Ford 2004 Explorer v.2- Manuals

SAFETY AND ENVIRONMENT PROTECTION Warning symbols in this guide How can you reduce the risk of personal injury and prevent possibledamage to others, your vehicle and its equipment? In this guide, answersto such questions are contained in comments highlighted by the warningtriangle symbol. These comm...

SPECIAL NOTICES Emission warranty The New Vehicle Limited Warranty includes Bumper-to-Bumper Coverage,Safety Restraint Coverage, Corrosion Coverage, and 6.0L Power StrokeDiesel Engine Coverage. In addition, your vehicle is eligible for EmissionsDefect and Emissions Performance Warranties. For a deta...

• how fast the vehicle was traveling; and • where the driver was positioning the steering wheel. To access this information, special equipment must be directly connectedto the recording modules. Ford Motor Company and Ford of Canada donot access event data recorder information without obtaining cons...

These are some of the symbols you may see on your vehicle. Vehicle Symbol Glossary Safety Alert See Owner’s Guide Fasten Safety Belt Air Bag-Front Air Bag-Side Child Seat Child Seat InstallationWarning Child Seat LowerAnchor Child Seat TetherAnchor Brake System Anti-Lock Brake System Brake Fluid -No...

WARNING LIGHTS AND CHIMES Standard instrument cluster Optional instrument cluster Warning lights and gauges can alert you to a vehicle condition that maybecome serious enough to cause expensive repairs. A warning light mayilluminate when a problem exists with one of your vehicle’s functions.Many lig...

On board diagnostics (OBD-II) in the Maintenance and Specifications chapter. If the light is blinking, engine misfire is occurring which coulddamage your catalytic converter. Drive in a moderate fashion (avoidheavy acceleration and deceleration) and have your vehicle servicedimmediately. Under engin...

Warning Light display Customer Action Warning light remains on • Check your tire pressure and ensure your tires are properly inflated, refer to Tire inflation pressure under Tires in the Maintenance and Specifications chapter. • After inflating tires to the manufacturers recommended airpressure the ...

AdvanceTrac 娂 (if equipped): Illuminates when the AdvanceTrac 娂 system is active. If the light remainson, have the system servicedimmediately. Four wheel drive low (ifequipped): Illuminates when four-wheel drive low is engaged. Four wheel drive high (ifequipped): Illuminates when four-wheel drive hi...

GAUGES Standard instrument cluster gauges Optional instrument cluster gauges Speedometer: Indicates the current vehicle speed. 2004 Explorer (exp) Owners Guide (post-2002-fmt)USA English (fus) Instrument Cluster 15

Tachometer: Indicates the engine speed in revolutions per minute.Driving with your tachometerpointer continuously at the top ofthe scale may damage the engine. Battery voltage gauge: Indicates the battery voltage when theignition is in the ON position. If thepointer moves and stays outside thenormal...

AM/FM STEREO / SINGLE CD RADIO (IF EQUIPPED) 1. Balance: Press / to shift sound to the left/right speakers. 2. Fade: Press / to shift sound to the front/rear speakers. 3. SCN (Scan): Press to hear a brief sampling of all listenablestations or CD tracks. Press again tostop. 4. CLK: To set the hour, p...

Traffic: Allows you to hear traffic broadcasts. With the feature ON, press SEEK or SCAN to find a station broadcasting a traffic report (if it isbroadcasting RDS data). Traffic information is not available in most U.S. markets . FIND Program type: Allows you to search RDS-equipped stations for a cer...

13. Power/volume: Press to turn ON/OFF; turn to increase ordecrease volume levels. Speed sensitive volume: Radio volume changes automatically andslightly with vehicle speed tocompensate for road and wind noise. Recommended level is 1–3. Level 0turns the feature off and level 7 is the maximum setting...

Don’t: • Expose tapes to direct sunlight, extreme humidity, heat or cold. • Leave tapes in the cassette player for a long time when not beingplayed. CD/CD PLAYER CARE Do: • Handle discs by their edges only. Never touch the playing surface. • Inspect discs before playing. Clean only with an approved ...

MANUAL HEATING AND AIR CONDITIONING SYSTEM(IF EQUIPPED) 1. Temperature selection: Controls the temperature of theairflow in the vehicle. 2. Air flow selections: Controls the direction of the airflow in thevehicle. See the following for a briefdescription on each control. MAX A/C: Uses recirculated a...

To aid in side window defogging/demisting in cold weather: 1. Select . 2. Select A/C. 3. Set the temperature control to maintain comfort. 4. Set the highest fan speed 5. Direct the outer instrument panel vents towards the side windows. To increase airflow to the outer instrument panel vents, close t...

15. Fan Speed: Used to manually enable or disable the fan speed. 16. EXT: Displays the outside air temperature. It will remaindisplayed until the EXT control ispressed again. The external temperature will be most accurate when thevehicle has been moving for a period of time. 17. Temperature conversi...

Auxiliary system (if equipped) Your vehicle may be equipped with auxiliary climate controls. Theseallow the front or rear seat passengers to control airflow direction,temperature and fan level of the rear compartment to quickly heat orcool the entire vehicle. Front auxiliary controls: 1. Temperature...

1. Temperature control: Determines temperature levels. Ifthe main climate control system iscooling in MAX A/C or mode, the auxiliary controls will notfunction as the entire vehicle willoperate at a full cool temperature. 2. Mode selector: Press to select between air flow to (Floor) or (Panel). Direc...

HEADLAMP CONTROL Turns the lamps off. Turns on the parking lamps, instrument panel lamps, licenseplate lamps and tail lamps. Turns the headlamps on. Autolamp system The autolamp system sets the headlamps to turn on and offautomatically. The autolamp control, located on the headlamp control,may be se...

Move the control to the full down position (past detent) to preventinterior lamps from illuminating when the doors are opened. AIMING THE HEADLAMPS The headlamps on your vehicle are properly aimed before leaving theassembly plant. If your vehicle is involved in an accident or if you haveproblems fix...

