISTANCE Getting roadside assistance To fully assist you should you have a vehicle concern, Ford Motor Companyoffers a complimentary roadside assistance program. This program isseparate from the New Vehicle Limited Warranty. The service is available: • 24-hours, seven days a week • for th...

• emergency travel expense reimbursement • travel planning benefits In Canada, for uninterrupted Roadside Assistance coverage, you maypurchase extended coverage prior to your Basic Warranty’s RoadsideAssistance expiring. For more information and enrollment, contact1-877-294-2582 or visit our website...

FUEL PUMP SHUT-OFF SWITCH FUEL RESET The fuel pump shut-off switch is a device intended to stop the electricfuel pump when your vehicle has been involved in a substantial jolt. After a collision, if the engine cranks but does not start, the fuel pumpshut-off switch may have been activated. The fuel ...

FUSES AND RELAYS Fuses If electrical components in thevehicle are not working, a fuse mayhave blown. Blown fuses areidentified by a broken wire withinthe fuse. Check the appropriatefuses before replacing any electricalcomponents. Note: Always replace a fuse with one that has the specified amperage r...

Passenger compartment fuse panel The fuse panel is located below and to the left of the steering wheel bythe brake pedal. Remove the panel cover to access the fuses. To remove a fuse use the fuse puller tool provided on the fuse panelcover. The fuses are coded as follows. Fuse/Relay Location Fuse Am...

Fuse/Relay Location Fuse Amp Rating Protected Circuits 4 10A Lighting control module (LCM)(switch illumination), Autolampsensor 5 7.5A Ignition (ON/ACC) - LCM 6 7.5A LCM 7 10A Ignition (ON/ACC) - Wipermodule 8 10A Electronic automatic temperaturecontrol (EATC) module (vehiclesequipped with EATC only...

Fuse/Relay Location Fuse Amp Rating Protected Circuits 17 10A Ignition (ON) - A/C mode switch(vehicles equipped with manualA/C), Blend door, Heated seatmodules 18 15A LCM (interior lighting) 19 10A LCM (Left-hand low beam) 20 10A Ignition (ON/START) - Back-uplamps, Anti-lock brake system(ABS) 21 10A...

Fuse/Relay Location Fuse Amp Rating Protected Circuits 30 2A Battery saver (Police vehiclesonly) 31 5A Key in (LCM) 32 2A Hazard out (Police vehicles only) 33 10A Fire suppression module (ifequipped) (Police vehicles only) K101 Full ISO relay Window relay, Decklid (Policevehicles only) Power distrib...

Your vehicle may be equipped with a conventional spare tire that isdifferent in one or more of the following: type, brand, size, speed ratingand tread design. If this is the case, this dissimilar spare tire is still ratedfor your vehicle loads (GAWR and GVWR). This temporary spare tire isnot equippe...

• Wet weather driving capability • All-Wheel driving capability (if applicable) • Load leveling adjustment (if applicable) When driving with the full-size dissimilar spare tire/wheel additionalcaution should be given to: • Towing a trailer • Driving vehicles equipped with a camper body • Driving veh...

Tire change procedure WARNING: When one of the front wheels is off the ground, the transmission alone will not prevent the vehicle from moving or slipping off the jack, even if the vehicle is in P (Park). WARNING: To help prevent the vehicle from moving when you change a tire, be sure the parking br...

Before placing the jack under the vehicle, NOTE the jack location markings: JACK LOCATION The jack location markings can befound on the lower outer edge of the body. • Locate the jack locator mark (B)on the body (C) near the tire youare changing, then place the jack(D) under the frame (A) of the veh...

6. Lower the vehicle by turning the jack handle counterclockwise. 7. Remove the jack and fully tightenthe lug nuts in the order shown.Refer to Wheel lug nut torque specifications later in this chapter for the proper lug nut torquespecification. 8. Install any wheel covers,ornaments or hub caps. Make...

4. Check all battery terminals and remove any excessive corrosion beforeyou attach the battery cables. Ensure that vent caps are tight and level. 5. Turn the heater fan on in both vehicles to protect from any electricalsurges. Turn all other accessories off. Connecting the jumper cables 1. Connect t...

