Extron MTP - Manuals

Extron MTP – Manual in PDF format online.

Manuals:

Manual

Manual Extron MTP

Summary

Page 2 - Precautions; Safety Instructions • English; Extron’s Warranty

Precautions This symbol is intended to alert the user of importantoperating and maintenance (servicing) instructionsin the literature provided with the equipment. This symbol is intended to alert the user of thepresence of uninsulated dangerous voltage withinthe product's enclosure that may present ...

Page 3 - FCC Class A Notice

FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device,pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) thisdevice may not cause harmful interference, and (2) this device must accept any interf...

Page 4 - Chapter 1 • Introduction; UL requirements; Chapter 3 • Operation; Table of Contents

i VersaTools ® MTP Series • Table of Contents Chapter 1 • Introduction .......................................................... 1-1 About the MTP Transmitters and Receivers ............ 1-2 TP Cable Advantages ........................................................... 1-2 Transmission Distance .....

Page 5 - Table of Contents, cont’d; VersaTools; Chapter One; Introduction; About the MTP Transmitters and Receivers

ii VersaTools ® MTP Series • Table of Contents Table of Contents, cont’d VersaTools ® MTP Series 1 Chapter One Introduction About the MTP Transmitters and Receivers TP Cable Advantages Transmission Distance 68-732-01 Rev. F 08 07 All trademarks mentioned in this manual are the properties of their re...

Page 6 - The MTPs are a part of the Extron VersaTools; TP Cable Advantages; Transmission Distance

VersaTools ® MTP Series • Introduction Introduction VersaTools ® MTP Series • Introduction About the MTP Transmitters and Receivers The Extron MTP transmitters and receivers provide a system forlong-distance distribution of NTSC, PAL, or SECAM video andaudio over Extron’s Enhanced Skew-Free ™ A/V UT...

Page 7 - Chapter Two; Installation; Signal Jumpers for Generational Comparibility

VersaTools ® MTP Series • Introduction Introduction, cont’d VersaTools ® MTP Series 2 Chapter Two Installation Signal Jumpers for Generational Comparibility Mounting Options Panel Features and Connections 1-4 • The video portion of any S-video transmitter’soutput is compatible with any S-video recei...

Page 8 - Figure 2-1 — Removing the MTP cover; For the receiver; , slide the cover slightly forward to clear; If the transmitter or receiver is an audio unit; Figure 2-2 — Removing the audio board; CAUTION; Signal Jumpers for Generational Compatibility; Shift the new transmitter ’s and/or receiver ’s jumpers if:; You want the units to transmit stereo audio.; Setting the jumpers on non AAP models

VersaTools ® MTP Series • Installation VersaTools ® MTP Series • Installation Installation 2-3 SHARP GAIN Figure 2-1 — Removing the MTP cover 2 . For the receiver , slide the cover slightly forward to clear the front panel adjustment knobs. 3 . Lift the cover straight up. 4 . If the transmitter or r...

Page 9 - Figure 2-3 — Video board jumper locations; If the receiver is an audio unit; , locate the jumper block on; Replace the cover and the four screws removed in step 1.

VersaTools ® MTP Series • Installation VersaTools ® MTP Series • Installation Installation, cont’d 2-5 2-4 5 . Locate the jumper blocks (figure 2-3) on the video board.Shift the jumper to the alternate location. Transmitter Front Panel Receiver Front Panel Receiver Rear Panel TransmitterRear Panel M...

Page 10 - Setting the jumpers on AAP transmitters; Figure 2-5 — Removing the MTP cover; Figure 2-6 — Removing the audio board; Figure 2-7 — Video board jumper locations

VersaTools ® MTP Series • Installation VersaTools ® MTP Series • Installation Installation, cont’d 2-6 Setting the jumpers on AAP transmitters 1 . Remove and retain the two screws that secure the backcover to the MTP (figure 2-5). 12V 0.5A MAX OUTPUT PO WER − + 1. Remove these screws. 2. Carefully p...

Page 11 - Mounting Options

VersaTools ® MTP Series • Installation VersaTools ® MTP Series • Installation Installation, cont’d MDA SERIES DISTRIB UTION AMPLIFIER Figure 2-9 — Mounting the MTPs on a standardrack shelf UL requirements The following Underwriters Laboratories (UL) requirementspertain to the installation of the MTP...

