First Alert Model GCO1 - Manuals

First Alert Model GCO1 – Manual in PDF format online.

Manuals:

Manual First Alert Model GCO1

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7

Summary

Page 2 - WHERE THIS ALARM SHOULD NOT BE INSTALLED; • Make sure the alarm is not receiving excessively noisy power.; HOW TO INSTALL THIS GAS/CO ALARM; NOTE: Do not cover the Alarm with a curtain.

2 INSTALLATION, Continued See “Avoiding Dead Air Spaces” for more information. NOTE: For any location, make sure no door or other obstruction could keepcarbon monoxide or gas from reaching the Alarm. This unit should receive continuous electrical power. (The battery ismeant for emergency back-up onl...

Page 3 - IF YOUR GAS/CO ALARM SOUNDS; WHAT TO DO IF CARBON MONOXIDE IS DETECTED; TEST THE ALARM; USING THE REMOTE CONTROL TEST/SILENCE FEATURE; HOW YOUR ALARM WORKS; THE COVER OF YOUR ALARM

1. Test/Silence Button: Press and hold to activate test, or to silence the alarm. 2. POWER Light (GREEN) 3. Display 4. (Behind the Cover) Alarm Horn: 85dB audible alarmfor test, alarm, and unit malfunction warning. 5. Display Button: Press to recall highest CO levelrecorded 6. Battery Compartment US...

Page 4 - UNDERSTANDING THE LIGHT, HORN, AND DISPLAY PATTERNS; Horn; USING THE PEAK CO MEMORY

UNDERSTANDING THE LIGHT, HORN, AND DISPLAY PATTERNS Horn Display Condition LED NORMAL AC POWER LED is Green. BATTERY BACK-UP POWER LED is Off, flashing Green once every45 seconds DURING TESTING LED flashes Red in sync with thehorn, simulating an Alarm condition:first gas then CO LOW OR MISSING BATTE...

First Alert Manuals