Fisher & Paykel CG903ML - Manuals

5 Safety and warnings Important safety instructions Use this appliance only for its intended purpose as described in this user guide. Do not modify this appliance. Household appliances are not intended to be played with by children. Children, or persons with a disability which limits their ability t...

6 Using your cooktop Operating the cooktop 1 Press the on/off power button. 2 Press the control dial. A tone will sound. 4 While the burner-ready light is glowing, turn the dial clockwise to light the gas. Note: if the burner-ready light goes out before you light the gas, press the dial again. 5 Pla...

8 Using your cooktop ...3 seconds 8b To lower the pan supports automatically after you have finished cooking, press and hold the dial for three seconds while the burner is lit. The flame will go out and the pan supports, if cool enough, will lower. If the supports are hot, the hot warning light will...

9 Important! Do not use pans with jagged edges or drag pans across the ceramic glass surface as this can scratch the glass. Do not drag pans backwards and forwards across the pan support pins, burner heads and trim rings eg when placing and removing pans or sauteing food, as this can damage them, es...

10 Cooking guidelines Searing steak To cook juicy flavoursome steaks: 1 Stand the meat at room temperature for about 20 minutes before cooking. 2 Heat up a heavy-based frying pan. 3 Brush both sides of the steak with oil. Drizzle a small amount of oil into the hot pan and then lower the meat onto th...

11 Cooking guidelines Fig.2 Wok stand is placed onto the raised wok burner pan supports Using a wok Important! Use your wok only on the wok burner. When using a wok, always use the wok stand. Make sure the wok stand is fitted correctly over the raised pan supports. (see Fig.2) Do not use a wok large...

12 Your cooktop has been designed to combine the easy-care cleaning of ceramic glass withthe performance of gas. Important! Read through the ‘Safety and warnings’ and ‘Care and cleaning’ sections carefully before doing any cleaning or maintenance. To avoid the risk of electrical shock or burners bei...

13 Melts and spills that require immediate attention Anything that melts onto the ceramic glass surface or food spills with a high sugar content may cause pitting of the ceramic glass surface if left there to cool. Remove these spills immediately with a fish slice, palette knife or cooktop scraper. ...

14 Care and cleaning Cleaning the pan supports (the pan support pins and burner head) Important! Do not wash pan supports in a dishwasher or use dishwashing machine detergent to clean these parts so as not to remove the easy-clean coating. After reassembling any burner, always lower the burner befor...

15 Care and cleaning To clean the burner head 1 Lift out the burner head and clean with a cloth or scourer. The burner head gets much hotter than the pan support pins and for this reason it is not finished with an easy-clean coating. If cooking splatter and spills get burnt onto the burner head, scr...

16 The cooktop has three pre-set sound preference settings (tones, tone volume, feedback tones). Changing the settings To change the settings, follow these steps. 1 Hold down the on/off power button for two seconds. This sets the keylock. Once you are in the Sound preference mode , the on/off light ...

17 Sound Settings Default option Alternative option 1 TONES (You can turn the cooktop tones on or off ) 2 TONE VOLUME (You can change the cooktop tones’ volume from normal to quiet) 3 FEEDBACK TONES (You can turn feedback tones for high/low flame settings and burner motion, on or off ) Sound prefere...

18 Troubleshooting Troubleshooting chart Problem Possible causes What to do The pan supports will not rise. Power is not turned on. Turn on the cooktop. The pan supports, on/off power button, or control dials are stuck. Food has been spilled on these parts. See ‘Care and cleaning’. A flame is extrem...

20 Alert codes Your cooktop can self-diagnose and then communicate this information to you. If there is a problem, the cooktop will: shut one or all burners off beep every three seconds flash one or more lights display an alert code on the control display(s). If only one burner has a problem, then i...

21 Alert code Possible causes What to do The pan is too heavy for the pan supports to lift. The pan support pins are stuck in the down position because of spilled food. The pan supports are stuck in the up position. Remove the pan, let the pan supports rise up, and then place the pan back on the pan...

22 Alert code Possible causes What to do There is not enough air getting to the burners. Check that the underside of the cooktop has direct unrestricted ventilation to the room where the cooktop is installed nothing is obstructing the air filter mesh on the underside of the cooktop the airway to the...

23 Warranty and service Before you call for service or assistance ... Check the things you can do yourself. Refer to the installation instructions and your user guide and check that: 1 your product is correctly installed 2 you are familiar with its normal operation. If after checking these points yo...