Fisher & Paykel RS7621SRK1 - Manuals

4 3  COMPONENTS LIST MI (miscellaneous items) pack  — included with the appliance. U S E R G U I D E N Z AU I N T E G R AT E D CO LU M N S RS4621F, RS6121F, RS7621F, RS6121S & RS7621S models 849165A BOOK UG REF Columns AA FA.indd 1 16/07/18 2:10 PM S E RV I C E & WA R R A N T Y S E RV I C E ...

5 3  COMPONENTS LIST Door handle kit   — not included with the appliance and must be purchased separately. EVO1 handle kit (CA: 24980) F&P (D3) handle kit (CA: 24979) M5 x 25 Pan Head Socket ScrewOR M5x25 hex screw M5 x 25 Pan Head Socket ScrewOR M5x25 hex screw M5 x 25 Pan Head Socket ScrewOR M...

6 3  COMPONENTS LIST Hinge change kit  — not included with the appliance and must be purchased separately. Hinge change assembly Hinge top pocket (1x) K05 Top adapter bracket (2x) Lower hinge bracket (2x) M5 Nut (2x) Alcove top bracket (2x) K05 Bottom adapter bracket (2x) Top (fixed) grille assembly...

7 4  PRODUCT DIMENSIONS AND SPECIFICATIONS RS46 RS61 RS76 PRODUCT DIMENSIONS mm mm mm A Overall height of product 2134 2134 2134 B Overall width of product 451 603 756 C Overall depth of product (excluding front door panel) 610 610 610 PRODUCT SPECIFICATIONS Door clearance 508 660 813 Weight (includ...

8 5  CABINETRY OPTIONS FRAMELESS CABINETRY (Frameless: Aligns the product/s with the cabinetry) FRAMED CABINETRY (Framed: Aligns the product/s with the frame of the cabinetry) Note: Images shown for single install. These options are also applicable for dual install. E D D E Frameless E D D E Framed

9 6  CAVITY DIMENSIONS SINGLE INSTALL DUAL INSTALL RS46 RS61 RS76 RS46 + RS61 RS46 + RS76 RS61 + RS61 RS61 + RS76 RS76 + RS76 CAVITY DIMENSIONS mm mm mm mm mm mm mm mm A Overall height of cavity 2134 2134 2134 2134 2134 2134 2134 2134 b Overall width of cavity 457 610 762 1067 1219 1219 1372 1524 c ...

10 7  DOOR AND TOE KICK PANEL DIMENSIONS RS46  RS61  RS76 DOOR PANEL DIMENSIONS (STAINLESS STEEL) mm mm mm A Height of door panel 2029 2029 2029 B Width of door panel 451 603 756 C Depth of door panel (excluding door handle) 19 19 19 DOOR PANEL DIMENSIONS (CUSTOM)* A Height of door panel 1978 – 2080...

11 7  DOOR AND TOE KICK PANEL DIMENSIONS E F E E E F 102mm toe kick height 152mm toe kick height 51mm toe kick height (with extra lower grille attached) 73 – 102mm toe kick depth measured from the from rear of door panel A C B D E SINGLE INSTALL A C B B D E DUAL INSTALL

12 8  CUSTOM DOOR PANEL DIMENSIONS Custom door panel dimensions Dimensions apply for the preparation and installation of Custom door panels. For Dwg and Dxf files of the below panel preparation download the folder on http://thekitchentools.fisherpaykel.com IMPORTANT! ● ● The thickness of the custom ...

14 9  DOOR OPENING ROTATION RS46 RS61 RS76 DOOR OPENING AND CLEARANCE DIMENSIONS mm mm mm A Width of door ( 90° open) measured from front of door 508 660 813 b Minimum door clearance* to adjacent wall** (115° — full internal access) 292 356 419 c Minimum door clearance* to adjacent wall** (90° — red...

15 !0  ELECTRICAL AND PLUMBING ELECTRICAL SPECIFICATIONS FREEZER REFRIGERATOR Supply 230 VAC, 50 Hz 230 VAC, 50 Hz Service 10 amp circuit 10 amp circuit Socket 3-pin earthing-type 3-pin earthing-type Power cord (excluding plug) 2190mm 2190mm PLUMBING SPECIFICATIONS FREEZER REFRIGERATOR Supply 1/2” B...

16 !1  BEFORE INSTALLATION IMPORTANT! ● ● Ensure your appliance is not exposed to any heat generating appliance eg cooktop, oven or dishwasher. ● ● The appliance has front and rear rollers for moving the appliance forward and backward. Do not move the appliance sideways to avoid damaging the rollers...