Jump starting 1. Start the engine of the booster vehicle and run the engine atmoderately increased speed. 2. Start the engine of the disabled vehicle. 3. Once the disabled vehicle has been started, run both engines for anadditional three minutes before disconnecting the jumper cables. Removing the j...

3. Remove the jumper cable from the positive (+) terminal of the boostervehicle’s battery. 4. Remove the jumper cable from the positive (+) terminal of thedisabled vehicle’s battery. After the disabled vehicle has been started and the jumper cablesremoved, allow it to idle for several minutes so the...

WRECKER TOWING If you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, yourroadside assistance service provider. It is recommended that your vehicle be towed with a wheel lift or flatbedequipment. Do not tow with a slingb...

Emergency towing In case of a roadside emergency with a disabled vehicle (without accessto wheel dollies, car hauling trailer, or flatbed transport vehicle) yourvehicle (regardless of transmission powertrain configuration) can be flattowed (all wheels on the ground) under the following conditions: •...

GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorizedFord, Lincoln, or Mercury dealer. While any authorized dealer handlingyour vehicle line will provide warranty service, we recommend youreturn to your selling authorized dealer who wants to ensure yourcon...

In Canada: Mailing address (Ford vehicles) Customer Relationship CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oakville, Ontario L6J 5E4 Telephone 1-800-565-3673 (FORD) Online www.ford.ca Mailing address (Lincoln vehicles) Lincoln CentreFord Motor Company of Canada, LimitedP.O. Box 2000Oak...

UTILIZING THE MEDIATION/ARBITRATION PROGRAM(CANADA ONLY) For vehicles delivered to authorized Canadian dealers. In those caseswhere you continue to feel that the efforts by Ford of Canada and theauthorized dealer to resolve a factory-related vehicle service concernhave been unsatisfactory, Ford of C...

WASHING THE EXTERIOR Wash your vehicle regularly with cool or lukewarm water and a neutralpH shampoo, such as Motorcraft 威 Detail Wash (ZC-3-A), which is available from your authorized dealer. • Never use strong household detergents or soap, such as dish washingor laundry liquid. These products can ...

ENGINE Engines are more efficient when they are clean because grease and dirtbuildup keep the engine warmer than normal. When washing: • Take care when using a power washer to clean the engine. Thehigh-pressure fluid could penetrate the sealed parts and causedamage. • Do not spray a hot engine with ...

PLASTIC (NON-PAINTED) EXTERIOR PARTS Use only approved products to clean plastic parts. These products areavailable from your authorized dealer. • For routine cleaning, use Motorcraft 威 Detail Wash (ZC-3-A). • If tar or grease spots are present, use Motorcraft 威 Bug and Tar Remover (ZC-42). WINDOWS ...

• If grease or tar is present on the material, spot-clean the area firstwith Motorcraft 威 Spot and Stain Remover (ZC-14). In Canada, use Motorcraft 威 Multi-Purpose Cleaner (CXC-101). • If a ring forms on the fabric after spot cleaning, clean the entire areaimmediately (but do not oversaturate) or th...

FORD AND LINCOLN MERCURY CAR CARE PRODUCTS Your Ford or Lincoln Mercury authorized dealer has many qualityproducts available to clean your vehicle and protect its finishes. Thesequality products have been specifically engineered to fulfill yourautomotive needs; they are custom designed to complement...

SERVICE RECOMMENDATIONS To help you service your vehicle, we provide scheduled maintenance information which makes tracking routine service easy. If your vehicle requires professional service, your authorized dealer canprovide the necessary parts and service. Check your Warranty Guide/Customer Infor...

Working with the engine on 1. Set the parking brake and shift to P (Park). 2. Block the wheels. WARNING: To reduce the risk of vehicle damage and/or personal burn injuries, do not start your engine with the air cleaner removed and do not remove it while the engine is running. OPENING THE HOOD 1. Ins...

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT 1. Brake fluid reservoir 2. Engine oil dipstick 3. Windshield washer fluid reservoir 4. Air filter assembly 5. Power steering fluid reservoir 6. Engine coolant reservoir 7. Battery 8. Power distribution box 9. Engine oil filler cap 10. Automatic trans...