5. Locate the vertical adjuster foreach headlamp. Adjust the aim byturning the adjuster control eitherclockwise (to adjust down) orcounterclockwise (to adjust up). Note: Use a 4 mm socket or box wrench to turn the vertical adjustercontrol. 6. Horizontal aiming is not requiredfor this vehicle and isn...

Cargo/reading lamps The dome portion of the lamp orthe center light can be turned onwhen the headlamp control isrotated fully up or when a door isopened. With the ignition in the ACC or ON position, the rear dome lamp can beturned ON or OFF by sliding the control. BULBS Replacing exterior bulbs Chec...

Replacing headlamp bulbs Do not touch the glass of a halogen bulb. 1. Turn off the headlamps and openthe hood. 2. Pry up the two retainer pins untilthey stop to release the headlampassembly from the vehicle, then pullheadlamp forward. 3. Disconnect the electricalconnector by pushing the center taban...

Replacing front parking lamp/turn signal/sidemarker bulbs 1. Turn off the headlamp switch tooff. 2. Remove headlamp screw from thebulb assembly. 3. Disengage lamp assembly. 4. Rotate the bulb socketcounterclockwise and remove itfrom the lamp assembly. 5. Pull the bulb straight out of thesocket. Reve...

MULTI-FUNCTION LEVER Windshield wiper: Rotate the end of the control away from you toincrease the speed of the wipers;rotate towards you to decrease thespeed of the wipers. Speed dependent wipers: When the wiper control is on, the speed ofthe wipers will automatically adjustwith the vehicle speed. T...

Rear center console features (if equipped) The rear center console incorporates the following features: • Utility compartment • Cupholders • Flip forward armrest to provide aflat load floor OVERHEAD CONSOLE (IF EQUIPPED) The appearance of your vehicle’s overhead console will vary according toyour op...

Illuminated visor mirror (if equipped) Lift the mirror cover to turn on the visor mirror lamps. Type A Type B AUXILIARY POWER POINT Power point outlets are designedfor accessory use only. Do nothang any type of accessories oraccessory bracket from theirplugs. Improper use of thepower point outlet ca...

POWER SIDE VIEW MIRRORS The ignition must be in the ACC or ON position to adjust the power sideview mirrors. To adjust your mirrors: 1. Rotate the control clockwise toadjust the right mirror and rotatethe control counterclockwise toadjust the left mirror. 2. Move the control in the directionyou wish...

• Press the speed control OFFcontrol. Note: When you turn off the speed control or the ignition, your speedcontrol set speed memory is erased. STEERING WHEEL CONTROLS (IF EQUIPPED) These controls allow you to operate some radio and climate controlfeatures. Audio control features Press to select: • A...

In any mode: • Press VOL + or − to adjustvolume. Climate control features Press TMP + or - to adjusttemperature. Press + or - to adjust fan speed. MOON ROOF (IF EQUIPPED) You can move the glass panel of the moon roof back to open or tilt up toventilate the vehicle. 2004 Explorer (exp) Owners Guide (...

To open the moon roof: The moon roof is equipped with anautomatic, one-touch, expressopening feature. Press and releasethe rear portion of the control. Tostop motion at any time during theone-touch opening, press the controla second time. To close the moon roof: Press and hold the front portion ofth...

Do not use the HomeLink 威 Wireless Control System with any garage door opener that lacks safety stop and reverse features as required byU.S. federal safety standards (this includes any garage door openermodel manufactured before April 1, 1982). A garage door which cannotdetect an object, signaling t...

Gate Operator & Canadian Programming During programming, yourhand-held transmitter mayautomatically stop transmitting —not allowing enough time forHomeLink 威 to accept the signal from the hand-held transmitter. After completing steps 1 and 2outlined in the “Programming” section, replace step 3 w...

Erasing HomeLink 姞 buttons To erase the three programmedbuttons (individual buttons cannotbe erased): • Press and hold the two outerHomeLink 威 buttons until the red indicator light begins toflash-after 20 seconds. Releaseboth buttons. Do not hold forlonger that 30 seconds. HomeLink 威 is now in the t...

Usually, when something affects the compass readings, the compass willcorrect itself after a few days of operating your vehicle in normalconditions. If the compass still appears to be inaccurate, a manualcalibration may be necessary. Refer to Compass calibration adjustment in this section. Most geog...

Compass calibration adjustment Perform this adjustment in an open area free from steel structures andhigh voltage lines: For optimum calibration, turn off all electrical accessories (heater/airconditioning, wipers, etc.) and make sure all vehicle doors are shut. 1. Start the vehicle. 2. Locate compa...

Selectable features Reset Press this control to select and resetfunctions shown in the INFO menuand SETUP menu. Info menu This control displays the followingcontrol displays: • Odometer/Compass • Trip odometer/Odometer/Compass • Average Fuel Economy • Trip Elapsed Drive Time • Distance to Empty Odom...

System warnings System warnings alert you to possible problems or malfunctions in yourvehicle’s operating systems. In the event of a multiple warning situation, the message center willcycle the display to show all warnings by displaying each one for severalseconds. The message center will display th...

2. Release the RESET controlmomentarily, then press RESET andSETUP controls at the same time toactivate a service mode which willdisplay “OIL LIFE XX% RESET TOALTER”. 3. Press RESET until you find your personalized OIL LIFE XX%. 4. With your personalized OIL LIFE XX% displayed, press SETUP tocontinu...

REAR LIFTGATE The liftgate area is only intended for cargo, not passengers. You can openand close the liftgate from outside the vehicle. It cannot be opened frominside the cargo area. • To open the liftgate window,press the control on the remoteentry key fob or, with the liftgateunlocked, push the c...

