First Alert FA168CP-CN - Manual

Page 2 - Special Messages

– 2 – TO ENTER PROGRAMMING MODE: Local programming requires the use of an alpha keypad connected to the keypad terminals on the control. 1. POWER UP, then depress [ ✱ ] and [#] both at once, within 50 seconds of powering up. OR 2. Initially, key: Installer Code (default = 4112) plus 8 + 0 + 0. (if ✱...

Page 4 - Primary Phone No. Second; SYSTEM STATUS REPORT CODES (

– 4 – NOTE: Entry of a number other than one specified will give unpredictable results. For fields *43-*46: Enter 0–9; #+11 for B; #+12 for C; #+13 for D; #+14 for E; #+15 for F. Enter [ ✱ ] as the fourth digit if a 3-digit account number (for 3+1 dialer reporting format) is used. Enter 0 as the fir...

Page 6 - RING COUNT FOR DOWNLOADING; and open\closes for all users

– 6 – DOWNLOAD INFORMATION ( ✱ 94, ✱ 95) ✱ 94 DOWNLOAD PHONE No. | | | | | | | | | | | | | | | | | | | Enter up to 20 digits, 0–9; #+11 for ' ✱ '; #+12 for '#'; #+13 for a 2-second pause. Do not fill unused spaces. If fewer than 20 digits, exit field by pressing ✱ (and press 95, if entering next fie...

Page 7 - unpredictable results.; 97 EXIT TIME DISPLAY INTERVAL

– 7 – CONFIGURABLE ZONE TYPE OPTIONS (*182-*185) ✱ 182 CONFIGURABLE ZONE TYPE 90 1 2 3 4 5 6 7 8 9 10 Enter the appropriate value for each entry, 1-10, based on the charts provided onnext page. Each entry is the sum of the values of its selected options(0-9, #+10=10, #+11=11, #+12=12, #+13=13, #+14=...

Page 8 - Configurable Zone Types Worksheets; Entry Zone Type 90; Zone Conditions Represented

– 8 – Configurable Zone Types Worksheets Configurable zone types 90 and 91 can be programmed via downloader software or from a keypad using datafields*182-*185. Configurable zone types 92 and 93 (FA168C only) can only be programmed using the downloadersoftware. Programming Configurable Zone Type opt...

Page 9 - Reserved Zones

– 9 – *56 ZONE PROGRAMMING WORKSHEET (FA148CP supports up to 32 zones: 1-6, 9-34) [default shown in brackets] Zone Zn Type Part.Report Input Type Loop Rsp. Time Serial No. Location 1 [09] [1] [HW] [1] 2 [01] [1] [HW] [1] 3 [03] [1] [HW] [1] 4 [03] [1] [HW] [1] 5 [03] [1] [HW] [1] 6 [03] [1] [HW] [1]...

Page 10 - *57 FUNCTION KEY PROGRAMMING; OUTPUT RELAYS/POWERLINE CARRIER DEVICES WORKSHEET FOR; ZONE LISTS FOR OUTPUT DEVICES; Record desired zone numbers below, noting that a list may include; Contains These Zones...

– 10 – *57 FUNCTION KEY PROGRAMMING Option Function A B C D Comments 01 Paging 02 Time Display 03 Arm AWAY 04 Arm STAY 05 Arm NIGHT-STAY 06 Step Arming 07 Device Activation Device: 08 Comm. Test 09 Macro Key 1 10 Macro Key 2 11 Macro Key 3 12 Macro Key 4 00 Emergency Keys: Personal EmergencySilent A...

Page 11 - 0 OUTPUT DEFINITIONS; 7 must be programmed with a House Code.; Tampers of expansion units cannot be used to operate devices.

– 11 – ✱ 80 OUTPUT DEFINITIONS Fill in the required data on the worksheet below and follow the programming procedure in the installation manual as youenter the data during the displays and prompts that appear in sequence.Notes: 1. For Relays, 4229 and 4204 devices are programmed in *79, *80, and *81...

Page 12 - Zone Type Definitions

– 12 – Zone Type Definitions Type 00 Zone Not Used Use this zone type if the zone is not used. Type 01 Entry/Exit Burglary #1 • Assign to zones that are used for primary entry and exit. • Provides entry delay if the control is armed in the Away or Stay modes. • No entry delay is provided when the pa...

Page 13 - Schedules

– 13 – Type 21 Arm-Away • Arms the system in Away mode when the zone is activated. • Pushbutton units send the user number to the central station when arming or disarming. • User code for button must be assigned. Type 22 Disarm • Disarms the system when the zone is activated. • User code for button ...

Page 14 - ALPHA VOCABULARY LIST (For Entering Zone Descriptors)

– 14 – ALPHA VOCABULARY LIST (For Entering Zone Descriptors) 000 (Word Space) – A – • 001 AIR • 002 ALARM 004 ALLEY 005 AMBUSH • 006 AREA • 007 APARTMENT • 009 ATTIC 010 AUDIO – B – • 012 BABY • 013 BACK • 014 BAR • 016 BASEMENT • 017 BATHROOM • 018 BED • 019 BEDROOM 020 BELL • 021 BLOWER • 022 BOIL...

Page 15 - 800 Series Transmitter Input Loop Identification; Each; Transmitter inputs entered as:; Table of Device Addresses; Address

– 15 – 5800 Series Transmitter Input Loop Identification • All of the transmitters illustrated below have one or more unique factory assigned input (loop) ID codes. Each of the inputs requires its own programming zone (e.g., a 5804's four inputs require four programming zones). • Transmitter inputs ...

Page 16 - A DIVISION OF PITTWAY CORPORATION

CLASS 2 PLUG-IN TRANSFORMER 16.5V A C , 25V A (e .g. 1321). (USE No . 1321CN IN CANAD A) T O 110V A C UNSWITCHED OUTLET (24HR) + THIS EQ UIPMENT SHOULD BE INST ALLED IN A CCORD ANCE WITH THE NA TIONAL FIRE PR O TECTION ASSOCIA TION'S ST AND ARD 72, CHAPTER 2 (NA TIONAL FIRE PR O TECTION ASSOCIA TI...

First Alert FA168CP-CN - Manual

Table of Contents:

Summary

Other First Alert Models