WINDSHIELD WASHER FLUID Add fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely. Only use a washer fluid that meetsFord specifications. Do not use anyspecial washer fluid such aswindshield water repellent type fluidor bug wash. They may causesque...

To prolong the life of the wiper blades, it is highly recommended toscrape off the ice on the windshield before turning on the wipers. Thelayer of ice has many sharp edges and can damage the micro edge of thewiper rubber element. ENGINE OIL Checking the engine oil Refer to the scheduled maintenance ...

• If the oil level is below this mark, engine oil must be added to raise the level within thenormal operating range. • If required, add engine oil to theengine. Refer to Adding engine oil in this chapter. • Do not overfill the enginewith oil. Oil levels above thismark may cause enginedamage. If the ...

Engine oil and filter recommendations Look for this certificationtrademark. Use SAE 5W-20 engine oil Only use oils certified for gasoline engines by the American PetroleumInstitute (API). An oil with this trademark symbol conforms to thecurrent engine and emission system protection standards and fue...

BATTERY Your vehicle is equipped with aMotorcraft 威 maintenance-free battery which normally does notrequire additional water during itslife of service. If your battery has a cover/shield, make sure it is reinstalledafter the battery has been cleaned or replaced. For longer, trouble-free operation, k...

If the battery has been disconnected or a new battery has been installed,the clock and radio settings must be reset once the battery isreconnected. • Always dispose of automotivebatteries in a responsible manner.Follow your local authorizedstandards for disposal. Call yourlocal authorized recycling ...

When the engine is cold, check thelevel of the engine coolant in thereservoir. • The engine coolant should be at the FULL COLD level or within theCOLD FILL RANGE as listed on the engine coolant reservoir(depending upon application). • Refer to scheduled maintenance information for service interval s...

WARNING: Do not add engine coolant when the engine is hot. Steam and scalding liquids released from a hot cooling system can burn you badly. Also, you can be burned if you spill coolant on hotengine parts. WARNING: Do not put engine coolant in the windshield washer fluid container. If sprayed on the...

WARNING: To reduce the risk of personal injury, make sure the engine is cool before unscrewing the coolant pressure relief cap. The cooling system is under pressure; steam and hot liquid can comeout forcefully when the cap is loosened slightly. Add the proper mixture of coolant and water to the cool...

Used engine coolant should be disposed of in an appropriate manner. Follow your community’s regulations and standards for recyclingand disposing of automotive fluids. Coolant refill capacity To find out how much fluid your vehicle’s cooling system can hold, referto Maintenance product specifications...

What you should know about fail-safe cooling If the engine coolant supply is depleted, this feature allows the vehicle tobe driven temporarily before incremental component damage is incurred.The “fail-safe” distance depends on ambient temperatures, vehicle loadand terrain. How fail-safe cooling work...

WARNING: Never remove the coolant reservoir cap while the engine is running or hot. 5. Re-start the engine and take your vehicle to an authorized dealer. Driving the vehicle without repairing the engine problemincreases the chance of engine damage. Take your vehicle to anauthorized dealer as soon as...

Observe the following guidelines when handling automotive fuel: • Extinguish all smoking materialsand any open flames beforefueling your vehicle. • Always turn off the vehicle beforefueling. • Automotive fuels can be harmfulor fatal if swallowed. Fuels such as gasoline and ethanol are highlytoxic an...

Refueling WARNING: Fuel vapor burns violently and a fuel fire can cause severe injuries. To help avoid injuries to you and others: • Read and follow all the instructions on the pump island; • Turn off your engine when you are refueling; • Do not smoke if you are near fuel or refueling your vehicle; ...

Crown Victoria vehicles only Choosing the right fuel If your vehicle is a flexible fuel vehicle (FFV), use only UNLEADEDFUEL and FUEL ETHANOL (Ed75–Ed85). If your vehicle is not a flexible fuel vehicle (FFV), then only useUNLEADED fuel or UNLEADED fuel blended with a maximum of 10%ethanol. Do not us...

Do not be concerned if your enginesometimes knocks lightly. However,if it knocks heavily under mostdriving conditions while you areusing fuel with the recommendedoctane rating, see your authorized dealer to prevent any engine damage. FFV engine (if equipped) If your vehicle is flex fuel capable, it ...

