Extron MTP 1500RL 15HD RS SEQ - Manuals

Extron MTP 1500RL 15HD RS SEQ – Manual in PDF format online.

Manuals:

Manual

Manual Extron MTP 1500RL 15HD RS SEQ

Summary

Page 2 - Precautions/Safety Instructions; Precautions; Safety Instructions • English; Achtung; Vorsicht; Instrucciones de seguridad • Español; 安全须知; 注意

Precautions/Safety Instructions Precautions This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the p...

Page 3 - FCC Class A Notice; This device may not cause harmful interference.; NOTE; the unit to ensure compliance with FCC emissions limits.; click here; Information

FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interferen...

Conventions Used in this Guide In this user guide, the following are used: CAUTION: A caution indicates a potential hazard to equipment or data. NOTE: A note draws attention to important information. TIP: A tip provides a suggestion to make working with the application easier. WARNING: A warning war...

Page 5 - Contents; Introduction; Power Supply Wiring; Operation; SEQ receiver skew compensation; Reference Information; Specifications; Mounting; UL Guidelines for Rack Mounting

Contents Introduction ............................................................ 1 MTP 1500RL 15HD RS SEQ Description ............... 1 Features .......................................................... 1Transmission Distance ..................................... 2 Application Diagram ..............

Page 7 - efers specifically to the MTP transmitter; Features; Compatible with HDTV component video, bi-level or tri-level sync

Introduction This guide details the installation and operation of the Extron MTP 1500RL 15HD RS SEQ Twisted Pair receiver with audio and skew equalization In this guide the following terms are used: z “Transmitter” r efers specifically to the MTP transmitter . z “Receiver” or “SEQ receiver” refers s...

Page 8 - Transmission Distance; Video Format; Maximum Transmission Distances; e that they comply with Category 5 specifications.

Transmission Distance The maximum transmission distance is determined by the frequency and resolution of the transmitted signal. The table below shows the maximum transmission distances (in feet and meters) and the transmitter Pre-peak switch positions using Extron Enhanced Skew-Free AV UTP cable or...

Page 9 - Extron; Extron; Application Diagram; Typical MTP 1500RL 15HD RS SEQ Application

POWE R 12V 1.0A MA X RS-232 Rx Tx OUTPUT INPUT BUFFERED OUTPUT MTP 1500RL 15HD RS SEQ H + V + CSYN C SOG VIDE O EN D BI-232 ON MTP MTP PO WE R 12V 1.0A MA X RS-232 Rx Tx OUTPUT INPUT BUFFERED OUTPUT MTP 1500RL 15HD RS SEQ H + V + CSYN C SOG VIDE O EN D BI-232 ON MTP MTP INPU T Tx Rx RS -23 2 MONITO ...

Page 10 - Rear Panel Features; MTP 1500RL RS SEQ Receiver Rear Panel Features; — Plug the included external 12 VDC, 1 A, power supply into this; Power Supply Wiring” section; Always use a power supply supplied or specified by Extron. Use of an; Input connector; MTP 1500RL 15HD RS SEQ• Installation and Setup

Installation and Setup This section describes how to connect applicable cables to the MTP 1500RL 15HD RS SEQ receiver. It covers: z Rear Panel Features z Power Supply Wiring z TP Cable Termination Rear Panel Features The illustration below shows the rear panel of the MTP 1500RL 15HD RS SEQ receiver....

Page 11 - resolution video device to this 15-pin HD connector for RGB output.; End unit switch; MTP 1500RL 15HD RS SEQ • Installation and Setup

NOTE: In a daisy-chain, the maximum distance from video source to display device should not exceed 1500 feet. d High resolution video output connector — Connect a projector or other high resolution video device to this 15-pin HD connector for RGB output. NOTE: See DIP switch settings for signal form...

Page 12 - Wire the supplied male power connector (plug) as in shown below.; Power Connector Wiring; The two power cord wires must be kept separate while the power

Power Supply Wiring NOTE: This product is intended to be supplied by a UL Listed power supply and output rated at 12 VDC, 1 A. Wire the supplied male power connector (plug) as in shown below. 12V 1.0 A MAX POWER Rear PanelPower Receptacle DC Power Cord Captive Screw Connector AC Power Cord Ground +1...