To install the cover: Push both ends of the cover into thedepressions (right side first) in thetrim panels behind the second rowseat. To reduce the risk ofinjuries, the cargo area cover must be properly installedon the rear trim panels. Do not place any objects on the cargo area cover. They mayobstr...

LUGGAGE RACK Your vehicle is equipped with a roofrack. The maximum recommendedload is 90 kg (200 lbs), evenlydistributed. If it is not possible todistribute the load, position it as farrearward as possible. Use the tiedown loops on the thumbwheels (ifequipped) to secure the load. To adjust cross-bar...

KEYS One key operates all the locks and starts the vehicle. Always carry aspare key with you in case of an emergency. Your keys are programmed to your vehicle; using a non-programmed keywill not permit your vehicle to start. If you lose your dealer suppliedkeys, replacement keys are available throug...

Childproof door locks • When these locks are set, therear doors cannot be opened fromthe inside. • The rear doors can be openedfrom the outside when the doorsare unlocked. The childproof locks are located onrear edge of each rear door andmust be set separately for eachdoor. Setting the lock for one ...

2. Press and release again within three seconds to confirm that all the doors are closed and locked. Note: The doors will lock again, the horn will chirp and the lamps flash once. Opening the liftgate window Press to unlatch the liftgate window. Sounding a panic alarm Press to activate the alarm. Th...

2. Within 5 five seconds, press any control on the remote transmitterwhich you would like to deactivate and then press the SET control onthe driver’s door panel. 3. Repeat this procedure for another remote transmitter if desired. Replacing the battery The remote entry transmitter uses one coin type ...

Replacing lost remote entry transmitters If you would like to have your remote entry transmitter reprogrammedbecause you lost one, or would like to buy additional remote entrytransmitters, you can either reprogram them yourself, or take all remote entry transmitters to your authorized dealer for rep...

To open the liftgate window, press the 5 • 6 control within five seconds. To lock all doors, liftgate and liftgate window, press the 7 • 8 and the 9 • 0 at the same time. Note: The driver’s door must be closed. You do not need to enter the keypad code first. Autolock The autolock feature will lock a...

3. Turn the ignition key from ON to OFF. 4. Press the power door unlock control three times. 5. Turn the ignition back to ON. The horn will chirp. 6. Press the unlock control, then press the lock control. The horn willchirp once if autolock was deactivated or twice (one short and one longchirp) if a...

Note: Large metallic objects, electronic devices that are used to purchase gasoline or similar items, or a second coded key on the samekey chain may cause vehicle starting issues. You need to prevent theseobjects from touching the coded key while starting the engine. Theseobjects will not cause dama...

Replacement keys If your keys are lost or stolen and you don’t have an extra coded key,you will need to have your vehicle towed to a dealership. The key codesneed to be erased from your vehicle and new coded keys will need to beprogrammed. Replacing coded keys can be very costly. Store an extra prog...

4. Within ten seconds of turning the ignition to the 1 (OFF) position,insert the second previously coded key into the ignition. 5. Turn the ignition from the 1 (OFF) position to the 3 (ON) position.Keep the ignition in the 3 (ON) position for at least three seconds, butno more than 10 seconds. 6. Tu...

SEATING Notes: Reclining the seatback can cause an occupant to slide under theseat’s safety belt, resulting in severe personal injuries in the event of a collision. Do not pile cargo higher than the seatbacks to reduce the risk ofinjury in a collision or sudden stop. Adjustable head restraints Head ...

Push control to lower head restraint. Adjusting the front manual seat (if equipped) Never adjust the driver’s seat or seatback when the vehicle ismoving. Always drive and ride with your seatback upright and the lapbelt snug and low across the hips. Lift handle to move seat forward orbackward. Pull l...

Adjusting the front power seat (if equipped) The control is located on theoutboard side of the seat cushion. Press front to raise or lower thefront portion of the seat cushion. Press rear to raise or lower the rearportion of the seat cushion. Press the control to move the seatforward, backward, up o...

Using the manual lumbar support For more lumbar support, turn thelumbar support control toward thefront of vehicle. For less lumbar support, turn thelumbar support control toward therear of vehicle. Heated seats (if equipped) To operate the heated seats: • Push control located on the seatto activate...

1. Pull upward on the release handleto cycle the seats to the load-floorposition. 2. Rotate the seatback downwardinto the load floor position. 3. Press down on the top outboardarea of the seatback until a click isheard. The seat is now latched inthe floor position. To return the seat to the upright ...

To return the seatback to theupright position: 1. Pull the lever and lift theseatback toward the rear of thevehicle. 2. Rotate the seatback until youhear a click, locking it in the uprightposition. Third row seat (if equipped) 3rd row stow feature The 3rd row seat has a tip/stow feature to increase ...

3. Push the closeout panel forwardover the space between the seats. To put seat in upright position: 1. Pull back the slider panel on theseatback to release the closeoutpanel. 2. Pull the seat release lever locatedon top of the seatback while liftingthe seatback into the uprightposition. 3. The seat...

SAFETY RESTRAINTS Personal Safety System The Personal Safety System provides an improved overall level of frontalcrash protection to front seat occupants and is designed to help furtherreduce the risk of air bag-related injuries. The system is able to analyzedifferent occupant conditions and crash s...

Determining if the Personal Safety System is operational The Personal Safety System uses a warning light in the instrumentcluster or a back-up tone to indicate the condition of the system. Referto the Warning Light section in the Instrument Cluster chapter. Routine maintenance of the Personal Safety...

It is extremely dangerous to ride in a cargo area, inside oroutside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people toride in any area of your vehicle that is not equipped with seats andsafety belts. Be sure everyone i...

Combination lap and shoulder belts 1. Insert the belt tongue into the proper buckle (the buckle closest tothe direction the tongue is coming from) until you hear a snap and feel itlatch. Make sure the tongue is securely fastened in the buckle. • Front and rear seats 2. To unfasten, push the release ...