Running out of fuel Avoid running out of fuel because this situation may have an adverseeffect on powertrain components. If you have run out of fuel: • You may need to cycle the ignition from off to on several times afterrefueling to allow the fuel system to pump the fuel from the tank tothe engine....

For consistent results when filling the fuel tank: • Turn the engine/ignition switch to the off position prior to refueling,an error in the reading will result if the engine is left running. • Use the same filling rate setting (low — medium — high) each timethe tank is filled. • Allow no more than t...

Driving style — good driving and fuel economy habits Give consideration to the lists that follow and you may be able to changea number of variables and improve your fuel economy. Habits • Smooth, moderate operation can yield up to 10% savings in fuel. • Steady speeds without stopping will usually gi...

Conditions • Heavily loading a vehicle or towing a trailer may reduce fuel economyat any speed. • Carrying unnecessary weight may reduce fuel economy (approximately1 mpg [0.4 km/L] is lost for every 400 lb [180 kg] of weight carried). • Adding certain accessories to your vehicle (for example bugdefl...

for 15 seconds without cranking the engine. If the service enginesoon indicator blinks eight times, it means that the vehicle is not ready for I/M testing; if the service engine soon indicator stays on solid, it means that the vehicle is ready for I/M testing. The OBD-II system is designed to check ...

4. Check the fluid level in thereservoir. It should be between theMIN and MAX lines. Do not addfluid if the level is in this range. 5. If the fluid is low, add fluid in small amounts, continuously checkingthe level until it reaches the range between the MIN and MAX lines. Besure to put the cap back ...

AIR FILTER Refer to scheduled maintenance information for the appropriate intervals for changing the air filter element. When changing the air filter element, use only the air filter elementlisted. Refer to Motorcraft 威 part numbers in this chapter. WARNING: To reduce the risk of vehicle damage and/...

MOTORCRAFT PART NUMBERS Component 4.6L V8 engine Air filter element FA-1783 Fuel filter FG-1114 Battery-standard BXT-65–650 Battery-heavy duty BXT-65–750 Oil filter FL-820-S Oil filter (with oil cooler ) FL-910 Spark plugs 1 1 For spark plug replacement, see your authorized dealer. Refer to schedule...

The Vehicle Identification Number (VIN) contains the followinginformation: 1. World manufacturer identifier 2. Brake system / Gross VehicleWeight Rating (GVWR) / RestraintDevices and their location 3. Make, vehicle line, series, bodytype 4. Engine type 5. Check digit 6. Model year 7. Assembly plant ...

This information is intended to aid the operators of police or fleetvehicles (used in severe duty, high mileage operations) in understandingthe required maintenance services for such vehicles. It coversmaintenance services for vehicles equipped with Heavy Duty packages.However, other vehicles operat...

TRANSMISSION The police vehicle has a unique high-performance powertrain includingtransmission and an aluminum driveshaft, which is designed formaximum vehicle performance. Due to the nature of this powertrain,some powertrain noise may be present. Driving in the overdrive cancel mode for prolonged p...

Example: When the odometer has accumulated 3,000 miles (4,828 km) and the idle meter shows 61 hours, a 5,000 mile (8047 km) oil changeinterval will have been reached: 3,000 road miles + (61 idle hours x33 miles/idle hour) = 5,013 miles. In metric units this calculation wouldbe 4,828 kilometers + (61...

Taxi Pin Function Gauge Color 1 Not used — — 2 Vehicle speed signal 20 Gray/Black 3 Battery saver 18 Light green/Orange 4 50A Battery 10 Light green 5 Not used — — 6 50A Battery 10 Tan/Yellow 7 20A Run/Acc 12 White/Pink 8 10A Run/Acc 14 Light Blue/White 9 50A Battery 10 Yellow 10 Not used — — 11 50A...

Headlight flashers (wig-wags) - police An interfacing connector is provided on the headlight circuit for use ofthe headlights as alternating flashers (wig-wags). The connector islocated in front of the radiator. A protective cap is attached to preventcontaminants from entering the connector when a w...