17 !2  UNPACKING AND MOVING YOUR PRODUCT 1 Remove the top of the packaging carton. Cut along the cut lines and remove the carton and EPS (Expanded Polystyrene) foam. 2 Remove pre-packed install parts (door panel side extrusion and side trim assembly, centre trim assembly, dual install joiner kit) ta...

18 IMPORTANT! Make sure the bracket overlaps the appliance by a minimum 180mm for a secure hold ( E) . If the minimum 180mm overlap cannot be achieved, install a solid spacer to the wall stud behind the bracket ( F) . !3  ATTACH THE ANTI-TIP BRACKET min 180mm E Bracket Appliance Wall F Bracket Space...

19 !4  CONNECT TO WATER AND POWER SUPPLY F A WARNING! ● ● The water connection instructions below are intended only for the professional installer. ● ● WARNING — connect to potable drinkable water supply only. ● ● DO NOT install on line pressure above 120psi (827kPa) or below 22psi (150kPa). ● ● DO ...

20 !5  SINGLE INSTALLATION Installing depth alignment gauges Note: The alignment gauges are only temporary and removable after installation. Required components/tools: ● ● 4x Cabinet depth alignment gauges ● ● Cross-head screwdriver 1 Loosen the screws at the right and left, top and bottom corners o...

21 C !5  SINGLE INSTALLATION IMPORTANT! ● ● Ensure that the hose is not run over when moving the appliance/s to prevent damage and possible water leaks. ● ● Use low speed, low torque setting when using powered drill. ● ● Ensure power cord is not damaged during installation. Positioning the appliance...

22 !5  SINGLE INSTALLATION 2 Continue turning the adjusting screws alternately between front and rear feet until you achieve the correct alignment. 3 Once you are satisfied with the alignment, raise the height of the appliance by alternately adjusting the front and rear feet until the top surface co...

23 Attach central spacer to cabinetry Note: The spacer must be attached between the first and second appliances. The attachment location of the spacer to the alcove ceiling depends on the model of each appliance. Central spacer Depth alignment gauge 1 Measure from the alcove side towards the centre....

24 !6  DUAL INSTALLATION Installing depth alignment gauges Note: The alignment gauges are only temporary and removable after installation. Required components/tools: ● ● 4x Depth alignment gauges ● ● Cross-head screwdriver 1 Loosen the screws at the right and left, top and bottom corners of the door...

25 !6  DUAL INSTALLATION Positioning and aligning the first appliance inside the cabinetry 1 Coil the water hose flat behind the appliance. (Refer to ‘Connect to water and power supply’). 2 Before rolling the appliance, insert a barbed plug into a large hole on the cabinetry side of the first applia...

26 !6  DUAL INSTALLATION IMPORTANT! ● ● Ensure the doors are in line with the cabinetry front and the appliance is centred. ● ● All four corners of the appliance must be supported firmly onto the floor to eliminate any movement. Installing the appliance on a soft, uneven, or not level floor may caus...

28 !6  DUAL INSTALLATION 2 Continue turning the adjusting screws alternately between front and rear feet until you achieve the correct alignment of the second appliance with the first appliance. 3 Once you are satisfied with the alignment, raise the height of the appliance by alternately adjusting t...

29 !6  DUAL INSTALLATION Fixing the second appliance inside the cabinetry 1 Fix the top caps of first and second appliances to the central spacer with the top joiner fastener kit ( A ). 2 Fix the bottom joiner brackets of both appliances together with the bottom joiner kit ( B ). – Place the plastic...

30 !7  INSTALL WATER FILTER 1 Remove the water filter packaging. 2 Pull the filter tool gently to dislodge from the front of the appliance ( A ). 3 Insert the water filter all the way into the filter casing and press firmly until the filter head is pushed further inside the casing ( B ). 4 Using the...

31 !8  INSTALL BRACKETS TO DOOR PANEL (STAINLESS STEEL) IMPORTANT! Ensure to protect the finish of the Fisher & Paykel Stainless Steel door panels. Leave the protective film on the panels when hanging and remove the film only when the installation is complete. Required components/tools: ● ● Door...

33 @0  INSTALL DOOR PANELS Attach the door handle 1 For Stainless steel door panel: ● ● Remove the plastic plugs from handle holes (x4). ● ● Align the handle to the holes and secure with M5x25 hex screws ( A ). For Custom panels: ● ● Fix the handle with M5x25 hex screws from the inner edge of the pa...