When to use the automatic locking mode In this mode, the shoulder belt is automatically pre-locked. The belt willstill retract to remove any slack in the shoulder belt. The automaticlocking mode is not available on the driver safety belt.This mode should be used any time a child safety seat is insta...

How to disengage the automatic locking mode Unbuckle the combination lap and shoulder belt and allow it to retractcompletely to disengage the automatic locking mode and activate thevehicle sensitive (emergency) locking mode. After any vehicle collision, the combination lap and shoulder beltsystem at...

Conditions of operation If... Then... The driver’s safety belt is notbuckled before the ignition switchis turned to the ON position... The safety belt warning lightilluminates 1-2 minutes and thewarning chime sounds 4-8seconds. The driver’s safety belt is buckledwhile the indicator light isilluminat...

The following are reasons most often given for not wearing safety belts:(All statistics based on U.S. data) Reasons given... Consider... “Crashes are rare events” 36700 crashes occur every day. The more we drive, the more we areexposed to “rare” events, even forgood drivers. 1 in 4 of us will be ser...

Reasons given... Consider... “I have an air bag” Air bags offer greater protection whenused with safety belts. Frontal airbagsare not designed to inflate in rear andside crashes or rollovers. “I’d rather be thrown clear” Not a good idea. People who are ejected are 40 times more likelyto DIE. Safety ...

1. Turn the ignition switch to the RUN (or ON) position. (DO NOTSTART THE ENGINE) 2. Wait until the safety belt warning light turns off. (Approximately 1–2minutes) • Steps 3–5 must be completed within 60 seconds or the procedure willhave to be repeated. 3. Buckle then unbuckle the safety belt three ...

a collision be replaced. However, if the collision was minor and aqualified technician finds that the belts do not show damage andcontinue to operate properly, they do not need to be replaced. Safetybelt assemblies not in use during a collision should also be inspected andreplaced if either damage o...

Children and air bags Children must always be properlyrestrained. Accident statisticssuggest that children are safer whenproperly restrained in the rearseating positions than in the frontseating position. Failure to followthese instructions may increase therisk of injury in a collision. Air bags can...

The air bags inflate and deflaterapidly upon activation. After air bagdeployment, it is normal to notice asmoke-like, powdery residue orsmell the burnt propellant. This mayconsist of cornstarch, talcumpowder (to lubricate the bag) orsodium compounds (e.g., bakingsoda) that result from thecombustion ...

• diagnostic module. • and the electrical wiring which connects the components. The diagnostic module monitors its own internal circuits and thesupplemental air bag electrical system wiring (including the impactsensors), the system wiring, the air bag system readiness light, the airbag back up power...

How does the Safety Canopy 姟 system work? The design and development of theSafety Canopy 娂 system included recommended testing proceduresthat were developed by a group ofautomotive safety experts known asthe Side Airbag Technical WorkingGroup. These recommended testingprocedures help reduce the risk...

• The readiness light (same light as for front air bag system) will eitherflash or stay lit. • The readiness light will not illuminate immediately after ignition isturned on. • A series of five beeps will be heard. The tone pattern will repeatperiodically until the problem and light are repaired. If...

Booster seats should be used until you can answer YES to ALL of thesequestions: • Can the child sit all the way backagainst the vehicle seat back withknees bent comfortably at theedge of the seat withoutslouching? • Does the lap belt rest low across the hips? • Is the shoulder belt centered on the s...

The shoulder belt should cross the chest, resting snugly on the center ofthe shoulder. The lap belt should rest low and snug across the hips,never up high across the stomach. If the booster seat slides on the vehicle seat, placing a rubberized meshsold as shelf or carpet liner under the booster seat...

Installing child safety seats with combination lap and shoulderbelts Air bags can kill or injure a child in a child seat. NEVER place a rear-facing child seat in front of an active air bag. If you must use a forward-facing child seat in the front seat, move the seat all theway back. Children 12 and ...

7. Pull the lap belt portion acrossthe child seat toward the buckle andpull up on the shoulder belt whilepushing down with your knee on thechild seat. 8. Allow the safety belt to retract toremove any slack in the belt. 9. Before placing the child in theseat, forcibly move the seat forwardand back to...

STARTING Positions of the ignition 1. OFF/LOCK, shuts off the engineand all accessories/locks the steeringwheel, gearshift lever and allows keyremoval. 2. ACC, allows the electricalaccessories such as the radio tooperate while the engine is notrunning. This position also unlocksthe steering wheel. 3...

Starting the engine 1. Turn the key to 3 (ON) withoutturning the key to 4 (START). Ifthere is difficulty in turning the key,rotate the steering wheel until thekey turns freely. This condition mayoccur when: • the front wheels are turned • a front wheel is against the curb 2. Turn the key to 4 (START...

Refer to Brake system warning light in the Instrument Cluster chapter for information on the brakesystem warning light. Four-wheel anti-lock brake system (ABS) Your vehicle is equipped with an Anti-lock Braking System (ABS). Thissystem helps you maintain steering control during emergency stops bykee...

Parking brake Apply the parking brake wheneverthe vehicle is parked. To set theparking brake, press the parkingbrake pedal down until the pedalstops. The BRAKE warning lamp in theinstrument cluster illuminates andremains illuminated (when theignition is turned ON) until theparking brake is released....

Driving conditions which may activate AdvanceTrac 娂 include: • Taking a turn too fast. • Maneuvering quickly to avoid an accident, pedestrian or obstacle. • Hitting a patch of ice. • Changing lanes on a snow-rutted road. • Entering a snow-free road from a snow-covered side street, or viceversa. • En...

Always set the parking brake fully and make sure the gearshift islatched in P (Park). Turn the ignition to the LOCK position and remove the key whenever you leave your vehicle. If the parking brake is fully released, but the brake warning lampremains illuminated, the brakes may not be working proper...