WHEELS/TIRES/BRAKES Wheel rims - police To withstand the demands placed on vehicles driven under heavy-dutyservice conditions, Ford Motor Company installs heavy-duty steel wheels. Tires - police Tires (including the spare) are speed-rated radials for police use. Useonly the recommended tire size and...

Each road tire, as well as the spare,is equipped with a tire pressuresensor fastened to the inside of therim, opposite (180 degrees) fromthe valve stem. The signal from eachtransmitter is digitally unique toavoid interference from transmitterson other nearby vehicles. Note: The spare has a TPMS sens...

TPMS reset tips: • To reduce the chances of interference from another vehicle, TPMSreset should be performed at least three feet (one meter) away fromanother Ford Motor Company vehicle undergoing the TPMS resetprocedure at the same time. • Do not wait more than two (2) minutes between resetting each...

4. Press and hold the brake pedalfor two (2) seconds, then release. 5. Turn the ignition to off— DO NOT remove the key. 6. Cycle the ignition from off to on three (3) times ending in on— DO NOT start the engine. If the reset mode has been entered successfully, the horn will soundonce, and the TPMS i...

If after repeating the procedure and two short beeps are heard when theignition is turned to off, seek assistance from your authorized dealer. Brakes - police The police vehicle is equipped with heavy-duty front disc brake pads tomeet the varying demands of different police service for fade resistan...

Aftermarket equipment installation Ford has developed a Police Interceptor Modifier Guide to assist the vehicle modifier in safely installing police equipment into the vehicle.The guide provides detailed information on the location of key vehiclecomponents that must be untouched and warnings for oth...

WARNING: Following the trunk packing considerations, also on the www.fleet.ford.com website, is the most meaningful method of reducing risk. If your department practice is inconsistent with theTrunk Packing Considerations, then Ford suggests that you considerpurchasing an optional drop-in Trunk Pack...

3. Ammunition – The safest location for ammunition is the forward package shelf and on the side shelves. It is recommended that a plasticstorage container be utilized and mounted using the ⬙ Trunk Mounting Equipment Guide ⬙ for proper fastener locations. It is also recommended that ammunition remain...

The above illustration is an outside view of the left front door. Theshaded area represents the area covered by the ballistic door panel. Removing the panels It is important that these panels be removed from the vehicle after thevehicle has been impacted on the protected door, the door has beenshot,...

Figure 1 1. 9.5 inches (240 mm) from center of airbag door 2. 15.7 inches (400 mm) from center of airbag door 3. 28.5 inches (725 mm) No objects should be placed between the airbags due to airbagvariability. 10 20 30 40 50 60 70 80 90 100 110 120 20 40 60 80 100 120 140 160 180 200 L P R N D 2 1 1 2...

Figure 2 1. 30.5 inches (775 mm). Cross section through center of vehicle(passenger side shown) 1 Crown Victoria Severe Duty 291 2010 Crown Victoria (cro) Owners Guide, 2nd PrintingUSA (fus)

Figure 3 1. 23.6 inches (600 mm). Front passenger compartment 2. 17 inches (430 mm). Front driver Crown Victoria Severe Duty 292 2010 Crown Victoria (cro) Owners Guide, 2nd PrintingUSA (fus)

Figure 6 1. Area on top of instrument panel. Equipment must not interfere with driver visibility. 2. The airbag door must be kept clear for deployment of airbag 3. Area in front of center console from bottom of ashtray to top ofinstrument panel (see Figure 2 for dimensions) 4. 11 inches (279 mm) wid...

GENUINE FORD ACCESSORIES FOR YOUR VEHICLE See your dealer for the latest accessories available for your vehicle. Accessories 299 2010 Crown Victoria (cro) Owners Guide, 2nd PrintingUSA (fus)

FORD ESP EXTENDED SERVICE PLANS More than 30 million Ford, Lincoln, and Mercury owners have discoveredthe powerful protection of Ford ESP. It is the only extended service planbacked by Ford Motor Company, and provides “peace of mind”protection beyond the New Vehicle Limited Warranty coverage. Up to ...

A ABS (see Brakes) .....................179 Accessory delay ..........................69 Air cleaner filter ...............261–262 Air conditioning ..........................44 Air suspension ...........................183 description ..............................183 Airbag supplemental restraintsy...