Page 13 - TP Cable Termination; standards for all connections.

TP Cable Termination NOTE: RJ-45 termination must comply with TIA/EIA T568A or TIA/EIA T568B wiring standards for all connections. The figure below details the recommended termination of TP cables with RJ-45 connectors in accordance with the TIA/EIA T568A or TIA/EIA T568B wiring standards. Either st...

Page 14 - This section describes the operation details for the; Front Panel Controls and Indicators; Front panel features are shown below.; MTP 1500RL 15HD RS SEQ Receiver Front Panel; — Indicates power is applied to the MTP.; Select button; — This recessed button selects the red, green, or blue video signal to

Operation This section describes the operation details for the MTP 1500RL RS SEQ receiver . It covers: z Front Panel Controls and Indicators z Peaking and Level Adjustment z Skew Delay Compensation Front Panel Controls and Indicators Front panel features are shown below. MTP 1500RL SERIES RGB PEAKIN...

Page 15 - Watch the displayed image to observe the steps of delay.; Level control; Peaking and Level Adjustment; Set the gain adjustment so that a white field video signal is +0.7

d Adjust skew control — This control delays the selected red, green, or blue video signal up to a maximum of 62 nanoseconds (ns), made in 2 ns incremental steps. Rotate the control counterclockwise to reduce the delay or clockwise to increase it (see “ Skew Delay Compensation ” for details). NOTES: ...

Page 16 - Skew Delay Compensation; ed with test equipment or identified by viewing; SEt the skew delay to zero for red, green, and blue as follows:

Skew Delay Compensation CAT 5, 5e and CAT 6 cable can lead to registration errors between the red, green, and blue video signals. Pair skew can be measur ed with test equipment or identified by viewing a crosshatch test pattern to determine if either the red, green, or blue video image leads (appear...

Page 17 - This section provides information about:; Video; Gain; Video input — see MTP Series transmitters specifications; composite video; Sync; MTP 1500RL 15HD RS SEQ • Reference Information

Reference Information This section provides information about: z Specifications z Part Numbers and Accessories Specifications Video Gain ............................................... Unity Number/signal type ........................ 1 set of proprietary analog signalsConnectors ......................

Page 18 - General; Regulatory compliance

Control/remote — external device (pass-through, unidirectional or bidirectional) Serial control ports Input/output ............................ 1 set of proprietary signals on a female RJ-45 jack Output/input ........................... RS-232 via (1) 3.5 mm, 3 pole captive screw connector Baud rate...

Page 19 - Part Numbers and Accessories; Included Parts; mm, 3-pole captive screw connector for RS 232 connections; Optional Parts and Accessories; Description; Accessories; AV cable

Part Numbers and Accessories Included Parts Description Part Number MTP 1500RL 15HD RS SEQ receiver 60-960-02 External, 12 VDC, 1A power supply PS 1210 C 70-775-01 3.5 mm, 3-pole captive screw connector for RS 232 connections IEC power cord (1) MTP 1500RL 15HD RS SEQ Setup Guide Optional Parts and A...

Page 20 - Tabletop Placement; Elevated operating ambient temperature —; adequate air flow for safe operation.; Mechanical loading —

Mounting This section outlines the various mounting options available for the MTP 1500RL RS unit: z Tabletop Placement z Rack Mounting z Under-desk Mounting z Through-desk Mounting Tabletop Placement Attach the four provided rubber feet to the bottom of the unit and place it in any convenient locati...

Page 21 - Rack Mounting Procedure; To mount the device on a rack shelf; DO NOT; Mounting the MTP on a Standard Shelf; Through-desk Mounting

Rack Mounting Procedure The unit can be mounted on optional rack systems, including: z RSU 129: 9.5 inch deep, 1U rack shelf kit (part number 60-190-01 ) z RSU 126: 6 inch deep, 1U rack shelf kit (part number 60-190-10 ) To mount the device on a rack shelf 1. Remove the feet from the bottom of the M...

Page 22 - Extron Warranty; The Netherlands; USA; xtron

Warranty Contact Information Extron Warranty Extron Electronics warrants this product against defects in materials and workmanship for a period of three years from the date of purchase. In the event of malfunction during the warranty period attributable directly to faulty workmanship and/or material...