Transmission operates in third gear only. Used for improved traction on slippery roads. Selecting 3 (Third)provides engine braking. 2 (Second) Use 2 (Second) to start-up on slippery roads or to provide additionalengine braking on downgrades. 1 (First) • Provides maximum engine braking. • Allows upsh...

To help avoid personal injury, always use caution when in R(Reverse) and when using the RSS. This system is not designed to prevent contact with small ormoving objects. The system is designed to provide a warning to assist the driver in detecting large stationary objects to avoid damagingthe vehicle...

The RSS automatically turns onwhen the gear selector is placed inR (Reverse) and the ignition is ON.An RSS control on the instrumentpanel allows the driver to turn theRSS on and off. To turn the RSS off,the ignition must be ON, and thegear selector in R (Reverse). Anindicator light on the control wi...

System indicator lights • 4X4 HIGH - momentarily illuminates when the vehicle isstarted. Illuminates when 4H isselected. • 4X4 LOW – momentarily illuminates when the vehicle isstarted. Illuminates when 4L isselected. Using the Control Trac 4WD system 4X4 AUTO - Power to all four wheels; used for nor...

Note: Do not perform this operation at speeds above 72 km/h (45 mph) if the outside temperature is below 0°C (32°F). Note: Do not perform this operation if the rear wheels are slipping. Shifting to/from 4X4 LOW (4WD Low) 1. Bring the vehicle to a complete stop 2. Depress the brake 3. Place the trans...

• Drive slower in strong crosswinds which can affect the normal steeringcharacteristics of your vehicle. • Be extremely careful when driving on pavement made slippery byloose sand, water, gravel, snow or ice. If your vehicle goes off the edge of the pavement • If your vehicle goes off the edge of th...

Do not spin the wheels at over 56 km/h (35 mph). The tires mayfail and injure a passenger or bystander. Emergency maneuvers • In an unavoidable emergency situation where a sudden sharp turnmust be made, remember to avoid “over-driving” your vehicle, i.e.,turn the steering wheel only as rapidly and a...

much air is released from your tires and/or how long you drive thevehicle under these conditions. Avoid excessive speed because vehicle momentum can work against youand cause the vehicle to become stuck to the point that assistance maybe required from another vehicle. Remember, you may be able to ba...

Driving on hilly or sloping terrain Although natural obstacles may make it necessary to travel diagonally upor down a hill or steep incline, you should always try to drive straight upor straight down. Avoid driving crosswise or turning on steep slopes or hills . A danger lies in losing traction, sli...

If you use any tire/wheel combination not recommended by Ford MotorCompany, it may adversely affect vehicle handling and could causesteering, suspension, axle or transfer case failure as well as the increasedrisk of loss of vehicle control. Do not use “aftermarket lift kits” or other suspension modi...

Company strongly recommends that you do not make modifications suchas adding or removing parts (such as lift kits or stabilizer bars) or byusing replacement parts not equivalent to the original factory equipment.Any modifications to a vehicle that raise the center of gravity can makeit more likely t...

Vehicles with a higher center of gravity such as utility andfour-wheel drive vehicles handle differently than vehicles with a lower center of gravity. Utility and four-wheel drive vehicles are not designed for cornering at speeds as high as passenger cars any morethan low-slung sports cars are desig...

possibly rolling over. Whenever driving on a hill, determine beforehandthe route you will use. Do not drive over the crest of a hill withoutseeing what conditions are on the other side. Do not drive in reverseover a hill without the aid of an observer. When climbing a steep slope or hill,start in a ...

Ford Motor Company recommends that caution be used with any vehicleequipped with a high load or device (such as ladder racks or pickup boxcover).Failure to maintain your vehicle properly may void the warranty, increaseyour repair cost, reduce vehicle performance and operational capabilitiesand adver...

Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue loador king pin weight is also part of cargo weight. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb weigh...

Towing trailers beyond the maximum recommended gross trailerweight exceeds the limit of the vehicle and could result in engine damage, transmission damage, structural damage, loss of vehiclecontrol, vehicle rollover and personal injury. 4x2 GCWR (Gross Combined Weight Rating)/Trailer Weight Engine R...

4x4/AWD GCWR (Gross Combined Weight Rating)/Trailer Weight Engine Rear axle ratio Maximum GCWR-kg(lbs.) Trailer weightrange-kg (lbs.)(0-Maximum) 4.0L SOHC ClassII towing 3.55 3629 (8000) 0-1542 (0-3400) 4.6L* Class IItowing 3.55 3629 (8000) 0–1551 (0–3420) 4.0L SOHC ClassIII/IV towing 3.73 LS 4536 (...

Safety chains Always connect the trailer’s safety chains to the frame or hook retainersof the vehicle hitch. To connect the trailer’s safety chains, cross thechains under the trailer tongue and allow slack for turning corners.If you use a rental trailer, follow the instructions that the rental agenc...

• Under extreme conditions with large frontal trailers, high outsidetemperatures and highway speeds, the coolant gauge may indicatehigher than normal coolant temperatures. If this occurs, reduce speeduntil the coolant temperature returns to the normal range. Refer to Engine coolant temperature gauge...

• do not allow waves to break higher than 15 cm (6 inches) above thebottom edge of the rear bumper. Exceeding these limits may allow water to enter vehicle components: • causing internal damage to the components. • affecting driveability, emissions and reliability. Replace the rear axle lubricant an...

GETTING ROADSIDE ASSISTANCE To fully assist you should you have a vehicle concern, Ford MotorCompany offers a complimentary roadside assistance program. Thisprogram is separate from the New Vehicle Limited Warranty. The serviceis available: • 24–hours, seven days a week • for the New Vehicle Limited...

Canadian customers who require roadside assistance, call1–800–665–2006. If you need to arrange roadside assistance for yourself, Ford MotorCompany will reimburse a reasonable amount. To obtain reimbursementinformation, U.S. Ford or Mercury vehicles customers call1-800-241-3673; Lincoln vehicle custo...