34 @0  INSTALL DOOR PANELS Adjust the door panel Note: All door panels have full axis adjustment to ensure they are flush with adjacent walls. 1 To adjust the height of the door panel relative to the door, use M4 hex key to turn the top M8 screw ( A ) clockwise to lower or counter-clockwise to raise...

35 @1  INSTALL TOE KICK 4 Place the toe kick in front of the mounting plate. Ensure that the spacers at back of the toe kick are aligned with the magnets ( E ). – For custom toe kick, skip step 3 as spacers are not needed. 5 Attach the toe kick by pressing onto the mounting plate ( F ). – For stainl...

36 @2  INSTALL TOE KICK GRILLE Adjusting the toe kick grille 1 Loosen the cap screws of the adjustment brackets from both sides of the plinth using a hex key ( A ). 2 Adjust the toe kick to the desired depth by moving it forward/backward ( B ). 3 Re-tighten the cap screws of the adjustment brackets ...

37 @3  INSTALL CABINET TRIMS Install the side trims Note: Four (4) dual-lock strips are pre-installed along each side trim. 4 Slot trim in behind top hinge pocket ( E ), then press ( F ) adhesive to cavity ensuring trim is also tight against appliance inner face. Note: Press firmly on the dual-lock ...

38 @3  INSTALL CABINET TRIMS Install the top trim 1 Slide the top trim into hinge pocket of the cabinet ( A ), and then engage the dual lock at the non-hinge side ( B ). B A Install the centre trims (for dual install only) Note: Four (4) dual-lock strips are pre-installed along the centre trim. 2 Po...

39 @4  INSTALL FLOW DIVIDER AND DOOR TRIMS Required components/tools: ● ● 1x Door flow divider ● ● 1x Flow divider cap ● ● 1x 8Gx16 Countersunk screw ● ● 2x Trim caps ● ● Top door panel extrusion ● ● 2x Door panel side extrusion ● ● Saw ● ● File IMPORTANT! The door flow divider is pre-assembled to t...

40 Removing the door 1 Release the hinge spring by turning the star T20 screws in the hinge to the “0” position ( A ). @5  OPTIONAL — CHANGING OVER DOOR HINGES You have the option to change the door hinge side of your appliance from right hand hinge to left hand hinge or vice versa. A hinge change k...

41 @5  OPTIONAL — CHANGING OVER DOOR HINGES Removing the top door hinge 1 Rotate the top hinge ( A ) outwards and remove the top hinge pocket cover ( B ) using the flat head screwdriver in the slot of the cover. 2 Remove the hinge by unscrewing the M5x12 pan head screws (2x) ( C ), and set aside for...

42 Required components/tools: ● ● Star T20 screwdriver ● ● Flat head screwdriver Moving the sensor housing (RS46 & RS61 only) @5  OPTIONAL — CHANGING OVER DOOR HINGES G A B C E F D 1 Unclip the reed switch from the housing ( A ). 2 Unhook the interceptor board harness from sensor housing so harn...

43 @5  OPTIONAL — CHANGING OVER DOOR HINGES Top hinge installation 1 Reinstall the hinge top bracket and bracket spacer with M5x12 countersunk screws ( A ) on the new hinge side at the other side of the appliance. 2 Install the new hinge pocket and alcove top bracket on the new hinge side using two ...

44 @5  OPTIONAL — CHANGING OVER DOOR HINGES Required components/tools: ● ● 2x K05 Top adapter bracket ● ● 2x K05 Bottom adapter bracket ● ● Star T20 screwdriver ● ● Flat head screwdriver Door brackets 1 Remove the top adapter bracket from the top of the door by unscrewing M5x10 screws (4x) ( A ). 2 ...

45 @5  OPTIONAL — CHANGING OVER DOOR HINGES Top hinge A Bottom hinge A Door installation 1 Reinstall the door to the appliance by fixing M6x10 hex screws (4x) into the hinges ( A ). Required components/tools: ● ● Star T20 screwdriver ● ● Flat head screwdriver ● ● Hex driver B 2 Activate the hinge sp...

46 @6  FINAL CHECKLIST TO BE COMPLETED BY THE INSTALLER All models Check all parts are installed. Ensure the appliance is level. Ensure the appliance is securely fastened to the cabinetry with the supplied anti-tip bracket and fittings. Ensure the door/drawer can open and close freely with no resist...