Fisher & Paykel CG302D - Manuals

Page 2 - IMPORTANT SAFETY INSTRUCTIONS!; SAFETY AND WARNINGS

2 WARNING! Electrical shock hazard Before carrying out any work on the electrical section of the appliance, it must be disconnected from the mains electricity supply. Connection to a good earth wiring system is absolutely essential andmandatory. Alterations to the domestic wiring system must only be...

Page 3 - PARTS SUPPLIED; Installing multiple products

3 PARTS SUPPLIED 2 Small pan support (1) (some models only) Dual Wok Pan support (Models with a Dual Wok only) Pan support (not supplied with Dual Wok only models) Wok stand (1) Fibre washer (1) Elbow 1/2 “ BSP external thread (1) Clamping brackets (4)and screws (4) NG regulator (1) (NG models only)...

Page 4 - GAS RATE SUMMARY-MODELS

4 3 GAS RATE SUMMARY-MODELS CG603D CG302D CG451D CG604D CG905D CG903D CG752D SEMI-RAPID SEMI-RAPID SEMI-RAPID SEMI-RAPID SEMI-RAPID SEMI-RAPID SEMI-RAPID SEMI-RAPID MINI WOK RAPID DUAL WOK DUAL WOK DUAL WOK DUAL WOK DUAL WOK DUAL WOK DUAL WOK AUX AUX AUX

Page 5 - GAS RATE SUMMARY; NG; NG

5 3 GAS RATE SUMMARY All appliances are factory set for Natural gas or LPG and are not convertible. Check the appliance data label. CG302D CG451D CG603D BURNER GAS TYPE AUX SEMI-RAPID DUAL WOK SEMI-RAPID DUAL WOK Jet size (mm) Nominal rating (MJ/h) Jet size (mm) Nominal rating (MJ/h) Jet size (mm) N...

Page 6 - PRODUCT & CABINETRY DIMENSIONS; Product and cabinetry dimensions

6 A K D B E C G F J H I 4 PRODUCT & CABINETRY DIMENSIONS Product and cabinetry dimensions (mm) C G302D C G451D C G603D C G604D C G752D C G903D C G905D A overall height of product (excluding burners, dials and pan supports) 64 64 64 64 64 64 64 B overall width of product 300 450 600 600 750 900 9...

Page 7 - CLEARANCE DIMENSIONS; Clearance dimensions

7 5 CLEARANCE DIMENSIONS Clearance dimensions (mm) C G302D C G451D C G603D C G604D C G752D C G903D C G905D A minimum clearance from left edge of cutout to nearest combustible surface 120 60 115 130 115 115 130 B minimum clearance from right edge of cutout to nearest combustible surface 120 60 115 11...

Page 8 - FLUSH MOUNTING INSTALLATION (NOT RECOMMENDED)

8 FLUSH MOUNTING INSTALLATION (NOT RECOMMENDED) 6 A K D B E C F J G G M N H H I L WARNING! We do not recommend flush mounting and sealing as servicing requires the cooktop to be removed from the benchtop. The owner carries all risk for flush mounting the cooktop. The owner must ensure the cooktop ha...

Page 11 - GAS; NG Models; LPG Models

11 11 13 12 14 FIT CLAMPING BRACKETS BASED ON THE BENCHTOP THICKNESS CONNECT TO GAS SUPPLY SECURE TO BENCHTOP CHECK ALL CONNECTIONS FOR GAS LEAKS 16-20mm 20-30mm x 4 30-40mm 40mm+ view from below x 4 Repeat on all the other sides GAS ON GAS ON NG Models ALL Models Make sure the connection point will...

Page 12 - AFFIX DUPLICATE DATA LABEL SOMEWHERE; yellow tip

12 Duplicate data label 15 17 16 AFFIX DUPLICATE DATA LABEL SOMEWHERE ACCESSIBLE & PLUG COOKTOP IN TEST OPERATION FIT PAN SUPPORTS Ensure the pan supports are located securely and in the correct orientation (refer to User guide) yellow tip lifting off good flame To check that the ignition system...

Page 13 - FINAL CHECKLIST; SAVE THESE INSTRUCTIONS; TO BE COMPLETED BY THE INSTALLER; LEAVE THESE INSTRUCTIONS WITH THE CUSTOMER

13 18 FINAL CHECKLIST Important! SAVE THESE INSTRUCTIONS The models shown in this document may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please visit our local website listed at the end of th...

Fisher & Paykel CG302D - Manuals

Manuals:

Manual Fisher & Paykel CG302D

Summary

Fisher & Paykel Manuals