The fuel pump shut-off switch islocated in the passenger’s foot well,by the kick panel. Use the following procedure to reset the fuel pump shut-off switch. 1. Turn the ignition to the OFF position. 2. Check the fuel system for leaks. 3. If no fuel leak is apparent, reset the fuel pump shut-off switc...

Note: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wiredamage and could start a fire. Standard fuse amperage rating and color COLOR Fuse rating Mini fuses Standard fuses Maxi fuses Cartridge maxi fuses 2A Grey Grey...

Passenger compartment fuse panel The fuse panel is located below theinstrument panel on the driver’sside. To remove a fuse use the fuse puller tool provided on the fuse panel box. 1 6 16 21 26 27 28 29 30 22 23 24 25 17 18 19 20 7 8 9 10 11 12 13 14 15 2 3 4 5 2004 Explorer (exp) Owners Guide (post-...

Fuse/Relay Location Fuse Amp Rating Passenger Compartment Fuse Panel Description 23 15A Not used 24 15A Cigar lighter, OBD II, Neutral tow 25 5A Mode-Temperature actuator forauxiliary climate control, Trailertow battery charge relay coil,TPMS 26 7.5A Reverse park aid, Brake shiftinterlock, IVD switc...

Passenger compartment fuse panel (top side) These relays are located on the reverse side of the passengercompartment fuse panel. See your dealer or a certified technician forservice of this relay box. Fuse/Relay Location Description Relay 1 Flasher Relay 2 Rear defrost Relay 3 Delayed accessory Rela...

Power distribution box The power distribution box islocated in the engine compartment.The power distribution box containshigh-current fuses that protect yourvehicle’s main electrical systemsfrom overloads. Always disconnect the battery before servicing high currentfuses. To reduce risk of electrical...

Auxiliary relay box (Vehicles equipped with 4x4) The relay box is located on the frontright fender well. The relays are coded as follows: Fuse/Relay Location Description Relay 64 Two-speed 4x4 motor clockwise Relay 65 Two-speed 4x4 motor counterclockwise Relay 66 Open CHANGING THE TIRES If you get a...

If your vehicle is equipped with a tire pressure monitoringsystem, refer to Tire Pressure Monitoring System (if equipped) in the Maintenance and specifications section for important information. If the tire pressure monitor sensor becomesdamaged, it will no longer function. Dissimilar spare tire/whe...

Note: Passengers should not remain in the vehicle when the vehicle isbeing jacked. 4. Block the wheel that is diagonallyopposite of the flat tire using thewheel chock provided with yourvehicle. Location of the spare tire and tools The spare tire and tools for your vehicle are stowed in the following...

3. Remove the tools from theprovided bag. Rotate the wrench socket out fromthe handle. Removing the spare tire Do not use an impact wrench on the winch drive nut. This willdamage the spare tire winch. 1. Open the cover from the carpeting on cargo floor to expose the winchdrive nut. 2004 Explorer (ex...

2. Insert the lug wrench on thewinch drive nut. The wrench will stop moving andforward resistance to turning will befelt when properly engaged. 3. Turn the wrenchcounterclockwise until the tire islowered to the ground and the cablehas slack. When turning the wrench,make sure that it does not scuff t...

Do not attempt to change a tire on the side of the vehicle closeto moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. 1. Use the tip of the lug wrench toremove the beauty cap by twistingthe tip under the cap. The carpetedfloor...

8. Remove the jack and fully tightenthe lug nuts in the order shown. Stowing the flat/spare tire Note: Failure to follow spare tire stowage instructions may result in failure of cable or loss of spare tire. 1. Lay the tire on the ground with the valve stem facing up, toward thevehicle. 2. Slide the ...

Re-stowing the jack and tools 1. Unblock the wheels. 2. Stow the wheel ornament (if removed) in a safe location in the vehicle(such as the glove box or jack stowage compartment) so it will notbecome damaged. Re-install the wheel ornament onto the wheel once thetire is repaired or replaced. 3. Stow t...

Preparing your vehicle When the battery is disconnected or a new battery is installed, thetransmission must relearn its shift strategy. As a result, the transmissionmay have firm and/or soft shifts. This operation is considered normal andwill not affect function or durability of the transmission. Ov...

2. Connect the other end of the positive (+) cable to the positive (+)terminal of the assisting battery. 3. Connect the negative (-) cable to the negative (-) terminal of theassisting battery. 4. Make the final connection of the negative (-) cable to the providedjumpstarting bolt. Do not use fuel li...

5. Ensure that the cables are clear of fan blades, belts, moving parts ofboth engines, or any fuel delivery system parts. Jump starting 1. Start the engine of the booster vehicle and run the engine atmoderately increased speed. 2. Start the engine of the disabled vehicle. 3. Once the disabled vehicl...

WRECKER TOWING If you need to have your vehicle towed, contact a professional towingservice or, if you are a member of a roadside assistance program, yourroadside assistance service provider. It is recommended that your vehicle be towed with a wheel lift or flatbedequipment. Do not tow with a slingb...

GETTING THE SERVICES YOU NEED At home You must take your Ford vehicle to an authorized Ford dealer forwarranty repairs. While any Ford dealership handling your vehicle linewill provide warranty service, we recommend you return to your sellingdealer who wants to ensure your continued satisfaction. Pl...

In the United States, a warranty dispute must be submitted to theDispute Settlement Board before taking action under the Magnuson-MossWarranty Act, or to the extent allowed by state law, before pursuingreplacement or repurchase remedies provided by certain state laws. Thisdispute handling procedure ...

Making a decision Board members review all available information related to eachcomplaint, including oral presentations, and arrive at a fair and impartialdecision. Board review may be terminated at any time by either party. Every effort is made to decide the case within 40 days of the date thatall ...