Page 12 - For projector mounting; Figure 2-11 — AAP mounting an MTP transmitter; Rack mounting instructions; Remove the feet from the bottom of the MTP, if installed.; Figure 2-10 — Desk and projector mounting the MTPs; For furniture mounting

VersaTools ® MTP Series • Installation VersaTools ® MTP Series • Installation Installation, cont’d d . Align the mounting screws with the slots in thebrackets and place the MTP against the surface, withthe screws through the bracket slots. e . Slide the MTP slightly forward or back, then tightenall ...

Page 13 - — Connect an S-video input to; Composite video connector (CV and AV models); — Connect a; . Longer bare wires can short; Panel Features and Connections; Transmitter input connections; Some transmitters do not have audio connections.; Figure 2-12 — Video and audio input connections

VersaTools ® MTP Series • Installation VersaTools ® MTP Series • Installation Installation, cont’d 1 S-video connector (SV models) — Connect an S-video input to this 4-pin mini DIN connector. 2 Composite video connector (CV and AV models) — Connect a composite video input to this connector (female R...

Page 14 - mm Stereo Plug Connector; Audio input RCA connectors (RCA and AAP models); Figure 2-15 — RCA audio connectors; Transmitter/receiver throughput connections; Figure 2-16 — Throughput connections; Transmitter output and receiver input connector —; Connect

VersaTools ® MTP Series • Installation VersaTools ® MTP Series • Installation Installation, cont’d 2-15 2-14 When making connections for the MTP from existingaudio cables, see figure 2-14 to identify the tip, ring, andsleeve wires in various connectors. A mono audioconnector consists of the tip and ...

Page 15 - TP cable termination; Side; Figure 2-17 — TP cable termination; Figure 2-18 — Power connections and indicators; Power connector —; Plug the external 12 VDC power supply; SECTION A–A; Figure 2-19 — Power connector wiring

VersaTools ® MTP Series • Installation VersaTools ® MTP Series • Installation Installation, cont’d 2-16 TP cable termination Figure 2-17 details the recommended termination of TP cableswith RJ-45 connectors in accordance with the TIA/EIA T 568Aor TIA/EIA T 568B wiring standards. You can use eitherst...

Page 16 - Power LED —; Indicates power is applied to the MTP.; Receiver output connections; Figure 2-20 — Output connector wiring; Composite video connector (CV and AV models) —; Connect a

VersaTools ® MTP Series • Installation VersaTools ® MTP Series • Installation Installation, cont’d If the transmitter and receiver are either older generationunits or jumper configured to the stereo audio position(compatible with the older units), only a single deviceneeds to be powered in a two-uni...

Page 17 - Chapter Three; Operation; Front Panel Features; Unbalanced Stereo Output; Some receivers do not have audio connections.

VersaTools ® MTP Series • Installation Installation, cont’d VersaTools ® MTP Series 3 Chapter Three Operation Front Panel Features Troubleshooting — Skew Delay Compensation 10 Captive screw audio connector (MTP R SV A, MTP R AV) —Connect a balanced or unbalanced audio device, such as anaudio amplifi...

Page 18 - Appendix A; Reference Information; Specifications; Figure 3-1 — MTP receiver front panels; All control knobs are removable to limit access if desired.; Troubleshooting — Skew Delay Compensation

VersaTools ® MTP Series • Operation Operation VersaTools ® MTP Series A Appendix A Reference Information Specifications Part Numbers 3-2 Front Panel Features SHARP C GAIN Y GAIN SHARP GAIN MTP R S-video ReceiverFront Panel MTP R Composite VideoReceiver Front Panel 2 3 3 1 2 3 1 Figure 3-1 — MTP rece...

Page 19 - Specifications, Part Numbers, and Accessories; Sync; Video

VersaTools ® MTP Series • Reference Information VersaTools ® MTP Series • Reference Information Specifications, Part Numbers, and Accessories A-3 Return loss .................................... <-35 dB @ 5 MHzDC offset ....................................... ±20 mV with input at 0 offset Sync St...

Page 20 - Rack mount; Specifications are subject to change without notice.; Connectors; General

VersaTools ® MTP Series • Reference Information VersaTools ® MTP Series • Reference Information Specifications, Part Numbers, Accessories, cont’d Rack mount MTP T AAP Series ........... Yes, with optional rack panel, or furniture- /wall-mountable with optional AAPmounting plates All other models ......

Page 21 - Skew compensation solutions; Part Numbers; MTP transmitters

VersaTools ® MTP Series • Reference Information VersaTools ® MTP Series • Reference Information Specifications, Part Numbers, Accessories, cont’d Cables/connectors Enhanced Skew-Free™ A/V UTP cables are notrecommended for Ethernet/LAN applications. Enhanced Skew-Free™ A/V cable Part number Enhanced ...