In the CAMVAP program, impartial third-party arbitrators conducthearings at mutually convenient times and places in an informalenvironment. These impartial arbitrators review the positions of theparties, make decisions and, when appropriate, render awards to resolvedisputes. CAMVAP decisions are fas...

WASHING THE EXTERIOR Wash your vehicle regularly with cool or lukewarm water and a neutralPh shampoo, such as Motorcraft Detail Wash (ZC-3–A), which is availablefrom your dealer. • Never use strong household detergents or soap, such as dish washingor laundry liquid. These products can discolor and s...

PAINT CHIPS Your dealer has touch-up paint and sprays to match your vehicle’s color.Take your color code (printed on a sticker in the driver’s door jam) toyour dealer to ensure you get the correct color. • Remove particles such as bird droppings, tree sap, insect deposits, tarspots, road salt and in...

• For routine cleaning, use Motorcraft Detail Wash (ZC-3–A). • If tar or grease spots are present, use Motorcraft Bug and TarRemover (ZC-42). WINDOWS AND WIPER BLADES The windshield, rear and side windows and the wiper blades should becleaned regularly. If the wipers do not wipe properly, substances...

• Do not use household or glass cleaners as these may damage thefinish. INTERIOR For fabric, carpets, cloth seats and safety belts: • Remove dust and loose dirt with a vacuum cleaner. • Remove light stains and soil with Motorcraft Extra StrengthUpholstery Cleaner (ZC-41). • If grease or tar is prese...

FORD, LINCOLN AND MERCURY CAR CARE PRODUCTS Your Ford, Lincoln or Mercury dealer has many quality products availableto clean your vehicle and protect its finishes. These quality productshave been specifically engineered to fulfill your automotive needs; theyare custom designed to complement the styl...

SERVICE RECOMMENDATIONS • Use the Scheduled Maintenance Guide to track routine service. • Use only recommended fuels, lubricants, fluids and service partsconforming to specifications. • Your dealership can provide parts and service. PRECAUTIONS WHEN SERVICING YOUR VEHICLE • Do not work on a hot engi...

OPENING THE HOOD 1. Inside the vehicle, pull the hoodrelease handle located under thebottom left corner of the instrumentpanel. 2. Go to the front of the vehicle and release the auxiliary latch that islocated under the front center of the hood. 3. Lift the hood. 2004 Explorer (exp) Owners Guide (pos...

IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT 4.0L SOHC V6 engine 1. Engine coolant reservoir 2. Engine oil filler cap 3. Power steering fluid reservoir 4. Brake fluid reservoir 5. Power distribution box 6. Battery 7. Engine oil dipstick 8. Air filter assembly 9. Windshield washer fluid reservoir...

WINDSHIELD WASHER FLUID Add fluid to fill the reservoir if thelevel is low. In very cold weather, donot fill the reservoir completely. Only use a washer fluid that meets Ford specification WSB-M8B16–A2.Refer to Lubricant specifications in the Capacities and specifications chapter. State or local reg...

ENGINE OIL Checking the engine oil Refer to the scheduled maintenance guide for the appropriate intervalsfor checking the engine oil. 1. Make sure the vehicle is on level ground. 2. Turn the engine off and wait a few minutes for the oil to drain into theoil pan. 3. Set the parking brake and ensure t...

• 4.6L V8 engine 6. Wipe the indicator clean. Insert the indicator fully, then remove itagain. • If the oil level is between the MIN and MAX marks, the oil level is acceptable, DO NOT ADD OIL. • If the oil level is below the MIN mark, add enough oil to raise the levelwithin the MIN-MAX range . • 4.0...

• 4.6L V8 engine • Oil levels above the MAX mark may cause engine damage. Some oilmust be removed from the engine by a service technician. 7. Put the indicator back in and ensure it is fully seated. Adding engine oil 1. Check the engine oil. For instructions, refer to Checking the engine oil in this...

Motorcraft SAE 5W-30 or an equivalent 5W-30 oil meeting Fordspecification WSS-M2C205–A. Do not use supplemental engine oil additives, cleaners or other enginetreatments. They are unnecessary and could lead to engine damage thatis not covered by Ford warranty. Change your engine oil according to the ...

For longer, trouble-free operation, keep the top of the battery clean anddry. Also, make certain the battery cables are always tightly fastened tothe battery terminals. If you see any corrosion on the battery or terminals, remove the cablesfrom the terminals and clean with a wire brush. You can neut...

5. Turn the A/C on and allow the engine to idle for at least one minute. 6. Drive the vehicle to complete the relearning process. • The vehicle may need to be driven to relearn the idle and fuel trimstrategy. • If you do not allow the engine to relearn its idle trim, the idlequality of your vehicle ...

60%, the engine parts could become damaged or not work properly. A 50–50 mixture of coolant and water provides the following: • Freeze protection down to -36° C (-34° F). • Boiling protection up to 129° C (265° F). • Protection against rust and other forms of corrosion. • Enables calibrated gauges t...

• Do not add extra inhibitors or additives to the coolant. These can be harmful and compromise the corrosion protection of the enginecoolant. For vehicles with overflow coolant systems with a non-pressurized capon the coolant recovery system, add coolant to the coolant recoveryreservoir when the eng...

system may have a leak. Operating an engine with a low level of coolantcan result in engine overheating and possible engine damage. Recycled engine coolant Ford Motor Company does NOT recommend the use of recycled enginecoolant in vehicles originally equipped with Motorcraft Premium GoldEngine Coola...

Unleaded Gasoline engines If you are experiencing starting, rough idle or hesitation driveabilityproblems during a cold start, try a different brand of “Regular” unleadedgasoline. “Premium” unleaded gasoline is not recommended (particularlyin the United States) because it may cause these problems to...

• If the fuel cap assembly is all one color (all black), it is a 1/8 turn cap. • If the fuel cap assembly is two color (black and white), it is a 1/4 turncap. When fueling your vehicle:1. Turn the engine off.2. Carefully turn the filler cap counterclockwise 1/8 or 1/4 of a turn untilit stops.3. Pull...

Filling the tank for FFV equipped vehicles Your vehicle will operate on both unleaded gasoline with an octane ratingof 87, or E-85 fuel, or any mixture of these two. For best results it isrecommended that you do not add less than 5 gallons of fuel whenrefueling. Observing this precaution will avoid ...

3. The fuel cap may not have been securely tightened. These temporary malfunctions can be corrected by filling the fuel tankwith good quality fuel and/or properly tightening the fuel cap. After threedriving cycles without these or any other temporary malfunctionspresent, the Check engine/Service eng...

• 4.0L SOHC V6 engine • 4.6L V8 engine 1. Start the engine and let it run until it reaches normal operatingtemperature (the engine coolant temperature gauge indicator will benear the center of the normal area between H and C). 2. While the engine idles, turn the steering wheel left and right several...

BRAKE FLUID RESERVOIR The fluid level will drop slowly asthe brakes wear, and will rise whenthe brake components are replaced.Fluid levels below the “MAX” linethat do not trigger the brake systemwarning lamp are within the normaloperating range, there is no need toadd fluid. If the fluid levels areo...

CHECKING AND ADDING TRANSFER CASE FLUID (IF EQUIPPED) 1. Clean the filler plug. 2. Remove the filler plug andinspect the fluid level. 3. Add only enough fluid throughthe filler opening so that the fluidlevel is at the bottom of theopening. Use only fluid that meets Ford specifications. Refer to Lubr...

The traction grade assigned to this tire is based onstraight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning or peak traction characteristics. Temperature A B C The temperature grades are A (the highest), B and C, representing thetire’s resistance to the gene...

2. 215: Indicates the nominal width of the tire in millimeters from sidewall edge to sidewall edge. In general, the larger the number, thewider the tire. 3. 65: Indicates the aspect ratio which gives the tire’s ratio of height to width. 4. R: Indicates a “radial” type tire. 5. 15: Indicates the whee...

Sometimes irregular tire wear can be corrected by rotating the tires. Note: If your tires show uneven wear ask a qualified technician at a Ford or Lincoln/Mercury dealership to check for and correct any wheelmisalignment, tire imbalance or mechanical problem involved before tirerotation. Note: Your ...

Changing tires with TPMS It is recommended that you alwayshave your tires serviced by a dealeror qualified technician. Each road tire is equipped with a tirepressure sensor mounted on thewheel inside the tire connectedto the valve stem. The tirepressure sensor must beunbolted from the wheel prior to...

Fluid Ford PartName Application Capacity Engine coolant 3 MotorcraftPremium GoldEngine Coolant(yellow-colored) 4.0L SOHC V6engine without auxiliary climatecontrol 15.4L (16.3quarts) 4.0L SOHC V6engine with auxiliary climatecontrol 17.2L (18.2quarts) 4.6L V8 engine without auxiliary climatecontrol 17...

2 Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amountof transmission fluid and fluid level should be checked by a qualifiedtechnician. 3 Add the coolant type originally equipped in your vehicle. 4 Limited Sl...

Item Ford PartName orequivalent Ford PartNumber FordSpecification Engine coolant MotorcraftPremium GoldEngine Coolant(yellow-colored) VC-7-A (U.S.,except CA andOR), VC-7-B (CAand OR only) WSS-M97B51-A1 4.0L Engine oil Motorcraft SAE5W30 SuperPremium MotorOil XO-5W30-QSP WSS-M2C205-Awith APICertifica...

Item Ford PartName orequivalent Ford PartNumber FordSpecification Transfer case(4X4) MotorcraftMERCON 威 Multi-PurposeATF XT-2-QDX MERCON 威 Transfer caseFront OutputSlip Shaft PremiumLong-LifeGrease XG-1-C or XG-1-K ESA-M1C75-B Windshieldwasher fluid MotorcraftPremiumWindshieldWasherConcentrate ZC—32...

VEHICLE DIMENSIONS Dimensions 4-Door 4x2 or 4x4 XLT Model mm(in.) (1) Overall length 4817 (189.6) (2) Overall width 1831 (72.1) (3) Maximum height* 1825 (71.9) (3) Maximum height* withcrossbar 1834 (72.2) (4) Wheelbase 2889 (113.7) (5) Track width, front 1547 (60.9) (5) Track width, rear 1556.5 (61....

Vehicle identification number The vehicle identification number(VIN) is a 17 digit combination ofletters and numbers. The VIN isattached to a metal tag and islocated on the driver sideinstrument panel. The VIN numberis also found on the Certificationlabel. (Please note that in thegraphic XXXX is rep...

Transmission/Transaxle code designations You can find a transmission/transaxle code on the vehicle certificationlabel which is located on the door pillar. The following table tells youwhich transmission or transaxle each code represents. Truck application: Code Transmission Description Manual transm...

Passenger car application: Code Transmission/Transaxle Description Front wheel drive manual transaxle R 5–speed overdrive (MTX75) W 5–speed overdrive (M5) Front wheel drive automatic transaxle A 4–speed overdrive (4F27E) E 4–speed overdrive (4FE) J 3–speed (Mazda) L 4–speed overdrive (AX4S) P 4–spee...

GENUINE FORD ACCESSORIES FOR YOUR VEHICLE A wide selection of Genuine Ford Accessories are available for your vehiclethrough your local authorized Ford or Ford of Canada dealer. These qualityaccessories have been specifically engineered to fulfill your automotiveneeds; they are custom designed to co...

A Accessory delay ..........................52 AdvanceTrac ..............................142 Air bag supplemental restraintsystem ................................115, 119 and child safety seats ............117description ......................115, 119disposal ....................................123d...

idle speed control ...................233lubricationspecifications ..................274, 276refill capacities ........................272service points ..................226–227starting after a collision .........181 Engine block heater .................139 Engine oil .................................